thomas product overview 20191007 - online version
TRANSCRIPT
OverviewProduct
CONNECTING INNOVATION
WWW.THOMASPIPEPRODUCTS.COM
TEL: +27 21 556 5258
JOHANNESBURG
CAPE TOWNOF PIPE CONNECTION, REPAIR AND
FLOW CONTROL SOLUTIONS
DESIGNER, MANUFACTURER AND DISTRIBUTOR
NOV 2019
PIPE PRODUCTS
THOMASDesigner - Manufacturer - Distributor
Pipe Repairs
Pipe Fittings
Bellows & Strainers
Tap In Products
Technical Data
Couplings & Flange Adaptors
Restrained Products
Couplings & Flange Adaptors
Dism. Joint & Rest. FA EvoGrip
G-Flex Gripper PolyGrip
Flanged FlexibilityDismantling Joints & Restrained Flange Adaptors are designed to provide greater versatility for the designer at the planning stage and the contractor at the installation stage of flanged pipe work systems. Dismantling Joints allow for simpler valve and pump maintenance in chambers.
Allows for AdjustmentDismantling Joints are double flanged fittings that accommodate 50mm (2”) axial adjustment. For applications where a full-face flange is required, such as wafer and butterfly valves, the full-face of the spigot flange provides a full flange sealing area. Once positioned at the required length the product is locked into position with the tie rods supplied. Thereby creating a restrained connection.
The RangeDN40 - 3000mm any flange drilling up to PN64.
ApplicationEvoGrip Couplings are designed to provide fully restrained joints for HDPE pipework. The coupling is suitable up to and including a working pressure of 16 bar (1600 kPa).
Cost EffectiveThe EvoGrip is: - light weight & cost effective - corrosion resistant - extremely simple to install.
The EvoGrip can be used on site immediately, eliminating the planning, cost and need for Butt Welding machines for the connection of HDPE pipe. Replacing TAK Clamps and Stub & Flange connections for HDPE pipe.
The RangeEvoGrip Couplings are available for 110mm & 160mm HDPE.
ApplicationG-Flex Gripper Couplings are designed to provide fully restrained joints for metallic pipework. The coupling is suitable for working pressures from 12 to 30 bar depending on the nominal size. With its corrosion resistant stainless steel construction and full end load restraining performance, the G-Flex Gripper is ideal for the marine industry.
AdvantagesThe G-Flex Gripper replaces: - welding; flanging; threading & grooving.
The coupling is ready to use and fitted in a matter of minutes without heavy equipment and long setup t imes. Manufactured from Stainless Steel with rubber seals suitable for potable water or chemicals such as various oils.
The RangeG-Flex Gripper couplings are available for steel pipe from DN20 - 350mm.
ApplicationThe PolyGrip Range was designed as a simple, high performance end load restraint mechanical method of joining PVC and HDPE pipe. Designed to support and grip the pipe, preventing pipe collapse and pipe end pullout. The coupling is suitable for working pressure up to 16 bar (1600 kPa).
AdvantagesThe PolyGrip Range includes the following: - Couplings -Flange Adaptors - Fittings - Harnesses
Ready and simple to use. PolyGrip products can be installed under wet conditions without shelters, and even under water. It is ideal for on-the-spot repairs, no need for fusion jointing equipment when unexpected problems arise.
The RangePolyGrip products are available from 90 - 315mm PVC and HDPE pipe outside diameters.
1
Applications: Gas ProductsWater Products Industrial Applications
Non Restrained Products
Couplings & Flange Adaptors
2
DediFit Couplings
Dedicated Couplings for PVC/Steel PipeDediFit Couplings are designed specifically for quick and simple installation on PVC and/or steel pipe. The limited & dedicated operating range ensures the couplings are tightened with only several turns of the nut.
The RangeDediFit Couplings are supplied in Red Oxide Primer or Fusion Bonded Epoxy corrosion protection. Sizes available include: PVC 63 / 90 / 110 / 160 / 200 / 250 / 315 / 355 / 400mm.
STEEL 88.9 / 114.3 / 165-168 / 219 / 273 / 324 / 356 / 406mm.
All couplings are suitable for a 16 Bar Working Pressure.
Designed for FlexibilityDesigned to allow several degrees of pipeline angular deflection, Thomas Large Diameter Couplings & Adaptor Products are ideal for accommodating misaligned pipes. Simplifying the task of the design engineer & contractor.
Design CapabilityWith input from customers, products can be designed specifically to suit certain applications. Longer barrels, higher pressures, different coatings, special steels and specialized rubber compounds are some of the non-standard components added at design stage.
