the technology and practice oriented brand for automation ... · engineering systems m2m,...
TRANSCRIPT
The Technology and Practice Oriented Brand for Automation Technology and Electrical Engineering
www.etz.de
Media Kit 2020
newsletter 8/2019
Anzeige
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Mehr darüber und zu dem was sich sonst noch in der Welt der Automation und Elektrotechnik im vergangenen Monat ereignet hat sowie anstehenden Veranstaltungen, erfahren Sie wieder in diesem etznewsletter. Bei der Lektüre wünschen wir Ihnen wieder viel Vergnügen, Ihr etzTeam
Anzeige
Einstieg in die Highend-Messtechnik:Präzise, schnell, robust
Anzeige
AB SOFORTLIEFERBAR!
IHR WEG IN DIE DIGITALE ZUKUNFT.
AB SOFORTLIEFERBAR!
ASi-5AUTOMATISIERUNG
NEU GEDACHT.
BW_Transformer_ASi_5_190x30.indd 1 12.12.18 10:32
IoT Analytics, Spezialist für Studien und Marktübersichten rund um die Themen Internet of Things (IoT), M2M und Industry 4.0, hat Endanwender nach ihren Erfahrungen mit IoTPlattformen gefragt. Die Ergebnisse wurden jetzt in dem 184Seiten umfassenden IoT Platforms End User Satisfaction Report 2019 veröffentlicht. Der Report will die Transparenz in dem Markt für IoTPlattformen verbessern und ranked die Plattformen
(sowohl für die Telekommunikation als auch für die Industrie) nach der Kundenzufriedenheit basierend auf über 800 Datenpunkten. mehr ...
Ranking der 25 besten IoT-Plattformen
Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt
am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung. mehr ...
RS Components zieht nach Frankfurt/Main
Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (Bild) informiert auf 135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver
zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden. mehr ...
AMA veröffentlicht Anbieterübersicht
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der ElektromechanikDistributor evg mit Stammsitz in Mönchengladbach (Bild) auf eine 50jäh
rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r
Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau. mehr ...
50 Jahre evg
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Der globale MultiChannelvon Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
RS Components zieht nach Frankfurt/Main
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der Elektromechaniktributor evg mit Stammsitz in Mönchengladbach (
50 Jahre evg
TITELSTORYBerechtigungskonzepte: Safety & Security im Zusammenspiel
MULTITURN-ENCODERSchrittmotoren in Sachen Performance aufrüsten
DURCHGÄNGIG BIS ZUR CLOUDKommunikationsfähigesPower Management
7/2019www.etz.de
A810
0
Media Kit Journal3
2020
1 Title: etz elektrotechnik & automation
2 Short Summary:etz is published monthly and in further 5 special editions and offers information in a technology and practice-oriented way on electrical engineering, automation and drive technologies, energy and process automation, test and measurement as well as renewable energies and energy effi ciency. Besides the technical and application oriented articles and product news the journal gives valued information on a regular basis on all electrotechnical safety standards and drafts. etz has one of the highest percentage of subscribers of all journals in German targeting the market of industrial electrotechnical and automation technology.
3 Target Group:etz provides engineers and technicians in the fi eld of discrete manufacturing & machine automation, electrotechnical and supply industry valued information as a basis for the decision making process in their professional fi eld.
4 Publication Frequency: monthly plus 5 special issues
5 Size of Journal: DIN A4 (210 mm × 297 mm)
6 Volume: 141th Volume 2020
7 Subscription Rates: Subscription (1 year) € 163.00* Single issue € 11.90*
8 Organ: Organ of the VDE, the GMA and the ETG
9 Memberships: IVW, AMF, Media Database of the German Trade Press
10 Publishing House: VDE VERLAG GMBH Kaiserleistraße 8 A · 63067 Offenbach · Germany www.vde-verlag.de
11 Publisher: VDE Verband der Elektrotechnik Elektronik Informations-technik e. V. (German Association for Electrical, Electronic and Information Technologies)
12 Advertising: Ronny Schumann, Advertising ManagerPhone +49-69-84 00 06-13 40, Fax -13 98Email [email protected]
13 Editors: Dipl.-Ing. Ronald Heinze, Editor-in-ChiefDipl.-Ing. Frank Nolte, Deputy Editor-in-ChiefDipl.-Ing. Inge HübnerDipl.-Ing. Markus HohlPhone +49-69-84 00 06-13 31, Fax -13 98Email [email protected]
14 Content Analysis 2018 = 16 IssuesTotal Volume 1,627 pages = 100 %Editorial Part 1,279 pages = 77.3 %Advertisements 345 pages = 22.7 % thereof: Publisher‘s own ads 15 pages = 1.6 % Inserts 5
15 Content Analysis of the Editorial Part 2018 = 1,279 pages
According to the type of the articles:Technical and application-oriented articles 46 %Product information,Market and sector information 19 %Notifi cations of Standards and Miscellaneous 35 %
*= plus postage
1
Profi le
Media Kit Journal2
2020 Table of Contents
Journal 1 Profi le Page 3
T Editorial Calendar Page 4P Rate Card Page 12P Product-Advertorial-PLUS Page 14F Formats and Technical Information Page 152 Circulation and Geographical Analysis Page 193-E Structural Analysis of Recipients Page 21
Website 1 Profi le Page 24
P Advertising Rates Page 25N Metrics Page 25F Formats and Technical Information Page 26
Newsletter 1 Profi le Page 27
P Advertising Rates Page 28N Metrics Page 28F Formats and Technical Information Page 29
Content Marketing Page 30
Your Contacts Page 34General Terms and Conditions Page 35
The brand etz includes the following products:– the professional journal etz as technology and practice-oriented magazine
for automation and electrical engineering with the topics: “Discrete Manufacturing & Machine Automation”, “Process Automation & Energy Automation”, “Drive Engineering & Switching Technology”, and “Components & Periphery”,
– the special editions “Hanover Fair”, “Electro mechanical Components”, and “SPS smart production solutions”,
– the etz-Report,– the portal www.etz.de,– the monthly published etz-newsletter (+ special editions),– the etz@tour, and– the etz Business Talk (Premium Webinar.
