truxor 09 eng2.pdf
TRANSCRIPT
-
8/18/2019 truxor 09 ENG2.pdf
1/16
®
-
8/18/2019 truxor 09 ENG2.pdf
2/16
Truxor with their unique properties as multi-functional machines has ad-
vanced throughout the world on both land and water since the first ma-
chine was manufactured in 1996. The machine is the first of its kind on the
market. Its amphibian properties make it superior when it comes to work
in and around the borders between land and water. With the correct driv-
ing method, the minimal ground pressure of the machine makes it possi-
ble to advance without undue damage to the land. Truxor is therefore suit-
able for use on golf courses, private lots, nature preserves and sensitive
land sites where other machines have difficulty moving.
Truxor is easy to drive, rotates completely around its own axle in water and
has great precision when operating around e.g. docks. The broad
assortment of tools gives the machines great flexibility in different kinds of
work. The quick connection system allows for easy exchange of most toolsand the machines are changed from reed cutters to collectors in the wink
of an eye.
Our machines are delivered with standard hydraulic oil, ISO WG 46.
The machines can also be delivered with environment-friendly oil.
We are pleased to offer two models which are largely similar to each
other. There operating properties differ in the different engines, hydraulic
systems and the optional tools.
Truxor DM 4700 B is our predecessor which has been available on the
market since 1996 and has been continuously up-dated and improved to
become the machine it is today. We recommend this machine forprofessionals and entrepreneurs who want a dependable and flexible work-
ing machine; primarily for reed cutting and gathering of water plants.
Truxor DM 5000 is our latest model with a stronger engine and a new
hydraulic system allowing use of all tools with the machine as a power
source. In addition to the cutting tools and rakes, we can also offer a new
and broader assortment focusing on oil decontamination and dredging for
this machine.
Fast exchange of equipment using a
quick-connection attachment .
®
-
8/18/2019 truxor 09 ENG2.pdf
3/16
TRUXOR DM 5000 has been developed on anumber of points:
•Hydraulic operation of all equipment
•Improved ergonomics
•New improved instrument panel
•Hydraulic pressure gauge (an advantage when e.g. dredging)
•Load-sensitive hydraulic system allowing for control of the output of
power
•A 34 hp Daihatsu engine with improved placement for easy service
•A filter system for ventilation of the radiator
•New design
•More optional tools
•Standard equipped with work lighting
•Many hydraulic outlets for operation of tools. Electrically-heated
driver's seat.
•Adjustable flow for all functions of the hydraulic system
A new machine – new possibilities-a result of 15 years in the branch
Truxor DM 5 is the latest addition to our
product assortment. The new Truxor model has been
developed and adapted to offer our customers the
latest technology in easy-to-work with and well de-
signed machines. Great importance has been placed
on a very good, user-friendly hydraulic system. The
power is regulated where it is required and can be con-
trolled between the power outlets and operation of the
machine. The hydraulic system has a high output andsupports the operation of demanding pumps for dredg-
ing or oil decontamination.
The driver’s cab has ergonomically designed joysticks
for the control of operations and tools. Truxor DM
5000 is a professional's machine for those who want a
complete multi-machine for dredging, reed cutting,
excavating, oil decontamination, cultivating, etc.
®
Technical Data: Truxor DM 5000
Engine: Daihatsu 35 hp diesel, Environment ClassEuro 2
Electric system: 12 Volt, generator 40 Ah, battery 45
Ah
Cooling system: Combi-cooler for engines and
hydraulic systems.
Left joystick: For driving the machine.
Hydraulic outlet 1 – working pressure 140 bar,
adjustable flow 0 - 25 L/min. Hydraulic outlet 2 -
working pressure 130 bar, flow 16 L/min.
Right joystick: lifting, tilting, weight division. Hydrau-
lic outlet 3 – working pressure 150 bar. Adjustable
flow 0 – 50 L/min.
Driver’s cab: Folding cab, ergonomic, adjustable
driver’s seat with electrically heated seat, adjustable
control lever, instrument panel with engine speed,
engine temperature control lights, hydraulic oil
temperature, hydraulic pressure and fuel gauge.
