®

Truxor with their unique properties as multi-functional machines has ad-vanced throughout the world on both land and water since the first ma-chine was manufactured in 1996. The machine is the first of its kind on the market. Its amphibian properties make it superior when it comes to work in and around the borders between land and water. With the correct driv-ing method, the minimal ground pressure of the machine makes it possi-ble to advance without undue damage to the land. Truxor is therefore suit-able for use on golf courses, private lots, nature preserves and sensitive land sites where other machines have difficulty moving.

Truxor is easy to drive, rotates completely around its own axle in water and has great precision when operating around e.g. docks. The broad assortment of tools gives the machines great flexibility in different kinds of work. The quick connection system allows for easy exchange of most tools and the machines are changed from reed cutters to collectors in the wink of an eye.

Our machines are delivered with standard hydraulic oil, ISO WG 46. The machines can also be delivered with environment-friendly oil. We are pleased to offer two models which are largely similar to each other. There operating properties differ in the different engines, hydraulic systems and the optional tools.

Truxor DM 4700 B is our predecessor which has been available on the market since 1996 and has been continuously up-dated and improved to become the machine it is today. We recommend this machine for professionals and entrepreneurs who want a dependable and flexible work-ing machine; primarily for reed cutting and gathering of water plants.

Truxor DM 5000 is our latest model with a stronger engine and a new hydraulic system allowing use of all tools with the machine as a power source. In addition to the cutting tools and rakes, we can also offer a new and broader assortment focusing on oil decontamination and dredging for this machine.

Fast exchange of equipment using a quick-connection attachment .

®

TRUXOR DM 5000 has been developed on a number of points:

•Hydraulic operation of all equipment •Improved ergonomics •New improved instrument panel •Hydraulic pressure gauge (an advantage when e.g. dredging) •Load-sensitive hydraulic system allowing for control of the output of power •A 34 hp Daihatsu engine with improved placement for easy service •A filter system for ventilation of the radiator •New design

•More optional tools

•Standard equipped with work lighting •Many hydraulic outlets for operation of tools. Electrically-heated driver's seat.

•Adjustable flow for all functions of the hydraulic system

A new machine – new possibilities -a result of 15 years in the branch

Truxor DM 5000 is the latest addition to our product assortment. The new Truxor model has been developed and adapted to offer our customers the latest technology in easy-to-work with and well de-signed machines. Great importance has been placed on a very good, user-friendly hydraulic system. The power is regulated where it is required and can be con-trolled between the power outlets and operation of the machine. The hydraulic system has a high output and supports the operation of demanding pumps for dredg-ing or oil decontamination. The driver’s cab has ergonomically designed joysticks for the control of operations and tools. Truxor DM 5000 is a professional's machine for those who want a complete multi-machine for dredging, reed cutting, excavating, oil decontamination, cultivating, etc.

®

Technical Data: Truxor DM 5000

Engine: Daihatsu 35 hp diesel, Environment Class Euro 2 Electric system: 12 Volt, generator 40 Ah, battery 45 Ah Cooling system: Combi-cooler for engines and hydraulic systems. Left joystick: For driving the machine. Hydraulic outlet 1 – working pressure 140 bar, adjustable flow 0 - 25 L/min. Hydraulic outlet 2 - working pressure 130 bar, flow 16 L/min. Right joystick: lifting, tilting, weight division. Hydrau-lic outlet 3 – working pressure 150 bar. Adjustable flow 0 – 50 L/min. Driver’s cab: Folding cab, ergonomic, adjustable driver’s seat with electrically heated seat, adjustable control lever, instrument panel with engine speed, engine temperature control lights, hydraulic oil temperature, hydraulic pressure and fuel gauge. Driving speed: 0 – 100 m/min. Front lifts: Lifting power 250 kg, DM attachment for fast exchange of tools. Material: Pontoons made of salt water-durable aluminium. Heat galvanized steel design. Dimension: Length 4,7 m. Width: 2.06 m Height: 2.1 m. Weight: 1,380 kg Equipment: Work lighting, service tool Truxor DM 5000 is delivered CE-marked. Art no. 94-5000

Truxor DM 4700 B is a popular, well-known face on the market. The first machines were sold in 1996 and have been exported during the years to customers all over the world.

