tillage - assets.greatplainsmfg.com
TRANSCRIPT
www.GreatPlainsAg.com
SEEDBED PREPARATIONTILLAGE
Great Plains Turbo-Max®
Yield-Pro® Planters Vertical Tillage Conventional Tillage HD DrillsPlanting Components
Great PlainsProduct Lines
SEEDBED PREPARATIONEvery farming operation has
different and diverse tillage
needs. Great Plains offers a
complete line of products to
meet those needs whether it
is conventional tillage, vertical
tillage, or some combination
of both. You can depend on
Great Plains to deliver a quality
product that is field proven and
has the reputation of being at
the “top of its class.”
NUTRIENT APPLICATIONFor maximum plant benefit,
precise placement of High
Value Nutrients is a must. By
applying nutrients at the right
time, you can virtually eliminate
leaching and denitrification.
The Great Plains Nutri-Pro® and
Sprayer lines are the perfect
solution to help you increase
utilization while reducing costs.
SEED PLACEMENTTo maximize yield, three things
must be done well: seed
spacing, seed depth, and
seed-to-soil contact without
sidewall compaction. Great
Plains Drills and Planters are
designed and built using these
principles. Again, no matter
what your farming practices,
we have the right seeding
configuration to achieve a
uniform stand in a variety of
crops. We are the seed place-
ment specialists!
No-Till DrillsMin-Till Drills SprayersAir Drills Compact Drills Fertilizer Applicators
04 NEW PRODUCTS
06 TILLAGE SPECS
08 VERTICAL TILLAGE TOOLS
10 TURBO-MAX®
12 TURBO-TILL®
14 TURBO-CHOPPER®
16 ULTRA-TILL®
18 SUB-SOILER
20 TURBO-CHISEL®
22 CONVENTIONAL TILLAGE TOOLS
24 DISC-O-VATOR®
26 DISK HARROW
28 FIELD CULTIVATOR
30 LISTER CULTIVATOR
32 SEEDBED CONDITIONER
34 PLAINS PLOW
36 FLEX HARROW
38 COMPANY INFO
GREAT PLAINS PRODUCT APPLICATION GUIDENote: This guide is not a recommendation. It should only be used as a reference for the customer when trying to narrrow the scope on which product may work best for his or her operation.
PRODUCT& APPLICATION
Vertical Tillage
Conventional Tillage
Working Depth
Primary Tillage
Secondary Tillage
Seedbed Preparation
Heavy-Standing Residue*
Light-Stand-ing Residue**
Remaining Residue***
Suggested Speeds (m.p.h.) Productivity H.P. Requirement/
ft. of widthFuel
Requirement
SUB-SOILER x 12-16" x 4-5 Low 50/shank High
TURBO-TILL x 1-4" x x x 8-10 High 8-10 Medium
TURBO-MAX x 1-4" x x x 6-10 High 10-14 Medium
TURBO-CHOPPER x 1-4" x x x 8-10 High 8-10 Medium
ULTRA-TILL x 1-4" x x 8-10 High 5-7 Low
TURBO-CHISEL x 8-12" x 5-6 Medium 30/shank High
DISK HARROW x 2-6" x x 4-6 Medium 7-9 Medium
FIELD CULTIVATOR x 1-4" x x 5-8 High 5-7 Low
DISC-O-VATOR x 1-4" x x 7 High 5-7 Low
PLAINS PLOW x 2-4" x x 5-8 High 9 Medium
FLEX HARROW x x x 8-15 High 3-5 Low
SEEDBED CONDITIONER x x N/A High N/A Low
SHORT-DISK x 3-7" x x 6-8 High 12-15 Medium
ULTRA-CHISEL x 4-8" x 5-6 Medium 10-14/shank Medium
*Refers to untouched dry crop residue post harvest. For example, dry harvested corn stalks.**Refers to untouched dry crop residue post harvest. For example, dry harvested soybean residue.***Refers to approximate remaining (unburied) residue after making one pass with the tillage tool.
Excellent >75% This reference guide is based on soils that are tilled at ideal moistures. Specifications subject to change without notice.
Good 35%-75%
Poor <35%
CONTENTS
Features &Benefits
6321UC6324UC6327UC6329UC6330UC6333UC
MO
DEL
SROCKING BOLSTER - Patent-pending rocking bolster-type center frame keeps all center frame wheels on the ground, all the time, regardless of terrain.
WALKING TANDEMS - Cutting-edge materials and state-of-the-art seals allow this pivot to be maintenance-free.
HEAVY-DUTY SPRING TINE HARROW - Three-position adjustable heavy-duty spring tines allow the operator choices in tine angle. Longer tines increase trash flow.
FLOATING HITCH - Allows implement to negotiate undulations independently of the tractor for bet-ter ground gauging and depth control.
Ultra-Chisel™
The Great Plains Ultra-Chisel™ brings a new definition to the “chisel plow”. Its unique floating hitch design provides maximum ground-following capabilities to ensure constant working depth in the most adverse conditions. Combine this with 900 lb. trip force shanks and the producer has unmatched soil-fracturing potential to a working depth of 8". The Ultra-Chisel, available in widths from 21' to 33', will bring even the largest fields down-to-size in a short amount of time.
In today’s environment, soil and residue management are vital to maximizing yields. The Ultra-Chisel provides producers with a unique tool to fracture the soil above 8" to remove density layers while leaving the residue mixed at the surface to reduce wind erosion and assist with water infiltration. Ultra-Chisel has all of the features and benefits to truly redefine “chisel plow”.
MODEL INFO Ultra-Chisel™
Models: 6321UC 6324UC 6327UC 6329UC 6330UC 6333UCShank Spacing Opt: 9" 12" 9" 12" 9" 12" 9" 12" 9" 12" 9" 12"Number of Shanks: 29 22 33 24 37 28 39 30 41 32 45 34
Working Width: 21' 9" 24' 9" 23' 9" 27' 9" 29' 3" 29' 9" 30' 9" 33' 9" 32' 9"Transport Height: 10' 10" 12' 4" 11' 10" 13' 10" 14' 7" 14' 10" 13' 10" 15' 4" 14' 10"Transport Width: 13' 8" 13' 8" 13' 8" 13' 8" 16' 8" 16' 8"
PTO Requirements: 190-220 200-250 240-290 250-325 250-350 325-450
New Products 4 | 5
SD2600SD3000SD3300
MO
DEL
S
Features &Benefits
Short-Disk™
MODEL INFO Ultra-Chisel™
Models: 6321UC 6324UC 6327UC 6329UC 6330UC 6333UCShank Spacing Opt: 9" 12" 9" 12" 9" 12" 9" 12" 9" 12" 9" 12"Number of Shanks: 29 22 33 24 37 28 39 30 41 32 45 34
Working Width: 21' 9" 24' 9" 23' 9" 27' 9" 29' 3" 29' 9" 30' 9" 33' 9" 32' 9"Transport Height: 10' 10" 12' 4" 11' 10" 13' 10" 14' 7" 14' 10" 13' 10" 15' 4" 14' 10"Transport Width: 13' 8" 13' 8" 13' 8" 13' 8" 16' 8" 16' 8"
PTO Requirements: 190-220 200-250 240-290 250-325 250-350 325-450
MODEL INFO Short-Disk™
Models: SD2600 SD3000 SD3300Working Width: 26' 5" 29' 6" 33' 2"
Transport Height: 13' 8" 14' 3" 14' 3"Transport Width: 15' 3" 15' 3" 18' 8"
Blade Spacing: 10" 10" 10"Number Of Blades: 66 74 82
PTO H.P. Requirements: 300-400 350-450 400-500
The innovative Great Plains Short Disk™ combines European-style parallel gangs with the demands of rugged North American terrain to provide a consistent, high-speed primary tillage tool. While traditional short disks utilize 18-20" diameter disc blades, the aggressive Short Disk is designed to endure high-residue field conditions with 24" diameter discs to cut the ground up to 7" deep, maximizing trash flow and leaving a smooth finish on both the top and bottom.
With the speed and maneuverability of European disks, the Short Disk accurately follows uneven ground contours for consistent performance in varying field conditions. Its roller adjusts hydraulically from the tractor cab to either increase or decrease the consolidation pressure to firm the soil to the desired degree. In contrast to other parallel gang machines, the Short Disk’s blades split center, throwing out from the front and in from the back, to prevent “dog tracking” and ensure a consistent cutout throughout the field.
The Short Disk also features exclusive PEER® Maintenance-Free Tapered-Roller Bearing Hubs with 6-lip cassette seals per disk, as well as PEER® TILLXTREME® Maintenance-Free Bearings in the rolling attachments, extending the life of the bearings and reducing maintenance costs.