The RangeA comprehensive range is available from DN700 - 3000mm. Stepped couplings join pipes of different external diameters and flange adaptors can be supplied with flanges drilled to
any national or international standard, or to a customers own detailed specification with pressure ratings up to 64bar
Dedicated Large Diameter
Unifit Series
Universal Wide Range Couplings & AdaptorsThomas Unifit universal pipe couplings are designed to accommodate plain ended pipes with different outside
diameters. One fitting is able to connect a wide variety of
pipe materials including steel, ductile iron, PVC, cast iron,
GRP and asbestos cement pipes, amongst others. The range is designed and manufactured under a strict quality management system and the products meet the requirements of SANS 1808-2 of the South Africa Bureau of Standards. All products in the range have a test pressure of
24bar on water (9bar on gas) and are suitable for 16bar
working pressure for water (6bar on gas). Higher pressures up to 64bar are available on request.
3
SpecialsLonger barrels, higher pressures, different coatings, special stainless steels and specialized rubber compounds are some of the non-standard components available. We are able to design and manufacture special couplings according to customer requirements.
Extensive RangeAn extensive range from DN15 mm - DN600mm exists for: - Couplings & Long Barrel Couplings - Universal Drilling & Steel Flange Adaptors - Step Couplings - End Caps and End Plugs.
For joining plain ended pipes of similar or dissimilar materials, UNIFIT Universal Couplings have wide sealing tolerances ensuring all popular pipe materials can be connected. From DN40 - 600mm. Larger d iameter wide range couplings can be manufactured.
UNIFIT Long Barrel Couplings are designed specif ical ly for the connection of GRP & HDPE pipe. Barrel lengths are specified to cater for HDPE expansion & contraction upon installation. They can be used to span large gaps between pipe ends.
UNIFIT Step Couplings are used for connecting pipes of different nominal bore and different pipe material. From DN40 - 600mm. Restraining cleats and harnesses can be provided to prevent step couplings moving. Double bolt sets are available for GRP connections.
HALF COUPLINGS are supplied for welding to mild steel fittings from DN40 - 600mm. Enabling socketed fittings to be manufactured for all rigid pipe materials catering for pressure ratings up to and including PN64.
For jo in ing f langed p ipe l ine components to plain ended pipes, UNIFIT Universal Flange Adapters have wide sealing tolerances and a universal flange drilling to suit T1000/3 & T1600/3. In some cases the adaptors also accommodate BS10 T/D. From DN40 - 600mm.
UNIFIT Steel Flange Adaptors are available in any flange drilling from PN6 to PN64 and any nominal bore from DN40 - 600mm. Restrained Flange Adapters are also available.
UNIFIT External Test Caps are suitable for all rigid pipe materials. Sockets for pipe testing can be added as required. Sizes from DN40 - 600mm. Internal test plugs can be manufactured.
S P E C I A L S a r e a v a i l a b l e . Customers can specify special materials for bolts, rubbers seals, sleeve and end rings. Higher pressure ratings are available up to 64bar. Special corrosion protection coatings and dimensions can be made to order for all products.
Large Diameter ProductsAll couplings and adaptors are available as Dedicated Large Diameter products. From DN700 - DN3000mm. Including the following: Couplings, Step Couplings, Long Barrel Couplings,
Flange Adaptors, Restrained Flange Adaptors, Dismantling Joints, End Caps, etc.
