trimble pipedesigner 3d® software...locally with the pipedesigner 3d software. note: if you are...

MANUFACTURER DATABASES

Tr imble ®®PipeDesigner 3D

Revision A

Software

LEGAL NOTICES

Copyright and Trademarks

©1999 - 2014 Trimble Navigation Limited. All rights reserved.

Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other

countries. PipeDesigner 3D is a registered trademark of Trimble Navigation Limited. All other trademarks are the property of their

respective ow ners.

Englew ood Office

Trimble Navigation Limited

116 Inverness Drive East, Suite 210

Englew ood, Colorado 80112

(800) 234-3758

Release Notice

Trimble® PipeDesigner 3D®

Manufacturer Databases

Created Wednesday, November 19, 2014, 12:15 PM

The topics w ithin this help system are subject to change w ithout w ritten notice. Companies, names, and data used in any

examples are f ictitious.

Screenshots included in the help topics may not be exactly as in the softw are application.

This help f ile, or parts thereof, may not be reproduced in any form, by any method, for any purpose, w ithout the w ritten consent

of Trimble Navigation Limited.

PipeDesigner 3D Manufacturer Databases

2

PipeDesigner 3D® Manufacturer Databases


3

PipeDesigner 3D® Manufacturer DatabasesTrimble has agreements with several manufacturers to provide you with data specific totheir fittings. These databases are available on the Trimble MEP website.

You can easily add this data to your master PipeDesigner 3D database using the QuickMerge Utility.

The manufacturers databases are available in the SQL Server backup format, making itsimple to add more pipe/fittings to your database.

The database file names describe each database accurately, making it simple todetermine which one you want to merge.

http://mep.trimble.com/support/downloads/manufacturer-libraries

Preliminary Steps


4

Preliminary StepsPerform the following procedures before beginning the download and merge installation.

Verify Autodesk Application

Before downloading and installing any manufacturer databases verify that you have acompatible Autodesk® application installed.

Verify PipeDesigner 3D Version

The manufacturer databases are version-specific. Make sure you download a databasecompatible with your version of PipeDesigner 3D.

Open the PipeDesigner 3D Data Editor, go to Help > About PD3D to verify yourinstalled version number.OROpen the CAD side of the PipeDesigner 3D and go to PD3D™ Tools / Help / About.

Windows Applications

Make sure all Microsoft Windows® based applications on the server are closed,including e-mail software.

File Download

The manufacturers databases are in a zip file format. You must unzip the file in order tomerge the database file into your PipeDesigner 3D system.

Dow nload Procedures


5

Download Procedures1. Locate the database you want to download. Read the associated notes and then click

Download to copy the file to your computer.

2. Typically, the database is downloaded to your Download folder.

Note: If prompted, click Save. Do not attempt to run the file. The file is downloaded in azip file format. You must unzip the file before proceeding.

3. Continue to the QuickMerge Procedures topic for additional steps.

Tip - The file is downloaded in a zip file format. You must unzip the file beforeproceeding.

QuickMerge


6

QuickMerge

This QuickMerge utility allows you to merge data into the PipeDesigner 3Dsoftware database from other sources. The source must be in the proper format inorder to process a merge. You can also use QuickMerge to export data, that canthen be merged into another PipeDesigner 3D software database.

Quick Steps: PipeDesigner 3D Data Editor / Tools / QuickMerge

Start menu / Trimble PipeDesigner 3D / QuickMerge

Definitions

The following definitions are used in the instructions below.

Source DatabaseThis database contains the data you want to merge into the Target database.

Target DatabaseThis is the database you will be merging the source database into.

Navigation

QuickMerge is set up as a wizard. Each screen allows you to define and/or select theappropriate information required. There are common buttons in the QuickMerge wizardscreens that allow you to easily navigate the wizard.

Advances to the screen directly following the one you are on. Youmust complete all required information on the current screen beforeyou can go to the next screen

Directly below the window label, you can click to return to theprevious screen(s).

Clicking Cancel discontinues the merge process and closes theprocedure/screen.