TITELSTORYBerechtigungskonzepte: Safety & Security im Zusammenspiel
MULTITURN-ENCODERSchrittmotoren in Sachen Performance aufrüsten
DURCHGÄNGIG BIS ZUR CLOUDKommunikationsfähigesPower Management
7/2019www.etz.de
A810
0
DURCHGÄNGIG BIS ZUR CLOUD
newsletter 8/2019
Anzeige
ULTRA FAST AUTOMATION1µs REAKTIONSZEIT
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Mehr darüber und zu dem was sich sonst noch in der Welt der Automation und Elektrotechnik im vergangenen Monat ereignet hat sowie anstehenden Veranstaltungen, erfahren Sie wieder in diesem etznewsletter. Bei der Lektüre wünschen wir Ihnen wieder viel Vergnügen, Ihr etzTeam
Anzeige
Einstieg in die Highend-Messtechnik:Präzise, schnell, robust
Anzeige
AB SOFORTLIEFERBAR!
IHR WEG IN DIE DIGITALE ZUKUNFT.
AB SOFORTLIEFERBAR!
ASi-5AUTOMATISIERUNG
NEU GEDACHT.
BW_Transformer_ASi_5_190x30.indd 1 12.12.18 10:32
IoT Analytics, Spezialist für Studien und Marktübersichten rund um die Themen Internet of Things (IoT), M2M und Industry 4.0, hat Endanwender nach ihren Erfahrungen mit IoTPlattformen gefragt. Die Ergebnisse wurden jetzt in dem 184Seiten umfassenden IoT Platforms End User Satisfaction Report 2019 veröffentlicht. Der Report will die Transparenz in dem Markt für IoTPlattformen verbessern und ranked die Plattformen
(sowohl für die Telekommunikation als auch für die Industrie) nach der Kundenzufriedenheit basierend auf über 800 Datenpunkten. mehr ...
Ranking der 25 besten IoT-Plattformen
Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt
am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung. mehr ...
RS Components zieht nach Frankfurt/Main
Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (Bild) informiert auf 135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver
zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden. mehr ...
AMA veröffentlicht Anbieterübersicht
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der ElektromechanikDistributor evg mit Stammsitz in Mönchengladbach (Bild) auf eine 50jäh
rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r
Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau. mehr ...
50 Jahre evg
3Publication Date: 02.03.20
Advertisements: 11.02.20
Editorial Submissions: 16.01.20
Safety-Oriented Automation
Operating and Monitoring/IPC and HMI
Compact PLC
MES and Industrie 4.0
Industrial Image Processing
Robotics
Industrial Bus Systems and Industrial Ethernet
Position and Rotary Encoders
Data Analytics
Control Systems and Engineering Systems
M2M, Teleservice, Remote Control, and Remote Maintenance
Datalogger
Modular Automation
Energy Management and Measurement Technology
Process Sensors (pressure, filling level, temperature, humidity, mass flow)
Industrial Security
Servo, Step and Linear Drives
Integrated Safetyfor Drive Technology
Middle Voltage Switchgear
Small and Compact Drives
Recording of Electrical Values
UPS, Power Supplies, Batteries, and Transformers
Cables, Wires, and Screwed Cable Glands
Light Barriers and Light Grids
Displays, and Control Units
Power Distribution Systems
Light+Building Frankfurt/M., 08.03. – 13.03.20
LogimatStuttgart, 10.03. – 12.03.20
Metav Düsseldorf, 10.03. – 13.03.20
EMVKöln, 17.03. – 19.03.20
MSR-Spezialmesse Rhein-MainFrankfurt/M., 25.03.20
AutomatisierungstreffBöblingen, 24.03. – 26.03.20
Special: Digital Transformation and Automation Solutions for Intralogistics and Logistics
4Publication Date: 09.04.20
Advertisements: 13.03.20
Editorial Submissions: 18.02.20
Smart Sensors
Integrated Automation Solutions for Machine Engineering
Wireless Communication
Condition Monitoring and Predictive Maintenance
Logic Modules and Compact Controllers
Quality Assurance
IO-Link, Automation ML, MQTT and OPC UA
Big Data and Cloud- Applications
Control and Monitoring Systems
Asset Management
Process Data Communications
Cloud Solutions
Energy Management and Energy Measuting Technology
Grid Quality and Monitoring
Converter Technology and Circuit Feedback
Power Quality and Reactive Current Compensation
Soft Starter and Motor Protection Equipment
Switches, Contactors, Fuses, and Relays
Smart IO Components
Push-Buttons, Keyboards, Displays, and Terminals
Testing and Measuring
Interface Technology, Connectors, and Connection Technology
Portable Measurement Equipment
Hannver FairHanover, 20.04. – 24.04.20
IFAT MUnich, 04.05. – 08.05.20