Driving speed: 0 – 100 m/min.
Front lifts: Lifting power 250 kg, DM attachment for
fast exchange of tools.
Material: Pontoons made of salt water-durable
aluminium. Heat galvanized steel design.
Dimension: Length 4,7 m. Width: 2.06 m Height: 2.1
m.
Weight: 1,380 kg
Equipment: Work lighting, service tool
Truxor DM 5000 is delivered CE-marked.
Art no. 94-5000
-
8/18/2019 truxor 09 ENG2.pdf
4/16
Truxor DM 4700 B is a popular, well-knownface on the market. The first machines were
sold in 1996 and have been exported during the
years to customers all over the world.
When the machine was introduced it was unique
and a new technology within the branch. It was
big news that one and the same machine could
perform both reed cutting and gathering,
dredging and digging. Today, the concept is just
as up-to-date and the machine stands strong in
its class.
Truxor DM 4700 B is a flexible work machinefor professional use with two joysticks; the left
regulates operation of the machine and the
right steers the lifting arm and operation of the
tools. Its amphibian properties allow the
machine to move easily between water and
land. In the water, the paddle tracks give the
machine good precision when driving in narrow
areas; the machine turns on its own axle. A
Truxor brakes in distance of less than a half
metre from full speed.
A quick-connection in the lifting arm allows foreasier exchange between most tools; easily
managed by one person.
Truxor's flexible construction allows for easy
loading and unloading on the trailer which
means enormous moveability with low starting
costs when beginning the work.
Compared with Truxor DM 5000, this model
has a more simple hydraulic system making it
most suitable for reed cutting, gathering and
maintenance of marshlands.For larger power requirements, we recommend
Truxor DM 5000.
®
Motor: Lombardini Focs
1003 27 hp diesel
engine environment
class Euro 2.
Electric system:
Generator 45 ampere,
battery 45 ah. RRadiator system:
Water-cooled with dou-
ble-cooler for engine
and hydraulic system.
Left Joystick: For driving
the machine, the hy-
draulic outlet with vari-
able flow of 5-25L/min
hydrostatic operation.
Right Joystick: lifts, tilts,
weight distribution.
Driver s seat: Folding cab,ergonomic, electrically
heated driver's seat,
adjustable
steering-regulator with
temperature meter, con-
trol lights, hourcounter.
Driving speed:
0-80 m/min.
Front lift: Lifting power
250 kg, DM attachment
for fast exchange of tools.
Material: Pontoons made
of saltwater-durablealuminium.
The steel construction is
heat galvanized.
Dimension: Length 4.7 m
Width: 2.06 m.
Height: 2.1 m.
Weight: 1350 kg
Equipment: Work
lighting -, service tools
TruxorDM4700B is
delivered CE-marked.
Art no. 94-4700B2S
Technical Data:Truxor DM 4700 B
-
8/18/2019 truxor 09 ENG2.pdf
5/16
-
8/18/2019 truxor 09 ENG2.pdf
6/16
Doro Cutter 3090/3091The Doro Cutter 3090 is recommended for nor-
mal reed cutting and is usually the obvious
choice in most waters. The cutter is operated
hydraulically and is easily connected to Truxor’sequipment bracket. Cutting depth is 1 m. The
knives are exchangeable and the working breadth
may be varied from 2.2 to 4 m. The cutter
requires water for lubrication during work and is
therefore not suitable for use on land.
A stone-triggered system protects it from
breaking the knives against solid objects.The Doro Cutter 3091 is the same model of
cutter, but has an extended cutting depth of 1.4
Both models are delivered as standard with a
knife work width of 4 metres.
Doro Cutter ESM 2100
The Doro Cutter ESM 2100 is a front-attached
cutter with Busati model double-action knives
which means that the cutter does not need
water as a lubricant when working. The knives
do not require water for lubrication and are
suitable for use in shallow water and in
marshlands. The Doro Cutter ESM 2100 hasgood capacity and can also be used for thick
reeds. Work width 2.1 m and cutting depth
0.5m.