MAINTENANCE-FREE WALKING AXLES - Require no maintenance yet provide a stable ride and accurate depth control.
LARGE SEALED BEARINGS – Maintenance-Free hubs with "matched" tapered bearings.
SD3300 - Available May 2015
CONSOLIDATION WHEELS –Create a fine finish while consolidating the ground just below the surface.
INDIVIDUAL DISC MOUNTS – Offer more space between discs for excellent trash flow and better performance in wet conditions.
MODEL INFO Turbo-Max® (pg 8-9) Turbo-Till® Series II (pg 10-11) Turbo-Chopper® (pg 12-13) Ultra-Till® (pg 14-15) Sub-Soiler (pg 16-17) Turbo-Chisel® (pg 18-19)MODELS 1200TM 1500TM 1800TM 2400TM 3000TM 3500TM 4000TM 1200TT 1500TT 1800TT 2400TT 3000TT 4000TT 1200TC 1500TC 1800TC 2400TC 3000TC 4000TC UT3030 UT5036 UT5042 UT5052 SS1300 SS1700 SS1800 SS2000 TCN5107 TCN5309 TCN5311 TCN5313 TC5109 TC5111 TC5113 TC5115 TC5313 TC5315 TC5317 TC5319 TC5321 TC5323
SHANK SPACING N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 24", 30", 36", 38", 40" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15"
COULTER SPACING 3.75" (2 offset gangs at 7.5" spacing per gang) 5" (2 offset gangs at 10" spacing per gang) 10" 10" 10" 10" 10" 10" 8" 8" 8" 8" N/A N/A N/A N/A 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"
TIRES (transport) 11Lx15SL12-ply (4)
11Lx15SL12-ply (4)
480/45-17 (2)
340/60Rx16.5 (4)
380/55R16.5 (4)
440/55R 18 (4)
440/55R 18 (4)
11Lx15 F-ply (4)
11Lx15 F-ply (4)
380/55R16.5 (2)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4)
11Lx15F-ply (4)
11Lx15F-ply (4)
380/55R16.5 (2)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4)
11Lx15F-ply (4)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4) 20.5x8 10-ply (gauge wheels) 12.5Lx15 12-ply (4) 12.5Lx15 F-ply (4)
WEIGHT (approx. lbs.)
**11,900 **13,300 **15,200 **19,100 **23,300 **26,320 **31,500 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 12,000 14,700 17,450 21,500 3,170 (3 Shank)
5,509 (7 Shank)
4,850 (6 Shank)
6,350 (8 Shank) 7,300 10,500 11,500 12,100 8,080 9,835 11,240 12,600 11,280 12,900 13,700 14,200 15,650 16,250
PTO H.P. REQ (min) 120+ 150+ 180+ 240+ 300+ 340+ 380+ 115+ 140+ 180+ 230+ 285+ 380+ 115+ 140+ 180+ 230+ 285+ 380+ 150+ 180+ 200+ 300+ 50 per shank
50 per shank
50 per shank
50 per shank Option 20: 20 hp per shank Option 26: 30 hp per shank Option 26: 30 hp per shank
DIMENSIONS
TILLAGE WIDTH 12' 15' 18' 24' 30' 35' 40' 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 40' 30' 36' 42' 52' 7' 6" - 16' 15' - 20' 18' - 20' 21' - 24' 8' 9" 11' 3" 13' 9" 16' 3" 11' 3" 13' 9" 16' 3" 18' 9" 16' 3" 18' 9" 21' 3" 23' 9" 26' 3" 28' 9"
WIDTH (transport) 13' 6" 15' 6" 14' 15' 4" 15' 4" 16' 9" 18' 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 14' 8" 16' 7" 16' 7" 18' 11" 11' 8" 14' - 19' 5" 13' 1" 15' 5" 9' 9' 10" 9' 10" 9' 10" 11' 6" 14' 3" 16' 6" 19' 14' 6" 14' 6" 14' 9" 14' 9" 14' 9" 14' 9"
HEIGHT (transport) 5' 4" 5' 4" 8' 3" 11' 3" 14' 14' 4" 14' 2" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" 14' 4" 12' 8" 14' 3" 15' 6" N/A N/A N/A N/A 5' 9" 9' 5" 9' 10" 10' 3" N/A N/A N/A N/A 9' 6" 10' 3" 11' 12' 3" 13' 6" 14' 6"
TILLAGE INFO
CENTER SECTION 12' 15' 8' 10' 10' 12' 12' 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 12' 10' 10' 10' 12' 6" N/A N/A N/A N/A 9' 9' 9' 9' 10' 10' 10' 10' 10' 10' 10' 10' 10' 10'
1ST WING SECTION N/A N/A 5' 6' 9" 10' 11' 10' N/A N/A 5' 6' 6" 10' 10' N/A N/A 5' 6' 6" 10' 10' 9' 6" 8' 6" 9' 6" 10' 6" N/A N/A N/A N/A N/A 1' 9" 2' 6" 3' 9" N/A 2' 6" 3' 6" 4' 9" 3' 6" 4' 9" 6' 7' 3" 8' 9" 9' 6"
2ND WING SECTION N/A N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A 4' 6' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
MODEL INFO Disc-O-Vator (pg 24-25) Disk Harrow (pg 26-27) Field Cultivator (pg 28-29)MODELS 8315DVN 8318DVN 8321DVN 8324DVN 8321DV 8324DV 8326DV 8328DV 8333DV 8537DV 8544DV 8548DV 8552DV 7323DH 7326DH 7329DH 7330DH 7333DH 7336DH 8323FC 8328FC 8332FC 8336FC 8539FC 8544FC 8548FC 8551FC 8556FC 8560FC
NUMBER OF BLADES 24 28 32 36 30 36 38 42 48 54 64 70 76 9"66,7.5"78 9"74,7.5"86 9"82,7.5"98 9"86,7.5"102 9"94,7.5"110 9"102,7.5"122 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
NUMBER OF SWEEPS 27 31 37 41 35 41 45 49 57 63 75 81 89 N/A N/A N/A N/A N/A N/A 39 47 55 61 67 75 83 87 95 103
TIRES (transport) 12.5Lx16.5 G-ply (2) 15.5Lx16.5 G-ply (2) 9.5Lx15 8-ply (4) 11L-15SL 12-ply (4) 11Lx15 F-ply (4)
12.5Lx15 F-ply (4) 12.5Lx16.5 G-ply (4) (4) 340/60R 16.5 (transport);
(4) 12.5L x 15 (wings)(4) 380/55R 16.5 (transport);
(4) 12.5L x 15 (wings) 9.5Lx15 8-ply (4) 11Lx15 12-ply (4) 11Lx15 F-ply (4) 12.5Lx15 F-ply (4)
WEIGHT (approx.) 6,650 8,000 9,200 11,000 8,925 10,200 11,050 11,890 14,025 15,392 18,320 19,968 21,632 14,200 15,900 17,600 18,000 19,900 21,350 8,150 9,940 11,450 12,900 14,500 15,920 17,340 19,890 20,680 21,240
PTO H.P. REQ (min) 115+ 135+ 155+ 185+ 125+ 160+ 200+ 225+ 250+ 280+ 320+ 340+ 375+ 160+ 182+ 203+ 210+ 231+ 252+ 120-175 150-200 175-225 200-250 200-275 225-300 250-325 275-350 300-375 325-400
DIMENSIONS
