ALLIMEXGreen Power

A Module re-ModuledBlade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

Higher Yield Due to Better Shading Response Blade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array’s current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less. By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

Less Mismatch Loss Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatch happened between cells caused by shadow, out of sync performance degradation, ect.

Less Internal Power Loss The ribbon length of half-cell is shorter than normal cell. Calculated by Joule’s law and Ohm’ law, the power loss reduction is nearly 6%.

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割

102342-310W mono FB HC

Key features

Benefits

Warranty

Insurance

Certificates

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割

More Output

Higher Efficiency

Higher ROI

Guarantee on product material

and workmanship

Linear power output warranty

15YEARS

25YEARS

Module current output is 8.7A, current mismatch in series is 0.3A.

Design Sketch Circuit Diagram

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Electrical Mismatch

Design Sketch Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35 A

Electrical Mismatch

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割

Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output.

In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused.

Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatchhappened between cells caused by shadow, out of sync performance degradation, ect.

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Blade™ – A Module re-Modeled

Less Mismatch Loss

More Output Higher ROIHigher Efficiency

With 6 internal strings of cells

With 2 x 6 internal strings of cells

Module current output is 8.7A, current mismatch in series is 0.3A.

Module current output is 4.5+4.35=8.85A, current mismatch in series is 0.15A.

Blade™

Standard Module

Design Sketch

Design Sketch

Circuit Diagram

Circuit Diagram

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.5A

4.5A 4.5A 4.5A 4.5A 4.5A 4.35A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 9A

9A 9A 9A 9A 9A 8.7A

Cuts Night, Breaks Dawn.

TM

Cuts Night, Breaks Dawn.

TM

Electrical Mismatch

Electrical Mismatch

Less Internal Power Loss

By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

The ribbon length of half-cell is shorter than normal cell. Calculated by Joule's law and Ohm' law, the power loss reduction is nearly 6%.

Standard Cell Half Cell

Higher Yield Due to Better Shading ResponseBlade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less.

Blade Module Standard Module TM

Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS

25YEARS

Gua

rant

eed

Pow

er

100%97.5% 97.5%

94.7%

91.2%

87.7%

84.2%

80.7%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

Insurance

Product Certificates

切割G

uara

ntee

d P

ower

100%

97% 97%

94.28%

90.88%

87.48%

84.08%

80.68%

90%

80%

0 5 10 15 20 25Years

Addtional Value from Linear Warranty

ALLIMEXGreen Power

102342-310W mono FB HC

Mechanical Specifications

Electrical Characteristics

Temperature Characteristics

Packing Configuration

Pieces per Pallet

Pallets per Container

Pieces per Container

Container 20’GP 40’GP

12

360

26

780

External Dimensions

Weight

Solar Cells

Front Glass

Frame

Junction Box

Output Cables

Connector

Mechanical Load

1674 x 992 x35 mm

18.5 kg

PERC Mono crystalline 156.75 x 78.375mm (120pcs)

3.2 mm AR coating tempered glass, low iron

Anodized aluminium alloy

IP68， 3 diodes

4.0 mm²,Portrait:255mm(+)/355mm(-)；Landscape:1200mm

MC4 Compatible

5400 Pa

-0.38 %/°C

-0.28 %/°C

+0.05 %/°C

-40～+85 °C

45±2 °C

I-V Curve

3030

info@seraphim-energy.comwww.seraphim-energy.com

Add: No.1-2, HengyaoRd, HenglinTown, Wujin District, 213000, Changzhou, China Tel: +86-519-69699879 Fax: +86-519-88786181 Email: info@seraphim-energy.com

TM

Cuts Night, Breaks Dawn.

305W-320W

Cuts Night, Breaks Dawn.

TM

1674 x 992 x 35 mm

STC: lrradiance 1000 W/m² module temperature 25°C AM=1.5;

(0,+4.99)

1000 VDC / 1500 VDC

20A

SRP-315-BMB SRP-315-BMB-HV

STC

315

40.1

9.85

33.7

9.35

18.97

Maximum Power at STC (Pmp)

Open Circuit Voltage (Voc)

Short Circuit Current (Isc)

Maximum Power Voltage (Vmp)

Maximum Power Current (Imp)

Module Efficiency at STC(ηm)

Power Tolerance

Maximum System Voltage

Maximum Series Fuse Rating

Module Type

-HV

SRP-XXX-BMB: Maximum System Voltage1000 VDC

SRP-XXX-BMB-HV: Maximum System Voltage1500 VDC

SRP-310-BMB SRP-310-BMB-HV

STC

310

39.8

9.77

33.5

9.26

18.67

SRP-320-BMBSRP-320-BMB-HV

STC

320

40.4

9.93

34.0

9.42

19.27

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

12

Cur

rent

[A]

Incident Irrad. = 1000 W/m²Cells temp. = 10 °CCells temp. = 25 °CCells temp. = 40 °CCells temp. = 55 °CCells temp. = 70 °C

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

12

Cur

rent

[A]

Incident Irrad. = 1000 W/m²

Cells temp. = 25 °C

Incident Irrad. = 800 W/m²

Incident Irrad. = 600 W/m²

Incident Irrad. = 400 W/m²

Incident Irrad. = 200 W/m²

A A

Grounding holes2×Ø

I

10±1

35±1

Section A-A

70 70

7070

I

9

14

R4.