Technical Data:
Doro Cutter 3090/3091
Work width 4 m
Weight 61 kg
Cutting depth 1 m
Art no. 95-3090T
DORO CUTTER 3091Weight 67 kg
Work width 4 m
Cutting depth 1.4 m
Art no. 95-3091T
Technical Data: Doro Cutter ESM 2100
Work width 2.1m
Weight 68 kg
Cutting depth 0.5 mArt no. 90-ESM2100
Cutting unit
Accessories: Knife kits
2 (off) Work width 2.2 m
Art no. 95-70022
2 (off) Work width 3 m
Art no. 95-70030
2 (off) Work width 4 mArt no. 95-70040
-
8/18/2019 truxor 09 ENG2.pdf
7/16
Doro Cutter ESM 1700
This cutter is side-mounted on Truxor for
cutting along riversides and
channels so that the angle of the cutting unit
can be adjusted. The knives are a Busati
model which means that the cutter
does not need water for lubrication when
working. Doro Cutter ESM 1700 is equipped
with an automatic stone-triggered solution
which protects the cutter when motion is
stopped due to solid objects. The cutter has awork width of 1.7 m and a cutting depth of
0.5 m. It has good capacity and the Doro
Cutter ESM 1700 cuts thick reeds and plant
growth without problems.
Doro Cutter ESM 2200
Doro Cutter ESM 2200 cuts and gathers at
the same time which is a good property for
work in small boat harbours and small
streams where the water is constantly inmotion and the gathering work is
facilitates the work considerably. When
using the cutting function only, the
collection net for the cutting bucket can be
disassembled.
Doro Cutter ESM 2200 has a work width
of 2.1 m and a cutting depth of
approximately 0.8 m in water. The knives
are a Busati double-action model which
means that the cutter does not require
water for lubrication while working.
Technical Data: Doro Cutter ESM 2200
Work width approx. 2.1 m
Weight 109 kg
Width 2.25 m
Cutting depth 0.8 m
Art no. 90-ESM2200
Cutting unit
Technical Data: Doro Cutter ESM 1700
Work width 1.7 m
Weight 75 kg
Art no. 90-ESM1700
-
8/18/2019 truxor 09 ENG2.pdf
8/16
Reed rake, standardwith collapsible side sections; for gathering
and transporting plants after reed cutting.
The rake can be complemented with strainer
plates for gathering of refuse, algae andabsorbers (oil decontamination).
Rake, high tipThis rake has a high tipping height which
facilitates loading onto e.g. trailers or barges.
The rake is made of perforated steel plating
and can gather smaller particles such as
litter, algae and absorbers (oil
decontamination).
Work width 2.13 m
Weight 68 kgMax. lift height in water 1.3 m
Max. lift height on land 1.7 m
Art no. 94-47700
Collection - just as important as cutting
Cut water plants left in the water act as a
fertiliser. We therefore recommend thatcut plants always be collected and
removed. By gathering water plants and
picking them up, you also help to remove
part of the "over-fertilization" from the
lake. For those using their reed cutter in
different type of water, we usually
recommend cleaning the machine between
moves in order to prevent spreading
undesired water plants to new water
systems.
Strainer plates, accessory to standard rake.
Springing rakeWhen the waterside is uneven, the material
can be removed from the water using the
springing rake and then collected using the
standard rake.
Work width 2.5 m
Weight 30 kg
Art no. 94-47600
Rakes
Work width: 2 or 3.5 m.
Weight: 60 kg
Art no. 94-22500
Work width:
2 or 3.5 m.
Weight:
60 kg
Art no.
94-22500
-
8/18/2019 truxor 09 ENG2.pdf
9/16
Gripping bucket & Grip
Technical Data: Gripping bucket and Grip
Work depth of telescopic extension 1.7 m.Work depth of mechanical arm approx. 0.9 m.Weight of gripping bucket 76 kg
Weight of grip 40 kg
Weight of telescope 33 kg
Weight of mechanical bracket 9 kg
Art no. gripping bucket 94-58100
Art no. grip 94-59500
Art no. telescope 94-58400
Art no. mechanical bracket 94-60600
The gripping bucket and grip are used to lift plants and sediment from lake bottoms and beaches. The tool
can be combined with a telescopic arm or a mechanical bracket. With the tool attached, the telescope
has a working depth or 1.7 m.