TILLAGE WIDTH 15' 9" 17' 10" 21' 7" 23' 9" 20' 23' 9" 25' 3" 28' 32' 36' 42' 9" 46' 6" 50' 9" 23' 1" 26' 29' 30' 2" 33' 1" 35' 11" 23' 27' 9" 32' 6" 36' 39' 6" 44' 48' 9" 51' 55' 9" 60' 6"
WIDTH (transport) 9' 10" 9' 10" 9' 10" 9' 10" 14' 14' 14' 14' 16' 1" 15' 15' 18' 3" 18' 3" 14' 14' 14' 18' 2" 18' 2" 18' 2" 14' 14' 14' 16' 1" 15' 15' 15' 16' 10" 16' 10" 16' 10"
HEIGHT (transport) 8' 6" 9' 6" 10' 9" 12' 3" 9' 3" 10' 9" 12' 13' 3" 14' 3" 12' 6" 13' 3" 14' 9" 14' 9" 11' 6" 12' 10" 14' 2" 12' 8" 14' 15' 3" 10' 12' 6" 14' 9" 14' 9" 11' 9" 14' 14' 14' 16' 4" 16' 4"
TILLAGE INFOCENTER SECTION 8' 8' 8' 8' 9' 9" 9' 9" 9' 9" 9' 9" 12' 9' 9" 9' 9" 12' 12' 9' 6" 9' 6" 9' 6" 13' 6" 13' 6" 13' 6" 10' 10' 10' 12' 10' 10' 10' 12' 12' 12'
1ST WING SECTION 3.5' 5' 6.5' 8' 5' 6" 7' 6" 8' 6" 9' 6" 10' 6" 8' 6" 9' 6" 10' 9" 10' 9" 6' 7' 6" 9' 7' 6" 8' 11" 10' 4" 6' 6" 9' 11' 3" 11' 3" 8' 10' 6" 10' 6" 10' 6" 12' 9" 12' 9"
2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A 5' 7' 3" 7' 9' 3" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6' 6" 6' 6" 9' 9' 9' 11'
3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
MODEL INFO Lister Cultivator (pg 30-31) Seedbed Conditioner (pg 32-33) Flex Harrow (pg 36-37)MODELS LC40-1630 LC40-1236 LC40-1238 LC40-1240 LC25-0830 LC25-0836 LC25-0838 LC25-0840 LC25-0870 LC25-0875 LC25-081M 2112SC 2115SC 2317SC 2320SC 2322SC 2325SC 2327SC 2330SC 2332SC 2335SC 2536SC 2538SC 2541SC 2543SC 2546SC 2548SC 2551SC FH6424HD FH6630HD FH6636HD FH6642HD FH6845HD FH6848HD FH6851HD
ROW SPACING 30" 36" 38" 40" 30" (76.2cm) 36" (91.4cm) 38" (96.5cm) 40" (101.6cm) 70cm 75cm 1m N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
ROW COUNT 16(17 row units)
12(13 row units)
12(13 row units)
12(13 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
TIRES (transport) N/A 9.5Lx15 8-ply (2) 11Lx15 8-ply (2) 11Lx15 12-ply (2) or 9.5X15 12-ply (4) 11Lx15 8-ply 12.5Lx15 8-ply 12.5Lx15 12-ply
WEIGHT (approx. lbs) 13,000 - 15,500
11,000 - 13,000
11,000 - 13,000
11,000 - 13,000
5,750 -7,050
6,000 -7,300
6,000 -7,300
6,000 -7,300
5,750 -7,050
5,750 -7,050
6,000 -7,300 1,701 2,025 2,675 3,040 3,435 3,600 4,200 4,560 4,955 5,320 6,120 6,460 6,970 7,310 7,820 8,160 8,670 4,050+ 5,000+ 6,000+ 6,200+ 6,250+ 6,700+ 7,100+
PTO H.P. REQ (min) 320 250 250 250 170+ 170+ 170+ 170+ 170+ 170+ 170+ N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3-5 hp per foot
DIMENSIONSTILLAGE WIDTH 40' 36' 38' 40' 21' 3" 27' 11" 27' 11" 27' 11" 21' 3" 21' 3" 27' 11" 12' 6" 15' 17' 6" 20' 22' 6" 25' 27' 6" 30' 32' 6" 35' 36' 38' 6" 41' 43' 6" 46' 48' 6" 51' 24' 30' 36' 42' 45' 48' 51'
WIDTH (transport) 26' 26' 24' 8" 24' 8" 21' 3" 27' 11" 27' 11" 27' 11" 21' 3" 21' 3" 27' 11" 14' 3" 16' 10" 15' 15' 15' 15' 15' 15' 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8"
HEIGHT (transport) 14' 8" 6' 5" N/A N/A 7' 11" 9' 1" 10' 3" 11' 5" 12' 7" 13' 9" 13' 9" 14' 11" 12' 9" 12' 9" 12' 9" 14' 14' 14' 15' 3" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10"
TILLAGE INFOCENTER SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 12' 15' 10' 10' 10' 10' 10' 10' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12'
1ST WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 7' 6" 9' 10' 10' 12' 8' 8' 8' 9' 6" 9' 6" 9' 6" 10' 6" 6' 9' 12' 15' 16' 6" 18' 19' 6"
2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 6' 7' 6" 8' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A
3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
NUMBER OF BASKETS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3 3 5 5 5 7 7 7 7 7 8 8 8 8 8 10 10 N/A N/A N/A N/A N/A N/A N/A
NO. OF SECTIONS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4 6 6 6 8 8 8
MODEL INFO Turbo-Max® (pg 8-9) Turbo-Till® Series II (pg 10-11) Turbo-Chopper® (pg 12-13) Ultra-Till® (pg 14-15) Sub-Soiler (pg 16-17) Turbo-Chisel® (pg 18-19)MODELS 1200TM 1500TM 1800TM 2400TM 3000TM 3500TM 4000TM 1200TT 1500TT 1800TT 2400TT 3000TT 4000TT 1200TC 1500TC 1800TC 2400TC 3000TC 4000TC UT3030 UT5036 UT5042 UT5052 SS1300 SS1700 SS1800 SS2000 TCN5107 TCN5309 TCN5311 TCN5313 TC5109 TC5111 TC5113 TC5115 TC5313 TC5315 TC5317 TC5319 TC5321 TC5323
SHANK SPACING N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 24", 30", 36", 38", 40" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15"
COULTER SPACING 3.75" (2 offset gangs at 7.5" spacing per gang) 5" (2 offset gangs at 10" spacing per gang) 10" 10" 10" 10" 10" 10" 8" 8" 8" 8" N/A N/A N/A N/A 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5" 7.5"
TIRES (transport) 11Lx15SL12-ply (4)
11Lx15SL12-ply (4)
480/45-17 (2)
340/60Rx16.5 (4)
380/55R16.5 (4)
440/55R 18 (4)
440/55R 18 (4)
11Lx15 F-ply (4)
11Lx15 F-ply (4)
380/55R16.5 (2)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4)
11Lx15F-ply (4)
11Lx15F-ply (4)
380/55R16.5 (2)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4)
11Lx15F-ply (4)
11Lx15F-ply (4)
12.5Lx15F-ply (4)
380/55R16.5 (4) 20.5x8 10-ply (gauge wheels) 12.5Lx15 12-ply (4) 12.5Lx15 F-ply (4)
WEIGHT (approx. lbs.)
