triton - glendale · 2019. 1. 9. · triton fully automated thermal laminator triton ds - double...

2
A CLEARER VISION FOR THE PERFECT FINISH D & K Europe Limited 38-39 Crossgate Road • Park Farm • Redditch • Worcestershire • B98 7SN • UK T :+44 (0)1527 520073 • F :+44 (0)1527 524056 • E : info@dkeurope.co.uk www.dkeurope.co.uk Triton fully automated thermal laminator Triton DS - Double Sided Triton - Single Sided The B1+ Triton is available either single or double sided and also available in either 760mm or 1050mm widths. PLC controlled with touch screen operation, its features make it equally adept at running both digital and lithographic output.

Upload: others

Post on 08-Sep-2020

24 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Triton - Glendale · 2019. 1. 9. · Triton fully automated thermal laminator Triton DS - Double Sided Triton - Single Sided The B1+ Triton is available either single or double sided

A CLEARER VISION FOR THE PERFECT FINISH

D & K Europe Limited38-39 Crossgate Road • Park Farm • Redditch • Worcestershire • B98 7SN • UK T :+44 (0)1527 520073 • F :+44 (0)1527 524056 • E : [email protected]

www.dkeurope.co.uk

Tritonfully automated thermal laminator

Triton DS - Double Sided

Triton - Single Sided

The B1+ Triton is available either single or double sided and also available in either 760mm or 1050mm widths. PLC controlled with touch screen operation, its features make it equally adept at running both digital and lithographic output.

Page 2: Triton - Glendale · 2019. 1. 9. · Triton fully automated thermal laminator Triton DS - Double Sided Triton - Single Sided The B1+ Triton is available either single or double sided

A CLEARER VISION FOR THE PERFECT FINISH

D & K Europe Limited38-39 Crossgate Road • Park Farm • Redditch • Worcestershire • B98 7SN • UK T :+44 (0)1527 520073 • F :+44 (0)1527 524056 • E : [email protected]

www.dkeurope.co.uk

Tritonfully automated thermal laminator

The decurl bar is adjustable to assist in giving a flat result.

The pallet loading suction feeder offers a deep pile for longer runs and is easily adjustable for a variety of different sheet sizes.

The positioning of the pneumatically controlled perforator overcomes any potential issues caused by poor film roll profiles allowing higher speeds to be maintained.

An pneumatically controlled infeed roller presents lightweight and digital output to the laminating and nip rollers where a no sheet detector helps to prevent unwanted wraparounds.

The adjustable burster automatically separates sheets up to B1 size whilst a blower bar provides a cushion of air to support the sheet as it is delivered into the Jogger.

The PLC control panel offers ease of operation and is enhanced with a modem link for remote diagnostics.

The standard jogger may be adjusted for height and to suit various sheet sizes.

The film mandrel swings out and incorporates an air shaft to speed roll changes.

Film can be adjusted laterally on the run to minimise waste and down time.