If the work area is primarily beach edges and surface work, a mechanical bracket for the grip and grippingbucket should be chosen. The work depth will then be approx. 0.9 m. The mechanical bracket has a lowerweight which gives it greater lifting power compared with the telescopic arm.
Lifting rakeIts strong construction makes the rake an excellent
tool option for e.g. cleaning beaches and lifting of
somewhat heavier objects. The strong forks allow
for lifting e.g. stones, trees and plants with roots
which can lie along the beachside and on the bot-
tom of the lake.
Work width: 1.2 m
Weight: 36 kgArt no. 94-68000
-
8/18/2019 truxor 09 ENG2.pdf
10/16
The Doro Pump is the latest addition of dredging pumps to
our assortment and is combined with the Truxor DM 5000. The
pump is run by a hydraulic engine; it has a capacity of 10 - 40
m³ /h. The pump is mounted on a telescopic arm (sold
separately). A rotating wheel with horizontal cutters and vertical
teeth aerates the sediment and cuts off roots and soft materials
to facilitate feeding of material into the pump. The rotating wheel
makes the pump easier to maneuveur than its predecessor
which had a feeding screw at the pump inlet.The feeding is important to providing an even flow of sediment to
the pump; also facilitated by the knives positioned at the inlet of
the pump.
Technical data: The Doro Pump
Capacity 10-40 m³ /hour depending on material,
lifting height and the length of the tubing.
Weight: 87 kg.
Dredging depth: 1.7 m. With extension 2.4 m
Diameter drilling wheel: 0.8 meter
Equipment carrier: Only Truxor DM 5000
The Doro Pump is delivered with a standard kit.
Doro Pump Art no. 78-2501
Telescopic arm Art no. 94-58400
Accessories:
Flat tubing 100 mm
(Delivered in lengths
of 50 m) Art no. 78-102
Splice sleeve 100 mm Art no. 78-18800
Tube clips 100 mm Art no. 01-110D20
Standard kit for Doro Pump :
Hydraulic drill wheel, 3 m spiral tubing, 25 mflat tubing Ø 100 mm with bracket for transport
tubing, 5 floating tubes, 1 end piece, 1
quick-connection, 1 suction funnel, 1 joint
coupling with frame bracket, 1 splice coupling
Ø 100 mm,1 off 0.7 m telescope extension.
Dredge pumps
-
8/18/2019 truxor 09 ENG2.pdf
11/16
Engine: Briggs & Stratton 23 hp, electric start,
air-cooled. Centrifugal coupling which protects the
pump from overloading.
Capacity: 10-40 m³ /hour depending on material,
lifting height and the length of the tubing.
Dredging depth: 1600 mm
Length: 1950 mm Weight: 166 kg
Dredge pump 2500 is delivered CE-marked
Dredge pump 2500 is delivered with a standard kit
Art no. 78-2500
Accessories:
Flat tubing 100 mm
(Delivered lengths of 50 m) Art no. 78-102
Joint sleeve 100 mm Art no. 78-18800Tube clamps 110 mm Art no. 01-110D20
Dredge pump 2500For pumping sediment. The feed screw aerates
the bottom so that the pump receives an evenflow. The pump can also be equipped with a
suction funnel which is recommended when the
sediment it light and soft. A cutting device at the
opening of the suction pump cuts roots and
other soft objects. The pump is controlled from a
start panel mounted by the driver's seat.
Dredge pumps
Standard kit for Dredge Pump 25
Hydraulic feed screw, 3 m spiral tubing, 25 m flat
tubingØ 100 mm with attachment for float
tubes, 5 off float tubes, 1 off end piece, 1 quick-
connection, 1 suction funnel, 1 joint couplingØ
100 mm and 1 off 10 Litre petrol tank.
