tm - united steel structurals (p) ltd

™

UNITED STEEL & STRUCTURALS PVT. LTDPre Engineered Metal Buildings | Heavy Industrial Steel Structures

Structural Floor Decking Sheets | Roofing / Cladding Sheets

Cold Formed C & Z Sections

ISO 9001 - 2008 Certified Company

TM

2

We offer complete, cost effective

turnkey solutions for

Pre Engineered Metal Buildings &

Heavy Industrial Steel Structures

TM

USS Structural Floor Decking Sheets

USS Roofing & Cladding sheets

USS Cold Form ‘C’ and ‘Z’ Sections

Other USS Products:

Taking United Steel & Structurals Pvt. Ltd as one of the top 20 companies both in terms of Quality and Value with

turn over in Asia & the South East, exclusively in Pre Engineered/fabricated Steel Buildings Industry with all kinds of

complexity like multiple EOT cranes, Mezzanine floors, Multilevel Car Parks & High Rise Buildings, within the next

10 years time by adopting all the technological developments in design as per global standards and systems in all

the key areas.

Play a major part in increasing the per capita consumption of steel in India by providing innovative, value -added

building solutions.

To take all efforts to ensure that the benefits of Steel building concept is confined not only to industrial and

commercial sector, but also reaches all the levels of the society including all kinds of residential buildings.

To constantly strive to achieve the aim of making it affordable for a common man in our country to buy a steel

house.

To motivate one and all to make this dream come true, so that together we will achieve the end result of making our

society and environment more cleaner and greener.

Offer innovative products and services to customers at reasonable prices on

time, every time, without ever, ever compromising on quality.

3

ISO 9001-2008TM

UNITED STEEL & ™

STRUCTURALS PVT. LTD

USS PRE-ENGINEERED METAL BUILDINGS

Pre-engineered metal building system is widely accepted

across the globe as an efficient alternative to conventional

buildings. It is the most affordable and flexible building

system ideal for any low rise Industrial, Institutional or

commercial application. The system offers excellent features

such as speed, quality, strength and value making it the most

preferred building system in the world. PEB, as the system is

popularly known, offers many advantages:

Withstands severe climatic conditions. Weather resistant, earthquake resistant.

Low initial investment, minimal maintenance costs

Roof and wall systems are energy efficient. The system is 100% environment friendly as all the materials used can be recycled.

Large clear spans. Easy Renovation, Expansion or modification. Can be dismantled and relocated.

Offers new solutions and opportunities, allowing engineers to expand their artistic expression and create some of the most challenging and unique buildings.

Installation time is considerably reduced as the erection techniques involved are very precise and simple.

Strength & Durability:

Lower Investment Costs:

Environment friendly:

Flexibility in expansion:

Architectural versatility:

Faster occupancy:

Pre Engineered Metal Building System:

Low rise Industrial metal Buildings

Medium & Big Ware Houses

Assembly floors with EOT crane

Logistics Buildings

Cold Storage

Textile Processing Units

Fuel Station Canopies

Airport Buildings & Aircraft Hangars

Sea Ports

Marriage Halls

Multi Storied Commercial / Trade Centers

Multi Level Steel Car Parks

Railway Station / Bus Station Shelters

Government Workshops

All kinds of Manufacturing Units

Closed Container Terminals

MES Buildings

School Buildings

Automobile Ancillary Units

Sports Complexes and Stadia

Applications:

United Steel & Structurals Pvt. Ltd.™ was started by a team of highly qualified structural steel engineers with the

aim of providing cost effective turnkey solutions to the customers for Pre engineered Metal Buildings & Heavy Industrial

Steel Structures. The Company engages itself in design, manufacture, supply and installation of USS Pre-Engineered Metal

buildings,™ which are functional, affordable and innovative in design and appearance, conforming to international quality

standards. Every metal Building is designed for the customer’s specific use, loading, size and to meet the requirements of the

project's location for rain, wind, snow and seismic coding. The company has the expertise, creativity and dynamic

leadership with substantial experience in the field of steel and structural engineering. The USS Pre-Engineered Systems

Manufacturing unit is one of the country’s largest and is equipped with state-of-the-art machines. With access to

latest technology, meticulous planning and execution, following best practices in the business, we assure you that we can

process and deliver orders to your utmost satisfaction, in time, every time.