QuickMerge


7

Information

Before you begin the merge process, review the general information below.

The data available for merge is based on the information included in the sourcedatabase.

The QuickMerge procedure allows you to "pick and choose" the data you want mergedfrom the source into the target database.

If you did not merge all data in the initial procedure, you can merge additional datafrom the source into the target immediately after the initial merge is complete.

You can merge additional data into your target database or overwrite existing data.

Caution - Use caution when using the overwrite option. This procedure actuallydeletes matching items that are in both the source and target database. Those itemsare then recreated in the target database from the source. It is possible to lose datafrom your target when using this option.

QuickMerge will add new items and folders; however, new item detail will not bemerged into and existing item unless you use the overwrite option.

QuickMerge


8

Source Database

The QuickMerge From Database information screen allows you to define the source data.This is the data you will be merging into the target database.

Trimble recommends that you review the General QuickMerge Information beforebeginning this procedure.

Source Database

Tip -

If you are merging source data from a Microsoft SQL Server database, you mustrestore this data before you can proceed. Refer to the Restore Utility topic in theonline help file for instructions.

If you are merging in the Trimble Manufacturer Databases, see the ManufacturerDatabases Guidance topic for some helpful hints.

1. Open the QuickMerge utility using one of the methods in Quick Steps above. TheWelcome screen displays. Read the information on-screen. Click Next.

2. In the QuickMerge From Database information screen, complete the followingfields:

Database TypeClick and select the appropriate Database Type from the list. Your selectiondepends on the format used in the source. QuickMerge supports the followingformats: Microsoft SQL Server and SQLite.

Tip - Microsoft SQLite and VistaDB do not require processing a restoreprocedure. These formats can be immediately merged into your PipeDesigner3D software database.

For Microsoft SQL Server formats onlyComplete the following procedures if the source is this database type.

Server Name

Click . This will automatically select the Microsoft SQL Server installedlocally with the PipeDesigner 3D software. Note: If you are using aMicrosoft SQL Server on the network, click to select the appropriateserver from the list or if you know the name of the network files, you canenter this information manually. It must be entered accurately or theconversion will not recognize the server.

QuickMerge


9

Use SQL Server AuthenticationClick this radio button.

PipeDesigner 3D LoginNote: The login information below pertains to the Trimble installedinstance of the Microsoft SQL Server. If you are using another installedserver, your login will be different. Contact your System Administrator ifyou have any questions.

Login: sa

Password Trimble1

5. Click to select a Source Database file name. Click Next.

Note: Depending on the format of your source database, your selections/screenmay display differently than in the graphic.

6. Click Next. The QuickMerge To Database information screen opens. This screenallows you to define the target database. Click here for further instructions. ORIf you are creating a new source database (rather than merging data into a master),see QuickMerge Exports for detailed information.

QuickMerge


10

Target Database

The QuickMerge To Database information screen allows you to define where you want tomerge the source data to. You must complete the procedures in the QuickMerge Sourcetopic before you can enter information in this screen. You can also create a new databasewith specific data to provide others if needed. The procedures are similar to merging intothe target. Please refer to the QuickMerge Export/New Databasefor more details.

Target Database

Tip - If you are merging in the Trimble Manufacturer Databases, see theManufacturer Databases Guidance topic for some helpful hints.

1. In the QuickMerge To Database information screen, complete the following fields:

Database TypeClick and select the Database Type based on the format you are currentlymerging into. QuickMerge supports the following formats: Microsoft SQL Serverand SQLite.

For Microsoft SQL Server formats onlyComplete the following procedures if the source is this database type.

Server NameClick . This will automatically select the Microsoft SQL Server installedlocally with the PipeDesigner 3D software. Note: If you are using aMicrosoft SQL Server on the network, click to select the appropriateserver from the list or if you know the name of the network files, you canenter this information manually. It must be entered accurately or theconversion will not recognize the server.

Click Use SQL Server Authentication.