MIN
MA
X
TC
4048
58
TC
5059
73
TC
50-2
5978
TC
6572
85
TC
65-2
7490
TC
8088
103
TC
100
9811
8
TC
100-
210
812
8
TC
125
132
154
TC
150
150
170
TC
150-
215
918
2
TC
150-
318
019
4
TC
175
192
209
TC
175-
220
522
2
TC
200
218
235
TC
225
235
252
TC
225-
225
026
7
TC
225-
326
027
4
TC
250
271
289
TC
250-
228
630
4
TC
300
302
318
TC
300-
231
533
2
TC
300-
333
435
0
TC
350
344
360
TC
350-
235
637
2
TC
350-
337
439
1
TC
400
391
407
TC
400-
240
141
7
TC
400-
341
743
7
TC
400-
443
044
6
TC
450
444
460
TC
450-
245
847
4
TC
450-
347
749
3
TC
500
494
510
TC
500-
250
952
3
TC
500-
351
853
4
TC
500-
452
654
6
TC
500-
555
657
2
TC
500-
657
759
3
TC
600
604
614
TC
600-
261
162
4
TC
600-
362
764
3
CODE
CO
UP
LIN
GR
AN
GE
(mm
)
PIP
E O
D v
s T
HO
MA
S C
OU
PL
ING
CO
DE
4
61
21
82
43
03
66
10
16
20
40
48
.3T
C4
0
50
60
.3T
C5
0
50
TC
40
69
TC
50
65
76
.1T
C6
5
63
TC
50
82
TC
65
75
98
TC
80
75
TC
65
96
TC
80
80
88
.9T
C6
5-2
90
TC
65
-2
10
011
4.3
TC
10
0
118
TC
10
0-2
110
TC
10
0
12
2T
C1
00
-2
12
51
39
.7T
C1
25
12
5T
C1
00
-2
15
0T
C1
25
14
01
40
TC
12
5
15
01
65
.1T
C1
50
17
0T
C1
50
-2
16
0T
C1
50
17
7T
C1
50
-2
16
8T
C1
50
-2
17
4T
C1
50
-2
18
0T
C1
50
-3
18
8T
C1
50
-3
19
6T
C1
75
17
51
93
.7T
C1
50
-3
20
5T
C1
75
20
02
19
.1T
C1
75
-2
22
2T
C1
75
-2
20
0T
C1
75
23
2T
C2
00
22
2T
C2
00
22
9T
C2
00
23
9T
C2
25
25
0T
C2
25
-2
26
2T
C2
25
-2
22
52
44
TC
22
5
25
9T
C2
25
-2
25
02
73
TC
22
5-3
27
4T
C2
25
-3
25
0T
C2
25
28
6T
C2
50
27
4T
C2
50
28
4T
C2
50
29
5T
C2
50
-2
30
4T
C3
00
31
8T
C3
00
-2
25
8T
C2
25
-2
25
8T
C2
25
-2
26
0T
C2
25
-2
26
2T
C2
25
-2
30
03
24
TC
30
0-2
32
6T
C3
00
-2
31
5T
C3
00
34
5T
C3
00
-3
32
8T
C3
00
-2
34
0T
C3
00
-3
35
3T
C3
50
36
5T
C3
50
-2
37
8T
C3
50
-3
30
9T
C3
00
30
9T
C3
00
311
TC
30
0
31
4T
C3
00
32
7T
C3
00
-2
35
03
56
TC
35
0
37
8T
C3
50
-3
35
5T
C3
50
42
6T
C4
00
-3
37
8T
C3
50
-3
38
2T
C3
50
-3
39
6T
C4
00
41
2T
C4
00
-2
42
6T
C4
00
-3
44
0T
C4
00
-4
35
9T
C3
50
-2
36
0T
C3
50
-2
36
3T
C3
50
-2
36
5T
C3
50
-2
37
9T
C3
50
-3
40
04
06
TC
40
0
42
9T
C4
00
-3
40
0T
C4
00
45
3T
C4
50
43
0T
C4
00
-3
43
6T
C4
00
-4
45
0T
C4
50
46
8T
C4
50
-2
48
4T
C4
50
-3
50
3T
C5
00
40
9T
C4
00
-2
41
0T
C4
00
-2
41
4T
C4
00
-2
41
7T
C4
00
-2
41
3T
C4
00
-2
45
04
57
TC
45
0
48
0T
C4
50
-3
45
0T
C4
50
50
7T
C5
00
48
3T
C4
50
-3
48
8T
C4
50
-3
50
6T
C5
00
52
4T
C5
00
-3
54
5T
C5
00
-4
56
6T
C5
00
-5
45
9T
C4
50
46
2T
C4
50
-2
46
6T
C4
50
-2
47
0T
C4
50
-2
46
4T
C4
50
-2
50
05
08
TC
50
0
53
2T
C5
00
-3
50
0T
C5
00
56
0T
C5
00
-5
53
5T
C5
00
-4
54
3T
C5
00
-4
56
0T
C5
00
-5
58
3T
C5
00
-6
60
6T
C6
00
62
9T
C6
00
-3
51
0T
C5
00
-2
511
TC
50
0-2
51
7T
C5
00
-2
52
1T
C5
00
-2
51
5T
C5
00
-2
52
55
87
TC
50
0-6
55
05
59
TC
50
0-5
61
4T
C6
00
-2
56
1T
C5
00
-5
56
3T
C5
00
-5
56
9T
C5
00
-5
57
3T
C5
00
-5
60
06
10
TC
60
0
63
5T
C6
00
-3
63
0T
C6
40
ID
66
7T
C6
77
ID
63
8T
C6
00
-3
65
1T
C6
61
ID
67
2T
C6
82
ID
69
9T
C7
09
ID
72
7T
C7
35
ID
75
5T
C7
63
ID
61
2T
C6
00
-2
61
4T
C6
00
-2
62
0T
C6
00
-2
62
4T
C6
00
-2
61
7T
C6
00
-2
VE
CT
US
CL
AS
S
CO
DC
ID C
LA
SS
NB
STEEL
DI
PVC / HDPE
AC
- A
SB
ES
TO
S C
EM
EN
T P
IPE
FC
- F
IBR
E C
EM
EN
T P
IPE
GR
P
FLOWTITE
Non Restrained Products
Couplings & Flange Adaptors
5
Dedicated Couplings for AC/FC PipeDediFit Couplings are designed specifically for quick and simple installation on PVC and/or steel pipe. The limited & dedicated operating range ensures the couplings are tightened with only several turns of the nut.