PCIMNuremberg, 05.05. – 07.05.20
ControlStuttgart, 05.05. – 08.05.20
InterpackDüsseldorf, 07.05. – 13.05.20
Smart Automation Austria Vienna/Austria, 12.05. – 14.05.20
Special: Automation in the Packing Industry
S2Publication Date: 09.04.20
Advertisements: 20.03.20
Editorial Submissions: 25.02.20
Special Issue
HANNOVER MESSE: Industrial TransformationWith focus on:
Automation; Motion & Drive; Digital Ecosystems; Energy Solutions
Hannver FairHanover, 20.04. – 24.04.20
Media Kit Journal4
2020
Issues and Deadlines
Discrete Manufacturing and Machine Automation
Process Automation and Energy Automation
Drive Engineering and Switching Technology
Components and Periphery
Fairs and Events
1-2Publication Date:18.02.20
Advertisements: 29.01.20
Editorial Submissions: 02.01.20
IoT-Gateways and IoT-Controllers
Decentralized Automation Components
Identifying Systems (RFID, Barcode, Scanner, Traceability)
Field Busses, Industrial Ethernet, TSN and OPC UA
Optical and Vision Sensors
Interdisciplinary Engineering
Process Control Technique for Power Stations and Networks
IT Solutions for Power Transmission
M2M and Remote Maintenance
Industrial Bus Systems and Remote IO
Scada and Process Control Systems
Diagnosis and Predictive Maintenance
Switches, Contactors, and Relays
Frequency Converters, Drive Control, and Motion Control
Peripheral Drives
AC-, DC- and Gear Motors
Cables, Insulated Cords, and Fiber-Optic Cables
Portable Measurement Equipment
Smart IO Components
Housings and Cabinets for Decentralized Automation
Data Collection, Measurement Processing and Recording
CAD/CAE and Engineering Tools
EMC, Lightning and Overvoltage Protection
MaintenanceDortmund, 12.02. – 13.02.20
Embedded WorldNuremberg, 25.02. – 27.02.20
VDE Tec Summit Berlin, 26.02. – 27.02.20
All About AutomationFriedrichshafen, 04.03. – 05.03.20
Special: Embedded Systems, Embedded Computing, IoT
S1Publication Date: 02.03.20
Advertisements: 06.02.20
Editorial Submissions: 13.01.20
Special Issue
Components for the Control CabinetIndustrial Housings and Cabinets, CAD/CAE, Climatisation, Switching Power Supplies,
Switches, Relays, Push-Buttons, Contactors and Fuses, Drive Protection,Cables and Wires, Cable Assemblies, Busbar Connection Systems,
Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems,
Panel Meters, Measuring InstrumentsType-Approved Switchgear and Accessories, Energy Sorage Solutions
Light+Building Frankfurt/M., 08.03. – 13.03.20
Energy Storage EuropeDüsseldorf, 10.03. – 12.03.20
T
Editorial Calendar
6Publication Date: 05.06.20
Advertisements: 14.05.20
Editorial Submissions: 17.04.20
PLC, Controller, and PC-Based Control Systems
Industrial Communication and Interfaces
MES and IT-Supported Optimization of Production
Digital Transformation in the Field
Smart Sensors in the Production
Energy Automation, Virtual Power Plants and Grid Stability
Energy Management
M2M, Remote Control, and Remote Maintenance
Industrial Security
Electric Safety Technology
Small and Compact Drive Systems
Safety Solutions of Drive Technologies
Frequency Converters and Servo Drives
Safety Relays and Safety Components
Light Barriers and Light Grids
Testing and Measuring
Push Buttons
CAD/CAE and Engineering Tools
UPS, Power Supplies, Batteries, and Transformers
AutomaticaMunich, 16.06. – 19.06.20
DrupaDüsseldorf, 16.06. – 26.06.20
Sensor + TestNuremberg, 23.06. – 25.06.20
ZellchemingFrankfurt/M., 23.06. – 25.06.20
Automation Baden-Baden, 30.06. – 01.07.20
Special: Robotics, Assistance Systems & Handling Automation
7Publication Date: 10.07.20
Advertisements: 22.06.20
Editorial Submissions: 26.05.20
Panel-, Rack-, Box- and Embedded-PC
Position and Rotary Encoders
Mobile Operating Systems
Condition Monitoring and Stateful Maintenance
S7 Compatible Control Solutions
Safety-Engineered Automation
Industrial Ethernet
Scada Systems, Process control and Visualization Systems
Components for Hazardous Areas
Life Cycle Management
Process Sensors (pressure, filling level, temperature, humidity, mass flow)
Energy-Efficient Drive Technologies
AC-, DC- and Gearbox Motors
Switchboard Plants and Periphery
Connectors and Clamps
Cooling Systems and Climate Control
Cables, Insulated Cords, and Fiber-Optic Cables
Industrial Ethernet Infrastructure Components
Signalling Devices
Special: IoT Controllers and Cloud Solutions
8Publication Date: 28.08.20
Advertisements: 10.08.20