Technical data: Sala Roll Pump
Weight: 90 kg
Capacity: 12 m³ /h at 6 bar
Working pressure 6 bar
Max. pressure: 9 bar
Technical vacuum: -0.95 bar Equipment holder: Truxor DM 5000
Art no.: 79-3000
Accessories:
Kit for dredging Art no. 79-3001
Telescope Art no. 94-58400
Kit for dredging :
1 dredging pipe (mounted on the telescope), 3.3 m
suction tube Ø 65 mm, 2 quick connection Ø 65mm, 1 m pressure tube Ø 50 mm, 1 quick
connection Ø 50 mm, 1 connection for flat tubing Ø
50 mm with a frame bracket.
Art Nr. 79-3001
Sala Roll PumpCan pump light sediment with a reduced
amount of water. The pump works with a strong
vacuum and pressure. The high pressure
transports the sediment long stretches. The
dredging can be carried out without the water
becoming murky. The dredging pipe is mounted
on the telescope which is pressed down into
the sediment. Light and soft sediment is
sucked directly from the bottom.
Technical data: Dredge Pump 2500
-
8/18/2019 truxor 09 ENG2.pdf
12/16
The excavator
can
be mounted on both our Truxormodels. The combination becomes a floating excavator which
presents unique possibilities. The excavator is suitable for
clearing inlets and outlets of lakes, excavation of channels,
ditch digging, digging around docks, cable-laying, etc.
The excavator is controlled from the driver's seat with a
two-lever system placed on a central bracket which can easily
be adjusted according to the driver's wishes. Truxor with the
excavator allows for work to be performed in otherwise
inaccessible places.
Technical data:
Excavator
Digging radius 3.1 m
Digging depth 2.3 m
Supporting legs max. depth 1.9 m
Weight 330 kg
Valve package with a two-lever system for swings, lifts,
bucket and poles.
The excavator is delivered with a 23-litre bucket and
supporting legs (studs).
Complete for mounting on a Truxor.
Art no. 77-1800
Accessories:
49-litre bucket, work width 0.6 m Art no. 77-11900
Root knife: work depth 0.6 m Art no. 77-13400
Excavation rake: work width 0.9m Art no. 77-12000
Excavator
-
8/18/2019 truxor 09 ENG2.pdf
13/16
The Doro Miller The Doro Miller with rotary knife
The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms.The miller is available in different work widths; they are exchangeable and can be dismounted
from the operating unit. The operating unit is mounted on the lifting arm.
When water lily roots and other roots are to be removed, a rotary knife is attached using an exten-
sion on the lifting arm which gives a work depth of 1.6 m.
Cultivator
Technical Data: Doro Miller Operating unit
Weight 36 kg, Revolutions 0 - 300 r/min
Torque, max 400 Nm
Length: 0.9 m
Equipment carrier: Only Truxor DM 5000
Operating unit Art no. 72-10000
Millers for the Doro Miller
Miller 0.9 m, Weight 33 kg.
Art no. 72-10200
Miller 0.6 m, Weight 23 kg.
Art no 72-10300
Miller 0.4 m, Weight 16 kg.
Art no. 72-10400
Rotary knife for the Doro Miller
Work width 0.8 m
Weight: 14 kg
Art no. 72-10500
Extension for the rotary knife, 0.5 m
Weight: 16 kg
Art no. 72-10100
-
8/18/2019 truxor 09 ENG2.pdf
14/16
For the Truxor DM 5000 we can offer a new product assortment for oil decontamination.
Doroskimmer 400 can be combined with two types of pumps which take care of both heavy and
thin oil.
Sala Roll Pump can suck heavy sediment and oil without using a large amount of water. It is a pump
that can also be used separately for dredging, or ”vacuuming” oil residues where the Skimmer cannot
reach.
Foilex is a high-capacity pump which gives it advantages when large spills must be decontaminated.
Oil decontamination
Sala Roll PumpThe Sala Pump is a suitable pump for
decontamination operations for thick-flowing or
polluted substances in hard-to-reach places. A very
strong vacuum gives a high suction capacity. Thehigh discharge pressure transports the substances
long stretches. The Sala Roll Pump is used sepa-
rately with a suction piece or in combination with
the Doroskimmer 400.