**11,900 **13,300 **15,200 **19,100 **23,300 **26,320 **31,500 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 **10,000 **12,200 **14,400 **18,600 **21,000 **25,800 12,000 14,700 17,450 21,500 3,170 (3 Shank)
5,509 (7 Shank)
4,850 (6 Shank)
6,350 (8 Shank) 7,300 10,500 11,500 12,100 8,080 9,835 11,240 12,600 11,280 12,900 13,700 14,200 15,650 16,250
PTO H.P. REQ (min) 120+ 150+ 180+ 240+ 300+ 340+ 380+ 115+ 140+ 180+ 230+ 285+ 380+ 115+ 140+ 180+ 230+ 285+ 380+ 150+ 180+ 200+ 300+ 50 per shank
50 per shank
50 per shank
50 per shank Option 20: 20 hp per shank Option 26: 30 hp per shank Option 26: 30 hp per shank
DIMENSIONS
TILLAGE WIDTH 12' 15' 18' 24' 30' 35' 40' 12' 15' 18' 24' 30' 40' 12' 15' 18' 24' 30' 40' 30' 36' 42' 52' 7' 6" - 16' 15' - 20' 18' - 20' 21' - 24' 8' 9" 11' 3" 13' 9" 16' 3" 11' 3" 13' 9" 16' 3" 18' 9" 16' 3" 18' 9" 21' 3" 23' 9" 26' 3" 28' 9"
WIDTH (transport) 13' 6" 15' 6" 14' 15' 4" 15' 4" 16' 9" 18' 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 12' 3" 15' 6" 12' 3" 15' 6" 15' 6" 17' 6" 14' 8" 16' 7" 16' 7" 18' 11" 11' 8" 14' - 19' 5" 13' 1" 15' 5" 9' 9' 10" 9' 10" 9' 10" 11' 6" 14' 3" 16' 6" 19' 14' 6" 14' 6" 14' 9" 14' 9" 14' 9" 14' 9"
HEIGHT (transport) 5' 4" 5' 4" 8' 3" 11' 3" 14' 14' 4" 14' 2" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" N/A N/A 8' 9" 10' 3" 13' 6" 14' 3" 14' 4" 12' 8" 14' 3" 15' 6" N/A N/A N/A N/A 5' 9" 9' 5" 9' 10" 10' 3" N/A N/A N/A N/A 9' 6" 10' 3" 11' 12' 3" 13' 6" 14' 6"
TILLAGE INFO
CENTER SECTION 12' 15' 8' 10' 10' 12' 12' 12' 15' 8' 10' 10' 12' 12' 15' 8' 10' 10' 12' 10' 10' 10' 12' 6" N/A N/A N/A N/A 9' 9' 9' 9' 10' 10' 10' 10' 10' 10' 10' 10' 10' 10'
1ST WING SECTION N/A N/A 5' 6' 9" 10' 11' 10' N/A N/A 5' 6' 6" 10' 10' N/A N/A 5' 6' 6" 10' 10' 9' 6" 8' 6" 9' 6" 10' 6" N/A N/A N/A N/A N/A 1' 9" 2' 6" 3' 9" N/A 2' 6" 3' 6" 4' 9" 3' 6" 4' 9" 6' 7' 3" 8' 9" 9' 6"
2ND WING SECTION N/A N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A N/A N/A N/A N/A 4' N/A 4' 6' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
MODEL INFO Disc-O-Vator (pg 24-25) Disk Harrow (pg 26-27) Field Cultivator (pg 28-29)MODELS 8315DVN 8318DVN 8321DVN 8324DVN 8321DV 8324DV 8326DV 8328DV 8333DV 8537DV 8544DV 8548DV 8552DV 7323DH 7326DH 7329DH 7330DH 7333DH 7336DH 8323FC 8328FC 8332FC 8336FC 8539FC 8544FC 8548FC 8551FC 8556FC 8560FC
NUMBER OF BLADES 24 28 32 36 30 36 38 42 48 54 64 70 76 9"66,7.5"78 9"74,7.5"86 9"82,7.5"98 9"86,7.5"102 9"94,7.5"110 9"102,7.5"122 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
NUMBER OF SWEEPS 27 31 37 41 35 41 45 49 57 63 75 81 89 N/A N/A N/A N/A N/A N/A 39 47 55 61 67 75 83 87 95 103
TIRES (transport) 12.5Lx16.5 G-ply (2) 15.5Lx16.5 G-ply (2) 9.5Lx15 8-ply (4) 11L-15SL 12-ply (4) 11Lx15 F-ply (4)
12.5Lx15 F-ply (4) 12.5Lx16.5 G-ply (4) (4) 340/60R 16.5 (transport);
(4) 12.5L x 15 (wings)(4) 380/55R 16.5 (transport);
(4) 12.5L x 15 (wings) 9.5Lx15 8-ply (4) 11Lx15 12-ply (4) 11Lx15 F-ply (4) 12.5Lx15 F-ply (4)
WEIGHT (approx.) 6,650 8,000 9,200 11,000 8,925 10,200 11,050 11,890 14,025 15,392 18,320 19,968 21,632 14,200 15,900 17,600 18,000 19,900 21,350 8,150 9,940 11,450 12,900 14,500 15,920 17,340 19,890 20,680 21,240
PTO H.P. REQ (min) 115+ 135+ 155+ 185+ 125+ 160+ 200+ 225+ 250+ 280+ 320+ 340+ 375+ 160+ 182+ 203+ 210+ 231+ 252+ 120-175 150-200 175-225 200-250 200-275 225-300 250-325 275-350 300-375 325-400
DIMENSIONS
TILLAGE WIDTH 15' 9" 17' 10" 21' 7" 23' 9" 20' 23' 9" 25' 3" 28' 32' 36' 42' 9" 46' 6" 50' 9" 23' 1" 26' 29' 30' 2" 33' 1" 35' 11" 23' 27' 9" 32' 6" 36' 39' 6" 44' 48' 9" 51' 55' 9" 60' 6"
WIDTH (transport) 9' 10" 9' 10" 9' 10" 9' 10" 14' 14' 14' 14' 16' 1" 15' 15' 18' 3" 18' 3" 14' 14' 14' 18' 2" 18' 2" 18' 2" 14' 14' 14' 16' 1" 15' 15' 15' 16' 10" 16' 10" 16' 10"
HEIGHT (transport) 8' 6" 9' 6" 10' 9" 12' 3" 9' 3" 10' 9" 12' 13' 3" 14' 3" 12' 6" 13' 3" 14' 9" 14' 9" 11' 6" 12' 10" 14' 2" 12' 8" 14' 15' 3" 10' 12' 6" 14' 9" 14' 9" 11' 9" 14' 14' 14' 16' 4" 16' 4"
TILLAGE INFOCENTER SECTION 8' 8' 8' 8' 9' 9" 9' 9" 9' 9" 9' 9" 12' 9' 9" 9' 9" 12' 12' 9' 6" 9' 6" 9' 6" 13' 6" 13' 6" 13' 6" 10' 10' 10' 12' 10' 10' 10' 12' 12' 12'
1ST WING SECTION 3.5' 5' 6.5' 8' 5' 6" 7' 6" 8' 6" 9' 6" 10' 6" 8' 6" 9' 6" 10' 9" 10' 9" 6' 7' 6" 9' 7' 6" 8' 11" 10' 4" 6' 6" 9' 11' 3" 11' 3" 8' 10' 6" 10' 6" 10' 6" 12' 9" 12' 9"
2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A 5' 7' 3" 7' 9' 3" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 6' 6" 6' 6" 9' 9' 9' 11'
3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
MODEL INFO Lister Cultivator (pg 30-31) Seedbed Conditioner (pg 32-33) Flex Harrow (pg 36-37)MODELS LC40-1630 LC40-1236 LC40-1238 LC40-1240 LC25-0830 LC25-0836 LC25-0838 LC25-0840 LC25-0870 LC25-0875 LC25-081M 2112SC 2115SC 2317SC 2320SC 2322SC 2325SC 2327SC 2330SC 2332SC 2335SC 2536SC 2538SC 2541SC 2543SC 2546SC 2548SC 2551SC FH6424HD FH6630HD FH6636HD FH6642HD FH6845HD FH6848HD FH6851HD
ROW SPACING 30" 36" 38" 40" 30" (76.2cm) 36" (91.4cm) 38" (96.5cm) 40" (101.6cm) 70cm 75cm 1m N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
ROW COUNT 16(17 row units)
12(13 row units)
12(13 row units)
12(13 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units)
8(9 row units) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
TIRES (transport) N/A 9.5Lx15 8-ply (2) 11Lx15 8-ply (2) 11Lx15 12-ply (2) or 9.5X15 12-ply (4) 11Lx15 8-ply 12.5Lx15 8-ply 12.5Lx15 12-ply
WEIGHT (approx. lbs) 13,000 - 15,500
11,000 - 13,000
11,000 - 13,000
11,000 - 13,000
5,750 -7,050
6,000 -7,300
6,000 -7,300
6,000 -7,300
5,750 -7,050
5,750 -7,050
6,000 -7,300 1,701 2,025 2,675 3,040 3,435 3,600 4,200 4,560 4,955 5,320 6,120 6,460 6,970 7,310 7,820 8,160 8,670 4,050+ 5,000+ 6,000+ 6,200+ 6,250+ 6,700+ 7,100+
PTO H.P. REQ (min) 320 250 250 250 170+ 170+ 170+ 170+ 170+ 170+ 170+ N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3-5 hp per foot
DIMENSIONSTILLAGE WIDTH 40' 36' 38' 40' 21' 3" 27' 11" 27' 11" 27' 11" 21' 3" 21' 3" 27' 11" 12' 6" 15' 17' 6" 20' 22' 6" 25' 27' 6" 30' 32' 6" 35' 36' 38' 6" 41' 43' 6" 46' 48' 6" 51' 24' 30' 36' 42' 45' 48' 51'
WIDTH (transport) 26' 26' 24' 8" 24' 8" 21' 3" 27' 11" 27' 11" 27' 11" 21' 3" 21' 3" 27' 11" 14' 3" 16' 10" 15' 15' 15' 15' 15' 15' 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 17' 6" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8" 12' 8"
HEIGHT (transport) 14' 8" 6' 5" N/A N/A 7' 11" 9' 1" 10' 3" 11' 5" 12' 7" 13' 9" 13' 9" 14' 11" 12' 9" 12' 9" 12' 9" 14' 14' 14' 15' 3" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10" 10' 10"
TILLAGE INFOCENTER SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 12' 15' 10' 10' 10' 10' 10' 10' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12' 12'
1ST WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 7' 6" 9' 10' 10' 12' 8' 8' 8' 9' 6" 9' 6" 9' 6" 10' 6" 6' 9' 12' 15' 16' 6" 18' 19' 6"
2ND WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4' 5' 6' 6' 7' 6" 8' 6" 8' 6" N/A N/A N/A N/A N/A N/A N/A
3RD WING SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
NUMBER OF BASKETS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3 3 5 5 5 7 7 7 7 7 8 8 8 8 8 10 10 N/A N/A N/A N/A N/A N/A N/A
NO. OF SECTIONS N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 4 6 6 6 8 8 8
Plains Plow (pg 34-35)9322PP 9326PP 9533PP 9540PP 9744PP 9748PP 9752PP 9756PP
6 7 9 11 12 13 14 15
6 7 9 11 12 13 14 1511Lx15SL 12-ply (2)
11Lx15 8-ply (2)
11Lx15SL 12-ply (2)
11Lx15SL 12-ply (2) 11Lx15 F-ply 11Lx15 F-ply
8,160 9,220 11,500 13,480 17,300 18,620 19,220 20,540
150-205 180-240 230-305 285-370 310-405 335-440 360-478 385-510
22' 4" 26' 33' 4" 40' 8" 44' 4" 48' 51' 8" 55' 4"
13' 16' 8" 18' 18' 21' 10" 25' 6" 21' 10" 25' 6"
12' 6" 12' 6" 14' 6" 13' 6" 14' 6" 14' 6" 14' 6" 14' 6"
7' 6" 10' 10' 10' 7' 6" 10' 7' 6" 10'
8' 8' 7' 8' 7' 6" 7' 7' 6" 7' 6"
N/A N/A 4' 7' 7' 7' 8' 8'
N/A N/A N/A N/A 4' 4' 7' 7'
Tillage Specs 6 | 7
*24-inch spacing available on even number of shank models only. **Approximate maximum weights with attachments.