Editorial Submissions: 15.07.20
Decentralized Automation Components
Compact Controllers
Data Acquisition and Processing
Optical and Color Sensors
IO-Link, Automation ML, MQTT and OPC UA
Codesys Products for Automation
Industrial Security
Remote IO Systems
Measurement and Regulation of Temperature
Industrial Bus Systems and Remote IO
Smart Measurement Technologies
Web and Cloud Technologies
Soft Starter and Motor Protection Equipment
Servo Drives
Switches, Contactors, and Relays
Middle Voltage Switchgear
Cabinets, Industrial Housings, and Electronical Packaging
Lightning and Overvoltage Protection, EMC
CAD/CAE and Engineering Tools
Measuring Systems in the Cabinet
Labeling Systems
Components for the DC Industry
Husum WindHusum, 10.09. – 13.09.19
MSR-SpezialmesseLudwigshafen, 18.09.19
EMOHanover, 16.09. – 21.09.19
All About AutomationLeipzig/Schkeuditz, 11.09. –12.09.19
efaLeipzig, 18.09.-20.09.19
Special: Electrical Engineering and Automation in Maritime and Mobile Applications
Media Kit Journal6
2020
Issues and Deadlines
Discrete Manufacturing and Machine Automation
Process Automation and Energy Automation
Drive Engineering and Switching Technology
Components and Periphery
Fairs and Events
5Publication Date: 15.05.20
Advertisements: 24.04.20
Editorial Submissions: 30.03.20
Safety-Engineered Automation
Industrial Bus Systems, Industrial Ether net, TSN, and OPC UA
Identifying Systems (RFID, Barcode, Scanner, Traceability)
IoT Gateways and IoT Controllers
Visualisation Systems
Industrial Vision Systems
Digital Twins
Augmented Reality
Process Sensors (pressure, filling level, temperature, humidity, mass flow)
Scada and Process Control Systems
Supply Isolators, Measurement Transducers, and Isolation Amplifiers
Remote IO Systems andModular Automation
Controllers
Drive Control Systems
Linear Drives and Compact Drive Systems
Peripheral Drives
Middle Voltage Switchgear
Cables, Wires, and Screwed Cable Glands
Portable Measurement Equipment
Lightning and Overvoltage Protection,EMC
Components for Hazardous Areas
UPS, Power Supplies, Batteries, and Transformers
Energy Storage
Materials, Insulation Material
The Smarter E Europe/Intersolar Munich, 17.05. – 19.05.20
All About AutomationEssen, 27.05. – 28.05.20
MSR-Spezialmesse RheinlandLeverkusen, 27.05.20
SPS Italia – smart production solutionsParma/Italy Servparc
Frankfurt/M., 17.06. – 18.06.20
Servparc
Frankfurt/M., 17.06. – 18.06.20
Servparc
Frankfurt/M., 17.06. – 18.06.20
, 26.05. – 28.05.20
CWIEMEBerlin, 26.05. – 28.05.20
S3Publication Date: 05.06.20
Advertisements: 08.05.20
Editorial Submissions: 14.04.20
Special Issue
Components for the Control CabinetIndustrial Housings and Cabinets, CAD/CAE, Climatisation, Switching Power Supplies,
Switches, Relays, Push-Buttons, Contactors and Fuses, Drive Protection,Cables and Wires, Cable Assemblies, Busbar Connection Systems,
Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems, Panel Meters, Measuring Instruments
Type-Approved Switchgear and Accessories
Ligna Hanover, 27.05. – 31.05.19
Cired Madrid/Spain, 03.06. – 06.06.19
All About Automation Essen, 05.06. – 06.06.19
MSR-Spezialmesse Hamburg, 19.06.19
T
Editorial Calendar
10Publication Date: 13.10.20
Advertisements: 23.09.20
Editorial Submissions: 28.08.20
Integrated Automation Systems
Industrial Computing and Panel-PC
Industrial Bus Systems and Industrial Ethernet
Integrated Engineering and Simulation Software
Operating, Monitoring, and HMI
Big Datat and Cloud Applications
Industrial Security
Identifying Systems (RFID, Barcode, Scanner, Traceability)
Process Sensors (pressure, filling level, temperature, humidity, mass flow)
Components for Hazardous Areas
Energy Measurement Technologies
Seamless Communication for the Energy Automation
Energy-Efficient Drive Technologies
Direct Drives
Special and Compact Drive Systems
Drive Control Systems
Drives with Integrated Safety Functions
Low Voltage and Protection Technologies
Signalling Lamps and Indicator Lights
Cables, Wires, and Power Supply Systems
Components for Power Electronics
Data Collection, Measurement Processing and Recording
Push Buttons
Industrial Ethernet Infrastructure Components
K MesseDüsseldorf, 16.10. – 23.10.19
MSR-SpezialmesseLandshut, 23.10.19
Special: 140 Years etz – Anniversary Edition
S4Publication Date: 03.11.20
Advertisements: 09.10.20
