transitions · pv ssrs rs rnsns nrn n te +44 (0) 161 627 4222 a +44 (0) 161 627 4333...
TRANSCRIPT
STAIR NOSINGS
PVC ACCESSORIES & TRIMS
TRANSITIONS & ENTRANCE MATTING
Uniclass
CI/SfB
L43224 + L5391
(43)+(44) X
Colours shown here are for guide purposes only. For an exact match to your requirements, always request a sample.
WINTER 2017
PRO
DU
CT D
ATA
SHEE
T –
TRAN
SITI
ON
S
TRANSITIONS (BEVEL STRIPS & RAMPS / DUAL & RAMPED EDGE JOINT COVERS / TOPLINE FLOOR TRIMS / COVER JOINTS)
Product Description PVC Transition profiles are used widely in commercial and public buildings. They are designed to protect the edge of floor coverings from damage, reduce trip hazards and provide a smooth transition at joints between different floor coverings. For technical information please email [email protected].
DimensionsProfile lengths vary depending on profile, for profiles lengths please visit www.quantumflooring.co.uk.
Tops (QTL36/ QTR42/ QTR45) Colour RangeInc. Light Reflectance Value (LRV)
6 Black 11 Spruce
10 Rustic 15 Flint
10 Peat 26 Light Grey
11 Regency
Trims/ Ramps/ Bevels Colour RangeInc. Light Reflectance Value (LRV)
6 Black 29 Cloud Grey
7 Dark Brown 81 White
15 Charcoal
LVT Transitions Finishes
Gold Polished Anodised
Silver Polished Anodised
Satin Etched
Note: Can’t find the colour you are looking for? We offer a colour matching service (subject to volumes) call our customer care team on +44 (0) 161 627 4222 to find out more.
RangeTopline Floor Trims
Bevel Strips
Ramps
Dual Edge Joint Covers Ramped Edge Joint Covers
LVT Transitions
Cover Joints & Shower Threshold
QT450 QT600 QFT450 QFT600
QAB1 QAB2 QVB1 QVB2 QVB3 QVB4
QMS1 QMS2 QMS3
QTL36 QTR42 QTR45
QT200 QT250 QT320
QT200/50 QT450/25
QD35/5 QR40/5
QD35/7.5
QTR10
QTP38T (pre-drilled) Cover Joint with or without tread insert
QLVT30R (pre-drilled)Cover Joint for LVT insert
QCJ50
QLVT30T (pre-drilled)Cover Joint for LVT insert
QCJ75
QR46/7.5
6
QAB1
9
QAB2
36
QTL36
42
QTR42
45
QTR45
8.5
QVB1
12
QVB4
16
QVB2
6
QVB3
25
2
QT200
50
2
QT200/50
25
2.5
QT250
25
3.2
QT320
33
4.5
QT450
25
4.5
QT450/25
33
4.5
QFT450
38
6
QFT600
38
6
QT600
63
3
QMS170
28
10
QMS2
40
2.5
QMS3
35
5 9
QD35/5
35
7.511.5
QD35/7.5
40
5
QR40/5
20
46
7.5
QR46/7.5
53
38
2.5
QTP38T
53
30
27.5
QLVT30R
46
30
2.52.5
QLVT30T
50
2.5
QCJ50
75
2.5
QCJ75
120
310
QTR10
STAIR NOSINGS
PVC ACCESSORIES & TRIMS
TRANSITIONS & ENTRANCE MATTING
tel: +44 (0) 161 627 4222 fax: +44 (0) 161 627 [email protected] www.quantumflooring.co.uk
Quantum Profile Systems LtdSalmon Fields, Royton, Oldham, OL2 6JG, UK
Uniclass
CI/SfB
L43224 + L5391
(43)+(44) X
WINTER 2017
Technical DataProduct Composition
Flexible Products:Polyvinylchloride (PVC)
Rigid Products:Unplasticised Polyvinylchloride (UPVC)
(Plasticisers)
Inert fillers
Flame retardants
QAB1 & QAB2:
Aluminium Alloy
Physical and Chemical Properties
Form: solid / rigid
Colour: various
Odour: slight odour
Solubility: insoluble in water
Decomposition: will decompose at temperatures above 150ºC
Safety DataPlease review ‘Safety Data Sheet – PVC’ or ‘Safety Data Sheet – CC’.
Maintenance Note: Do not use solvents1. Clean with a mild detergent
solution.
2. Dry off if necessary with lint free cloth.
3. Only reopen to traffic once dry.
Installation Most PVC products should be applied with a contact adhesive from a leading supplier. Please ensure the surfaces are clean, dry, smooth and free from grease or dust. It is always advisable that the walls/floors are primed first. Follow the instructions for the application of the adhesive very carefully.
Allow the PVC product to acclimatise to room temperature prior to installation.
Bevel Strips & RampsApply the adhesive to the floor, the edge of the floor covering and the bottom of the bevel edge.
Dual Edge Joint CoversApply adhesive to the floor and base of the profile. Fit the ‘thinner’ floor covering under flap with foot/flange and the ‘thicker’ floor covering on the other side.
Ramped Edge Joint CoversApply adhesive to the floor and base of the profile. Fit the floor covering under flap with foot/ flange, with ramp down to the other side.
‘Topline’ Floor TrimsScrew the pre-drilled bases to the floor between the two floor coverings. Position the tops in the base and tap into place using a rubber mallet.
Cover JointsLeave either a 50mm or 75mm gap between sheets of vinyl. Place Cover Joint in gap and weld in to place.
Warranty Quantum Flooring Solutions warrants that all Quantum Flooring products produced and despatched from its works in Oldham, Lancashire are free from material defects and are fit for purpose when fitted strictly in accordance with the manufacturer’s instructions.
This warranty is applicable to Quantum Flooring products that have been correctly specified, installed and maintained. Company leaflets, brochures and data sheets (hard copy and online) are available, and these give details of all necessary and relevant requirements.
PRO
DU
CT D
ATA
SHEE
T –
TRAN
SITI
ON
S