transmisor indicador de presion - microcyber ncs-pt105 ii dp

6
Advanced Systems for PROCESS AUTOMATION

Upload: jorgemas1

Post on 16-Feb-2016

517 views

Category:

Documents


17 download

DESCRIPTION

Transmisor Indicador de Presion - Microcyber NCS-PT105 II DP

TRANSCRIPT

Advanced Systemsfor PROCESS AUTOMATION

1.1 Brief introdution

As a new generation of miniaturized intelli--

PT105 II S series pressure transmitter has a sensor optimized for pressure measurement.It is available in FF H1, PROFI-BUS PA, PROFIBUS DP or HART protocol. This transmitter has high accuracy, better reliability and intrinsically safety.

NCS-PT105 applies to the pressure measure-ment of liquid, gas or steam and can meas-ure the pressure signal, absolute pressure, and gauge pressure. NCS-PT105 broadly applies to production process automation

industry, metallurgy, electric power and light industry, etc.

NCS-PT105 II Series

PIEZORESISTIVE SMART PRESSURE AND LEVELTRANSMITTERS WITH HART, FF, PROFIBUS PAAND PROFIBUS DP FIELDBUS

1.2 Performance characteristic

Ø Excellent performance:

High precision: ±0.075%(20℃,range rate10:1)

Stability: ±0.1% of maximum range/year

High range rate: 100:1

Ø Digital communication: HART, FF, PROFIBUS DP and PROFIBUS PA protocols

Ø Multi sensor: Absolute pressure (SG) Gauge pressure (SA)

Ø Multi-output: 4~20mA, digital signal

Ø Compensation: automatically environmental temperature compensation

Ø Parameter setting: zero/span transform, failure alarm, units transform, trim,etc.

Ø Self-diagnoses: states diagnoses of sensor, A/D transform, memorizer, power supplier and failure alarm of software and hardware, etc.

9VDC~32VDC (FF, PROFIBUS DP, PROFIBUS PA)11.9VDC~32VDC (HART)11.9VDC~30VDC (Explosion prevention area)11.9VDC~17.5VDC (Intrinsically safe)Analog: 4~20mA, 2 linesDigital: HART, FF, PROFIBUS DP and PROFIBUS PA signal0Ω~1500Ω (generally)250Ω~550Ω (HART)Isolation voltage of input and output: 500Vrms (707VDC)

5%RH~100%RH≤5s0.2sTime constant: 0.25s~32s<0.16cm3

Range 2: 1000psi (6.89MPa)Range 3~8: 2000psi (13.8MPa)

Range 4~7: 4500psi (31.0MPa)

Range 3~8: 2000psi (13.8MPa)Range 9: 4500psi (31.0MPa)Range 0: 7500psi (51.7MPa)Range 4: 58psi (400KPa)Range 5: 218psi (1500KPa)Range 6: 435psi (3000KPa)

6 bits digital or 5 bits characters LCD display (option)Operation temperature: -40ºC~85ºC (without LCD) -30ºC~70ºC (with LCD)Storage temperature: -40ºC~100ºC (without LCD) -40ºC~85ºC (with LCD)

NCS-PT105 II Series

PIEZORESISTIVE SMART PRESSURE AND LEVELTRANSMITTERS WITH HART, FF, PROFIBUS PAAND PROFIBUS DP FIELDBUS

IP65 / IP67 / IP68

NCS-PT105 II Series

PIEZORESISTIVE SMART PRESSURE AND LEVELTRANSMITTERS WITH HART, FF, PROFIBUS PAAND PROFIBUS DP FIELDBUS

DP DPDP

NCS-PT105 II Series

PIEZORESISTIVE SMART PRESSURE AND LEVELTRANSMITTERS WITH HART, FF, PROFIBUS PAAND PROFIBUS DP FIELDBUS

NCS-PT105 II Series

PIEZORESISTIVE SMART PRESSURE AND LEVELTRANSMITTERS WITH HART, FF, PROFIBUS PAAND PROFIBUS DP FIELDBUS

Av. Enrique Meiggs 245 - Parque Industrial del Callao - Perú / Telf: +51 1 517 0360Fax: +51 1 517 0375 / Sucursales: Trujillo - Arequipa - Talara - SechuraEmail: [email protected] / www.ic-controls.com

REPRESENTANTE EXCLUSIVO PARA EL PERÚ