4

Design

Applicable Codes & Standards

An efficient Pre Engineered Building System is computer assisted, and designed for a specific use. Computerised design allows

buildings to be tailored to individual customer’s requirements. The complete building system is Pre Engineered to facilitate easy

production & assembly on site. United Steel & Structurals Pvt. Ltd. is one of the very few companies around the world using

State-of-the-Art Design Software for the design and detailing engineering. With STAAD PRO and STRUTS Design Software (Indian

and American Versions) updated to the latest versions, handled by highly qualified structural engineers, even the most complex

structures are designed with ease. Every USS Pre Engineered Metal Building is unique in terms of its quality, affordablity and

feasibility.

Climatic conditions are different from one place to another. Unless otherwise required by local conditions, all Steel buildings are

designed and manufactured in accordance with American Codes, which are updated to the latest edition. United Steel & Structurals

Pvt. Ltd. applies the following US codes , which are recognized as the PEB standard worldwide, for designing of all steel buildings :

• Wind zone and velocity are considered and applied as per latest edition of IS875-1987 code of practice for design loads.

• Seismic loads are considered and applied as per seismic zone in the latest edition of IS1893-1984 (Revised in 2002). Seismic load

of application is considered as per the latest edition of MBMA- 1986

• Loads on the buildings are applied in accordance with the latest edition of International Building Codes, International Code

Council. Inc (IBC) 4051, West Flossmoor Road, Club Hill, IL 60478-5795, USA.

• Loads on the building are applied in accordance with low rise building system manual of Metal Building Manufactures

Association INC, (MBMA), 1300 Summer Ave, Cleveland Ohio 44115, USA, 1986 edition, 1990 supplement and the latest edition

and supplements.

• Hot rolled sections and built- up sections are designed as per the ninth edition (1989) of Manual of Steel Construction-

Allowable Stress Design of American Institute of Steel Construction. Inc (AISC)1 East Wacker Drive, Suite 3100, Chicago, Illinois-

60601-2001, USA

• Design for Cold Form Section are carried out as per the 1980 edition of Cold Formed Steel Design Manual of American Iron &

Steel Institute (AISI), 1000, 16th Street, NW, Washington, DC, USA and the latest edition and supplements.

• Welding is carried out in accordance with the 19th Edition (2004) of Structural Welding Code – Steel (AWS DLIM:2004) of the

American Welding Society (AWS), 550 NE Lejeune Road, Miami, FL 33126, USA and the latest edition and supplements.

• Wherever relevant codes are not available, the buildings are designed and constructed as per the latest edition of IS 800

TM


TM

TM

5

6

ALUMINIUM GLASS WINDOW

GABLE CLADDING

PURLIN

ROLL UP DOOR

PERSONNEL ENTRANCE

DOWN SPOUT

RIGIDFRAME

SIDE WALL GRIT

EAVE GUTTER

CANOPY

INSULATION

BARGE CAP

SKYLITE

RIDGE VENTILATOR

WALL PANEL

ROOF PANEL

ROD BRACING

SAG ROD

A Typical assembly of Pre Engineered metal Building

Exterior Cladding:

Exterior Cladding provide a weather tight envelope.

Transfer Structural Loads i.e. wind & live loads to the supporting secondary framing.

Provides lateral bracing to the roof purlins & wall girts.

Secondary Framing:

Purlins & girts receive loads from the roof & wall covering & transfer to the main building frame.

Purlins & girts provide lateral bracing to the building columns & rafter preventing lateral bulking of the compression flanges.

Rigid or Main Frame:

Moment resisting frames provides lateral stability & transfer the roof & wall loads to the foundation through anchor bolts.

Wind Bracing:

Roof & wall cross bracing provides longitudinal stability to the building.

Transfer of the wind loads acting on the building end walls to the foundation.

