tritec product catalogue enu

energy for a better world

PRODUCT CATALOGUE 2010

TRITEC means clean energy. The cleanest energy comes from the sun: today and in the future. “Energy for a better world” is our motto. This guiding theme includes not only the environmental aspect, but it also and simultaneously places an important social demand on the global energy supply.

For more than 20 years, TRITEC has been an international photovoltaic system supplier and centre of competence in the area of renewable energies. All components of a pho-tovoltaic system, be it intended for grid connection or for stand-alone systems (page 6 et seqq.), must be perfectly coordinated, in order to achieve optimal efficiency. As your solar specialist and partner, we will advise and support you in planning your solar systems. You will find everything regarding technical advice, product software, documenta-tion and training in the chapter “Customer Support and Services”.

In addition to the perfect coordination of the individual PV components, the quality of each individual product is essential. After all, systems generating solar energy are ex-posed to the hardest weather conditions for many years. For this reason we only use A-brands as we only work with manufacturers guaranteeing the highest quality. You can find our products and photovoltaic system components on page 12 et seqq.

TRITEC is also a system integrator and manufacturer of own brand products. During the planning and installation of small and medium-sized photovoltaic systems we work with qualified partner companies. As international system integrator we implement large photovoltaic systems and test state-of-the-art installation technologies, which will then be established in practical use. You will find some examples of our application areas in the chapter “Refer-ence Cases”. As solar component manufacturer we are active in the mounting system and measuring technology. Our own brand products include the mounting systems TRI-STAND and TRI-VENT (see chapter “Mounting Systems”) as well as PV control and measuring instruments, such as the characteristics analyser TRI-KA II, newly enhanced for the Intersolar 2010 (see chapter “Control and Measuring In-struments”).

The characteristics analyser TRI-KA II for checking the out-put of installed solar modules is available as an even more manageable and powerful model from the Intersolar 2010: The most important innovations of the TRI-KA are increased input range for current and voltage, two reference cells at the irradiation sensor, improved menu navigation with user-friendly touch screen and a new evaluation software.

Do you have any questions about our new characteristics analyser TRI-KA II? Let us advise you or attend one of our TRI-KA product training courses. Give us a call: Interna-tional Headquarters, Switzerland +41 61 699 35 55.

Our catalogue is continuously updated; please also visit our web site: www.tritec-energy.com/products

Foreword

Solar Power Plant 11.6 kWp, Jungfraujoch (Switzerland)In co-operation with TRITEC

Contents

PHOTOVOLTAICS

Introduction 6

Grid-connected Systems 8

Stand-alone Systems 10

PRODUCTS

Solar Modules 13-39

Grid-connected Inverters 41-73

Batteries 75-79

Controllers 81-95

Stand-alone Inverters 97-105

Control and Measuring Instruments 107-119

Mounting Systems 121-135

Accessories 137-161

Complete Systems 163-167

CUSTOMER SUPPORT AND SERVICES

Product Software 170

Training Courses / Product Documentations 172

COMPANY

Reference Cases 175-187

General Terms and Conditions 188

TRITEC Contacts 190

Imprint 191

Stade de Suisse 1.35 MWp, Bern (Switzerland)Designed and installed by TRITEC

Introduction to Photovoltaics

History of PhotovoltaicsPhotovoltaics are an essential part of the portfolio of re-newable energies. At the EU level, the passing of the Directive for Renewable Energies set a mandatory target: By 2020, 20 per cent of the energy demand must be sup-plied by renewable energies. Feed-in tariffs and subsidies have resulted in a boom in the construction of photovoltaic installations worldwide. Already in 2004, the threshold of 1 GWp of installed electric rated power of photovoltaic installations was exceeded, which corresponded to an increase by a factor of more than 24 during the last ten years. And the newly installed photovoltaic output con-tinues to grow every year. For the period of 2007 – 2012, an average annual growth of 48 per cent is expected. For the current year, the experts anticipate a newly installed output of 4776 MW.

Already in 1839, the French physicist Alexandre Edmond Becquerel had discovered the photoelectric effect. But it took more than 100 years, until the first technical applica-tion in satellite technology could be realised at the end of the 50s. Driven by the energy crises of the 70s and sup-ported by an increased environmental awareness, photo-voltaics began to move towards economic efficiency 20 years later.

In a few years, these efforts will result in the so-called grid parity – the point when power generation using photo-voltaics will be equal in costs to conventional power. In Germany, grid parity is expected to be reached in 2012.

Potential of PhotovoltaicsThe amount of sun energy impacting the earth as light and warmth is 1.5 · 1018 kWh per annum; this corresponds ap-proximately to the 15000-fold of the entire primary energy consumption of humanity in 2006 (1.0 · 1014 kWh/year). This irradiation energy can be captured by the photovoltaic effect and partially converted to electricity, without the generation of undesirable by-products such as emissions (e.g. CO2) or nuclear waste.

Central Europe on average can assume an annually irradi-ated output of 1000 kWh/m2, Southern Europe achieves values of 1700 kWh/m2, some desert regions even more than 2300 kWh/m2. If Central Europe wanted to cover the world’s power needs with the irradiated solar energy, an area of 400 by 400 kilometres would be required.

Global annual solar irradiation in kWh/m²© meteonorm

Global market volume for photovoltaics systems © Solarpraxis

0200400600800

1 0001 2001 4001 6001 8002 0002 2002 4002 6002 800

Year

1992 1994 1994 1998 2000 2002 2004 2006 2008

MW

p/a

5 75

0 M

Wp

7

The Functional Principle of the Solar Cell Today’s solar cells mostly consist of the base material silicon, that is divided into two layers (p and n layer) with different electric properties by doping with boron or phosphorus and thus becomes a diode. In contrast to the conventional semiconductor diode found in electronic circuits and recti-fiers, the solar cell is optimised to exploit incident sun light. For this purpose solar cells are manufactured with as large a surface as possible. The so-called p-n junction here is only just below the surface exposed to the solar irradiation.

At the p-n junction an electric field is building that has a pull effect on free (mobile in the material) charge carriers. The photons (light energy packages) of the incident sun light penetrate the cell material and now produce free charge carriers (electrons and holes) in proximity to the p-n junction. These are separated from the inner field and swept to the electric connecting contacts on the top and bottom side of the cell. There they are available for use in an external circuit. Each cell has a usable voltage of 0.5 to 0.6 Volt, which can be increased to any value by connecting several cells in series. In solar modules the cells are partially connected in series and parallel, in order to achieve the op-timum usable operating voltages.

The production rate of the free charge carriers increases in proportion to the intensity of the solar irradiation. The photons’ energy is converted to electric power to the amount of approx. 15 % corresponding to the cell’s efficien-cy. The rest heats the solar cell and is discharged to the en-vironment by means of heat transport processes. At stand-ard test conditions (STC: 1000 W/m2, temperature 25° C, AirMass 1.5) up to 2.5 Ampere solar power and therefore approx. 1.5 W electric peak capacity can be expected per dm2 of cell surface.

Due to their energy and material efficiency and therefore due to their lower costs, thin-film technologies show the greatest potential in the long term. Currently three differ-ent technologies are on the market: the amorphous/micro-crystalline silicon technology, the CdTe based technology and the copper indium selenide (CIS) technology. Though these technologies are still in their infancy, manufacturers are working flat out on their development.

Yield of a Photovoltaic Installation The yield generated by a photovoltaic installation during a year is also called solar yield. A significant factor for the yield assessment of photovoltaic installations is the per-formance ratio. For this the yield of the photovoltaic instal-lation is divided by the installed photovoltaic output and the annual irradiation. A performance ratio of more than 80 % indicates a good ratio of yield and irradiated solar out-put. Among the factors affecting the yield are the location of the photovoltaic installation, the orientation and the climate or the intensity and length of the solar irradiation.

By means of special diagrams, the solar irradiation can be calculated depending on the mounting angle and the ori-entation. In Central Europe the solar irradiation is greatest at an orientation to the South and an angle of 30°. A sys-tem with orientation to the South-West and a mounting angle of 30° for example, would achieve an annual solar irradiation of approx. 95 % of the maximum.

In order to enable photovoltaic installations to achieve high yields, detailed planning is necessary. On the one hand the used components must be adapted perfectly to the individual requirements, and on the other attention must be given to correct dimensioning and placement with the least possible clouding. In addition, solar modules are daily exposed to wind and weather and must work fault-lessly in spite of all adversities. Therefore, high-quality and durable products are another important prerequisite for good yields of photovoltaic systems.

Grid-connected Photovoltaic Systems Design of Grid-connected PhotovoltaicInstallations Grid-connected systems are photovoltaic installations that are connected to the public grid and feed the entire electric power generated by the solar energy to the grid. The size of a grid-connected system depends on different factors: roof/facade surface, financial resources and statutory provi-sions. Most European private grid-connected systems have an output of two to ten kilowatt. If an installation on a pitched roof is supposed to achieve such a yield, the re-quired roof surface for two kilowatt (PV) is approximately 18 m2 and approximately 90 m2 for ten kilowatt.

The essential components of grid-connected PV installation are photovoltaic modules, inverters, a mounting system, a protective device to automatically switch off in case of mains malfunctions and a meter to record the amount of power supplied. Two factors are essential for a high-yield system: 1. The quality of the installed products, incl. acces-sories (e.g. wiring); 2. The different components must be optimally coordinated.

For 23 years now, TRITEC has been a photovoltaic system provider with a wide and premium range of quality pro-ducts. Be it a stand-alone system for a remote mountain church in the Bündner Alps or a large system on the roof of a department store in Spain – we are happy to support you in the planning as well as in case of queries regarding the approval and financing of photovoltaic installations.

8

1. PV array2. Mounting system3. Wiring4. PV array combiner/junction box5. Grid-connected inverter6. Import/export meter7. Connection to grid8. Consumer loads

Principle of a grid-connected photovoltaic system © Solarpraxis

Functional principle of a crystalline solar cell © Solarpraxis

Annual irradiation (%) © DGS / Solarpraxis

1

2

34

8

76 5

9

Photovoltaic installations, operated independently from the mains supply, are also called stand-alone systems. The power generated by means of solar modules is stored in batteries or can be supplied directly to consumers. This solution is chosen for remote locations (weekend houses, Alpine huts, farm houses etc.), where a connection to the mains supply does not make economic sense due to the cost of new cables (e.g. street lighting, emergency tele-phones etc.) or is simply impossible (caravans, marine, re-mote places).

The correct dimensioning of a stand-alone power installa-tion is essential. Correct in this context does not mean oversized; the aim is the optimal combination of technical expedience and affordability. The following four questions help in determining the correct size of a system:

How much power is used in what time?How many and which consumers must be supplied, and how great is the energy consumption at which time?

What is the consumers’ rated voltage?Is it necessary to use a stand-alone inverter for 230 or 120 V or can new consumers with 12 or 24 V be used?

How long are the consumers supposed to be able to operate with insufficient sunlight (autonomous time)? Determination of the number and size of the batteries.

How long are the batteries supposed to take to fully recharge?This determines the number and capacity of the solar modules.

A list of all consumers provides information on the power consumption to be expected. When combined with the cal-culated daily time of use, the daily required power demand can be determined in watt-hours (Wh) or in ampere-hours (Ah).

For direct operation (pumps, fans, electric motors etc.) out-put and operating voltage of the module must correspond with the connected load and operating voltage of the con-sumer. Therefore, a 54 watt solar module would be suffi-cient for a 50 watt consumer. If the consumer however needs to be operated even with insufficient solar irradia-tion, the module’s output must be increased correspond-ingly. At the same time it is important to avoid an overload of the consumer through excessively high voltage in case of strong solar irradiation.

Stand-alone systems require special devices and lights. In addition to special solar modules, these include stand-alone inverters and accumulators/batteries, which can process great and small charge currents to a high level of efficiency, a charge controller, which in turn protects the battery against overloading. Additionally, a load control protects against total discharge.

TRITEC supplies quality products that are especially suitable for stand-alone systems, and has many years of know-how in the design of such systems.

Stand-alone Systems – Independent Photovoltaic Installations

Principle of a stand-alone photovoltaic system © Solarpraxis

Ziteil Pilgrimage Church 1.7 kWp, Salouf GR (Switzerland)Designed and installed by TRITEC

11

Solar ModulesWe offer solar modules of the latest generation: forgridintegrated equipment, stand-alone solutions,emergency power supply, pumping systems, solar powerplants, telecommunication or traffic signals.

KYOCERA

SANYO

SCHOTT SOLAR

SOLARWORLD

SUNTECH

13

The KD series – Large-area photovoltaic moduleswith new frameAdvanced technologyThanks to Kyocera's advanced cell processing technol-ogy, intensive research and automated productionfacilities they are able to produce a highly efficientpolycrystalline photovoltaic module.

High efficiencyThe embedded Kyocera high-performance solar cellswith the basic measurement 156 x 156 mm achieve anefficiency of over 16 % and guarantee an extremelyhigh annual energy output of the photovoltaic plant.

Improved aluminium frameThese cells are encapsulated between a tempered glasscover (resistance to impact of hail acc. to IEC 61215 ed.2 tested by the TÜV – Technical Control Association)and an EVA pottant with back sheet to provide effi-cient protection from the severest environmental con-ditions. The entire laminate is installed in an anodizedaluminum frame to provide structural strength and

ease of mounting, which now has a height of 46 mmand can tolerate stresses of up to 5400 N/m².

The connecting box on the back is provided withbypass diodes preventing the risk of overheating ofindividual solar cells (hot spot effect). Several PV mod-ules connected in series can easily be wired up usingpre-assembled solar cables and MultiContact plugs.

Kyocera manufactures all components in its own man-ufacturing plants – without the acquisition of semifinished products – for a constantly high quality of itsproducts.

Range of applicationn Private residencesn Industrial and large plantsn Agricultural operationsn Free-standing plantsn Solar energy plants

W

L

H c d

ab

The new KD series from Kyocera with increased efficiencyand performance.

The KD series has new dimensions and thus is incompatiblewith previous models of the KC series.

...................................................................................................................................................................SOLAR MODULES Framed Modules...................................................................................................................................................................

14

Art. No. 0101118 0101119 0101138 0101121

Model KD135GH-2PU KD180GH-2PU KD185GH-2PU KD210GH-2PUNominal power 135 W ±5 % 180 W ±5 % 185 W ±5 % 210 W ±5 %Max. system voltage 1000 V 1000 V 1000 V 1000 VOperating voltage 17.7 V 23.6 V 23.6 V 26.6 VOperating current 7.63 A 7.63 A 7.84 A 7.90 AOpen circuit voltage 22.1 V 29.5 V 29.5 V 33.2 VShort circuit current 8.37 A 8.35 A 8.58 A 8.58 ATemp. coefficient voltage -0.80 x 10⁻¹ V/°C -1.06 x 10⁻¹ V/°C -1.06 x 10⁻¹ V/°C -1.20 x 10⁻¹ V/°CTemp. coefficient current 5.02 x 10⁻³ A/°C 5.01 x 10⁻³ A/°C 5.15 x 10⁻³ A/°C 5.15 x 10⁻³ A/°CNOCT 47.9 °C 47.9 °C 47.9 °C 47.9 °CReverse current load 15 A 15 A 15 A 15 AMax. string protection 15 A 15 A 15 A 15 ACells per module 36 pc. 48 pc. 48 pc. 54 pc.Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmCell connection 3 bus bar 3 bus bar 3 bus bar 3 bus barConnection MC PV-KBT3 / MC PV-KST3,

cables, 840 (-) / 840 (+) mmMC PV-KBT3 / MC PV-KST3,cables, 670 (-) / 870 (+) mm

MC PV-KBT3 / MC PV-KST3,cables, 670 (-) / 870 (+) mm

MC PV-KBT3 / MC PV-KST3,cables, 750 (-) / 950 (+) mm

Mounting frame Black anodized aluminium Black anodized aluminium Black anodized aluminium Black anodized aluminiumDimensions (L / W / H) 1500 mm / 668 mm / 46 mm 1338 mm / 990 mm / 46 mm 1338 mm / 990 mm / 46 mm 1500 mm / 990 mm / 46 mmLengths (a / b / c / d) 471.5 mm / 278.5 mm /

12.5 mm / 643 mm412.5 mm / 256.5 mm /12.5 mm / 965 mm

412.5 mm / 256.2 mm /12.5 mm / 965 mm

471.5 mm / 278.5 mm /12.5 mm / 965 mm

Weight 12.5 kg 16.0 kg 16.0 kg 18.0 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 10 / 20 years 10 / 20 years 10 / 20 years 10 / 20 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61215 ed. 2, IEC 61730,

protection class II,TÜVdotCOM-ID: 0000023299

IEC 61215 ed. 2, IEC 61730,protection class II,TÜVdotCOM-ID: 0000023299



Art. No. 0101209 0101210 0101211

Model KD215GH-2PU KD230GH-2PB KD235GH-2PBNominal power 215 W +5 %, -3 % 230 W +5 %, -3 % 235 W +5 %, -3 %Max. system voltage 1000 V 1000 V 1000 VOperating voltage 26.6 V 29.8 V 29.8 VOperating current 8.09 A 7.72 A 7.89 AOpen circuit voltage 33.2 V 36.9 V 36.9 VShort circuit current 8.78 A 8.36 A 8.55 ATemp. coefficient voltage -1.20 x 10⁻¹ V/°C -1.33 x 10⁻¹ V/°C -1.33 x 10⁻¹ V/°CTemp. coefficient current 5.27 x 10⁻³ A/°C 5.02 x 10⁻³ A/°C 5.13 x 10⁻³ A/°CNOCT 47.9 °C 47.9 °C 47.9 °CReverse current load 15 A 15 A 15 AMax. string protection 15 A 15 A 15 ACells per module 54 pc. 60 pc. 60 pc.Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmCell connection 3 bus bar 3 bus bar 3 bus barConnection MC PV-KBT3 / MC PV-KST3, cables, 750 (-)

/ 950 (+) mmMC PV-KBT3 / MC PV-KST3, cables, 830 (-)/ 1030 (+) mm

MC PV-KBT3 / MC PV-KST3, cables, 830 (-)/ 1030 (+) mm

Mounting frame Black anodized aluminium Black anodized aluminium Black anodized aluminiumDimensions (L / W / H) 1500 mm / 990 mm / 46 mm 1662 mm / 990 mm / 46 mm 1662 mm / 990 mm / 46 mmLengths (a / b / c / d) 471.5 mm / 278.5 mm / 12.5 mm / 965 mm 1100.0 mm / 550.0 mm / 12.5 mm /

965 mm1100.0 mm / 550.0 mm / 12.5 mm /965 mm

Weight 18.0 kg 21.0 kg 21.0 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 10 / 20 years 10 / 20 years 10 / 20 yearsProduct warranty 5 years 5 years 5 yearsNorms IEC 61215 ed. 2, IEC 61730, protection

class II, TÜVdotCOM-ID: 0000023299IEC 61215 ed. 2, IEC 61730, protectionclass II, TÜVdotCOM-ID: 0000023299

IEC 61215 ed. 2, IEC 61730, protectionclass II, TÜVdotCOM-ID: 0000023299

* - Manufacturer's performance warranty: 10 years on 90 % / 20 years on 80 % of the minimal nominal power under standard testing conditions (STC)

The electrical specifications are under standard test conditions (STC) of irradiance of 1000 W/m², spectrum of 1.5 air mass and cell temperature of 25°C.

...................................................................................................................................................................Framed Modules SOLAR MODULES

...................................................................................................................................................................

TRITEC Group www.tritec-energy.com | © 20100512-1 | The content of this datasheet is subject to change without prior notice

15

The KD series – Versatile cutting-edge technologyfor stand-alone systems

Advanced technologyThanks to Kyocera's advanced cell processing technol-ogy, intensive research and automated productionfacilities they are able to produce a highly efficientpolycrystalline photovoltaic module.

6" cellsThe new cell generation of the Kyocera high-perform-ance solar cells has been introduced a short while agowith the bigger Kyocera modules. Now the smallerpanels of the KD series are also equipped with thiscell. The almost black cell has three cell connectorsand achieves a very high efficiency. This guaranteesan extremely high annual energy output of the photo-voltaic plant.

Flexible connecting boxAll KDmodules suitable for non-grid-connected powersupply (module types with -1P designation) now again

feature an accessible connecting box. The solar cablescan therefore bemounted flexibly, whichmakes instal-lations of stand-alone systems significantly easieragain.

Kyocera grants a 20 years performance warranty forKD models according to the warranty conditions.

Range of applicationn Stand-alone solar power systems for villages inremote areas, homes and summer cottages, radiorepeater stations or medical facilities in rural areas

n Emergency power systems and disaster controln Pumping systems (e.g. for drinking water supply inremote areas and irrigation)

n Telecommunication

The new KD series – from back to front:KD135SX-1PU, KD95SX-1P, KD70SX-1P and KD50SE-1P.

The accessible connecting box for the individual connectiondoes not have pre-assembled cables.


16

Art. No. 0101122 0101123 0101125 0101126

Model KD50SE-1P KD70SX-1P KD95SX-1P KD135SX-1PUNominal power 50 W +10 %, -5 % 70 W +10 %, -5 % 95 W +10 %, -5 % 135 W ±5 %Max. system voltage 750 V 750 V 750 V 750 VOperating voltage 17.9 V 17.9 V 17.9 V 17.7 VOperating current 2.80 A 3.92 A 5.31 A 7.63 AOpen circuit voltage 22.1 V 22.1 V 22.1 V 22.1 VShort circuit current 3.07 A 4.30 A 5.81 A 8.37 AConnection Screw terminals Screw terminals Screw terminals Screw terminalsMounting frame Silvery anodized aluminium Silvery anodized aluminium Silvery anodized aluminium Black anodized aluminiumDimensions (L / W / H) * 706 mm / 744 mm / 36 mm 778 mm / 660 mm / 36 mm 1043 mm / 660 mm / 36 mm 1500 mm / 668 mm / 46 mmMounting holes (a / b / c) 112.0 mm / 324.0 mm /

29.0 mm148.0 mm / 360.0 mm /29.0 mm

280.5 mm / 492.5 mm /29.0 mm

471.5 mm / 278.5 mm /12.5 mm

Weight 6.5 kg 6.5 kg 8.5 kg 12.5 kgMax. load 2400 N/m² 2400 N/m² 2400 N/m² 5400 N/m²Performance warranty ** 10 / 20 years 10 / 20 years 10 / 20 years 10 / 20 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61215 ed. 2, IEC 61730,

protection class II,TÜVdotCOM-ID: 0000023574




* - The connection box at the back of each module protrudes the aluminium frame. At this point the module has a height of 45 mm.

** - Manufacturer's performance warranty: 10 years on 90% / 20 years on 80% of the minimal nominal power under standard testing conditions (STC)


W H c

L

ab

The KD135SX-1PU is already available with the new 46 mmframe; all other stand-alone modules of the KD seriescontinue to be based on the 36 mm frame.

The dimensions and the mounting holes.


...................................................................................................................................................................


17

Sanyo HIP series – Modules with powerful HITsolar cells

HIT solar cellsAll modules of the Sanyo HIP series are equipped withthe new HIT solar cell technology. The Sanyo HIT solarcell (Heterojunctionwith Intrinsic Thin layer) consists ofmonocrystalline hybrid wafers coated with thin amor-phous silicon. The modern manufacturing processallows for the manufacture of solar cells with the high-est levels of efficiency and optimum energy yields.

High efficiencyIn commercial solar products worldwide, HIT solar cellsachieve one of the highest efficiencies. Compared toconventional solar cells with crystalline silicon, the HIT

cells convincewith their high energy yield, even at hightemperatures.

Environmentally friendlyAnnually, HIT solar cells can yield more output persurface than conventional crystalline solar cells. Dueto the small dimensions, maximum output can beachieved even on small surfaces.

Advantages in briefn Highest level of efficiencyn Maximum energy yieldsn More output per surfacen Small dimensions

The modules of the Sanyo HIP-NKHE series are based onhybrid HIT solar cells (amorphous and monocrystalline sili-con) with the highest levels of efficiency.

The series Sanyo HIP-HDE employs HD-HIT solar cells, whichoptimally exploit the raw material silicon, due to their geo-metric design.


18

Art. No. 0101149 0101160 0101150 0101158 0101159

Model Sanyo HIP-210NKHE5 Sanyo HIP-214NKHE5 Sanyo HIP-215NKHE5 Sanyo HIT-235HDE4 Sanyo HIT-240HDE4Nominal power 210 W +10 %, -5 % 214 W +10 %, -5 % 215 W +10 %, -5 % 235 W +10 %, -5 % 240 W +10 %, -5 %Max. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 41.3 V 41.9 V 42.0 V 35.1 V 35.5 VOperating current 5.09 A 5.12 A 5.13 A 6.70 A 6.77 AOpen circuit voltage 50.9 V 51.5 V 51.6 V 43.4 V 43.6 VShort circuit current 5.57 A 5.60 A 5.61 A 7.33 A 7.37 ATemp. coefficient power -0.30 %/°C -0.30 %/°C -0.30 %/°C -0.30 %/°C -0.30 %/°CTemp. coefficient voltage -127 mV/°C -129 mV/°C -129 mV/°C -109 mV/°C -109 mV/°CTemp. coefficient current 1.67 mA/°C 1.68 mA/°C 1.68 mA/°C 2.20 mA/°C 2.21 mA/°CCells per module 72 pc. 72 pc. 72 pc. 60 pc. 60 pc.Cell type HIT solar cell,

monocrystallineHIT solar cell,monocrystalline

HIT solar cell,monocrystalline



Cell dimensions 125 / 125 mm 125 / 125 mm 125 / 125 mm Ø 166 mm Ø 166 mmConnection MC3 connectors, cable

960 mm each (+ / ‑)MC3 connectors, cable960 mm each (+ / ‑)

MC3 connectors, cable960 mm each (+ / ‑)



Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1580 mm ±2 mm /

798 mm ±2 mm / 35 mm±1 mm

1580 mm ±2 mm /798 mm ±2 mm / 35 mm±1 mm

1580 mm ±2 mm /798 mm ±2 mm / 35 mm±1 mm

1610 mm ±2 mm /861 mm ±2 mm / 35 mm±1 mm

1610 mm ±2 mm /861 mm ±2 mm / 35 mm±1 mm

Weight 15.0 kg (approx.) 15.0 kg (approx.) 15.0 kg (approx.) 16.5 kg (approx.) 16.5 kg (approx.)Max. load 2400 N/m² 2400 N/m² 2400 N/m² 2400 N/m² 2400 N/m²Performance warranty * 10 / 20 years 10 / 20 years 10 / 20 years 10 / 20 years 10 / 20 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215, CE

mark, protection class II,TÜVdotCOM-ID:0000022408

IEC 61730, IEC 61215, CEmark, protection class II,TÜVdotCOM-ID:0000022408






At very high module temperatures the HIT solar cellsgenerate clearly higher outputs, compared to monocrystal-line cells.

The special HD (Honeycomb Design) HIT solar cells requireless silicon per Wp, which reduces the amortisation period.


...................................................................................................................................................................


19

Schott ASI Series – The next generation

Schott ASI technologySchott ASI thin-film solar modules guarantee an aboveaverage high performance and energy yield. Moreenergy, the robust encapsulation, the quick and easyinstallation and the top safety – all these are featurescontributing to the top quality of the ASI modules.

Proven and tested qualityOnly the highest quality of the individual componentscan achieve the highest energy yields. Themodules aredesigned – from frame to junction box – for cost-effec-tive and high-quality system integration. Schott mod-ules have been awarded top ratings in a number ofindependent studies and surveys.

More energyThe proven Schott ASI modules stand for high, stableperformance and longevity. Independent surveys haveshown that under real operation conditions – such asclouded skies or high ambient temperatures – themodules deliver extremely high energy yields.

Easy installationInstallation of Schott ASI modules can be extremelyquick and easy. This is not least due to the anodisedaluminium frame and the pre-installed cables withTyco connectors. The by-pass diodes of the modulesare already integrated into the electrical connectionboxes at the rear of the modules.

The modules of the Schott ASI series are based on amor-phous thin-film silicon.

The Schott ASI thin-film modules are suited for buildingfronts and roofs that are not optimally oriented.


20

Art. No. 0101130 0101111 0101112 0101132

Model Schott ASI 87 Schott ASI 90 Schott ASI 95 Schott ASI 100Nominal power 87 W ±5 % 90 W ±5 % 95 W ±5 % 100 W ±5 %Max. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 17.2 V ±10 % 17.3 V ±10 % 17.4 V ±10 % 17.5 V ±10 %Operating current 5.07 A ±10 % 5.21 A ±10 % 5.47 A ±10 % 5.71 A ±10 %Open circuit voltage 23.3 V ±10 % 23.4 V ±10 % 23.6 V ±10 % 23.8 V ±10 %Short circuit current 6.50 A ±10 % 6.60 A ±10 % 6.69 A ±10 % 6.79 A ±10 %Temp. coefficient power -0.20 %/°C -0.20 %/°C -0.20 %/°C -0.20 %/°CTemp. coefficient voltage -0.31 %/°C -0.31 %/°C -0.31 %/°C -0.31 %/°CTemp. coefficient current 0.08 %/°C 0.08 %/°C 0.08 %/°C 0.08 %/°COperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C

Cell type a-Si (amorphous silicon) a-Si (amorphous silicon) a-Si (amorphous silicon) a-Si (amorphous silicon)Connection Tyco-Connectors, cable 1.2 m

each (+ / ‑)Tyco-Connectors, cable 1.2 meach (+ / ‑)

Tyco-Connectors, cable 1.2 meach (+ / ‑)

Tyco-Connectors, cable 1.2 meach (+ / ‑)

Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1108 mm ±3 mm / 1308 mm

±3 mm / 50 mm ±1 mm1108 mm ±3 mm / 1308 mm±3 mm / 50 mm ±1 mm

1108 mm ±3 mm / 1308 mm±3 mm / 50 mm ±1 mm

1108 mm ±3 mm / 1308 mm±3 mm / 50 mm ±1 mm

Weight 18 kg (approx.) 18 kg (approx.) 18 kg (approx.) 18 kg (approx.)Max. load 2400 N/m² 2400 N/m² 2400 N/m² 2400 N/m²Performance warranty * 10 / 25 years 10 / 25 years 10 / 25 years 10 / 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61646, EWG

guideline 89/392 (CE)IEC 61730, IEC 61646, EWGguideline 89/392 (CE)

IEC 61730, IEC 61646, EWGguideline 89/392 (CE)

IEC 61730, IEC 61646, EWGguideline 89/392 (CE)



Photos © Schott Solar AG


...................................................................................................................................................................


21

Schott Poly 5" Series – The Allrounders

Maximum energyThe high performance modules Schott Poly165/170/175/180 are made of high-quality crystallinesolar cells. The special Schott Solar cell technology,using multicrystalline wafers, ensures optimum outputand efficiency. The innovative isotexturing of the cellsallows the module's performance to be increased fur-ther; additionally it provides a homogeneous appear-ance of the dark-blue cells. These modules have beenawarded top ratings in a number of independent stud-ies and surveys.

Narrow output toleranceA very narrow module output selection permits serialconnection with low connection losses.

Quick and easy installationThe anodized aluminum frame and the preinstalledcable with Tyco-Connectors ensure quick and easyinstallation. Schott modules are designed – from frameto connection box – for cost-effective system integra-tion.

System voltage up to 1000 VThe Safety Class II module is configured for systemvoltage of up to 1000V. It is suitable for grid-connectedsystems.

Due to advanced manufacturing, the Schott modulesachieve a maximum energy yield.

Current/voltage characteristics with dependence on irradi-ance and module-temperature.


22

Art. No. 0101034 0101037 0101042 0101107

Model Schott Poly 165 Schott Poly 170 Schott Poly 175 Schott Poly 180Nominal power 165 W ±4 % 170 W ±4 % 175 W ±4 % 180 W ±4 %Max. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 35.1 V ±10 % 35.5 V ±10 % 35.9 V ±10 % 36.3 V ±10 %Operating current 4.70 A ±10 % 4.78 A ±10 % 4.87 A ±10 % 4.95 A ±10 %Open circuit voltage 43.6 V ±10 % 44.0 V ±10 % 44.3 V ±10 % 44.6 V ±10 %Short circuit current 5.27 A ±10 % 5.30 A ±10 % 5.34 A ±10 % 5.39 A ±10 %Temp. coefficient power -0.47 %/°C -0.47 %/°C -0.47 %/°C -0.47 %/°CTemp. coefficient voltage -0.38 %/°C -0.38 %/°C -0.38 %/°C -0.38 %/°CTemp. coefficient current 0.10 %/°C 0.10 %/°C 0.10 %/°C 0.10 %/°COperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C

Cells per module 72 pc. 72 pc. 72 pc. 72 pc.Cell type MAIN solar cell, multi-

crystalline, isotexturedMAIN solar cell, multi-crystalline, isotextured

MAIN solar cell, multi-crystalline, isotextured


Cell dimensions (L / W) 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mmConnection Tyco-Connectors, cable 1 m

each (+ / ‑)Tyco-Connectors, cable 1 meach (+ / ‑)

Tyco-Connectors, cable 1 meach (+ / ‑)

Tyco-Connectors, cable 1 meach (+ / ‑)

Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1620 mm ±3 mm / 810 mm

±3 mm / 50 mm ±1 mm1620 mm ±3 mm / 810 mm±3 mm / 50 mm ±1 mm

1620 mm ±3 mm / 810 mm±3 mm / 50 mm ±1 mm

1620 mm ±3 mm / 810 mm±3 mm / 50 mm ±1 mm

Weight 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 10 / 25 years 10 / 25 years 10 / 25 years 10 / 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed. 2,

protection class II, EWGguideline 89/392 (CE)

IEC 61730, IEC 61215 ed. 2,protection class II, EWGguideline 89/392 (CE)







...................................................................................................................................................................


23

Schott Poly 6" Series – The Top Performers

Maximum energyThe new Schott Poly 210/217/220/225/230 series is man-ufactured from 6" cells, which generate significantlymore power due to the greater cell surface. The specialSchott Solar cell technology, using multicrystallinewafers, ensures optimum output and efficiency. Theinnovative isotexturing of the cells allows themodule'sperformance to be increased further; additionally itprovides a homogeneous appearance of the dark-blue cells. These modules have been awarded top rat-ings in a number of independent studies and surveys.

Narrow output toleranceThe particularly close selection ofmodule performanceallows serial connection with small connection losseswithout complex sorting.

Simple installation and greatest stabilityThe anodized aluminum frame and the preinstalledcable with Tyco-Connectors ensure quick and easyinstallation. The framed Schott modules are designedfor loads of up to 5400 N/m².

System voltage up to 1000 VThe Safety Class II module is configured for systemvoltage of up to 1000V. It is suitable for grid-connectedsystems.

Schott Poly 210/217/220/225/230 convinces with particularlyhigh nominal power; due to the 6 inch cells, the modulesurface is utilised optimally.

The close selection of module performance makes theSchott Poly 210/217/220/225/230 ideal for individual installa-tions as well as for large-scale installations.


24

Art. No. 0101117 0101113 0101154 0101114 0101155

Model Schott Poly 210 Schott Poly 217 Schott Poly 220 Schott Poly 225 Schott Poly 230Nominal power 210 W ±4 % 217 W ±4 % 220 W ±4 % 225 W ±4 % 230 W ±4 %Max. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 29.3 V ±10 % 29.6 V ±10 % 29.7 V ±10 % 29.8 V ±10 % 30.0 V ±10 %Operating current 7.16 A ±10 % 7.33 A ±10 % 7.41 A ±10 % 7.55 A ±10 % 7.66 A ±10 %Open circuit voltage 36.1 V ±10 % 36.4 V ±10 % 36.5 V ±10 % 36.7 V ±10 % 36.9 V ±10 %Short circuit current 7.95 A ±10 % 8.10 A ±10 % 8.15 A ±10 % 8.24 A ±10 % 8.33 A ±10 %Temp. coefficient power -0.47 %/°C -0.47 %/°C -0.47 %/°C -0.47 %/°C -0.47 %/°CTemp. coefficient voltage -0.38 %/°C -0.38 %/°C -0.38 %/°C -0.38 %/°C -0.38 %/°CTemp. coefficient current 0.10 %/°C 0.10 %/°C 0.10 %/°C 0.10 %/°C 0.10 %/°COperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C

Cells per module 60 pc. 60 pc. 60 pc. 60 pc. 60 pc.Cell type MAIN solar cell, multi-

crystalline, isotexturedMAIN solar cell, multi-crystalline, isotextured




Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection Tyco-Connectors, cable

1.1 m each (+ / ‑)Tyco-Connectors, cable1.1 m each (+ / ‑)

Tyco-Connectors, cable1.1 m each (+ / ‑)



Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1685 mm ±3 mm /

993 mm ±3 mm / 50 mm±1 mm

1685 mm ±3 mm /993 mm ±3 mm / 50 mm±1 mm

1685 mm ±3 mm /993 mm ±3 mm / 50 mm±1 mm

1685 mm ±3 mm /993 mm ±3 mm / 50 mm±1 mm

1685 mm ±3 mm /993 mm ±3 mm / 50 mm±1 mm

Weight 23 kg (approx.) 23 kg (approx.) 23 kg (approx.) 23 kg (approx.) 23 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 10 / 25 years 10 / 25 years 10 / 25 years 10 / 25 years 10 / 25 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed.

