thermovision -002 — imprimé au canada — décembre · pdf fileth-c...

TH-C

TLFR

5P-0

02 —

Impr

imé

au C

anad

a —

Déc

embr

e 20

15

Thermovision680 Industrial Blvd Saint-Jean-sur-Richelieu (Quebec) J3B 7X4

Phone : 450 348 4970Fax : 450 349 4575 Toll free : 888 588 4970

DISTRIBUTED BY CREATION DIMENSION

www.thermovision.ca TH-C

TLA

NG

-5P-

002

— P

rinte

d in

Can

ada

— F

ebua

ry 2

016

C a b i n e t d o o r m a n u f a c t u r e r

Polyester Collection

Visit us on line

w w w.thermovis ion.ca

1. Manufacturer’s WarrantyThermovision Products Inc. guarantees the quality of all its polyester products (the Products) against premature yellowing as well as apparent or hidden defects that make them unsuitable for their intended use or which result in premature deterioration for a period of 5 years.

2. Warranty PeriodThe present warranty is valid for a period of 5 years from the date of shipment of the Products. Repair and replacement of the Products by Thermovision do not have the e�ect of extending this warranty nor of instituting a new warranty period.

3. RestrictionsThis warranty does not apply to:a) outdoor installations;b) products that have been abused, misused, poorly maintained, installed improperly, burned, stained, soiled,

misshapen or otherwise damaged through negligence, accident or voluntarily;c) products that have been handled, modi ed, repaired or otherwise altered in any manner, by any person other than

Thermovision or a Thermovision representative;d) the deterioration of a component or external aging (surface) of the Products as a result of age or ordinary wear and

tear;e) the cost of installing and transporting the Products related to the application of the present warranty;f ) warping of doors over 32” high (maximum interior tolerance of 1/8” and exterior tolerance of 1/16”). Our warranty

does not cover labor fees.

4. ServicesTo bene t from the services of this warranty, simply return the Products with proof of purchase before the expiration date to the Seller from whom they were purchased. Thermovision will then choose, at its discretion, to replace, repair or credit any Products at a fee established on the basis of 1/5 of the suggested purchase price multiplied by the number of years elapsed since the original date of shipment. If the identical materials or products are not available when the request for warranty services is made, Thermovision reserves the right to substitute them with materials and models of comparable quality, without being obliged to replace all of the Products if only one or some of them are defective.

5. ExclusionThis constitutes the only warranty given by Thermovision on its Products and neither Sellers nor their agents are authorized to modify, extend or broaden the present warranty in the name of Thermovision.

RESTRICTIONS & MAINTENANCE

Restrictions: Avoid exposing polyester products to sources of extreme heat. Precautions must be taken when using certain electric countertop appliances. Toasters, kettles, portable ovens, and all other appliances creating heat or steam can a�ect nearby surfaces. Be sure to place these appliances so as to avoid a�ecting surfaces situated above the appliances.

Maintenance and precautions: Polyester products can be easily cleaned using mild soap and water. As with any quality product, certain precautions should be taken in order to preserve their appearance. Never use chemical products such as thinners, bleaches, or any cleaning product containing solvents or abrasives. It is especially important to avoid products containing acetone. Make sure to avoid scratching or striking polyester products with a sharp object since marks or permanent cuts could result.

555YEARS

LIMITED WARRANTY

Warranty

12 1

PO

LY

ES

TE

R

THERMOVISION.CA THERMOVISION.CA


It is upon the return of a successful trip that took place in the 1990’s, that Mr. Jean-Guy Surprenant decided to invest in a new technology that would allow him to become a pioneer in the fabrication of thermofoil doors in North America. Always looking for innovations, year after year he would develop new products, allowing Thermovision to become a dedicated leader specialized in the production of doors, accessories and components of high end furniture.

Always looking for key elements to build the best team there is, solid and dynamic, he was then joined by Mrs. Paule Gagnon, the executive director. In 1997, they created a new enterprise, named Thermovision, Mrs. Gagnon played a lead role in the success and growth of the company.

In the year 2000, Mr. Jean-Guy Surprenant asked his daughter Annick to join the team as the chief engineer. A passionate visionary, she made numerous e�orts so that Thermovision would remain an innovative company on the cutting edge of technology.

It is after the well deserved retirement of Jean-Guy Surprenant in 2010 that Annick Surprenant, now president and executive director and Paule Gagnon vice-president of nances, then became combined shareholders of the com-pany. It was by having their expertise and particular attention to detail that they were able to ful ll customer’s needs making Thermovision a model of INNOVATION and respect where team work, pride and pleasure are combined.