Note: All specifications subject to change without notice.
VERTICAL TILLAGE
• Horizontal tillage leaves yield-robbing density-change layers in the soil.
• Roots in a top, lower-density layer are turned sideways when a higher- density layer is encountered.
• Vertical tillage leaves a uniform, unrestricted soil profile that promotes maximum root development and increased yields.
• Plants raised in a vertical tillage system are more drought resistant, reach and utilize more nutrients, and have greater standability due to healthier stalks and root systems.
• Vertical tillage INCREASES YIELDS!
Tillage?Why Vertical
Vertical TillageConventional Tillage
Field Cultivator
Disk
Plow
- Finishing tool that levels the soil without using sweeps. This tool evenly distributes residue and levels the field without causing a density change that can discourage root growth. The Ultra-Till performs best when following some form of heavier tillage.
- Designed for the corn-on-corn producers to loosen all root balls, size residue, and leave the ground level enough for one pass in the spring. Coulters run up to 4" deep and shanks up to 12".
- Eliminates compaction layers and soil density changes in one pass. Choice of no-till or straight leg shanks.
Vertical Tillage 8 | 9
ULTRA-TILL®
TURBO-CHISEL®SUB-SOILER (Shown with optional pull hitch.)
- Very versatile tool that sizes residue and prepares the seedbedwithout introducing yield-damaging horizontal layers.
TURBO-TILL® SERIES II
- Allows for a “crisscross” pattern for chopping residue and working the soil while still maintaining the benefits of vertical tillage.
TURBO-CHOPPER®
- With its 7-1/2" blade spacing and adjustable gang angle from 0° to 6°, provides more aggressive ground leveling, while sizing and anchoring residue.
TURBO-MAX®
Taking Vertical Tillageto the Max
Turbo-Max® brings true vertical tillage to new heights! The ability to provide unmatched seedbeds through aggressive ground leveling and weed removal, enhanced residue sizing, and unsurpassed residue coverage makes Turbo-Max truly unique in the industry today. Most farmers have understood the benefits of true vertical tillage for several years, but have needed a way to address uneven fields caused by sprayer, combine, or grain cart tracks, and better residue coverage to help eliminate wind erosion.
Turbo-Max, with its 7-1/2" blade spacing and hydraulically-adjustable gang angle from 0° to 6°, continues to work in a vertical plane through all aspects of operation, providing the answer to today’s producers looking for all of the advantages of true vertical tillage in one piece of equipment. Turbo-Max is the result of Great Plains’ commitment to provide equipment that fulfills customers’ needs while remaining agronomically sound, producing the best environment for maximum yields.
ROLLING HARROW AND REEL - Loos-ens, levels, and breaks up clods. This attachment puts the “finishing touch” on the perfect seedbed.
Attachment
Turbo-Max® 10 | 11
7-1/2" BLADESPACING - Two gangs, each with 7-1/2" spacing between coulters, with the rear gang offset from the front gang. The gangs work together to size residue to an industry-leading 3-3/4".
PATENTED HYDRAULICALLY-ADJUSTABLE GANG ANGLE - Turbo-Max allows you to change the gang angle on the go to match it to field conditions. Adjust-ments can be from 0° to 6°.
0 Degree Gang Angle
6 Degree Gang Angle
7.5 7.57.5
1200TM1500TM1800TM2400TM3000TM3500TM4000TM
MO
DEL
S
Features &Benefits
HYDRAULIC WEIGHT TRANSFER - Transfer valve adjusts weight from center to wings, providing even, con-stant down pressure to the full width.
TM
• Maintenance-Free
• Self-Aligning
The Series II Turbo-Till® builds on the solid reputation of theoriginal Turbo-Till as the most versatile vertical tillage toolavailable. It utilizes two ranks of our exclusive Turbo Coulters to aggressively chop residue without hairpinning. Turbo-Till effectively manages residue and reduces compaction in a wide range of conditions, providing a consistent, well-prepared seedbed for planting.
Improvements to the Series II include 3" C-shanks and
PEER® Maintenance-Free Bearings.
Current uses include warming and drying cool wet soils, incorporating animal waste, and preparing a smooth, level seedbed for planting. Turbo-Till, available in sizes from 12' to 40', is also an excellent fall tool to size and incorporate residue to promote the decaying process.
DROP AXLE - The greaseless anti-rotational pivot pin virtually eliminates wear in the drop axle pivot.
TURBO COULTER - The turbo design allows the blade flute to attack the residue vertically, provid-ing improved cutting, penetration, and decreased hairpinning.
ATTACHMENT
HYDRAULIC WEIGHT TRANSFER - Transfer valve ad-justs weight from center to wings, providing even, constant down pressure to the full width.
Rolling Harrow & Reel
TURBO-TILL - Turbo Coult-ers combined with patented rolling spike harrows, create a smooth, level surface on top of the ground and at the planting depth, ensuring the planter runs smoothly and seed is precisely placed into a firm seedbed for quick emergence.
SPRING COULTERS - Spring coulter machines raise and lower (vibrate) as soil density changes, leaving a rough, uneven sub-sur-face. A planter following a spring coulter machine has a tough time placing seed accurately.
CONCAVE FLUTED COULTERS - Concave fluted coulters/disks may look like Turbo Coulters, but move soil horizontally, causing compaction. Concave blades running at an angle cause ridging at high speeds. The uneven sub-surface results in poor seed placement and emergence.
Smooth
Rough
Compacted
Features &Benefits
Tillage Pass Planter Pass
Gre
at P
lain
sCo
mpe
titor
Com
petit
or
1200TT
2400TT1800TT
4000TT
MO
DEL
S
1500TT
3000TT
Turbo-Till® Series II 12 | 13
Leadingthe Pack TM
• Maintenance-Free
• Self-Aligning
ROLLING SPIKE HARROW - Loosens, levels, and breaks up clods. This attachment puts the “finish-ing touch” on the perfect seedbed.
CHOPPER BLADES - The angled chopper blades run perpendicularly to the Turbo Blades, ensuring complete and thorough chopping of the residue and a profile that is level and uniform to the depth of the front coulters.
The Turbo-Chopper® from Great Plains combines our aggressive Turbo Blades with the action of a turbo-patterned chopper reel. This allows for a “crisscross” pattern for chopping residue and working the soil, while still maintaining the benefits of vertical tillage. This unit offers the versatility of a fall tillage tool, combined with its use as a spring tillage unit for seedbed preparation. The “crisscross” pattern of this unit allows aggressive, uniform residue sizing. The Turbo Coulters are 20" in diameter with 10" spacing, followed by the 18" diameter chopper reels. Both gangs of coulter and chopper reels are mounted
on heavy 3" C-shanks with maintenance-free 211 bearings.
The 18" chopper reels consist of six 4-1/2" high carbon steel blades. The unique spiral design allows constant contact with the soil to maximize cutting and reduce the vibration experienced with competitive reels. The chopper reels work perpendicularly to the Turbo Coulters, providing a smooth seedbed for your planter. Our patented rolling harrow and reel combination is the recommended rear attachment for the ultimate seedbed for your planter.