2, protection class II,EWG guideline 89/392(CE)

IEC 61730, IEC 61215 ed.2, protection class II,EWG guideline 89/392(CE)








...................................................................................................................................................................


25

Schott Poly Double Glass – Extremely well built

More than 50 years of experienceFor more than 50 years, Schott Solar is developing andproducing solar modules and components for powergeneration. The new crystalline photovoltaic modulesare characterised by their high yield performance andlong life-cycle. The Schott Poly 280, 290 and 300 aretested under internal guidelines for a test time, whichis twice the time demanded by the IEC standard. Thisguarantees optimum quality.

Optimum resilienceThe use of double glass achieves a long module life-cycle. The anodised and cavity-free aluminium frameadditionally warrants a high distortion resistance. Themodules withstand surface and snow loads of up to550 kg per square meter, which ensures a high degreeof safety.

Best performanceIn order to allow serial wiring with the least wiringlosses possible, only cells with particularly small outputtolerances are used within the modules. The increasedreverse current resistance minimises the wiring expen-diture. All modules have only a positive tolerance oftheir nominal power rating, thus ensuring consistentlyhigh energy yields.

Advantages in briefn Long life-cycle through double glassn Semi-transparentn Double standard of qualityn High resiliencen Highest principle of specific performancen Long-term reliabilityn Increased reverse current resistance

grounding hole - symbol

grounding hole

582

1313±31281±3 16

1685±3

approx. 105

15.5

26

572.5

437.5

Ø 9

(4x)

Ø 4.25(2x)

810±3

all dimensions in mm

The semi-transparent Schott Poly 280/290/300 are particu-larly suitable for high static demands, due to their doubleglass design.

The Schott Poly 280/290/300 are among the most powerfulmodules to be found on the market.


26

Art. No. 0101134 0101135 0101136

Model Schott Poly 280 Schott Poly 290 Schott Poly 300Nominal power 280 W ±4 % 290 W ±4 % 300 W ±4 %Max. system voltage 1000 V DC 1000 V DC 1000 V DCOperating voltage 39.1 V ±10 % 39.5 V ±10 % 39.7 V ±10 %Operating current 7.16 A ±10 % 7.33 A ±10 % 7.55 A ±10 %Open circuit voltage 48.1 V ±10 % 48.5 V ±10 % 48.9 V ±10 %Short circuit current 7.95 A ±10 % 8.10 A ±10 % 8.24 A ±10 %Temp. coefficient power -0.47 %/°C -0.47 %/°C -0.47 %/°CTemp. coefficient voltage -161 mV/K -162 mV/K -163 mV/KTemp. coefficient current 2.39 mA/K 2.43 mA/K 2.47 mA/KOperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C

Cells per module 80 pc. 80 pc. 80 pc.Cell type MAIN solar cell, multi-crystalline,

isotexturedMAIN solar cell, multi-crystalline,isotextured

MAIN solar cell, multi-crystalline,isotextured

Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection Tyco-Connectors, cable, 0.9 (-) / 2.1 (+) m Tyco-Connectors, cable, 0.9 (-) / 2.1 (+) m Tyco-Connectors, cable, 0.9 (-) / 2.1 (+) mMounting frame Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1685 mm ±3 mm / 1313 mm ±3 mm /

50 mm ±1 mm1685 mm ±3 mm / 1313 mm ±3 mm /50 mm ±1 mm

1685 mm ±3 mm / 1313 mm ±3 mm /50 mm ±1 mm

Weight 41.5 kg (approx.) 41.5 kg (approx.) 41.5 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 10 / 30 years 10 / 30 years 10 / 30 yearsProduct warranty 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed. 2, protection

class II, CE markIEC 61730, IEC 61215 ed. 2, protectionclass II, CE mark

IEC 61730, IEC 61215 ed. 2, protectionclass II, CE mark





...................................................................................................................................................................


27

SolarWorld Sunmodule+ MonoFeaturing monocrystalline 6" cells

InnovationWith the series Sunmodule+ Mono, SolarWorld pre-sents a new module concept for the performance cat-egories 220 to 245 Wp. Without costly sorting on site,the Plus sorting ensures the highest levels of efficiencyand yield. The fully automated manufacture of themodules guarantees a constant high product qualityand long-term high yields.

StabilityThe glass is set deep into the module frame and theyare firmly attached to each other by silicone that isapplied with continuous precision. This results in anexcellent stability of themodules, which can bear loadsof up to 5400 N/m² on the front side. Thus the modulescan withstand even great snow and wind loads.

QualityThe patented connection box provides perfect protec-tion against corrosion, as well as a capacity to rapidlydissipate any excess heat providing lower operatingtemperature. The connection box is reliably connectedby a solid, welded bond to guarantee lasting function-ality. The high-quality cables and connectors usedensure highest quality at all times.

Benefitsn Highest efficiency due to Plus sortingn No sorting on siten Best stabilityn Patented connection boxn Highest reliability

The fully automated manufacturing process of SolarWorldprovides for high product quality and long-term high yields.

The new series SW mono black meets even architecturaldesign demands with its black frame and black back foil.


28

Art. No. 0101139 0101140 0101141 0101142 0101143

Model Sunmodule+ SW 220mono

Sunmodule+ SW 225mono




Nominal power 220 W ±3 % 225 W ±3 % 230 W ±3 % 235 W ±3 % 240 W ±3 %Max. system voltage 1000 V 1000 V 1000 V 1000 V 1000 VOperating voltage 29.3 V ±10 % 29.7 V ±10 % 30.0 V ±10 % 30.3 V ±10 % 30.6 V ±10 %Operating current 7.51 A ±10 % 7.59 A ±10 % 7.68 A ±10 % 7.77 A ±10 % 7.87 A ±10 %Open circuit voltage 36.6 V ±10 % 37.3 V ±10 % 37.4 V ±10 % 37.5 V ±10 % 37.6 V ±10 %Short circuit current 8.18 A ±10 % 8.13 A ±10 % 8.16 A ±10 % 8.19 A ±10 % 8.22 A ±10 %Temp. coefficient voltage -0.33 %/K -0.33 %/K -0.33 %/K -0.33 %/K -0.33 %/KTemp. coefficient current 0.036 %/K 0.036 %/K 0.036 %/K 0.036 %/K 0.036 %/KReverse current load Don't apply external

voltages in excess ofUoc to the module

Don't apply externalvoltages in excess ofUoc to the module




Cells per module 60 pc. 60 pc. 60 pc. 60 pc. 60 pc.Cell type Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline siliconCell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection MC-PV4, cable 0.95 m

each (+ / ‑)MC-PV4, cable 0.95 meach (+ / ‑)

MC-PV4, cable 0.95 meach (+ / ‑)



Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1675 mm / 1001 mm /

34 mm1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

Weight 22 kg 22 kg 22 kg 22 kg 22 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 25 years 25 years 25 years 25 years 25 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed.

2, CE markIEC 61730, IEC 61215 ed.2, CE mark

IEC 61730, IEC 61215 ed.2, CE mark



Art. No. 0101144 0101188 0101189 0101190 0101191

Model Sunmodule+ SW 245mono

Sunmodule+ SW 220mono black




Nominal power 245 W ±3 % 220 W ±3 % 225 W ±3 % 230 W ±3 % 235 W ±3 %Max. system voltage 1000 V 1000 V 1000 V 1000 V 1000 VOperating voltage 30.1 V ±10 % 29.4 V ±10 % 29.7 V ±10 % 30.0 V ±10 % 30.3 V ±10 %Operating current 8.14 A ±10 % 7.50 A ±10 % 7.59 A ±10 % 7.68 A ±10 % 7.77 A ±10 %Open circuit voltage 37.3 V ±10 % 37.2 V ±10 % 37.3 V ±10 % 37.4 V ±10 % 37.5 V ±10 %Short circuit current 8.78 A ±10 % 8.10 A ±10 % 8.13 A ±10 % 8.16 A ±10 % 8.19 A ±10 %Temp. coefficient voltage -0.33 %/K -0.33 %/K -0.33 %/K -0.33 %/K -0.33 %/KTemp. coefficient current 0.036 %/K 0.042 %/K 0.042 %/K 0.042 %/K 0.042 %/KReverse current load Don't apply external

voltages in excess ofUoc to the module





Cells per module 60 pc. 60 pc. 60 pc. 60 pc. 60 pc.Cell type Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline siliconCell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection MC-PV4, cable 0.95 m

each (+ / ‑)MC-PV4, cable 0.95 meach (+ / ‑)





34 mm1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

1675 mm / 1001 mm /34 mm

Weight 22 kg 22 kg 22 kg 22 kg 22 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 25 years 25 years 25 years 25 years 25 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed.

2, CE markIEC 61730, IEC 61215 ed.2, CE mark




* - Manufacturer's performance warranty: 25 years linear performance warranty – guarantees at least 97 % of the nominal power for the 1st year andthen a maximum output reduction of 0.7 % per year

The electrical specifications are under standard test conditions (STC) of irradiance of 1000 W/m², spectrum of 1.5 air mass and cell temperature of 25°C.Minor reduction in efficiency under partial load conditions at 25°C: at 200 W/m², 95 % (±3 %) of the STC efficiency (1000 W/m²) is achieved.


...................................................................................................................................................................


29

SolarWorld Sunmodule+ Mono compactThe innovative module concept

Greatest efficiencyWith the Plus sorting, SolarWorld AG presents an inno-vative and extremely efficient module concept, whicheliminates time-consuming sorting of modules on site.The fully automated manufacture of the modulesguarantees continuously high quality and long-termhigh yields.

Best stabilityThe module frame and the encased glass are firmlyjoined together using silicone, which ensures thegreatest stability of the modules. This prevents theframe from becoming detached by sliding snow orother environmental influences. The load capacity ofthe front is certified for up to 5400 N/m² according toIEC 61215. Consequently, the module withstands thegreatest snow loads and ice accumulations.

Optimum reliabilityThe patented, flat and compact connecting box guar-antees optimum reliability even after many years. Itprotects against corrosion; in addition, the fast heatdissipation provides optimum temperature stability.The welded connections ensure a reliable electric con-nection inside the box.

Advantages in briefn Greatest efficiency due to Plus sortingn Best stability up to 5400 N/m²n Optimum reliability thanks to patented connectingbox

n Recyclability of modulesn 25 years linear performance guarantee

682

1675

M5

31

950

The Sunmodule+ Mono compact have a visually sophisti-cated design due to the black back foil and the black ano-dised frame.

The new module frame of the Sunmodule+ Mono compactseries has been optimised to 31 mm width and continues toguarantee stability up to 5400 N/m².


30

Art. No. 0101194 0101195 0101196

Model Sunmodule+ SW 145 compact monoblack

Sunmodule+ SW 150 compact monoblack

Sunmodule+ SW 155 compact monoblack

Nominal power 145 W ±3 % 150 W ±3 % 155 W ±3 %Max. system voltage 1000 V 1000 V 1000 VOperating voltage 19.4 V 19.8 V 20.2 VOperating current 7.50 A 7.59 A 7.68 AOpen circuit voltage 24.7 V 24.9 V 25.0 VShort circuit current 8.10 A 8.13 A 8.16 ATemp. coefficient voltage -0.33 %/K -0.33 %/K -0.33 %/KTemp. coefficient current 0.042 %/K 0.042 %/K 0.042 %/KReverse current load Don't apply external voltages in excess of

Uoc to the moduleDon't apply external voltages in excess ofUoc to the module

Don't apply external voltages in excess ofUoc to the module

Cells per module 40 pc. 40 pc. 40 pc.Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection MC-PV4, cable 0.95 m each (+ / ‑) MC-PV4, cable 0.95 m each (+ / ‑) MC-PV4, cable 0.95 m each (+ / ‑)Mounting frame Black anodized aluminium Black anodized aluminium Black anodized aluminiumDimensions (L / W / H) 1675 mm / 682 mm / 31 mm 1675 mm / 682 mm / 31 mm 1675 mm / 682 mm / 31 mmWeight 13 kg 13 kg 13 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 25 years 25 years 25 yearsProduct warranty 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215, protection class II IEC 61730, IEC 61215, protection class II IEC 61730, IEC 61215, protection class II




...................................................................................................................................................................


31

SolarWorld Sunmodule+ PolyFeaturing polycrystalline 6" cells

Top-quality products for every applicationSolarWorld's state-of-the-art, fully automated produc-tion plants produce highest-quality Sunmodule Plussuitable for all applications in solar power technology– from the rooftop to the large-scale plant.

Highest precisionThe Sunmodule Plus by SolarWorld offers an innova-tive module concept. The Plus sorting guaranteeshigher efficiency of the installation and spares thecomplex sorting on site. Additionally, the unique, fullyautomated production process ensures the highestlevel of precision and consistently high productionquality. Also, the machine finishing produces a highlyhomogeneous design.

High stabilityThe polycrystalline 6" cells lie behind a 4 mm hard-ened-glass glazing and are embedded in transparentEVA (ethylene-vinyl-acetate). Theback of themodule issealedwith a very high quality Tedlar film. Themodulestability is the result of the high depth at which theglass is inserted in the frame and adhering the frameusing laminate.

High-quality and reliabilityTheflat and compact connection box ismounted at theback of themodule using a unique, patentedprocess. Ithas no hollow spaces, is watertight, UV-, microbe aswell as temperature resistant. This flat and compacttop-quality product is the ideal solution for every appli-cation.

The unique fully automated production process ensures thequality of the Sunmodule+.

Sunmodule+ are suitable for application in many fields.


32

Art. No. 0101028 0101029 0101030 0101031

Model Sunmodule+ SW 205 poly Sunmodule+ SW 210 poly Sunmodule+ SW 215 poly Sunmodule+ SW 220 polyNominal power 205 W ±3 % 210 W ±3 % 215 W ±3 % 220 W ±3 %Max. system voltage 1000 V 1000 V 1000 V 1000 VOperating voltage 28.5 V 28.7 V 28.9 V 29.2 VOperating current 7.20 A 7.32 A 7.44 A 7.54 AOpen circuit voltage 36.2 V 36.4 V 36.5 V 36.6 VShort circuit current 7.80 A 7.90 A 8.00 A 8.08 ATemp. coefficient voltage -0.34 %/K -0.34 %/K -0.34 %/K -0.34 %/KTemp. coefficient current 0.034 %/K 0.034 %/K 0.034 %/K 0.034 %/KReverse current load Don't apply external voltages

in excess of Uoc to the moduleDon't apply external voltagesin excess of Uoc to the module

Don't apply external voltagesin excess of Uoc to the module


Cells per module 60 pc. 60 pc. 60 pc. 60 pc.Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection MC-PV4, cable 0.95 m each

(+ / ‑)MC-PV4, cable 0.95 m each(+ / ‑)

MC-PV4, cable 0.95 m each(+ / ‑)


Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mmWeight 22 kg 22 kg 22 kg 22 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 25 years 25 years 25 years 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61215 ed. 2, protection

class IIIEC 61215 ed. 2, protectionclass II

IEC 61215 ed. 2, protectionclass II

IEC 61215 ed. 2, protectionclass II

Art. No. 0101032 0101033 0101197 0101198

Model Sunmodule+ SW 225 poly Sunmodule+ SW 230 poly Sunmodule+ SW 235 poly Sunmodule+ SW 240 polyNominal power 225 W ±3 % 230 W ±3 % 235 W ±3 % 240 W ±3 %Max. system voltage 1000 V 1000 V 1000 V 1000 VOperating voltage 29.5 V 29.8 V 30.0 V 30.2 VOperating current 7.63 A 7.72 A 7.85 A 7.96 AOpen circuit voltage 36.8 V 36.9 V 37.0 V 37.2 VShort circuit current 8.17 A 8.25 A 8.35 A 8.44 ATemp. coefficient voltage -0.34 %/K -0.34 %/K -0.34 %/K -0.34 %/KTemp. coefficient current 0.034 %/K 0.034 %/K 0.034 %/K 0.034 %/KReverse current load Don't apply external voltages

in excess of Uoc to the moduleDon't apply external voltagesin excess of Uoc to the module



Cells per module 60 pc. 60 pc. 60 pc. 60 pc.Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection MC-PV4, cable 0.95 m each

(+ / ‑)MC-PV4, cable 0.95 m each(+ / ‑)



Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mm 1675 mm / 1001 mm / 34 mmWeight 22 kg 22 kg 22 kg 22 kgMax. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 25 years 25 years 25 years 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed. 2,

protection class IIIEC 61730, IEC 61215 ed. 2,protection class II

IEC 61730, IEC 61215 ed. 2,protection class II

IEC 61730, IEC 61215 ed. 2,protection class II




...................................................................................................................................................................


33

Suntech MonoFeaturing monocrystalline 5" cells

Solar modules for all applicationsThe monocrystalline solar modules of Suntech can beused in almost all applications. Both in grid-connectedand stand-alone systems, the modules prove them-selves with their great reliability and optimal effi-ciency. With its Black Mono series Suntech offers visu-ally attractive modules. The Pluto series providesextremely efficient modules.

Black MonoSuntech's Black Mono modules are characterised bytheir elegant and simple look and are thus especiallysuitable for visually attractive systems. The extraordi-narily efficient modules are available with outputs of

170, 175 and 180 Watt and combine highest efficiencywith a perfect look.

PlutoWith the modules of the Pluto series Suntech introdu-ces a new series of high-performancemodules.With 10to 15%more efficiency and up to 12% higher energyyields during twilight, the modules of the Pluto seriesare among themonocrystalline topmodels by Suntech.

Advantages in briefn Great reliabilityn Optimal efficiencyn Low output tolerancen Sturdy design for wind and snow loads

The optimised back of the cell and improved anti-reflexcoating at the cell front ensure high efficiency of Suntechsolar cells.

The black foil on the back gives the Black Mono modules ahomogenous and aesthetically pleasing appearance.


34

Art. No. 0101161 0101162 0101163 0101164 0101165

Model Suntech STP170S-24/AdMono

Suntech STP175S-24/AdMono



Suntech STP170S-24/AdBlack Mono

Nominal power 170 W +5 W, -0 W 175 W +5 W, -0 W 180 W +5 W, -0 W 185 W +5 W, -0 W 170 W +5 W, -0 WMax. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 35.6 V 35.8 V 36.0 V 36.4 V 35.6 VOperating current 4.80 A 4.90 A 5.00 A 5.09 A 4.80 AOpen circuit voltage 44.4 V 44.7 V 44.8 V 45.0 V 44.4 VShort circuit current 5.15 A 5.23 A 5.29 A 5.43 A 5.15 ATemp. coefficient power -0.48 %/°C -0.48 %/°C -0.48 %/°C -0.48 %/°C -0.48 %/°CTemp. coefficient voltage -0.34 %/°C -0.34 %/°C -0.34 %/°C -0.34 %/°C -0.34 %/°CTemp. coefficient current 0.037 %/°C 0.037 %/°C 0.037 %/°C 0.037 %/°C 0.037 %/°COperating moduletemperature


Cells per module 72 pc. 72 pc. 72 pc. 72 pc. 72 pc.Cell type Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline siliconCell dimensions (L / W) 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mmConnection Radox cables 4 mm²

with Radox solarconnectors

Radox cables 4 mm²with Radox solarconnectors





35 mm1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

Weight 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed.

2, protection class II, CEmark

IEC 61730, IEC 61215 ed.2, protection class II, CEmark




Art. No. 0101166 0101167 0101168 0101169 0101170

Model Suntech STP175S-24/AdBlack Mono

Suntech STP180S-24/AdBlack Mono

Suntech PLUTO195-AdeMono



Nominal power 175 W +5 W, -0 W 180 W +5 W, -0 W 195 W +5 W, -0 W 200 W +5 W, -0 W 205 W +5 W, -0 WMax. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 35.8 V 36.0 V 37.6 V 37.9 V 38.1 VOperating current 4.90 A 5.00 A 5.19 A 5.28 A 5.38 AOpen circuit voltage 44.7 V 44.8 V 45.4 V 45.7 V 45.8 VShort circuit current 5.23 A 5.29 A 5.52 A 5.62 A 5.73 ATemp. coefficient power -0.48 %/°C -0.48 %/°C -0.38 %/°C -0.38 %/°C -0.38 %/°CTemp. coefficient voltage -0.34 %/°C -0.34 %/°C -0.29 %/°C -0.29 %/°C -0.29 %/°CTemp. coefficient current 0.037 %/°C 0.037 %/°C 0.046 %/°C 0.046 %/°C 0.046 %/°COperating moduletemperature


Cells per module 72 pc. 72 pc. 72 pc. 72 pc. 72 pc.Cell type Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline silicon Monocrystalline siliconCell dimensions (L / W) 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mm 125 mm / 125 mmConnection Radox cables 4 mm²

with Radox solarconnectors






35 mm1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

1580 mm / 808 mm /35 mm

Weight 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.) 15.5 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 yearsProduct warranty 5 years 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed.

2, protection class II, CEmark








...................................................................................................................................................................


35

Suntech PolyFeaturing polycrystalline 6" cells

EfficiencyInnovative cutting-edge technology lets Suntech Polymodules achieve great efficiency. The great reliabilitywith a guaranteed output tolerance of ±3% and theexcellent quality of the used components ensure per-manently great efficiency.

ApplicationsBe it as stand-alone systems or grid-connected, on theroof, the building exterior or on the ground, Suntech'sPoly modules can be used almost anywhere. The mod-ules have been designed for high wind and snow loadsand certified according to IEC 61215.

QualityDuring the manufacture of Suntech modules regularquality controls are carried out according to interna-tional standards. Manufacturing is certified accordingto ISO 9001:2000 (qualitymanagement system) and ISO14001:2004 (environmental management system).

Advantages in briefn Great efficiencyn Best reliabilityn Low output tolerancen Sturdy design

Due to their sturdy design, the Suntech modules are testedand approved for loads up to 5400 N/m².

All Suntech modules have a special connecting box, devel-oped in collaboration with the Swiss company Huber+Suh-ner.


36

Art. No. 0101171 0101172 0101173 0101174

Model Suntech STP190-18/Ud Poly Suntech STP200-18/Ud Poly Suntech STP210-18/Ud Poly Suntech STP220-20/Wd PolyNominal power 190 W +5 W, -0 W 200 W +5 W, -0 W 210 W +5 W, -0 W 220 W +5 W, -0 WMax. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 26.0 V 26.2 V 26.4 V 29.5 VOperating current 7.31 A 7.63 A 7.95 A 7.46 AOpen circuit voltage 33.0 V 33.4 V 33.6 V 36.6 VShort circuit current 7.89 A 8.12 A 8.33 A 8.05 ATemp. coefficient power -0.47 %/°C -0.47 %/°C -0.47 %/°C -0.47 %/°CTemp. coefficient voltage -0.34 %/°C -0.34 %/°C -0.34 %/°C -0.34 %/°CTemp. coefficient current 0.045 %/°C 0.045 %/°C 0.045 %/°C 0.045 %/°COperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C

Cells per module 54 pc. 54 pc. 54 pc. 60 pc.Cell type Polycrystalline silicon Polycrystalline silicon Polycrystalline silicon Polycrystalline siliconCell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection Radox cables 4 mm² with

Radox solar connectorsRadox cables 4 mm² withRadox solar connectors

Radox cables 4 mm² withRadox solar connectors


Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1482 mm / 992 mm / 35 mm 1482 mm / 992 mm / 35 mm 1482 mm / 992 mm / 35 mm 1665 mm / 991 mm / 50 mmWeight 16.8 kg (approx.) 16.8 kg (approx.) 16.8 kg (approx.) 22.5 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed. 2,

protection class II, CE markIEC 61730, IEC 61215 ed. 2,protection class II, CE mark

IEC 61730, IEC 61215 ed. 2,protection class II, CE mark


Art. No. 0101175 0101176 0101177 0101178

Model Suntech STP225-20/Wd Poly Suntech STP260-24/Vd Poly Suntech STP270-24/Vd Poly Suntech STP280-24/Vd PolyNominal power 225 W +5 W, -0 W 260 W +5 W, -0 W 270 W +5 W, -0 W 280 W +5 W, -0 WMax. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCOperating voltage 29.6 V 34.8 V 35.0 V 35.2 VOperating current 7.61 A 7.47 A 7.71 A 7.95 AOpen circuit voltage 36.7 V 44.0 V 44.5 V 44.8 VShort circuit current 8.15 A 8.09 A 8.20 A 8.33 ATemp. coefficient power -0.47 %/°C -0.47 %/°C -0.47 %/°C -0.47 %/°CTemp. coefficient voltage -0.34 %/°C -0.34 %/°C -0.34 %/°C -0.34 %/°CTemp. coefficient current 0.045 %/°C 0.045 %/°C 0.045 %/°C 0.045 %/°COperating moduletemperature

-40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °C

Cells per module 60 pc. 72 pc. 72 pc. 72 pc.Cell type Polycrystalline silicon Polycrystalline silicon Polycrystalline silicon Polycrystalline siliconCell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mm 156 mm / 156 mmConnection Radox cables 4 mm² with

Radox solar connectorsRadox cables 4 mm² withRadox solar connectors



Mounting frame Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (L / W / H) 1665 mm / 991 mm / 50 mm 1956 mm / 992 mm / 50 mm 1956 mm / 992 mm / 50 mm 1956 mm / 992 mm / 50 mmWeight 22.5 kg (approx.) 27.0 kg (approx.) 27.0 kg (approx.) 27.0 kg (approx.)Max. load 5400 N/m² 5400 N/m² 5400 N/m² 5400 N/m²Performance warranty * 12 / 25 years 12 / 25 years 12 / 25 years 12 / 25 yearsProduct warranty 5 years 5 years 5 years 5 yearsNorms IEC 61730, IEC 61215 ed. 2,

protection class II, CE markIEC 61730, IEC 61215 ed. 2,protection class II, CE mark






...................................................................................................................................................................


37

Frameless high-efficiency photovoltaic laminates

Advanced technologyThanks to Kyocera's advanced cell processing technol-ogy, intensive research and automated productionfacilities they are able to produce a highly efficientpolycrystalline photovoltaic module.

High efficiencyThe embedded Kyocera high-performance solar cellswith the basic measurement 15.6 x 15.6 cm achieve anefficiency of over 16 % and guarantee an extremelyhigh annual energy output of the photovoltaic plant.

High-quality and reliabilityThe frameless modules do not require energy for thealuminium frames and thus ensure a further reductionin production energy. The cells are encapsulatedbetween a non-reflecting, tempered glass cover andan EVA pottant with a PVF back sheet. Sealed on the

back with PET film, the laminates promise a durable,high-quality roof surfacewith little need for repair andmaintenance. The distance between the cells and themodule edge is a little wider than that of framedmodules.The back of the junction box is equipped with bypassdiodes that eliminate the risk of the individual solarcells overheating (hot spot effect). The solar cablesensure flexible installation in the junction box.Kyocera manufactures all components in its own man-ufacturing plants – without the acquisition of semifinished products – for a constantly high quality of itsproducts.

Range of applicationn Grid-coupled systemsn Facade systemsn In-roof systems (e.g. Solrif)

Due to their frameless design, the modules can easily bemounted in facade or in-roof systems. The module is pro-tected from the most severe environmental conditions.

The ISES SolarCarpot system includes 108 FLmodules with anoutput of 14.04 kWp. Thanks to the frameless modules, thissystem does not require conventional roof cladding.

...................................................................................................................................................................SOLAR MODULES Frameless Modules...................................................................................................................................................................

38

Art. No. 0101105

Model FD135GH-2PNominal power 135 W ±5 %Max. system voltage 1000 VOperating voltage 17.7 VOperating current 7.63 AOpen circuit voltage 22.1 VShort circuit current 8.37 ATemp. coefficient voltage -0.8 x 10⁻¹ V/°CTemp. coefficient current 5.02 x 10⁻³ A/°CNOCT 47.9 °CCells per module 36 pc.Cell dimensions 156 x 156 mmCell connection 3 Bus BarConnection MC PV-KBT3 / MC PV-KST3, cables, 840 (-) / 840 (+) mmDimensions (L / W / H) * 1499 mm / 708 mm / 5 mmWeight 10.9 kgMax. load 2400 N/m²Performance warranty ** 10 yearsProduct warranty 5 yearsNorms IEC 61730, IEC 61215 ed. 2, protection class II, TÜVdotCOM-ID: 0000023420

* - The connection box at the back of each module protrudes the height of module. At this point the module has a height of 25 mm (FD135GH-2P).

** - Manufacturer's performance warranty: 10 years on 90 % and, in combination with Solrif, 20 years on 80 % of the minimal nominal power understandard testing conditions (STC)


...................................................................................................................................................................Frameless Modules SOLAR MODULES

...................................................................................................................................................................


39

Grid-connected InvertersLeading grid-connected inverters of our range safeguardmaximum energy yields – be it string inverters or centralinverters with maximum efficiency.

TRITEC BY DANFOSS

KACO

TRITEC BY SMA

SMA41

Danfoss UniLynx – The first inverters with powermodulesDanfoss UniLynx inverters are availablewith outputs of1.8 kW, 3.0 kW, 3.6 kWor 5.4 kWand equippedwith anintegrated mechanical DC disconnector. All invertershave an easy-to-use LC display and are suitable foroutdoor use.

Optimised for the use of solar modules with5" and 6" cellsThe inverters optionally have two input voltageranges: the high voltage range (HV) is suitable formodules with 5" cells; the medium range (MV) is idealfor 6" cells. These two special voltage ranges preventoutput losses through optimal adjustment of the stringvoltages to the operating area of the inverters.

Power module and separate connectioncompartmentAt the heart of these inverters are power modules:compact power semiconductors which replace the pre-viously used discrete power semiconductors. The HF-transformer technology separates the DC-side galvanicfrom the public AC-grid. The inverters have a connec-

tion compartment that is separate from the elec-tronics, which offers greatest possible security for theinstallation as well as the electronics.

Communication and accessoriesThe electrical measurements of the inverters – e.g.power course, energy yield, current, voltage and fre-quency – can be gathered, saved and evaluated usingoptional dataloggers (e.g. Solar-Log). All inverters areequippedwith aRS485-interface and are compatible toseveral datalogger manufacturers.

Features and innovationsn First inverters with power modulesn RS485 communication networkn Choice between independentMPP trackers (greatestpossible flexibility) andMaster-Slave operation (bestefficiency)

n International inverter for 16 countriesn Integrated DC-switch as a standard featuren Ride Through – even during massive power failures,the inverter continues to supply electricity

The internationally flexible Danfoss UniLynx inverters withintegrated HF transformer, DC switch and RS485 communi-cation interface.

Due to the use of power modules, the heat generated isoptimally dissipated – the cooler the inverter, the longer itsexpected life.

...................................................................................................................................................................GRID-CONNECTED INVERTERS Single-phased...................................................................................................................................................................

42

Art. No. 0201194 0201195 0201196 0201197

Model Danfoss ULX 1800 MV(outdoor)

Danfoss ULX 1800 HV(outdoor)

Danfoss ULX 3000 MV(outdoor)


Max. recommended PV systempower

1950 W 1950 W 3200 W 3200 W

Max. DC output 1950 W 1950 W 3200 W 3200 WMax. input current 10 A 7 A 2 x 10 A 2 x 7 AMax. input voltage * 450 / 410 V 600 / 550 V 450 / 410 V 600 / 550 VMPPT range 180 - 350 V 260 - 500 V 180 - 350 V 260 - 500 VOperation modes One MPP tracker One MPP tracker Two independent MPP

trackers or Master-Slave withone MPP tracker

Two independent MPPtrackers or Master-Slave withone MPP tracker

Independent MPPT trackers 1 pc. 1 pc. 2 pc. 2 pc.Max. output power 1800 W 1800 W 3000 W 3000 WNominal output power 1650 W 1650 W 2750 W 2750 WOutput voltage 230 V ±0.15 % 230 V ±0.15 % 230 V ±0.15 % 230 V ±0.15 %Max. output current 8.0 A 8.0 A 13.0 A 13.0 ANominal output current 7.2 A 7.2 A 12.0 A 12.0 AStart-up power level 20 W 20 W 20 W 20 WStand-by power consumption 8 W 8 W 8 W 8 WMax. efficiency 93.7 % 93.7 % 94.2 % 94.2 %Euro efficiency 91.6 % 91.6 % 92.9 % 92.9 %Operating temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRel. humidity 0 - 95 % 0 - 95 % 0 - 95 % 0 - 95 %Protection mode IP54 IP54 IP54 IP54Circuit type High frequency transformer,

single-phasedHigh frequency transformer,single-phased

High frequency transformer,single-phased


Power factor (P > 20 %) 0.97 0.97 0.97 0.97Harmonic distortion < 5 % < 5 % < 5 % < 5 %Galvanic safety class Class I Class I Class I Class ISurge protection AC + DC Integrated Integrated Integrated IntegratedDC load disconnector Integrated Integrated Integrated IntegratedReverse-polarity protection Integrated Integrated Integrated IntegratedData communication RS485 interface, for the

connection of optionaldatalogger

RS485 interface, for theconnection of optionaldatalogger



Connection MC-PV4 MC-PV4 MC-PV4 MC-PV4Dimensions (W / H / D) ** 489 mm / 434 mm / 192 mm 489 mm / 434 mm / 192 mm 618 mm / 434 mm / 192 mm 618 mm / 434 mm / 192 mmWeight 17 kg 17 kg 20 kg 20 kgWarranty *** 5 years 5 years 5 years 5 yearsNorms 73/23/EC, 2004/108/EC, EN

50178, EN 61000-6-1, EN61000-6-2, EN 61000-4-13-14-28, EN 60146-1, EN 61000-6-3,EN 61000-6-4, EN 61000-3-2-3,DIN VDE 0126-1-1, IEC 61727,EN 50160

73/23/EC, 2004/108/EC, EN50178, EN 61000-6-1, EN61000-6-2, EN 61000-4-13-14-28, EN 60146-1, EN 61000-6-3,EN 61000-6-4, EN 61000-3-2-3,DIN VDE 0126-1-1, IEC 61727,EN 50160



Continued on next page

...................................................................................................................................................................Single-phased GRID-CONNECTED INVERTERS

...................................................................................................................................................................


43

Art. No. 0201198 0201199 0201200 0201201

Model Danfoss ULX 3600 MV(outdoor)


Danfoss ULX 5400 MV(outdoor)


Max. recommended PV systempower

3900 W 3900 W 5400 W 5400 W

Max. DC output 3900 W 3900 W 5850 W 5850 WMax. input current 2 x 10 A 2 x 7 A 3 x 10 A 3 x 7 AMax. input voltage * 450 / 410 V 600 / 550 V 450 / 410 V 600 / 550 VMPPT range 180 - 350 V 260 - 500 V 180 - 350 V 260 - 500 VOperation modes Two independent MPP

trackers or Master-Slave withone MPP tracker

Two independent MPPtrackers or Master-Slave withone MPP tracker

Three independent MPPtrackers or Master-Slave withone MPP tracker

Three independent MPPtrackers or Master-Slave withone MPP tracker

Independent MPPT trackers 2 pc. 2 pc. 3 pc. 3 pc.Max. output power 3600 W 3600 W 5000 / 5400 W 5000 / 5400 WNominal output power 3300 W 3300 W 4600 W 4600 WOutput voltage 230 V ±0.15 % 230 V ±0.15 % 230 V ±0.15 % 230 V ±0.15 %Max. output current 15.5 A 15.5 A 23.0 A 23.0 ANominal output current 14.5 A 14.5 A 20.0 A 20.0 AStart-up power level 20 W 20 W 20 W 20 WStand-by power consumption 8 W 8 W 8 W 8 WMax. efficiency 94.2 % 94.2 % 94.3 % 94.3 %Euro efficiency 93.4 % 93.4 % 93.4 % 93.4 %Operating temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRel. humidity 0 - 95 % 0 - 95 % 0 - 95 % 0 - 95 %Protection mode IP54 IP54 IP54 IP54Circuit type High frequency transformer,

single-phasedHigh frequency transformer,single-phased



Power factor (P > 20 %) 0.97 0.97 0.97 0.97Harmonic distortion < 5 % < 5 % < 5 % < 5 %Galvanic safety class Class I Class I Class I Class ISurge protection AC + DC Integrated Integrated Integrated IntegratedDC load disconnector Integrated Integrated Integrated IntegratedReverse-polarity protection Integrated Integrated Integrated IntegratedData communication RS485 interface, for the

connection of optionaldatalogger




Connection MC-PV4 MC-PV4 MC-PV4 MC-PV4Dimensions (W / H / D) ** 618 mm / 434 mm / 192 mm 618 mm / 434 mm / 192 mm 747 mm / 434 mm / 192 mm 747 mm / 434 mm / 192 mmWeight 20 kg 20 kg 23 kg 23 kgWarranty *** 5 years 5 years 5 years 5 yearsNorms 73/23/EC, 2004/108/EC, EN

50178, EN 61000-6-1, EN61000-6-2, EN 61000-4-13-14-28, EN 60146-1, EN 61000-6-3,EN 61000-6-4, EN 61000-3-2-3,DIN VDE 0126-1-1, IEC 61727,EN 50160




* - Reduced max. input voltage in master-slave operation

** - Incl. wall fixing

*** - Can optionally be extended to 10 years



44

Kaco Powador 02 SeriesGreat flexibility, simple installation

New current sensorThe new current sensor of the Kaco Powador 02 seriesenables more precise control and better MPP tracking.The inverters with electrical isolation satisfy with theireffortless installation, highest efficiency aswell as opti-mal operation by means of thin-film modules.