The RangeDediFit Couplings are supplied in Red Oxide Primer or Fusion Bonded Epoxy corrosion protection. Sizes available include: PVC 63 / 90 / 110 / 160 / 200 / 250 / 315 / 355 / 400mm.
STEEL 88.9 / 114.3 / 165-168 / 219 / 273 / 324 / 356 / 406mm.
All couplings are suitable for a 16 Bar Working Pressure.
Designed for FlexibilityThomas Large Diameter Couplings & Adaptor Products are designed to allow several degrees of pipeline angular deflection. Ideal for accommodating misaligned pipes. Simplifying the task of the design engineer & contractor.
Design CapabilityWith input from customers, products can be designed specifically to suit certain applications. Longer barrels, higher pressures, different coatings, special steels and specialized rubber compounds are some of the non-standard components added at design stage.
The RangeA comprehensive range is available from DN700 - 3000mm. Stepped couplings join pipes of different external diameters and flange adaptors can be supplied with flanges drilled to
any national or international standard, or to a customers own detailed specification with pressure ratings up to 64bar
Short Collar CouplingsJunior Couplings
FlexibilityG-Flex Install Couplings are high performance couplings allowing pipe angular deflection, expansion and contraction.
Superior DesignG-Flex Couplings are manufactured completely from stainless steel offering superior corrosion protection. The entire internal surface of the coupling is rubber lined, enabling these products to be used for harsh pipeline contents. EPDM, NBR or specialized rubber compounds are available.
G-Flex Couplings utilize a ‘self-energizing’ rubber seal. As the pressure increases, the lip seals are pressed more tightly against the pipe surface. This makes the G-Flex the best possible means of connecting GRP pipe.
The RangeG-Flex couplings are available in Stainless Steel or FBE coated mild steel from DN20 - 3000mm for virtually any pipe material.
ApplicationLP Couplings are dedicated couplings designed as simple, cost effective methods of joining large diameter Structured Wall Pipes (SWP) such as: - Starway Pipe - Weholite Pipe
Offering excellent corrosion resistance with full stainless steel construction.
Starway Couplings are designed for Starway SWP only.
The Weholite LP Coupling is designed for joining Weholite SWP. However, the Weholite LP Coupling can be used on any pipe material of gravity fed pipelines not exceeding 1 bar (100kPa), such as Concrete.
The RangeStarway Couplings from DN200 - 2200mm. Weholite LP Couplings from DN280 - 3000mm.
G-Flex Install Low Pressure Coupling
Tap In Products
Under Pressure Drill
DI Saddle for PVC Pipe Buffalo Saddle
Easi Tee
ApplicationDuctile Iron Saddles for PVC pipe are dedicated saddles specific to PVC pipe. A dedicated range is available for pipes from OD63 - 200mm with branch outlet sizes of DN25mm or DN50mm female screwed BSP sockets.
Design AdvantagesThe saddle head includes a moulded rubber seal that extends below and up into the saddle outlet. The castings are drilled & tapped eliminating loose nuts and washers.
Tap In FlexibilityBuffalo Saddles are designed to offer the installer a universal saddle that will accommodate almost all rigid pipes diameters of a single nominal bore.
Allows for AdjustmentThe Buffalo Saddle utilizes a stainless steel strap band that is tightened via fasteners on each side of the saddle head. The length of the fastener enables the strap band to be assembled around pipes of up to 20mm diameter variance. Single strap and double strap saddle heads are available with BSP screwed outlets from DN20 - 100mm or flanged outlets from DN50 - 100mm.
