Tie-Off Points and AnchorsTie-Off Points and Anchors

Presented by Presented by

Scott Pipicelli – HC&AScott Pipicelli – HC&A

AES Raptor R1000AES Raptor R1000 Cost:Cost: $3,600.00 Est. (base model) $3,600.00 Est. (base model) Weight:Weight: 770 pounds (base model) 770 pounds (base model) Warranty:Warranty: Manufacturer’s defects one year from date of purchase. Manufacturer’s defects one year from date of purchase. Job Box: Job Box: 16 Cubic Feet16 Cubic Feet Tires: Tires: Flat free solid rubberFlat free solid rubber Fall Arrest Capacity: Fall Arrest Capacity: 2 employees2 employees Fall Protection: Fall Protection: The cart utilizes a cantilever and hook that will grab into the roof system once it The cart utilizes a cantilever and hook that will grab into the roof system once it

is engaged by a fall. Cart is not to be set closer than 12 feet to the leading edge.is engaged by a fall. Cart is not to be set closer than 12 feet to the leading edge. Parapet Wall: Parapet Wall: Can be used for walls up to 42 inches.Can be used for walls up to 42 inches. Approved Substrates: Approved Substrates: BUR, TPO, EPDM, Ballasted EPDM, Modified Bitumen, Modifided PVC, BUR, TPO, EPDM, Ballasted EPDM, Modified Bitumen, Modifided PVC,

Metal Decks (only 20 ga. and 22 ga), Dens Deck, Hardboard, Plywood, Lightweight Concrete, Metal Decks (only 20 ga. and 22 ga), Dens Deck, Hardboard, Plywood, Lightweight Concrete, Gypsum, ISO, EPS, Flat Surfaces to .5/12 (can be used on 1/12 with optional breaking system).Gypsum, ISO, EPS, Flat Surfaces to .5/12 (can be used on 1/12 with optional breaking system).

DO NOT USE ON: DO NOT USE ON: Tectum, Metal decks less than 22ga. OR over 20ga. (structural deck), loose Tectum, Metal decks less than 22ga. OR over 20ga. (structural deck), loose laid material not part of a complete finished system, Ice or Snow.laid material not part of a complete finished system, Ice or Snow.

OptionsOptions -Raptor Alert Fall Warning-Raptor Alert Fall Warning -Fall Restraint Tie-off Rings-Fall Restraint Tie-off Rings -Fall Retrieval System-Fall Retrieval System -Duel Front Break Assembly-Duel Front Break Assembly

PR 600PR 600 Cost: $Cost: $1,725.00 Est.1,725.00 Est. Weight: Weight: Complete weight is unknown, but it requires 500 pounds of ballast weight.Complete weight is unknown, but it requires 500 pounds of ballast weight. Warranty: Warranty: Lifetime for manufacturer defects only.Lifetime for manufacturer defects only. Tires: Tires: Inflatable tires that are located on existing cart. The pivot tire of the cart is made of solid Inflatable tires that are located on existing cart. The pivot tire of the cart is made of solid

plastic, and with the weight basket full, it will create grooves in certain insulations.plastic, and with the weight basket full, it will create grooves in certain insulations. Fall Arrest: Fall Arrest: Two EmployeesTwo Employees Fall Protection: Fall Protection: The cart utilizes a minimum of 500 pounds of ballast weightThe cart utilizes a minimum of 500 pounds of ballast weight and a pivot plate and a pivot plate

that will drive into the roof in the event of a fall.that will drive into the roof in the event of a fall. Parapet Wall: Parapet Wall: Can be used for walls up to 30 inches.Can be used for walls up to 30 inches. Approved Substrates: Approved Substrates: Wood decks, Bur, TPO, EPDM, and Modified PVC. The pivot point Wood decks, Bur, TPO, EPDM, and Modified PVC. The pivot point

should rest just above the roof, no more than two inches. should rest just above the roof, no more than two inches. --Metal decks require the pivot plates to be set into the flutes or fastened to the top with provided Metal decks require the pivot plates to be set into the flutes or fastened to the top with provided

four wedge anchors.four wedge anchors. -Wood Deck requires that the pivot point depress into the wood.-Wood Deck requires that the pivot point depress into the wood. -Concrete decks require that the pivot arm be secured with 4 provided wedge anchors.-Concrete decks require that the pivot arm be secured with 4 provided wedge anchors. DO NOT USE ON:DO NOT USE ON: Tectum, Gypsum, or Loose laid material Tectum, Gypsum, or Loose laid material Additional Information:Additional Information: PR600 requires an additional cart. PR600 requires an additional cart. -Assembly required-Assembly required -Very specific on setup guideline-please refer to owner’s manual.-Very specific on setup guideline-please refer to owner’s manual.