PipeDesigner 3D LoginNote: The login information below pertains to the Trimble installedinstance of the Microsoft SQL Server. If you are using another installedserver, your login will be different. Contact your System Administrator if youhave any questions.

Login: sa

Password Trimble1

2. Select a Target Database by clicking to select the appropriate target database

QuickMerge


11

from the list. Use care when selecting the target to ensure you are merging datainto the proper database.

Note: You can also create a new database that includes the source data. SeeQuickMerge Exports for detailed instructions on this procedure.

3. Click Next. The Perform the QuickMerge displays. This screen allows you to selectthe items you want merged from the source into the target database. Click here forfurther instructions.

QuickMerge


12

Merge Selections

The Perform the QuickMerge screen allows you to select the items you want merged fromthe source into the target database. You must complete the procedures in the QuickMergeSource and the QuickMerge Target topics before proceeding with the instructions below.

Data Selections and Processing

Tip - If you are merging in the Trimble Manufacturer Databases, see the ManufacturerDatabases Guidance topic for some helpful hints.

1. In the Perform the QuickMerge screen, select the appropriate checkboxes based onthe data you want to merge from the source into the target.

Include All ItemsThis checkbox is selected by default . When selected, all items in the sourcedatabase will be merged into the target database. If you want to select onlycertain items, you can clear this checkbox and the Select the items to include panebecomes active.

Select the items to include paneYou can select the checkboxes next to specific items or item types to merge all tothe target database. Keep in mind that if you select Parts Lists, all associatedfittings, valves, and connection items are automatically selected.

Tip - Depending on the size of your source database, this process may takeseveral minutes. In the dialog:

Click Yes if you want to proceed. All ends will be automatically selected andmerged.

If you click No, you must select the ends you want to merge manually.

ORYou can click next to each item(s) and then select only the specific item youwant to merge to the target. Note: The naming convention next each checkboxrepresents the item and (folder) name.

QuickMerge


13

Tip - All Other Items includes ends, equipment, and end connection rules. If you selected

piping items that already have ends included, these will automatically be included in the merge. Ifyou want to merge in additional ends, you must select these separately.

3. Click on the appropriate radio buttons based on how you want QuickMerge to handleitems in both the source and target databases.

For Piping itemsthat already exist

Options

OverwriteWhen you click this radio button, any items that are found in theboth the source and target database will be overwritten in thetarget.

IgnoreQuickMerge will ignore all items that exist in both the sourceand target database and merge only those items that do notalready exist in the target/

Merge missing sizesIf the source database includes sizes that do not exist in thetarget, clicking this radio button will merge those sizes into thetarget. Note: This option merges only the missing sizes. You canalso use the Overwrite option to merge missing sizes, as well asadditional data, into the database. Use this option with care.

For all other itemsthat already exist

Options

OverwriteWhen you click this radio button, any items that are found in theboth the source and target database will be overwritten in thetarget.

IgnoreQuickMerge will ignore all items that exist in both the sourceand target database and merge only those items that do notalready exist in the target/

QuickMerge


14

Caution - Use caution when using the overwrite option. This procedure actuallydeletes matching items that are in both the source and target database. Those itemsare then recreated in the target database from the source. It is possible to lose datafrom your target when using this option.

4. Click . The merge process begins. A progress indicator displays atthe bottom of the screen.

5. When the merge is complete, you can continue to merge additional data from thesource to the target if desired. If your merge is complete, click Close.

If you are using QuickMerge to create a new source database, see the Export/NewDatabase topic for additional instructions before proceeding.ORTrimble recommends that you review the merged data in the PipeDesigner 3D DataEditor to ensure the results are as you expected.

QuickMerge


15

Manufacturer Database Guidance

This topic provides helpful information to assist you in merging in data from the TrimbleManufacturer databases available on our website.

Source Database

The Source Database is the Manufacturers Database that you want to merge into thePipeDesigner 3D software. These databases are provided in an SQLite format so they canbe merged easily simply by selecting the DB file in the Database Type field. A password isnot required.