The synergy between the various building components in a simple Pre Engineered metal Building:


7

TM

A brief history of Pre Engineered Metal Buildings:

Concept of metal buildings originated in the United States in early 1900s. Simple industrial structures were built using truss rafters,

straight columns, sectional roofs & wall. Wedge pins were used for connections.

In late 1940s, the metal building system was recognized as a favourable method of construction over conventional methods, after

the US Army used large quantities of metal houses and storage modules during the World War II.

A decade later, Roll forming lines facilitated continuous span cold rolled Z purlins. Architectural appearance of metal buildings were

enhanced with the introduction of color coated panels and factory insulated panels. Major increase in design possibilities

contributed to the boom in metal buildings. The term pre-engineered buildings came into existence. Today the PEB system

dominates the low rise building market worldwide.

The USS PEB System uses computer aided design, precision roll forming lines for cladding and secondary members, automatic

production lines for structural sections, automatic beam welding methods and quality painting systems. All PEB system

components are made in its 100,000 sq.ft. manufacturing unit. USS PEB System is corrosion resistant , maintenance free & superior

in strength.

What is a Galvalume Sheet?

Galvalume is a steel sheet 55% aluminium zinc alloy hard dip coated. A superior corrosion protecting thin coating of resin applied on

the top of the Al -Zn coating. A clear organic acrylic resin coating is then applied & then thermally cured. A color coating is given on

the top surface for a bright appearance with a color of the customer’s choice. Galvalume sheet is ideally suited for most types of

roofing and cladding/wall applications as well as unexposed automotive parts, appliances and miscellaneous applications like

furniture, outdoor cabinetry, computer cases, gutters, pipe, etc. Galvalume steel sheet is widely used by architects, builders and

many others due to its versatility, ease of use, aesthetics and long-term performance.

Insulation:

The color coated steel Galvalume sheets can also be padded with rock wool or glass wool in various densities depending on the

functional requirements of the building. This padding or insulation can keep a difference of inside & outside temperature by about 5

to 8 Degree centigrade rendering better comfort to the people working within.

USS Roofing & Cladding Sheet:

United Steel & Structurals Pvt. Ltd. is equipped with state-of-the-art Roll forming which produces 4000 mt of Roofing & Cladding

sheets per month. It is 100% corrosion resistant, easy to maintain, lighter at the same time stronger than conventional sheets.

TM TM

ROOFING & CLADDING SHEETS

TM

COLD FORMEDC & Z SECTIONS

USS PRE ENGINEERED METAL BUILDINGS, USS ROOFING & CLADDING SHEETS & USS COLD FORMED ‘C’ & ‘Z’ SECTIONS


General Material Specification

Handling & Storage:

Drawings:

United Steel & Structurals Pvt. Ltd. ensures that structural

steel is stored out of mud and dirt and proper drainage of the

storage area is provided if required to protect from damage or

soiling by adjacent construction operations.

United Steel & Structurals Pvt. Ltd. prepares detailed general

arrangement drawings giving complete information

necessary for the fabrication of the structures. All information

is clearly given. The drawings are strictly in conformity with

the best modern practices. A marking diagram allotting

identification marks to each separate piece of steel work is

prepared. The drawing has sufficient details to ensure

convenient assembly and erection of the structure. Symbols

used for welding in the drawing is in accordance with IS:813.

Primary steel is cleaned to specification St2. One shop primer

coat of Red Oxide Zinc Chromate is applied with average dry

film thickness of 25 microns on all red steel. Shop primer

provides protection for elements while in transit and

construction, and is not intended to be for permanent

protection.