Editorial Submissions: 15.09.20
Special Issue
Components for the Control CabinetIndustrial Housings and Cabinets, CAD/CAE, Climatisation, Switching Power Supplies,
Switches, Relays, Push-Buttons, Contactors and Fuses, Drive Protection,Cables and Wires, Cable Assemblies, Busbar Connection Systems,
Interface Technology, Connectors and Clamps, Multimeters, Infrared Measuring Equipment, Tools, Engineering, Labeling Systems, Panel Meters,
Type-Approved Switchgear and Accessories
EnergyDecentralHanover, 17.11. – 20.11.20
SPS smart production solutionsNuremberg, 24.11. – 26.11.20
Media Kit Journal8
2020
Issues and Deadlines
Discrete Manufacturing and Machine Automation
Process Automation and Energy Automation
Drive Engineering and Switching Technology
Components and Periphery
Fairs and Events
9Publication Date: 16.09.20
Advertisements: 27.08.20
Editorial Submissions: 03.08.20
Safety-Oriented Automation
IoT-Gateways and IoT-Controller
Wireless Automation and 5G
Industrial Image Processing
Human-Robot-Cooperation
Vibration Measurement and Monitoring
Artificial Intelligence and Data Analytics
M2M, Remote Control and Remote Maintenance
Supply Isolators, Measurement Transducers, and Isolation Amplifiers
Energy Management
Modular Automation
Frequency Converters and Servo Drives
Integrated Drive Solutions
Linear Drives
Motion Control
Safety Relais and Components
Smart IO Komponents
Energy Supply Systems
Cabinets, Industrial Housings, and Electronical Packaging for Distributed Automation
Light Barriers and Light Grids
WindEnergyHamburg, 22.09. – 25.09.20
Powtech Nuremberg, 29.09.-01.10.20
MotekStuttgart, 05.10. – 08.10.20
Special: Smart EnergyEnergy Automation, Energy Measuring Equipment,
Energy Management and Renewable Power Generation
T
Editorial Calendar
The Transmedia Concept
S5Publication Date: 17.11.20Advertisements: 28.10.20Editorial Submissions: 01.10.20
Special Issue
Innovations at the SPS IPC DRIVESAll about Electrical Automation and Drive Technology as well as Digitization Solutions
in Engineering and Plant Manufacturing with a lot of Practical Stories
SPS IPC DrivesNuremberg, 26.11. – 28.11.19
Special: Digital Ecosystems, Industrie 4.0, and IoT
12Publication Date:11.12.20
Advertisements: 26.11.20
Editorial Submissions:02.11.20
Safety-Oriented Automation
LPC and PC-Based Control Systems
Rotary Encoders
Integrated Engineering and Simulation Software
Modular Automation for Batch Size 1
S7-PLC Periphery
Artificial Intelligenceand Data Analytics
Process Sensors (pressure, mass flow, and filling level)
Scada Systems, Process Visualization Systems, Control and Monitoring Systems
Energy Automation, Smart Grid and Smart Metering
Grid Quality and Monitoring
Energy Management
Motion Control
Safety Technology
Switches, Contactors, and Relays
Small and Compact Drive Systems
Portable Measurement Equipment
Interface Technology
Cabinets, Industrial Housings, and Electronical Packaging for Distributed Automation
Special: Best of Automation 2020
TITELSTORYBerechtigungskonzepte: Safety & Security im Zusammenspiel
MULTITURN-ENCODERSchrittmotoren in Sachen Performance aufrüsten
DURCHGÄNGIG BIS ZUR CLOUDKommunikationsfähigesPower Management
7/2019www.etz.de
A810
0
newsletter 8/2019
Anzeige
ULTRA FAST AUTOMATION1µs REAKTIONSZEIT
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Mehr darüber und zu dem was sich sonst noch in der Welt der Automation und Elektrotechnik im vergangenen Monat ereignet hat sowie anstehenden Veranstaltungen, erfahren Sie wieder in diesem etznewsletter. Bei der Lektüre wünschen wir Ihnen wieder viel Vergnügen, Ihr etzTeam
AnzeigeEinstieg in die Highend-Messtechnik:Präzise, schnell, robust
Anzeige
AB SOFORTLIEFERBAR!
IHR WEG IN DIE DIGITALE ZUKUNFT.
ASi-5AUTOMATISIERUNGNEU GEDACHT.
BW_Transformer_ASi_5_190x30.indd 1
12.12.18 10:32
IoT Analytics, Spezialist für Studien und Marktübersichten rund um die Themen Internet of Things (IoT), M2M und Industry 4.0, hat Endanwender nach ihren Erfahrungen mit IoTPlattformen gefragt. Die Ergebnisse wurden jetzt in dem 184Seiten umfassenden IoT Platforms End User Satisfaction Report 2019 veröffentlicht. Der Report will die Transparenz in dem Markt für IoTPlattformen verbessern und ranked die Plattformen
(sowohl für die Telekommunikation als auch für die Industrie) nach der Kundenzufriedenheit basierend auf über 800 Datenpunkten. mehr ...