When the machine was introduced it was unique and a new technology within the branch. It was big news that one and the same machine could perform both reed cutting and gathering, dredging and digging. Today, the concept is just as up-to-date and the machine stands strong in its class. Truxor DM 4700 B is a flexible work machine for professional use with two joysticks; the left regulates operation of the machine and the right steers the lifting arm and operation of the tools. Its amphibian properties allow the machine to move easily between water and land. In the water, the paddle tracks give the machine good precision when driving in narrow areas; the machine turns on its own axle. A Truxor brakes in distance of less than a half metre from full speed. A quick-connection in the lifting arm allows for easier exchange between most tools; easily managed by one person. Truxor's flexible construction allows for easy loading and unloading on the trailer which means enormous moveability with low starting costs when beginning the work. Compared with Truxor DM 5000, this model has a more simple hydraulic system making it most suitable for reed cutting, gathering and maintenance of marshlands. For larger power requirements, we recommend Truxor DM 5000.

®

Motor: Lombardini Focs 1003 27 hp diesel engine environment class Euro 2. Electric system: Generator 45 ampere, battery 45 ah. R Radiator system: Water-cooled with dou-ble-cooler for engine and hydraulic system. Left Joystick: For driving the machine, the hy-draulic outlet with vari-able flow of 5-25L/min hydrostatic operation. Right Joystick: lifts, tilts, weight distribution. Driver's seat: Folding cab, ergonomic, electrically heated driver's seat, adjustable steering-regulator with temperature meter, con-trol lights, hourcounter.

Driving speed: 0-80 m/min. Front lift: Lifting power 250 kg, DM attachment for fast exchange of tools. Material: Pontoons made of saltwater-durable aluminium. The steel construction is heat galvanized. Dimension: Length 4.7 m Width: 2.06 m. Height: 2.1 m. Weight: 1350 kg Equipment: Work lighting­, service tools TruxorDM4700B is delivered CE-marked. Art no. 94-4700B2S

Technical Data: Truxor DM 4700 B

Doro Cutter 3090/3091

The Doro Cutter 3090 is recommended for nor-mal reed cutting and is usually the obvious choice in most waters. The cutter is operated hydraulically and is easily connected to Truxor’s equipment bracket. Cutting depth is 1 m. The knives are exchangeable and the working breadth may be varied from 2.2 to 4 m. The cutter requires water for lubrication during work and is therefore not suitable for use on land. A stone-triggered system protects it from breaking the knives against solid objects. The Doro Cutter 3091 is the same model of cutter, but has an extended cutting depth of 1.4 Both models are delivered as standard with a knife work width of 4 metres.

Doro Cutter ESM 2100 The Doro Cutter ESM 2100 is a front-attached cutter with Busati model double-action knives which means that the cutter does not need water as a lubricant when working. The knives do not require water for lubrication and are suitable for use in shallow water and in marshlands. The Doro Cutter ESM 2100 has good capacity and can also be used for thick reeds. Work width 2.1 m and cutting depth 0.5m.

Technical Data: Doro Cutter 3090/3091

Work width 4 m Weight 61 kg Cutting depth 1 m Art no. 95-3090T DORO CUTTER 3091 Weight 67 kg Work width 4 m Cutting depth 1.4 m Art no. 95-3091T

Technical Data: Doro Cutter ESM 2100

Work width 2.1m Weight 68 kg Cutting depth 0.5 m Art no. 90-ESM2100

Cutting unit

Accessories: Knife kits

2 (off) Work width 2.2 m Art no. 95-70022 2 (off) Work width 3 m Art no. 95-70030 2 (off) Work width 4 m Art no. 95-70040

Doro Cutter ESM 1700

This cutter is side-mounted on Truxor for cutting along riversides and channels so that the angle of the cutting unit can be adjusted. The knives are a Busati model which means that the cutter does not need water for lubrication when working. Doro Cutter ESM 1700 is equipped with an automatic stone-triggered solution which protects the cutter when motion is stopped due to solid objects. The cutter has a work width of 1.7 m and a cutting depth of 0.5 m. It has good capacity and the Doro Cutter ESM 1700 cuts thick reeds and plant growth without problems.

Doro Cutter ESM 2200 Doro Cutter ESM 2200 cuts and gathers at the same time which is a good property for work in small boat harbours and small streams where the water is constantly in motion and the gathering work is facilitates the work considerably. When using the cutting function only, the collection net for the cutting bucket can be disassembled. Doro Cutter ESM 2200 has a work width of 2.1 m and a cutting depth of approximately 0.8 m in water. The knives are a Busati double-action model which means that the cutter does not require water for lubrication while working.