In conjunction with our Under Pressure Drilling kit, Buffalo Saddles and Easi Tees enable quick, economic and trusted Tap In solutions.
The RangeFor pipes from DN50 - 600mm with branch outlet sizes from DN20 - 100mm.
ApplicationUnder pressure drilling is the precise process of drilling a hole into a flowing pipe system without leaking its contents or interrupting flow. We design and manufacture tapping saddles and tees that can be tailor made to your individual requirements, you install them and tap into a live operational pipeline with an Under Pressure Drilling (UPD) kit.
If customers do not want to purchase a UPD, we have the facility to Tap In for our customers using our in house equipment.
Complete SolutionUnder Pressure Drill kits are sold neatly packed in a robust steel box ready for use.
The RangeUnder Pressure Drill Kits are available with cutting heads from DN15 - 150mm.
ApplicationStainless Steel full circle tap in saddles & tees.
Permanent Tap In ConnectionUltra Saddles and Tees are available in various clamp lengths (up to 600mm wide) and suitable for virtually any pipe material. Supplied complete with stainless steel armour plate vulcanized into the rubber seal at the time of moulding, offering a permanent tap in solution. Available for pipe sizes from DN40 - 600mm. Outlet size DN15 - 50mm.
ApplicationEasi Tees are robust bolt on Tee Pieces that can be installed on live pipelines. Available from DN40 - 600mm with outlets available up to DN300mm.
AdvantagesEasi Tees offer a secure, rigid, full circumferential seal around the pipe, supporting the pipe structurally.
6
Ultra Saddle & Tee
Pipe Repairs
Ultra Clamp
7
ApplicationThe Ultra Clamp Series is a comprehensive range of stainless steel pipe repair clamps for rigid pipe materials. They should not be used to join pipes.
Permanent RepairUltra Clamps are available in various clamp lengths from 150 to 1200mm wide. They are suitable for virtually any pipe material. Ultra Clamp products from DN40mm and greater are supplied as full circumferential repair clamps, complete with a stainless steel armour plate vulcanized into the rubber seal at the time of moulding. Ultra Clamps are constructed from 100% stainless steel and therefore offer a permanent repair for many types of pipe damage such as cracks, holes and corrosion pitting. Special sizes and widths, and fast manufacturing for urgent breakdowns are available on request .
The RangeDN15 - 1200mm.
Corrosion Holes
Impact Damage
Small Cracks
Should NOT be used for joining pipes
Easy to InstallRapid installation in poor site conditions, made easy with simple, ‘flip-over’ action and self retaining bolts.
Junior Repair ClampSnap Clamp
ApplicationThe Snap Clamp Series is a range of stainless steel pipe repair clamps for small diameter pipes. Snap Clamps should not be used to join pipes. As the Snap Clamp does not have a full circle seal around the entire pipe circumference, it is only suitable for repairing pin holes and localized damage.
Permanent RepairSnap Clamps are available in 75mm lengths and are constructed with a stainless steel outer shell and a gridded rubber lining. The tightening lugs are galvanized Ductile Iron and therefore offer a permanent repair for pipe damage such as holes and corrosion pitting.
The RangeDN15 - 50mm.
ApplicationThe Junior Repair Clamp Series is a range of stainless steel pipe repair clamps for small diameter pipes. They should not be used to join pipes but are suitable for repairing a full circumferential crack. The Junior Repair Clamp incorporates a gridded rubber lining with a stainless steel armour plate that prevents the rubber seal extruding out between the tightening lugs. This provides a full circle seal around the entire pipe circumference, it is therefore suitable for repairing pin holes, localized damage, pitting and circumferential cracks.
Permanent RepairJunior Repair Clamps are available in 75mm lengths. They are constructed with a stainless steel outer shell and a gridded rubber lining with a stainless steel armour plate. The tightening lugs are galvanized Ductile Iron and therefore offer a permanent repair for damaged pipe.
The RangeDN15 - 50mm.