Ranking der 25 besten IoT-Plattformen
Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung.mehr ...
RS Components zieht nach Frankfurt/Main
Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (Bild) informiert auf 135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver
zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden.mehr ...
AMA veröffentlicht Anbieterübersicht
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der ElektromechanikDistributor evg mit Stammsitz in Mönchengladbach (Bild) auf eine 50jäh
rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau.mehr ...
50 Jahre evg
8/8/8 2019
Mehr darüber und zu dem was sich sonst noch in der Welt der Automa
Einstieg in die Highend-Messtechnik:Präzise, schnell, robust
IHR WEGDIE DIGITALE ZUKUNFT.
-5AUTOMATISIERUNGNEU GEDACHT.
Ranking der 25 besten IoT-Plattformen
Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver
AMA veröffentlicht Anbieterübersicht
Media Kit Journal10
2020
T
Editorial Calendar
Issues and Deadlines
Discrete Manufacturing and Machine Automation
Process Automation and Energy Automation
Drive Engineering and Switching Technology
Components and Periphery
Fairs and Events
11Publication Date:03.11.20
Advertisements: 14.10.20
Editorial Submissions:18.09.20
Sensors and Proximity Switches
Operating and Monitoring/HMI
LPC and PC-Based Control Systems
IoT-Gatewaysand IoT Controller
Industrial Ethernet and Industrial Bus Systems
Industrial Image Processing
Panel- and Embedded PC
MES and IT-Supported Optimization of Production
Codesys Products
Digital Transformation in the Field
Scada Systems and Process Control Systems
Process Data Communications
Energy Management
Condition Monitoring and Diagnostics
Industrial Security
Frequency Converters and Servo Drives
Integrated Drive Solutions
Peripheral Drives
CAD/CAE and Engineering Tools
Displays, Monitors, and Control Units
Testing and Calibrating
Light Barriers and Light Grids
Power Semiconductors
UPS, Power Supplies, Batteries, and Transformers
Connectors and Clamps
Vision Stuttgart, 10.11. – 12.11.2020
electronicaMunich, 10.11. – 13.11.20
Brau BevialeNuremberg, 10.11. – 12.11.20
FormnextFrankfurt/M., 10.11. – 13.11.20
SPS smart production solutionsNuremberg, 24.11. – 26.11.20
PMR expoCologne, 24.11. – 26.11.20
Special: Safety & Security in Automation
Media Kit Journal13
2020
P
Rate Card No. 68valid from January 1st, 2020
Average of actually distributed circulation:23,816 copies
2 Preferential PlacementsTitle Page: (1/1 page 4c) € 8,250.–Four-colored only. The price includes a 4c picture repetition and a legend in the table of contents. No discounts can be given. Size of the picture 200 mm width and 190 mm height. Please be aware that the address label will be pasted at the bottom on the left-hand side. Closing date and binding closing day for printing material (electronic fi le): 5 weeks before publication date.
Inside Front Cover: (Format: 185 mm × 175 mm) € 4,350.–Advertorial: (1/2 page 4c) € 2,550,– (1/1 page 4c) € 3,600.–Page 2., Inside Back Cover and Back Cover: (1/1 Seite 4c) € 7 850.–Binding Placement: € 235.–
The Title Page image and the Inside Front Cover must fi t into the journal‘s editorial standard. Please contact the editorial staff in case of queries.
3 Discounts: On purchase within one year, starting with the publication of the fi rst advertisement. Only one discount scale can be applied.
Frequency Scale: 2 × 3 % 3 × 6 % 5 × 10 % Volume Scale: 2 pages 5 % 3 pages 10 % 5 pages 12 % 4 Recruitment and Classifi ed Advertisements:
Discounts refer to the basic b/w price. (No additional discounts can be given.) Classifi ed Advertisements 15 %* Job Advertisements 50 %* Box Number Charge € 9.00 5 Special Advertisements: (Technical Information on pages 17and 18) Bound-In Inserts: Discount: 1 sheet = 1 advertisement page.
Paper Weight 2-sided 4-sided 6-sidedup to 100 g/m2 € 5,740.– € 8,565.– € 11,485.– up to 140 g/m2 € 6,790.– € 9,490.– € 12,875.– up to 180 g/m2 € 7,040.– € 10,325.– € 13,860.–
Multiple pages and more than 180 g/m² upon request.
Loose Inserts: Inserts up to 25 g (no discounts): € 300.00 ‰Inserts with a higher weight upon request.Prices include postage. Inserts with a thickness of 3 mm up to 30 mm require additional postage.
Affi xed Reply Postcards/Samples, etc.: Affi xed Reply Postcards are charged as inserts.
