U35WF Product User Manual2. Product Features:※ USB3.0 high speed HDD enclosure※ WIFI storage device, private cloud※ Wireless router ※ NAS function※ Through USB port to read the data from U-disk, mobile hard disk drive and some other external storage device※ Can support multi devices simultaneously※ Can support samba and FTP share server perfectly※ Supports FAT32/NTFS/EXT4 3types disk format to read and write data through wireless( WiFi storage only can support this four formats, please must check and confirm the hard disk format is correct)

1. Product DescriptionThis product is WiFi mobile HDD enclosure also is wireless router. It 's a mobile device which can exchange data high-speed via USB port or WiFi network and computer, at the same time, this device has added WiFi transimission function and it has their own APP software for LAN and WAN ( remote) management, at the same time it can support the third party APP to bring more easy usage experience to customers. It can support

3. Structure

Description

USB2.0 expansion port:USB2.0 peripheral data transmission port

RJ45 WAN port:Insert the RJ45 network

USB3.0 interface:USB3.0 peripheral data transmission port

Master Switch:Open / close the

Reset switch:Wifi long after the start of this switch to release more than 5 seconds to restore the factory settings

DC power port:Insert the 12V / 2ADC power supply

Built-in WIFI indicator: Blinks when a device is connected

Built-in power indicator: Box On The lamp lights up

Step 2: Wired storage

Access to power, and then use the USB cable to connect the computer, you can store the files within the disk management.（New hard drive for the first time needs to be used for hard disk initialization, or not out disk, only Disk Manager can be seen. Specific steps can Baidu look at the "disk initialization." Disk initialization is recommended to format into EXFAT format, or FAT32 / NTFS / EXT4 three formats are also the other format will result in wireless storage, or can only read can not write. Unplug the USB cable after initialization is complete)

Note: Wired USB storage and wireless storage can not be used at the

Step 1: Install hard disk drive

First, unscrew the two captive screws on the box and remove

1

Then, insert the housing and tighten the two captive screws.

3

And then insert the hard disk into the corresponding interface,

2

And finally put himself on the box can be used normally.

4

4. Operate Steps

Step 3: Turn on the WiFi1.Access the power, press switch to turn on；2.Wait about 2 minutes to open WIFI, and then use your computer or phone connection to KIMAX - ***** named network;3.Use your computer or mobile phone to open the browser, enter 192.168.169.1 Enter, enter the password in the interface kimax login.

2

1

Step 4: Wireless Storage and Management

LAN Network Make sure the PC / phone / tablet is connected to the WIFI after the box.

Computer version: open the "My Computer", enter the address bar to enter the \\ 192.168.169.1 to save the file within the disk management.

Mobile phone / tablet with special APP software "KI routing" to a variety of operations, detailed steps please see the manual "mobile

NAS Make sure that both the computer and the box are connected to the network of the parent router and make sure that the phone is connected to the network of the box.1.Open the APP "KI routing" (download mobile phone APP please see this manual "mobile APP function").2.Into the interface can be seen after the IP box, the IP router assigned to the higher IP box.

3. open the computer "My Computer" in the address bar, enter the mobile client to see the IP, enter the file can be stored on the disk management

Input \\+ IP which is separated by superior router.

5. Mobile APP 1. Download APPIn order to prevent users from being affected by the cumbersome application modules during use, the KIDISK function is more simplified; the operation is simpler and the operation is omitted.Trivial operation, easy to understand. The installation package is only 19.7MB, and the memory footprint is smaller.Friendly reminder: Please use QQ to scan and download the corresponding APP. KIMAX DISK is an APP that directly develops KIMAX intelligent hard disk box based on KIMAX intelligent routing.Connect to the WIFI signal sent by your home router for LAN management, shared file viewing and management. Bring more convenient use to customersExperience. All major app stores can be downloaded and installed. Support for Android (Android) and iOS (Apple) systems. In the app store in the search barEnter KI DISK (both upper and lower case), click on the software icon in the figure below to download and install it; you can also scan the QR code below to download it.

7. FAQ

USB cable PC can’t read disk New hard disk need to initialize the disk for first use, otherwise can’t read it, while only can view in the disk manager . Detailed steps can search on internet “ disk initialize”. Wireless can’t identify the disk. If can’t read the hard disk via WiFi network please use USB cable connect your computer and to check disk attribute and whether have initialized or not, disk attribute if is NTFS or FAT32. If disk format is no problem as usual there are to much disk fragmentation ( For example: it’s old hard disk took from previous PC, Several partition disk partition as long as there is a difference in quality will affect the entire disk mount failed), will need to repartition the hard disk or to reformat. Also wired and wireless USB memory storage can not be used simultaneously (USB cable links all disk data will give priority to wireless USB data cable will not get data to disk) Wireless relay (if the wireless relay unsuccessful certainly following situations which condition is not met, please check carefully)First, the need to ensure a higher level of intelligent routing no speed limit, other restrictions client IP binding, MAC binding, etc. Internet gets set permissions. Also superior routing WIFI password needs eight more. Superior routing SSID can not contain spaces, SSID can not have Chinese characters and contains special symbols. If the above is no problem, please check the superior routing WIFI password is correct. If no problem, configure the relay is complete, restart the KI power equipment, see if you can boot automatically connect successfully.TP-LINK router individual needs to the higher bandwidth routing wireless settings and channel set to a fixed, default router will cause the automatic individual wireless relay failure.360 free WIFI, business class advertising WIFI, mobile phones and other hot spots supported by unknown.Wireless and wired Internet connection can not relay mode simultaneously. After the success of the wireless relay If using wired devices connect to the Internet to KI, KI need first route of the device management page - radio relay settings page - Click relay

6. DISK software features:

DISK software features: After the LAN APP is downloaded, connect to the router of our KIMAX storage device network cable to open the APP and click on the login.You can access the disk, manage the files on the disk, open the ki disk, and enter the login interface. This interface is divided into the guest login interface and administrator.Login interface, the administrator login default username is admin, the password is kimax; this password can be modified; the guest login username is guest, passwordIs the guest; this password cannot be modified, as shown in the figure:

3

5

4