5

5:1I I

2:110:1

SERIA L NUMBER

Label

SERIALNUMBER

Mounting holes

35

35

200±

5

200±5

positive ( + )negative ( - ) Junction Box

1674

±113

94±1

894±

1

992±1

1674

±1

992±1

942±1

J uncti on B oxJ uncti on B ox J uncti on B oxJ uncti on B ox J uncti on B oxJ uncti on B ox

SERIA L NUMBER

40’HQ

26

832

30+2*

* 30+2 pieces per pallet is the special package which only suits for container transport. For details,please consult SERAPHIM.

Mechanical Specifications

Electrical Characteristics

Temperature Characteristics

Packing Configuration

Pieces per Pallet

Pallets per Container

Pieces per Container

Container 20’GP 40’GP

12

360

26

780

External Dimensions

Weight

Solar Cells

Front Glass

Frame

Junction Box

Output Cables

Connector

Mechanical Load

1674 x 992 x35 mm

18.5 kg

PERC Mono crystalline 156.75 x 78.375mm (120pcs)

3.2 mm AR coating tempered glass, low iron

Anodized aluminium alloy

IP68， 3 diodes

4.0 mm²,Portrait:255mm(+)/355mm(-)；Landscape:1200mm

MC4 Compatible

5400 Pa

-0.38 %/°C

-0.28 %/°C

+0.05 %/°C

-40～+85 °C

45±2 °C

I-V Curve

3030

info@seraphim-energy.comwww.seraphim-energy.com

Add: No.1-2, HengyaoRd, HenglinTown, Wujin District, 213000, Changzhou, China Tel: +86-519-69699879 Fax: +86-519-88786181 Email: info@seraphim-energy.com

TM

Cuts Night, Breaks Dawn.

305W-320W

Cuts Night, Breaks Dawn.

TM

1674 x 992 x 35 mm

STC: lrradiance 1000 W/m² module temperature 25°C AM=1.5;

(0,+4.99)

1000 VDC / 1500 VDC

20A

SRP-315-BMB SRP-315-BMB-HV

STC

315

40.1

9.85

33.7

9.35

18.97

Maximum Power at STC (Pmp)

Open Circuit Voltage (Voc)

Short Circuit Current (Isc)

Maximum Power Voltage (Vmp)

Maximum Power Current (Imp)

Module Efficiency at STC(ηm)

Power Tolerance

Maximum System Voltage

Maximum Series Fuse Rating

Module Type

-HV

SRP-XXX-BMB: Maximum System Voltage1000 VDC

SRP-XXX-BMB-HV: Maximum System Voltage1500 VDC

SRP-310-BMB SRP-310-BMB-HV

STC

310

39.8

9.77

33.5

9.26

18.67

SRP-320-BMBSRP-320-BMB-HV

STC

320

40.4

9.93

34.0

9.42

19.27

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

12

Cur

rent

[A]

Incident Irrad. = 1000 W/m²Cells temp. = 10 °CCells temp. = 25 °CCells temp. = 40 °CCells temp. = 55 °CCells temp. = 70 °C

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

12

Cur

rent

[A]

Incident Irrad. = 1000 W/m²

Cells temp. = 25 °C

Incident Irrad. = 800 W/m²

Incident Irrad. = 600 W/m²

Incident Irrad. = 400 W/m²

Incident Irrad. = 200 W/m²

A A

Grounding holes2×Ø

I

10±1

35±1

Section A-A

70 70

7070

I

9

14

R4.

5

5:1I I

2:110:1

SERIA L NUMBER

Label

SERIALNUMBER

Mounting holes

35

35

200±

5

200±5

positive ( + )negative ( - ) Junction Box

1674

±113

94±1

894±

1

992±1

1674

±1

992±1

942±1

J uncti on B oxJ uncti on B ox J uncti on B oxJ uncti on B ox J uncti on B oxJ uncti on B ox

SERIA L NUMBER

40’HQ

26

832

30+2*

* 30+2 pieces per pallet is the special package which only suits for container transport. For details,please consult SERAPHIM.

Mijnwerkerslaan 33/3, B-3550 Heusden-Zolder | +32 (0)11 72 96 50info@allimex-greenpower.eu | www.allimex-greenpower.eu

info@seraphim-energy.com www.seraphim-energy.com

BEHIND THE ECLIPSEWe challenged ourselves to push the boundaries of PV technology and pioneer new innovations in solar module design. The design of the Eclipse module takes into consideration every element that defines a perfect solar module. The culmination of our efforts is a module that is superior in performance, reliability, safety, and value.