PIP
E O
D v
s U
LT
RA
CL
AM
P C
OD
E
6
MIN
MAX
TUC1
-004
945
55
TUC1
-006
259
67
TUC1
-007
269
76
TUC1
-007
875
83
TUC1
-009
087
93
TUC1
-009
995
104
TUC1
-011
010
411
3
TUC1
-011
611
312
0
TUC1
-012
512
113
0
TUC1
-013
012
613
6
TUC1
-014
013
614
2
TUC1
-015
014
515
5
TUC1
-015
715
716
3
TUC1
-016
716
517
6
TUC1
-017
817
418
3
TUC1
-018
417
918
9
TUC1
-019
318
819
9
TUC1
-020
019
520
5
TUC1
-020
620
221
2
TUC1
-022
321
822
8
TUC1
-023
322
923
8
TUC1
-024
123
624
5
TUC1
-025
224
825
7
TUC1
-026
325
826
8
TUC1
-027
627
128
1
TUC1
-028
728
129
1
TUC1
-029
929
430
4
TUC1
-030
930
431
4
TUC1
-031
531
032
0
TUC1
-032
532
033
0
TUC1
-033
232
733
7
TUC1
-034
734
235
2
TUC1
-035
835
336
3
CODE
CLAM
PRA
NGE
(mm
)
8
612
1824
3036
610
1620
4048
.3TU
C1-
0049
5060
.3TU
C1-
0062
50TU
C1-
0049
69TU
C1-
0072
6576
.1TU
C1-
0078
63TU
C1-
0062
82TU
C1-
0078
7598
TUC
1-00
99
75TU
C1-
0072
96TU
C1-
0099
8088
.9TU
C1-
0090
90TU
C1-
0090
100
114.
3TU
C1-
0116
118
TUC
1-01
16
110
TUC
1-01
10
122
TUC
1-01
25
125
139.
7TU
C1-
0140
125
TUC
1-01
25
150
TUC
1-01
50
140
140
TUC
1-01
40
150
165.
1TU
C1-
0167
170
TUC
1-01
67
160
TUC
1-01
57
177
TUC
1-01
78
168
TUC
1-01
67
174
TUC
1-01
78
180
TUC
1-01
84
188
TUC
1-01
93
196
TUC
1-02
00
175
193.
7TU
C1-
0193
205
TUC
1-02
06
200
219.
1TU
C1-
0223
222
TUC
1-02
23
200
TUC
1-02
00
232
TUC
1-02
33
222
TUC
1-02
23
229
TUC
1-02
33
239
TUC
1-02
41
250
TUC
1-02
52
262
TUC
1-02
63
225
244
TUC
1-02
41
259
TUC
1-02
63
250
273
TUC
1-02
76
274
TUC
1-02
76
250
TUC
1-02
52
286
TUC
1-02
87
274
TUC
1-02
76
284
TUC
1-02
87
295
TUC
1-02
99
304
TUC
1-03
09
318
TUC
1-03
15
258
TUC
1-02
63
258
TUC
1-02
63
260
TUC
1-02
63
262
TUC
1-02
63
300
324
TUC
1-03
25
326
TUC
1-03
25
315
TUC
1-03
15
345
TUC
1-03
47
328
TUC
1-03
32
340
TUC
1-03
47
353
TUC
1-03
58
365
TUC
2-03
65
378
TUC
2-03
78
309
TUC
1-03
09
309
TUC
1-03
09
311
TUC
1-03
15
314
TUC
1-03
15
327
TUC
1-03
32
350
356
TUC
1-03
58
378
TUC
2-03
78
355
TUC
1-03
58
399
TUC
2-03
99
378
TUC
2-03
78
382
TUC
2-03
82
396
TUC
2-03
96
412
TUC
2-04
12
426
TUC
2-04
26
440
TUC
2-04
40
359
TUC
1-03
58
360
TUC
1-03
58
363
TUC
1-03
58
365
TUC
2-03
65
379
TUC
2-03
79
CO
DC
ID C
LAS
S
VE
CTU
S
CLA
SS
NB
STEEL
DI
PVC / HDPE
AC
- A
SB
ES
TOS
CE
ME
NT
PIP
E
FC -
FIB
RE
CE
ME
NT
PIP
E
GR
P
FLOWTITE
Bellows & Strainers
Y Strainers
ApplicationRubber Expansion Joints (Bellows) are commonly used to absorb vibration, compensate for pipeline movement, reduce system noise and compensate for pipeline component misalignment. Additionally, rubber bellows limit electrolysis and counter expansion & contraction against start up and shutdown surge forces.
AdvantagesEasy to install, economically priced.
The RangeDN20 - 600mm, PN10-16.BS10 Table D, EN1092-1 PN10, PN16.Larger Rubber Expansion Bellows can be quoted on request.
Advantages of a Pot StrainerPot Strainers reduce downtime for cleaning due to their construction including a bolted top cover and easily removable screen. They are accessed from above making them far easier to clean and replace the screen. Screens can be manufactured from any material, Stainless Steel Grade 316 is the preferred standard. Lifting eyes and handles are supplied on the cover plate of larger pot strainers enabling easier removal and replacement thereof.
