Triton Series

English User’s Manual

Triton + Triton 180

Triton GZ-XX1CA-SNS/SNBTriton 180 GZ-AX1CA-SDS/SDB GZ-AX1CA-SD1/SD2

En

glish

�

Thank you for purchasing GIGABYTE thermal product. GIGABYTE is dedicated to the integration of casing liquid/air-cooling solution technology, to provide users with the most optimal solution for heat dissipation. For further information and specifications of the “Triton” series, please visit GIGABYTE website. (http://www.gigabyte.com.tw)

The Following are not covered by the warranty:1. Using the product incorrectly or in a manner other than the designed purpose.2. Nonobservance of the proper operations provided.3. Malfunction due to interference from other devices.4. Unapproved modification of the product.5. Consequential damage to other objects due to the product’s fault.6. Malfunction arising from natural hazards E.g. earthquake, lighting, fire and floods.7. The product’s warranty label has been removed or damaged.8. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, ventilator, etc, are not detached from the casing prior to transportation of the computer system, resulting in damage to the casing or other computer-related devices.9. Any loss/damage caused by failure to follow the installation process with in the user manual.

Triton 180Triton

Failure to wear gloves during installation of computer products may cause bodily harm or damage to your devices. Incorrect connector installation may possibly burn out the motherboard and other components. Be sure to observe the instructions in the user manual.

En

glish

�

Table of Contents1. Components Introduction　　　　　　　　　　 　　　　 4

1-1 Casing’s Internal Structure 4

1-2 Front and Rear Panel Structure　　　　　　　 　　　　5

1-3 Removal of Side and Front Panels 　 6

2. Features　　　　　　 　　　　　　　　　　　　　　　　　　6

3. Specifications　　　　　　　　 　　　　　　　　　　　　　 7

4. Installation Instructions　　　　　　　　 　　　 8

4-1 Installation of Power Supply　　　　　　　　 　　　　　8

4-2 Installation of Motherboard　　　　　　　　　　 　　　8

4-3 Installation of Add-on Card　　　　　　　　　 　　 9

4-4 Installation of Front Multi-Media I/O Port　　　　　 　 10

4-5 Installation of Fan Power Cable　　　　　　　　　　 11

4-6 Installation of 5.25” Front Device Bay　　　　　　　 　 12

4-7 Installation of 3.5” Front Device Bay 　　　 12

4-8 Installation of 3.5” Internal Device Bay　　　　　 13

4-9 Foot Supports　　　　 13

4-10 Liquid Cooling System Support　　　 13

4-11 Recommended Cooling Products 14

En

glish

�

1.Components Introduction 1-1 Casing’s Internal Structure

1

�

�

�

5

6

7

8

Power Supply

1

Motherboard Tray

�

PCI Tool-Free Fastener

�

5.25” Front Device Bay

�

3.5” Front Device Bay

5

3.5” Internal Device Bay

6

En

glish

5

1-2 Front and Rear Panel Structure a) Front Panel b) Rear Panel

Accessory Box

7

Securing Runner x 6

Copper Stand Off x 9

Motherboard Securing Screw x 9

Power Supply Securing Screw x 4

Wire Clamp x 1 Magnet Ring x 1

Front Cable Kit

8

USB 2.0 Audio Set (HD & AC’97)

IEEE1394 (Multi-connectors)

3-Pin Fan Connector

Basic chassis power switch control cable kit

Triton 180 Triton

a-1) Reset SW / HDD LED / Power SW / Power LED a-2)Front multi-media I/O ports (USB x2, IEEE 1394 x1, Audio Set x1 (HD &AC’97)) b-1) Rear Fanb-2) LCS Tube Inlet/Outlet

b-1

b-�

a-1

a-�

En

glish

6

1-3 Removal of Side and Front Panels1-3.1 To remove side panels:

Remove the 4 thumb screws at the rear of the 　　　 side panels, and detach the side panels.