40214022 5027

WP22

4632 4716 4634

47664794

4123 70314439

23/4” (70,0 mm)

5/8” (15,9 mm)

11/4” (31,8 mm)

1/4” (6,35 mm)

41/2” (114,3 mm)

3/4” (19,7 mm)

35/16” (84.3 mm)

33/4” (96.4 mm)

27/8” (73.5 mm)

27/8” (73.5 mm)

4” (102 mm)

3” (78.5 mm)

3” (77.9 mm)

41/4”(102 mm)21/2”

(62,3 mm)

33/4” (94,9 mm)

1/4” (6,35 mm)

1”(25,4 mm)

1” (25,4 mm)

23/4”” (70,0 mm)

5/8” (15,9 mm)

7/8” (22,2 mm)

5/8”(15,9 mm)

23/8” (59,9 mm)

27/16”(61,7 mm)

31/4” (83,9 mm)

113/16” (45,9 mm)

35/8” (92,5 mm)

35/16” (84,5 mm)

2”(49.5 mm)

2” (50.5 mm)

PVC edgebanding Heat de�ector 5/8 '' or 3/4 ''

Laminate / Link 25 Sheet Heat de�ector

Polyestery t

11

PO

LY

ES

TE

R

2 THERMOVISION.CA THERMOVISION.CA

Accessories

is proud to present our POLYESTER COLLECTION.

Our 5-piece POLYESTER COLLECTION allows you to design your space with a look that says real wood. The 90 degree door o�ers a vertically assembled door with a unique method for outstanding accuracy and an exclusive look.

In addition to receiving a 5 year warranty, all of our models are available in more than 35 colors.

Our products have shown ZERO FORMALDEHYDE EMISSION and thus passes the Phase 2 CARB requirements.

Penciled GlazeYou can add a touch of charm and re�nement by applying our penciled glaze on single and double beaded panels only.

You can choose from our 5 available decorative glaze colors.

*Please note that by default, a black penciled glaze will be applied.

Thermovision

*Pleasse note tse n that b dtha default a bdef lack pena b

TAN BROWN RUST WHITE BLACK

ZERO FORMALDEHYDEEMISSION

40214022 5027

WP22

4632 4716 4634

47664794

4123 70314439

23/4” (70,0 mm)

5/8” (15,9 mm)

11/4” (31,8 mm)

1/4” (6,35 mm)

41/2” (114,3 mm)

3/4” (19,7 mm)

35/16” (84.3 mm)

33/4” (96.4 mm)

27/8” (73.5 mm)

27/8” (73.5 mm)

4” (102 mm)

3” (78.5 mm)

3” (77.9 mm)

41/4”(102 mm)21/2”

(62,3 mm)

33/4” (94,9 mm)

1/4” (6,35 mm)

1”(25,4 mm)

1” (25,4 mm)

23/4”” (70,0 mm)

5/8” (15,9 mm)

7/8” (22,2 mm)

5/8”(15,9 mm)

23/8” (59,9 mm)

27/16”(61,7 mm)

31/4” (83,9 mm)

113/16” (45,9 mm)

35/8” (92,5 mm)

35/16” (84,5 mm)

2”(49.5 mm)

2” (50.5 mm)



Polyestery t

11

PO

LY

ES

TE

R


Accessories








Thermovision




10

PO

LY

ES

TE

R

3THERMOVISION.CA THERMOVISION.CA

MODELS 4 LITES 6 LITES 8 LITES 11LITES

Min. width Min. height Min. width Min. height Min. width Min. height Min. width Min. height

Style « A » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”*Style « B » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”

Style « C » 13- 5/8” 17- 3/4”Style « D » 13- 5/8” 18- 5/8”

* Style B: Please take note that this mullion style must be ordered higher than wide.

A B C

5 Mullion styles are available:

6 glass models:

D One lite

NATURAL CLEAR FROSTED BRONZE SMOKYGREY MIRROR

The groove for the glass insert is painted in order to compliment the color of the mullion unless speci�ed ”unpainted“ by the customer.Glass options are available in STANDARD glass with a minimum charge of 2ft2 or TEMPERED glass with minimum charge of 4ft2.Allow 2 weeks shipping for tempered glass.Glass thickness may vary between 3 to 4 mm and is sold installed only.Thermovision will not be held responsible for damages caused by glass breakage.

Mullions Collection

Due to the di�erences in printing processes, the colors shown in this catalog may vary from the actual product colors.