Eagle Panther IIIEagle Panther III Cost: Cost: $3,995.00 Est.$3,995.00 Est. Weight: Weight: 700 Pounds plus water700 Pounds plus water Warranty: Warranty: One year on Manufacturer DefectsOne year on Manufacturer Defects Job Box: Job Box: 20 Cubic Feet20 Cubic Feet Tires:Tires: Inflatable Inflatable Fall Arrest: Fall Arrest: Normally 2 employees. 3 employees in specific situations. Normally 2 employees. 3 employees in specific situations. Fall Protection: Fall Protection: The cart utilizes a cantilever and double spike to grab into the roof The cart utilizes a cantilever and double spike to grab into the roof

surface. surface. For tying off three employees (certain roof systems only) an addition ballast For tying off three employees (certain roof systems only) an addition ballast water tank must be filledwater tank must be filled. Water would weigh 500 pounds and has a drain hole.. Water would weigh 500 pounds and has a drain hole.

Parapet Wall: Parapet Wall: 48 Inches. The cart must be at least 15 feet from the wall.48 Inches. The cart must be at least 15 feet from the wall. Approved Substrates: Approved Substrates: Two Employees: BUR, TPO, EPDM, Ballasted EPDM, Modified Bitumen, Modified Two Employees: BUR, TPO, EPDM, Ballasted EPDM, Modified Bitumen, Modified

PVC, Metal Decks 22 ga. Dens Deck, Hardboard, Plywood, Lightweight Concrete, PVC, Metal Decks 22 ga. Dens Deck, Hardboard, Plywood, Lightweight Concrete, Gypsum.Gypsum.

Three EmployeesThree Employees: Concrete pads with fiber board, plus 4 plus BUR and Foam cover.: Concrete pads with fiber board, plus 4 plus BUR and Foam cover. DO NOT USE ON: DO NOT USE ON: Tectum or Metal decks of less than 22ga.Tectum or Metal decks of less than 22ga. Additional Information: Additional Information: During testing the cart moved between 5-9 inches on certain During testing the cart moved between 5-9 inches on certain

surfaces before arrest.surfaces before arrest.

Are these instructions legible?

SOLUTION – Three Ring Binder of Manufactures Instructions

Includes anchors, SRL’s, HLL’s, and Fall Carts

Ridge AnchorsRidge Anchors Requires 16d penny nails Requires 16d penny nails

in 6 center holes and 4 in 6 center holes and 4 corner holes – on both corner holes – on both sides (20 nails total)sides (20 nails total)

Install 6 feet from edges, Install 6 feet from edges, and then every 8 feet and then every 8 feet across the ridgeacross the ridge

Total working range of 30 Total working range of 30 degrees from the centerdegrees from the center

One Time Use AnchorsOne Time Use Anchors Anchor is designed to be Anchor is designed to be

installed in the peak of the installed in the peak of the roofroof

Anchor must be installed Anchor must be installed over the sheating and into over the sheating and into a roof trussa roof truss

Use nails provided with the Use nails provided with the anchor, filling every hole.anchor, filling every hole.

Anchor and nail must be Anchor and nail must be discarded after one-time discarded after one-time use.use.

Removable Roof AnchorsRemovable Roof Anchors

Must go into roof sheathing and into wood Must go into roof sheathing and into wood truss (anything less than plywood requires truss (anything less than plywood requires lumber backing)lumber backing)

¼” x 3 ½” screws down the center and ¼” ¼” x 3 ½” screws down the center and ¼” x 1 ½” screws in the 4 cornersx 1 ½” screws in the 4 corners

How do you inspect this anchor before use?