glyd ring turcon glyd ring-merkel omegat omk-mr-oe piston seal
TRANSCRIPT
GSF - Glyd ring for Piston
Bbottom dia.
3. Method of marking order numberEg:standard piston glyd ring Ø100 , should be mark GSF1000.
Seal ring: filled PTFE2.Standard Material
O Ring:NBR or FKM
Installation DemensionCylinder bore Groove width Fillet Radial Clearance S Max O Ring section
Standard Spec Light duty Heavy duty
Preesure Range Speed Medium
General hydraulic oil,antiflaming oil,water and others
For reciprocated hydraulic system. Possessing excellent performance in high and low pressure andhigh frequency conditions. Suitable for long and short stroke.Applied to bigger rod diameter influids and under high pressure.Design and apply please referring to Trelleborg’s PG4, Merkel’s OMK-MR, Parker’s OE and AS’s YB series standards.
Edition July 2009
Available Dia. RangeWorking Condition
Temp.Range
1. Application Range & Charateritics
GSF - Glyd ring for PistonBottom Dia. Bore Dia. WidthWidth Order Number O Ring
Size Order Number O RingSize
Bottom Dia. Bore Dia.
Edition July 2009