tutorial « soraya » © par puca® · 1) pick up 1 r15, 1 samos x 4 2) close by a knot and exit...
TRANSCRIPT
TUTORIAL « Soraya » © par PUCA®
Made by Puca
2018 © Puca
www.perlepuca.canalblog.com PUCA© All rights reserved
1) Pick up 1 R15, 1 Samos x 4
2) Close by a knot and
exit through R15
3) Pick up 2 R15 in the
top hole of Samos
4) Pick up 2 R15, exit
through the R15
5) Repeat steps 3 and 4
between each Samos,
exit through the Samos
6) Pick up 2R15, 1 Minos,
2 R15, exit through the
next Samos
Material : For a bangle of 18 cm
• 10 grs Samos® par Puca®
• 5 grs de Minos® par Puca®
• 5 grs Delicas 0/11 (DB 0/11)
• 7 square spacer 20mm
• Seed bead 15 (R15)
• 1 clasp 3 rank of your choice
• Fireline 0.12
7) Repeat step 6 between
each Samos😊
Pick up 5 R15 around the
Minos, exit through the
central R15
8) Place your square
spacer
9) Pick up 1 R15 and pass
under the square
10) Pass through the last
R15 and the central R 15
11) Pick up 1 R15, pass
under the square and
pass through the last R15
12) Exit through the next
central R15
13) Repeat step 9 to 12 for the other corners
14) We’re going to make
some Brick Stitch all
around the square, pick
up 2 DB
15) Pass under the
square, exit through 1 DB
and pass through the
other DB
16) Pick up 1 Db , pass
under the square
17) Exit through the DB
18) Repeat steps 16 and
17, to finish all the square
19) Make a second
element 😊, exit through
the 3rd DB
20) Pick up 1 Minos, exit
in the DB, pass through
the 4th DB. Make this
twice to make your work
strong.
Pick up a 2nd Minos in
the same way😊
21) Make in total 7
elements😊
Pick up one clasp in the
DB
22) For the earrings, pick
up 5 R15 in a corner, pass
through all the beads
twice. You can place your
earing😊
23) Pick up a ring at the
opposite corner and pick
up a teardrop😊
24) It’s your turn, you can
make earings, bangle or a
pendant 😊
Happy beading!
Thank you for respecting my work ©