CENTERS0 = Flat 1 = Single beaded2 = Double beaded

MOULDINGS

U - 10

U - 3

U - 9

U - 8

U - 4

U - 4 1 0 0ANGLE CUTS0 = 45 degrees 9 = 90 degrees

PANELS0 = Melamine

90°45°

tn

4 9

PO

LY

ES

TE

R

PO

LY

ES

TE

R


MODELS DOORS DRAWERS Min. width Min. height

U-10000, U-10100, U-10200 5- 1/2” 5- 1/2”

- MULLIONS, refer to page 10 for available models.- ACCESSORIES, refer to page 11.- MULTIPLE PANELS are not available.

For doors and mullions over 42'' high, we recommend that additional hinges be installed. Thermovision’s warranty against warping applies only to doors and mullions with a maximum height of 42”.

Minimum charge: 1.5 ft2

The maximum width and height are 47 "and 93" respectively.Please refer to our "Color Chart" for available colors (separate pamphlet).

The color we used to present the 10 000 series is: U-10000 Memento - H76 | U-10100 Daybreak - L764 | U-10200 Morning Dew - L763


U-3000, U-3100, U-3200 5- 1/4” 5- 1/4”U-3009, U-3109, U-3209 7- 1/4” 5- 1/4”





The color we used to present the 3000 series is: U3009 River Rock - L538 | U3000, U3100, U3200 white

2 1/2” (63.5mm)

3/4”19 mm

1/4”7 mm

1 19/32”(40.4 mm)

1 19/32”(40.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

3/4”19 mm

1/4” (6.45 mm)3/16” (4.4 mm)

2 1/4” (57.2 mm)5/16” (8 mm)

9/16” (15 mm)

U-10 000 U-10 100 U-10 200

By default,the grooves in

the beaded modelsare black

U-3009

U-3000 U-3100 U-3200

90°



Series 10 000

Series 3000

PHO

TO C

OU

RTES

Y O

F T

END

AN

CES

CON

CEPT

PHO

TO C

OU

RTES

Y O

F T

END

AN

CES

CON

CEPT

8 5

PO

LY

ES

TE

R

PO

LY

ES

TE

R


The color we used to present the 9000 series is: U-9000, U-9100, U-9200 Silva H50 | U-9009, U-9109, U-9209 Daybreak L764


U-9000, U-9100, U-9200 5- 1/2” 5- 1/2”U-9009, U-9109, U-9209 6- 1/2” 5- 7/8”

- MULLIONS are not available.- ACCESSORIES, refer to page 11.- MULTIPLE PANELS are not available.




MODELS DOORS DRAWERS Min. width Min. heightU-4000, U-4100, U-4200 6- 3/4” 6- 3/4”U-4009, U-4109, U-4209 8- 3/4” 6- 3/4”U-43009 8- 3/4” 5- 1/4”




*The U-43009 drawer illustrated above is optional only. The standard default model is U-4009.The maximum width and height are 47 "and 93" respectively.Please refer to our "Color Chart" for available colors (separate pamphlet).

The color we used to present the 4000 series is: U-4009 River Rock - L538 | U-4000, U-4100, U-4200 Hiteak -511

90°



U-4000 U-4100 U-4200

U-4009 U-9200

*Shown drawerU-43009

2 1/4” (56.4 mm)

1 1/2”(37.4 mm)

3/4”18.6 mm

1/4”7.05 mm

1/8” (3.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

3/4”19 mm

1/4”6.45 mm

3/16” (4.4 mm)3” (76.2 mm)

90°90° 90°





U-9000 U-9100

U-9109 U-9209U-9009

Series 4000

Series 9000

6 7

PO

LY

ES

TE

R

PO

LY

ES

TE

R


The color we used to present the 8000 series is « Southwester - L535 »

MMODELS DOORS DRAWERS Min. width Min. height

U-8000 5- 1/2” 5- 1/2”U-8009 7- 3/4” 5- 7/8”





The color we used to present the 8000 series is « Ember - H53 »


U-8100, U-8200 5- 1/2” 5- 1/2” U-8109, U-8209 7- 3/4” 5- 7/8”





90° 90° 90°U-8000 U-8009

U-8200

U-8209

U-8100

U-8109





PHO

TO C

OU

RTES

Y O

F T

END

AN

CES

CON

CEPT

Series 8000

Series 8000

2 1/2” (63.5 mm)

2” (50.8 mm)3/4”

19 mm3/16” (4.4 mm)

