Animal Cell Culture

Submitted by :-

Mr. Sunil Saini

M.Pharm 1st sem.

Supervised by :-Dr. Anil PareekAssistant Professor,Pharmaceutics.

2

What is tissue culture?

• In vitro culture (maintain and/or proliferate) of cells, tissues or organs

• Types of tissue culture• Organ culture• Tissue culture• Cell culture

3

Organ culture

• The entire embryos or organs are excised from the body and culture

• Advantages• Normal physiological functions are maintained. • Cells remain fully differentiated.

• Disadvantages• Scale-up is not recommended. • Growth is slow. • Fresh explantation is required for every experiment.

4

Tissue Culture

• Fragments of excised tissue are grown in culture media

• Advantages • Some normal functions may be maintained.

• Better than organ culture for scale-up but not ideal.

• Disadvantages• Original organization of tissue is lost.

5

Cell Culture

• Tissue from an explant is dispersed, mostly enzymatically, into a cell suspension which may then be cultured as a monolayer or suspension culture.

• Advantages• Development of a cell line over several generations

• Scale-up is possible

• Disadvantages• Cells may lose some differentiated characteristics.

6

7

Why do we need Cell culture?

• Research• To overcome problems in studying cellular behavior

such as:• confounding effects of the surrounding tissues

• variations that might arise in animals under experimental stress

• Reduce animal use

• Commercial or large-scale production• Production of cell material: vaccine, antibody, hormone

8

Advantages of Cell culture

• Advantages:• Absolute control of physical environment • Homogeneity of sample • Less compound needed than in animal models

• Disadvantages:• Hard to maintain • Only grow small amount of tissue at high cost • Dedifferentiation • Instability, aneuploidy

9

Types of Cell culture

1. Primary Cultures• Derived directly from excised tissue and cultured either as

• Outgrowth of excised tissue in culture • Dissociation into single cells (by enzymatic digestion or

mechanical dispersion)

• Advantages:• usually retain many of the differentiated characteristics of the cell

in vivo

• Disadvantages:• initially heterogeneous but later become dominated by fibroblasts. • the preparation of primary cultures is labor intensive• can be maintained in vitro only for a limited period of time.

10

Types of Cell culture

2. Continuous Cultures• derived from subculture (or passage, or transfer) of

primary culture • Subculture = the process of dispersion and re-culture the cells

after they have increased to occupy all of the available substrate in the culture

• usually comprised of a single cell type

• can be serially propagated in culture for several passages

• There are two types of continuous cultures• Cell lines

• Continuous cell lines

11

Types of continuous culture

1) Cell lines • finite life, senesce after approximately thirty

cycles of division

• usually diploid and maintain some degree of differentiation.

• it is essential to establish a system of Master and Working banks in order to maintain such lines for long periods

12

Types of continuous culture

2) Continuous cell lines• can be propagated indefinitely

• generally have this ability because they have been transformed • tumor cells.

• viral oncogenes

• chemical treatments.

• the disadvantage of having retained very little of the original in vivo characteristics

13

Initiation of culture

Tissue

Primary cell culture

Cell line Continuous cell line

dispersion

Subculture

Finite numbersIndefinite numbers

Stored Stored

14

Cell Culture Morphology

• Morphologically cell cultures take one of two forms:• growing in suspension (as single cells or small free-floating clumps)

• cell lines derived from blood (leukaemia, lymphoma)• growing as a monolayer that is attached to the tissue culture flask.

• cells derived from solid tissue (lungs, kidney), endothelial, epithelial, neuronal, fibroblasts

Hela-Epithelial

MRC5-Fibroblast SHSY5Y-Neuronal

BAE1-Endothelial

15

Special types of Cell culture

Cells in the culture can be grown to adopt in vivo characteristic

• Histotypic culture• Single cell lineage

• Organotypic culture• Multiple cell lineages

16

Biology of Culture cells

• Cell growth and differentiation in the culture depends on:

• The nature of cells

• The culture environment• the nature of the substrate on which cell grow

• the physicochemical and physiological constitution of culture medium

• the constitution of gas phase

• the incubation temperature

• the cell-cell and cell-matrix interaction

17

Cell cycle

MMitosis

G1Gap1

G2Gap2

G0

SSynthesis

G1 check point• cell big• environment suitable

G2 check point• DNA replicated• cell big• environment suitable

Metaphase check point• chromosome align on spindle

18

Cell cycle

• Interphase: • generally lasts at least 12 to 24 hours in mammalian tissue• the cell is constantly synthesizing RNA, producing protein and

growing in size• Gap 0 (G0): cell will leave the cycle and quit dividing temporary or more

permanent • Gap 1 (G1): Cells increase in size, RNA and protein synthesis, there is a

G1 Checkpoint• S Phase: The DNA replication occurs• Gap 2 (G2): The cell will continue to grow and produce new proteins.