Painting - Shop Primer:

1. Built up members ASTM A 572 M Grade 345 Type 1 (or) its Equivalent

2. Hot- Rolled Members• Beam & Columns IS 2062/1999 Grade B• Tubes JIS G 3466 STKR 490 Or EN 10210-1 S355J2H• Channels IS 2062/ 1999 Grade B• Pipes / Handrails ASTM A53M Type E or S Grade A

3. Cold Formed Secondary Members• Black Steel ASTM A 607 Grade 50• Galvanized Steel ASTM A 653M SS Grade 340 Class I

4. Sheeting & Liner Panels• Galvalume Steel ASTM A 792M Grade 345Bm AZM 150

5. Mezzanine Deck Panels Cold Rolled Steel• Galvanized Steel ASTM A 653M Grade 345 Z120

6. X- Bracing Members• Rods ASTM A 615M Grade 300 (or) ASTM A 36M (or) equivalent • Angles ASTM A572M Grade 345 type I

7. Anchor Bolts ASTM A36N (or) equivalent Hot dip Galvanized ASTM A 153M Class C

8. High Strength Bolts ASTM A325M Class 8.8 Type 1 (or) equivalent Hot Dip Galvanized to ASTM A 153M Class C (or) DIN 933 Class 8.8 Hot Dip Galvanized

9. Machine Bolts DIN 933 Class 4.6/ 4.8 (or) equivalent Electro Plated Yellow Chromate

† Gutters will be usually be made from the material used for sheeting.

All the above material specifications may vary depending on the design and functional requirement of every PEB.

Sl.No. Materials Specification

8


Basic Building Parameters

Building Length:

Building Width:

Whenever possible maintain equal bay lengths throughout the building. When this is not possible make all interior bays equal and

make the end bays equal but shorter than the interior bays.

Whenever possible make building width a multiple of 3m. This is because roof purlins are spaced at 1.5 m is equal to two purlin

spacings one on each side of the ridge.

9

TM


Building Width:

Building Length:

End Bay Length:

Interior Bay Length:

No matter what primary framing system is used, the building

width is defined as the distance from outside of eave strut of

one sidewall to outside of eave strut of the opposite sidewall.

The distance between the outside flanges of endwall columns

in opposite endwall is considered the building length.

Building Length is a combination of several bay lengths.

End Bay Length is the distance from outside of the outer

flange of endwall columns to centerline of the first interior

frame columns.

Interior Bay Length is the distance between center lines of two

adjacent main frame columns. The most common bay lengths

are 7m, 7.5m and 8m. Bay length can be up to 15m by placing

Jack Beam based on the particular requirement.

Design Loads:

Special Conditions:

Unless otherwise specified USS Pre Engineered Buildings are

designed for the following minimum loads.

Roof live loads: 0.57 KN/M2

Design Wind Speed: 140Km/h

Conditions for snow loads, earthquake loads, collateral loads

or any other local climatic condition (if required) must be

specified at the time of enquiry for quotation.

Normally, loads for Pre Engineered Steel Buildings are applied

in accordance with the latest American Codes and standards

applicable to pre engineered steel buildings as mentioned

earlier.

10

Primary Built up Members (Minimum yield strength is 34.5 kn/cm)

Fabricated by using high tensile steel plates welded with

Integrated Automatic Beam Welding line as per AWS

Standards.

TYPICAL RAFTER TYPICAL COLUMN


General Bracing system:

High grade steel plate conforming to ASTM a572 grade 50

factory painted with a minimum of 35 microns (DFT) of red

oxide primer. Cable bracing is shown. Other bracing systems

are available at the options of USS’s Engineering Department.

Cable is manufactured in accordance with ASTMA 475 extra

high strength galvanized strands.

11

TM

Secondary Members: Cold Form C & Z Purlins:

USS Cold Formed C and Z Purlins provide an efficient and economical

solution for all roofing and cladding used in wide range of Industrial and

commercial applications. USS Purlins are cold formed sections

manufactured exactly to specification. The high precision, pre-punched

sections are important structural elements made from different grades of

high quality steel IS 513 / IS 10748 / IS 277.

The thickness for USS ‘C’ section varies from 1.5 mm to 6 mm & for ‘Z’ Section

from 1.5mm to 3.15mm depending on the steel framing requirement of

the building.

‘Z’ TYPE‘C’ TYPE

Finishes: 1. CRFS 2. Galvanized


The most common primary framing systems are shown. All shown symmetrical about the ridge line. Framing systems

unsymmetrical about the ridge line and Multi Span framing systems with unequal width modules are also possible. Practically any

frame geometry is possible.

Contact us for your specific requirement. Our representative will always give you the right solution.