Effortless installationThe connections are situated on their own PCB withinthe casing and can be connected easily. For a faster andeasier wiring, all communication connections aremounted separately on a PCB. A DC circuit breaker isintegrated into the device.

Highest efficiencyWith an efficiency of 96 %, the inverters of the KacoPowador 02 series are among the top-rated of theirclass. Due to the electrical isolation, the devices can beinstalled even in places that would be impossible fordevices without transformers. The wide input voltagerange makes the devices extremely flexible.

Advantages in briefn New current sensorn Electrical isolationn Simple installationn High efficiencyn Simple wiringn Optimal for thin-film modulesn Display of earthing status of the PV generator

The integrated transformer of the Powador 02 series en-sures electrical isolation from the mains, which allows theuse of thin-film modules without any problems.

With an efficiency of 96 %, the inverters of the Kaco Powa-dor 02 series are among the top-rated of their class.


46

Art. No. 0201124 0201126 0201128 0201130 0201132

Model Kaco Powador 2002 INT Kaco Powador 3002 INT Kaco Powador 4202 INT Kaco Powador 5002 INT Kaco Powador 6002 INTMPP voltage range 125 - 510 V 200 - 510 V 200 - 510 V 200 - 510 V 200 - 510 VOpen circuit voltage 600 V 600 V 600 V 600 V 600 VMax. input current 14.3 A 13.5 A 18.5 A 22.4 A 26.5 ANominal output 1650 W 2500 W 3500 W 4200 W 4600 WOutput voltage 184 - 264 V 184 - 264 V 184 - 264 V 184 - 264 V 184 - 264 VPower factor cos phi 1 1 1 1 1Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 HzHarmonic distortion < 3 % < 3 % < 3 % < 3 % < 3 %Max. efficiency 95.9 % 96.0 % 95.9 % 95.9 % 95.9 %Euro efficiency 95.3 % 95.4 % 95.1 % 95.3 % 95.3 %Night-time consumption 0.4 W 0.4 W 0.4 W 0.4 W 0.4 WAmbient temperature -20 to +60 °C -20 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CHeat dissipation Free convection / no fan Free convection / no fan Free convection / no fan Fan FanProtection mode IP54 IP54 IP54 IP54 IP54Circuit type Self-controlled, electri-

cally isolated, HFtransformer

Self-controlled, electri-cally isolated, HFtransformer




DC load disconnector Integrated Integrated Integrated Integrated IntegratedGrid monitoring Automatic disconnect

switch DIN VDE 0126-1-1:2006-02

Automatic disconnectswitch DIN VDE 0126-1-1:2006-02




Display Two-line LC display, LED Two-line LC display, LED Two-line LC display, LED Two-line LC display, LED Two-line LC display, LEDConnection PCB clip up to max.

6 mm²PCB clip up to max.6 mm²

PCB clip up to max.6 mm²



Casing Aluminium Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 450 mm / 340 mm /

200 mm500 mm / 340 mm /200 mm

600 mm / 340 mm /240 mm

600 mm / 340 mm /240 mm

600 mm / 340 mm /240 mm

Weight 12 kg 20 kg 26 kg 28 kg 28 kgWarranty * 7 years 7 years 7 years 7 years 7 yearsNorms DIN VDE 0126-1-1:2006-

02, EN 50178, DIN EN50178, IEC 62103, RALseal of approval (RALGZ 966)

DIN VDE 0126-1-1:2006-02, EN 50178, DIN EN50178, IEC 62103, RALseal of approval (RALGZ 966)




* - Can optionally be extended to 11 / 15 / 20 / 25 years


...................................................................................................................................................................


47

Kaco Powador xi SeriesInverters without transformers

Higher efficiencyWithout transformers, the inverters of the Kaco xiseries achieve optimal efficiency. As a specialist forinverters without transformers, Kaco has equipped alldevices of the xi series with a full bridge and omittedthe boost converters. The self-controlled devices emu-late the sinus voltage curve of the public power gridusing a H4 bridge. Prerequisite for using the xi seriesinverters is an input voltage higher than the grid peakvoltage.

Simple installationWith a MPP range of 350 to 600 V and an off-loadvoltage of 800 V the conditions for a simple systemdimensioning are ideal. The devices are connected tothe grid by screw terminals. The redundant 3-phasemonitoring, including an AC/DC sensitive residual-cur-

rent-operated protective device, facilitates the gridconnection, even in the case of systems with severalinverters.

Long service lifeAll inverters operate up to outputs of 8 kW with silentand purely passive cooling. The lost heat is optimallydissipated by the cooling element on the back. Thiscooling without mechanical fans reduces error sourcesand thus achieves a long life-cycle of the devices.

100 % feed-inThe Kaco Powador 6650xi was specifically developedfor applications with connections limits of 20 kW. Dueto the 100 % symmetrical feed-in of 20 kW, not onewatt of power is wasted, not even in Spain, Italy orGreece.

The Powador 2500xi to 4500xi without transformers can besingle-phase connected individually, due to their nominaloutput.

The single-phase Powador 5000xi – 8000xi have a nominaloutput of more than 5 kW; for this reason the unbalancedload between feed-in phases should be considered duringthe dimensioning.


48

Art. No. 0201134 0201136 0201138 0201140 0201142

Model Kaco Powador 2500xiDCS INT

Kaco Powador 3600xiDCS INT




MPP voltage range 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 VOpen circuit voltage 800 V 800 V 800 V 800 V 800 VMax. input current 8.6 A 12.0 A 14.5 A 15.2 A 18.0 ANominal output 2600 W 3600 W 4400 W 4600 W 5500 WOutput voltage 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 VPower factor cos phi 1 1 1 1 1Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 HzHarmonic distortion < 3 % < 3 % < 3 % < 3 % < 3 %Max. efficiency 96.4 % 96.4 % 96.4 % 96.3 % 96.3 %Euro efficiency 95.8 % 95.8 % 95.8 % 95.3 % 95.3 %Night-time consumption 0 W 0 W 0 W 0 W 0 WAmbient temperature -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °CHeat dissipation Free convection / no fan Free convection / no fan Free convection / no fan Free convection / no fan Free convection / no fanProtection mode IP54 IP54 IP54 IP54 IP54Circuit type Self-controlled, trans-

formerlessSelf-controlled, trans-formerless

Self-controlled, trans-formerless



DC load disconnector Integrated Integrated Integrated Integrated IntegratedGrid monitoring Redundant 3-phase

monitoring acc. to VDE0126-1-1:2006-02,VDEW-compliant

Redundant 3-phasemonitoring acc. to VDE0126-1-1:2006-02,VDEW-compliant




Display Two-line LC display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayConnection PCB clip up to max.






200 mm550 mm / 340 mm /220 mm

550 mm / 340 mm /220 mm

600 mm / 340 mm /220 mm

600 mm / 340 mm /220 mm









...................................................................................................................................................................


49

Art. No. 0201144 0201146 0201148 0201150 0201152

Model Kaco Powador 6400xiDCS INT




Kaco Powador 4000supreme INT

MPP voltage range 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 V 350 - 510 VOpen circuit voltage 800 V 800 V 800 V 800 V 600 VMax. input current 19.0 A 19.7 A 21.4 A 24.0 A 14.5 ANominal output 6400 W 6650 W 7200 W 8000 W 4400 WOutput voltage 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 VPower factor cos phi 1 1 1 1 1Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 HzHarmonic distortion < 3 % < 3 % < 3 % < 3 % < 3 %Max. efficiency 96.5 % 96.5 % 96.5 % 96.5 % 97.0 %Euro efficiency 95.8 % 95.8 % 95.8 % 95.8 % 96.6 %Night-time consumption 0 W 0 W 0 W 0 W 0 WAmbient temperature -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °CHeat dissipation Free convection / no fan Free convection / no fan Free convection / no fan Free convection / no fan Free convection / no fanProtection mode IP54 IP54 IP54 IP54 IP54Circuit type Self-controlled, trans-





DC load disconnector Integrated Integrated Integrated Integrated IntegratedGrid monitoring Redundant 3-phase

monitoring acc. to VDE0126-1-1:2006-02,VDEW-compliant





Display Two-line LC display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayConnection PCB clip up to max.






220 mm810 mm / 340 mm /220 mm

810 mm / 340 mm /220 mm

810 mm / 340 mm /220 mm

550 mm / 340 mm /220 mm










50

SMA Sunny Boy

Flexible pioneersAs the first manufacturer of an inverter suitable formass production, SMA has concentrated on repeatedlydiversifying the implementation possibilities with newtechnologies, so that today any system constellationfrom 400 Wp and upwards can be optimally realizedwith an SMA inverter. SMAdevelops andmanufacturesthe inverters for a life span of more than 20 years andproduces exclusively at the company headquarters inNiestetal, near Kassel, Germany. The new, elegantdesign was developed in a joint effort by TRITEC andSMA.

The choice is yours: with or without trans-formerSMA inverters are available with or without transform-ers. While the transformerless concept offers the abil-ity to use such latest technologies as H5 topology and isalso extremely lightweight, the transformer device isthe first choice for those who want galvanic isolation.

In addition, transformer-based devices offer the bestpossibilities for combination with thinfilm modules.

The new generation: globally communica-tiveJust radio where previously cables were required –

Bluetooth makes it possible. The Sunny Boys of thenew generation (SB 4000TL-20, SB 5000TL-20) are pro-vided with this innovative radio technology. Set forinternational action: the new Sunny Boy speaks Ger-man, English, French, Spanish, Italian, and Greek.

Easy installation of the new Sunny BoyIn addition to its completely new installation and wir-ing concept, the new Sunny Boy is not only 20 percentlighter, it is also clearly reduced in volume. Installationin a flash on a top hat rail or wall fixture is thusguaranteed. The concept is roundedoff bywiringwith-out tools due to special SMA spring-type clamps andeffective anti-theft device.

Globally the most successful inverters of the Sunny Boy ser-ies, now in the new TRITEC design.

The new generation of the Sunny Boy series: with Bluetoothand flexible country settings as standard.


52

Art. No. 0201110 0201017 0201018 0201019 0201020

Model SMA SB 1200 SMA SB 1700 SMA SB 2100TL SMA SB 2500 SMA SB 3000MPP voltage range 100 - 320 V 139 - 320 V 125 - 600 V 224 - 480 V 268 - 480 VOpen circuit voltage 400 V 400 V 600 V 600 V 600 VMax. input current 12.6 A 12 A 11 A 12 A 12 ANominal output 1200 W 1550 W 1950 W 2300 W 2750 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi 1 1 1 1 > 0.98Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 % < 4 %Max. efficiency 92.1 % 93.5 % 96.0 % 94.1 % 95.0 %Euro efficiency 90.7 % 91.8 % 95.2 % 93.2 % 93.6 %Night-time consumption 0.10 W 0.10 W 0.25 W 0.25 W 0.25 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no

condensation0 to 98 %, nocondensation

0 to 98 %, nocondensation



Heat dissipation Convection Convection Convection Convection ConvectionProtection mode IP65 IP65 IP65 IP65 IP65Circuit type Low frequency

transformer, single-phased

Low frequencytransformer, single-phased

Transformerless, single-phased



Grid monitoring ENS, according to VDE0126

ENS, according to VDE0126




Fault current monitoring Fault currentmonitoring accordingto VDE 0126

Fault currentmonitoring accordingto VDE 0126




Display Two-line LC display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayCasing Aluminium Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 434 mm / 295 mm /

214 mm434 mm / 295 mm /214 mm

434 mm / 295 mm /214 mm

434 mm / 295 mm /214 mm

434 mm / 295 mm /214 mm

Weight 23 kg 25 kg 16 kg 30 kg 31 kgWarranty * 5 years 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126

Art. No. 0201021 0201023 0201026 0201027

Model SMA SB 3300 SMA SB 3800 SMA SB 3000TL-20 SMA SB 4000TL-20MPP voltage range 200 - 400 V 200 - 400 V 125 - 440 V 125 - 440 VOpen circuit voltage 500 V 500 V 550 V 550 VMax. input current 20 A 20 A 1 x 17 A 2 x 15 ANominal output 3300 W 3800 W 3000 W 4000 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi > 0.98 > 0.98 1 1Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 %Max. efficiency 95.2 % 95.6 % 97.0 % 97.0 %Euro efficiency 94.4 % 94.7 % 96.0 % 96.2 %Night-time consumption 0.25 W 0.25 W 0.20 W 0.20 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 95 %, no condensation 0 to 95 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensationHeat dissipation OptiCool fan OptiCool fan OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65Circuit type Low frequency transformer,

single-phasedLow frequency transformer,single-phased



Grid monitoring ENS, according to VDE 0126 ENS, according to VDE 0126 SMA Grid guard 2 SMA Grid guard 2Fault current monitoring Fault current monitoring

according to VDE 0126Fault current monitoringaccording to VDE 0126

Fault current monitoringaccording to VDE 0126


Display Two-line LC display Two-line LC display Graphic LC display Graphic LC displayCasing Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 450 mm / 352 mm / 236 mm 450 mm / 352 mm / 236 mm 470 mm / 445 mm / 180 mm 470 mm / 445 mm / 180 mmWeight 41 kg 41 kg 25 kg 25 kgWarranty * 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126



...................................................................................................................................................................


53

Art. No. 0201028 0201118 0201119 0201120

Model SMA SB 5000TL-20 SMA SB 2000HF SMA SB 2500HF SMA SB 3000HFMPP voltage range 125 - 440 V 175 - 560 V 175 - 560 V 210 - 560 VOpen circuit voltage 550 V 700 V 700 V 700 VMax. input current 2 x 15 A 12 A 15 A 15 ANominal output 4600 W 2000 W 2500 W 3000 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi 1 1 1 1Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 %Max. efficiency 97.0 % 96.0 % 96.0 % 96.0 %Euro efficiency 96.5 % 95.0 % 95.0 % 95.0 %Night-time consumption 0.20 W 0.25 W 0.25 W 0.25 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensationHeat dissipation OptiCool fan - OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65Circuit type Transformerless, single-

phasedHigh frequency transformer,single-phased



Grid monitoring SMA Grid guard 2 ENS, according to VDE 0126 ENS, according to VDE 0126 ENS, according to VDE 0126Fault current monitoring Fault current monitoring




Display Graphic LC display Graphic LC display Graphic LC display Graphic LC displayCasing Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 470 mm / 445 mm / 180 mm 348 mm / 580 mm / 145 mm 348 mm / 580 mm / 145 mm 348 mm / 580 mm / 145 mmWeight 25 kg < 18 kg < 18 kg < 18 kgWarranty * 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126




54

SMA Sunny Mini Central

Innovative technologyAs the first inverter with the SMA-developed H5 top-ology, the transformerless Sunny Mini Central canoperate at an efficiency level of over 98 %. The trans-formerless Sunny Mini Central hence offers the short-est amortization timeavailable today. The inverter alsoincludes Power Balancer, an intelligent unbalancedload management system that guarantees optimalcompliance with power utility company guidelines.

Optimal error safetyWith the Electronic Solar Switch DC integrated circuitbreaker and the SMAGrid guard 2 active grid-monitor-ing system, the Sunny Mini Central is equipped withthe most advanced safety features for all work oneither the solar power system or the AC voltage grid.By wiring fewer strings per inverter, additional stringmonitoring is no longer necessary. Defects can beimmediately identified on the integrated display ofeach Sunny Mini Central.

Dual conceptThe Sunny Mini Central is available with or without atransformer. While the transformerless concept offersthe ability to use the latest technologies like H5 top-ology and is also extremely light weight, the trans-former device is the first choice for those who wantgalvanic isolation and an extended temperature rangeof up to 60°C in ambient temperature. Regardless ofwhich type is used – you can choose from a wide rangeof different system monitoring components that offeryou greater investment security.

Advantages in briefn The best price-performance ration Elegant TRITEC designn Highest efficiency worldwiden Protection class IP65n SMA OptiCooln Electronic Solar Switch ESS

The established SMA Sunny Mini Central series in the attrac-tive TRITEC design.

None pay for themselves as quickly as the efficiency recordholder SMA SMC 8000TL.


56

Art. No. 0201086 0201029 0201030 0201031 0201032

Model SMA SMC 4600A SMA SMC 5000A SMA SMC 6000A SMA SMC 6000TL SMA SMC 7000HVMPP voltage range 246 - 480 V 246 - 480 V 246 - 480 V 333 - 500 V 335 - 560 VOpen circuit voltage 600 V 600 V 600 V 700 V 800 VMax. input current 26 A 26 A 26 A 19 A 31 ANominal output 4600 W 5000 W 6000 W 6000 W 6650 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi 1 1 1 1 1Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 % < 4 %Max. efficiency 96.1 % 96.1 % 96.1 % 98.0 % 96.1 %Euro efficiency 95.2 % 95.2 % 95.2 % 97.7 % 95.3 %Night-time consumption 0.25 W 0.25 W 0.25 W 0.25 W 0.25 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no

condensation0 to 98 %, nocondensation




Heat dissipation OptiCool fan OptiCool fan OptiCool fan OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65 IP65Circuit type Low frequency

transformer, single-phased





Grid monitoring SMA Grid guard 2 SMA Grid guard 2 SMA Grid guard 2 SMA Grid guard 2 SMA Grid guard 2Fault current monitoring Fault current

monitoring accordingto VDE 0126





Display Two-line LC display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayCasing Aluminium Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 468 mm / 613 mm /

242 mm468 mm / 613 mm /242 mm

468 mm / 613 mm /242 mm

468 mm / 613 mm /242 mm

468 mm / 613 mm /242 mm

Weight 62 kg 62 kg 63 kg 31 kg 65 kgWarranty * 5 years 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126

Art. No. 0201033 0201034 0201035 0201036

Model SMA SMC 7000TL SMA SMC 8000TL SMA SMC 9000TL SMA SMC 10000TLMPP voltage range 333 - 500 V 333 - 500 V 333 - 500 V 333 - 500 VOpen circuit voltage 700 V 700 V 700 V 700 VMax. input current 22 A 25 A 29 A 32 ANominal output 7000 W 8000 W 9000 W 10000 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi 1 1 1 1Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 %Max. efficiency 98.0 % 98.0 % 98.0 % 98.0 %Euro efficiency 97.7 % 97.7 % 97.5 % 97.5 %Night-time consumption 0.25 W 0.25 W 0.25 W 0.25 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 95 %, no condensationHeat dissipation OptiCool fan OptiCool fan OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65Circuit type Transformerless, single-

phasedTransformerless, single-phased



Grid monitoring SMA Grid guard 2 SMA Grid guard 2 SMA Grid guard 2 SMA Grid guard 2Fault current monitoring Fault current monitoring




Display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayCasing Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mmWeight 32 kg 33 kg 40 kg 40 kgWarranty * 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126



...................................................................................................................................................................


57

Art. No. 0201037 0201107 0201108 0201109

Model SMA SMC 11000TL SMA SMC 9000TLRP-10 SMA SMC 10000TLRP-10 SMA SMC 11000TLRP-10MPP voltage range 333 - 500 V 333 - 500 V 333 - 500 V 333 - 500 VOpen circuit voltage 700 V 700 V 700 V 700 VMax. input current 35 A 28 A 31 A 34 ANominal output 11000 W 9000 W 10000 W 11000 WOutput voltage 180 - 260 V 180 - 260 V 180 - 260 V 180 - 260 VPower factor cos phi > 0.98 0.8 (leading) - 0.8 (lagging) 0.8 (leading) - 0.8 (lagging) 0.8 (leading) - 0.8 (lagging)Frequency 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 Hz 50 Hz ±4.5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 %Max. efficiency 98.0 % 97.7 % 97.7 % 97.7 %Euro efficiency 97.5 % 97.5 % 97.5 % 97.5 %Night-time consumption 0.25 W 0.25 W 0.25 W 0.25 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 95 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 95 %, no condensationHeat dissipation OptiCool fan OptiCool fan OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65Circuit type Transformerless, single-

phasedTransformerless, single-phased



Grid monitoring SMA Grid guard 2 SMA Grid guard SMA Grid guard SMA Grid guardFault current monitoring Fault current monitoring




Display Two-line LC display Two-line LC display Two-line LC display Two-line LC displayCasing Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mm 468 mm / 613 mm / 242 mmWeight 40 kg 35 kg 35 kg 35 kgWarranty * 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126 CE mark, VDE 0126




58

Danfoss TripleLynx – The most versatile inverteron the marketThe three-phase Danfoss TripleLynx inverters are avail-able with outputs of 10, 12.5 and 15 kW and are suit-able for outdoor use, weighing a mere 35 kg. Due totheir ease-of-use, geared to economic applications,and their wide range of operating specifications, theseinverters are the most versatile on the market.

It's all there – wide range of operating spec-ificationsThe inverter has two or three independent stringinputs, an extensive operating field, and a three-phaseoutput, which makes it incredibly versatile. Thanks toits wide range of operating specifications, the invertercan be connected to a variety of modules each withdifferent string configurations.

High output due to effective MPP trackersand high efficiencyThree individualMPP controllers always ensure anopti-mal output of the system, irrespective of the differ-ences in size or the location of the PV modules. Theaccuracy of the MPP controllers was verified by theVienneseArsenal Research Institute,measuring an effi-

ciency of 99.9% of the MPP controller. With an effec-tiveness of 98%, this inverter positions itself at the topof the three-phase devices on the market.

Three-phase grid connectionA perfectly symmetrical three-phase power supplyrequires nothing more than an inverter. A three-phaseinverter ensures three-phase output at all times as wellas compliance with the rules for grid connection irre-spective of string fluctuations on the input side.

Features and innovationsn Up to three independent power inputsn Preprogrammed for 16 countriesn Integrated communication boardn Communication with RS485 and integrated modemn Alarm display for faultsn Integrated DC switchn Integrated cable lockn Integrated insulation monitoringn Separate connection compartmentn Service tool for ultra-easy maintenance

The transformerless Danfoss TripleLynx inverter series withthree-phase power supply and a sensational effectiveness of98 %.

The TripleLynx inverters are optionally available as the Plusmodel (incl. reactive power compensation) and the Promodel (incl. web server).

...................................................................................................................................................................GRID-CONNECTED INVERTERS Three-phased...................................................................................................................................................................

60

Art. No. 0201202 0201205 0201208 0201211

Model Danfoss TLX 10k (standard) Danfoss TLX 10k (plus) Danfoss TLX 10k (pro) Danfoss TLX 10k (plus pro)Max. recommended PV systempower

11800 W 11800 W 11800 W 11800 W

Max. DC output 10300 W 10300 W 10300 W 10300 WMax. input current 2 x 12 (24) A 2 x 12 (24) A 2 x 12 (24) A 2 x 12 (24) AMax. input voltage 1000 V 1000 V 1000 V 1000 VMPPT range 430 - 800 V 430 - 800 V 430 - 800 V 430 - 800 VIndependent MPPT trackers 2 pc. 2 pc. 2 pc. 2 pc.Max. output power 10000 W 10000 W 10000 W 10000 WNominal output power 10000 W 10000 W 10000 W 10000 WOutput voltage 3 x 230 V ±20 % 3 x 230 V ±20 % 3 x 230 V ±20 % 3 x 230 V ±20 %Max. output current 3 x 15.0 A 3 x 15.0 A 3 x 15.0 A 3 x 15.0 AStart-up power level 20 W 20 W 20 W 20 WStand-by power consumption 10 W 10 W 10 W 10 WMax. efficiency 98 % 98 % 98 % 98 %Euro efficiency > 97 % > 97 % > 97 % > 97 %Operating temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRel. humidity 0 - 95 % non condensing 0 - 95 % non condensing 0 - 95 % non condensing 0 - 95 % non condensingProtection mode IP54 IP54 IP54 IP54Circuit type Transformerless, three-phased Transformerless, three-phased Transformerless, three-phased Transformerless, three-phasedPower factor (P > 20 %) 0.97 0.97 0.97 0.97Harmonic distortion < 5 % < 5 % < 5 % < 5 %Galvanic safety class Class I Class I Class I Class ISurge protection AC + DC Integrated Integrated Integrated IntegratedDC load disconnector Integrated Integrated Integrated IntegratedReverse-polarity protection Integrated Integrated Integrated IntegratedData communication RS485 interface, Power Level

Adjustment, sensor inputs,optional: GSM modem, weblogger

RS485 interface, Power LevelAdjustment, sensor inputs,optional: GSM modem, weblogger



Reactive power - Reactive power settingprotection in display unit

- Reactive power settingprotection in display unit

Ethernet - - Ethernet serial and Star,software update from master,allocation of settings frommaster, web server

Ethernet serial and Star,software update from master,allocation of settings frommaster, web server

Connection MC-PV4 MC-PV4 MC-PV4 MC-PV4Dimensions (W / H / D) 700 mm / 525 mm / 250 mm 700 mm / 525 mm / 250 mm 700 mm / 525 mm / 250 mm 700 mm / 525 mm / 250 mmWeight 35 kg 35 kg 35 kg 35 kgWarranty * 5 years 5 years 5 years 5 yearsNorms 2006/95/EC, 2004/108/EC, EN

50178, EN 61000-6-1,EN61000-6-2, EN 61000-6-3,EN 61000-6-4, EN 61000-3-2/-3,DIN VDE 0126-1-1, IEC 61727,EN 50160

2006/95/EC, 2004/108/EC, EN50178, EN 61000-6-1,EN61000-6-2, EN 61000-6-3,EN 61000-6-4, EN 61000-3-2/-3,DIN VDE 0126-1-1, IEC 61727,EN 50160




...................................................................................................................................................................Three-phased GRID-CONNECTED INVERTERS

...................................................................................................................................................................


61

Art. No. 0201203 0201206 0201209 0201212

Model Danfoss TLX 12.5k (standard) Danfoss TLX 12.5k (plus) Danfoss TLX 12.5k (pro) Danfoss TLX 12.5k (plus pro)Max. recommended PV systempower

14700 W 14700 W 14700 W 14700 W


















62

Art. No. 0201204 0201207 0201210 0201213

Model Danfoss TLX 15k (standard) Danfoss TLX 15k (plus) Danfoss TLX 15k (pro) Danfoss TLX 15k (plus pro)Max. recommended PV systempower

17700 W 17700 W 17700 W 17700 W















* - Can optionally be extended to 10 years


...................................................................................................................................................................


63

Kaco Powador central invertersEfficient and reliable

Individual performanceWith generator outputs of 2 to 110 kW, the inverters ofthe Kaco Powador series cover an enormous perform-ance range completely. The ability of combining alldevices freely enables any project to be realised opti-mally and individually – from single-family houses tomegawatt solar parks.

Innovative technologyIn all inverters of the Powador series a patented MPPcontrol and innovative IGBT circuit breaker ensure highefficiency. For all devices without transformers, Kacohas always preferred the 3-phase voltage monitoringto the simple impedancemeasuring (ENS). The 3-phasemonitoring avoids unnecessary cut-offs, resulting inincreased feed-in current. The grid monitoring bymeans of the bi-directional safety interface (BiSi),which is used in all inverters with transformers, offersthe same advantages.

Greatest flexibilityThe used components, technology and the ability tocombine freely result in a very great flexibility for allusers. For instance, the Powador 5000xi can serve aphotovoltaic system of up to 6.8 kW or – with addi-tional devices – also other output classes, up to entiresolar power plants.

Advantages in briefn Generator output of 2 to 110 kWn Ability to combine all devicesn Patented MPP controln New IGBT circuit breakern 3-phase voltage monitoring for devices withouttransformers

n Grid monitoring by means of BiSi for devices withtransformers

n Optionally available for Kaco Powador 25000xi /30000xi / 33000xi: a park model (for solar parks) –with increased efficiency according to industrystandards

Kaco Powador 25000xi / 30000xi / 33000xi can help to realisePV power systems of 25 kW to the megawatt range.

The Kaco Powador Megawatt Station consists of three com-bined XP350-HV TL.


64

Art. No. 0201155 0201157 0201159 0201167 0201169

Model Kaco Powador 25000xiM INT

Kaco Powador 25000xiL INT

Kaco Powador 25000xiXL INT

Kaco Powador 30000xiM INT

Kaco Powador 30000xiL INT

MPP voltage range 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 VOpen circuit voltage 800 V 800 V 800 V 800 V 800 VMax. input current 3 x 27.4 A 3 x 27.4 A 3 x 27.4 A 3 x 32.8 A 3 x 32.8 ANominal output 25000 W 25000 W 25000 W 29900 W 29900 WOutput voltage 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 VPower factor cos phi 1 1 1 1 1Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 HzHarmonic distortion < 3 % < 3 % < 3 % < 3 % < 3 %Max. efficiency 96.5 % 96.5 % 96.5 % 96.5 % 96.5 %Euro efficiency 96.0 % 96.0 % 96.0 % 96.0 % 96.0 %Night-time consumption 7 W 7 W 7 W 7 W 7 WAmbient temperature -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °CHeat dissipation Forced cooling / speed-

controlled fan, max.600 m³/h

Forced cooling / speed-controlled fan, max.600 m³/h




Protection mode IP54 IP54 IP54 IP54 IP54Circuit type Self-controlled, trans-





Grid monitoring Redundant 3-phasemonitoring acc. to VDE0126-1-1:2006-02,VDEW-compliant





Display Lit four-line LC display Lit four-line LC display Lit four-line LC display Lit four-line LC display Lit four-line LC displayDC load disconnector Integrated Integrated Integrated Integrated IntegratedLine fuses - 5 line fuses (12 A) 5 line fuses (12 A) - 5 line fuses (12 A)Surge protection - - Integrated - -Casing Sheet steel Sheet steel Sheet steel Sheet steel Sheet steelDimensions (W / H / D) 1460 mm / 835 mm /

340 mm1460 mm / 835 mm /340 mm

1460 mm / 835 mm /340 mm

1460 mm / 835 mm /340 mm

1460 mm / 835 mm /340 mm

Weight 190 kg 190 kg 190 kg 190 kg 190 kgWarranty * 7 years 7 years 7 years 7 years 7 yearsNorms EN 60950-1:2006, EN

50178:1997, EN 61000-6-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 61000-3-11:2000, EN 61000-3-12:2005, DIN VDE 0126-1-1:2006-02

EN 60950-1:2006, EN50178:1997, EN 61000-6-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 61000-3-11:2000, EN 61000-3-12:2005, DIN VDE 0126-1-1:2006-02






...................................................................................................................................................................


65

Art. No. 0201171 0201179 0201181 0201183

Model Kaco Powador 30000xi XL INT Kaco Powador 33000xi M INT Kaco Powador 33000xi L INT Kaco Powador 33000xi XL INTMPP voltage range 350 - 600 V 350 - 600 V 350 - 600 V 350 - 600 VOpen circuit voltage 800 V 800 V 800 V 800 VMax. input current 3 x 32.8 A 3 x 33.2 A 3 x 33.2 A 3 x 33.2 ANominal output 29900 W 33300 W 33300 W 33300 WOutput voltage 190 - 264 V 190 - 264 V 190 - 264 V 190 - 264 VPower factor cos phi 1 1 1 1Frequency 50 Hz 50 Hz 50 Hz 50 HzHarmonic distortion < 3 % < 3 % < 3 % < 3 %Max. efficiency 96.5 % 96.5 % 96.5 % 96.5 %Euro efficiency 96.0 % 96.0 % 96.0 % 96.0 %Night-time consumption 7 W 7 W 7 W 7 WAmbient temperature -20 to +60 °C -20 to +60 °C -20 to +60 °C -20 to +60 °CHeat dissipation Forced cooling / speed-

controlled fan, max. 600 m³/hForced cooling / speed-controlled fan, max. 600 m³/h

Forced cooling / speed-controlled fan, max. 600 m³/h

Forced cooling / speed-controlled fan, max. 600 m³/h

Protection mode IP54 IP54 IP54 IP54Circuit type Self-controlled, transformer-

lessSelf-controlled, transformer-less

Self-controlled, transformer-less

Self-controlled, transformer-less

Grid monitoring Redundant 3-phasemonitoring acc. to VDE 0126-1-1:2006-02, VDEW-compliant

Redundant 3-phasemonitoring acc. to VDE 0126-1-1:2006-02, VDEW-compliant



Display Lit four-line LC display Lit four-line LC display Lit four-line LC display Lit four-line LC displayDC load disconnector Integrated Integrated Integrated IntegratedLine fuses 5 line fuses (12 A) - 5 line fuses (12 A) 5 line fuses (12 A)Surge protection Integrated - - IntegratedCasing Sheet steel Sheet steel Sheet steel Sheet steelDimensions (W / H / D) 1460 mm / 835 mm / 340 mm 1460 mm / 835 mm / 340 mm 1460 mm / 835 mm / 340 mm 1460 mm / 835 mm / 340 mmWeight 190 kg 190 kg 190 kg 190 kgWarranty * 7 years 7 years 7 years 7 yearsNorms EN 60950-1:2006, EN

50178:1997, EN 61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-4:2007, EN 61000-3-11:2000, EN 61000-3-12:2005,DIN VDE 0126-1-1:2006-02

EN 60950-1:2006, EN50178:1997, EN 61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-4:2007, EN 61000-3-11:2000, EN 61000-3-12:2005,DIN VDE 0126-1-1:2006-02







66

Art. No. 0201190 0201191 0201192

Model Kaco Powador XP100-HV INT Kaco Powador XP350-HV TL INT Kaco Powador Megawatt Station INTMPP voltage range 450 - 800 V 450 - 830 V 450 - 830 VOpen circuit voltage 950 V 1000 V 1000 VMax. input current 235 A 856 A 3 x 856 ANominal output 100000 W 350000 W 1050000 WOutput voltage 400 V (±10 %) 3 x 290 V (±10%) to external transformer According to country-specific

requirementsPower factor cos phi 0.9 inductive, 0.9 capacitive 0.9 inductive, 0.9 capacitive 0.9 inductive, 0.9 capacitiveFrequency 50 / 60 Hz 50 / 60 Hz 50 / 60 HzHarmonic distortion < 3 % < 3 % < 3 %Max. efficiency 97.1 % 98.2 % 98.2 %Euro efficiency 96.5 % 97.8 % 97.8 %Night-time consumption - - -Ambient temperature -20 to +50 °C -20 to +50 °C -20 to +50 °CHeat dissipation Fan (max. 2420 m³/h) Fan (max. 6420 m³/h) Fan (max. 18000 m³/h)Protection mode IP21 IP21 IP54Circuit type Digital control, with transformer Digital control, transformerless Digital control, transformerlessGrid monitoring According to country-specific

requirementsAccording to country-specificrequirements

According to country-specificrequirements

Display TFT LC display touch screen TFT LC display touch screen TFT LC display touch screenCasing Sheet steel Sheet steel Sheet steelDimensions (W / H / D) 2120 mm / 1200 mm / 920 mm 2110 mm / 2400 mm / 850 mm 7000 mm / 3000 mm / 3440 mmWeight 1120 kg 1430 kg 35000 kg (approx.)Warranty 3 years 3 years 3 yearsNorms EN 60950-1:2006, EN 50178:1997, EN

61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-4:2007, EN 61000-3-11:2000, EN61000-3-12:2005, DIN VDE 0126-1-1:2006-02

EN 60950-1:2006, EN 50178:1997, EN61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-4:2007, EN 61000-3-11:2000, EN61000-3-12:2005, DIN VDE 0126-1-1:2006-02

EN 60950-1:2006, EN 50178:1997, EN61000-6-1:2007, EN 61000-6-2:2005, EN61000-6-4:2007, EN 61000-3-11:2000, EN61000-3-12:2005, DIN VDE 0126-1-1:2006-02


...................................................................................................................................................................