Tillage PassTurbo Coulter Gangs
Turbo Chopper Gangs
TURBO-CHOPPER - Sizes residue from two directions in one pass. Coulters run between each chopper reel and in the middle of the C-shank mounting locations.
HYDRAULIC WEIGHT TRANSFER - Transfer valve ad-justs weight from center to wings, providing even, constant down pressure to the full width.
Features &Benefits
TM
• Maintenance-Free
• Self-Aligning
MO
DEL
S
1500TC1200TC
3000TC2400TC1800TC
4000TC
Which seedbed will your planter like?Turbo-Chopper® 14 | 15
Competitor
Turbo-Chopper
Turbowith a Twist
HYDRAULIC WEIGHT TRANSFER - Transfer valve ad-justs weight from center to wings, providing even, constant down pressure to the full width.
CONSTANT LEVEL HITCH - The exclusive hitch design provides continuous leveling of the unit as it is raised and lowered.
ROLLING HARROW MODULES - Prepare the perfect seedbed by leveling the ground and crushing the clods.
Ultra-Till® by Great Plains is yet another innovative option in the “systems” approach to vertical tillage. It is intended for secondary field operations and one-pass field finishing prior to planting. The Ultra-Till can be compared to a field finisher or cultivator, but with one major difference. Because it’s not equipped with shank-mounted sweeps, it will not create yield-robbing horizontal soil density layers. It is these compacted layers that roots have trouble penetrating.
The Ultra-Till can be equipped with low-concavity disc blades or our exclusive Turbo Coulters on the front to effectively cut residue into manageable pieces and loosen the seedbed soil. Blade depth is controlled hydraulically. Following the front coulters or disc blades are two rows of opposing rolling harrow gangs, angled at 30°. The rear gangs move the residue back into place, leaving a smooth, firm surface for a perfect seedbed.
Features &Benefits
UltimateSeedbed
SeedbedM
OD
ELS UT3030
UT5052UT5042UT5036
Ultra-Till® 16 | 17
Reel Attachment
The Great Plains Inline Sub-Soiler is another step in the evolution of our vertical tillage family designed to eliminate yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements. The Inline Sub-Soiler’s frame features high-tensile 3/8" wall tubing for added strength and durability. Sub-Soilers are available in 24", 30", 36", 38", or 40" shank spacings and from 7 shanks on 36", 38", or 40", up to 12 on 24". Choose from two shank options: 3/4" and 1-1/4". The 3/4" no-till shank and no-till point provide maximum shatter with minimum surface disturbance. The 1-1/4" straight leg shank creates more surface disturbance for minimum tillage.
Before After
DestroyLayers
Shown with optional pull hitch
SS1300SS1700SS1800SS2000
MO
DEL
S
HEAVY-DUTY HINGES - Rein-forced large-diameter greaseable pivot pins and extra heavy steel gussets mean the wings can take as much abuse as the center section.
ADJUSTABLE GAUGE WHEEL - A screw jack makes adjusting the gauge wheels simple and easy.
AUTO RESET WITH 3/4" SPRING STEEL SHANK - Our exclusive 10" no-till point minimizes soil distur-bance while creating maximum fracture below the surface.
SHEAR BOLT WITH 1-1/4" STRAIGHT SHANK - Available with either 2" or 7" points. Will not only fracture under the surface, but will create more surface disturbance.
BERM CONDITIONER - Designed to firm the soil after density layers are reset by the Sub-Soiler shanks.
Shank Selection
Sub-Soiler 18 | 19
Berm Conditioner Attachment Features &Benefits
Shown with optional pull hitch
If your goal is to size and incorporate residue in the top 8-12" of soil while leaving the soil level enough for a single-pass tool in the spring, the Great Plains Turbo-Chisel® is the tool of choice!
Great Plains’ exclusive 22" Turbo Coulters on 7-1/2" spacing start the process by slicing residue. The 22" blades run on a 1-3/4" gang bolt with cast spools, putting the weight “in the gang” for outstanding performance and reliability. The gang bearings are field-proven maintenance-free 211 bearings with cast housings mounted to our heavy-duty 1" x 3" C-shank standards. The coulter bar is hydraulically adjustable for on-the-go depth control.
Models available are 9-15 shank rigid or 7-23 shank folding with a recommended horsepower requirement of 30 hp per shank. Units can be equipped with either standard chisel shanks throughout, or toggle trip parabolic shanks. The heavy-duty toggle trip shank trips at 2,450 lbs ensuring consistent depth up to 12" deep with uniform horizontal fracture. Rear attachment options include the choice of a “buster bar” to level and smooth the ground or our Great Plains chopper wheels to crumble clods while firming the soil.
There are other coulter chisels available on the market… but there is only one Turbo-Chisel!
Buster Bar Chopper Wheel
Attachments
TC5313, TC5315,
TC5109, TC5111,
TCN5311, TCN5313TCN5107, TCN5309,
TC5113, TC5115
TC5317, TC5319,TC5321, TC5323
MO
DEL
S
TURBO COULTER - The turbo design allows the blade flute to attack the residue vertically, pro-viding improved cutting and penetration with decreased hairpinning.
Shank Combinations
Turbo-Chisel® 20 | 21
TOGGLE TRIP RESET SHANK - The Heavy-Duty Toggle Trip Shank has a 2,450-pound horizontal trip force and will automatically reset when tripped.
Narrow Transport
Folding
Rigid
Features &Benefits
HybridChisel
Std. Chisel Shank Std. Chisel ShankHvy.-Duty Parabolic Hvy.-Duty Parabolic
SHANK COMBINATIONS- Order the Turbo-Chisel the way you want it with two different shank combina-tions: Standard-Chisel or Heavy-Parabolic.
TM
• Maintenance-Free
• Self-Aligning
Every farming operation has different and diverse needs, and, at times, conventional tillage equipment is the best solution. We have focused our conventional tillage line around dependability and unconventional features that distinguish our products from the competition.
Our Disk Harrows incorporate features such as hydraulic leveling, tension nuts on each end of the gang bolts, and heavy-duty C-shanks with maintenance-free 211 bearings. These key features are just a few examples of benefits that provide the user with the best performing, most reliable disk in the industry.
Our secondary and finish tools include the versatile Disc-O-Vator® and Field Cultivator. Both feature the Max-MixTM Shank pattern. This exclusive pattern ensures that no shank is closer than 28" on an individual bar. Soil is moved
one direction, then returned, providing excellent residue distribution and superior herbicide incorporation.
The Disc-O-Vator also utilizes a single row of low-concavity disc blades or our exclusive Turbo Coulter. The Turbo Coulter allows the tool to operate in higher residue situations, and at higher speeds, sizing the residue for better flow through the shanks.
Our finishing tools include the Seedbed Conditioner. This tool crumbles clods and firms the seedbed to create the perfect planting environment.
The Plains Plow is a specialty tool aimed at wheat-producing states. It kills weeds, while leaving the stubble on the surface.
Every Great Plains conventional tillage tool is field proven and has the reputation of being at the “top of their class”.
Conventional Tillage
- Max-MixTM Pattern, low concave blades or Turbo Coulters, choice of magnum or heavy-duty K-Flex shank, full 24" under-frame clearance
DISC-O-VATOR®
- Hydraulically controlled front to rear gang leveling, 6.5" diameter ductile cast gang spools, spacing options of 7.5" and 9"
DISK HARROW
The “Unconventional” Way of Doing
Conventional Tillage 22 | 23
- Max-Mix™ Pattern, full 24" under-frame clearance, optional floating tongue
FIELD CULTIVATOR
- 4x4 heavy wall frame, low-rise blades for shallow working depth,single point depth adjustment, 4' blades for less ridging and better depth control
PLAINS PLOW
- 16" reels with 1" dia. hardened rods, one pair hydraulic hoses, 9.5Lx15 transport tires, optional hydraulic weight transfer
SEEDBED CONDITIONER
- The most recent addition to our conventional tillage line, these harrows are heavy duty and built to last.
FLEX HARROW
- The Lister Cultivator combines a stack-fold toolbar with versatile parallel linkage row units.
LISTER CULTIVATOR
GANG DESIGN - Rugged gang design with con-cave or Turbo Blades on 8" spacing and improved scraper design.
HITCH DESIGN - A clean, narrow-profile, self-leveling hitch design with turnbuckle height leveling adjustment.
MAX-MIXTM - The Max-Mix shank pattern increases chemical incorporation, reduces windrowing, and helps eliminate banding.