BY OTHERS BY OTHERS

Clear Span (CS) Multi Span “1” (MS-1)

12

Multi Span “2” (MS-2) Multi Span “3” (MS-3)

Primary Framing Systems:


CRANE BRACKET & I SECTION BEAM / MEZZANINE FLOOR

BUILDING WIDTH

WIDTH MODULE WIDTH MODULE

MEZZANINE FLOOR

BY OTHERS

SAMPLE - REACTION SCHEMATICS

LEGEND:

1. DL : DEAD LOAD

2. LL : LIVE LOAD

3. WLL : WIND LOAD LEFT TO RIGHT

4. WLR : WIND LOAD RIGHT TO LEFT

5. EL : SEISMIC LOAD

6. BP : BASE PLATE

7. TPL : TEMPLATE

8. THK : THICKNESS

9. Ø : DIA

10. BBPL : BOTTOM OF BASE PLATE

11. COLL : COLLATERAL LOAD

12. TL : TEMPERATURE LOAD

Y

ZX

+M

+H

+V

+M

+H

+V

+M

+H

+V

A

A

A

MAIN FRAME AI R EM N F AM

B C D

END FRAME LINE - 1

MAIN FRAME LINE - 2

MAIN FRAME LINE - 3 & 4

+M

+H

+V

NE

MAI FRAM MAI FR EN AM

END FRAME LINE - 5

CANOPY

WIND LOAD

E F G

G

G

Multi Gable (MG)

13

TM


Composite slabs are a very practical and economical means of

creating a floor system and works particularly well in

conjunction with composite beam construction.

USS deck is designed to act as a composite deck form and

fulfills all the basic requirement that are mandatory for any

composite deck form.

Application:

1. Mezzanine floors

2. Tensile steel for composite slab construction that cuts

down on slab thickness and dead weight of buildings.

No separate form work required for slab casting.

MEZZANINE FLOORS

14

TM

TM

Structural Floor Decking sheets:

United Steel & Structurals Pvt. Ltd. offers complete technical support in

design and selection of your building type, roofing and wall cladding with all the

necessary accessories like ridge, flashing, crimp curve and gutters to suit your

requirements.

Available Finishes: 1. Normal CR 2. Galvanized 3. Pre painted galvanized

Technical Support:

Building with Steel:

When it comes to bigger, taller and longer span and

geometrically complex structures , steel buildings are the best

choice.

United Steel & Structurals Pvt. Ltd.™ specializes in

simplified, efficient steel building process, resulting in saving

valuable time and money.

The highly skilled professionals at United Steel & Structurals

Pvt. Ltd., with their customized approach and attention to

detail offer expert turnkey Steel building solutions which

blend design , strength and production cost intelligently.

State-of-art designing and drafting tools are used to generate

highly accurate designs which helps us in offering best design

options for your requirement. We understand that efficient

planning and speedy execution are the most critical factors in

the metal building industry. Hence completing the project on

time, within the estimated cost without compromising on

quality has always been our primary concern.

Send us your query and our team will immediately get in

touch with you to offer the best and cost effective option for

your requirement.

Applications:

Construction:

• High rise Buildings

• Heavy Manufacturing Industries

• Melting & Furnace Units

• Cement Factories

• Sugar Factories

• Fertilizer Plants

• Steel Mills

• Sea Ports

All the necessary hot rolled sections such as Joists, ISMB,

Channels, Angles, Tubes connected by Arc welding & Bolts and

Nuts are made out of structural steel are as per IS 2062 A&B.

15

TM

Heavy Industrial Steel Buildings:

USS HEAVY INDUSTRIAL STEEL BUILDINGS

TM

HEAVY INDUSTRIALSTEEL STRUCTURES

Top finish CoatingPrimer CoatingChromate CoatingAl Zn Coating

Al Zn CoatingChromate Coating

Bottom finish Coating

Base Metal

Materials:

1. PPGI 240 Mpa 0.47 - 0.50mm

2. Bare Galvalume 550 Mpa 0.47 mm

3. Colour Coated Galvalume 550 Mpa 0.47 - 0.5

Sl. Material YieldStrength

Total CoatedThickness No.