67

SMA Sunny Tripower – Three-phase feed forsimple system planning

Greatest efficiencyCost-effective, safe and flexible – these qualities makethe SMA Sunny Tripower inverters extremely efficientinverters. With an efficiency of 98 %, open circuitvoltage up to 1000 V and power ratings of 10 to17 kW, the inverters are perfectly suited for all appli-cations.

The latest technologyThe innovative product qualities of the Sunny Tripowerseries guarantee simple installation, high yields andsafe grid support. The multi-string technology andthe large input voltage rangemake the inverters readyfor all system dimensioning – from 10 kW to themega-watt range.

Best safetyThe Sunny Tripower inverters meet the requirementsof the VDEW Mean Voltage directives and are there-fore a reliable part of the gridmanagement. The safetyconcept with string failure detection, electronic stringprotection and integrable lightning protection func-tion ensures greatest availability and reduces systemcosts.

Advantages in briefn Integrated DC circuit breaker ESSn String current monitoringn Flexible module dimensioning with two boost con-verters

n Tool-free cable connectionn Innovative DC connector systemn Easily accessible connection arean Communication via Bluetooth

The SMA Sunny Tripower – efficient, innovative and safe. Monitoring of system data with the SMA Sunny Beam.


68

Art. No. 0201111 0201112 0201113 0201114

Model STP 10000TL-10 STP 12000TL-10 STP 15000TL-10 STP 17000TL-10MPP voltage range 320 - 800 V 380 - 800 V 360 - 800 V 400 - 800 VOpen circuit voltage 1000 V 1000 V 1000 V 1000 VMax. input current (Input A /Input B)

22 A / 11 A 22 A / 11 A 33 A / 11 A 33 A / 11 A

MPP tracker 2 pc. 2 pc. 2 pc. 2 pc.Nominal output 10000 W 12000 W 15000 W 17000 WOutput voltage 230 / 400 V, three-phased 230 / 400 V, three-phased 230 / 400 V, three-phased 230 / 400 V, three-phasedPower factor cos phi 1 1 1 1Frequency 50 Hz ±5 Hz 50 Hz ±5 Hz 50 Hz ±5 Hz 50 Hz ±5 HzHarmonic distortion < 4 % < 4 % < 4 % < 4 %Max. efficiency 98.1 % 98.1 % 98.1 % 98.1 %Euro efficiency 97.7 % 97.7 % 97.7 % 97.7 %Night-time consumption < 1 W < 1 W < 1 W < 1 WAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensationHeat dissipation OptiCool fan OptiCool fan OptiCool fan OptiCool fanProtection mode IP65 IP65 IP65 IP65Circuit type Transformerless, three-phased Transformerless, three-phased Transformerless, three-phased Transformerless, three-phasedGrid monitoring SMA Grid guard SMA Grid guard SMA Grid guard SMA Grid guardFault current monitoring Fault current monitoring




Display LCD graphics display LCD graphics display LCD graphics display LCD graphics displayCasing Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 665 mm / 690 mm / 265 mm 665 mm / 690 mm / 265 mm 665 mm / 690 mm / 265 mm 665 mm / 690 mm / 265 mmWeight 65 kg (approx.) 65 kg (approx.) 65 kg (approx.) 65 kg (approx.)Warranty * 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126-1-1:2006-

02CE mark, VDE 0126-1-1:2006-02

CE mark, VDE 0126-1-1:2006-02

CE mark, VDE 0126-1-1:2006-02



...................................................................................................................................................................


69

SMA communication products

Sunny Beam – Complete system controlwithout cablesConvenient and practical, Sunny Beam lets you checkon the status and yield of your solar energy system at aglance, and at any time. The Sunny Beam can monitorup to four inverters via wireless interfaces. The per-formance of the elegant tabletop device is just asimpressive as its functionality. An integrated solar cellprovides the electricity for truly cable-free operation.An integrated rechargeable battery ensures operationalso in the absence of solar radiation.

On a large graphic display, you can immediately see thepresent output, the daily graph, and the daily values ofthe previous 30 days. By pushing and rotating an oper-ating dial, you can set the individual display settings asdesired and select which results are to be displayed. Inaddition to its real-time display, Sunny Beam can alsostore yield data for the last 30 days. The integratedUSBinterface is used to read the saved plant data and toarchive it on the PC by using the Sunny Data Controlsoftware included in the delivery.

Sunny WebBox – The professional datalog-gerPlant monitoring, remote diagnosis, data acquisitionand visualisation: The Sunny WebBox is the communi-

cation center of your power supply system. On thesystem side, it continuously gathers all data from theinverters and thereby allows you to remain constantlyinformed of your system's status at any given time. As amultifunctional datalogger, it also offers you a widerange of possibilities for displayinig, archiving, andfurther processing the system data.

The WebBox is the right choice for the ambitious sys-temoperatorwhowishes to document the systemdatacompletely and continuously. Even from remote loca-tions, where no DSL or telephone connection is avail-able, the PV system candisplay itsmeasurement data atSunny Portal via the optional GSM modem.

Sunny SensorBoxIt was specially developed to further refine perform-ance analysis of solar power stations. With the SunnySensorBox, it is now possible to acquire environmentaldata also, such as irradiation andmodule temperature,in order to detect any PV module faults or failurespromptly. The Sunny SensorBox is simply connectedwith the inverters via the serial RS485 data link to aSunny WebBox.

The radio-based Sunny Beam from SMA ensures easy andcost-effective system monitoring.

The SMA WebBox ensures professional monitoring of up to50 inverters on the Internet.

...................................................................................................................................................................GRID-CONNECTED INVERTERS Accessories...................................................................................................................................................................

70

Art. No. 0201048 0201099 0201050 0201051

Model SMA Sunny Beam incl. USBcable

SMA Sunny Beam Bluetooth SMA Sunny WebBox withoutmodem

SMA Sunny WebBox withanalog modem

Interface USB 1.1 USB 1.1 Ethernet Ethernet, analog modemFrequency 868 MHz - - -Approx. range outdoors /indoors

100 / 30 m 100 m - -

Display LCD, graphic display, 160 x 100pixel

LCD, graphic display, 160 x 100pixel

- -

Handling Rotary push-button Rotary push-button - -Languages English / French / German /

SpanishEnglish / French / German /Spanish / Italian / Portuguese /Dutch / Czech

- -

Data communication Radio Bluetooth With RS485 up to 50 inverters With RS485 up to 50 invertersMemory expansion SD card - - 1 GB 1 GBSolar irradiation measuring - - - -Module temperature sensor - - - -Power supply - - Power supply unit, 115 - 230 V Power supply unit, 115 - 230 VFrequency range of powersupply unit

- - 50 - 60 Hz 50 - 60 Hz

Power consumption (nominal /max.)

- / - - / - 4 W / 12 W 4 W / 12 W

Ambient temperature - - -20 to +55 °C -20 to +55 °CRel. humidity - - 5 - 95 % 5 - 95 %Protection mode IP20 IP20 - -Dimensions (W / H / D) 127 mm / 75 mm / 195 mm 127 mm / 75 mm / 195 mm 225 mm / 130 mm / 57 mm 225 mm / 130 mm / 57 mmWeight 350 g 350 g 750 g 750 gWarranty 2 years 2 years 2 years 2 yearsNorms CE mark CE mark CE mark CE mark

Art. No. 0201052 0201100 0201053

Model SMA Sunny WebBox with GSM modem SMA Sunny WebBox Bluetooth SMA Sunny Sensor Box with mountingplate

Interface Ethernet, GSM modem Ethernet RS485 to Sunny WebBoxFrequency - - -Approx. range outdoors /indoors

- - -

Display - - -Handling - - -Languages - - -Data communication With RS485 up to 50 inverters With Bluetooth up to 50 inverters -Memory expansion SD card 1 GB 1 GB -Solar irradiation measuring - - ASI solar module, precision ±8 %Module temperature sensor - - Pt100, precision ±0.5 °CPower supply Power supply unit, 115 - 230 V Power supply unit, 115 - 230 V Via RS485 line from Sunny WebBoxFrequency range of powersupply unit

50 - 60 Hz 50 - 60 Hz 50 - 60 Hz

Power consumption (nominal /max.)

4 W / 12 W 4 W / 12 W - / -

Ambient temperature -20 to +55 °C -20 to +55 °C -25 to +70 °CRel. humidity 5 - 95 % 5 - 95 % -Protection mode - - IP65Dimensions (W / H / D) 225 mm / 130 mm / 57 mm 225 mm / 130 mm / 57 mm 120 mm / 90 mm / 50 mmWeight 750 g 750 g 500 gWarranty 2 years 2 years 2 yearsNorms CE mark CE mark CE mark


...................................................................................................................................................................Accessories GRID-CONNECTED INVERTERS

...................................................................................................................................................................


71

AccessoriesArt. No. 0201049 0201060 0201061 0201091 0201087Model SMA Piggy Back

wirelessSMA Piggy Back RS485interface SB

SMA Piggy Back RS485interface NG

SMA Piggy Back RS485interface SMC

SMA earthing setpositive ESHV-P-NR

Function Radio transmission fromSunny Boy to SunnyBeam

Data transmission bycable RS485 from SunnyBoy to WebBox

Data transmission bycable RS485 from SunnyBoy New Generation toWebBox

Data transmission bycable RS485 from SunnyMini Central to WebBox

Compatible to SunnyBoy and SMC withtransformer

Inverter communication in anetwork

Up to 4 inverters Up to 50 inverters Up to 50 inverters Up to 50 inverters -

Connection to SMA inverter Add-on kit A Add-on kit A Add-on kit A Add-on kit A -Warranty 2 years 2 years 2 years 2 years 2 years

Art. No. 0201088 0201089 0201090 0201093 0201094Model SMA earthing set

negative ESHV-N-NRSMA Power Balancercable PBL-YCABLE-10

SMA Power Balanceradd-on kit PBL-SMC-10-NR

SMA fuse kit 8 A (SIBA,900 V)


Function Compatible to SunnyBoy and SMC withtransformer

Pluggable toSMC 9000/10000/11000-TL-10

Add-on kit to connectorsystem, toSMC 6000/7000/8000TL

String fuse kit forSMC 9000/10000/11000-TL



- - - - -

Connection to SMA inverter - - - - -Warranty 2 years 2 years 2 years 2 years 2 years

Art. No. 0201095 0201096 0201097 0201098 0201101Model SMA fuse kit 12 A (SIBA,

900 V)SMA fuse kit 16 A (SIBA,900 V)


SMA wind sensor incl.3 m cable

SMA Piggy BackBluetooth

Function String fuse kit forSMC 9000/10000/11000-TL



For the connection toSMA SensorBox

Transmission Bluetoothfrom Sunny Boy andSMC to Sunny Beam


- - - - -

Connection to SMA inverter - - - - -Warranty 2 years 2 years 2 years 2 years 2 years

...................................................................................................................................................................GRID-CONNECTED INVERTERS Accessories...................................................................................................................................................................


72

BatteriesBatteries must adjust exactly to your requirements: Westock low-maintenance and maintenance-free leadbatteries of low, medium and high capacity, resistant gelbatteries, block batteries for stationary solar systems andmany other items.

HOPPECKE

75

HoppeckeSolar batteries for all applicationsHoppecke power.com – The all-roundersThe longevity, the cycle stability and the high opera-tional reliability make the batteries of the Hoppeckepower.com series true all-rounders for solar installa-tionswith small tomedium loads. The use of an electro-lyte fixed in fleece results in optimum load acceptanceand very good corrosion resistance. The casing fromshock-resistant plastics and the battery lid with inte-grated handle-bar lead to easy handling and robust-ness in daily use.

Hoppecke OPzS solar – The most powerfulWith their tubular plates, the Hoppecke OPzS solarbatteries offer maximum durability and cycle stability.Because they are produced using special grates withhigher lead content, both charge acceptance and cor-rosion life time are optimal. The optional Aqua Genrecombiners can reduce the water losses during oper-ation and minimise the related maintenance require-ments.

Hoppecke OpzV solar – The maintenance-freeDue to their closed gel technology, theHoppeckeOPzVsolar batteries enable maintenance-free operation.The excellent cycle stability provides the greatest reli-ability for the supply of stand-alone systems or con-sumers away from the grid. In addition, the closed cycleof potential recyclables within a certified recycling sys-tem protects the environment.

The benefits at a glancen Highest longevity and cycle stabilityn Best operational reliabilityn Optimum load acceptancen Minimal maintenance requirementsn Easy handlingn Robust design

With capacities of 52 to 220 Ah, the Hoppecke power.comseries provides models for any requirement.

The enclosed Hoppecke power.com lead batteries can beoperated horizontally and are maintenance-free. Re-fillingof water is unnecessary.

...................................................................................................................................................................BATTERIES Low-maintenance...................................................................................................................................................................

76

Art. No. 0303041 0303042 0303043 0303044 0303045

Model Hoppecke power.comSB 12V 50

Hoppecke power.comSB 12V 60




Voltage 12.00 V 12.00 V 12.00 V 12.00 V 12.00 VCapacity (10 h) 52 Ah 63 Ah 80 Ah 95 Ah 111 AhCapacity (100 h) 62 Ah 74 Ah 94 Ah 111 Ah 130 AhDimensions (L / W / H) 229 mm / 177 mm /

230 mm229 mm / 177 mm /230 mm

344 mm / 177 mm /230 mm

344 mm / 177 mm /230 mm

498 mm / 177 mm /230 mm

Weight 26.0 kg 26.5 kg 37.5 kg 38.0 kg 52.0 kgWarranty * 2 years 2 years 2 years 2 years 2 years

Art. No. 0303046 0303047 0303048 0303049 0303050

Model Hoppecke power.comSB 12V 130




Hoppecke 4 OPzS 200solar


230 mm498 mm / 177 mm /230 mm

242 mm / 170 mm /275 mm

308 mm / 170 mm /275 mm

105 mm / 208 mm /420 mm


Art. No. 0303051 0303052 0303053 0303054 0303055

Model Hoppecke 5 OPzS 250solar






420 mm147 mm / 208 mm /420 mm

126 mm / 208 mm /535 mm

147 mm / 208 mm /535 mm

168 mm / 208 mm /535 mm


Art. No. 0303056 0303057 0303058 0303059 0303060







710 mm215 mm / 235 mm /710 mm

215 mm / 277 mm /710 mm

215 mm / 277 mm /710 mm

215 mm / 277 mm /855 mm



...................................................................................................................................................................Low-maintenance BATTERIES

...................................................................................................................................................................


77

Art. No. 0303061 0303062 0303063 0303066 0303067




Hoppecke 4 OPzV solar.power 250



815 mm215 mm / 490 mm /815 mm

215 mm / 580 mm /815 mm

105 mm / 208 mm /420 mm

126 mm / 208 mm /420 mm


Art. No. 0303068 0303069 0303070 0303071

Model Hoppecke 6 OPzV solar.power370

Hoppecke 5 OPzV solar.power420



Voltage 1.85 V 1.85 V 1.85 V 1.85 VCapacity (10 h) 309 Ah 361 Ah 433 Ah 505 AhCapacity (100 h) 371 Ah 412 Ah 515 Ah 618 AhDimensions (L / W / H) 147 mm / 208 mm / 420 mm 126 mm / 208 mm / 535 mm 147 mm / 208 mm / 535 mm 168 mm / 208 mm / 535 mmWeight 28.0 kg 31.0 kg 37.0 kg 42.0 kgWarranty * 2 years 2 years 2 years 2 years

Art. No. 0303072 0303073 0303074 0303075

Model Hoppecke 6 OPzV solar.power750





Art. No. 0303076 0303077 0303078 0303079

Model Hoppecke 12 OPzV solar.power 1700





* - Provided the batteries have been correctly installed


...................................................................................................................................................................BATTERIES Low-maintenance...................................................................................................................................................................


78

AccessoriesArt. No. Model Description0303064 Hoppecke Aqua Gen Premium Top H, <340 Ah Recombiner for all OPzS batteries <340 Ah0303065 Hoppecke Aqua Gen Premium Top V, >340 Ah Recombiner for all OPzS batteries >340 Ah

Hoppecke OPzS solar batteries should always be used incombination with the optional Aqua Gen recombiners tokeep the maintenance requirements to a minimum.

The series Hoppecke OPzV solar is based on a closed geltechnology, which makes the batteries maintenance-freeand safe.

...................................................................................................................................................................Low-maintenance BATTERIES

...................................................................................................................................................................


79

ControllersA high-quality charge controller secures a long service lifeof the battery and provides correct power supply. We offerstate-of-the-art development, components of the latestgeneration and extensive functionality and performancealso in solar charge controllers.

MORNINGSTAR

81

Second ProStar generation

The ProStar is a microprocessor-controlled solar con-troller that features numerous additional functions,besides exhaustive-discharge and overcharge protec-tion. For example, it switches over from 12 to 24 Vdepending on application.

The ProStar is available for 15 or 30A and for 12, 24 and48 V.

The battery type (gel, dry-cell or wet-cell battery) canbe set by means of a contact. Both the battery con-nection and the module connection are protectedagainst reverse polarity.

As an option, the ProStar is available with a liquid-crystal display (LCD) and a master switch. The masterswitch allows the solar modules and the load to beconnected and disconnected.

The 4-step charging algorithm ensures gentle recharg-ing of the battery even at low charging currents.

Special features of the ProStarn Digital measuring instrument; very precise voltageand current reading, low power consumption(22 mA)

n On/Off switchn Indication of five different protection functions andisolation states

n Self-diagnosis (self-test)n Positive grounding (optional)n Temperature sensor

Morningstar, as the manufacturer, grants 5 years war-ranty on the ProStar series.

COMPENSATION

TIME

TEN

SIO

N

NIGHTTIME

FULLCHARGE

PULSE WIDTH-MODULATED

CONTROL TRICKLE CHARGINGNIGHTTIME

The second generation of ProStar sets new standards forreliability and self-diagnosis. Available models: 15 or 30 A,12, 24 or 48 V.

Four charging steps for prolonging the battery service life.

...................................................................................................................................................................CONTROLLERS Solar Controllers...................................................................................................................................................................

82

Art. No. 0400142 0400143 0400144 0400151 0400161

Model ProStar-15 ProStar-15 with LCD ProStar-15 48V withLCD

ProStar-30 ProStar-30 with LCD

Module current 15 A 15 A 15 A 30 A 30 ALoad current 15 A 15 A 15 A 30 A 30 ASystem power rating 250 W (12 V) / 500 W

(24 V)250 W (12 V) / 500 W(24 V)

1000 W 500 W (12 V) / 1000 W(24 V)

500 W (12 V) / 1000 W(24 V)

System voltage Automatic 12 or 24 V Automatic 12 or 24 V 48 V Automatic 12 or 24 V Automatic 12 or 24 VMax. module voltage 50 V 50 V 100 V 50 V 50 VMin. operating voltage 8 V 8 V 15 V 8 V 8 VAccuracy at 12 V ±40 mV ±40 mV - ±40 mV ±40 mVAccuracy at 24 V ±60 mV ±60 mV - ±60 mV ±60 mVAccuracy at 48 V - - ±80 mV - -Option for paraller connection Yes Yes Yes Yes YesPower consumption 22 mA at 12 V, 25 mA at

24 V22 mA at 12 V, 25 mA at24 V

28 mA 22 mA at 12 V, 25 mA at24 V

22 mA at 12 V, 25 mA at24 V

Charging alogorithm Pulse-width modula-tion, constant voltage

Pulse-width modula-tion, constant voltage




Reverse-polarity protection All 4 inputs All 4 inputs All 4 inputs All 4 inputs All 4 inputsExhaustive-discharge protec-tion

Yes, 11.4 V at 12 V,22.8 V at 24 V

Yes, 11.4 V at 12 V,22.8 V at 24 V

Yes, 45.6 V at 48 V Yes, 11.4 V at 12 V,22.8 V at 24 V

Yes, 11.4 V at 12 V,22.8 V at 24 V

Operating temperature -40 to +60 °C -40 to +60 °C -40 to +60 °C -40 to +60 °C -40 to +60 °CConnection Connection terminals

for flexiblele leads upto 10 mm²

Connection terminalsfor flexiblele leads upto 10 mm²




Dimensions (W / H / D) 153 mm / 105 mm /55 mm

153 mm / 105 mm /55 mm

153 mm / 105 mm /55 mm

153 mm / 105 mm /55 mm

153 mm / 105 mm /55 mm

Weight 340 g 340 g 340 g 340 g 340 gWarranty 5 years 5 years 5 years 5 years 5 years

AccessoriesArt. No. 0400140

Model RTS for TriStar and ProStarDescription Remote temperature sensor for temperature-compensated chargingFunction Measurement of battery temperatureMounting Directly on battery, 10 m cableAmbient temperature -Power consumption -

Dimensions of the ProStar (all information in mm).

...................................................................................................................................................................Solar Controllers CONTROLLERS

...................................................................................................................................................................


83

SHS series for home solar systems of up to 170 W

The familiar quality and reliability of Morningstar arenow also available in the form of a low-cost solar con-troller. The SHS solar controller is ideal for small instal-lations up to 170 W.

Advantages of the SHSn Electronic protectionThe SHS solar controller features internal electronicfuses that do not need to be exchanged. Any con-nection faults when installing do not damage thecontroller.

n Protection against moistureThe electronic circuitry of the SHS solar controllerfeatures a moisture-impervious coating, thus mini-

mizing damage as the result of moisture or nestinginsects.

n Simple applicationThe SHS solar controller functions fully automaticallyand requires no calibration or user settings.

n Information indicationLEDs indicate status information such as batterycharge state.

n Automatic load disconnectionAutomatic load disconnection in the event ofundervoltage and full rechargingprolong the servicelife of the battery. The SHS maximizes solar energysupply to the battery.

Solar module

Battery Load

SHSsolar controller

Two versions of the low-cost SHS are available: The SHS 6 for100 W and 6 A module and load current and the SHS 10 for170 W and 10 A.

Simple schematic showing the use of an SHS solar controller.


84

Art. No. 0400121 0400122

Model SHS-6 SHS-10Module current 6 A 10 ALoad current 6 A 10 ASystem power rating 100 W 170 WSystem voltage 12 V 12 VControl value 14.3 V 14.3 VExhaustive-discharge protec-tion / cut-out value

Yes, 11.5 V Yes, 11.5 V

Restart value 12.6 V 12.6 VCharging mode Pulse-width modulation, 4 phases Pulse-width modulation, 4 phasesSuitable battery type Lead-cell battery Lead-cell batteryElectronic protection features Short-circuit and overcurrent, reverse leakage current during

nighttime, overvoltage limitation for load protection,lightning strike protection

Short-circuit and overcurrent, reverse leakage current duringnighttime, overvoltage limitation for load protection,lightning strike protection

Connection Connection terminals for cable sizes up to 4 mm², corrosion-protected

Connection terminals for cable sizes up to 4 mm², corrosion-protected

Operating temperature -25 to +50 °C -25 to +50 °CRelative humidity 100 % non condensing 100 % non condensingCasing Plastic, IP22 Plastic, IP22Dimensions (W / H / D) 161 mm / 66 mm / 36 mm 161 mm / 66 mm / 36 mmWeight 113 g 113 gWarranty 2 years 2 yearsNorms CE mark, Worldbank CE mark, Worldbank

SHSHSHS TM

SOLAR CONTROLLER

Green ON when solar cell charges battery

Green ON at high battery charge levelAmber ON at moderate battery charge levelRed FLASHING at low battery charge level Red ON when load is disconnected

Green ON, then

Amber ON, then

Red ON

on commissioning

Green ONAmber ONRed ON

all ON – error message

SHSHSS TM

SOLAR CONTROLLER

+ –SOLAR

+ –BATTERY

+ –LOAD

4 3 2 1 6 5

4 3 2 1 6 5

Negative pole of batteryPositive pole of battery

43

21

Negative pole of solar modulePositive pole of solar module

Negative pole of loadPositive pole of load6

5

Colour coding of the LED indicators and how to interpretthe various indications.

Connections and terminals of the SHS and installationsequence.


...................................................................................................................................................................


85

Morningstar SunGuard and SunKeeperThe small and inexpensive charge controllers

SunGuard SG-4The SunGuard SG-4 is one of the smallest,mostmodernand most economic charge controllers. It is impressivedue to low costs, absolutely outstanding reliability,pulse width modulated (PWM) battery charging andconsistent high quality.

Featuresn ISO 9002 quality programn 100% electronic circuitryn Series connectionn Genuine pulse modulation from 0 to 100%n Temperature compensationn 25% rated overload protectionn No load reduction requiredn Lightning protection

SunKeeper SK-6 and SunKeeper SK-12The SunKeeper is available in 6 A and 12 A versions.Both are operated using 12 V DC. As the charge con-troller has extremely efficient electronics, it also with-stands very high temperatures of up to 70°C. Both theSK-6 as well as the SK-12 devices are certified for Haz-ard Category 1, Zone 2 locations. This even makespossible the operation of the charge controller for oiland gas applications.

Featuresn High reliabilityn Classified for outdoor applications without anothercase

n Longer battery service lifen Classified for applications at hazardous locationsn Status display using 2 LEDsn Simple installation

The SunGuard SG-4 is one of the smallest charge controllersin the world and is impressive due to its efficient pulse widthmodulation.

The SunKeeper SK-6 and the SunKeeper SK-12 can be direct-ly screwed into the connection sockets of solar modules.


86

Art. No. 0400311 0400250 0400249

Model SunGuard SG-4 SunKeeper SK-6 SunKeeper SK-12Load current 4.25 A 6.00 A 12.00 ASystem voltage 12 V 12 V 12 VMax. voltage 30 V 30 V 30 VMin. operating voltage 0 V 0 V 0 VAccuracy 60 mV - -Option for paraller connection No No NoPower consumption 6 mA 7 mA 7 mATemperature compensation -28 mV/°C -30 mV/°C -30 mV/°CCharging mode Pulse-width modulation PWM Pulse-width modulation PWM Pulse-width modulation PWMConnection Weatherproof Hypalon connection

cables; cables each 1.3 to 1.8 mm²PG13.5 / M20 / 0.5 inch, cable 2.0 mm²each

PG13.5 / M20 / 0.5 inch, cable 2.0 mm²each

Reverse-polarity protection - Integrated IntegratedOperating temperature -40 to +85 °C -40 to +70 °C -40 to +70 °CCasing Shockproof ABS plastic case Plastic case, UV-resistant Plastic case, UV-resistantDimensions (W / H / D) 64 mm / 51 mm / 38 mm 99 mm / 51 mm / 13 mm 99 mm / 51 mm / 13 mmWeight 90 g 110 g 110 gWarranty 5 years 5 years 5 yearsNorms CE mark CE mark CE mark


...................................................................................................................................................................


87

SunLight solar lighting controller – The solutionfor automatic light control

New technologyThe advanced SunLight lighting controller ofMorning-star is the solution for automatic light control. It con-nects the SunSaver with an extremely reliable micro-controller for precise light control. In addition to itstechnical features, the SunLight convinceswith its com-pact casing and the user-friendly user interface.

OperationBy means of a digital rotary switch, one of ten lightingprogrammes can be selected. The programmes have atime precision of two seconds. Use the test button toinitiate a five-minute test of the lighting manually.However, this option is limited to three times in sub-sidiary control operation.

Four versionsDepending on application and connected battery, theMorningstar SunLight is available in four different ver-sions. While the technical features of the devices areidentical, youwill have to decidewhether the SunLightwill be connected to a 12 V or 24 V battery andwhetherit will be operated with a rated current of 10 A or 20 A.

Features in briefn High precision through digital technologyn Fully automatic operationn Ten different programmesn Manual testing possiblen Protection through overload subsidiary controln Detection of day and night by means of the solargenerator

n Temperature compensation

The SunLight solar lighting controller: Clever technology in asmall casing

Pre-set light control: Practical and intelligent


88

Art. No. 0400261 0400281 0400271 0400291

Model Morningstar SunLight SL-10L-12V

Morningstar SunLight SL-20L-12V



Rated current 10 A 20 A 10 A 20 ASystem voltage 12 V 12 V 24 V 24 VControl value (Dry battery /Wet battery)

14.1 V / 14.4 V 14.1 V / 14.4 V 28.2 V / 28.8 V 28.2 V / 28.8 V

Exhaustive-discharge protec-tion

11.7 V 11.7 V 23.4 V 23.4 V

Restart voltage 12.8 V 12.8 V 25.6 V 25.6 VTemperature compensation -27 mV/°C -27 mV/°C -54 mV/°C -54 mV/°CPower consumption 8 mA 8 mA 9 mA 9 mAConnection Connection terminals, up to

5.2 mm²Connection terminals, up to5.2 mm²

Connection terminals, up to5.2 mm²


Operating temperature -40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °CCasing Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminiumDimensions (W / H / D) 168 mm / 55 mm / 34 mm 168 mm / 55 mm / 34 mm 168 mm / 55 mm / 34 mm 168 mm / 55 mm / 34 mmWeight 260 g 260 g 260 g 260 gWarranty 5 years 5 years 5 years 5 years


...................................................................................................................................................................


89

SunSaverCompact and watertight

SunSaver technology offers excellent reliability, pulsewidth-modulated (PWM) battery charging and a highquality level.

Seven different versions of the compact solar control-ler are available for 6.5, 10 or 20 A solar module cur-rent, for 12 or 24 V battery systems andwith orwithoutexhaustive-discharge protection (LVD).

The SunSaver features the same 4-step charging algo-rithm as the ProStar Series.

The SunSaver is suitable specifically for smaller appli-cations and can be used under the most stringent con-ditions owing to the completely encapsulated housing.

It is absolutely watertight and is consequently virtuallypredestined for the use in the open air, on board ofships or in damp rooms.

Long battery service life thanks to temper-ature sensorA temperature sensor incorporated in the casing per-mits the SunSaver to allow for the various end-of-charge voltages of the battery, consequently consider-ably prolonging its service life. Jumpers are used to setthe battery type (wet-cell or dry-cell batteries).

Morningstar, as manufacturer, grants 5 years warrantyon the SunSaver series.

Modeldesignation

• SS-6

• SS-6L

• SS-10

• SS-10L

• SS-10L-24V

• SS-20L

• SS-20L-24V

Solar rating (A) Load rating (A) 12VLVD 24V0 10 20 0 10 20

Reliable solar controllers with a long service life for leisureand industrial applications. Seven models are available forselection: 12 or 24 V, 6, 10 or 20 A, with or without exhaus-tive-discharge protection. The connection terminals complywith the Marine Standard, and the casing is fully encapsu-lated and anodized.

SunSaver selection table.


90

Art. No. 0400171 0400181 0400191 0400211

Model SS-6 SS-6L SS-10 SS-10LModule current 6.5 A 6.5 A 10.0 A 10.0 ALoad current 10 A 6 A 10 A 10 ASystem power rating 100 W 100 W 170 W 170 WSystem voltage 12 V 12 V 12 V 12 VMax. module voltage 30 V 30 V 30 V 30 VMin. operating voltage 6 V 6 V 6 V 6 VAccuracy ±12 mV ±12 mV ±12 mV ±12 mVOption for paraller connection Yes Yes Yes YesPower consumption 6 - 10 mA 6 - 10 mA 6 - 10 mA 6 - 10 mATypical voltage drop,photovoltaic/battery

0.4 V 0.4 V 0.4 V 0.4 V

Typical voltage drop,battery/load

0.300 V 0.300 V 0.300 V 0.300 V

Connection Connection terminals, up to5.2 mm²




Reverse-polarity protection All 3 inputs All 3 inputs All 3 inputs All 3 inputsExhaustive-discharge protec-tion

No Yes, 11.5 V No Yes, 11.5 V

Operating temperature -40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +85 °CCasing Aluminium, IP65 Aluminium, IP65 Aluminium, IP65 Aluminium, IP65Dimensions (W / H / D) 152 mm / 55 mm / 34 mm 152 mm / 55 mm / 34 mm 152 mm / 55 mm / 34 mm 152 mm / 55 mm / 34 mmWeight 230 g 230 g 230 g 230 gWarranty 5 years 5 years 5 years 5 years

Art. No. 0400231 0400241 0400251 0400617

Model SS-10L 24 V SS-20L SS-20L 24 V SS-MPPT-15LModule current 10.0 A 20.0 A 20.0 A 15.0 ALoad current 10 A 20 A 20 A 15 ASystem power rating 340 W 340 W 680 W 200 W (12 V) / 400 W (24 V)System voltage 24 V 12 V 24 V 12 / 24 VMax. module voltage 60 V 30 V 60 V 75 VMin. operating voltage 6 V 6 V 6 V 7 VAccuracy ±55 mV ±12 mV ±55 mV -Option for paraller connection Yes Yes Yes YesPower consumption 6 - 10 mA 6 - 10 mA 6 - 10 mA 35 mATypical voltage drop,photovoltaic/battery

0.4 V 0.4 V 0.4 V -

Typical voltage drop,battery/load

0.300 V 0.300 V 0.300 V 0.125 V

Connection Connection terminals, up to5.2 mm²



Connection terminals, up to16 mm²

Reverse-polarity protection All 3 inputs All 3 inputs All 3 inputs All 3 inputsExhaustive-discharge protec-tion

Yes, 23 V Yes, 11.5 V Yes, 23 V Yes, 23 V

Operating temperature -40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +60 °CCasing Aluminium, IP65 Aluminium, IP65 Aluminium, IP65 Aluminium, IP65Dimensions (W / H / D) 152 mm / 55 mm / 34 mm 152 mm / 55 mm / 34 mm 152 mm / 55 mm / 34 mm 169 mm / 64 mm / 73 mmWeight 230 g 230 g 230 g 600 gWarranty 5 years 5 years 5 years 5 years

152

140

2555

4 mounting holes, Ø 5

80

13

34

4.6

2.3

Dimensions of the SunSaver series (all information in mm).


...................................................................................................................................................................


91

Morningstar SunSaver DuoThe charge controller for two batteries

The SunSaver Duo is a charge controller with pulsewidth modulation. It charges two batteries simultane-ously. This system is ideal for motorhomes and boats asthe "onboard battery" and the "engine battery" forexample can be loaded using the same photovoltaicsystem. The priorities of the batteries and many otherparameters can be selected and adjusted by the useraccording to the respective requirements. All settingsare made using the separate control panel. It has abacklit display which shows the current status of thephotovoltaic system.

More efficiencyAs twobatteries can be chargedusing the same system,a second system for energy generation is not needed.This saves not only costs but also space and makes thegeneration of solar energy much more efficient.

Simple and clean installationThe SunSaver Duo is installed in the vicinity of thebatteries. The controller is connected to the displayinstrument using a cable included in the standard deliv-ery. The display instrument can either be fixed to thewall using a bracket or recessed in a cut-out for exam-ple in the wall or in the dashboard.

The benefits at a glancen Charging of two batteriesn Provision of information about the system statusn Low costsn Simple installationn Longer battery service lifen Comprehensive electronic safety devicesn High reliabilityn Remote display included in the package contents

The SunSaver Duo also has an LCD display for checking thecharge status of the batteries.

The SunSaver Duo is suitable for simultaneously chargingboth the onboard as well as the starter battery.


92

Art. No. 0400615

Model SunSaver Duo SSD-25RMLoad current 25 ASystem voltage 12 VMax. voltage 30 VMin. operating voltage 1 VCharging mode Pulse-width modulation PWMBattery charging priority 90/10 % or 50/50 %Power consumption(Controller / Remote display)

6 - 10 mA / 6 - 15 mA

Control value 14.1 - 14.4 VExhaustive-discharge protec-tion

13.7 V

Overcharge protection 14.8 VReverse-polarity protection YesTemperature compensation -30 mV/°COperating temperature(Controller / Remote display)

-40 to +45 °C / -20 to +60 °C

Casing Anodized aluminiumDimensions controller (W / H /D)

170 mm / 56 mm / 41 mm

Dimensions remote display (W/ H / D)

97 mm / 97 mm / 31 mm

Weight (Controller / Remotedisplay)

340 g / 135 g

Warranty 5 yearsNorms CE mark


...................................................................................................................................................................


93

TriStarOne unit, three functionsThe TriStar controller fromMorningstar is a 3-functioncontroller for the reliable charging of batteries, loadcontrol and bypass control. It operates in one of theseoperating modes. Two or more controllers can be usedfor simultaneous usage of several functions.

The TriStar is available for 45 and 60 A at 12 to 48 V DCvoltage for solar installations up to 4 kW.

Optionally, a display is available for the TriStar. Thecontroller is designed both for home solar installationsand for professional applications.

Battery sensor and temperature sensorConnecting battery sensor cables and an optionalremote temperature sensor enhances control accuracy.A pulse width-modulated primary current charge withconstant voltage prolongs the battery service life.

RS-232 interfaceThe TriStar features an RS-232 interface for configura-tion, data acquisition, remote monitoring and remotecontrol via PC.

It is fully protected against reverse polarity, short cir-cuit, overcurrent and overvoltage.

