turcon stepseal k merkel omegat oms-mr - od rod seal
TRANSCRIPT
Rod Step seal - GSJ
3. Method of marking order number
If you need FKM O ring,please make a special instrument.Eg:Standard rod step seal Ø100 , should be mark GSJ1000.
Groove WidthInstallation Demension
Shaft diameter Groove OD Fillet Radial Clearance O Ring section
Standard Spec Light duty Heavy duty
Seal ring: filled PTFE2.Standard Material
O Ring:NBR or FKM
Preesure Range Speed MediumGeneral hydraulic oil,antiflaming oil,
water and others
For reciprocated hydraulic system. Possessing excellent performance in high, medium and low pressureand in high load, high frequency conditions. Especially suitable for long stroke.
In line with standards of GB/T 15242.1-94 and GB/T 15242.3-94. Design and apply please referring toParker’s OD, Merkel’s OMS-MR, Trelleborg’s RS1 and AS’s XB series standards.
1. Application Range & Charateritics
Available Dia. RangeWorking Condition
Temp.Range
Edition July 2009
Rod Step seal - GSJBottom Dia.Shaft Dia. Width Order Number O Ring
Size Order Number O RingSize
Width
Edition July 2009
Bottom Dia.Shaft Dia.