16

Roofing & Cladding sheets:

Pre-Painted Galvanized Steel (PPGI):

Substrate: : IS:513 Cold Rolled steel coils

Tensile Strength : 240 Mpa

Galvanizing : IS:277 / JIS:3302

Zinc Coating : Pure lead free zinc 120 GSM (Both Side mass)

Pre Painting : IS:14246 / JIS:3312

Type of Coating : RMP / SMP

Total coated Thickness : 0.47 mm - 0.50 mm

Tolerance : + or - 0.03 as per IS:513

Aluminium Zinc Alloy Coated Steel (GALVALUME):

Combination : 55% Aluminium, 43.4% Zinc & 1.6% Silicon

Coating Standard : As 1397 - 1993

Material : Bare Galvalume - ASTM A792M

Coating Mass : AZ 150

Base Metal : High Tensile Steel

Tensile Strength : 550 Mpa

Total Coated Thickness : 0.47mm - 0.50mm

Tolerance : +or- 0.04 as per AS / NZS 1397

Technical Specifications:

USS ROOFING & CLADDING SHEETS

TM

Accessories:

Color Chart:

Color Chart is an approximate display of RAL colors. Actual Colors may vary from those shown herein.

Refer to an original RAL Color Card for a precise color reproduction.

Off White RAL 9002

Mist Green RAL 6011 Caulifield Green RAL 6009 Taurus Blue RAL 5009

Sky Blue RAL 5012 Brick Red RAL 3003

VALLEY GUTTER

RIDGE PLAIN CORNER FLASHING GABLE FLASHING OPENING FLASHING

DRIP FLASHINGEND WALL FLASHINGINTERNAL CORNER FLASHING APRON

BOX GUTTER

17

USS ROOFING & CLADDING SHEETS

18

The company ‘s PEB Systems manufacturing unit is located at Madurantakam, Kanchipuram District, 67 Kms from Chennai Airport.

The unit is spread across 6 Acres with 100,000 Sq.ft shop floor facility and it is one the largest PEB Systems manufacturing unit in the

country. The factory is equipped with State-of-the-art machinery for fabrication by using high tensile steel plates, High-end

Automatic Roll Forming machine, Automatic Welding Line using SAW & MIG Welding technology as per AWS Standards. All the

components like Rigid Columns, Rafters, Cold Form Purlins & Metal Roofing/Cladding are made out of quality materials at our

manufacturing unit and transported to the site. The unit is capable of producing 2000 metric tons of Plate fabrication, 4000 metric

tons of Roofing sheets, 700 metric tons of Purlins & 600 metric tons of Decking Sheets per month. USS PEBs are designed,

fabricated, supplied and installed in a remarkably low time, thus saving precious time and money.

United Steel & Structurals Pvt. Ltd is capable of meeting any engineering challenges exclusively in Pre Engineered/Fabricated

Metal Buildings Industry with all kinds of complexity like multiple EOT Cranes, Mezzanine Floors and High Rise Steel Structures.

Manufacturing Unit: Spread across 6 acres with 100,000 Sq. ft Shop Floor facility with automated integration


19

TM


PROJECTS GALLERY

20

Grupo Antolin - Work in progress

Balu SOC, Tirupur

Pavan Doors, Erode

Punch Ratna fasteners Aruna Alloys Jayachandran Batteries

PCK Buderus PCK Buderus with Multi cranes

Vin Maxx Madras Cements

International Tubes, Tumkur Jasmine Towels, Madurai


PROJECTS GALLERY

TM

21

True Sai Works, Salem

Toyota Boshoku - Heavy Engineering Toyota Boshoku - Heavy Engineering Jayaram - Heavy Engineering

Indocool Anbu stores with Mezzanine

Jayalakshmi Sea FoodsJayajothi Vizhupuram Railway Station

RBBR RBBR SRF


Some of our Clients:

22


Automotive Industry :1. M/s. Toyoto Boshoku Automotive India,

Bengaluru 6000 Sqmt2. M/s. Punch Ratna Fasteners, Oragadam 1600 Sqmt3. M/s. Grupo Antolin Pune Pvt. Ltd.,