The TriStar 60 with incorporated display (option) – the largeheat sink allows operation at full capacity up to an ambienttemperature of 45 °C.

Brief description of the three functions of the TriStar.

...................................................................................................................................................................CONTROLLERS Universal Controllers...................................................................................................................................................................

94

Art. No. 0400131 0400132 0400621 0400622

Model TriStar TS-45 TriStar TS-60 TriStar TS-45 MPPT TriStar TS-60 MPPTSolar, load or bypass current 45 A 60 A 45 A 60 ASystem voltage 12 - 48 V 12 - 48 V 12 - 48 V 12 - 48 VAccuracy < 0.1 % ±50 mV (12/24 V) /

< 0.1 % ±100 mV (48 V)< 0.1 % ±50 mV (12/24 V) /< 0.1 % ±100 mV (48 V)

< 0.1 % ±50 mV (12/24 V) /< 0.1 % ±100 mV (48 V)

< 0.1 % ±50 mV (12/24 V) /< 0.1 % ±100 mV (48 V)

Min. operating voltage 9 V 9 V 8 V 8 VMax. solar voltage (Uoc) 125 V 125 V 150 V 150 VPower consumption ≤ 4 W ≤ 4 W ≤ 4 W ≤ 4 WElectronic protection features Reverse-polarity, short-circuit

and overcurrent, reverseleakage current, lightningstrike

Reverse-polarity, short-circuitand overcurrent, reverseleakage current, lightningstrike

Overload, short-circuit, highvoltage, temperature,lightning strike, transientsurge voltages, countercurrent(night)

Overload, short-circuit, highvoltage, temperature,lightning strike, transientsurge voltages, countercurrent(night)

Connection Connection terminals forcable sizes up to 35 mm²; pre-punched cable lead-througs2.5 / 3.2 cm

Connection terminals forcable sizes up to 35 mm²; pre-punched cable lead-througs2.5 / 3.2 cm



Ambient temperature -40 to +45 °C -40 to +45 °C -40 to +45 °C -40 to +45 °CRelative humidity 100 % non condensing 100 % non condensing 100 % non condensing 100 % non condensingCasing For use in enclosed spaces For use in enclosed spaces Type 1 (indoors and

ventilated), IP20Type 1 (indoors andventilated), IP20

Dimensions (W / H / D) 12.7 cm / 26 cm / 7.1 cm 12.7 cm / 26 cm / 7.1 cm 29.1 cm / 13 cm / 14.2 cm 29.1 cm / 13 cm / 14.2 cmWeight 1.6 kg 1.6 kg 4.2 kg 4.2 kgWarranty 5 years 5 years 5 years 5 yearsNorms CE, UL CE, UL CE, UL CE, UL

AccessoriesArt. No. 0400135 0400136 0400140

Model TriStar Meter TriStar Remotemeter RTS for TriStar and ProStarDescription 2 x 16 display for direct attachment to

TriStar2 x 16 display for spatially separatedisplay

Remote temperature sensor fortemperature-compensated charging

Function Display of system and controllerinformation, data acquisition, bar charts

Display of system and controllerinformation, data acquisition, bar charts

Measurement of battery temperature

Mounting In place of front panel on controller Built-in model, including 30 m cable Directly on battery, 10 m cableAmbient temperature -40 to +60 °C -40 to +60 °C -Power consumption 7.5 mA 7.5 mA -

...................................................................................................................................................................Universal Controllers CONTROLLERS

...................................................................................................................................................................


95

Stand-alone InvertersLeading stand-alone inverters of our range safeguardmaximum energy yields – be it mini-inverters, stringinverters or backup inverters with maximum efficiency.

KACO

SMA

MORNINGSTAR

97

Kaco stand-alone invertersThe new sine-wave stand-alone invertersIndependent energy supplyThe new sine-wave inverters are ideally suited for usein areas where no or only a very unreliable publicpower supply is available. By converting the direct-current voltage of a battery (e.g. 12 V, 24 V or 48 V)to alternating-current voltage (230 V / 50 Hz) thesedevices provide independent power supply anywhere.

Inexpensive alternativeThe alternating-current voltage generated by the Kacoinverters can power commercially available 230 V con-sumers of any kind. In most cases, this is significantlycheaper than more expensive and often less efficient12 V devices with high energy consumption.

Pure sine-wave voltageThe pure sine-wave voltage generated by Kaco sine-wave inverters can also power sensitive consumers suchas energy-saving lamps, TVs, refrigerators or com-puters. Solutions with "modified sine-wave voltage"(trapezoidal or triangular wave-form), or square-wavevoltage may damage sensitive consumers.

The benefits at a glancen Pure-sine-waven High peak efficiencyn Low cable lossesn Extreme high peak powern Nominal power at high ambient temperature possi-ble

n Coatedpcb –Applicable in rough ambient conditionsn High reliability

Kaco Kl 1000 and Kl 2000 – The new sine-wave stand-aloneinverters with integrated display

The Kaco Kl 250 – The inexpensive stand-alone inverter forup to 250 W

...................................................................................................................................................................STAND-ALONE INVERTERS 230 V, 50 Hz...................................................................................................................................................................

98

Art. No. 0600367 0600370 0600368 0600371 0600369 0600372

Model Kaco KI 250 - 12 V Kaco KI 250 - 24 V Kaco KI 1000 - 12 V Kaco KI 1000 - 24 V Kaco KI 2000 - 24 V Kaco KI 2000 - 48 VOutput voltage 230 V 230 V 230 V 230 V 230 V 230 VFrequency 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 HzAC continuous output 30 °C 200 W 200 W 800 W 800 W 1600 W 1600 WAC continuous output 30 °C(30 / 5 / 0.01 min)

250 / 360 / 460 W 250 / 360 / 460 W 1000 / 1300 / 2200W 1000 / 1300 / 2200W 2000 / 2880 / 4800W 2000 / 2880 / 4800W

Max. current 15 A 15 A 30 A 30 A 30 A 30 AHarmonic distortion < 3 % < 3 % < 3 % < 3 % < 3 % < 3 %Input voltage 12 V 24 V 12 V 24 V 24 V 48 VMax. efficiency 91 % 91 % 93 % 93 % 94 % 94 %Battery capacity(recommended)

125.0 Ah 62.5 Ah 500.0 Ah 250.0 Ah 500.0 Ah 250.0 Ah

Ambient temperature -15 to +60 °C -15 to +60 °C -15 to +60 °C -15 to +60 °C -15 to +60 °C -15 to +60 °CProtection mode IP20 IP20 IP20 IP20 IP20 IP20Casing Aluminium Aluminium Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 130 mm / 88 mm /

216 mm130 mm / 88 mm /216 mm

274 mm / 125 mm /354 mm

274 mm / 125 mm /354 mm

274 mm / 125 mm /454 mm

274 mm / 125 mm /454 mm

Weight 3.3 kg 3.3 kg 15.0 kg 15.0 kg 23.0 kg 23.0 kgWarranty 3 years 3 years 3 years 3 years 3 years 3 yearsNorms EN60950, EN55014,

EN61000-6-1,EN61000-6-3,EN61000-3-2,EN55022, ECE R10

EN60950, EN55014,EN61000-6-1,EN61000-6-3,EN61000-3-2,EN55022, ECE R10





...................................................................................................................................................................230 V, 50 Hz STAND-ALONE INVERTERS

...................................................................................................................................................................


99

SMA Sunny Island

Off-grid inverters, system managers ofstand-alone energy suppliesTogether with the battery unit, the stand-alone inver-ter Sunny Island creates a standardAC voltage grid intowhich all components, from electrical appliances toelectricity generators, can be integrated. With this ACcoupling and the Sunny Island as its system manager,SMA has developed the technological solution forenergy supply in remote areas which are far awayfrom the mains grid, or for emergency power supplyin unstable grids.

For the first time, PV systems, wind turbines, dieselgenerators, hydroelectric or combined heat and powerplants can now be coupled on the AC side along with230 V loads, eliminating the need for expensive DCcabling and providing maximum flexibility.

Quality electricityThe Sunny Island guarantees stand-alone grids withperfectly sinusoidal voltage, high overload capability,and excellent reliability.

System monitoringThe Sunny Island product range is compatible with allSMA communicationproducts. Themonitoring optionsrange fromon-sitemonitoring, right through to visual-isation on the Internet.

ExpandabilityStand-alone gridswith the Sunny Island canbe expand-ed from a single-phase supply to a 3-phase grid withseveral Sunny Islands. This can be done step by step,according to the increasing energy demand.

SMA Smart LoadThe Smart Load SL 6000 is the perfect addition to anyunregulated power generator in an AC-coupled stand-alone grid. Its unique automatic control allows it toadapt to different power conditions optimally. In theevent of an energy surplus, the Sunny Islands slightlyincrease the frequency, whereupon the Smart Loadincreases its power consumption. In so doing, it feedsprecisely the right amount of energy to a load untilbalance has been restored in the system.

The Sunny Island as the core of self-sufficient energy supplyin the off-grid area.

Since all Sunny Islands are based on an AC coupling, stand-ardised consumers can be used in the entire system.


100

Art. No. 0600365 0600366 0600345 0600346 0600348 0600349

Model SMA SI 2012 SMA SI 2024 SMA SI 3324 SMA SI 4248 SMA SI 5048 SMA SL 6000Output voltage 202 - 253 V 202 - 253 V 202 - 253 V 202 - 253 V 202 - 253 V 3 x 0 - 230 VFrequency 45 - 65 Hz 45 - 65 Hz 45 - 55 Hz 45 - 55 Hz 45 - 65 Hz 45 - 65 HzAC continuous output 25 °C /45 °C

2000 / 1400 W 2200 / 1600 W 3300 / 2300 W 4200 / 3400 W 5000 / 4000 W 3 x 0 - 2000 W

AC continuous output 25 °C(30 / 5 / 1 min)

2700 / 3600 / 3600W 2900 / 3800 / 3800W 4200 / 4600 / 5000W 5400 / 6200 / 7000W 6500 / 7200 / 8400W -

AC rated current 8.7 A 9.6 A 14.5 A 18.0 A 21.7 A -Max. power (peak value for100 ms)

25 A 25 A 100 A 100 A 100 A -

Harmonic distortion < 4 % < 4 % < 3 % < 3 % < 3 % -Power factor -1 to +1 -1 to +1 -1 to +1 -1 to +1 -1 to +1 -Input voltage 172.5 - 250 V 172.5 - 250 V 172.5 - 250 V 172.5 - 250 V 172.5 - 250 V 3 x 180 - 270 VInput frequency 40 - 70 Hz 40 - 70 Hz 40 - 60 Hz 40 - 60 Hz 40 - 70 Hz -Max. AC input current 25 A 25 A 56 A 56 A 56 A Short-circuit proofMax. input power 5.75 kW 5.75 kW 12.8 kW 12.8 kW 12.8 kW -Max. efficiency 93.0 % 93.6 % 94.5 % 95.0 % 95.0 % -Battery voltage (range) 12 V (10.2 - 15.6 V) 24 V (16.8 - 31.5 V) 24 V (21 - 32 V) 48 V (41 - 63 V) 48 V (41 - 63 V) -Max. battery charging current 180 A 90 A 140 A 100 A 120 A -Constant charging current 150 A 80 A 104 A 80 A 100 A -Battery capacity 100 - 10000 Ah 100 - 10000 Ah 100 - 6000 Ah 100 - 6000 Ah 100 - 10000 Ah -Charge control IUoU with

automatic full andequalising charge

IUoU withautomatic full andequalising charge




-

Ambient temperature -25 to +60 °C -25 to +60 °C -25 to +50 °C -25 to +50 °C -25 to +50 °C -25 to +50 °CProtection mode IP54 IP54 IP30 IP30 IP40 IP65Casing Aluminium Aluminium Aluminium Aluminium Aluminium AluminiumDimensions (W / H / D) 470 mm / 445 mm /

185 mm470 mm / 445 mm /185 mm

390 mm / 590 mm /245 mm

390 mm / 590 mm /245 mm

467 mm / 612 mm /235 mm

435 mm / 322 mm /213 mm

Weight 18 kg 18 kg 39 kg 39 kg 63 kg 14 kgWarranty 5 years 5 years 5 years 5 years 5 years 5 yearsNorms CE mark CE mark CE mark CE mark CE mark CE mark


...................................................................................................................................................................


101

SMA Sunny Backup Set

Solar energy even during power failureThenewSunny Backup Set fromSMAnowallowshomeowners to use their own solar system cost-effectivelyeven during a power failure to ensure power supply forkey consumers. Supplementing the PV system, this sys-tem fully automatically switches to stand-alone powersupply within a mere 50 milliseconds in the event of apower failure. Both newand existing PV systems canbefitted with the Sunny Backup Set – without adverseeffect on their efficiency.

Simple and cost-effective complete systemDue to integration of the PV system, the battery can bekept small and thus remains cost-effective, as it usuallyonly needs to bridge the night hours. The SunnyBackup Set from SMA is provided as a preconfigured,

easy-to-install set solution for outputs of 2.2 kW –

30 kW of backup power.

The advantages of the Sunny Backup Setn Pre-configured setn Small and cost-effectiven Very small switching facilityn Smaller battery dimensions due to incorporation ofthe PV system

n Energy supply and battery charging via the gridn PV efficiency remains consistently highn Automatic switching to backup supply in approxi-mately 50 ms

n Automatic disconnection unit DIN VDE 0126-1-1n 5 years SMA warranty

The new Sunny Backup 2200 is available as a complete SBUSet S package for cost-effective supply in case of powerfailure.

The Sunny Backup 5000 in the complete package, SBU SetM,L or XL, flexibly adjusts to the output.


102

Art. No. 0600355 0600356 0600357 0600358

Model SMA SBU 2200 Set S SMA SBU 5000 Set M SMA SBU 5000 Set L SMA SBU 5000 Set XLNumber and type of SunnyBackup (SBU)

1 x SBU 2200 1 x SBU 5000 3 x SBU 5000 6 x SBU 5000

Output voltage 230 V 230 V 3 x 230 V / 400 V 3 x 230 V / 400 VFrequency 50 Hz 50 Hz 50 Hz 50 HzNominal input current 20 A 25 A 3 x 44 A 3 x 160 ANominal output 4.6 kW 5.7 kW 30.0 kW 110.0 kWRated power consumer 5.7 kW 8.0 kW 44.0 kW 110.0 kWRated current consumer 25 A 35 A 3 x 63 A 3 x 160 AMax. backup power (duration /30 min / 1 min)

2.2 kW / 2.9 kW / 3.8 kW 5.0 kW / 6.5 kW / 8.4 kW 15.0 kW / 19.5 kW / 25.2 kW 30.0 kW / 39.0 kW / 50.4 kW

Rated voltage AGM battery 12 V / 24 V 12 V / 24 V 12 V / 24 V 12 V / 24 VEnergy / capacity (C10) AGMbattery

3.4 kWh / 142 Ah 6.7 kWh / 142 Ah 13.4 kWh / 284 Ah 2 x 13.4 kWh / 2 x 284 Ah

Battery packs 2 pc. 4 pc. 8 pc. 2 x 8 pc.Battery fuse / connection Included / 4 m Included / 4 m Included / 4 m Included / 4 mAmbient temperature -25 to +60 °C -25 to +60 °C -25 to +60 °C -25 to +60 °CRelative humidity 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensation 0 to 98 %, no condensationProtection mode IP54 IP65 IP65 IP65Grid monitoring Automatic disconnection unit

VDE 0126-1-1Automatic disconnection unitVDE 0126-1-1

Automatic disconnection unitVDE 0126-1-1

Automatic disconnection unitVDE 0126-1-1

Casing Aluminium Aluminium Aluminium AluminiumCompatible inverters All Sunny Boys from May 2005 All Sunny Boys from May 2005 All Sunny Boys from May 2005 All Sunny Boys from May 2005Dimensions SBU (W / H / D) 470 mm / 445 mm / 180 mm 467 mm / 612 mm / 235 mm 467 mm / 612 mm / 235 mm 467 mm / 612 mm / 235 mmDimensions switching facilityAS box (W / H / D)

200 mm / 300 mm / 120 mm 600 mm / 600 mm / 210 mm 600 mm / 760 mm / 210 mm 1000 mm / 1600 mm / 300 mm

Dimensions AGM battery perpack (W / H / D)

498 mm / 230 mm / 177 mm 498 mm / 230 mm / 177 mm 498 mm / 230 mm / 177 mm 498 mm / 230 mm / 177 mm

Weight (Sunny Backup / AS box/ AGM battery)

18 kg / 4.5 kg / 54.5 kg 63 kg / 29.0 kg / 54.5 kg 63 kg / 41.0 kg / 54.5 kg 63 kg / 180.0 kg / 54.5 kg

Generator connection Not possible Optional (8 kW) Optional (30 kW) Optional (110 kW)Warranty 5 years 5 years 5 years 5 yearsNorms CE mark, VDE 0126-1-1 CE mark, VDE 0126-1-1 CE mark, VDE 0126-1-1 CE mark, VDE 0126-1-1


...................................................................................................................................................................


103

Morningstar SureSine-300Stand-alone inverter with pure sine waveOptimum operationAn alternating voltage comparable to the normalmains supply is produced by the sine wave. On theone hand, this improves the service life of all devicesconnected to the network; on the other hand, signifi-cantly better performance of the devices is achieved.An outstanding waveform is achieved in the completeinput voltage range by the toroidal core transformer.

More outputThe high peak efficiency ensures the provision of moresolar energy for all connected devices. The heat devel-opment is also reduced. The inverter consumes 450mAunder load. If no load is present, the device automati-cally changes over to standby mode. The energy con-sumption is then reduced to one tenth and no solarenergy is wasted.

Absolute reliabilityThe SureSine-300 is perfectly protected against short-circuits, overload, too high temperatures and under-voltage by integrated protection mechanisms. Opera-tion of the device is resumed automatically after mosterrors.

Other benefits at a glancen No cooling fan, therefore no noisesn Tropicalised design; the case withstands practicallyall weather conditions

n 2 LEDs give the user information about operatingstatus and errors at any time

n Remote On/Off switch, interruption of alternatingcurrent no longer needed

n DIP switches and the possible connection to a PCenable the configuration of all parameters

SureSine-300 – The inverter with pure sine wave SureSine-300 – The connections

...................................................................................................................................................................STAND-ALONE INVERTERS 12 & 24 V...................................................................................................................................................................

104

Art. No. 0600341

Model SureSine-300 12V - 220VInput voltage 10.0 - 15.5 VMax. DC output 600 WMax. input voltage 15.5 VNominal output 300 WOutput voltage 220 / 115 V ±10 %Frequency 50 / 60 Hz ±10 %Harmonic oscillation < 4 %Max. efficiency 92 %Night-time consumption 25 - 450 mAAmbient temperature -40 to +45 °CRelative humidity 0 to 100 %, no condensationProtection mode IP20Data communication(optional)

RJ-11

Dimensions (L / W / H) 213 mm / 152 mm / 105 mmWeight 4.5 kgWarranty 2 yearsNorms CE mark

...................................................................................................................................................................12 & 24 V STAND-ALONE INVERTERS

...................................................................................................................................................................


105

Control and MeasuringInstrumentsWe produce our own monitoring and measuringinstruments and are development leaders in this area.With a simple push of a button you can measure thecurrent-voltage curve using the mobile characteristicsanalyser TRI-KA. Additionally, we offer our own heatsensors, which can measure the outside as well as themodule temperature, in order to improve the measuringresults of dataloggers.

TRITEC

SOLAR-LOG

107

TRI-KA – The mobile characteristics analyser: Noweven more efficientMobile portable measuring instrumentOn occasion of the Intersolar 2010 we present theimproved version of the TRI‑KA. The new TRI‑KA notonly identifies the current voltage curves of modulestrings, but also of individual photovoltaic modules.The I-U characteristic curve, output, short-circuit cur-rent and open-circuit voltage are recorded by a 16 bitprocessor. During each measurement the TRI‑KAadjusts the measuring range and sample rate opti-mally. The device is easily and intuitively operatedusing the menus on the colour touch screen. The char-acteristic curve measured by the TRI‑KA can be con-verted to a STC characteristic curve based on the valuesmeasured by the sensor TRI‑SEN and displayed. In addi-tion, the STC ideal characteristic curve of the manufac-turer can be displayed, due to the integrated moduledata base.

Wireless sensorWithout contact, the wireless sensor TRI‑SEN measuresthe cell temperature, the angle of inclination and theirradiation at the solar module level. The measuredvalues are wirelessly transferred directly to the main

instrument, the TRI‑KA. The reference cell for themeasuring of the irradiation can be either a monocrys-talline or a polycrystalline cell.

Evaluation softwareThe evaluation software was also completely over-hauled. The TRI‑KA software can evaluate, manageand store the measured module data on the PC. Witha few steps of the guidedWizard, themeasured data issaved to the respective customer or system directory.Further measurements of the same system can then beadded, sorted by date, and compared with the soft-ware.

Advantages in briefn Mobile portable measuring instrumentn Wireless sensorn Simple menu navigation on colour touch screenn Large measuring range: 1.0 – 1000 V and 0.1 – 15.0 An Creation of system and maintenance protocolsn Output comparison for several yearsn Simple identification of errors and faults of PV sys-tems and PV modules

The TRI‑KA characteristics analyser and the TRI‑SEN irradia-tion and temperature sensor are easy to operate and pro-vide reliable measurements.

With the evaluation software the individual strings are eval-uated and combined to individual installations. Measure-ment reports from single strings, single modules and fromthe entire systems can be printed.

...................................................................................................................................................................CONTROL AND MEASURING INSTRUMENTS Characteristics Analyser...................................................................................................................................................................

108

Art. No. 0802201

Model TRI-KA complete setIncluded in delivery 1 TRI‑KA, 1 TRI‑SEN, 1 rugged case with rubber foam padding, TRI‑KA measurement cable sets (MC3, MC4, Huber+Suhner, Tyco,

SunClix and without connectors), 1 TRI‑SEN mounting, 1 USB SD/SDHC card reader, 2 power supply units (chargeable), operatinginstructions, CD (PC user software with user guide)

Specifications

Model TRI-KA TRI-SENMeasuring I/U characteristic curve, short-circuit current, open-circuit

voltage, MPP current, MPP voltageGlobal irradiation, module temperature, angle of inclination

Calculated values STC values (short-circuit current, open-circuit voltage, MPPcurrent, MPP voltage), fill factor, MPP output, idealcharacteristic curve of module manufacturer

-

Voltage measuring range 1.0 - 1000 V (< ±1 %) -Current measuring range 0.1 - 15.0 A (< ±1 %) -Temperature measuring range - 0 - 100 °C (±3 % in relation to a black body)Irradiation measuring range - 100 - 1200 W/m² (±5 %)Measuring connection Measuring cable Non-contact measurementCharacteristic curve measuringduration

15 - 30 seconds -

Save slots for measured curves Depending on size of SD memory card (> 1000 measuredcurves with 1 GB)

-

Reference cells - 1 x monocrystalline cell, 1 x polycrystalline cellDisplay 3.2 inch colour LCD touch screen (240 x 320 pixels, RGB) B/W LC display (2-line, 16 characters)Power supply Lithium polymer accumulator, run-time app. 6 hours Lithium polymer accumulator, run-time app. 6 hoursAuto power-off Adjustable (1 - 15 minutes) -Interface 2 measuring cables to PV string, wireless connection to

TRI‑SEN, SD/SDHC memory card for PCWireless connection to TRI‑KA

Ambient temperature 0 to +50 °C 0 to +70 °CProtection mode IP20 IP20Insulation Protection class II -Measuring category CAT II 1000 V, CAT III 600 V -Dimensions (L / W / H) 210 mm / 105 mm / 41 mm 160 mm / 82 mm / 41 mmWeight 500 g 200 gWarranty 2 years 2 yearsNorms IEC/EN 61010-1, CE mark CE mark

Spare partsArt. No. Model Belongs to Art. No.0801101 TRI-KA measurement cable replacement set for MC3 08022010801102 TRI-KA measurement cable replacement set for MC4 08022010801103 TRI-KA measurement cable replacement set for Huber+Suhner 08022010801104 TRI-KA measurement cable replacement set for Tyco 08022010801110 TRI-KA measurement cable replacement set without connector 08022010802202 TRI-SEN mounting 08022010802203 TRI-KA measurement cable replacement set for SunClix 08022010802205 TRI-KA SD/SDHC card reader 08022010802206 TRI-KA SD/SDHC memory card 08022010802207 TRI-KA user software on CD 08022010802208 TRI-KA rugged case, empty 08022010802209 TRI-KA chargeable power supply unit 0802201

System requirements user software:Microsoft®Windows XP / Vista / 7; Pentium processor with a minimum of 600 MHz or similar; minimum of 256 MB memory or more; VGA graphics cardwith at least 16 bit colour depth (High Color) and a resolution of 1024 x 768 pixels; free hard disc memory of at least 500 MB; CD/DVD disc drive;keyboard; mouse; USB interface

...................................................................................................................................................................Characteristics Analyser CONTROL AND MEASURING INSTRUMENTS

...................................................................................................................................................................


109

The Solar-Log series – The monitoring system forall photovoltaic systemsState-of-the-art technologyThe devices of the Solar-Log series provide simplemon-itoring of solar systems of all types. Due to state-of-the-art technology, the operation, analysis and display ofall parameters are handled by the web browser. Andthe web browser is independent of the operating sys-tem.

Great flexibilityThe RS485 interface allows the connection and analysisof all current inverters. The Solar-Log series is a manu-facturer-independent complete solution, which pro-vides all tools for the professional monitoring andanalysis of solar systems.

Featuresn String monitoringn Monitoring of failure and performance of individualinverters

n Status and fault monitoringn Completely internet-enabled; sends messages via e-mail and SMS

n Existing broadband router can also be usedn S0 output for large displaysn S0 input for electric meter

Additional features of the Solar-Log 1000n Graphic display with touch screen for direct opera-tion

n Datalogger with 2 x RS485 for mixed operation ofinverters

n USB port for simple data transfern Connection of Solar-Log SensorBox for the recordingof environmental data

n Theft protection via detection loop

The new Solar-Log500 and Solar-Log1000 aremultilingual andcan be connected to almost any inverter during installation.

The Solar-LogTM portal offers the perfect display of all dataof a photovoltaic system.

...................................................................................................................................................................CONTROL AND MEASURING INSTRUMENTS Datalogger...................................................................................................................................................................

110

Art. No. 0802195 0802196 0802186 0802187

Model Solar-Log 200 - for 1 inverter,multi-lingual

Solar-Log 200BT - for1 inverter, Bluetooth, multi-lingual

Solar-Log 500 - for up to10 inverters, multi-lingual

Solar-Log 500BT - for up to10 inverters, SMA Bluetooth

Max. number of inverters 1 pc. 1 pc. 10 pc. 10 pc.Software configuration Flexible Flexible Flexible FlexibleRecommended max. systemsize

15 kW 15 kW 100 kW 100 kW

Max. cable length 1000 m 1000 m 1000 m -Voltage (Supply / Device) 230 V / 12 V 230 V / 12 V 230 V / 12 V 230 V / 12 VPower consumption 3 W 3 W 3 W 3 WAmbient temperature -10 to +50 °C -10 to +50 °C -10 to +50 °C -10 to +50 °CProtection mode IP20 IP20 IP20 IP20Casing Plastic Plastic Plastic PlasticDisplay - - Two-line text display with

status LEDsTwo-line text display withstatus LEDs

Interface Ethernet - RJ45 bush -10/100 MBit, 1 x RS485/RS422,max. 24 V DC, max.5 A continuous current, S0pulse input/output (acc. toDIN 43864 & 62056)

Ethernet - RJ45 bush -10/100 MBit, 1 x RS485/RS422,max. 24 V DC, max.5 A continuous current, S0pulse input/output (acc. toDIN 43864 & 62056)

Ethernet - RJ45 bush -10/100 MBit, 1 x RS485/RS422,max. 24 V DC, max.5 A continuous current, S0pulse input/output (acc. toDIN 43864 & 62056)

Ethernet - RJ45 bush -10/100 MBit, 1 x RS485/RS422,max. 24 V DC, max.5 A continuous current, S0pulse input/output (acc. toDIN 43864 & 62056),Bluetooth

Handling Via web browser Via web browser Via web browser andmembrane keyboard

Via web browser andmembrane keyboard

Data interpretation Integrated web server Integrated web server Integrated web server Integrated web serverDimensions (L / W / H) 225 mm / 285 mm / 40 mm 225 mm / 285 mm / 40 mm 225 mm / 285 mm / 40 mm 225 mm / 285 mm / 40 mmWeight 0.80 kg 0.80 kg 0.80 kg 0.80 kgWarranty 5 years 5 years 5 years 5 years

Art. No. 0802188 0802189 0802193

Model Solar-Log 1000 - for up to 100 inverters,multi-lingual

Solar-Log 1000BT - for up to100 inverters, SMA Bluetooth

Solar-Log 1000PM - for up to100 inverters, multi-lingual, PowerManager for SMA, Danfoss and Kaco

Max. number of inverters 100 pc. 100 pc. 100 pc.Software configuration Flexible Flexible FlexibleRecommended max. systemsize

1000 kW 1000 kW 1000 kW

Max. cable length 1000 m - 1000 mVoltage (Supply / Device) 230 V / 12 V 230 V / 12 V 230 V / 12 VPower consumption 3 W 3 W 3 WAmbient temperature -10 to +50 °C -10 to +50 °C -10 to +50 °CProtection mode IP20 IP20 IP20Casing Plastic Plastic PlasticDisplay Graphic display with touch screen Graphic display with touch screen Graphic display with touch screenInterface Ethernet - RJ45 bush - 10/100 MBit,

1 x RS485/RS422 and 1 x RS485, max.24 V DC, max. 5 A continuous current, S0pulse input/output (acc. to DIN 43864 &62056), alarm contact, USB port (Host),RS232 for modems

Ethernet - RJ45 bush - 10/100 MBit,1 x RS485/RS422 and 1 x RS485, max.24 V DC, max. 5 A continuous current, S0pulse input/output (acc. to DIN 43864 &62056), alarm contact, USB port (Host),RS232 for modems, Bluetooth

Ethernet - RJ45 bush - 10/100 MBit,1 x RS485/RS422 and 1 x RS485, max.24 V DC, max. 5 A continuous current, S0pulse input/output (acc. to DIN 43864 &62056), alarm contact, USB port (Host),RS232 for modems, input for ripplecontrol signal

Handling Via web browser and touch screendisplay

Via web browser and touch screendisplay

Via web browser and touch screendisplay

Data interpretation Integrated web server Integrated web server Integrated web serverDimensions (L / W / H) 225 mm / 285 mm / 40 mm 225 mm / 285 mm / 40 mm 225 mm / 285 mm / 40 mmWeight 0.80 kg 0.80 kg 0.80 kgWarranty 5 years 5 years 5 years

...................................................................................................................................................................Datalogger CONTROL AND MEASURING INSTRUMENTS

...................................................................................................................................................................


111


AccessoriesArt. No. Model Description Belongs to Art. No.0802174 Solar-Log cable set to SMA, 3 m Accessory RS485 cable 0802186, 0802187, 0802188,

0802189, 0802193, 0802195,0802196

0802176 Solar-Log cable set to Danfoss,3 m

Accessory RS485 cable 0802186, 0802187, 0802188,0802189, 0802193, 0802195,0802196

0802179 Solar-Log 1000 modem pack(home)

Accessory remote maintenance 0802188, 0802189, 0802193

0802180 Solar-Log 1000 modem pack(industry)


0802181 Solar-Log 1000 mobilecommunications pack


0802182 Solar-Log 1000 DIN rail formobile communications pack


0802190 Solar-Log SensorBox suitable for1000

Measuring irradiation and module temperature 0802188, 0802189, 0802193

0802191 Solar-Log wind sensor, accessoryfor SensorBox

Measuring wind speed 0802188, 0802189, 0802193

0802192 Solar-Log temperature sensor,accessory for SensorBox

Measuring ambient temperature 0802188, 0802189, 0802193

0802197 Solar-Log cable set to Kaco, 3 m Accessory RS485 cable 0802186, 0802187, 0802188,0802189, 0802193, 0802195,0802196

...................................................................................................................................................................CONTROL AND MEASURING INSTRUMENTS Datalogger...................................................................................................................................................................


112

Spektron irradiation sensors

The Spektron 210 and 310 are silicon sensors used formeasuring the solar irradiation. The Spektron 210 pro-vides a voltage proportionally to the intensity of thesolar irradiation. The Spektron 310 has an integratedamplifier. Therefore the sensor signal is amplified andoutput as a norm signal. The output signal ranges from0 to 10 V, 0 to 3.125 V, 0 to 150mV, and 4 to 20mA at 0to 1500 W/m².

Range of applicationn Output and operational check of thermal and pho-tovoltaic solar plants

n Controlling of shading equipment on buildingsn Instruction and training

n Sensor for control systemsn Assessment of evapotranspiration in farming

Ease of useThe Spektron can be connected directly to a voltmeteror a datalogger. The voltagemeasuredby the Spektron210 can be converted into the unit of irradiation(W/m²), using the calibration value imprinted on thesensor.

Robust casingThe Spektron can be used irrespective of the weatherconditions and under any angle of inclination.

Spektron 210: The 2-core extension cable is UV-resistant. AllSpektron devices are calibrated beneath a sun light simula-tor against a reference sensor, which has been calibrated bythe Fraunhofer ISE.

The Spektron 310 can output up to four different normsignals, due to its integrated circuit board. This board hasto be powered with 5 to 30 V DC or 12 to 30 V DC.

...................................................................................................................................................................CONTROL AND MEASURING INSTRUMENTS Sensors & Counters...................................................................................................................................................................

114

Art. No. 0802183 0802184

Model Spektron 210 Spektron 310Measuring range 0 - 1500 W/m² 0 - 1500 W/m²

Sensor type Monocrystalline cell (13 mm / 33 mm) Monocrystalline cell (33 mm / 50 mm)Sensor accuracy ±5 % annual mean ±5 % annual meanOutlet Approx. 75 mV at 1000 W/m² 4 - 20 mA or 0 - 10 V or 0 - 3.125 V or 0 - 150 mVCalibration Sun Simulator Solar Constant 1200 with reference sensor

calibrated by the ISESun Simulator Solar Constant 1200 with reference sensorcalibrated by the ISE

Design of the sensor Measuring cell laminated in novaflon and EH foil Measuring cell enclosed in glassSupply voltage - 5 - 30 V DC or 12 - 30 V DCPower consumption - Approx. 30 mWCasing Z-profiled aluminium plate, connection encapsulated Polycarbonate, UV-resistant, with PG screw jointConnection Cable 3 m, 2 x 1.0 mm² Connection terminals, 1.5 mm²

Mounting 6 mm drill hole to be fixed with screws Drill holes to be fixed with screws and backside slot to be fixedwith hose clips

Dimensions (L / W / H) 118 mm / 50 mm / 44 mm 150 mm / 80 mm / 60 mmWeight 250 g (incl. cable) 300 gWarranty 2 years 2 yearsNorms CE mark CE mark

...................................................................................................................................................................Sensors & Counters CONTROL AND MEASURING INSTRUMENTS

...................................................................................................................................................................


115

AC energy meters with pulse output

Electricity metersThe single-phase and three-phase electricity meterscan bemounted on a standardDIN rail. They all feature

a pulse output for data acquisition. If an already in-stalled meter does not have a pulse output, an opticalscanning head can be used to read the rotor disk.

The single-phase electricity meter with mechanical counter. The 3-phase electricity meter with digital display.


116

Art. No. 0800351 0800361

Model Electricity meter single-phase, DIN rail Electricity meter 3-phase, DIN railMeasuring-circuit voltage 230 V 3 x 230 VOutput S0 interface (DIN 43864) S0 interface (DIN 43864)Pulse output 2000 pulses/kWh 1000 pulses/kWhFrequency 50/60 Hz 50/60 HzMeasuring accuracy Class I Class IIRated curr. accuracy class 5 A 5 AMax. rated current 25 A 63 AAmbient temperature -20 to +55 °C -20 to +55 °CConnection Connection terminals, up to 8 mm² Connection terminals, up to 25 mm²Mounting 35 mm DIN rail, any position 35 mm DIN rail, any positionCasing Plastic, gray Plastic, grayNorms CE mark CE mark

Art. No. 0800381Model Optical scanning headApplication For scanning discs or LED countersOperating voltage 5.5 - 30 V DCMax. sampling rate 3 revolutions/secondCurrent consumption Max. 5 mAFunction check LEDProtection mode IP50Ambient temperature 0 to +60 °CConnection Cable, 4 mMounting Bonded to viewing panel of power station meterCasing Plastic, blackDimensions (W / H / D) 39 mm / 18 mm / 20 mmNorms CE mark


...................................................................................................................................................................