Technical Data: Doro Cutter ESM 2200 Work width approx. 2.1 m Weight 109 kg Width 2.25 m Cutting depth 0.8 m Art no. 90-ESM2200

Cutting unit

Technical Data: Doro Cutter ESM 1700

Work width 1.7 m Weight 75 kg Art no. 90-ESM1700

Reed rake, standard with collapsible side sections; for gathering and transporting plants after reed cutting. The rake can be complemented with strainer plates for gathering of refuse, algae and absorbers (oil decontamination).

Rake, high tip This rake has a high tipping height which facilitates loading onto e.g. trailers or barges. The rake is made of perforated steel plating and can gather smaller particles such as litter, algae and absorbers (oil decontamination). Work width 2.13 m Weight 68 kg Max. lift height in water 1.3 m Max. lift height on land 1.7 m Art no. 94-47700

Collection - just as important as cutting Cut water plants left in the water act as a fertiliser. We therefore recommend that cut plants always be collected and removed. By gathering water plants and picking them up, you also help to remove part of the "over-fertilization" from the lake. For those using their reed cutter in different type of water, we usually recommend cleaning the machine between moves in order to prevent spreading undesired water plants to new water systems.

Strainer plates, accessory to standard rake.

Springing rake When the waterside is uneven, the material can be removed from the water using the springing rake and then collected using the standard rake.

Work width 2.5 m Weight 30 kg Art no. 94-47600

Rakes

Work width: 2 or 3.5 m. Weight: 60 kg Art no. 94-22500

Work width: 2 or 3.5 m. Weight: 60 kg Art no. 94-22500

Gripping bucket & Grip

Technical Data: Gripping bucket and Grip

Work depth of telescopic extension 1.7 m. Work depth of mechanical arm approx. 0.9 m. Weight of gripping bucket 76 kg Weight of grip 40 kg Weight of telescope 33 kg Weight of mechanical bracket 9 kg Art no. gripping bucket 94-58100 Art no. grip 94-59500 Art no. telescope 94-58400 Art no. mechanical bracket 94-60600

The gripping bucket and grip are used to lift plants and sediment from lake bottoms and beaches. The tool can be combined with a telescopic arm or a mechanical bracket. With the tool attached, the telescope has a working depth or 1.7 m. If the work area is primarily beach edges and surface work, a mechanical bracket for the grip and gripping bucket should be chosen. The work depth will then be approx. 0.9 m. The mechanical bracket has a lower weight which gives it greater lifting power compared with the telescopic arm.

Lifting rake Its strong construction makes the rake an excellent tool option for e.g. cleaning beaches and lifting of somewhat heavier objects. The strong forks allow for lifting e.g. stones, trees and plants with roots which can lie along the beachside and on the bot-tom of the lake. Work width: 1.2 m Weight: 36 kg Art no. 94-68000

The Doro Pump is the latest addition of dredging pumps to our assortment and is combined with the Truxor DM 5000. The pump is run by a hydraulic engine; it has a capacity of 10 - 40 m³/h. The pump is mounted on a telescopic arm (sold separately). A rotating wheel with horizontal cutters and vertical teeth aerates the sediment and cuts off roots and soft materials to facilitate feeding of material into the pump. The rotating wheel makes the pump easier to maneuveur than its predecessor which had a feeding screw at the pump inlet. The feeding is important to providing an even flow of sediment to the pump; also facilitated by the knives positioned at the inlet of the pump.

Technical data: The Doro Pump

Capacity 10-40 m³/hour depending on material, lifting height and the length of the tubing. Weight: 87 kg. Dredging depth: 1.7 m. With extension 2.4 m Diameter drilling wheel: 0.8 meter Equipment carrier: Only Truxor DM 5000 The Doro Pump is delivered with a standard kit. Doro Pump Art no. 78-2501 Telescopic arm Art no. 94-58400

Accessories: Flat tubing 100 mm (Delivered in lengths of 50 m) Art no. 78-102 Splice sleeve 100 mm Art no. 78-18800 Tube clips 100 mm Art no. 01-110D20

Standard kit for Doro Pump: Hydraulic drill wheel, 3 m spiral tubing, 25 m flat tubing Ø 100 mm with bracket for transport tubing, 5 floating tubes, 1 end piece, 1 quick-connection, 1 suction funnel, 1 joint coupling with frame bracket, 1 splice coupling Ø 100 mm,1 off 0.7 m telescope extension.