The graphic below illustrates how your screen might display. Note: The Database fileinformation is dependant on the location and file you are merging.

Target Database

The Target Database is where you want to add the Manufacturer data. Typically, this willbe your master PipeDesigner 3D database, but you may have setup other databases. Makesure you know where you want this data stored prior to selecting a target database.

The graphic below illustrates how your screen might display. Note: The WindowsAuthentication and Database information is dependant on your system and where you wantto add the data.

http://mep.trimble.com/support/downloads

QuickMerge


16

Selections for Merge

Selecting options in the Perform the QuickMerge screen defines how the Manufacturersdata will be merged into the PipeDesigner 3D software. The following settings willgenerally be used when merging in this data:

Include All Items

For piping items that already exist

For all other items that already exist

Export/New Database

Caution - Exporting or Creating a new database is not typically used when merging inManufacturers Databases. If you choose to use this option, your resulting database willinclude only the data from the Manufacturer based on the database file you have selected.No other PipeDesigner 3D software data will be included.

QuickMerge


17

Exports/New Database

The QuickMerge utility allows you the flexibility to create a new source database withspecific information you can then provide to another individual. This procedure also workswell if you have created data in a stand-alone of the PipeDesigner 3D software (or offsite)and want to add it to your master database.

The procedures are similar to merging data into a target database; however, to properly create the new source, this topic contains instructions specifically related to creating anew database.

Create New Source Database

Tip - If you are merging in the Trimble Manufacturer Databases, see the ManufacturerDatabases Guidance topic for some helpful hints.

1. In the QuickMerge To Database information screen, complete the following fields:

Database TypeClick and select the Database Type based on the format you are currentlymerging into. QuickMerge supports the following formats: Microsoft SQL Server,SQLite, and VistaDB.

Tip - When using a Microsoft SQL Server format for your new source database, you must

back up the newly created source file before providing it to another. Before QuickMerge canbe performed, the backed up file must be restored. See Backup Utility and Restore Utilitytopics for instructions.

For Microsoft SQL Server formats only

Server NameClick . This will automatically select the Microsoft SQL Server installed locallywith the PipeDesigner 3D software. Note: If you are using a Microsoft SQLServer on the network, click to select the appropriate server from the list or ifyou know the name of the network files, you can enter this informationmanually. It must be entered accurately or the conversion will not recognize theserver.

Click Use SQL Server Authentication.

PipeDesigner 3D LoginNote: The login information below pertains to the Trimble installed instance ofthe Microsoft SQL Server. If you are using another installed server, your loginwill be different. Contact your System Administrator if you have any questions.

QuickMerge


18

Login: sa

Password Trimble1

2. If you wish to create a new database that includes new source data, enter a newname in the Database field. Note: The screenshot below illustrates using an SQLiteformat. Depending on the format you selected, your screen may display differently.

3. Click Next. The Perform the QuickMerge displays. This screen allows you to select theitems you want merged from the source into the target database. Click here for furtherinstructions.

4. If you selected the Microsoft SQL Server format, you will need to backup the newsource database prior to distributing. See Backup Utility for instructions.

Database Format Requirements

Depending on the format you used when creating your new source, proceed as follows:

Microsoft SQL Server

You must restore the file to the PipeDesigner 3D application prior to attempting to

QuickMerge


19

merge the new source into the target. See the Restore Utility topic for detailedinformation on this procedure.

After the file has been restored, you can merge the source data into the targetdatabase.

SQLite

You must enter the full path and file name (including file extensions) when using one ofthese formats.

Database Format File Extension

SQLite db

Password Protection

The formats above allow you to password protect the resulting database.

Enter a Password in the QuickMerge To Database Information screen if you wish topassword protect the new file.

If you choose to password protect the new source, you must provide thisinformation when you pass the data on.

Merge Source > Target

See the QuickMerge Source topic for procedures on selecting the source database.

The QuickMerge Target topic provides you with the information you need to mergethe data in the source to the target database.

trimble pipedesigner 3d® software...locally with the pipedesigner 3d software. note: if you are...

Documents