117

TRITEC heat sensors

TRITEC surface temperature sensor Pt1000The surface temperature sensor Pt1000 is an adhesivefoil sensor. It was designed for measurements on sur-faces and is primarily used for temperature measure-ments of solar installations.

By installing the surface temperature sensor at theback of a solar module, the module temperature canbe measured. The temperature of solar modules iscrucial for their output, because the output decreasesby 0.43%/K with increasing temperature. By monitor-ing the temperature at the solar cells, conclusions canbe drawn about the behaviour of the output curve.

TRITEC outside temperature sensor Pt1000The outside temperature sensor Pt1000 is integrated inaweather-proofmacrolone housing (IP65). Its compactdesign makes the sensor extremely flexible: it can beinstalled anywhere.

The UV-resistant plastic housing is equipped with acable entry point with PG 9 screw connections. Theconnection is established by means of a 2-pin terminalblock directly at the printed circuit board. The device issuppliedwith rawlplugs and screws for wall-mounting.

TRITEC surface temperature sensor Pt1000 TRITEC outside temperature sensor Pt1000


118

Art. No. 0802118 0802159

Model TRITEC surface temperature sensor Pt1000, 3 m withoutstamping

TRITEC outside temperature sensor Pt1000, PG 9

Measuring principle Platinum resistance wire Platinum resistance wireMeasuring range -20 to +150 °C -20 to +200 °CProtection mode IP65 IP65Connection Cable, 3 m, two-conductor connection Cable, 3 m, two-conductor connectionDimensions (W / H / D) 50 mm / 50 mm / 8 mm 52 mm / 50 mm / 32 mmCasing Injection moulded plastic with aluminium plate, incl. adhesive

tapeMacrolone housing

Warranty 2 years 2 years


...................................................................................................................................................................


119

Mounting SystemsOur mounting systems allow simple mounting forinstallations on the roof or the front and for roofintegrations. Component and profile tests provideevidence of the excellent stability under maximum snowand wind loads.

TRITEC

SCHOTT SOLAR

SOLRIF

121

TRI-STAND mounting systemFor pitched roofs, flat roofs and frontsTRI-STAND – The mounting systemThe development of the new mounting systemTRI‑STAND is based on well-founded know-how andyears of practical experience. The knowledge gainedfrom the implementation of numerous solar systemsresulted in a mounting system that is ideally suited forall applications – from small stand-alone systems tolarge grid-connected systems, on pitched and flat roofsas well as fronts.

Insertion profile TS – The aluminium profileThe insertion profile TS of the TRI‑STAND mountingsystem allows the easy, quick and thus efficient instal-lation of all popular framed solar modules. After theinsertion of the modules into the aluminium profile,the modules are held in place by their own weight andfriction. The photovoltaic modules do not need to bescrewed in.

Universal profile UP – The base profileThe universal profiles UP andUP-S are the basic profilesof the TRI‑STAND mounting system. The universal pro-file UP is used for standard systems. For applications

with great static stresses the universal profile UP-S isused. The revolutionary design of the universal profilesallows for two types of installation: the easy to installinsertion system with cross bracing and the insertionprofile TS or the cost-effective clip system with middleand end clips. – The choice is yours.

SafeClick SC – The secure connectorSafeClicks connect the universal profiles of theTRI‑STAND mounting system securely and easily withits insertion profiles. The practical design of the Safe-Click allows easy installation by simply clicking in theinsertion profiles. Drilling is not necessary.

Middle rail TS-M – The optimal reinforce-mentIn the case of horizontal module insertion and accept-ance of pressures of more than 2400 N/m², some mod-ule manufacturers specify the use of a middle support.The TRI‑STANDmiddle rail TS-M is specifically designedfor the mounting system and the ideal support for allpopular modules.

Insertion of modules into the cross bracing of profiles – thestable and installation-friendly version for pitched roofs.

The upright installation represents the more flexible andinstallation-friendly version for flat roofs, which can com-pensate for any unevenness.

...................................................................................................................................................................MOUNTING SYSTEMS On-the-Roof System...................................................................................................................................................................

122

Art. No. 1502199 1502200 1502201 1502202 1502203

Model TRI-STAND insertionprofile TS-34, 6.000 m,blank aluminium

TRI-STAND insertionprofile TS-35, 6.000 m,blank aluminium




Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofFrame thickness 34 mm 35 mm 40 mm 42 mm 46 mmModule brand (examples) SolarWorld, Isofoton,

Naps Systems, SolartecSanyo, Solarfabrik,Würth Solar, CanadianSolar, DAY4 Energy, GEEnergy, MitsubishiHeavy Industries,Solara, Solarfun Power,Suntech Power,Viessmann

Isofoton, Topsolar,Bisol, Canadian Solar,Kaneka, MSK, Siliken

Kaneka, Five StarEnergy, IbersolarEnergia, MDTtechnologies, ScheutenSolar Technology, Solon

Kyocera, Sharp,Sunpower, Chaori,Kaneka, MitsubishiElectric, MSK, SanyoElectric, ShanghaiChaori Solar Energy,Vaillant

Max. rod length 6.00 m 6.00 m 6.00 m 6.00 m 6.00 mDimensions (L / W / H) * 1000 mm / 54 mm /

50 mm1000 mm / 54 mm /51 mm

1000 mm / 54 mm /56 mm

1000 mm / 54 mm /58 mm

1000 mm / 54 mm /62 mm

Weight * 1.1 kg 1.1 kg 1.2 kg 1.2 kg 1.2 kg

Art. No. 1502204 1502205 1502206 1502207 1502208

Model TRI-STAND insertionprofile TS-50, 6.000 m,blank aluminium

TRI-STAND insertionprofile TS-34, 6.000 m,black




Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofFrame thickness 50 mm 34 mm 35 mm 40 mm 42 mmModule brand (examples) Schott, Yingli, Aleo, BP

Solar, Unisolar, Eging,Advent Solar, AleoSolar, Atersa, MDTtechnologies, Solara,Solarfabrik, Solarwatt,Sunlink PV, SuntechPower, SunwaysPhotovoltaic, Vaillant,Viessmann

SolarWorld, Isofoton,Naps Systems, Solartec

Sanyo, Solarfabrik,Würth Solar, CanadianSolar, DAY4 Energy, GEEnergy, MitsubishiHeavy Industries,Solara, Solarfun Power,Suntech Power,Viessmann

Isofoton, Topsolar,Bisol, Canadian Solar,Kaneka, MSK, Siliken

Kaneka, Five StarEnergy, IbersolarEnergia, MDTtechnologies, ScheutenSolar Technology, Solon


66 mm1000 mm / 54 mm /50 mm

1000 mm / 54 mm /51 mm

1000 mm / 54 mm /56 mm

1000 mm / 54 mm /58 mm



...................................................................................................................................................................On-the-Roof System MOUNTING SYSTEMS

...................................................................................................................................................................


123

Art. No. 1502209 1502210 1502211 1502212 1502213

Model TRI-STAND insertionprofile TS-46, 6.000 m,black


TRI-STAND middle railTS-M, 6.000 m

TRI-STAND universalprofile UP, 6.000 m

TRI-STAND universalprofile UP-S, 6.000 m

Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched roof Pitched and flat roofFrame thickness 46 mm 50 mm Any Any AnyModule brand (examples) Kyocera, Sharp,

Sunpower, Chaori,Kaneka, MitsubishiElectric, MSK, SanyoElectric, ShanghaiChaori Solar Energy,Vaillant

Schott, Yingli, Aleo, BPSolar, Unisolar, Eging,Advent Solar, AleoSolar, Atersa, MDTtechnologies, Solara,Solarfabrik, Solarwatt,Sunlink PV, SuntechPower, SunwaysPhotovoltaic, Vaillant,Viessmann

Middle rail for allTRI‑STAND insertionprofiles

Basic profile for allTRI‑STAND insertionprofiles

Basic profile for allTRI‑STAND insertionprofiles


62 mm1000 mm / 54 mm /66 mm

1000 mm / 85 mm /17 mm

1000 mm / 40 mm /41 mm

1000 mm / 70 mm /41 mm


* - Per meter

AccessoriesArt. No. 1502214 1502215 1502216 1502217 1502218

Model TRI-STAND end bracketTS-E

TRI-STAND SafeClick SC TRI-STAND insertionprofile connector TS-C

TRI-STAND universalprofile connector UP-C

TRI-STAND slide nut M8

Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofDimensions (L / W / H) 32 mm / 29 mm / 33 mm 13 mm / 45 mm / 70 mm 95 mm / 64 mm / 17 mm 120 mm / 51 mm /

41 mm32 mm / 21 mm / 9 mm

Weight 0.010 kg 0.050 kg 0.080 kg 0.130 kg 0.010 kg

Art. No. 1502219 1502222 1502223 1502224 1502225

Model TRI-STAND slide nutM10

TRI-STAND FlexFix TRI-STAND Z adapterUP-Z

TRI-STAND spacer UP-D,3 mm

TRI-STAND middle clip(34 - 40 mm), blankaluminium

Application Pitched and flat roof Flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofDimensions (L / W / H) 32 mm / 21 mm / 9 mm 65 mm / 40 mm / 35 mm 102 mm / 30 mm /

34 mm56 mm / 35 mm / 6 mm 70 mm / 35 mm / 27 mm

Weight 0.010 kg 0.150 kg 0.200 kg 0.100 kg 0.100 kg




124

Art. No. 1502226 1502227 1502228 1502229 1502230

Model TRI-STAND middle clip(41 - 50 mm), blankaluminium

TRI-STAND middle clip(34 - 40 mm), black

TRI-STAND middle clip(41 - 50 mm), black

TRI-STAND end clip34 mm, blankaluminium

TRI-STAND end clip35 mm, blankaluminium

Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofDimensions (L / W / H) 70 mm / 35 mm / 27 mm 70 mm / 35 mm / 27 mm 70 mm / 35 mm / 27 mm 50 mm / 34 mm / 27 mm 50 mm / 35 mm / 27 mmWeight 0.100 kg 0.100 kg 0.100 kg 0.040 kg 0.040 kg

Art. No. 1502233 1502234 1502235 1502236

Model TRI-STAND end clip 40 mm,blank aluminium

TRI-STAND end clip 42 mm,blank aluminium



Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched and flat roofDimensions (L / W / H) 50 mm / 40 mm / 27 mm 50 mm / 42 mm / 27 mm 50 mm / 46 mm / 27 mm 50 mm / 50 mm / 27 mmWeight 0.040 kg 0.040 kg 0.040 kg 0.040 kg

Art. No. 1502237 1502238 1502241 1502242

Model TRI-STAND end clip 34 mm,black

TRI-STAND end clip 35 mm,black




Art. No. 1502243 1502244 1502245 1502246

Model TRI-STAND end clip 46 mm,black


TRI-STAND cross cable clipblock UP-K

TRI-STAND edge clip TS-EC


TRI-STAND has successfully passed the TÜV tests.Patent applications have been filed for SafeClick and FlexFix.

Other TRI-STAND profile types upon request.


...................................................................................................................................................................


125

TRI-STAND mounting accessories

Roof hooksFor the assembly of substructures first fastenings mustbe installed at the appropriate grid spacings. On tiledroofs, the roof hooks are attached either directly to therafter or to distance battens above the rafter. Roofhooks are available for almost any type of tile andare secured by means of seating bolts.

Roof fold clampsIn the case of plate fold roofs, the clamps are installeddirectly at the fold. The clamps consist of two stainlesssteel metal sheets, which are bolted together. The rooffold clamps are available in a round version, especiallyfor Kalzip roofs. The substructure can be mounted onthe clamps, without disturbing the roof surface.

Hanger boltsFor the installation on a corrugated roof type, theexisting screws are replaced by hanger bolts. Thissecures the corrugated roof, and at the same timethe hanger bolts can be used for the installation ofthe substructure. This provides the base for the instal-lation with a minimum of time and effort.

Renosol platesFor flat roofs, generally Renosol plates are used. Thegravel is removed from the required flat roof area, aprotective mat or fleece is laid and the Renosol plate isplaced on this. Then the TRI‑STAND profiles UP and UP-S can be riveted directly to the Renosol plate. Finally,the Renosol plates must be weighed down again withgravel, in order to meet the static requirements.

As standard, roof hooks are available in fixed or once adjust-able versions and are suited to almost any type of tile.

Using plate fold clamps, the TRI‑STAND profiles can beattached to the plate fold roof directly.


126

Art. No. 1502247 1502248 1502249 1502305 1502306

Model TRI-STAND bracket 90°,without screw

TRI-STAND bracket110°, without screw




Application Flat roof and buildingexterior

Flat roof and buildingexterior




Art. No. 1502308 1502250 1502251 1502252 1502253

Model TRI-STAND flatconnector, forstiffening

TRI-STAND SafeClickbasic element

TRI-STAND lens headscrew M8x25 A2

TRI-STAND retainingwasher M8x25 A2

TRI-STAND round-headscrew M10x30 A2

Application Flat roof and buildingexterior

Pitched roof, flat roofand building exterior




Art. No. 1502278 1502254 1502255 1502256 1502280

Model TRI-STAND round-headscrew M10x50 A2

TRI-STAND self-lockingnut with serratedbearing surface M10 A4

TRI-STAND hammer-head screw M10x30 A2

TRI-STAND hexagonbolt M10x25 A2

TRI-STAND cable tiepliers

Application Pitched roof, flat roofand building exterior





Art. No. 1502257 1502258 1502259 1502260 1502279

Model TRI-STAND Renosolplate 800x600x35

TRI-STAND Peel rivetincl. washer, M8 73x6.3

TRI-STAND Peel rivetwithout washer, M873x6.3

TRI-STAND washer M823x8.4, for Peel rivet

TRI-STAND rivet gun

Application Flat roof Flat roof Flat roof Flat roof Flat roof

Art. No. 1502261 1502264 1502265 1502266 1502267

Model TRI-STAND hanger boltM12x250

TRI-STAND hanger boltM12x300

TRI-STAND hanger boltM12x350

TRI-STAND roof hookfixed

TRI-STAND roof hookonce variable

Application Pitched and flat roof Pitched and flat roof Pitched and flat roof Pitched roof Pitched roof



...................................................................................................................................................................


127

Art. No. 1502270 1502271 1502272 1502273

Model TRI-STAND crown tile roofhook fixed

TRI-STAND crown tile roofhook once variable

TRI-STAND slate roof hookfixed

TRI-STAND slate roof hookonce variable

Application Pitched roof Pitched roof Pitched roof Pitched roof

Art. No. 1502274 1502275 1502276 1502277

Model TRI-STAND trapezoidal plateshoe, with bracket, M10

TRI-STAND fold clamp forplate fold roof, M10

TRI-STAND fold clamp forKalzip roof, M10

TRI-STAND Zambelli clamp forRibroof


Art. No. 1502281 1502282 1502283 1502284

Model TRI-STAND seating bolt 8.0x80 TRI-STAND seating bolt8.0x120

TRI-STAND seating bolt8.0x160

TRI-STAND seating bolt8.0x200


The hanger bolts are available in different lengths to allowthe perfect alignment with the existing corrugated roofshape.

The Renosol plates are used for installations on flat roofsand weighed down with gravel for example.



128

TRI-VENT mounting systemFor trapezoidal sheet roofsThe mounting systemThe development of the TRI‑VENT mounting systemparticularly emphasised great flexibility, good installa-tion features and great safety. The system was specif-ically designed for the installation of solar systems ontrapezoidal sheet roofs and combines the above bene-fits into a professional solution.

Greatest flexibilityThe different components of the system allow theinstallation on almost any trapezoidal roof. Due tothe TRI‑VENT support profiles with their differentlengths and several drill holes at intervals of 90 mmto 350 mm, the system can be used for all roof types.The two versions of the TRI‑VENT module armaturescan accommodate modules with frame strengths of35 mm, 40 mm, 46 mm and 50 mm. Additionally, thesystem allows for the solar modules to be installedvertically and horizontally.

Extremely easy installationThe complete system can be installed on the roof assimply as possible and with a minimum number oftools. Having measured the roof and drilled the holes,the TRI‑VENT support profiles are riveted to the roof.Then the modules are inserted, followed by the mod-ule armatures, and then they are secured at the end ofeach row, using the TRI‑VENT bending tool. Tiresomescrewing in is completely dispensed with. The shortprofiles and easy-to-handle components enable thesimple and easy transport of the system to and ontothe roof, thus saving energy, time and money.

Best safetyThe system, designed for wind and snow loads, pro-vides best stability and safety even in extremeweatherconditions. Each module is secured against slippingwith the TRI‑VENT retaining rings of the mountingsystem. The support profiles, bent with the TRI‑VENTbending tool, give additional stability to the systemand prevent the slipping of all modules.

The TRI‑VENT support profiles are only riveted to the roof atthe points required by the module installation.

The few components of the TRI‑VENT mounting systemenable the easy, quick and safe installation.

...................................................................................................................................................................MOUNTING SYSTEMS Trapezoidal Sheet System...................................................................................................................................................................

130

Art. No. 1502360 1502361 1502362 1502363 1502364

Model TRI-VENT end modulearmature (35 and46 mm)

TRI-VENT end modulearmature (40 and50 mm)

TRI-VENT middlemodule armature (35and 46 mm)

TRI-VENT middlemodule armature (40and 50 mm)

TRI-VENT modulearmature plate (endand middle)

Frame thickness 35 / 46 mm 40 / 50 mm 35 / 46 mm 40 / 50 mm -Module brand (examples) Sanyo, Solarfabrik,

Würth Solar, CanadianSolar, DAY4 Energy, GEEnergy, MitsubishiHeavy Industries,Solara, Solarfun Power,Suntech Power,Viessmann, Kyocera,Sharp, Sunpower,Chaori, Kaneka,Mitsubishi Electric,MSK, Sanyo Electric,Shanghai Chaori SolarEnergy, Vaillant

Isofoton, Topsolar,Bisol, Canadian Solar,Kaneka, MSK, SilikenSchott, Yingli, Aleo, BPSolar, Unisolar, EGing,Advent Solar, AleoSolar, Atersa, MDTtechnologies, Solara,Solarfabrik, Solarwatt,Sunlink PV, SuntechPower, SunwaysPhotovoltaic, Vaillant,Viessmann

Sanyo, Solarfabrik,Würth Solar, CanadianSolar, DAY4 Energy, GEEnergy, MitsubishiHeavy Industries,Solara, Solarfun Power,Suntech Power,Viessmann, Kyocera,Sharp, Sunpower,Chaori, Kaneka,Mitsubishi Electric,MSK, Sanyo Electric,Shanghai Chaori SolarEnergy, Vaillant

Isofoton, Topsolar,Bisol, Canadian Solar,Kaneka, MSK, SilikenSchott, Yingli, Aleo, BPSolar, Unisolar, EGing,Advent Solar, AleoSolar, Atersa, MDTtechnologies, Solara,Solarfabrik, Solarwatt,Sunlink PV, SuntechPower, SunwaysPhotovoltaic, Vaillant,Viessmann

All framed modules

Dimensions (L / W / H) 50 mm / 30 mm / 30 mm 60 mm / 30 mm / 30 mm 50 mm / 20 mm / 20 mm 60 mm / 20 mm / 20 mm 50 mm / 40 mm / 30 mmWeight 0.040 kg 0.040 kg 0.026 kg 0.026 kg 0.016 kgApplication Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof

Art. No. 1502365 1502366 1502367 1502368 1502369

Model TRI-VENT supportprofile 070

TRI-VENT supportprofile 090 - 150




Frame thickness - - - - -Module brand (examples) All framed modules All framed modules All framed modules All framed modules All framed modulesDimensions (L / W / H) 100 mm / 60 mm /

30 mm230 mm / 60 mm /30 mm

320 mm / 60 mm /30 mm

385 mm / 60 mm /30 mm

430 mm / 60 mm /30 mm

Weight 0.077 kg 0.177 kg 0.246 kg 0.289 kg 0.331 kgApplication Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof

Art. No. 1502370 1502371 1502372 1502378

Model TRI-VENT rubber seal (2 persupport profile)

TRI-VENT sealing rivets (2 persupport profile)

TRI-VENT retaining rings (2 permodule)

TRI-VENT edge clip

Frame thickness - - - -Module brand (examples) All framed modules All framed modules All framed modules All framed modulesDimensions (L / W / H) 30 mm / 20 mm / 1 mm 50 mm / 5 mm / 5 mm 30 mm / 30 mm / 2 mm 18 mm / 15 mm / 11 mmWeight 0.002 kg 0.004 kg 0.010 kg 0.001 kgApplication Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof Trapezoidal sheet roof

AccessoriesArt. No. Model Description Dimensions (L / W / H) Weight1502373 TRI-VENT drilling gauge For the measuring of the

TRI‑VENT system2000 mm / 1000 mm / 100 mm 2.5 kg (approx.)

1502374 TRI-VENT bending tool Special tool for horizontalfixing

300 mm / 30 mm / 30 mm 0.5 kg (approx.)

1502379 TRI-VENT riveting machinePowerBird, (rivet 6.3 mm)

TRI‑VENT accessories, rivetdiameter 6.3 mm

500 mm / 500 mm / 100 mm 4.2 kg (approx.)

1502408 TRI-VENT PowerBirdrechargeable battery 12V 2A

TRI‑VENT accessories, rivetdiameter 6.3 mm

100 mm / 100 mm / 100 mm 1.2 kg (approx.)

...................................................................................................................................................................Trapezoidal Sheet System MOUNTING SYSTEMS

...................................................................................................................................................................


131

Schott InDaXThe in-roof systemPerfect installation featuresDue to the low system weight and minimised numberof components, the installation of the Schott InDaXsystem is extremely easy and efficient. This is also sup-ported by the flexible installation sequence. Unevenareas in the roof can simply be compensated for bymeans of the separate rain gutters between the mod-ules.

Perfect aesthetics, maximum energy yieldsThe perfect visual appearance of the InDaX system isnot only due to the classy black module frame, but alsoto its low overall height. The system integrates per-fectly into the roof surface and therefore meets thehighest architectural demands. In addition, the ar-rangement of the modules in a shingled array andthe specifically developed frame provide optimumrear-ventilation of the modules and thus ensure opti-mum energy yields.

Optimum safetyDesigned for roof slopes of 12 to 65 degrees, the SchottInDaX system provides absolute rain proofing. In spe-cial wind tunnel tests, the system was successfullytested for wind and rain combinations with windspeeds of up to 130 km/h. The system replaces conven-tional roof coverings and assumes all protection func-tions against wind load, snow load, precipitation, fly-ing sparks and radiating heat. All InDaX modules areapproved for surface loads of up to 550 kg/m².

Advantages in briefn Easy installationn Replaces the roof coveringn Perfect aestheticsn Maximum energy yieldsn Tested rain proofing

The Schott InDaX system integrates perfectly into the roof,due to the special frame.

Easy and quick installation is ensured by the minimum num-ber of components and the low system weight.

...................................................................................................................................................................MOUNTING SYSTEMS Roof-integrated System...................................................................................................................................................................

132

Art. No. 0101205 0101206

Model Schott InDaX 214 Schott InDaX 225Nominal power ≥ 214 W ±4 % ≥ 225 W ±4 %Max. system voltage 1000 V 1000 VOperating voltage 29.5 V ±10 % 29.8 V ±10 %Operating current 7.26 A ±10 % 7.55 A ±10 %Open circuit voltage 36.3 V ±10 % 36.7 V ±10 %Short circuit current 8.04 A ±10 % 8.24 A ±10 %Temp. coefficient power -0.43 %/K -0.43 %/KTemp. coefficient voltage -0.33 %/K -0.33 %/KTemp. coefficient current 0.05 %/K 0.05 %/KOperating moduletemperature

-40 to +85 °C -40 to +85 °C

Reverse current load Don't apply external voltages in excess of Uoc to the module Don't apply external voltages in excess of Uoc to the moduleCells per module 60 pc. 60 pc.Cell type MAIN-Iso (polycrystalline silicon) MAIN-Iso (polycrystalline silicon)Cell dimensions (L / W) 156 mm / 156 mm 156 mm / 156 mmConnection Tyco connectors, length per pole 1.1 m Tyco connectors, length per pole 1.1 mMounting frame Black anodized aluminium Black anodized aluminiumDimensions (L / W / H) 1769 mm / 999 mm / 75 mm 1769 mm / 999 mm / 75 mmWeight 24 kg 24 kgMax. load 5400 N/m² 5400 N/m²Performance warranty * 10 / 25 years 10 / 25 yearsProduct warranty 5 years 5 yearsNorms IEC 61215 ed. 2, IEC 61730, DIN EN 15601, DIN EN 1187 pt. 1

and 2, protection class II, CE markIEC 61215 ed. 2, IEC 61730, DIN EN 15601, DIN EN 1187 pt. 1and 2, protection class II, CE mark


AccessoriesArt. No. Model Description1502449 Schott InDaX basic set (2x2 modules) InDaX installation accessory (basic set)1502450 Schott InDaX add-on set horizontal InDaX installation accessory (roof ridge - eaves)1502451 Schott InDaX add-on set vertical InDaX installation accessory (side add-on sheets)1502452 Schott InDaX module drainage set InDaX installation accessory (2 rain gutters)1502453 Schott InDaX roof ridge fastening InDaX installation accessory



...................................................................................................................................................................Roof-integrated System MOUNTING SYSTEMS

...................................................................................................................................................................


133

SolrifThe solar roof intergration

Versatile and flexibleSolrif is suited tonumerous types of sloping roofs. It canbe used to cover a roof completely, resulting in areduction of the conventional tile covering. Since theirmarket launch in 1999, installations with a total outputof several MWp have been erected. This success isguaranteed by the long years of experience and theversatile applicability.

Installation – simple and fastThe modules can be installed simply and quickly – theyare based on the same principle as laying roof tiles: Thesections interlock horizontally, giving plenty of verticalplay. They are held in place by metal stirrups fixed tothe roof battens. This configuration allows each Solrifmodule to be individually removed and replaced. Thesections are specially designed to let snow slide offeasily and rainwater to run off quickly – so that thesolar cells always generate the maximum amount ofpower.

Aesthetics and optimum operating per-formanceThe Solrif Roof Integration System achieves both ahigh-quality architectonic photovoltaic installationand an efficient electrical operating performance.The Solrif profiles can be combined with various roof-ing materials. The low profile height of the framesresults in a good rear ventilation of the solar laminates.In 2006 a Solrif installation with 110 kWp on an agri-cultural building won the Swiss and European SolarPrize, thanks to the superior design and high output.

Tested qualityAlready in September 2005, Solrif was awarded theTÜV certificate – after inspection of themanufacturingfacilities and review of the order processing – TÜVdot-COM-ID 7095. Since the award of the testmark the TÜVRheinland carries out regular manufacturing controls.Solrif has furthermore been testedwith laminatemod-ules of various manufacturers by the TÜV Rheinlandaccording to IEC 61215 and has passed these tests inaccordance with the generally accepted standards.

The efficient Solrif roof integration system offers a perfectdesign in combination with optimum everyday protection.

Two interlocking frame profiles are fit into a clamp on thelower side and fastened at the upper edge to the nextmodule row.

...................................................................................................................................................................MOUNTING SYSTEMS Roof-integrated System...................................................................................................................................................................

134

Art. No. 0101204 0101203 0101202Model Solrif framed FD135GH-2P with cable +

MC3Solrif framed Romag SMT6(48)P 180W Solrif framed Romag SMT6(48)P 185W

For laminate FD135GH-2P (1499 x 708 x 25 mm) Romag SMT6(48)P 180W (1312 x 988 x4.6 mm)

Romag SMT6(48)P 185W (1312 x 988 x4.6 mm)

Roof slope 15 - 70°, below 25° with underlay foil 15 - 70°, below 25° with underlay foil 15 - 70°, below 25° with underlay foilWood substructure Analogous to a tiled roof Analogous to a tiled roof Analogous to a tiled roofNorms IEC 61215-1-1, IEC 61024-1, TÜVdotCOM-

ID: 0000007095IEC 61215-1-1, IEC 61024-1, TÜVdotCOM-ID: 0000007095

IEC 61215-1-1, IEC 61024-1, TÜVdotCOM-ID: 0000007095

AccessoriesArt. No. Model Description1502427 Solrif ridge plate left, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502428 Solrif ridge plate right, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502429 Solrif ridge plate center, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502430 Solrif side plate above left, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502431 Solrif side plate above right, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502432 Solrif side plate left, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502433 Solrif side plate right, bk, for FD135GH-2P Edge connection plate for FD135GH-2P1502434 Solrif edge connection profile left for FD135GH-2P Edge connection profile for FD135GH-2P1502435 Solrif edge connection profile right for FD135GH-2P Edge connection profile for FD135GH-2P1502437 Solrif ridge plate left, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502438 Solrif ridge plate right, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502439 Solrif ridge plate center, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502440 Solrif side plate above left, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502441 Solrif side plate above right, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502442 Solrif side plate left, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502443 Solrif side plate right, bk, for SMT6(48)P Edge connection plate for Romag SMT6(48)P 180/185W1502444 Solrif edge connection profile left for SMT6(48)P Edge connection profile for Romag SMT6(48)P 180/185W1502445 Solrif edge connection profile right for SMT6(48)P Edge connection profile for Romag SMT6(48)P 180/185W1502447 Solrif bracket profile 2.0 mm, black Solrif roof mounting component1502448 Solrif bracket glass 2.0 mm, black Solrif roof mounting component1502098 Solrif bracket above 2.0 mm Solrif roof mounting component1502111 Solrif gum joint cover, l = 30 cm Siding sealing for the joint of 2 ridge plates1502112 Solrif metal bracket for all plates per 2 pcs. Fastening of plates to battens1502113 Solrif roof valley sealing strip, l = 100 cm Bottom sealing of the complete generator width

...................................................................................................................................................................Roof-integrated System MOUNTING SYSTEMS

...................................................................................................................................................................


135

AccessoriesOur accessories include flexible cables particularly suitedfor solar systems. The cables are extremely robust,mechanically resistant, free of halogen as well as UV- andweather-resistant. In addition, our range of accessoriesincludes any item needed for the assembly andmaintenance of solar systems.

DRAKA

HUBER+SUHNER

STUDER

MULTI-CONTACT

TYCO

RENNSTEIG

PHOENIX CONTACT

137

Drakaflex Sun BetaxThe halogen-free solar cableBest qualityDrakaflex Sun Betax solar cables are specifically de-signed and manufactured for use in solar applications.They satisfy with their reliability, excellent life-cycleand optimal physical qualities. All cables are testedand certified according to established internationaltesting methods and meet the highest demands.

UseDrakaflex Sun Betax solar cables have been developedfor use outdoors. Equally, they can be used indoors.They are used to connect two solarmodules (cable run),solar modules and inverters (sub-array run) or as maindirect current line.

FeaturesDrakaflex Sun Betax solar cables satisfy with their out-standing product qualities. The used materials are

flame-retardant, do not contain halogen componentsand do not generate corrosive gases in case of fire, butonly a little smoke. The used materials do not containattractants for martens and are resistant against am-monia. The jacket is separated from the insulation andtherefore easier to strip off. The cables are compatiblewith all major connector systems.

Advantages in briefn Resistant against ozone, UV and weathern Halogen-freen Flame-retardantn Microbe-resistantn Reduced diametern Life expectation of more than 30 yearsn Oil-resistantn Ecologically safe – fulfill the RoHS directive2002/95/EG

Drakaflex Sun Betax resist flames, ozone and weather. The practical 500 m drum.

...................................................................................................................................................................ACCESSORIES Solar Cable...................................................................................................................................................................

138

Art. No. 1302191 1302192 1302193 1302194 1302195 1302196

Model Draka Sun Betax125, 4 rd, 500 mdrum

Draka Sun Betax125, 4 bu, 500 mdrum

Draka Sun Betax125, 4 bk, 500 mdrum

Draka Sun Betax125, 6 rd, 500 mdrum

Draka Sun Betax125, 6 bu, 500 mdrum

Draka Sun Betax125, 6 bk, 500 mdrum

Cross section 4.0 mm² 4.0 mm² 4.0 mm² 6.0 mm² 6.0 mm² 6.0 mm²

Colour Red Blue Black Red Blue BlackCable diameter 5.5 mm ±0.2 mm 5.5 mm ±0.2 mm 5.5 mm ±0.2 mm 6.4 mm ±0.2 mm 6.4 mm ±0.2 mm 6.4 mm ±0.2 mmRated voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCMin. bending radius 5 x diameter

(flexing), 4 xdiameter (fixed)

5 x diameter(flexing), 4 xdiameter (fixed)





Temperature range -40 to +90 °C -40 to +90 °C -40 to +90 °C -40 to +90 °C -40 to +90 °C -40 to +90 °CShort-circuit-resistant up totemperature of *

218 A 218 A 218 A 327 A 327 A 327 A

Conductor Tinned flexiblecopper lead, fine-wire

Tinned flexiblecopper lead, fine-wire





Insulation Betax 125 Betax 125 Betax 125 Betax 125 Betax 125 Betax 125Weight ** 6.1 kg 6.1 kg 6.1 kg 8.7 kg 8.7 kg 8.7 kgWarranty 2 years 2 years 2 years 2 years 2 years 2 yearsNorms IEC 60228, class 5,

“TÜV typeapproved” certifi-cate no. R 60023299

IEC 60228, class 5,“TÜV typeapproved” certifi-cate no. R 60023299





* - Short-circuit temperature 200 °C, conductor temperature 90 °C, duration of short-circuit 5 seconds

** - Nominal kg/100 m

...................................................................................................................................................................Solar Cable ACCESSORIES

...................................................................................................................................................................


139

Radox solar cables – UV-resistant, halogen-freeand extremely rugged

Radox solar cables are flexible single-core and multi-core cables specifically suitable for the wiring of solarinstallations both inside buildings and outside.

Long service lifeThe cables are extremely rugged, feature an extremelyhigh mechanical resistance and are extremely resistantto heat, low temperature, oil, abrasion, UV, ozone andweathering. These properties guarantee a long servicelife. All these properties are achieved with small out-side diameters thanks to Radox technology and highprecision.

Absolutely no shrinkageThe cables are easy to process owing to the close man-ufacturing tolerances. The electron beam-crosslinked

material displays absolutely no shrinkage and abso-lutely no other changes over time. This is of advantageparticularly for coating and potting and for fittingconnectors. Even at high temperatures, the electronbeam-crosslinked material does not melt or flow.Nevertheless, the insulation can be stripped easilyfrom the cables.

The fact that the material contains no halogens meansthat no corrosive or toxic gases are produced and littlesmoke is generated in the event of a fire. The cableinsulation is flame-retardant and can consequently notcatch fire of its own accord.

3 2 11 2 3

Radox solar cables – used successfully worldwide for manyyears now. Operating temperature range -40 to +120°C,short-circuit-resistant up to temperatures of +280°C.

Radox single-core solar cable1) Conductor: Tinned flexible copper lead, fine-wire2) Insulation: Radox black3) Jacket: Radox, colours see technical data


140

Art. No. 1302175 1302178 1302176 1302179 1302177

Model Radox solar cable 4 rd,100 m drum

Radox solar cable 4 rd,500 m drum

Radox solar cable 4 bu,100 m drum

Radox solar cable 4 bu,500 m drum

Radox solar cable 4 bk,100 m drum

Cross section 4.0 mm² 4.0 mm² 4.0 mm² 4.0 mm² 4.0 mm²

Colour Red Red Blue Blue BlackCable diameter 5.8 mm ±0.15 mm 5.8 mm ±0.15 mm 5.8 mm ±0.15 mm 5.8 mm ±0.15 mm 5.8 mm ±0.15 mmRated voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DC 1000 V DCMin. bending radius 4 x diameter 4 x diameter 4 x diameter 4 x diameter 4 x diameterTemperature range -40 to +120 °C -40 to +120 °C -40 to +120 °C -40 to +120 °C -40 to +120 °CShort-circuit-resistant up totemperature of

+280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds)

Conductor Tinned flexible copperlead, fine-wire

Tinned flexible copperlead, fine-wire




Insulation Radox black Radox black Radox black Radox black Radox blackWeight * 6.6 kg 6.6 kg 6.6 kg 6.6 kg 6.6 kgWarranty 15 years 15 years 15 years 15 years 15 yearsNorms IEC 60228, class 5, “TÜV

type approved”certificate no. R02210086

IEC 60228, class 5, “TÜVtype approved”certificate no. R02210086




Art. No. 1302180 1302181 1302184 1302182

Model Radox solar cable 4 bk, 500 mdrum

Radox solar cable 6 rd, 100 mdrum

Radox solar cable 6 rd, 500 mdrum

Radox solar cable 6 bu, 100 mdrum

Cross section 4.0 mm² 6.0 mm² 6.0 mm² 6.0 mm²

Colour Black Red Red BlueCable diameter 5.8 mm ±0.15 mm 6.9 mm ±0.20 mm 6.9 mm ±0.20 mm 6.9 mm ±0.20 mmRated voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCMin. bending radius 4 x diameter 4 x diameter 4 x diameter 4 x diameterTemperature range -40 to +120 °C -40 to +120 °C -40 to +120 °C -40 to +120 °CShort-circuit-resistant up totemperature of

+280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds)

Conductor Tinned flexible copper lead,fine-wire

Tinned flexible copper lead,fine-wire



Insulation Radox black Radox black Radox black Radox blackWeight * 6.6 kg 9.2 kg 9.2 kg 9.2 kgWarranty 15 years 15 years 15 years 15 yearsNorms IEC 60228, class 5, “TÜV type

approved” certificate no. R02210086

IEC 60228, class 5, “TÜV typeapproved” certificate no. R02210086





...................................................................................................................................................................