There is a G2 Checkpoint •  Mitosis or M Phase:

• Cell growth and protein production stop • the cell cycle divides into two similar daughter cell• Mitosis last perhaps only one to two hours• there is a Checkpoint in the middle of mitosis (Metaphase

Checkpoint) that ensures the cell is ready to complete cell division.

19

Factors affecting cell proliferation

• Promotion of cell proliferation• low cell density (leaves the cell with free

edge)• signals from environment: Growth factors

• Inhibition of cell proliferation• Density limitation: high cell density• Contact inhibition: cell contact

20

Factors affecting cell diferentiation

• Cell differentiation is important for normal cell functions

• Factors promoting cell differentiations• high cell density

• cell-cell and cell-matrix interaction

• inducers: hydrocortisone, retinoid, matrix

21

Factors affecting cell adhesion

• Cell adhesion is important for cell proliferation and differentiation (signaling through cytoskeleton)

• Cell adhesion molecule• Cell-cell interaction: CAMs, cadherins• Cell-matrix interaction: integrin,

transmembrame proteoglycan

• Tight junctional complex in epithelial cells for cell-cell interaction

22

Factors affecting cell adhesion

• Enzymatic disaggregation digests the adhesion molecule and extracellular matrix

• Most cells from solid tissues grow as adherent monolayer

• Matrix-coated surface promotes cell proliferation and differentiation

23

Factors affect cell culture success

• Appropriate cells• Suitable environment

• Solid phase• substrate or phase on which the cell grow eg. glass, plastic,

collagen, agar

• Liquid phase• physicochemical and physiological constitution of the medium

• Gaseous phase• Temperature• Aseptic environment

24

Solid phase

• Anchorage dependent cells require a nontoxic, biologically inert to attach and allow movement for growth

• The most convenient vessels are polystyrene plastic

• other growth surface such as glass, filter wells

• The surface can be treated by• coated with matrix substrate eg. Collagen,

poly-l-lysine, matrigel• Feeder layers: monolayer of supporting

cells, perhaps promote cell growth and differentiation by cell contact and substance secreted

25

Liquid phase

• Components of culture media• Inorganic Salts

• retain the osmotic balance of the cells

• regulate membrane potential by provision of sodium, potassium and calcium ions.

• are required in the cell matrix for cell attachment and as enzyme cofactors.

• Carbohydrates

• Most media contain 4-20 mM glucose

• main source of energy from glycolysis

26

Liquid phase

• Proteins and Peptides

• are used to replace those normally present in serum eg. transferrin, fibronectin

• Amino acids

• important for cell proliferation and differentiation

• glutamine can enter Kreb’s cycle• Fatty Acids and Lipids

• important in serum free media e.g. cholesterol and steroids essential for specialized cells.

27

Liquid phase

• Vitamins• vitamins B are necessary for cell growth and

proliferation• precursors for numerous co-factors• The vitamins commonly used in media include

thiamine, riboflavin and biotin• Trace Elements

• zinc, copper, selenium and tricarboxylic acid intermediates.

• Selenium is a detoxifier and helps remove oxygen free radicals.

28

Liquid phase

• Buffering Systems

• most cells need optimal pH conditions in the range 7.2 - 7.4

• close control of pH is essential for optimum culture conditions

• bicarbonate/CO2 buffering systems• Chemical buffering: HEPES

• Most commercial culture media include phenol red as a pH indicator

• yellow (acid) or purple (alkali)• Osmolarity

• similar to plasma osmolarity 290 mOsm

29

Liquid phase

• Serum• Undefined factors: complex mix of albumins,

growth factors and growth inhibitors • increase the buffering capacity of cultures• able to bind and neutralize toxins• can be important for slow growing cells or where

the seeding density is low• Subject to batch to batch variation• Heat inactivation of serum (incubation at 56ºC for

30 minutes) can help to reduce the risk of contamination

30

Gaseous phase

• Carbondioxide• important for buffering system

• 5-10% CO2

• Endogenous production: pyruvate

• Oxygen• most cells in culture require low oxygen tension

• anaerobic glycolysis

• high oxygen can produce toxic free radical

H 3 C C C O

O O

C S

O

H 3 C Co A

HSCo A

N A D + N A D H

+ C O 2

P y r u v a t e D e h y d r o g e n a s e

p y r u v a t e a c e t y l - C o A

31

Temperature

• The optimum temperature depends on• the body temperature of animals from which the

cells were obtained

• anatomical variation of temperature (skin temperature may be lower than the rest of the body)