Irungattukkottai 2817Sqmt

Automobile Show Rooms / Service Shed :1. M/s. True Sai Works , Salem 2500 Sqmt2. M/s. Abidunissa, Gerugambakkam 1500 Sqmt3. M/s. Jayaraj Automobiles Agencies, Trichy 2136 Sqmt4. M/s. Rehoboth Motors, Tirunelveli 518 Sqmt5. M/s. Vinayaga Body Building Pvt. Ltd., Madurai 1000 Sqmt

Cold Storage Sheds :1. M/s. Himaja Alloys, Chittore, A.P. 3000 Sqmt2. M/s. Jayalakshmi Sea Foods, Vijayawada, A. P. 1500 Sqmt

Community Centres :1. M/s. Appollo Promoters, Poondi 1800 Sqmt2. Parthasarathy Temple, Chennai 500 Sqmt3. Jayam Goshala, Mayavaram 2000 Sqmt4. M/s. Indian Tobacco Association, Guntur, A.P 1000 Sqmt

Educational Institutions :1. M/s. BVM School, Kalpakkam 500 Sqmt2. M/s. Sai Ram Engineering College, Chennai 1000 Sqmt3. M/s. Empower Industrial Training Centre, Trichy 600 Sqmt4. M/s. Velammal Trust, Madurai 2241 Sqmt5. M/s. Velammal Vidhyashram Educational Trust,

Chennai 1447 Sqmt6. M/s. AKT Group of Institutions, Kallakurichi 1000 Sqmt

Hotel Industry :1. M/s. Hilton Hotel, Chennai 2000 Sqmt2. M/s. Ashok Groups, Chennai 1066 Sqmt

Logistics :1. M/s. Kailash Trade Links Private Limited, Chennai 727Sqmt2. M/s. Namakkal Transports & Carriers Pvt. Ltd.,

Irulapalayam 3000 Sqmt

Manufacturing Units :1. Mr. Vinayagamoorthy, Tirupur 1300Sqmt2. M/s. Aster Infratech, Chennai 3000 Sqmt3. M/s. Arjun Technologies, Chennai 800 Sqmt4. M/s. Ganesa Moorthy, Pudukottai 2500 Sqmt5. M/s. Kemin, Gummidipoondi, 1200 Sqmt6. M/s. Southern Plastics, Irungattukkottai 1600 Sqmt7. M/s. Shah Polymers, Chennai 1200 Sqmt8. M/s. Aruna Alloys, Madurai 1000 Sqmt9. M/s. Jayaram Engineering Works, Trichy 4700 Sqmt10. M/s. NKG Jayanti Coffee Works, Hassan, Karnataka 2000 Sqmt11. M/s. PCK Buderus , Pune 3000 Sqmt12. M/s. Brakes India Ltd, Nanjangud, Mysore 1500 Sqmt

13. M/s. RBBR Industries Ltd, Hosur 2500 Sqmt14. M/s. Baby Engineering, Trichy 3000 Sqmt15. M/s. Haberl Bulk Containers, Nanguneri 4200Sqmt16. M/s. Indocool Engineering, Ranipet 2500 Sqmt17. M/s. Manna Foods, Madurai (Brittania group) 9250 Sqmt18. M/s. TMH Steels Private Limited, Kayatharu 3000Sqmt19. M/s. Jayachandran Group of Co., Coimbatore 3400Sqmt20. M/s. International Tube Mills, Tumkur, Karnataka 2200 Sqmt21. M/s. Madras Cements, Valappadi, Salem 1500Sqmt22. M/s. Sree Alloys, Coimbatore 750Sqmt23. M/s. United Spirits, Bhopal (UB Group) 2700 Sqmt24. M/s. Ideal Cookware, Tirunelveli

(Ideal Pressure Cookers) 1000 Sqmt25. Vinayaga Body Building Pvt., Ltd., Madurai 1000 Sqmt26. Jai Hind Wire Rods Rolling Pvt. Ltd., Salem 1560 Sqmt27. M/s. Baby Engineering, Trichy 4700 Sqmt28. M/s. Vin Maxx, Sriperumpudur 1742 Sqmt29. M/s. Pioneer Distilleries Limited, Maharashtra

