Ford Trademarks and Trade Dress used under license to Skullduggery, Inc.

General Motors Trademarks used under license to Skullduggery, Inc.

99

-17

11

04

-34

97

5

THe Showdown set / juego de persecución policial

CUSTOMER INFORMATION

Skullduggery, Inc. • 5433 East La Palma Ave. • Anaheim, CA 92807We guarantee the quality of all Skullduggery products. If this product does not perform properly, please contact us. In the USA call (800) 336-7745 M-F 8AM - 4PM Pacifi c time. International call (714) 777-6425. www.skullduggery.com • © 2016 Skullduggery, Inc.Max Traxxx® is a registered trademark of Skullduggery, Inc.Patent Pending.

Conforms to ASTM F963Non-Toxic, Ages 6 & up

TRACER RACERS

light trace

technology

featuring

REMOTE CONTROL

patent pending

trouble shooting

1. If the RC Racer only works sporadically, try one or both of the following:a. Point the controller at the Racer as it zooms around the track.b. Take a step or two back from the track so the infrared signal has a wider coverage angle. You can then experiment with standing different distances from the track to find the optimum distance to angle ratio.

2. If the RC Racer flies off the corners regularly, try the following:a. Make sure the track and the corner connectors are fit snuggly together. You will have control issues if one of the connectors is only partially connected.b. Utilize the variable control function on the controller (ease up on the trigger) to slow the Racer down when traveling through a corner.

3. If Racers are not charging enough to hit top speeds, then replace the AA batteries in the controllers to ensure adequate vehicle charging.

4. If Racers are not making it all the way through a loop make sure you start them no closer than 12 – 18 inches from the loop. This will create the speed and momentum necessary to make it fully through the loop.

5. Warning: Be careful operating vehicles on surfaces that contain loose fibers (such as hair or deep carpet) as the fibers can get caught around the wheels and axels and prevent tire rotation.

6. Warning: Do not expose glow-in-the-dark track to direct sunlight as this will adversely affect the tracks glow capabilities.

7. Tracer Racers RC Sets currently possess 8 different racers with 4 unique frequencies:

IMPORTANT - DO NOT RETURN PRODUCT

We’re here to help!

Call us @ 800.336.7745Monday thru Friday between 8:00 am - 5:00 pm (pacific)

ADVERTENCIA:PELIGRO DE ASFIXIA — Contiene piezas pequeñas. No conveniente para niños menores de 3 años.

!

Includes:

Compatible with major brands

REMOTE CONTROL

DUAL LANE RACINGSkullduggery guarantees your 100% satisfaction with this product. If you have any issues that are not addressed in this instructionbooklet, please call us at 800.336.7745.

OVEROVER

#098220

IMPORTANT: PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE

BATTERY

INSTALLATION

x-blox assembly

Read and follow operating instructions.1. Do not mix old and new batteries.2. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Nickel-cadmium) batteries.3. Only batteries of the same or equivalent type as recommended are to be used.4. Batteries are to be inserted with the correct polarity. 5. Exhausted batteries are to be removed from the product.6. The supply terminals are not to be short-circuited.7. Non-rechargeable batteries are not to be recharged.8. Rechargeable batteries are to be removed from the product before being charged (if removable)9. Rechargeable batteries are only to be charged under adult supervision.10. Dispose of batteries safely.11. Do not dispose of this product in a fire. The batteries inside may explode or leak.12. Batteries should be changed by adults only.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.

Effective signal range: 40 feet or 12 meters.

**This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.This Class B digital apparatus complies with Canadian ICES-003. Conforms to ASTM F963 standard. Contents and color may vary slightly from these shown. Please retain packaging for future reference.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

PRECAUCIÓN: Los cambios o modificaciones que se hagan a este aparato que no sean expresa-mente aprobados por la parte responsable del cumplimiento podrían anular la autoridad del usuario para operar el equipo.

OBSERVACIÓN: Este dispositivo ha sido probado y cumple con los límites para un dispositivo digital de Clase B, de acuerdo con la Parte 15 de los reglamentos de la Comisión Federal de Comunicaciones (FCC). Estos límites están diseñados para proporcionar una protección razonable contra interferencias peligrosas en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y se utiliza de acuerdo con las instrucciones, puede causar interferencias en las comunicaciones de radio.

Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación específica. Si este equipo causa interferencias adversas en la recepción de radio o televisión, lo cual puede comprobarse encendiéndolo y apagándolo, se recomienda al usuario que intente corregir la interferen-cia mediante una o más de las siguientes medidas:

- Vuelva a orientar o a ubicar la antena receptora.- Aumente la distancia de separación entre el equipo y el receptor.- Conecte el equipo a una toma eléctrica que esté en un circuito que no sea en el que está conectado el receptor.- Consulte a su distribuidor o a un técnico de radio/televisión con experiencia para obtener ayuda.

Alcance operante de la señal: 40 pies o 12 metros.

** Este dispositivo y su antena no deben colocarse ni operarse junto con otra antena o transmisor.Este aparato digital Clase B cumple con la norma ICES-003 de Canadá. El contenido y los colores pueden ser ligeramente de los que se muestran. Cumple con la norma ASTM F963.

Guarde el empaque para futuras referencias.

GENERAL BATTERY INFORMATION

IMPORTANT

X-BLOX

BASE PLATE

HINGES

RISERS

TRACK

Hint: Try to master a short jump prior to setting up for longer jumps. Drivers need to slow down at the correct time in order to regularly complete the jump successfully.

Riser plate slidesinto the track grooves

STEP A1. Unscrew battery door on handle2. Remove battery door from handle

STEP B1. Insert batteries as shown in diagram2. Replace battery door on handle

phillips headscrewdriver

A

A B

B

AA

LR

6 (

1.5

V)

AA

LR

6 (

1.5

V)

AA

LR

6 (

1.5

V)

AA

LR

6 (

1.5

V)

battery compartment battery compartment (open)

1.5v (LR-44) batteries

battery cover

phillips headscrewdriver

NOTE: Each controllerrequires 4 AA/LR6(1.5V) batteries(not included)

NOTE: Lap counterrequires 3 (LR-44)(1.5V) batteries(included)

DIGITAL LAP COUNTER

ON 0 1

ONOFFONOFF

ON

ON OFF

ONOFF/CHARGE

CHARGE

FORWARD / REVERSE

0 1

OFF/CHARGE

ON

CHARGE

Red Light will flash while charging.

Green light will appear once charging

is complete. You’re ready to race.

0 1

PLUG CHARGER

CORD INTO CAR

ONOFF

ON

ON

ON

Unplug power cord and turn vehicle

and controller to the ON position.

When not in use, turn OFF

controller and vehicle. Car

clips to the top of the

controller for easy storage.

0 1

FU

NC

TIO

NS

CH

AR

GE

RA

CE

ST

OR

AG

E

basic operation

Point controller directly at car while depressing

trigger for optimal performance

I.R. Function

ON0

1

ON0

1

performance tip

Contents

TRACK CURVE (right) X 8TRACK CURVE (left) X 8

12” TRACK X 4

24” TRACK X 10

CONTROLLER 1

TRACK RISER X 2

X-BLOX X 45

HINGE X 4

LANE CHANGER X 2

BASE PLATE X 2

6” TRACK X 4

16” TRACK X 2

LOOP TRACK X 2

ON 0 1ON 0 1

CONTROLLER 2

ON 0 1ON 0 1

VEHICLE 1

VEHICLE 2 TRACKCONNECTOR X 8

NOTE:

Both the racers and the controllers

have a built in sleep mode. If you leave

either one on, but do not utilize for 30

minutes, the power will automatically

turn off. To reactivate, simply turn

racer and/or controller off and then

back on again, and you are ready to

race.

LOOP BASE X 2

DIGITALLAP COUNTER X 1

TRACK ASSEMBLY

NOTE: Make sure all track pieces arefirmly connected to ensure maximumperformance.

TIP: For easier assembly connecttrack pieces side by side, first as shownin illustration.

SLIDE OR SNAP TRACKS SIDE BYSIDE TO CREATE TWO LANES.

Variable Speed Challenge: Add X-BLOX Construction

Brix to prop up corners and straightaways to increase

maneuvering difficulty

base plate

base plate

track corner

lane changer

lane changer

16in.

riser

hinges

X-Blox

X-Blox

X-Blox

X-Blox

X-Blox

loop track

LOOP BASE

no holes

track corner

track corner track corner

track corner

track corner

track corner

track connectors

track corner

2ft.

2ft.

2ft.

2ft.

2ft.

6in.

6in.

1ft.