three-phase induction motor · weg motors are tested according to nbr 5383, ... phone: +49 5681...
TRANSCRIPT
W60 Three-Phase Induction Motor
Motors | Automation | Energy | Transmission & Distribution | Coatings
www.weg.net
W60 - Three-Phase Induction Motor
WEG W60 motor line is designed for industrial applications such as compressors, pumps, fans and others, ensuring high performance and reliability even under the most severe operating conditions.
Flexibility is the KeyW60 motors are avaliable on three different configurations allowing it to be designed as on open, self-ventilated (IC01, WP-II) motor, or an enclosed, air-air cooled (IC611, TEAAC) or air-water cooled (IC81W, TEWAC) motor.
Compact DesignWith its compact design, lightweight components, reduced dimensions and footprint that saves valuable space on the skid or base where the motor is installed, the W60 is the most compact modular motor in the market.
Severe Duty is Standard for W60A rugged motor made with high quality cast iron frame and end shields fitted with antifriction bearings up to 560 IEC frame guarantees the lowest vibration and noise levels.On larger frames, the same results is achieved by means of a dedicated steel fabricated frame, associated with carefully selected sleeve bearings.
Outstanding in the MarketWEG engineers have developed a unique product that combines the latest technology of high quality rotor and stator lamination, low losses fans and optimized heat exchanger, increasing considerably the power density rate (output per weight). This combination makes the W60 your best choice for an energy efficient motor.
Reliability Where you Need ItDesigned to operate continuously without interruption, the W60 was conceived with unique characteristics: easy to build, easy to assemble, easy to install.
VFD FriendlyThe W60 adapts easily to any medium voltage VFD in the market. Suitable to operate with no speed limitation up to rated speed by standard design. An optimized insulation is available when combined with WEG medium voltage variable frequency drive.
W60 - Motor de Indução Trifásico2
www.weg.net
W60 - Three-Phase Induction Motor 3
Standard FeaturesProduct Scope
J Rated output: 500 up to 16,000 kW J Number of poles: 2 up to 12 J Frame sizes: IEC 450 up to 1000 J Voltage: 2,300 up to 13,800 V J Frequency: 50 or 60 Hz J Mounting: Horizontal J Cooling method: IC01, IC611, IC81W J Degree of protection: IP24W up to IP55 J Starting: DOL or VFD
Optional Features J Safe Area Certification:
J cCSAus J cULus
J Hazardous area certification: J ATEX / IECEx / INMETRO / UL certified:
J Ex nA IIC T3 Gc (non-sparking) J Ex tc IIIB T125 °C Dc (dust-ignition) J Ex tb IIIC T125 °C Db (dust-ignition)
J cCSAus certified: J Class I, Division 2, Groups B, C and D, J Class II, Division 2, Groups F and G, T
J Cooling method: IC06, IC86W, IC616 and IC666 J Degree of protection: IP56 and IP65 J Air filters J Differential pressure switch (air cooled) J Water leakage detector (water cooled) J Thermometers J Encoder (VFD operation) J Surge protection (lightning arrestors and capacitors) J Vibration sensors (acceleration, velocity and displacement) J Several others available upon request
Certifications
J RTD Pt-100, two per phase J RTD Pt-100, one per bearing J Space heater J Copper bars rotor J Global VPI Insulation System
www.weg.net
W60 - Three-Phase Induction Motor4
Design Details
Cooling System J Symmetric cooling J Increased air flow J Low losses fans J Easy assembly J Mechanically strong
Electrical Core J High quality lamination J Energy efficient J Increased power density ratio
With an optimized concept for heat exchanging and magneticflow, the W60 allows several different configurations that suitsall sort of applications, from self-cooled to forced ventilation.
Ele
ctri
cal P
erfo
rman
ceB
eari
ngs
Ball bearings are standard up to 560 frame even on 2 polemotors. Its compact design allows utilization of antifriction ballbearings, grease lubricated, where other motors cannot.
Sleeve bearings are standard for larger 2 and 4 poles motorsand are available when required for the entire range.
www.weg.net
W60 - Three-Phase Induction Motor 5
Mec
hani
cal F
eatu
res
Co
mp
act
and
Ro
bus
t
Vibration Level J Reduced vibration levels J Both DOL and VFD operation
Frame J Rugged design J Compact and lighter J Smallest footprint area
Noise Suppressors J Carefully designed system J Superior noise cancelling J Simplified assembly J Easy maintenance
End Shields J Reinforced structure J High quality cast iron
Designed using the most advanced software the W60 framedesign provides a solid structure that allows operation in themost severe environments, suitable for high impact and speedapplications, while providing a smooth operation, with lowvibration and noise levels.
With the shortest frame available in the market, the W60 requires the smallest footprint installation area. Total enclosure volume may exceed 50% reduction when compared to similar motors available in the market.
www.weg.net
W60 - Three-Phase Induction Motor6
Test Laboratory
Applied Tests
WEG motors are tested according to NBR 5383, IEC 60034, NEMA MG 1 and API in modern laboratories. Capable of testing low and high voltage motors with power up to 20,000 kVA and voltages up to 15,000 V, WEG laboratories feature highly accurate controls and fully computerized test monitoring systems.The tests are divided into three categories: routine, type and special tests. Routine tests are performed in all motors.In addition to routine tests, type and special tests are usually performed in one of a series of the same motors or under the customer’s request.