Capacity 12 m3/h at 6 bar
Weight 90 kg
Working pressure 6 bar
Max. pressure 9 bar
Technical vacuum -0.95 bar
Equipment carrier only Truxor DM 5000
Art no. 79-3000
Doroskimmer 400A combi-skimmer used for oil decontamination of
heavy or thin oils and algae. The Skimmer is
delivered with a brush roller of mixed brush
thicknesses which is suitable for decontamination of
most type of oils. Combine with Sala or Foilex
pumps.
Capacity 0.20 m3/h
Weight 48 kg
Equipment holder Only Truxor DM 5000
Kit for decontamination includes: Suction pipe 3.3 m, suction tube 65 mm, 4 quick
connections Ø 65 mm, 1 m pressure tubing 65
mm. 1 frame bracket. Art no. 79-3002
-
8/18/2019 truxor 09 ENG2.pdf
15/16
Trailer LMT 2500 is a specially adapted
trailer for transporting a Truxor. The trailer
has guide rails fixed to its bed and a tip
function which, together with ramps allow
for easy loading and unloading of the
machine. The trailer has a specially
designed chassis of highly durable steel.
The specially designed I-girders providestrength and low weight. Dirt is easily
removed and maintenance is minimal
thanks to a well-thought-out design.
Clamps and ramps are available as acces-
sories.
Technical Data: Trailer LMT 2500 Bed dimensions 500 x 220 cm
Total length 620 cm
Bed height 70 cm
Service weight 630 kg
Total weight 2500 kg
Max. load 1870 kg
Art no. 75-LMT2500
Accessories:
Kit with ramps and clamps
Art no. 75-17100
Oil decontamination
Trailer LMT 2500
Oil decontamination has different prerequisites for
dif-ferent environments. During the final phase of work,
there are usually smaller areas with pools of oil where
it can be more practical to use a mobile tank.
The Doro Tank is mounted between the pontoons and
has couplings for simple connection to pumps as well
as a connection for emptying the tank. The Doro Tank is
used in combination with a Doroskimmer 400.
Technical Data: Doro Tank Volume 200 L
Weight 14 kg
Equip. carrier Truxor DM 5000
Art no. 79-6000
-
8/18/2019 truxor 09 ENG2.pdf
16/16
MANUFACTURING/SALES:
Dorotea Mekaniska ABÖstra Polarvägen 10917 32 Dorotea0942-258 80
We are a company specialising in machines for lake cleaning, marsh-
land and water care. We have delivered and manufactured, developed
products and initiated innovated ideas for 16 years. Today, we have
Sweden's and perhaps even the world's widest assortment of machines
for caring for lakes. We supply everything from the small, simple reed
cutters to the professional machines such as dredgers, excavators, cut-
ters and collectors. Good quality and performance have always been our
motto and we have, through time, gathered experience and a know-
ledge base which we willingly share with our customers. The factory in
Dorotea has manufacturing, a spare part stock as well as sales. Wehave customers and retailers throughout the world. And when the world
is our market, Dorotea is just as central as any other place!
Spare parts for our products are available at Dorotea
Mekaniska AB and at our partner’s Rajo, in Belgium,
About reed cuttingOur lakes and waterways are overgrown due to overfertilization and much discussed climate
changes. The lakes are acidified preventing the flow of water. By cutting and clearing inlets
and outlets, the lakes can continue to prosper and in many places cutting is performed to im-
prove the flow of water and prevent flooding.
Regular reed cutting allows for increased use of lakes and waterways in the form of available,
navigable waterways, access to fishing, more beautiful views and well-kept bathing sites.
Dorotea Mekaniska AB
At our web site you will always find the latest news!
Image galleries, films, brochures, etc.
North/ South America Sales & Service:
562 Alpha Drive, Pittsburgh PA 15238Tel: 412 963-9200 / Fax: 412 963-9214Email: info@megator com