tools required materials required - boomba racing › content › mustang shifter bracket.pdf ·...
TRANSCRIPT
FORD MUSTANG
SHIFTER BRACKET
2Remove the nuts holding the shifterbracket.
3
Pull the shifter assembly down todisengage the bracket and the threadedstuds. Pull the shifter bracket toward theback of the car to remove it from theshifter.
4
Remove cover from the Boomba RacingShifter Bracket.
5
Place the rubber washers on the top ofthe shifter bracket.
6
Place the shifter bracket on the top of theshifter assembly.
7
Push the shifter assembly up and alignthe mounting studs. Secure the bracket tothe body. 8
9
Install the shifter bracket cover.
10
MATERIALS REQUIRED
None
TOOLS REQUIRED
M10 socket wrench5 mmallen wrench
1
Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1
When lifting the caralways use stands tosecure the car.