‘Y’ Strainers are cleaned from underneath, often resulting in difficult access.
Pot Strainers can be manufactured to customer requirements including specialized coatings and dimensions.
The RangeDN50 - 900mm, PN10-64.
Pot StrainersRubber Bellows
Repair Collar
ApplicationFor the Repair of: - Leaking Bell & Spigot Pipe Joints - Leaking AC or GRP Pipe Collars - Leaking Couplings.
Repair Collars are made to order offering a quick and economical method of repairing leaking pipe joints. Creating a flexible joint that uses the same sealing principles as a standard mechanical coupling.
Repair Collars offer massive savings to the pipeline operator as the pipeline need not be emptied or cut in order to install the product to make the repair. Repair Collars are installed directly over the leaking joint or coupling without removing the existing leaking joint or coupling.
The RangeDN40 - 3000mm.
Permanent Pressure Pipe RepairThe G-Flex Repair Coupling is ideal for situations where a permanent repair of a pressure pipeline is required. Simply open up the coupling, wrap it around the damaged pipe and tighten the bolts. The pipe is repaired within minutes, thereby avoiding costly downtime. Being internally rubber lined and manufactured from Stainless Steel, the G-Flex Repair Coupling exhibits excellent corrosion resistance.
Superior Pressure RatingG-Flex Repair Couplings offer the highest pressure rating of any wrap around pipe repair clamp or coupling. Traditional Stainless Steel Pipe Repair Clamps (such as the Ultra Clamp) are unable to match the working pressure rating of a G-Flex Repair Coupling.
The RangeDN20 - 3000mm for virtually any pipe material.
G-Flex Repair
Pipe Repairs
9
Pipe Fittings
10
Advantages - Quick, simple, cost effective installation - No bolting required on site - Lighter than Cast Ductile Iron Fittings - Economically priced, less costly than Cast fittings - Locally manufactured, short lead times - Supplied with quality self-energizing seals - Robust - Various coatings available - Any standard or special fitting can be manufactured...
Special CoatingsCorrosion protection coatings of Fusion Bonded Epoxy (FBE), Two Pack Wet Spray Epoxy and Hot Dipped Galvanizing are available.
The Range315 / 355 / 400 / 450 / 500 / 630 / 710 & 800mm OD PVC pipe up to 25 Bar Working Pressure.
EnerSeal Boltless Fittings
ApplicationLarge Diameter Boltless Socketed Fittings for 315 - 800mm PVC pipe. This is the most economical method of introducing f i t t ings into a large diameter PVC pipel ine. Our comprehensive range of fabricated EnerSeal fittings includes, but is not limited to the following: - Bends - Equal Tees, Scour Tees, Hydrant Tees - Socketed Puddle Pipes - Y Pieces - Crosses - Flange Adaptors - Pressure Testing End Caps - Straight Repair Connectors - etc...
We WILL supply weld on EnerSeal sockets, complete with the F576 rubber seal, to customers and fitting fabricators. Enabling customers to manufacture their own EnerSeal Socketed fittings.
For jo in ing f langed p ipe l ine components to plain ended PVC pipes, EnerSeal Flange Adapters can be manufactured to suit any flange drilling up to and including PN25. From DN300 - 1000mm.
EnerSeal Dismantling Joints are essentially ‘studless’ dismantling joints. No adaptor end ring is present. Therefore, there are no studs to tighten down a dismantling joint adaptor end ring, the product is quicker and vastly easier to install saving the contractor time and money.
Advantages - Quick, simple, cost effective installation - No bolting required on site.
EnerSeal Boltless Fittings
ApplicationLarge Diameter Boltless Socketed Fittings for 315 - 1000mm PVC pipe, PN25.
PolyGrip Fittings
ApplicationFabricated PolyGrip Fittings were designed as simple, high performance, full end load restraint, mechanical, socketed fittings for PVC and HDPE pipe. PolyGrip Fittings, Couplings, Flange Adaptors and Restraining Harnesses are designed to support and grip the pipe, preventing pipe collapse and pipe end pullout. PolyGrip fittings are suitable for a working pressure of up to 16 bar (1600 kPa). Fabricated PolyGrip Fittings of any shape can be manufactured to order, including bends, equal & un-equal tees, scour tees, crosses, puddle pipes etc...
Cast Ductile Iron Fittings for PVC pipe are the most economical method of introducing small bore fittings into a PVC pipeline. By combining a PolyGrip Harness with a Cast Ductile Iron Fitting, it can be used as a fully restrained fitting for PVC or HDPE pipe.