1/4”6.45 mm

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

8 5

PO

LY

ES

TE

R

PO

LY

ES

TE

R




U-9000, U-9100, U-9200 5- 1/2” 5- 1/2”U-9009, U-9109, U-9209 6- 1/2” 5- 7/8”











90°



U-4000 U-4100 U-4200

U-4009 U-9200


2 1/4” (56.4 mm)

1 1/2”(37.4 mm)

3/4”18.6 mm

1/4”7.05 mm

1/8” (3.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

3/4”19 mm

1/4”6.45 mm

3/16” (4.4 mm)3” (76.2 mm)

90°90° 90°





U-9000 U-9100

U-9109 U-9209U-9009

Series 4000

Series 9000

8 5

PO

LY

ES

TE

R

PO

LY

ES

TE

R




U-9000, U-9100, U-9200 5- 1/2” 5- 1/2”U-9009, U-9109, U-9209 6- 1/2” 5- 7/8”











90°



U-4000 U-4100 U-4200

U-4009 U-9200


2 1/4” (56.4 mm)

1 1/2”(37.4 mm)

3/4”18.6 mm

1/4”7.05 mm

1/8” (3.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

3/4”19 mm

1/4”6.45 mm

3/16” (4.4 mm)3” (76.2 mm)

90°90° 90°





U-9000 U-9100

U-9109 U-9209U-9009

Series 4000

Series 9000

4 9

PO

LY

ES

TE

R

PO

LY

ES

TE

R



U-10000, U-10100, U-10200 5- 1/2” 5- 1/2”





The color we used to present the 10 000 series is: U-10000 Memento - H76 | U-10100 Daybreak - L764 | U-10200 Morning Dew - L763


U-3000, U-3100, U-3200 5- 1/4” 5- 1/4”U-3009, U-3109, U-3209 7- 1/4” 5- 1/4”





The color we used to present the 3000 series is: U3009 River Rock - L538 | U3000, U3100, U3200 white

2 1/2” (63.5mm)

3/4”19 mm

1/4”7 mm

1 19/32”(40.4 mm)

1 19/32”(40.4 mm)

1 19/32” (40.4 mm) 1 19/32” (40.4 mm)

3/4”19 mm

1/4” (6.45 mm)3/16” (4.4 mm)

2 1/4” (57.2 mm)5/16” (8 mm)

9/16” (15 mm)

U-10 000 U-10 100 U-10 200



U-3009

U-3000 U-3100 U-3200

90°



Series 10 000

Series 3000

PHO

TO C

OU

RTES

Y O

F T

END

AN

CES

CON

CEPT

PHO

TO C

OU

RTES

Y O

F T

END

AN

CES

CON

CEPT

10

PO

LY

ES

TE

R




Style « A » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”*Style « B » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”

Style « C » 13- 5/8” 17- 3/4”Style « D » 13- 5/8” 18- 5/8”


A B C


6 glass models:

D One lite



Mullions Collection



MOULDINGS

U - 10

U - 3

U - 9

U - 8

U - 4


PANELS0 = Melamine

90°45°

tn

10

PO

LY

ES

TE

R




Style « A » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”*Style « B » 10- 1/4” 14” 10- 1/4” 18” 10- 1/4” 22”

Style « C » 13- 5/8” 17- 3/4”Style « D » 13- 5/8” 18- 5/8”


A B C


6 glass models:

D One lite



Mullions Collection



MOULDINGS

U - 10

U - 3

U - 9

U - 8

U - 4


PANELS0 = Melamine

90°45°

tn40214022 5027

WP22

4632 4716 4634

47664794

4123 70314439

23/4” (70,0 mm)

5/8” (15,9 mm)

11/4” (31,8 mm)

1/4” (6,35 mm)

41/2” (114,3 mm)

3/4” (19,7 mm)

35/16” (84.3 mm)

33/4” (96.4 mm)

27/8” (73.5 mm)

27/8” (73.5 mm)

4” (102 mm)

3” (78.5 mm)

3” (77.9 mm)

41/4”(102 mm)21/2”

(62,3 mm)

33/4” (94,9 mm)

1/4” (6,35 mm)

1”(25,4 mm)

1” (25,4 mm)

23/4”” (70,0 mm)

5/8” (15,9 mm)

7/8” (22,2 mm)

5/8”(15,9 mm)

23/8” (59,9 mm)

27/16”(61,7 mm)

31/4” (83,9 mm)

113/16” (45,9 mm)

35/8” (92,5 mm)

35/16” (84,5 mm)

2”(49.5 mm)

2” (50.5 mm)



Polyestery t

11

PO

LY

ES

TE

R


Accessories








Thermovision




1. Manufacturer’s WarrantyThermovision Products Inc. guarantees the quality of all its polyester products (the Products) against premature yellowing as well as apparent or hidden defects that make them unsuitable for their intended use or which result in premature deterioration for a period of 5 years.