Test laboratory
Surge test Control room
Routine Tests J Cold ohmic resistance measurement J No load test J Blocked-rotor test J Applied potential test J Measurement of insulation resistance
Type Tests J All routine tests J Measurement of maximum torque J Temperature rise test J Test under load with constant voltage
Special Tests J Noise level measurement J Shaft voltage measurement J Overspeed test J Vibration test
www.weg.net
W60 - Three-Phase Induction Motor 7
Technical Assistance
Services
WEG technical team provides the customers with full after sale support. The services include consulting in general and services in the field, such as diagnosis, commissioning of machines and 24x7 support.The technical assistance team is highly qualified and experienced, able to handle many different situations in the field and to give remote support, using state-of-the-art equipment, which ensures reliable results.WEG also provides its network of authorized repair shops, present in Brazil and worldwide.
In order to restore medium and large electrical machines, count on WEG service team.The same technology used to manufacture motors and generators is used for inspection and restoration. The services are executed in the field (at the customer’s premises) or at factory of São Bernardo do Campo Unit (Brazil), which is also homologated to execute services on equipment for use in explosive atmospheres. This plant count on the full structure and support of the engineering, industrial process and quality control departments, enabling fast, reliable and quality service.
Service of WEG products and other brands: J DC generators and motors J Three-phase induction motors (squirrel cage or slip ring; medium and high voltage)
J Synchronous motors (with or without brushes; medium and high voltage) J Synchronous condensers J Turbogenerators J Hydrogenerators
WEG Services: Flexibility, agility and experience to optimize your time and productivity.
Cod
: 50
0439
82 |
Rev
: 03
| Dat
e (m
/y):
05/2
017
The
valu
es s
how
n ar
e su
bje
ct to
cha
nge
with
out p
rior
notic
e.
For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
WEG Worldwide Operations
ARGENTINASan Francisco - CordobaPhone: +54 3564 [email protected]
Cordoba - CordobaPhone: +54 351 [email protected]
Buenos AiresPhone: +54 11 [email protected]
AUSTRALIAScoresby - Victoria Phone: +61 3 [email protected]
AUSTRIAMarkt Piesting - Wiener Neustadt-LandPhone: +43 2633 [email protected]
BELGIUMNivelles - BelgiumPhone: +32 67 [email protected]
BRAZILJaraguá do Sul - Santa CatarinaPhone: +55 47 [email protected]
CHILELa Reina - SantiagoPhone: +56 2 [email protected]
CHINANantong - JiangsuPhone: +86 513 [email protected]
Changzhou – Jiangsu Phone: +86 519 [email protected]
COLOMBIASan Cayetano - BogotaPhone: +57 1 [email protected]
ECUADOREl Batan - QuitoPhone: +593 2 [email protected]
FRANCESaint-Quentin-Fallavier - IsèrePhone: +33 4 [email protected]
GERMANYTürnich - Kerpen Phone: +49 2237 [email protected]
Balingen - Baden-WürttembergPhone: +49 7433 [email protected]
Homberg (Efze) - HessePhone: +49 5681 [email protected]
GHANAAccraPhone: +233 30 [email protected]
INDIABangalore - KarnatakaPhone: +91 80 [email protected]
Hosur - Tamil NaduPhone: +91 4344 [email protected]
ITALYCinisello Balsamo - MilanoPhone: +39 2 [email protected]
JAPANYokohama - KanagawaPhone: +81 45 [email protected]
MALAYSIAShah Alam - SelangorPhone: +60 3 [email protected]
MEXICOHuehuetoca - MexicoPhone: +52 55 [email protected]
Tizayuca - HidalgoPhone: +52 77 97963790
NETHERLANDSOldenzaal - OverijsselPhone: +31 541 [email protected]
PERULa Victoria - LimaPhone: +51 1 [email protected]
PORTUGALMaia - PortoPhone: +351 22 [email protected]
RUSSIA and CISSaint PetersburgPhone: +7 812 363 [email protected]
SOUTH AFRICAJohannesburgPhone: +27 11 [email protected]
SPAINCoslada - MadridPhone: +34 91 [email protected]
SINGAPORESingaporePhone: +65 [email protected]
SingaporePhone: +65 [email protected]
SCANDINAVIAMölnlycke - SwedenPhone: +46 31 [email protected]
UKRedditch - WorcestershirePhone: +44 1527 [email protected]
UNITED ARAB EMIRATESJebel Ali - DubaiPhone: +971 4 [email protected]
USADuluth - GeorgiaPhone: +1 678 [email protected]
Minneapolis - MinnesotaPhone: +1 612 3788000
VENEZUELAValencia - CaraboboPhone: +58 241 [email protected]
WEG Group - Energy Business Unit Jaraguá do Sul - SC - Brazil Phone: +55 47 3276 4000 [email protected] www.weg.net