(UB Group) 6750 Sqmt30. M/s. Buhin Engineers (P) Ltd., Oragadam 558 Sqmt31. M/s. Macho Engineering Industries, Bengaluru 1500 Sqmt32. M/s. Bharat Heavy Electrical Ltd.,

Boiler Auxiliaries Plant, Ranipet 1125 Sqmt

Railway Sheds :1. M/s. ICF, Chennai 8000 Sqmt2. M/s. Lendi Associates, Chennai 3000 Sqmt3. M/s. Vee Yam Engineering, Chennai 1500 Sqmt

Textile Industry :1. M/s. Balu SOC, Tirupur 3000 Sqmt2. M/s. B.J. Expo, Avadi, Chennai 1200 Sqmt3. M/s. Jasmine Towels, Madurai 5000Sqmt4. M/s. Linen Park Spa Pvt. Ltd., Bidadi 1630 Sqmt

Ware Houses :1. M/s. Raja Crops Pvt. Ltd., Pudukkottai 2500 Sqmt2. M/s. Anbu Stores, Thiruvallur 2000 Sqmt3. M/s. JSA Shippers & Forwarders, Uthiramerur 1500 Sqmt4. M/s. Sattva Constructions, Ponneri 3125 Sqmt5. M/s. Southern Enterprises, Tuticorrin 3600 Sqmt6. M/s. G.P. Associates, Tirunelveli 1000 Sqmt7. M/s. Pavan Doors & Windows

(Godrej Agrovet Ltd.) Erode 4200 Sqmt8. M/s. Sesha Sayee Paper Boards, Tirunelveli 2200 Sqmt9. M/s. David & Associates, Tuticorin 944 Sqmt10. M/s. India Cements Ltd, Sankar Nagar, Tirunelveli 723 Sqmt11. M/s. Sri Sivaram Builders, Tuticorin 930 Sqmt12. M/s. India Cements Ltd, Thalavai 2600 Sqmt13. M/s. L&T Ship Building Ltd., Ennore, Chennai 629 Sqmt14. M/s. Repute Infotech & Enterprises Ltd.,

Sriperumpudur 1700 Sqmt

TM

‘ Building Trust Together’

The best inspiration comes to us from our clients. Their requirements are special and varied based on building types and

applications. Designing for them has always been a challenge to us. A Warehouse, a commercial complex, a factory shed, a cold

storage, an institution, a shopping mall, a car park, walkway, mezzanine floor, a place of worship... the list is pretty long.

Our customers are immensely satisfied with the design solutions and attention to engineering details offered by the highly

competent team of structural designers and project engineers for the various specifications determined by them for their

applications.

By accomplishing the projects for our clients to their utmost satisfaction, we are proud to find that we have actually built

relationships more than buildings.

We promise to continuously work towards enhancing the service of ’ building trust together’.

23


SG

S/U

SS

/00

9/1

2

TM

™

UNITED STEEL & STRUCTURALS PVT. LTD.

Corporate Office: No.8 (Old No.23), Venus Colony II Street, Alwarpet, Chennai 600 018Tel: +91 44 4232 1801, 4308 1098 Fax: +91 44 4308 1142

Manufacturing Unit: SF. No.124A/2 & 3, Sirunallur Village, Polambakkam P.O, Madurantakam Tk, Kancheepuram Dist. Pin - 603 309. Tamilnadu, India

Regional Business Representations across India:• Andhra Pradesh • Chattisgarh • Gujarat • Jharkhand • Karnataka • Madhyapradesh • Maharashtra • Odisha • Rajasthan • Tamil Nadu • Uttaranchal • Uttar Pradesh

E-mail: [email protected]

Website: www.unitedstructurals.com

USS PEB SYSTEMS MANUFACTURING UNIT: Spread across 6 acres.

100,000 Sq. ft Shop Floor facility with automated integration

tm - united steel structurals (p) ltd

Documents