32

Aseptic techniques

• Microorganism remains a major problem in cell culture

• prevention of contamination• Antibiotics

• improvement of laboratory condition

• Aseptic techniques

• Clean and tidy work surface

• Personal hygiene• hand washing

• caps, gowns, face mask

• Reagents and media

• Culture vessels

33

Cryopreservation of Cell Lines

• The aim of cryopreservation is to enable stocks of cells to be stored to prevent the need to have all cell lines in culture at all times

• Reduced risk of microbial contamination • Reduced risk of cross contamination with other cell

lines • Reduced risk of genetic drift and morphological

changes • Work conducted using cells at a consistent passage

number• Reduced costs (consumables and staff time)

Cryopreservation of Cell Lines

Method Advantages Disadvantages

Electric (-135ºC) Freezer Ease of maintenance Steady temperature Low running costs

Requires liquid nitrogen back-up

Mechanically complex Storage temperatures high

relative to liquid nitrogen

Liquid Phase Nitrogen Steady ultra-low (-196ºC)

temperature Simplicity and mechanical

reliability

Requires regular supply of liquid nitrogen

High running costs Risk of cross-contamination

via the liquid nitrogen - 196ºC

Vapor Phase Nitrogen

No risk of cross-contamination from liquid nitrogen

Low temperatures achieved Simplicity and reliability

Requires regular supply of liquid nitrogen

High running costs Temperature fluctuations

between - 135ºC and - 190ºC

35

Safety aspects of cell culture

• SAFETY CONSIDERATIONS• Assume all cultures are hazardous since they may harbor latent viruses

or other organisms• The following safety precautions should also be observed:

• pipetting: use pipette aids to prevent ingestion • keep aerosols down to a minimum • no eating, drinking, or smoking • wash hands after handling cultures and before leaving the lab • decontaminate work surfaces with disinfectant (before and after) • autoclave all waste • use biological safety cabinet (laminar flow hood) • use aseptic technique • dispose of all liquid waste after each experiment and treat with bleach

36

Biosafety cabinets

• The Class I BSC provides personnel and environmental protection, but no product protection.

• The Class I BSC is hard-ducted to the building exhaust system, thimble-connected, or recirculated back into the room depending on use.

• The Class II (Types A, B1, B2, and B3)24 biological safety cabinets provide personnel, environmental and product protection.

Laminar flow

37

Recommended Biosafety Levels for Infectious Agents BSL Agents Practices

Safety Equipment(Primary Barriers)

Facilities (Secondary Barriers)

1 Not known to consistently cause disease in healthy adults

Standard Microbiological Practices

None required Open bench top sink required

2 Associated with human disease, hazard = percutaneous injury, ingestion, mucous membrane exposure

BSL-1 practice plus:• Limited access • Biohazard warning signs• "Sharps" precautions • Biosafety manual defining any needed waste decontamination or medical surveillance policies

Primary barriers = Class I or II BSCs or other physical containment devices used for all manipulations of agents that cause splashes or aerosols of infectious materials; PPEs: laboratory coats; gloves; face protection as needed

BSL-1 plus: Autoclave available

3 Indigenous or exotic agents with potential for aerosol transmission; disease may have serious or lethal consequences

BSL-2 practice plus:• Controlled access• Decontamination of all waste• Decontamination of lab clothing before laundering• Baseline serum

Primary barriers = Class I or II BCSs or other physical containment devices used for all open manipulations of agents; PPEs: protective lab clothing; gloves; respiratory protection as needed

BSL-2 plus:• Physical separation from access corridors• Self-closing, double-door access• Exhausted air not recirculated• Negative airflow into laboratory

4 Dangerous/exotic agents which pose high risk of life-threatening disease, aerosol-transmitted lab infections; or related agents with unknown risk of transmission

BSL-3 practices plus:• Clothing change before entering• Shower on exit• All material decontaminated on exit from facility

Primary barriers = All procedures conducted in Class III BSCs or Class I or II BSCs in combination with full-body, air-supplied, positive pressure personnel suit

BSL-3 plus:• Separate building or isolated zone• Dedicated supply and exhaust, vacuum, and decon systems• Other requirements outlined in the text

38

References

• R. Ian Freshney. Culture of Animal cells a manual of basic technique. 4th edition. Wiley-Liss, New York. 2000.

• en.Wikipedia.com/animal_cell_culture.

39

Tissue culture area

40