We charge up to 25 g € 102.50 ‰(higher weights on request) Charge for gluing € 91.50 ‰
6 Contact for Advice, Booking:Ronny Schumann, Advertising ManagerPhone + 49-69-84 00 06-13 40, Email [email protected]
7 Terms of Payment/Bank Accounts:Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039, BIC 101 201 00, IBAN DE36 1012 0100 6123 5490 39,SWIFT/BIC WELADED1WBB
UniCredit Bank AG, Berlin, Acc. No. 2 668 386, BIC 100 208 90, IBAN DE 78 1002 0890 0002 6683 86, SWIFT/BIC HYVEDEMM488
Payments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.
*= on delivery of electronic advertising fi les only
Media Kit Journal12
2020
P
Rate Card No. 68valid from January 1st, 2020
Average of actually distributed circulation:23,816 copies
1 Advertising Sizes and Prices: (Please add the appropriate value added tax to all prices, if applicable)
Format Width × Height in mm Price b/w Price 2c Price 4cBleed
(add 3 mm bleed size on all four rims)
Type Area(column spacing: 6 mm)
2/1 pages (Spread A4) 420 × 297 € 9,815.– € 10,465.– € 11,615.–
1/1 page (A4) 210 × 297 170 × 248 € 5,320.– € 5,975.– € 7,125.–
Juniorpage 150 × 210 125 × 186 € 3,335.– € 3,990.– € 5,155.–
1/2 page vertical 107 × 297 82 × 248 € 2,755.– € 3,415.– € 4,570.–
1/2 page horizontal 210 × 148 170 × 121 € 2,755.– € 3,415.– € 4,570.–
1/3 page vertical 78 × 297 53 × 248 € 1,810.– € 2,475.– € 3,630.–
1/3 page horizontal 210 × 103 170 × 78 € 1,810.– € 2,475.– € 3,630.–
1/4 page 107 × 146 82 × 121 € 1,410.– € 1,730.– € 2,320.–
1/4 page vertical 52 × 297 38 × 248 € 1,410.– € 1,730.– € 2,320.–
1/4 page horizontal 210 × 82 170 × 57 € 1,410.– € 1,730.– € 2,320.–
1/8 page 107 × 82 82 × 57 € 720.– € 1,030.– € 1,600.–
1/8 page vertical 52 × 146 38 × 121 € 720.– € 1,030.– € 1,600.–
1/8 page horizontal 210 × 40 170 × 26 € 720.– € 1,030.– € 1,600.–
price per mm for special sizes € 5.36 € 6.25 € 8.14
Media Kit Journal15
2020 Formats and Technical Information
F
1 Size of Journal: 210 mm wide, 297 mm high, DIN A4Full Page Type Area: 170 mm wide, 248 mm high
4 columns each 38 mm wide
2 Printing and Binding: Offset printing (sheets or rolls), saddle stitch or glue binding is used.
3 Electronic Data Submission: For digital media please use our email address [email protected] or send a CD-ROM/DVD. Please remark on Delivery Note:– order name/name and issue of publication– fi nal output format (specify a bleed of 3 mm, if applicable).
4 Data File Formats: We recommend the delivery of PDF data fi les. In addition, the following programs are supported: – Adobe Indesign/Photoshop/Illustrator up to Version CC– Microsoft Word up to Version 2016At least the fi le must be ready to be printed: all fonts needed have to be in-cluded, contiunuos-tone pictures require a resolution of 300 dpi and line art pictures at least of 600 dpi. No password protection.
5 Color Processing: Process colors (CMYK) according to ISO 12647-2 (PSO), special colors on request. Our standard offset profi le is „Coated FOGRA39 (ISO 12647-2:2004)“ of ECI.
6 Proof: Color proofs for “standard print media” (bvdm). Digital proofs need to have the Fogra media wedge included to verify the color accuracy (availa-ble for purchase at the www.fogra.org). Proofs must have an offi cial print control strip.
7 Data Archiving: Data will be archived, therefore unchanged repetitions are possible. However, a guarantee on data archiving is not provided.
8 Guarantee: Upon delivery of incomplete or incorrect data (text, colors, images), we assume no liability for printing results. Exposure errors due to incomplete or corrupted data fi les, incorrect preferences or incomplete information will be charged. This also applies to additional composition or reproduction work and for the consequences of incorrect proofs.
9 Contact: Leonie Ströver, Order ManagementPhone + 49-69-84 00 06-13 42 Email [email protected]
Requirements for a Smooth Production FlowIf not delivering a PDF/X-3 data fi le:Please make sure that all fi les and data necessary for reproduction are included. All TIFF or EPS picture fi les (including logos) have to be supplied. Do not save fi les in JPEG or GIF Format.Please make sure that all fonts used (in EPS fi les as well) are included or supplied additionally as printer and screen fonts.We are not able to modify or correct any Postscript fi les.
For color advertisements you may only use the process colors cyan, magenta, yellow and black (CMYK), no RGB colors. If you are using special spot colors it must be denoted clearly as they have to be printed in a seperate form and they are charged seperately.
Please include a binding proof/laser printout.