Dredge pumps

Engine: Briggs & Stratton 23 hp, electric start, air-cooled. Centrifugal coupling which protects the pump from overloading. Capacity: 10-40 m³/hour depending on material, lifting height and the length of the tubing. Dredging depth: 1600 mm Length: 1950 mm Weight: 166 kg Dredge pump 2500 is delivered CE-marked Dredge pump 2500 is delivered with a standard kit Art no. 78-2500

Accessories: Flat tubing 100 mm (Delivered lengths of 50 m) Art no. 78-102

Joint sleeve 100 mm Art no. 78-18800

Tube clamps 110 mm Art no. 01-110D20

Dredge pump 2500 For pumping sediment. The feed screw aerates the bottom so that the pump receives an even flow. The pump can also be equipped with a suction funnel which is recommended when the sediment it light and soft. A cutting device at the opening of the suction pump cuts roots and other soft objects. The pump is controlled from a start panel mounted by the driver's seat.

Dredge pumps

Standard kit for Dredge Pump 2500 Hydraulic feed screw, 3 m spiral tubing, 25 m flat tubing Ø 100 mm with attachment for float tubes, 5 off float tubes, 1 off end piece, 1 quick-connection, 1 suction funnel, 1 joint coupling Ø 100 mm and 1 off 10 Litre petrol tank.

Technical data: Sala Roll Pump Weight: 90 kg Capacity: 12 m³/h at 6 bar Working pressure 6 bar Max. pressure: 9 bar Technical vacuum: -0.95 bar Equipment holder: Truxor DM 5000 Art no.: 79-3000 Accessories: Kit for dredging Art no. 79-3001 Telescope Art no. 94-58400

Kit for dredging : 1 dredging pipe (mounted on the telescope), 3.3 m suction tube Ø 65 mm, 2 quick connection Ø 65 mm, 1 m pressure tube Ø 50 mm, 1 quick connection Ø 50 mm, 1 connection for flat tubing Ø 50 mm with a frame bracket. Art Nr. 79-3001

Sala Roll Pump Can pump light sediment with a reduced amount of water. The pump works with a strong vacuum and pressure. The high pressure transports the sediment long stretches. The dredging can be carried out without the water becoming murky. The dredging pipe is mounted on the telescope which is pressed down into the sediment. Light and soft sediment is sucked directly from the bottom.

Technical data: Dredge Pump 2500

The excavator can be mounted on both our Truxor

models. The combination becomes a floating excavator which presents unique possibilities. The excavator is suitable for clearing inlets and outlets of lakes, excavation of channels, ditch digging, digging around docks, cable-laying, etc. The excavator is controlled from the driver's seat with a two-lever system placed on a central bracket which can easily be adjusted according to the driver's wishes. Truxor with the excavator allows for work to be performed in otherwise inaccessible places.

Technical data: Excavator

Digging radius 3.1 m Digging depth 2.3 m Supporting legs max. depth 1.9 m Weight 330 kg Valve package with a two-lever system for swings, lifts, bucket and poles. The excavator is delivered with a 23-litre bucket and supporting legs (studs). Complete for mounting on a Truxor. Art no. 77-1800

Accessories: 49-litre bucket, work width 0.6 m Art no. 77-11900 Root knife: work depth 0.6 m Art no. 77-13400 Excavation rake: work width 0.9m Art no. 77-12000

Excavator

The Doro Miller The Doro Miller with rotary knife The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms. The miller is available in different work widths; they are exchangeable and can be dismounted from the operating unit. The operating unit is mounted on the lifting arm. When water lily roots and other roots are to be removed, a rotary knife is attached using an exten-sion on the lifting arm which gives a work depth of 1.6 m.

Cultivator

Technical Data: Doro Miller Operating unit Weight 36 kg, Revolutions 0 - 300 r/min Torque, max 400 Nm Length: 0.9 m Equipment carrier: Only Truxor DM 5000 Operating unit Art no. 72-10000 Millers for the Doro Miller Miller 0.9 m, Weight 33 kg. Art no. 72-10200 Miller 0.6 m, Weight 23 kg. Art no 72-10300 Miller 0.4 m, Weight 16 kg. Art no. 72-10400 Rotary knife for the Doro Miller Work width 0.8 m Weight: 14 kg Art no. 72-10500 Extension for the rotary knife, 0.5 m Weight: 16 kg Art no. 72-10100

For the Truxor DM 5000 we can offer a new product assortment for oil decontamination. Doroskimmer 400 can be combined with two types of pumps which take care of both heavy and thin oil. Sala Roll Pump can suck heavy sediment and oil without using a large amount of water. It is a pump that can also be used separately for dredging, or ”vacuuming” oil residues where the Skimmer cannot reach. Foilex is a high-capacity pump which gives it advantages when large spills must be decontaminated.