Great Plains raised the bar with the introduction of the 8000 Series Disc-O-Vator® line com-prised of 13 models with work-ing widths from 15' to 52'. Four of the models are specifically designed for narrow transport needs and can be purchased in 15' to 24' versions. Seven-inch shank spacing with 9" sweeps ensure good cutout.
In today’s farming economy, it’s all about getting more done in a day. The Great Plains Disc-O-Vator is one of the industry’s
most productive tillage tools, allowing you to combine disking, cultivating, harrowing, and herbicide incorporation … all in a single pass. Legend-ary strength is at the heart of all Disc-O-Vators with rugged frames that are engineered to flex and hug rolling terrain. The full line of options and finish-ing attachments enable you to custom build a Disc-O-Vator to fit the requirements of your operation.
Shank Selection
Disc Selection
HEAVY-DUTY MAGNUM SHANK - Performs with 205 lbs of point pressure and contains a thicker spring. Has the ability to “unhook” from obstructions, making it a good choice in rocks.
HEAVY-DUTY K-FLEX SHANK - Has a 5/8" x 3" wide upper leaf spring and 5/8" x 1-3/4" lower shank to provide 185 lbs of point pressure, giving the shank strength to penetrate and stay level at higher speeds while minimizing side play.
TURBO COULTERS - Chop residue and loosen the soil for the field cultivator shanks. Turbo gangs allow faster ground speed and increased productivity without ridging.
LOW-CONCAVITY DISC BLADES - Increases mixing action with the soil and buries more residue.
Discovator is a registered trademark of Great Plains Mfg., Inc.
High-Residue 5-Row Spike/7-Row Spike
4-Row Coil Tine
HD 3-Bar Spike with Reel
EasyTransport
Features &Benefits
Attachments
MO
DEL
S
8315DVN, 8318DVN,8321DVN, 8324DVN
8321DV, 8324DV,8326DV, 8328DV,8333DV, 8537DV,8544DV, 8548DV,8552DVNarrow Transport
8000 Series Disc-O-Vator® 24 | 25
DOUBLE OFFSET - Design ensures complete center cutout and eliminates the need for a middle breaker.
SPRING-LOADED SCRAPERS - Standard scrapers are spring loaded; quickly make them rigid by tighten-ing a bolt.
Features &Benefits
SPRING-OFFSET C-SHANKS - Offset C-shanks cushion the gangs and protect the unit. The offset design maximizes the clearance between the disc blades to help prevent plugging.
HYDRAULIC GAUGE WHEELS - Eliminates the need to adjust gauge wheels when depth is changed. Eliminates gouging and wing hop. (29', 33', and 36' models only) Crank adjusted on 23', 26', and 30' models.
VIRTUALLY MAINTENANCE-FREE - Great Plains uses the exclusive PEER® TILLXTREME® Maintenance-Free Pillow-Block Bearings in its gangs, as well as smaller TILLXTREME Maintenance-Free Bearings in its rolling attachments.
TILLXTREME BEARINGS FEATURE:
• Longer Life*
• Multi-Zone Lubrication
• Dynamic Alignment - 360 degree
• Maintenance-Free - no need for daily relube
• Save Time - up to 25 extra acres per day
• Save Money - no grease to purchase
Couple those features with all maintenance-free pivot points to get a zerkless disk that saves you even more time and lasts longer than competitive disks.
Zerkless
TM
* Double the life of the competition with no relubrication!Ref. - PEER, MUD Slurry Test
In response to customer feedback and continued market demand for quality conventional tillage imple-ments, Great Plains has released its new and improved 7000 Series Disk Harrow. After enduring intense field tests over several tillage seasons, the new 7000 Series Disk is ready to take on all contenders in the highly-com-petitive disk harrow market.
Like its predecessor, the 7000 Series Disk Harrow delivers the reliabil-ity and performance Great Plains customers have come to expect. Its double offset gang configuration remains one of the most effective methods to mechanically eliminate weeds while re-leveling rutted fields.
7000 Series Disk Harrow 26 | 27
7323DH
7330DH7329DH
7333DH
MO
DEL
S
7326DH
7336DH
7000 SeriesDisk Harrow
HEAVIER SPOOLS - The ductile cast spools used on the Great Plains Disk are among the heaviest in the industry. At 23.55 lbs, they put more weight closer to the ground. The result is better penetration, plus longer bearing and stan-dard life. Ductile cast spools also resist breakage and collapsing compared to steel pipe-style spacers. These spools are a full 6.5" in diameter – as much as 1'' larger than some competitors’. This gives more support to the center of the blade, reducing blade breakage.
Attachments
Additional Features
Great Plains Case IH Krause SunflowerDuctile Cast Ductile Cast Ductile Cast Welded
Dia: 6.5" Dia: 6" Dia: 5.5"/6" Dia: 6.25"Weight: 23.55#
Weight: 19.20#
Weight: 15.35#
Weight: 11.90#
• 3-Bar Coil Tine Harrow• 3-Bar Spike Harrow• Reel Harrow
1) Plate-to-mount gauge wheel 2) Maintenance-free pivot points 3) Improved caster pivot design 4) All 6-bolt hubs are heavy 4500# (same as Disc-O-Vator) 5) Better balance to handle heavier attachments 6) Common turnbuckles & gauge wheel assemblies 7) Modified low-profile hitch 8) Convenient hose storage 9) Ball joint attachment point at rear of hitch 10) Improved shank spacing with no shanks closer than 28"
11) Improved light package 12) Integrated rear hitch common w/Disc-O-Vator; same for all drag attachments 13) Heavier hinge plates 14) Slot-fold system versus rocker bracket 15) Inside wing wheels have been moved further back to accommodate floating hitch machines 16) Heavier wing wheel arms 17) Improved fold system 18) Heavier hinges on outside wings 19) Easier wing wheel adjustment
SHANK IMPROVEMENT - Improved shank spacing around tires and throughout the machine with no shanks closer than 28" on entire implement.
LOW-PROFILE HITCH - New low-profile hitch with heavy-duty ball joint attachment and convenient hose storage area. (Floating Hitch shown)
FOLDING SYSTEM - Improved fold system with heavier hinges on both inside and outside wings.
3-Row Spike & Reel High-Residue 4-Bar Spike or 5-Bar (Std.) 4-Row Coil Tine/3 Coil Tine & Reel
8000 Series Improvements19 18 17
16
13
11
8
75
4
63
21
9
10
15 14
12
8000 Series Improvements
Features &Benefits
MAX-MIX™ - The Max-Mix shank pattern increases chemical incorporation, reduces windrowing, and helps eliminate banding.
Constant Level Hitch
MO
DEL
S
Several changes and enhance-ments were made to the 8000 Series Field Cultivator to make a good unit even better! Shank spacing throughout the ma-chine, especially around tires, has been improved, ensuring no shanks are closer than 28". The hinges and fold system have also been “beefed up”, making folding and unfolding smoother and more reliable. Heavier 6-bolt hubs are used in all locations on all models and
the tongue is now low pro-file and “single pole” to allow tighter turns without interfer-ence with the tractor‘s 3-point hitch quick coupler. On floating hitch models, the wing wheels are moved back for better bal-ance and allow heavier harrow attachments without hav-ing negative tongue weight. Caster wheel design has been improved for better reliability and the pivot points are now maintenance free.
8323FC, 8328FC,8332FC, 8336FC,8539FC, 8544FC,8548FC, 8551FC, 8556FC, 8560FC
8000 Series Field Cultivator 28 | 29
CultivatingChange
Features &Benefits
3-POINT HITCH - The 3-point lift frame extends the length of thecenter section, creating a fully trussed mainframe. The Lister Culti-vator is available in category 3N, 3, 4N, and 4 configurations.
MULTIPLE ROW UNIT CONFIGURATIONS - Choose from short or long lister bodies with barring off discs as an option, or short or long cultivator sweeps with a choice of depth coulters or depth tires with ability to add a side shield to either cultivator configuration.
40' and 25' ListerCultivators
LC40
Benefits
Lister Cultivator 30 | 31
The Lister Cultivator is built in the spirit of other Great Plains equipment with a focus on innovation, functionality, and toughness.
The LC40 Lister Cultivator combines a stack-fold toolbar with versatile parallel linkage row units. The new LC25 utilizes the same row units in a narrower, non-folding frame. The parallel linkage and depth band coulters allow for precise depth gauging on individual rows. The row units can be configured to 30", 36", 38", and 40" row spacings. Users can configure it as a lister or turn it into a row-crop cultivator with rear sweeps.