1-3.2 To remove front panel:Remove the left and right side panels (see step 1-3.1), release

　　　 the 4 clamps the hold the front panel onto the chassis.

2.Features -High Quality Design • High-end aluminum bezel design • Skid-proof & shock-proof foot stands

-Complete Support • Front panel multi-media I/O ports (USB x2, IEEE 1394 x1, Audio Set x1 (HD &AC’97)) • Dual 12cm silent & shock proof fan (Front x 1 and Rear x 1) • Supports liquid cooling systems

-Integration of Cooling Technology • Intel CAG 1.1 Air Duct

-Convenience of Assembly • Internal Cable Management • Tool-free installation design

1-3.1a

1-3.2a

En

glish

7

3.Specifications

Triton Triton 180

Model GZ-XX1CA-SNS/SNB GZ-AX1CA-SDS/SDBGZ-AX1CA-SD1/SD2

Case Type Middle Tower

Size (W x H x D) 200 x 440x 480 mm

Front Bezel Material Aluminum

Color Silver / Black

Side Panel Intel CAG1.1

Body Material 0.7 mm SECC

Net Weight 8.4kg

5.25” Device Bay (external) 5

3.5” Device Bay (external) 2

3.5” Device Bay (internal) 3

PCI Slot 7

Motherboard Size ATX / Micro ATX / Flex ATX

System Fan (front) 12cm silent fan x 1

System Fan (rear) 12cm silent fan x 1

Multi-Media I/O PortUSB2.0 x 2 , IEEE 1394 x 1 , Audio Set x 1 (HD & AC'97)

En

glish

8

4.Installation Instructions Please follow the reference sections in order for installation.

4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. Required Tools: Power supply securing screw x 4.

Remove side panel (see step 1-3.1 on page 6). Place the power supply unit into the case.

Secure the power supply with the 4 securing screws.

4-2 Installation of Motherboard This chassis is compatible with ATX / Micro ATX / Flex ATX motherboards. Please confirm the dimensions and fixing points of the motherboard prior to installation. Required Tools: Copper stand offs, Motherboard screws.

According to motherboard specifications, select proper screw points, screw in the copper stand offs into the corresponding points on the motherboard.

Change the motherboard I/O bracket on the rear panel (supplied by the motherboard manufacturer).

4-1.1

4-1.2

4-2.1

4-2.2

En

glish

�

Secure the motherboard with the motherboard screws (refer to your motherboard manual to check what type of motherboard you have).

4-3 Installation of Add-on Card This chassis supports tool-free installation of add-on cards, e.g. graphics cards, sound cards, and etc. Required Tools: None

Unlock the corresponding PCI tool-free fastener by pushing it downwards.

Lift the fastener upwards and remove the internally attached dust-proof PCI cover.

Insert the add-on card into the expansion slotand then lock the PCI tool-free fastener.

4-2.3

Motherboard Code name Motherboard screws Case copper

post ATX A1-A9 9 9

Micro ATX U1-U9 9 9Flex ATX F1-F6 6 6

4-3.1

4-3.2

4-3.3

En

glish

10

4-4 Installation of Front Multi-Media I/O Ports

The front panel consists of: (1) 2 x USB, 1 x IEEE 1394 and 1 x Audio Set (HD & AC’97) (2) Basic casing power switch control cable kit. Required Tools: None

(1) 2 x USB, 1 x IEEE 1394 and 1 x Audio Set (HD & AC’97)Insert the USB 2.0 connectors into the

corresponding socket on the motherboard.

Insert the IEEE 1394 connector into the corresponding socket on the motherboard.

Please refer to the instructions supplied by the motherboard manufacturer and make sure the correct type of connector is used prior to installation.

Incorrect connection of the slots can possibly cause the motherboard to malfunction or completely destroy the motherboard. Please read the installation procedure within the user manual as incorrect installations or connections causing faults will void your warranty.