141

Art. No. 1302185 1302183 1302186 1301323

Model Radox solar cable 6 bu, 500 mdrum

Radox solar cable 6 bk, 100 mdrum

Radox solar cable 6 bk, 500 mdrum

Radox solar cable 10 bk

Cross section 6.0 mm² 6.0 mm² 6.0 mm² 10.0 mm²

Colour Blue Black Black BlackCable diameter 6.9 mm ±0.20 mm 6.9 mm ±0.20 mm 6.9 mm ±0.20 mm 8.1 mm ±0.15 mmRated voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCMin. bending radius 4 x diameter 4 x diameter 4 x diameter 6 x diameterTemperature range -40 to +120 °C -40 to +120 °C -40 to +120 °C -40 to +120 °CShort-circuit-resistant up totemperature of

+280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds) +280 °C (max. 5 seconds)

Conductor Tinned flexible copper lead,fine-wire




Insulation Radox black Radox black Radox black Radox blackWeight * 9.2 kg 9.2 kg 9.2 kg 14.4 kgWarranty 15 years 15 years 15 years 15 yearsNorms IEC 60228, class 5, “TÜV type

approved” certificate no. R02210086



IEC 60228, class 5

* - Nominal kg/100 m



142

Studer Betaflam SolarInnovative solar cables

Leoni Studer AG – Internationally provenWithmore than34,000 employees in over 100 locationsin 30 countries, the company is one of the leadingmanufacturers of cables, conduits and grid systems.The business unit "Wind and Solar Power" contributesto a high-quality broad cable range for the sectorsindustry, infrastructure and energy. It produces cablesand for these develops and processes superior com-pounds for conductor insulation. Leoni Studer AG ispart of the internationally active Leoni Group andrepresents highest quality and innovative technology.

Best featuresLong life-cycle and optimumweather resistance –withthese features, Leoni Studer solar cables meet allrequirements made of solar systems and their compo-nents. The double-insulated, electron beam cross-linked cablesmeet the highest standards of solar cables

and can unreservedly be used as module and connect-ing cables for stand-alone and grid-connected systems.

Safe designn Conductor: Braided copper wire, tinned, fine, class 5n Insulation: Polyolefin Copolymer electron beamcross-linked

n Jacket: Polyolefin Copolymer electron beam cross-linked

Advantages in briefn UV and ozone resistantn Hydrolysis resistantn Electron beam cross-linked compoundsn High temperature resistancen Cold flexibilityn Long life-cyclen Compatible with all major connectors

The double insulated electron beam cross-linked solar cablesof Studer are suitable for grid-connected and stand-alonesystems.

The Studer solar cables are UV and ozone resistant andsuited for a temperature range of -40 up to +85°C.


144

Art. No. 1302197 1302198

Model Studer Betaflam 125 flex, 4 mm² bk, 500 m drum Studer Betaflam 125 flex, 6 mm² bk, 500 m drumCross section 4.0 mm² 6.0 mm²

Colour Black BlackCable diameter 5.9 mm ±0.15 mm 6.8 mm ±0.15 mmRated voltage 1000 V DC 1000 V DCMin. bending radius 4 x diameter 4 x diameterTemperature range -40 to +85 °C -40 to +85 °CShort-circuit-resistant up totemperature of

+280 °C +280 °C

Conductor Tinned flexible copper lead, fine-wire Tinned flexible copper lead, fine-wireInsulation Polyolefin Copolymer electron beam cross-linked Polyolefin Copolymer electron beam cross-linkedWeight * 7.0 kg 9.7 kgWarranty 2 years 2 yearsNorms IEC 60332-1, IEC 61034, EN 50268-2, DIN 51900, TÜV PfG

1169/08.2007 PV1-FIEC 60332-1, IEC 61034, EN 50268-2, DIN 51900, TÜV PfG1169/08.2007 PV1-F

* - Nominal kg/100 m


...................................................................................................................................................................


145

Multi-Contact – MC3 and MC4 connector systems

Multi-Contact AGwas founded in 1962 and is currentlyemployingmore than 700 staff. Allmanufacturing sitesare ISO 9001-certified and therefore meet the highestquality demands.

MC connector systemsThe components of the MC connector system for pho-tovoltaics are designed to allow time-saving and safeserial and parallel wiring of PV modules for building-integrated and free-standing solar installations. Forpractical use the connector systems MC3 and MC4 areavailable, depending on the existing modules or inver-ters.

The proven MC3 connector systemsn Diameter Ø 3 mmn Rated currentmax. 30 A for 6 mm²max. 20 A for < 4 mm²

n System voltage max. 1000 Vn Degree of protection, connected IP65n Protection class IIn Temperature range ‑40°C to +90°Cn TÜV Rheinland – type approved

The interlockable MC4 connector systemsn Diameter Ø 4 mmn Rated current max. 30 An System voltage max. 1000 Vn Degree of protection, connected IP67n Easy installationn Locking system "Snap in"n Protection class IIn Temperature range ‑40°C to +90°Cn TÜV Rheinland – type approved

The MC3 plugs and sockets, shown with associated contacts. The MC4 plugs and sockets, shown with associated contacts.

...................................................................................................................................................................ACCESSORIES Plugs and Sockets...................................................................................................................................................................

146

Art. No. 1302000 1302010 1302050 1302040 1302020

Model MultiContact PV-KBT3II(A: 2 - 4 mm², D: 4.9 -7.1 mm)

MultiContact PV-KST3II(A: 2 - 4 mm², D: 4.9 -7.1 mm)

MultiContact PV-KBT3/6III (A: 6 mm², D:6.5 - 9 mm)

MultiContact PV-KST3/6III (A: 6 mm², D:6.5 - 9 mm)

MultiContact PV-KBT4/6II (A: 4 - 6 mm²,D: 5.5 - 9 mm)

Description Female type MC3 forRadox / Draka / Studer4 mm²

Male type MC3 forRadox / Draka / Studer4 mm²

Female type MC3 forRadox / Draka / Studer6 mm²

Male type MC3 forRadox / Draka / Studer6 mm²

Female type MC4 forRadox / Draka / Studer4 - 6 mm²

Art. No. 1302030 1302073 1302085 1302086 1302087

Model MultiContact PV-KST4/6II (A: 4 - 6 mm²,D: 5.5 - 9 mm)

MultiContact PV-R-WZ3 MultiContact PV-ES-CZM-19100 crimpingpliers insert

MultiContact PV-CZM-16100A crimping pliers

MultiContact PV-LOCcrimping pliers locator

Description Male type MC4 forRadox / Draka / Studer 4- 6 mm²

Installation device formale and female MC3

For MC4 (only use withlocator)

For MC3 (MC4: insertand locator necessary)

For MC4 (only use withcrimping pliers insert)

Art. No. 1302116 1302117 1302118 1302115

Model MultiContact PV-WZ-AD/GWD MultiContact PV-SSE-AD4 MultiContact PV-PST test pin MultiContact assembly key PV-MS

Description Socket wrench insert forcrimping pliers PV-CZM

Socket wrench insert forcrimping pliers PV-CZM

For MC type 4 For MC type 4

Art. No. 1302152 1302153 1302154 1302155

Model MultiContact PV branch plugMC3 PV-AZS3-UR

MultiContact PV branchsocket MC3 PV-AZB3-UR

MultiContact PV branch plugMC4 PV-AZS4

MultiContact PV branchsocket MC4 PV-AZB4

Description For MC type 3 For MC type 3 For MC type 4 For MC type 4


...................................................................................................................................................................Plugs and Sockets ACCESSORIES

...................................................................................................................................................................


147

AccessoriesArt. No. Model Description1302071 MultiContact PV-A-KBT4/KST3 Cable adapter female MC4 for male MC31302072 MultiContact PV-A-KBT3/KST4 Cable adapter female MC3 for female MC41302096 MultiContact PV-AMLB4/150 measurement line female MC4 With PV-KBT4 and security plug 4 mm, blue1302097 MultiContact PV-AMLS4/150 measurement line male MC4 With PV-KST4 and security plug 4 mm, red1302098 MultiContact PV-AMLB3/150 measurement line female MC3 With PV-KBT3 and security plug 4 mm, blue1302099 MultiContact PV-AMLS3/150 measurement line male MC3 With PV-KST3 and security plug 4 mm, red1302120 MultiContact PV-A-KBT4/Tyco male plus 4 mm² Cable adapter female MC4 for male Tyco1302121 MultiContact PV-A-KBT4/Tyco female minus 4 mm² Cable adapter female MC4 for female Tyco1302122 MultiContact PV-A-KBT4/Tyco female plus 4 mm² Cable adapter female MC4 for female Tyco1302123 MultiContact PV-A-KBT3/Tyco male minus 4 mm² Cable adapter female MC3 for male Tyco1302124 MultiContact PV-A-KBT3/Tyco male plus 4 mm² Cable adapter female MC3 for male Tyco1302125 MultiContact PV-A-KBT3/Tyco female minus 4 mm² Cable adapter female MC3 for female Tyco1302126 MultiContact PV-A-KBT3/Tyco female plus 4 mm² Cable adapter female MC3 for female Tyco1302127 MultiContact PV-A-KST4/Tyco male minus 4 mm² Cable adapter male MC4 for male Tyco1302128 MultiContact PV-A-KST4/Tyco male plus 4 mm² Cable adapter male MC4 for male Tyco1302129 MultiContact PV-A-KST4/Tyco female minus 4 mm² Cable adapter male MC4 for female Tyco1302130 MultiContact PV-A-KST4/Tyco female plus 4 mm² Cable adapter male MC4 for female Tyco1302131 MultiContact PV-A-KST3/Tyco male minus 4 mm² Cable adapter male MC3 for male Tyco1302132 MultiContact PV-A-KST3/Tyco male plus 4 mm² Cable adapter male MC3 for male Tyco1302133 MultiContact PV-A-KST3/Tyco female minus 4 mm² Cable adapter male MC3 for female Tyco1302134 MultiContact PV-A-KST3/Tyco female plus 4 mm² Cable adapter male MC3 for female Tyco

The MC3 plugs are based on contacts with a diameter of3 mm and comply with protection class IP65.

The interlockable MC4 plugs have contacts with diametersof 4 mm and comply with protection class IP67.



148

Huber+Suhner Radox ConnectorThe innovative connector system

Photovoltaic solar cables and connectors are essentialcomponents of solar installations. They ensure the elec-tric connection between the modules and the inver-ters. They play an important role for the high efficiencyand long service life of the installations. The expectedlong service life, adverse exterior environmental influ-ences and great fluctuations of temperatures andhumidity make heavy demands on design, materialand manufacture.

Solar cables and connectors combinedHuber+Suhner solar cables and connectors are per-fectly matched, have been specifically designed foruse in PV installations and have delivered optimal per-formances for many years.

Lamella contacts – The core of the connectorsHuber+Suhner's Radox solar connectors consist of cas-ing and contact element. The core of the connectorsare the lamella contacts made from high-quality cop-per beryllium. Comparable values cannot be achieved

in this form without lamella contacts. As flexible ele-ments, these contacts form themechanical adjustmentbetween plug and socket. The lamella produces alarger contact surface between the elements, thus pro-viding a higher current load capacity with lowest con-stant contact resistance. All Huber+Suhner solar con-nectors are compatible for interconnection with eachother.

Connector characteristicsn Temperature range ‑40°C to +110°Cn Max. current carrying capacity 38 An Max. system voltage 1000 Vn Constant low transition resistancen High mechanical resistancen UV- and ozone resistantn Protection mode IP67 in mated conditionn Interlockable by means of threadsn Protection class IIn TÜV approval

The interlockable Radox connectors are compatible with 4or 6 mm² Radox cables.

High-quality lamella contacts on turned contact elementswith integrated thread lock ensure high functionality andsafety.


150

Art. No. 1302143 1302144 1302145 1302146

Model Huber+Suhner Radox male4 mm²

Huber+Suhner Radox female4 mm²

Huber+Suhner Radox male6 mm²

Huber+Suhner Radox female6 mm²

Connector diameter 4 mm 4 mm 4 mm 4 mmContact carrier Brass, tin-plated Brass, tin-plated Brass, tin-plated Brass, tin-platedContact principle Copper beryllium lamella

contactCopper beryllium lamellacontact

Copper beryllium lamellacontact

Copper beryllium lamellacontact

Connectable cross-section Radox cable 4 mm² Radox cable 4 mm² Radox cable 6 mm² Radox cable 6 mm²Temperature range -40 to +110 °C -40 to +110 °C -40 to +110 °C -40 to +110 °CCurrent carrying capacity 38 A at +85 °C 38 A at +85 °C 38 A at +85 °C 38 A at +85 °CMax. system voltage 1000 V DC 1000 V DC 1000 V DC 1000 V DCContact resistance < 4 mΩ < 4 mΩ < 4 mΩ < 4 mΩProtection class Class II Class II Class II Class IIProtection mode IP67 in mated condition IP67 in mated condition IP67 in mated condition IP67 in mated conditionWarranty 2 years 2 years 2 years 2 yearsNorms DIN VDE 0126-3, TÜV-certified

R 60017637DIN VDE 0126-3, TÜV-certifiedR 60017637

DIN VDE 0126-3, TÜV-certifiedR 60017637

DIN VDE 0126-3, TÜV-certifiedR 60017637


...................................................................................................................................................................


151

Tyco Solarlok – The photovoltaic connectorsystem

With 60 years of industry expertise, Tyco Electronics is aworldwide supplier of passive electric and electroniccomponents and one of the leading manufacturers ofwiring systems for photovoltaics.

Easy and reliable interconnectionBy continuously improving and expanding the Solarlokconnector system, Tyco Electronics contributes to theestablishment of this environmentally friendly andfuture-oriented technology on the energy market.The Solarlok connector system represents the easyand reliable interconnection of individual solar mod-ules to the inverter.

The Solarlok conceptThe entire system concept is based on cost-effectiveand reliable processing of individual system compo-

nents, in order to significantly reduce the installationcosts of the whole photovoltaic system.

The Solarlok connectors – overviewn Easy processing on-siten Secure connection due to keyed housingn Mechanical interlockingn Easy multiple pluggingn Accommodates solar cables of different diametersreliably

n High current carrying capacityn High temperature stabilityn TÜV and UL certified

The Tyco Solarlok connectors in different versions for 4 and6 mm² solar cables.

With the Tyco Solarlok system the female and the male areboth available with Plus and Minus configuration.


152

Art. No. 1302102 1302103 1302104 1302105

Model Tyco Solarlok male minus4.0 mm²

Tyco Solarlok female minus4.0 mm²

Tyco Solarlok male plus4.0 mm²

Tyco Solarlok female plus4.0 mm²

Description For Radox / Draka / Studer4 mm²

For Radox / Draka / Studer4 mm²



Art. No. 1302106 1302107 1302108 1302109

Model Tyco Solarlok male minus6.0 mm²

Tyco Solarlok female minus6.0 mm²

Tyco Solarlok male plus6.0 mm²

Tyco Solarlok female plus6.0 mm²

Description For Radox / Draka / Studer6 mm²




Art. No. 1302166 1302167 1302168 1302169

Model Tyco T-connector (male/male)plus

Tyco T-connector (male/male)minus

Tyco T-connector(female/male) plus

Tyco T-connector(female/male) minus

Description Parallel connection of TycoSolarlok connectors

Parallel connection of TycoSolarlok connectors





...................................................................................................................................................................


153

AccessoriesArt. No. 1302110 1302111 1302112 1302113 1302114

Model Tyco Solarlok manualcrimping pliers

Tyco Solarlokcrimphead for 4 and6 mm²

Tyco Solarlok press-outtool

Tyco Solarlok supportprotection

Tyco Solarlok servicecase

Description Universal, withoutcrimphead

Go with Tyco Solarlokmanual crimping pliers

For dismantling ofSolarlok male/female

For all solar cables with1.5 / 2.5 / 4.0 / 6.0 mm²

100 cable coupler /crimp contacts, incl.tools

Tyco Solarlok connectors 4 mm² Tyco Solarlok connectors 6 mm²



154

Rennsteig Tools – Solar Tools for Cutting,Stripping and CrimpingRennsteig Werkzeuge GmbH – this company in thecommunity of Viernau/Thuringia (Germany) – followsa long tradition of hand tools development and man-ufacture in this region. Based on this experience theRennsteigWerkzeugeGmbH, since 1991 a subsidiary ofKnipex Werk, was founded.

Cable shearsThe forged cable shears are universally deployable forcutting, stripping and peeling of cables with diametersof up to 50 mm². The sharp, hardened blades withprecision grinding ensure easy and clean cuts, usingonly one hand. Crushing and distortion of cable con-ductors and insulation are avoided.

Insulation stripping pliersThese special pliers with length stop are perfect forhigh-quality and damage-free stripping and peeling.During stripping the cable is not crushed or distorted.The exchangeable knives allow working with cables ofdiameters of 1.5 – 6 mm² as standard. The compact

design and good handling of these pliers rest on theergonomical design of the two-component handles.

Crimping system pliersThe crimping pliers PEW 12 are recommended forcrimping of solar contacts of almost all connector sys-tems. Crimping can ensure the exact electrical connec-tion without soldering. The excellent handling, easyexchange of the crimping insert bits and the possibilityof adding a positioning aid are facts in favour of thesecrimping pliers.

Profi KitThe practical plastic case of the Profi Kit contains cableshears, stripping pliers and crimping pliers (one ofeach). Thus the Profi Kit enables almost all jobs asso-ciated with cables and connectors. As standard, theProfi Kit is equipped with crimping insert bits andlocators (positioning aids) for MC3, MC4, Tyco andYukita. Additional insert bits are available as options.

The Rennsteig Profi Kit contains cable shears, stripping pliersand crimping pliers (one of each), suitable for MC3, MC4,Tyco and Yukita.

The Rennsteig crimping pliers PEW 12 are suited for variousconnector systems, due to their different crimping insertbits.

...................................................................................................................................................................ACCESSORIES Fitting Tool...................................................................................................................................................................

156

Art. No. 1302150 1302149 1302135 1302142

Model Rennsteig cable shears D15(1.5 - 50 mm²)

Rennsteig stripping pliers (1.5 -6 mm²)

Rennsteig crimping pliers PEW12

Rennsteig Profi Kit to MC3,MC4, Tyco and Yukita

Description Cable shears with cuttingwidth of up to 50 mm²

Pliers for solar cables of 1.5 -6 mm²

Crimping pliers for variousinsert bits

Flexible case for everything todo with solar cables

Dimensions (L / W / H) 170 mm / 110 mm / 20 mm 200 mm / 110 mm / 20 mm 200 mm / 110 mm / 20 mm 340 mm / 275 mm / 83 mmWeight 240 g 425 g 620 g 1300 gWarranty 2 years 2 years 2 years 2 yearsNorms - - DIN 60352-2, DIN 41641 DIN 60352-2

AccessoriesArt. No. 1302136 1302137 1302138 1302139

Model Rennsteig crimping insert toMC3 and Yukita

Rennsteig locator to MC3 andYukita

Rennsteig crimping insert toMC4

Rennsteig locator to MC4

Dimensions (L / W / H) 38 mm / 33 mm / 12 mm 39 mm / 39 mm / 29 mm 32 mm / 32 mm / 12 mm 39 mm / 39 mm / 29 mmWeight 50 g 20 g 50 g 20 gWarranty 2 years 2 years 2 years 2 yearsNorms DIN 60352-2 DIN 60352-2 DIN 60352-2 DIN 60352-2

Art. No. 1302140 1302141 1302147 1302151

Model Rennsteig crimping insert toTyco

Rennsteig locator to Tyco Rennsteig crimping insert toHuber+Suhner 4 - 6 mm²

Rennsteig crimping insert toHirschmann 2.5 - 6 mm²

Dimensions (L / W / H) 32 mm / 32 mm / 12 mm 39 mm / 39 mm / 29 mm 32 mm / 32 mm / 12 mm 32 mm / 32 mm / 12 mmWeight 50 g 20 g 50 g 50 gWarranty 2 years 2 years 2 years 2 yearsNorms DIN 60352-2 DIN 60352-2 DIN 60352-2 DIN 60352-2

...................................................................................................................................................................Fitting Tool ACCESSORIES

...................................................................................................................................................................


157

Phoenix Contact surge protection – Lightningprotection concepts for PV systemsSurge protection devicesSurges, caused by lightning strikes or switching actions,are frequently the cause of damages and failures inelectrical equipment. Inverter failuresmean cost-inten-sive equipment damages. Yield losses and repair costsare consequences, which can be prevented by surgeprotection devices.

Protection circuit devicesSurge protection devices must be considered for allcircuits: On the DC side between L+, L- and the earthpotential, and on the AC side between the phases L1,L2, L3, the neutral wire and the earth potential. Inaddition, all other circuits (e.g. data and measuringtechnology circuits), which are connected to the inver-ter, must be protected with suitable products.

Direct and indirect lightning protectionDirect (exterior) lightning protection must be imple-mented by observing the protection zones and gal-vanic separations by means of lightning rods for thePV generator. For indirect (interior) lightning protec-tion, several Phoenix Contact products are available,which should be installed directly before the devices tobe protected (or at the lightning protection zone tran-sitions).

Features of the PV SETSn Surge protection for the DC siden Optional: Surge protection for the AC siden IP65 housingn Plug-in PV SET DC with MC4n For one string as standard, optional multi-stringavailable

n PE pins for a minimum of 6 mm² connection topotential equalisation

The PV SET 1000DC is equippedwith plug-inMC4 connectorsand ideally suited for lightning and surge protection ofindividual PV strings.

The PV SET 1000DC/AC can provide protection againstsurges in PV strings and AC outputs of single-phase inver-ters.

...................................................................................................................................................................ACCESSORIES Lightning Protection...................................................................................................................................................................

158

Art. No. 1302156 1302157 1302158 1302159 1302160

Model Phoenix Contact VAL-MS 1000DC/2+V-FM

Phoenix Contact PV SET1000DC, PV string

Phoenix Contact PV SET1000DC/AC, PV string &AC

Phoenix Contact PV SET5ST/600DC

Phoenix Contact FLT-CP-PLUS-3S-350, AC 3~,type 1

Surge protection DC, 1 string DC, 1 string AC and DC, 1 string DC, max. 5 strings ACMax. DC open circuit voltage 1000 V 1000 V 1000 V 600 V -Max. DC permanent voltage (L-PE)

1000 V 1000 V 1000 V 600 V -

Rated voltage AC - - - - 240 VMax. AC permanent voltage (L-N / N-PE)

- - 335 / 260 V - 350 / 350 V

Max. pre-fuse - - 125 A - 315 ARated current 80 A 30 A 80 A 30 A -Nominal lightning dischargecurrent (8/20) μs (L-N / N-PE)

15 kA 15 kA 15 kA 20 kA 25 / 100 kA

Max. lightning dischargecurrent (8/20) μs

30 kA 30 kA 30 kA 40 kA -

Lightning testing current(10/350) µs

- - - - 100 kA

Protection level (L-N / N-PE) < 5 kV < 5 / - kV < 5 / 1.5 kV < 3.6 / - kV < 1.5 / 1.5 kVResponse time (L-N / N-PE) < 25 ns < 25 ns < 25 ns < 25 ns < 100 / 100 nsCable connection (rigid /flexible)

0.5 - 35 mm² / 0.5 -25 mm²

MC4 0.5 - 35 mm² / 0.5 -25 mm²

0.5 - 35 mm² / 0.5 -25 mm²

2.5 - 35 mm² / 2.5 -25 mm²

Protection mode IP20 IP65 IP65 IP65 IP20Dimensions (L / W / H) - / 52.5 mm / - 125 mm / 200.0 mm /

122 mm200 mm / 200.0 mm /122 mm

300 mm / 300.0 mm /142 mm

- / 142.8 mm / -

Weight 367 g 1217 g 1523 g 3410 g 1748 gWarranty 2 years 2 years 2 years 2 years 2 yearsNorms IEC protection class II,

EN-Type T2IEC protection class II,EN-Type T2

IEC protection class II,EN-Type T2

IEC protection class II,EN-Type T2

IEC protection class I,EN-Type T1, IEC 61643-1/ EN 61643-11


...................................................................................................................................................................Lightning Protection ACCESSORIES

...................................................................................................................................................................


159

Art. No. 1302161 1302162 1302163 1302164 1302165

Model Phoenix Contact VAL-CP-3S-350, AC 3~, type 2

Phoenix Contact VAL-CP-1S-350, AC 1~, type 2

Phoenix Contact DT-LAN-CAT.6+, Ethernet

Phoenix Contact DT-TELE-RJ45, Analogue &ISDN

Phoenix ContactPlugtrab PT, sensorsystem

Surge protection AC AC Ethernet data circuit Analogue & ISDN datacircuit

Sensor system

Max. DC open circuit voltage - - - - -Max. DC permanent voltage (L-PE)

- - 3.3 V 130 V 12.8 V

Rated voltage AC 240 V 240 V - 185 V -Max. AC permanent voltage (L-N / N-PE)

350 / 264 V 350 / 264 V - - 9 V

Max. pre-fuse 125 A 125 A - - -Rated current - - 1.5 A 0.38 A 2 ANominal lightning dischargecurrent (8/20) μs (L-N / N-PE)

60 / 20 kA 20 / 20 kA 0.1 / 2 kA 5 / 5 kA 0.69 / 10 kA

Max. lightning dischargecurrent (8/20) μs

120 / 40 kA 40 / 40 kA - 10 kA 20 kA

Lightning testing current(10/350) µs

- - - - 2.5 kA

Protection level (L-N / N-PE) < 1.4 / 1.5 kV < 1.4 / 1.5 kV < 0.009 / 0.7 kV < 0.25 / 0.25 kV < 0.018 / 0.45 kVResponse time (L-N / N-PE) < 25 / 100 ns < 25 / 100 ns < 1 / 100 ns < 100 / 100 ns < 1 / 100 nsCable connection (rigid /flexible)

2.5 - 25 mm² / 2.5 -16 mm²

2.5 - 25 mm² / 2.5 -16 mm²

RJ45 RJ45, 0.14 - 1.5 mm² 0.2 - 4 mm² / 0.2 -2.5 mm²

Protection mode IP20 IP20 IP20 IP20 IP20Dimensions (L / W / H) - / 49.2 mm / - - / 25.3 mm / - 102 mm / 25.0 mm /

65 mm102 mm / 25.0 mm /65 mm

- / 17.5 mm / -

Weight 416 g 226 g 329 g 333 g 653 gWarranty 2 years 2 years 2 years 2 years 2 yearsNorms IEC protection class II,

EN-Type T2, IEC 61643-1/ EN 61643-11

IEC protection class II,EN-Type T2, IEC 61643-1/ EN 61643-11

IEC protection class / EN-Type B2, C2, D1, IEC61643-21 / EN 50173-1

IEC protection class / EN-Type B2, C2, C3, D1, IEC61643-21

IEC protection class / EN-Type C1, C2, C3, D1, IEC61643-21

The PV SET 5ST/600DC is suited for up to 5 strings with amaximum voltage of 600 V DC each, which can beconnected directly by means of terminals.

1. Phoenix Contact VAL-MS 1000DC/2+V-FM2. Phoenix Contact PV SET 1000DC, PV string3. Phoenix Contact PV SET 1000DC/AC, PV string & AC4. Phoenix Contact PV SET 5ST/600DC5. Phoenix Contact FLT-CP-PLUS-3S-350, AC 3~, type 16. Phoenix Contact VAL-CP-3S-350, AC 3~, type 27. Phoenix Contact VAL-CP-1S-350, AC 1~, type 28. Phoenix Contact DT-LAN-CAT.6+, Ethernet9. Phoenix Contact DT-TELE-RJ45, Analogue & ISDN10. Phoenix Contact Plugtrab PT, sensor system

...................................................................................................................................................................ACCESSORIES Lightning Protection...................................................................................................................................................................


160

Complete SystemsThe TRITEC complete systems and Ecolights lightingsystems are a combination of individual components thatare specially coordinated. This ensures the simple design ofideal stand-alone energy systems.

ECOLIGHTS

TRITEC

163

Ecolights – The innovative solar lighting systems

Sustainability, quality and designSustainability, quality and design are common featuresof Ecostar Standard, Ecostar with glass module andDouble-Sol. They are ideally suited for housing areas,public squares, building entrances, foot and cyclepaths, bridges, parks, gardens, playgrounds and camp-ing sites, water fronts, bus stops, leisure and sportfacilities.

EcostarThe cylindrical light made of high-quality plastic andthe slightly curved special laminate module of theEcostar combine design and functionality. The modelwith glass module blends into any surroundings andprovides intriguingly simple looks. The solar modules,adjustable by 360°, can be optimally adjusted to anyenvironment. With their operation period of morethan 50000 hours, the used LED illuminants are notonly energy saving, but also extremely long-lastingand efficient. The Ecostar lights are designed for

8 hours of operation per day. The lights switch onautomatically at nightfall for 6 hours and for 2 hoursat dawn.

Double-SolThe ecological lighting option Double-Sol combinesinnovative solar technology and contemporary wooddesign. In addition to the features of the Ecostar mod-els, the Double-Sol has a LED night light between itstwo wooden masts, thus creating an attractive mood,showing off the innovative design and combining aes-thetics and functionality.

Advantages in briefn Absolutely maintenance-freen Long-lastingn Quick and easy installationn Innovative designn No electricity costsn No wiring expenses

The solar street light Ecostar Standard is specifically suitedfor installations without grid connection.

Photometric features of the Ecolights.

...................................................................................................................................................................COMPLETE SYSTEMS Stand-alone System Kits...................................................................................................................................................................

164

Art. No. 1100120 1100121 1100122

Model Ecostar Standard Ecostar with LSG glass module Double-SolTotal height 4.1 m 4.2 m 4.0 mLens height 3.3 m 3.3 m 3.3 mMaterial Aluminium Aluminium / glass Aluminium / woodSolar module 60 Wp 58 Wp 60 WpMaintenance-free solar gelbattery

48 Ah 48 Ah 54 Ah

Luminous flux of LEDilluminants

1100 lm 1100 lm 1200 lm

Operation period > 8 hours > 8 hours > 8 hoursWeight incl. base console 56 kg 62 kg 92 kgWarranty 2 years 2 years 2 yearsNorms CE mark CE mark CE mark

...................................................................................................................................................................Stand-alone System Kits COMPLETE SYSTEMS

...................................................................................................................................................................


165

TRITEC Off-Grid Kits – The smart packages in sizesXS – XXL

Solar stand-alone systemsWhere there is no grid connection, solar stand-alonesystems often provide the ideal solution to supply con-sumers with energy efficiently. Stand-alone energysystems can for example be used for garden sheds,weekend or holiday homes; in regions that are toofar away from the grid, even complete villages areequipped with so-called "Solar Home Systems". Com-pared to conventional diesel units, the solar systemsoffer some essential benefits, for example the runningcosts for fuel can be omitted.

Solar generator, charge controller and bat-teryThe three components solar generator, charge control-ler and battery are the core of every solar stand-aloneenergy system. For the solar generator, the use ofstand-alone modules of Kyocera is recommended;they deliver exactly that voltage required to chargethe battery. The charge controllers of Morningstarare globally used in even the most adverse climate

conditions and ensure gentle charging and dischargingof batteries. The Hoppecke batteries are special solarbatteries that offer a higher number of cycles com-pared to normal lead batteries.

Stand-alone invertersIf solar stand-alone systems are to be supplied simulta-neously with major 230 V consumers, a stand-aloneinverter must be part of the complete system as well.The Kaco stand-alone inverters convince with theirhigh level of efficiency, due to the HF transformertopology and easy operation via an integrated LCDdisplay.

Featuresn 3 small Off-Grid Kits (XS, S,M) for 12 VDC consumersn 3 large Off-Grid Kits (L, XL, XXL) for 230 V consumersn Special stand-alone modules of Kyoceran Sturdy charge controllers of Morningstarn Cycle-proof batteries of Hoppecken Efficient stand-alone inverters of Kaco

Solar stand-alone energy systems consist of a solar gener-ator (modules), an internal control (charge controller), anenergy storing unit (battery) and, if required, an energyconverter (stand-alone inverter).

The Kyocera stand-alone modules' electrical parameters arespecifically designed for the use in stand-alone systems.

...................................................................................................................................................................COMPLETE SYSTEMS Stand-alone System Kits...................................................................................................................................................................

166

Art. No. 1100114 1100115 1100116 1100117 1100118 1100119Model TRITEC Off-Grid Kit

XSTRITEC Off-Grid KitS

TRITEC Off-Grid KitM

TRITEC Off-Grid KitL

TRITEC Off-Grid KitXL

TRITEC Off-Grid KitXXL

Modules 1 x KD50SE-1P 1 x KD95SX-1P 1 x KD135SX-1PU 2 x KD95SX-1P 2 x KD135SX-1PU 4 x KD135SX-1PUModule output 50 Wp 95 Wp 135 Wp 190 Wp 270 Wp 540 WpModule rated voltage 17.9 V 17.9 V 17.7 V 17.9 V 17.7 V 35.4 VModule rated current 2.80 A 5.31 A 7.63 A 10.62 A 15.26 A 15.26 ACable set module/chargecontroller

2 x 10 m Radox4 mm², 4 cable endsleeves



1 x 2 m Radox4 mm², 2 x 10 mRadox 4 mm²,6 cable end sleeves

1 x 2 m Radox4 mm², 2 x 10 mRadox 4 mm²,6 cable end sleeves

4 x 2 m Radox4 mm², 2 x 10 mRadox 4 mm²,12 cable endsleeves

Charge controller Morningstar SHS-6 Morningstar SHS-6 Morningstar SHS-10 Morningstar SHS-10 Morningstar Pro-Star-15

Morningstar TriStar- 45

System voltage 12 V 12 V 12 V 12 V 12 V 24 VLoad current 4.25 A 6.00 A 10.00 A 10.00 A 15.00 A 45.00 ACable set chargecontroller/battery

2 x 2 m Radox4 mm², 4 cable endsleeves, 1 batteryterminal fuse 50 A




2 x 2 m Radox10 mm², 4 cableend sleeves,1 battery terminalfuse 100 A

2 x 2 m Radox10 mm², 4 cableend sleeves,1 battery terminalfuse 100 A, batteryterminal clip withcable clip (+ / ‑)

Battery Hoppecke power.com SB 12V 60

Hoppecke power.com SB 12V 100

Hoppecke power.com SB 12V 130

2 x Hoppeckepower.com SB 6V220



Battery capacity (10 h) 63 Ah 95 Ah 129 Ah 220 Ah 220 Ah 220 AhStand-alone inverter - - - Kaco KI 250 - 12 V Kaco KI 1000 - 12 V Kaco KI 2000 - 24 VDimensions (L / W / H) 530 mm / 660 mm /

294 mm1010 mm / 660 mm /292 mm

1430 mm / 660 mm /325 mm

1010 mm / 660 mm /577 mm

1430 mm / 660 mm /753 mm

1430 mm / 660 mm /1183 mm

Weight 22.6 kg 34.4 kg 54.3 kg 73.0 kg 105.0 kg 202.0 kgWarranty 2 years 2 years 2 years 2 years 2 years 2 years

The generated solar energy is efficiently temporarily storedin the extremely cycle-proof batteries of Hoppecke.

The Kaco stand-alone inverters of the Kits L, XL and XXLreliably deliver alternating current, thus allowing for theconnection of all major 230 V consumers.

...................................................................................................................................................................Stand-alone System Kits COMPLETE SYSTEMS

...................................................................................................................................................................


167

Customer Support andServicesSupported in every aspect: We not only plan and calculatephotovoltaic systems of all sizes, we also offerphotovoltaic insurance upon request. Our web site offersyou our product software, documentations and brochures.In addition, we regularly provide training courses.

169

Product SoftwareProduct software, which helps you in the selection of the products, is available on our web site’s Product Software section or on the relevant product web site.