Eclipse Module

325W-340W

Eclipse SRP-E01B(-HV)Eclipse SRP-E01B(-HV)

SRP-DS-EN-2019V2.0 ｜ © Copyright 2019 Seraphim

Mechanical Specifications

Temperature Characteristics

Packing Configuration

Pieces per Pallet

Pallets per Container

Pieces per Container

Container

External Dimensions

Weight

Solar Cells

Front Glass

Frame

Junction Box

Output Cables

Connector

Mechanical Load

-0.37 %/°C

-0.28 %/°C

+0.05 %/°C

-40～+85 °C

45±2 °C

I-V Curve

28

840

30

1048±1

1623

±1

Grounding holes2×Ø4

Mounting holes

A A

10±1

1623

±1

843±

1

1048±1

35±1

1343

±1 posi

tive

( + )

nega

tive

( - )

Con

nect

or

1000±1

I

II

Junction Box

SE

RIA

L N

UM

BE

R

SE

RIA

L N

UM

BE

R

998±1

Label

SER

IAL

NU

MBE

R

SER

IAL

NU

MBE

R

I

9

14

R4.5

5:1

70 70

7070

II2:1 Section A-A

10:1

35

35

The Eclipse module takes advantage of Seraphim’s innovative module technology, using traditional solar cells to increase efficiency and reliability while reducing BOS cost. The Eclipse module bridges the gap between functionality and design, providing an elegant solution to all your solar energy needs.

Significantly Reduced Hot-Spot Effect

10% Reduction in BOS and Installation Cost

Installation

+System BOS

15% Greater Return on Projects

Reliable Connection

Low Resistance

Warranty

Gua

rant

eed

Pow

er

Addtional Value from Linear Warranty

linear power output warranty

Guarantee on productmaterial and workmanship10

YEARS25YEARS

+15%

More Benefits

Certifications

Insurances

Temperature after shading test (at 5hrs, in °C)Maximum Temp

Average Temp

Minimum Temp

47.3°C

23.9°C

15.6°C

Improved Reliability and Durability

Better performance under shade

Beautifully designed

5400Pa Mechanical Load

100%97% 97%

94.28%

90.88%

87.48%

84.08%

80.68%

90%

80%

0 5 10 15 20 25year

1623 x 1048 x 35 mm

18.5 kg

PERC Mono crystalline

3.2 mm AR coating tempered glass, low iron

Anodized aluminium alloy

IP68

4.0 mm²,cable length: 1000 mm

MC4 Compatible

5400 Pa

1623 x 1048 x 35 mm

40’HQ

Electrical Characteristics

Maximum Power (Pmp)

Open Circuit Voltage (Voc)

Short Circuit Current (Isc)

Maximum Power Voltage (Vmp)

Maximum Power Current (Imp)

Module Efficiency at STC(ηm)

Power Tolerance

Maximum System Voltage

Maximum Series Fuse Rating

SRP-325-E01BSRP-325-E01B-HV

SRP-330-E01BSRP-330-E01B-HV

SRP-335-E01BSRP-335-E01B-HV

(0,+4.99)

1000 VDC / 1500 VDC

20A

STC

330

44.90

9.40

36.80

8.97

NOCT

245

41.60

7.59

34.20

7.17

STC

335

45.15

9.49

37.05

9.05

NOCT

248

41.70

7.65

34.30

7.24

STC

325

44.70

9.31

36.60

8.88

NOCT

241

41.40

7.52

34.00

7.09

19.11

SRP-340-E01BSRP-340-E01B-HV

STC

340

45.35

9.58

37.30

9.12

NOCT

252

41.90

7.73

34.50

7.31

19.9919.40 19.70

STC: lrradiance 1000 W/m2 module temperature 25°C AM=1.5,Power measurement tolerance: +/-3%;NOCT: lrradiance 800 W/m2 ambient temperature 20°C wind speed :1m/s Power measurement tolerance: +/-3%

SRP-XXX-E01B-HV: Maximum System Voltage1500 VDCSRP-XXX-E01B: Maximum System Voltage1000 VDC

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

12

Cur

rent

[A]

Incident Irrad. = 1000 W/m²

Cells temp. = 25 °C

Incident Irrad. = 800 W/m²

Incident Irrad. = 600 W/m²

Incident Irrad. = 400 W/m²

Incident Irrad. = 200 W/m²

0 10 20 30 40 50Voltage [V]

0

2

4

6

8

10

Cur

rent

[A]

Incident Irrad. = 1000 W/m²Cells temp. = 10 °CCells temp. = 25 °CCells temp. = 40 °CCells temp. = 55 °CCells temp. = 70 °C