Oil decontamination

Sala Roll Pump The Sala Pump is a suitable pump for decontamination operations for thick-flowing or polluted substances in hard-to-reach places. A very strong vacuum gives a high suction capacity. The high discharge pressure transports the substances long stretches. The Sala Roll Pump is used sepa-rately with a suction piece or in combination with the Doroskimmer 400. Capacity 12 m3/h at 6 bar Weight 90 kg Working pressure 6 bar Max. pressure 9 bar Technical vacuum -0.95 bar Equipment carrier only Truxor DM 5000 Art no. 79-3000

Doroskimmer 400 A combi-skimmer used for oil decontamination of heavy or thin oils and algae. The Skimmer is delivered with a brush roller of mixed brush thicknesses which is suitable for decontamination of most type of oils. Combine with Sala or Foilex pumps. Capacity 0.20 m3/h Weight 48 kg Equipment holder Only Truxor DM 5000

Kit for decontamination includes: Suction pipe 3.3 m, suction tube 65 mm, 4 quick connections Ø 65 mm, 1 m pressure tubing 65 mm. 1 frame bracket. Art no. 79-3002

Trailer LMT 2500 is a specially adapted trailer for transporting a Truxor. The trailer has guide rails fixed to its bed and a tip function which, together with ramps allow for easy loading and unloading of the machine. The trailer has a specially designed chassis of highly durable steel. The specially designed I-girders provide strength and low weight. Dirt is easily removed and maintenance is minimal thanks to a well-thought-out design. Clamps and ramps are available as acces-sories.

Technical Data: Trailer LMT 2500 Bed dimensions 500 x 220 cm Total length 620 cm Bed height 70 cm Service weight 630 kg Total weight 2500 kg Max. load 1870 kg Art no. 75-LMT2500 Accessories: Kit with ramps and clamps Art no. 75-17100

Oil decontamination

Trailer LMT 2500

Oil decontamination has different prerequisites for dif-ferent environments. During the final phase of work, there are usually smaller areas with pools of oil where it can be more practical to use a mobile tank. The Doro Tank is mounted between the pontoons and has couplings for simple connection to pumps as well as a connection for emptying the tank. The Doro Tank is used in combination with a Doroskimmer 400.

Technical Data: Doro Tank Volume 200 L Weight 14 kg Equip. carrier Truxor DM 5000 Art no. 79-6000

MANUFACTURING/SALES:

Dorotea Mekaniska AB Östra Polarvägen 10 917 32 Dorotea 0942-258 80

We are a company specialising in machines for lake cleaning, marsh-land and water care. We have delivered and manufactured, developed products and initiated innovated ideas for 16 years. Today, we have Sweden's and perhaps even the world's widest assortment of machines for caring for lakes. We supply everything from the small, simple reed cutters to the professional machines such as dredgers, excavators, cut-ters and collectors. Good quality and performance have always been our motto and we have, through time, gathered experience and a know-ledge base which we willingly share with our customers. The factory in Dorotea has manufacturing, a spare part stock as well as sales. We have customers and retailers throughout the world. And when the world is our market, Dorotea is just as central as any other place! Spare parts for our products are available at Dorotea Mekaniska AB and at our partner’s Rajo, in Belgium,

About reed cutting Our lakes and waterways are overgrown due to overfertilization and much discussed climate changes. The lakes are acidified preventing the flow of water. By cutting and clearing inlets and outlets, the lakes can continue to prosper and in many places cutting is performed to im-prove the flow of water and prevent flooding. Regular reed cutting allows for increased use of lakes and waterways in the form of available, navigable waterways, access to fishing, more beautiful views and well-kept bathing sites.

Dorotea Mekaniska AB

At our web site you will always find the latest news!

Image galleries, films, brochures, etc.

North/ South America Sales & Service:

562 Alpha Drive, Pittsburgh PA 15238 Tel: 412 963-9200 / Fax: 412 963-9214 Email: info@megator.com Website: www.megator.com