Product software is available for the dimensioning of your mounting system, both for the proprietary TRITEC mount-ing systems TRI-STAND and TRI-VENT, as well as for the Solrif roof-integrated system. The dimensioning software TRI-DESIGN allows for our PV mounting systems TRI-STAND and TRI-VENT to be designed quickly and easily. The dimensioning software TRI-DESIGN for PV mounting systems: • allows the dimensioning of PV mounting systems with

just a few clicks;• takes into account the characteristics of the respective

roof and used solar modules;• finally, the programme automatically creates a bill of

materials, which can be exported, edited and sent.

For our characteristics analyser TRI-KA, the TRITEC product for checking the output of installed solar modules, there is the TRI-KA product software. The TRI-KA software can com-pare the target output of the solar system with its actual output and display the result. Both operation and perform-ance of our TRI-KA, including the TRI-KA software, have been essentially enhanced in time for the Intersolar 2010.For the TRI-KA software this means: Intuitive operation, even without prior knowledge!

Dimensioning software for inverters calculates suitable inverters for your solar modules, dependent on site, orien-tation and slope. In addition to the actual inverter dimen-sioning, customer-compatible project overviews, including energy yield, can be created. Inverter dimensioning soft-ware is available for different TRITEC inverters: Danfoss, SMA and Kaco.

The dimensioning software TRI-DESIGN allows us to design the system optimally for the individual roof and thus to select the best version of the mounting system. © TRITEC International AG

The TRI-STAND dimensioning software TRI-DESIGN calculates and designs the mounting systems TRI-STAND and TRI-VENT according to the standards of DIN 1055*. The relevant directives are DIN 1055-4* for wind loads and DIN 1055-5* for snow and ice loads, which affect the photovoltaic system and its substructure. © TRITEC International AG

* European standard: EN 1991-1-3Dimensioning software TRI-DESIGN

171

Training Centre France, Montpellier

Training Courses

We regularly offer product training courses and work-shops. You will find the current training dates, subjects and venues on our web site: www.tritec-energy.com/training

Our special training offerings for 2010

Mounting systems TRI-STAND and TRI-VENT in practice: an intensive training course with guarantee benefits Design the mounting systems TRI-STAND and TRI-VENT quickly and safely: This intensive training course teaches you all you need to know about roofs, load effects and statics and gives you the opportunity to apply the gained knowledge in practice: with the mounting systems TRI-STAND and TRI-VENT and the dimensioning software TRI-DESIGN.

Extension of manufacturer’s guarantee: All installers, who successfully attended a TRI-STAND and TRI-VENT intensive training course, will receive a guarantee extension for TRI-STAND and TRI-VENT of an additional 5 years to 10 years in total.

TRI-KA II: Easy and quick output checking of installed solar modules Our characteristics analyser TRI-KA, the TRITEC product for checking the output of installed solar modules, is precisely tailored to today’s and future requirements of PV installers. By analysing the characteristics, the solar system’s output can be measured during the installation, handover or maintenance of the system and compared with the target output. Working with the characteristics measuring device TRI-KA could not be more efficient: The device is extremely easy to operate and extraordinarily flexible and versatile thanks to its technical enhancements.

This training course informs you about all the typical out-put reducing factors of photovoltaic systems, characteristics analysis and the measuring procedure with the characteris-tics analyser TRI-KA II.

Our download section offers product documentations, declarations of conformity, installation instructions and guarantee terms for all our products.In addition to our product catalogue, our company bro-chure is available. On our web site as download or you may order it from: +41 61 699 35 55 (International Head-quarters, Switzerland).

Product Documentations and Brochures 173

Reference CasesWe meet the highest quality demands in different areas.Thanks to our high-quality products and our long years ofexperience, we have the ideal solution for everyrequirement: Photovoltaic solutions made to measure.

175

Stade de Suisse, Bern (Switzerland)Installed power 1.35 MWpSolar modules 5,122 units Kyocera KC167GH-2

2,808 units Kyocera KC175GHT-2Inverters 7 units SolarMax 125

4 units SolarMax 100CMounting system AlufixCO2 savings/year 567 tonsEnergy yield 1,134,045 kWh/yearCommissioning 18th March 2005 (855 kWp)

9th August 2007 (491 kWp)Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator BKW FMB Energie AG

Rental Flat Complex Eulachhof, Winterthur(Switzerland)Installed power 176 kWpSolar modules 880 units Kyocera KC200GHT-2Inverters 2 units SolarMax 80CMounting system AluTec CF (flat roof Halfen)CO2 savings/year 92 tonsEnergy yield Approx. 164,000 kWh/yearCommissioning 26th June 2007Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Profond Contract Collective /

Allianz Suisse Life InsuranceCompany

IKEA AFG Arena, St. Gallen (Switzerland)Installed power 202.4 kWpSolar modules 1,012 units Kyocera KC200GHT-2Inverters SolarMax 80C and 100CMounting system AluTec CF (flat roof Halfen)CO2 savings/year 95 tonsEnergy yield 190,250 kWh/yearCommissioning 13th August 2007Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Municipal Utility St. Gallen

Stade de Suisse – The world’s largest roof-integrated solarpower plant on a football stadium.

The photovoltaics system on the flat roof of the IKEA AFGArena ensures CO2 savings of 95 tons/year.

Swiss Solar Award 2007 – The zero energy residential devel-opment is architecturally and energetically noteworthy.

176

Window Factory Nauer, Samstagern (Switzerland)Installed power 123.62 kWpSolar modules 567 units Kyocera KD205GH-2P Inverters 1 unit SolarMax 100C (flat roof)

1 unit SolarMax 3000S, 2 units SolarMax 2000S (front)

Mounting system AluStand (flat roof)TRI-VENT (front)

CO2 savings/year 56.1 tonsEnergy yield Approx. 112,128 kWh/yearCommissioning 14th November 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Sanjo Green AG, Altendorf

Factory Frigel Firenze S.p.A., Florence (Italy)Installed power 175.6 kWpSolar modules 878 units Kyocera KC200GHT-2Inverters 2 units SolarMax 50C

1 unit SolarMax 80CMounting system AluTec CFCO2 savings/year 122 tonsEnergy yield 230,000 kWh/yearCommissioning 9th May 2008Distributor TRITEC GroupPlanner / Installer TRITEC Italia s.r.l.Operator Frigel Firenze S.p.A.

Flat roof, shed roof and facades – The photovoltaicssystem was installed on different surfaces.

Quick assembly on front and roof: No problem with TRI-VENT and AluStand.

Department Store La Trocha, Malaga (Spain)Installed power 103.73 kWpSolar modules 506 units Kyocera KD205GH-2P Inverter 1 unit SolarMax 100CMounting system Own constructionCO2 savings/year 83 tonsEnergy yield 165,968 kWh/yearCommissioning September 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung Aarberg;TRITEC Trienergy Technology S.L. | España

Operator Solarwind Invest Spain, S.L.Thanks to ideal South-facing and inclination, the systemprovides the best possible energy output.

177

Farmer Johann Schild, Hainsacker(Germany)Installed power 58.31 kWpSolar modules 343 units Kyocera KC170GHT-2Inverters 9 units Kyocera KC5.4i

2 units Kyocera KC3.6iMounting system AluStandCO2 savings/year 38 tonsEnergy yield Approx. 54,231 kWh/yearCommissioning 12th July 2005Distributor TRITEC GroupPlanner TRITEC Deutschland GmbHInstaller K&S Solar Systeme GmbH &

Co.KG, RegensburgOperator Farmer Johann SchildHealthy milk from happy cows and clean energy from

quality modules.

Sulzer II, Zürich (Switzerland)Installed power 79.2 kWpSolar modules 396 units Kyocera KC200GHT-2Inverters 2 units SolarMax 35CMounting system AluStand (Kalzip)CO2 savings/year 42 tonsEnergy yield Approx. 75,240 kWh/yearCommissioning 30th July 2007Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Alteno Contracting AG

An area of 558.65 m2 generates electricity for 21 averagehouseholds.

Novartis Gehry Building, Basel(Switzerland)Installed power 92.74 kWp (7 sub-systems)Solar modules Schüco & SunwaysInverters 7 units FroniusMounting system Integration into the building

exterior of Josef Gartner GmbHCO2 savings/year 32.5 tonsEnergy yield Approx. 65,000 kWh/yearCommissioning 13th November 2008Distributor TRITEC GroupPlanner Baumgartner GmbH, GermanyInstaller TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator NovartisThe system, integrated into the building exterior, ensures

solar energy and good looks for the architectural jewel.

178

School Building Breite, Herrliberg(Switzerland)Installed power 39.69 kWpSolar modules 189 units Kyocera KD210GH-2PInverters 4 units SMA SMC 9000TLMounting system AluStandCO2 savings/year 18.7 tonsEnergy yield Approx. 37,308 kWh/yearCommissioning 14th October 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Herrliberg municipality

Advantageous location – Due to the view of the lake, notonly vines enjoy stronger solar irradiation.

Secondary School Building, Langnau i. E.(Switzerland)Installed power 30.24 kWpSolar modules 144 units Kyocera KD210GH-2PInverters 6 units SolarMax 6000SMounting system AluStandCO2 savings/year 14.6 tonsEnergy yield Approx. 29,100 kWh/yearCommissioning 28th November 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Energie Plus, Langnau

Good teamwork: Solar modules and inverters brave allweather conditions.

Technical Centre Holligen, Bern(Switzerland)Installed power 55.6 kWpSolar modules 278 units Kyocera KC200GHT-2Inverters SolarMax 30C & SolarMax 20CMounting system AluStand (flat roof)CO2 savings/year 26.5 tonsEnergy yield Approx. 51,700 kWh/yearCommissioning 13th July 2007Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Energie Wasser Bern

The quality of the photovoltaic installation is assured bythe string current monitoring using a datalogger.

179

Agricultural Enterprise, Hautes Alpes(France)Installed power 29 kWpSolar modules 162 units SolarWorld

Sunmodule+ SW 180 monoInverters 3 units SMA SMC 9000TL

1 unit SMA SB 1100Mounting system Roof integrationCO2 savings/year 12 tonsEnergy yield Approx. 34,800 kWh/yearCommissioning Summer 2008Distributor TRITEC GroupTechnical support TRITEC France SARLPlanner / Installer LuberonSolaireOperator Agricultural enterpriseThe original asbestos roof could be fully replaced by the

roof-integrated system.

Farm Klöti, Zürich (Switzerland)Installed power 30.24 kWpSolar modules 168 units Kyocera KD180GH-2PInverters 6 units TRI-Xi 5.4 MVMounting system AluStandCO2 savings/year 14.2 tonsEnergy yield Approx. 28,425 kWh/yearCommissioning 14th October 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator The Klöti Family, Zürich

Profitable surfaces: Solar power is generated on tworoofs.

Detached Family House, les Landes(France)Installed power 22.8 kWpSolar modules 176 units Kyocera FC130GX-2PInverters 1 unit SMA SMC 9000TL

1 unit SMA SMC 6000TL1 unit SMA SB 5000TL-201 unit SMA SB 1700

Mounting system SolrifCO2 savings/year 8.8 tonsEnergy yield Approx. 20,000 kWh/yearCommissioning Summer 2009Distributor TRITEC GroupPlanner TRITEC France SARLInstaller EcoSysteoOperator Private operator

The 23 kWp system covers the roof completely and is per-fectly integrated into its surroundings.

180

Solar Power Plant, Jungfraujoch(Switzerland)Installed power 11.6 kWpSolar modules 58 units Kyocera KC200GHT-2 Inverters 4 units SolarMax 3000SMounting system Facade system, own constructionCO2 savings/year 8.1 tonsEnergy yield Approx. 16,250 kWh/yearCommissioning Winter 2007/2008Distributor TRITEC GroupPlanner / Installer sol-E Suisse AGOperator BKW FMB Energie AG

Top of Europe – The highest solar power plant in theworld.

Detached Family House Eberenz, Biel-Benken (Switzerland)Installed power 9.25 kWpSolar modules 35 units MegaSlate 136 W

51 units special modulesInverters 2 units SolarMax 4000C

1 unit SolarMax 3000SMounting system MegaSlate 3S (roof integration)CO2 savings/year 3.8 tonsEnergy yield Approx. 7,600 kWh/yearCommissioning 20th June 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator The Eberenz Family, Biel-BenkenThe photovoltaic system comprises the west, east and

south side of the pyramidal broach roof.

ISES SolarCarport, Freiburg i.Br. (Germany)Installed power 14.04 kWpSolar modules 108 units Kyocera FL130T-1AInverters 2 units Kyocera KC5.4i

1 unit Kyocera KC1.8iMounting system SolrifCO2 savings/year 8.2 tonsEnergy yield Approx. 12,635 kWh/yearCommissioning March 2007Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator ISES (International Solar Energy

Society)SolarCarport – The laminates, in combination with Solrif,form the vapour barrier.

181

Detached Family House, Falkenstein(Germany)Installed power 7.35 kWpSolar modules 35 units Kyocera KD210GH-2PUInverters 1 unit SolarMax 4200S

1 unit SolarMax 3000SMounting system TRI-STANDCO2 savings/year 2.9 tonsEnergy yield Approx. 5,950 kWh/yearCommissioning 14th July 2009Distributor TRITEC GroupTechnical support TRITEC Deutschland GmbHPlanner / Installer FAMOSOperator Private operator

Attractive Kyocera PV system; easily and safely installedwith the TRI-STAND mounting system.

Detached Family House Neuffer,Deckenpfronn (Germany)Installed power 9.23 kWpSolar modules 45 units Kyocera KD205GH-2PInverter 1 unit TRI-Xi 10.0Mounting system TRI-STANDCO2 savings/year 6.5 tonsEnergy yield Approx. 9,300 kWh/yearCommissioning 30th July 2009Distributor TRITEC GroupTechnical support TRITEC Deutschland GmbHPlanner / Installer Elektro Walz, DeckenpfronnOperator E. Neuffer

Aesthetics and photovoltaics go well together.

Detached Family House Hopman,Mahlberg (Germany)Installed power 6.72 kWpSolar modules 32 units Kyocera KD210GH-2PUInverters 2 units SMA SB 3000TL-20Mounting system TRI-STANDCO2 savings/year 4.6 tonsEnergy yield 6,552 kWh/yearCommissioning 1st June 2009Distributor TRITEC GroupPlanner / Installer TRITEC Deutschland GmbHOperator The Hopman Family, Mahlberg

The Plus energy of the solar system brings double bene-fits: in ecological as well as economical terms.

182

Farmer H. Bauer, Gechingen (Germany)Installed power 5.7 kWpSolar modules 60 units Schott ASI 95Inverter 1 unit SMA SMC 5000AMounting system TRI-VENTCO2 savings/year 3.8 tonsEnergy yield 5,415 kWh/yearCommissioning July 2009Distributor TRITEC GroupPlanner TRITEC Deutschland GmbHInstaller Elektro Walz, DeckenpfronnOperator Farmer H. Bauer

Securing without screws: The new trapezoidal sheetsystem TRI-VENT.

Detached Family House, Rüti (Switzerland)Installed power 5.95 kWpSolar modules 35 units Schott Solar

ASE 165-GT-FT/MC 170 WpInverters 2 units SolarMax 3000SMounting system AluStandCO2 savings/year 2.9 tonsEnergy yield Approx. 5,900 kWh/yearCommissioning 10th July 2008Distributor TRITEC GroupPlanner / Installer LEAB AG – Qualified installer of

TRITEC AG | SchweizOperator Private operator

A nice view and a large electricity yield are certain for thedetached family house.

Petrofer AG, Reinach (Switzerland)Installed power 6 kWpSolar modules 16 units Kyocera KC175GHT-2

(front)16 units Kyocera KC200GHT-2(flat roof)

Inverters 2 units SolarMax 3000SMounting system AluStandCO2 savings/year 2.8 tonsEnergy yield Approx. 5,630 kWh/yearCommissioning 16th May 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator Petrofer AG, ReinachEach surface can be used – be it roof or front.

183

Garage Building Christ, Biel (Switzerland)Installed power 4.31 kWpSolar modules 21 units Kyocera KD205GH-2PInverters 2 units SolarMax 2000SMounting system AluStandCO2 savings/year 1.9 tonsEnergy yield Approx. 3,810 kWh/yearCommissioning 11th June 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator The Christ Family, Biel

Beautiful views and strong solar irradiation: There is morethan just one benefit to be gained from the garage roof.

Detached Family House, Bad Sobernheim(Germany)Installed power 4.59 kWpSolar modules 27 units Schott Solar

Schott Poly 170Inverter SMA SB 4000TL-20Mounting system AluStandCO2 savings/year 2.9 tonsEnergy yield 4,360 kWh/yearCommissioning 18th August 2008Distributor TRITEC GroupPlanner / Installer SolarCelsius OHGOperator Private operator

The sun over the Rhineland Palatinate provides good wineand high solar gain.

Tracker, Wilchingen (Switzerland)Installed power 5.44 kWp Solar modules 32 units Schott Solar

Schott Poly 170 Inverters 2 units SolarMax 3000SMounting system Biaxial tracker from SolarTrackCO2 savings/year 3.6 tonsEnergy yield Approx. 7,200 kWh/yearCommissioning 1st December 2008 Distributor TRITEC GroupPlanner / Installer Solarbau Lowel GmbHOperator Private operator

Thanks to automatic biaxial tracing, the tracker producesup to 35 % more power.

184

Detached Family House, Verdun-en-Lauragais (France)Installed power 2.97 kWp Solar modules 18 units SolarWorld

Sunmodule+ SW 165 mono Inverter 1 unit SolarMax 3000SMounting system SolarWorld energy roofCO2 savings/year 1.2 tons Energy yield 3,543 kWh/year Commissioning February 2009Distributor TRITEC GroupPlanner TRITEC France SARLInstaller Phoebus EnergiesOperator Private operator

A typical detached house: 3,500 kWh/year corresponds tothe yield of the average household.

Detached Family House, Saint-Hippolyte(France)Installed power 3 kWpSolar modules 18 units SolarWorld laminates

SW 170 WpInverter SolarMax 3000SMounting system SolarWorld energy roofCO2 savings/year 1.2 tonsEnergy yield Approx. 3,500 kWh/yearCommissioning March 2008Distributor TRITEC GroupPlanner TRITEC France SARLInstaller SARL Solaire du RoussillonOperator Private operator

The roof-integrated photovoltaics system blends in idylli-cally with its surroundings.

Detached Family House Suter, Meilen(Switzerland)Installed power 3.96 kWpSolar modules 18 units SolarWorld

Sunmodule+ SW 220 poly Inverter 1 unit SolarMax 4000CMounting system AluStandCO2 savings/year 1.8 tonsEnergy yield Approx. 3,566 kWh/yearCommissioning 28th April 2008Distributor TRITEC GroupPlanner / Installer TRITEC AG | Schweiz

Zweigniederlassung AarbergOperator The Suter Family, Meilen

Ideal location: At Lake Zurich increased solar irradiation isguaranteed.

185

Detached Family House, Lucca (Italy)Installed power 2.4 kWpSolar modules 12 units Kyocera KC200GHT-2Inverter 1 unit SolarMax 3000CMounting system AluTec CFCO2 savings/year 1.6 tonsEnergy yield 2,965 kWh/yearCommissioning 21st January 2008Distributor TRITEC GroupPlanner / Installer TRITEC Italia s.r.l.Operator Private operator

Detached family houses use the sun for energy supply.

Detached Family House, Roussillon(France)Installed power 2.6 kWp Solar modules 20 units Kyocera FL130T-1A Inverter 1 unit SolarMax 3000SMounting system SolrifCO2 savings/year 3.1 tons Energy yield 3,380 kWh/year Commissioning February 2008 Distributor TRITEC GroupPlanner TRITEC France SARLInstaller Julien Cayla Consulting SarlOperator Private operator

Integrated into the roof and the environment: Close by isone of the most significant ochre deposits in Europe.

Detached Family House, Provence (France)Installed power 2.72 kWp Solar modules 16 units SolarWorld

Sunmodule+ SW 170 mono Inverter 1 unit SMA SB 2500Mounting system SolarWorld energy roofCO2 savings/year 1.1 tons Energy yield Approx. 3,250 kWh/year Commissioning August 2009Distributor TRITEC GroupPlanner TRITEC France SARLInstaller Sarl OrcaterOperator Private operator

Optimal roof integration: The SolarWorld energy roof.

186

Wyssen Avalanche Mast, Mattertal(Switzerland)Installed power 36 WpSolar modules 3 units SunWare 12/1Battery Approx. 30 days

(autonomy period)Mounting system Own constructionCommissioning 20th November 2007Distributor TRITEC GroupPlanner AlpuG GmbHInstaller Wyssen Seilbahnen AGOperator Täsch municipality

The autonomous energy supply of the stand-alone systemallows an artificial triggering of avalanches.

Ziteil Pilgrimage Church, Salouf GR(Switzerland)Installed power 1.7 kWpSolar modules 16 units Kyocera LA721G108 Battery 8 days (autonomy period)Mounting system Own constructionCommissioning February 1996Distributor TRITEC GroupPlanner / Installer TRITEC AGOperator Salouf GR rectory

The remote Ziteil church is provided with power using astand-alone system.

Detached Family House, Saint Saturnin lesAvignon (France)Installed power 2.1 kWp Solar modules 16 units Kyocera FL130T-1A Inverter 1 unit SolarMax 3000SMounting system SolrifCO2 savings/year 1 tonEnergy yield Approx. 2,700 kWh/yearCommissioning December 2008 Distributor TRITEC GroupPlanner TRITEC France SARLInstaller Groupement PV LuberonOperator Private operator

The photovoltaic system is located close to Avignon – oneof the most beautiful cities of Provence.

187

§ 1 Scope1. TRITEC‘s supplies, services and offers shall be exclusively made on the basis of the following Conditions of Sale and Delivery. The once agreed upon Conditions of Sale and Delivery shall also be valid for all future business relations even if they are not once again explicitly agreed upon. Any agreements which are made between the customer and TRITEC for the purpose of the execution of this con-tract shall be recorded in writing.2. These conditions shall be considered accepted at the latest upon the receipt of goods or services. TRITEC‘s silence to different provisions by the customer shall not be considered as a consent to the customer‘s conditions; their validity is opposed. Any deviation from TRITEC‘s Conditions of Sale and Delivery shall be considered as a rejection of the order; any receipt of a delivery notwithstanding – even subject to reservations – shall be considered as consent to TRITEC‘s Condi-tions of Sale and Delivery.3. Any agreements between the customer and TRITEC which supplement or modify these General Terms and Conditions shall only be valid if they are agreed upon in writing.

§ 2 Offer and Contract Conclusion1. TRITEC‘s offers or, respectively, quotations shall be principally non-binding and without engagement, unless explicitly otherwise agreed upon. 2. Decisive shall otherwise be the prices, plus appropriate statutory sales tax, as indicated in TRITEC‘s order confirmation. Additional deliveries and services shall be separately invoiced.3. Offers by TRITEC refer to the requirements known to us with regard to the specified quantities at the time of tendering or the confirmation regarding ma-terial quality, dimensional tolerances and manufacturer‘s conditions. Subse-quent changes shall require our explicit consent and entitle us to change the price accordingly. Data in our brochures – such as photos, drawings and other specifications – are only approximately. Accordingly, they establish neither a quality agreement nor any warranty and shall not be relevant for the contrac-tual provision of the service and delivery item.4. Drawings, illustrations, dimensions, weights or other performance data shall only be binding if this is explicitly agreed upon in writing. Any illustrations, drawings, calculations and other documents shall remain TRITEC property and may not be transmitted to third parties without explicit consent. This shall also apply for such written documents which are designated “confidential”.5. The contract shall only become effective by TRITEC‘s written order confirma-tion to the customer based on the customer‘s order; this may also be done elec-tronically (via email).6. The contract shall be concluded with the proviso of correct and on-time deliv-ery to TRITEC by TRITEC‘s suppliers. This shall only apply in the event that TRITEC is not responsible for the non-delivery, in particular, upon conclusion of a congruent covering deal with the supplier. The customer shall be immediately informed about the non-availability of performance. The quid pro quo shall be immediately reimbursed.7. Upon contract signature, the customer shall agree to use the products only for the purpose of use intended by the manufacturer.

§ 3 Prices and Terms of Payment1. TRITEC shall principally deliver against prepayment. If no prepayment is re-quested, the payment claim shall become due and payable at the latest with the provision of the delivery for the customer. Partial deliveries shall be paid within the scope of the individual delivery. Payment dates shall be complied with even if the delivery or acceptance of goods is delayed for reasons which TRITEC is not responsible for. Payments may not be reduced or refused due to complaints or unaccepted claims. Any discount deduction shall require a special written agreement.2. Unless otherwise agreed upon in the order confirmation, prices shall be valid ex manufacturer or TRITEC warehouse, plus costs for packaging, insurance and shipping; these costs shall be separately invoiced. 3. TRITEC shall be entitled to change prices correspondingly if cost reductions or cost increases result, after contract conclusion, especially due to wage settle-ments or material price changes. This shall be substantiated to the customer upon request.4. Statutory regulations shall apply regarding the consequences of any default in payment. Without prior notice of default, a penalty interest of 7 % effective as of the payment due date shall be invoiced for receivables which are not paid as agreed. 5. The customer shall only be entitled to offset rights if the customer‘s counter-claims are recognized by declaratory judgment, uncontested, or have been ac-knowledged by us in writing. Moreover, the customer is entitled to exercise a right of retention insofar as his/her counterclaim is based on the same contrac-tual relationship.

General Terms and Conditions by the TRITEC Group for Commerce

§ 4 Period of Delivery and Service1. The written form shall be required for delivery periods or due dates which may be agreed upon as binding or non-binding. TRITEC‘s compliance with deliv-ery and performance obligations shall require the prerequisite of the customer‘s on-time and proper performance of obligations. TRITEC shall be entitled at any time to partial deliveries and partial services, unless the partial delivery or the partial service is unsuitable for the customer.2. Even in case of bindingly agreed upon time limits and due dates, TRITEC shall not be responsible for delivery and performance delays due to force majeure and due to events which make any delivery for TRITEC not only temporarily con-siderably impaired or impossible – this includes, in particular, strike, lock-out, official orders, etc., even if they occur at our suppliers‘ or their subcontractors. This shall entitle TRITEC to postpone delivery or, respectively, performance by the period of impairment, plus a reasonable start-up period or to rescind the contract wholly or in parts because of the part not yet performed.3. If the obstruction takes more than three months, the customer shall be enti-tled to rescind the contract with regard to the not yet performed part – after having granted a reasonable extension of time. If the delivery or performance period is extended or if TRITEC is released from its obligations, the customer may not derive any damage claims therefrom. TRITEC can only rely on the indicated circumstances if it notifies the customer within a reasonable period of time.4. As far as TRITEC is responsible for the non-compliance with bindingly prom-ised time limits and due dates or if it is in delay, the customer shall be entitled to a compensation for the delay in the amount of one half percent for every com-pleted week of delay; at maximum, however, to a total of up to five percent of the deliveries and services affected by the delay. Any claims in excess thereof shall be excluded, unless the delay is due to at least gross negligence by TRITEC.5. If the customer is in delay of acceptance, TRITEC shall be entitled to demand restitution of the damage incurred. Unless already transferred, the risk of acci-dental deterioration and accidental loss shall pass over to the customer upon the onset of the delay in acceptance.

§ 5 Passage of Risk1. The risk shall pass to the customer as soon as the shipment has been handed over to the person carrying out the transport or has left our warehouse for the purpose of shipment. If shipment is delayed upon the customer‘s request, the risk shall pass to the customer with the ready-for-shipment note.2. If personal delivery is not possible due to the absence of the customer or a cus-tomer‘s representative, TRITEC‘s agent shall leave the material. The customer‘s risk and duty of care shall begin with the point in time of delivery, even without any personal delivery.

§ 6 Warranty1. TRITEC shall be notified in writing of objections and complaints regarding deliveries and services within five days after receipt of the shipment, or for turn-key plants within five days after first commissioning. Warranty claims by the customer shall require that customer has properly complied with legally due re-quirements of examination and giving notice of defects.2. Insofar as there is a defect of the goods, TRITEC shall be entitled, at its option, to post-performance in the form of a remedy of defects or delivery of new, non-defective goods. In case of a remedy of defects, TRITEC shall be obligated to bear all expenditures required for the purpose of the remedy of defects, in particular the costs of transport, infrastructure, work and material insofar as they do not increase due to the fact that the goods were taken to another location than the place of performance. 3. If post-performance fails, the customer shall be entitled to optionally demand rescission or reduction.4. If the customer receives deficient assembly instructions, TRITEC shall merely be obligated to deliver faultless assembly instructions; this, however, only if the deficiency in the assembly instructions conflicts with proper assembly.5. The warranty period shall be one year as of delivery. For consumers, the period of limitation shall be two years as of delivery. In case of an agreement of accept-ance, the warranty period shall begin on the day of acceptance of the delivery object. The above shall not apply if the customer had not notified the defect in due time.6. After expiry of the warranty period, TRITEC grants the performance warranty for modules to the customer according to the manufacturer warranty provided, as far as TRITEC can claim on the manufacturer’s performance warranty.7. Guarantees in the legal sense shall only be given by TRITEC if they are explic-itly included in the order confirmation and have been designated as a promise of specific properties of the delivery object. 8. Warranty shall be excluded if the customer or a third party charged by the customer has improperly performed work on the delivery object. Any warranty claims shall expire if the customer attaches unauthorized additional devices or

188

either him/herself or through third parties provides unauthorized interventions and/or repairs on delivery objects without explicit arrangement with TRITEC.

§ 7 Liability1. TRITEC shall be liable according to the statutory conditions as far as the cus-tomer claims damages which are based on intent or gross negligence, including intent or gross negligence by our representatives or vicarious agents. As far as TRITEC is not charged with any intentional or grossly negligent breach of con-tract, the liability for damages shall be limited to the foreseeable, typically occurring damage or, respectively, excluded by agreement for countries in which this is permitted.2. However, liability for damages shall be limited in all of the cases to the foresee-able, typically occurring damage, unless such a limitation violates mandatory law.3. Liability for culpable injury of life, limb or health shall remain unaffected; this also applies for the absolute liability under the Produkthaftungsgesetz (Product Liability Law). 4. As far as liability by TRITEC is excluded or limited, this shall also apply for the personal liability of its executive personnel, workers, employees, representatives and vicarious agents.

§ 8 Reservation of Ownership1. TRITEC shall reserve ownership in the goods until full payment of the purchase price. As far as permitted by the respectively applicable legal system, TRITEC shall reserve ownership in the goods – regarding contracts with companies – until the receipt of all payments from the business relationship with the customer. 2. In case of the customer‘s conduct in violation of the contract – in particular, in default of payment – TRITEC shall be entitled to repossess the goods. This claim for restitution of property shall only be considered a rescission of contract if TRITEC explicitly declares it in writing. After repossession of the goods, TRITEC shall be entitled to their realization; the realization proceeds shall be credited to the customer‘s liabilities – minus reasonable costs of realization.3. The customer shall be obligated to handle the goods with care; in particular, the customer shall be obligated to adequately insure them, at his/her own costs, for their reinstatement value against damage due to fire, water, and theft. If maintenance and inspection work is required, the customer shall carry them out in due time at his/her own costs.4. In the event of attachment/execution or other interventions by third parties, the customer shall notify TRITEC immediately in writing so that TRITEC can take corresponding defense measures. As far as a third party is unable to reimburse TRITEC for the legal and extrajudicial costs of a defense measure, the customer shall be liable for the loss which we incurred.5. The customer shall be entitled to further sell the goods in proper business pro-cedures; however, the customer already now assigns to TRITEC all receivables in the amount of the final invoice total (including sales tax) of the TRITEC receiva-ble which he/she accrues from the further sale versus its buyers or third parties, irrespective of whether the goods have been further sold without or after processing. The customer shall remain entitled to collect this receivable even af-ter the assignment. TRITEC‘s right to collect the receivable itself shall remain un-affected thereby. However, TRITEC agrees not to collect the receivable as long as the customer meets his/her payment obligations from the proceeds obtained, is not in default of payment and in particular, as long as no application for the institution of settlement or insolvency proceedings has been made, or as long as there is no payment stop. But if this is the case, TRITEC may demand that the customer discloses to TRITEC the assigned receivables and their debtors, provides all necessary information for the collection, hands over the pertinent docu-ments, and informs debtors (third parties) of the assignment.6. TRITEC agrees to release the securities to which it is entitled upon the custom-er‘s request insofar as the realizable value of our securities exceeds the receiva-bles to be secured by more than 10 %; TRITEC shall be responsible for selecting the securities to be released.7. For leased articles, the customer shall be obligated to return the leased object on-time and in proper, clean and functioning condition. The customer shall accept full liability for any damage due to improper use, or theft, vandalism, ac-cidents or the like. Every customer shall take care on its own for any repairs. If articles are lost which are necessary for the functioning of the leased article, they shall be principally invoiced to the customer. The customer shall take out insur-ance for the leased articles.

§ 9 Design ChangesWe reserve the right to make design changes at any time; however, we shall not be obligated to make any such changes even on already delivered products.

§ 10 SecrecyUnless otherwise explicitly agreed upon in writing, the information submitted to

us in connection with orders shall not be considered confidential.

§ 11 ExportAny re-export of delivered goods from the territory of the European Union shall be subject to the country-specific export provisions and is possibly not allowed without an official permit. Export of the delivered goods from the territory of the European Union shall require the supplier‘s written consent; irrespective thereof, the customer shall obtain on his/her own any official import and export permits. The customer shall be responsible for compliance with the pertinent provisions up to the end consumer.

§ 12 Final Provisions1. These General Terms and Conditions and the entire legal relations between the customer and TRITEC shall be governed by the law at the registered seat of the company where the order has been placed, with the exclusion of the Vienna UN-Convention on Contracts for the International Sale of Goods. 2. Legal venue for any disputes resulting directly or indirectly from the contrac-tual relationship shall be exclusively at the registered seat of the company where the order has been placed.3. Above, the respectively acting enterprise of the TRITEC Group has been desig-nated as TRITEC. The contracting party shall acknowledge this and agrees that, with this type of designation, the individual enterprises of the TRITEC Group do not trigger any group liability. 4. Should any provision in these General Terms and Conditions or a provision within the scope of other agreements be or become invalid, the validity of any other provisions or agreements shall not be affected thereby. Instead of the invalid provision or to fill a gap, a regulation shall be agreed upon which – as far as legally allowed – comes closest to what the contracting parties had wanted.5. The General Terms and Conditions are translated in several languages. The German version shall be ruling in case of any inconsistencies or in case of doubt.

General Terms and Conditions by the TRITEC Group for CommerceIssued: October 2008

189

TRITEC International AGHeadquartersHerrenweg 604123 Allschwil / Basel, SchweizP +41 61 699 35 55F +41 61 699 35 [email protected]

TRITEC Deutschland GmbHBasler Straße 11579115 Freiburg i. B., DeutschlandP +49 761 400 689 22F +49 761 400 689 [email protected]

TriEnergy GmbH / TRITEC Logistics Boschstraße 2 / 471287 Weissach, Deutschland P +49 7044 90379-0F +49 7044 90379-90

TRITEC España Trienergy Technology S.L.Edifici CIM VallésOficina 035, Carrer del Calderí s/n08130 Santa Perpetua de MogodaBarcelona, EspañaP +34 93 560 65 39F +34 93 574 36 [email protected]

TRITEC France SARLParc d’Activités de l’Aéroport55, imp. Jean-Baptiste Say34470 Pérols / Montpellier, FranceP +33 467 686 464F +33 499 533 [email protected]

TRITEC Contacts

TRITEC AG | SchweizHerrenweg 604123 Allschwil / Basel, SchweizP +41 61 699 35 35F +41 61 699 35 [email protected]

TRITEC AG | SchweizZweigniederlassung AarbergHeckenweg 293270 Aarberg, SchweizP +41 32 665 35 35F +41 32 665 50 [email protected]

TRITEC Italia s.r.l.Via Dei Ghivizzani, 1743 Int.E55040 Piano di Mommio (LU), ItaliaP +39 0584 363 535F +39 0584 363 [email protected]

TRITEC BelgiëTriEnergy GmbHBoschstraße 2 / 471287 Weissach, Deutschland P +49 7044 90379-0F +49 7044 90379-90 [email protected]

TRITEC ÖsterreichIn der Au 294644 Scharnstein, ÖsterreichP +43 7615 30522F +43 0584 [email protected]

190

TRITEC International AG, a member of TRITEC Group.

The German version is binding.The content is subject to change without prior notice.The current version is available from www.tritec-energy.com.

Imprint

© TRITEC International AG | Version 20100512

www.tritec-energy.com

tritec product catalogue enu

Documents

solar systems

solar energy

mounting systems tristand

large photovoltaic systems

gridconnected systems

standalone systems page

photovoltaic system

clean energy