4-4.1

4-4.2

Pin Definition Pin Definition1 Power 6 USB Dy+2 Power 7 GND3 USB Dx- 8 GND4 USB Dy- 95 USB Dx+ 10 USB Over current

USB 2.0 connector

Pin Definition Pin Definition1 TPA+ 6 TPB-2 TPA- 7 3 GND 8 +12V4 GND 9 +12V5 TPB+ 10 GND

IEEE 1394 connector A

Pin Definition Pin Definition1 TPA+ 6 TPB-2 TPA- 7 +12V3 GND 8 +12V4 GND 95 TPB+ 10 GND

IEEE 1394 connector B

Pin Definition Pin Definition1 +12V 9 +12V2 +12V 10 +12V3 TPA+ 11 TPA1+4 TPA- 12 TPA1-5 GND 13 GND6 GND 147 TPB+ 15 TPB1+8 TPB- 16 TPB1-

IEEE 1394 connector C

A

B C

En

glish

11

Insert the Audio connector into the corresponding socket on the motherboard.

(2) Basic casing power switch control cable kit. Follow the connectors list below for installation (see figure below)

4-5 Connection of Fan Power Cables This chassis has one 12cm silent cooling fan in the front and one in the rear. This case includes internal connectors that connects the front and rear fans making it into a single 3-pin connector. Required Tools: None

Plug the 3-pin connector into the corresponding system fan socket on the motherboard.

4-4.3

HD AUDIO Pin Definition Pin Definition1 MIC2_L 6 FSENSE12 GND 7 FAUDIO_JD3 MIC2_R 84 -ACZ_DET 9 LINE2_L5 LINE2_R 10 FSENSE2

Pin Definition Pin Definition1 MIC 6 NC2 GND 7 NC3 MIC Power 84 NC 9 Line Out(L)5 Line Out(R) 10 NC

AC'97

Connector ColorSpeaker Yellow(+) / Black(-)

Reset SW Blue(+) / White(-)Power SW Orange(+) / White(-)

Power LED+ GreenPower LED- WhiteH.D.D. LED Red(+) / White(-)

Different motherboards have different installation areas and specifications, screw holes and connectors. For detailed instructions, please refer to the motherboard user manual supplied by the motherboard manufacturer.

4-5.1

En

glish

1�

4-6 Installation of 5.25” Front Device Bay This chassis can accommodate up to 5 x 5.25” front devices. Required Tools: None

Detach the front panel (see step 1-3.2 on page 6) and remove the mesh drive rail from the front panel.

Remove the front EMI plate and attach the front panel onto the chassis.

Slide the 5.25” device into the drive bay from the front of the chassis.

Secure the 5.25” device with the internal latch. Refer to the figure for installation procedure.

4-7 Installation of 3.5” Front Device Bay This chassis can accommodate up to 2 x 3.5” front devices. Required Tools: None

Installation of 3.5” front devices is the same as 5.25” front devices, please refer to step 4-6.

4-6.1

4-6.2

4-6.3

4-6.4

4-7.1

Lock

En

glish

1�

4-8 Installation of 3.5” Internal Device Bay This chassis provides internal device bays to accommodate up to 3 hard disc drives. The internal device requires securing runners, which can be found be found in the accessory box. Required Tools: Securing runners (2 per hard disc drive)

Fit the securing runners on both sides of the HDD and slide the HDD into the internal device bay.

4-9 Foot Supports This chassis is supplied with four high-end skid- 　　 proof foot supports for ensuring the casing is firmly seated on the holding surface.

4-10 Liquid Cooling System This chassis can fully support the GIGABYTE 3D Galaxy liquid cooling system (it also supports majority of liquid cooling systems available commercially). While installing the liquid cooling system, please refer to the manual provided with the liquid cooling system.

4-8.1

Additional HDD can be installed in the 3.5” front device bay. Slide in the HDD and lock the internal latch to secure the HDD.

En

glish

1�

4-11 Recommended Cooling Products This chassis is recommended to be used with GIGABYTE cooling products.