Additional benefits include:
• Thicker mainframe walls for long-term durability• Laser-cut depth gauges for precise row unit depth gauging• Wider depth-gauging coulter mountings for added strength and stability• Triple-bar center frame support for greater reliability
Like all Great Plains equipment, the LC40 and LC25 are designed to provide precise, reliable performance in building, maintaining, and/or cultivating bedded ground.
LC40LC25
MO
DEL
S
LC25
Add a Great Plains Precision Seedbed Conditioner to your present finishing tool to prepare the perfect seedbed by firming the soil, reducing air pockets, incorporating chemicals, breaking up surface clods, knocking soil off root crowns, and preventing wind and water erosion in one pass. Create an unmatched seedbed that places the finer particles of soil in the planting zone, allowing perfect seed-to-soil contact to boost the emergence of your crop. All reel sections overlap for superior finish and no streaking. Wings flex up and down 15°, allowing the conditioner to follow the contour of the ground, providing flexibility like no other.
• Optional hydraulic weight transfer assures even weight on all sections in rolling terrain. • One hydraulic circuit controls lifting, folding, and weight transfer for ease of operation. • Hitch length adjusts to match the host machine for optimal turning radius. • Triple lip sealed bearing with 1-1/2"-round gang shafts on every section. • Heavy-duty design offers up to 150 pounds of weight per foot for increased clod and root ball breakage.
SINGLE HYDRAULIC CIRCUIT - This feature allows a simple and quick way to attach to the host machine.
HYDRAULIC WEIGHT TRANSFER - Transfer valve adjusts weight from center to wings, providing even, constant down pressure to the full width.
SPRING-CUSHIONED REELS - Provide maintenance-free pivot points.
16" DIAMETER REELS WITH 1" RODS - For higher strength and resistance to damage from stones.
2112SC, 2115SC, 2317SC,2320SC, 2322SC, 2325SC,2327SC, 2330SC, 2332SC,2335SC, 2536SC, 2538SC,2541SC, 2543SC, 2546SC,2548SC, 2551SC
Seedbed Conditioner 32 | 33
Features &Benefits
SeedbedPerfection
MO
DEL
S
21" TREADER WHEEL - 7" spacing is ideal for breaking clods, uprooting weeds, and preparing a seedbed. Hard-faced for long life.
HEAVY-DUTY ROLLING COULTER - Features a full 20" blade with a yoke-mounted, 4-bolt hub assembly.
48" SWEEPS - Narrower-than-standard V-Blades provide consistent depth in rolling conditions and clean better in “sticky” soils.
Time is short. Moisture is limited. You need a tillage system that enables you to cover hundreds of acres while carefully managing residue conditions. Our 3-, 5-, and 7-section Plains Plows are engineered to withstand the punishment of demanding field conditions while effectively managing surface residue.In addition, the Plains Plow
takes field efficiency to the next level when you select our optional hard pan ripper shanks. These optional shanks enable you to perform multiple field operations in a single pass…truly taking your productivity and fuel savings to the next level. Models 9533PP and 9540PP are available with optional 250-pound wing weights.
at its BEST!
4-1/2" SHALLOW PITCH BLADES - The standard shallow pitch 4-1/2"blades allow shallow tillage andfinishing with minimum ridging and lower horsepower requirements. This blade is recommended if higher tillage speeds and shallower tillagedepths are desired.
6-1/2" HIGH PITCH BLADES - The optional 6-1/2" blade offers additional lifting of the soil for greater weed kill along with more wearing surface to increase the life of the blade.
Features &Benefits
Undercutting
Sweep Selection
MO
DEL
S 9322PP, 9326PP,9533PP, 9540PP,9744PP, 9748PP,9752PP, 9756PP
Plains Plow 34 | 35
The Great Plains Heavy-Duty Flex Harrow is the toughest finishing harrow on the market! We use a triangle design with a full-length tongue, height-adjustable hitch, and doubled-up bridge frame for rigidity. The center frame is all 1/4" wall steel, making it perfect for nearly any terrain. The wings are constructed of 6" square tubing with reinforced corners. For longer life and wear, our 1-1/2" pivot pins are featured on the main pivot and wing corners. Extra-large cylinders with single valve control provide
lifting and folding power – even in heavy residue. Cable lift is automatic – no need to get off the tractor to adjust. The main hubs are 8-bolt, 4500# with 12.5Lx15 transport tires. Wing tires are non-puncture aircraft tires for longer stability and reliability. Available as a 16-, 12-, or 8-bar.
When looking for the ideal “clod busting” finishing tool, the Great Plains HD Flex Harrow is the perfect finisher. Its strength and simplicity are unmatched!
TRANSPORT TIRES – Extra heavy 8-bolt transport hubs and wheels. Six-bolt wing hubs and wheel with bolt in spindles for more tire stability and reliability.
TONGUE – Adjustable hitch heights. Tongue or clevis hitch help maintain level profile and optimal hitch height.
FORGE HARDENED – Six-inch spike teeth on 9" spacing for longer lasting wear.
FOLD HINGE – Super heavy, greaseable wing pivot joints and frame pivots for longer lasting wear at the 1-1/2" pivot pins.
Features &Benefits
SmoothFinish
FinishM
OD
ELS FH6424HD
FH6630HDFH6636HDFH6642HDFH6845HDFH6848HDFH6851HD
Flex Harrow 36 | 37
OurMission
As agricultural producers, we’re all aware of the increasing pressure to produce more with less. The demand for higher efficiency and increasing productivity on the farm has never been greater. At Great Plains, we listen closely to our customers. We work as a team, continually breaking new ground and innovating new products that position your operation to profit in a changing agricultural environment.
I would like to personally thank you for considering our broad line of Agricultural Products. We look forward to
putting our innovation to work in your operation.
Roy ApplequistOwner,Great Plains Mfg., Inc.
To Be a Company Where Innovation, Teamwork and a Desire to Improve Combine to:• Delight Our Customers• Provide a Rewarding Workplace for our Employees• Generate Profits for Stability and Growth
Great Plains Manufacturing was founded in 1976 by Roy Applequist and employs 1,600 people in eight Kansas communities and Sleaford, England. It encompasses five divisions: Great Plains Ag, which manufactures seedbed preparation, nutrient application, and seed placement equipment; Land Pride, which manufactures grounds maintenance tools such as mowers, rototillers, rotary cutters, and
dirt-working equipment; Great Plains International, which sells the company’s products worldwide; Great Plains Trucking, which operates a nationwide fleet of flatbed trucks; and Great Plains Acceptance Corporation, which finances the company’s products. Great Plains Mfg., Inc., is headquartered in Salina, Kansas, and is a family-owned business.
“Setting the pace through innovation.”
GREAT PLAINS
Corporate Info 38 | 39
Great Plains Manufacturing, Incorporated • 1525 E. North Street • P.O. Box 5060 • Salina, KS 67402-5060PHONE: 1-800-255-0132 • FAX: 785-822-5600 • www.greatplainsmfg.com
SALINA CAMPUSSALINA, KS
CORPORATE OFFICESALINA, KS
TRUCKING DIVISIONSALINA, KS
PRODUCT DEVELOPMENTSALINA, KS
LUCAS PLANTLUCAS, KS
KIPP PLANTKIPP, KS
ENTERPRISE PLANTENTERPRISE, KS
ABILENE PLANTABILENE, KS
SIMBA PLANTSLEAFORD, UK
TIPTON PLANTTIPTON, KS
ELLSWORTH PLANTELLSWORTH, KS
PRODUCT DEVELOPMENTASSARIA, KS
“Setting the pace through innovation.”
©GREAT PLAINS MFG., INC. 1423-GPM
GreatPlainsAg.comWhat can you do at Great Plains Ag?
FIND US ON
Great Plains Ag @Great Plains_Ag Great Plains Ag
Review agronomy principles
Locate a Great Plains dealer
Download Field Adjustment Guides
Look up parts for your product
Watch service videos
Read service tips
Watch product videos
Read customer reviews
Download Parts/Operator Manuals
View upcoming show schedule
Leave feedback
View company history
Career opportunities
View corporate information
Visit our finance page on greatplainsag.com to see our great financing options.
Great Plains reserves the right to vary specifications with or without notice at such times in such manner as deemed appropriate. Major as well as minor changes may be involved. Every effort, however, is made to ensure the accuracy of the particulars contained in this brochure. Consult your dealer for details regarding the specifications of any product. All sales are made by the Dis-tributor or Dealer subject to and with the benefit of the standard conditions of Sale and Warranty provided by the Distributor or Dealer, copies of which may be obtained upon request.