The RangePolyGrip Products are available from OD90 - 315mm.
ApplicationFittings such as Tees, Bends, Reducers, Puddle Pipes etc., are manufactured to order. Corrosion protection coatings such as Carboline or Sigmaguard can be specified.
Socketed FittingsA socketed fitting is a fabricated steel fitting with a socketed end that consists of a self contained ‘half coupling’ that is suitable for virtually all rigid pipe materials. Plain ended pipe materials such as PVC, GRP and Ductile Iron can be inserted directly into the socketed fitting. Thus eliminating the need for special step couplings and providing special fittings suitable for all rigid pipe materials.
The RangeDN40 - 1200mm.
Flanged Fitting Socketed Fitting
Fabricated Fittings
11
Pipe Fittings
Sold un-coated ready for welding onto s tee l f i t t ings. Creat ing socketed fittings for plain ended PVC pipe. EnerSeal Half Couplings can be manufactured for working pressure ratings up to and including PN25. From DN300 - 1000mm.
EnerSeal Dismantling Joints are available:- DN50 - DN250 for PN10 & P N16- DN300 - DN1000 for all flange drillings up to PN25.
Our History
Quality
Established in September of 2007, Thomas Pipe Products is a company founded on humble beginnings. It is a company that
is innovative, technology driven, quality minded and one which acts with integrity with the interests of our suppliers, customers and employees at heart. Thomas Pipe Products currently employs over 100 people and sells product into over 20 countries.
We strive to meet or exceed the relevant industry standards for our products. With regular testing at the South African Bureau of Standards and submissions to JASWIC for accreditation we aim to maintain and continuously improve our product quality.
We Specialise in Specials...
12
NooitgedachtDN1500mm Step Couplings & Adaptors forBulk Water GRP Pipeline
Port ElizabethDN1500mm End CapPipeline Testing
RawsonvilleDN900mm BulkSteel Pipeline
Medupe Power StationDN350mm ReticulationSystem
Durban MetroDN900mm DedicatedFlange Adaptors
JHB Water DN450 EmergencyStep Couplings
Kitwe ZambiaDN700mm WeholiteSWP LP Couplings
ParowDN400mm SteelPipe Live Tap In
Hobsland Indaka630mm oPVCEnerSeal Fittings
MauritiusDN700mm AC PipeRepair Collar
Churchill DamDN900mm Steel Bulk Pipeline
TH
OM
AS
PIP
E P
RO
DU
CTS
TABLE OF POPULAR PIPE SIZES
WWW.THOMASPIPEPRODUCTS.COM
TEL: +27 21 556 5258
JOHANNESBURG
CAPE TOWNOF PIPE CONNECTION, REPAIR AND
FLOW CONTROL SOLUTIONS
DESIGNER, MANUFACTURER AND DISTRIBUTOR
CONNECTING INNOVATION
6 12 18 24 30 36 6 10 16 20
40 48,3 40
50 60,3 50 69
65 76,1 63 82
75 75
80 88,9 98 90 96
100 114,3 118 110 122
125 139,7 125 150
140 140
150 165,1 170 160 177 168 174 180 188 196
175 193,7 205
200 219 222 200 232 222 229 239 250 262
225 244 259
250 273 274 250 286 274 284 295 304 318 258 258 260 262
300 324 326 315 345 328 340 353 365 378 309 309 311 314 327
350 356 378 355 426 378 382 396 412 426 440 359 360 363 365 379
400 406 429 400 453 430 436 450 468 484 503 409 410 414 417 413
450 457 480 450 507 483 488 506 524 545 566 459 462 466 470 464
500 508 532 500 560 535 543 560 583 606 629 510 511 517 521 515
525 587
550 559 614 561 563 569 573
600 610 635 630 667 638 651 672 699 727 755 612 614 620 624 617
650 660 720 662 665 672
700 711 738 773 744 760 784 816 848 712 716 723 719
750 762 826 762 767 775
800 813 842 879 850 868 896 935 969 813 818 826 821
850 864 864 868 878
900 914 945 985 956 976 1008 1048 915 919 929 923
950 965 965 970 981
1000 1016 1048 1090 1062 1084 1120 1165 1016 1020 1032 1025
VECTUS
CLASS
AC - ASBESTOS CEMENT PIPE
FC - FIBRE CEMENT PIPE
GRP
FL
OW
TIT
E
NB
ST
EE
L
DI
PV
C /
HD
PE
CODCID CLASS
PIPE PRODUCTS
THOMAS