2. Warranty PeriodThe present warranty is valid for a period of 5 years from the date of shipment of the Products. Repair and replacement of the Products by Thermovision do not have the e�ect of extending this warranty nor of instituting a new warranty period.

3. RestrictionsThis warranty does not apply to:a) outdoor installations;b) products that have been abused, misused, poorly maintained, installed improperly, burned, stained, soiled,

misshapen or otherwise damaged through negligence, accident or voluntarily;c) products that have been handled, modi ed, repaired or otherwise altered in any manner, by any person other than

Thermovision or a Thermovision representative;d) the deterioration of a component or external aging (surface) of the Products as a result of age or ordinary wear and

tear;e) the cost of installing and transporting the Products related to the application of the present warranty;f ) warping of doors over 32” high (maximum interior tolerance of 1/8” and exterior tolerance of 1/16”). Our warranty

does not cover labor fees.

4. ServicesTo bene t from the services of this warranty, simply return the Products with proof of purchase before the expiration date to the Seller from whom they were purchased. Thermovision will then choose, at its discretion, to replace, repair or credit any Products at a fee established on the basis of 1/5 of the suggested purchase price multiplied by the number of years elapsed since the original date of shipment. If the identical materials or products are not available when the request for warranty services is made, Thermovision reserves the right to substitute them with materials and models of comparable quality, without being obliged to replace all of the Products if only one or some of them are defective.

5. ExclusionThis constitutes the only warranty given by Thermovision on its Products and neither Sellers nor their agents are authorized to modify, extend or broaden the present warranty in the name of Thermovision.

RESTRICTIONS & MAINTENANCE

Restrictions: Avoid exposing polyester products to sources of extreme heat. Precautions must be taken when using certain electric countertop appliances. Toasters, kettles, portable ovens, and all other appliances creating heat or steam can a�ect nearby surfaces. Be sure to place these appliances so as to avoid a�ecting surfaces situated above the appliances.

Maintenance and precautions: Polyester products can be easily cleaned using mild soap and water. As with any quality product, certain precautions should be taken in order to preserve their appearance. Never use chemical products such as thinners, bleaches, or any cleaning product containing solvents or abrasives. It is especially important to avoid products containing acetone. Make sure to avoid scratching or striking polyester products with a sharp object since marks or permanent cuts could result.

555YEARS

LIMITED WARRANTY

Warranty

12 1

PO

LY

ES

TE

R



It is upon the return of a successful trip that took place in the 1990’s, that Mr. Jean-Guy Surprenant decided to invest in a new technology that would allow him to become a pioneer in the fabrication of thermofoil doors in North America. Always looking for innovations, year after year he would develop new products, allowing Thermovision to become a dedicated leader specialized in the production of doors, accessories and components of high end furniture.

Always looking for key elements to build the best team there is, solid and dynamic, he was then joined by Mrs. Paule Gagnon, the executive director. In 1997, they created a new enterprise, named Thermovision, Mrs. Gagnon played a lead role in the success and growth of the company.

In the year 2000, Mr. Jean-Guy Surprenant asked his daughter Annick to join the team as the chief engineer. A passionate visionary, she made numerous e�orts so that Thermovision would remain an innovative company on the cutting edge of technology.

It is after the well deserved retirement of Jean-Guy Surprenant in 2010 that Annick Surprenant, now president and executive director and Paule Gagnon vice-president of nances, then became combined shareholders of the com-pany. It was by having their expertise and particular attention to detail that they were able to ful ll customer’s needs making Thermovision a model of INNOVATION and respect where team work, pride and pleasure are combined.

Visit us on line

w w w.thermovis ion.ca

TH-C

TLFR

5P-0

02 —

Impr

imé

au C

anad

a —

Déc

embr

e 20

15

Thermovision680 Industrial Blvd Saint-Jean-sur-Richelieu (Quebec) J3B 7X4

Phone : 450 348 4970Fax : 450 349 4575 Toll free : 888 588 4970

DISTRIBUTED BY CREATION DIMENSION

www.thermovision.ca TH-C

TLA

NG

-5P-

002

— P

rinte

d in

Can

ada

— F

ebua

ry 2

016


Polyester Collection

thermovision -002 — imprimé au canada — décembre · pdf fileth-c...

Documents