Media Kit Journal14
2020
P
Product Advertorial PLUSThe smart solution for your company advertisement (print and newsletter ad)
Your Advantages with Product Advertorial PLUS + 1/4 product ad in etz + 1/4 online ad in etz-newsletter + thematic positioning + far reach for your product advertisement
We create print- and online-compatible product advertisements in a basic layout (format: 1/4 page, 4c within typing area, 82 mm × 121 mm) for € 940.–.
We Design Your AdvertisementWe only need your company logo, an image and a short description of your product (max. 500 characters) as well as a link for the newsletter ad. Of course, you‘ll get a galley proof before printing. If you want to design your ad yourself, please provide the print fi les in the format 82 mm × 105 mm (w × h) and we will incorporate them in the basic layout. The ads will be published in the etz in the following thematic areas. They will also be published in the next newsletter as well (format: 82 mm × 121 mm).
Issue PublicationDate
Advertise-ments
EditorialSubmissions
Topics
1-2 18.02.20 29.01.20 02.01.20 Embedded Systems & IoT Cables, Wires, and Plug Connections
3 02.03.20 11.02.20 16.01.20 Industrial Bus & IO Link Components Power Supply/UPS/Power Units
4 09.04.20 13.03.20 18.02.20 Industrial Ethernet Products Displays, Monitors, and Control Units
S2 09.04.20 20.03.20 25.02.20 Industrial Computers & Panel PC Components for the Control Cabinet
5 15.05.20 24.04.20 30.03.20 Rotary Encoders Cables, Wires, and Plug Connections
6 05.06.20 14.05.20 17.04.20 Industrial PC Smart Sensors
7 10.07.20 22.06.20 28.05.20 CAD/CAE & Engineering Tools LPC & Controllers
8 28.08.20 10.08.20 15.07.20 Smart Sensors IoT Gateways & IoT Controllers
9 16.09.20 27.08.20 03.08.20 Safety Components Industrial Ethernet Products
10 13.10.20 23.09.20 28.08.20Drive Technology
Operating and Moderating/Process Visualization
11 03.11.20 14.10.20 18.09.20 Frequency Converters & Servo Drives HMI/Scada
S5 17.11.20 28.10.20 01.10.20 IoT Gateways Industrial Bus & IO Link Components
12 11.12.20 26.11.20 02.11.20 LPC & Controllers Industrial Computers & Panel PC
MANAGED & UNMANAGED · 10/100/1000TX | 4-, 8-, 16-Port | 24 VDC | Hutschiene
POE & LWL · Full Gigabit | max. 60 W PoE | Splitter, Injector, Extender
WALL MOUNT · 10/100/1000TX, Gigabit-SFP | managed per LCD Touch | flach
www.spectra.de/Planet
INDUSTRIAL SWITCHES
Spectra GmbH & Co. KG Mahdenstraße 3D-72768 Reutlingen
Tel. +49-71 21-14 32-10 Fax +49-71 21-14 32-190 [email protected]
Gateways für Industrie und Gebäudeautomatisierung
• Kompakte Bauweise• Flexibel einsetzbar durch großen Temperaturbereich
von -40 °C bis +85 °C• Einfachste Anbindung an Ihre GLT• Galvanische 3-Wege-Trennung• Software: einfach, intuitiv, kostenlos!
wachendorff-prozesstechnik.de/gatewaysWachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7, 65366 Geisenheim
Tel. +49-67 22-99 65-5 44, E-Mail: [email protected]
www.wachendorff-prozesstechnik.de
Media Kit Journal17
2020 Formats and Technical Specifi cations Bound-In Inserts
F
3 mm
6 mm
Bound-In Inserts: Prior to the fi nal acceptance we need a sample (or at least a dummy with the expected weight and dimensions) of the planned bound-in inserts. Bound-in inserts are only allowed if they promote the sales program of one company only. According to postal regulations they must be designed in such a way, that they cannot be misinterpreted as editorial pages. The placement of bound-in inserts is constrained to the technical possibilities. Bound-in inserts printed on a non-paper material are only allowed if the publisher has the consent of the postal authorities.
Formats: Each sheet 306 mm high, 213/216 mm wide(including bleed: 6 mm at the head, 3 mm at the foot, 3 mm at inner and outer edge with adhesive binding or 3 mm at outer rim only with wire stitching.
Copies required: 24,200 copies
Technical Specifi cations: The bound-in inserts are to be delivered untrimmed (and folded, if applicable). The front page of the inserts have to be clearly marked. They have to be ready for insertion without the need of further work. If any additional folding and/or gluing work is necessary, it will be charged seperately. If the insert consists of several pages, it has to be folded in such a way, that it is closed in the direction of the fold (direction of the insertion). Otherwise extra costs have to be charged.
Delivery Address: Prepaid delivery, untrimmed and ready for insertion, with delivery note “For ‘etz‘ Edition … (No.)” to:
Druckerei Heenemann GmbH & Co. KGBessemerstr. 83 – 91 · 12103 Berlin ∙ Germany
432 mm untrimmed**
426 mm untrimmed*
213 untrimmed*
216 untrimmed**
306
mm
unt
rim
med
4 pages
Fold with 3 + 3 mm**/without* grind off
210 trimmed
297
mm
tri
mm
ed
3 mm
6 mm
213 mm untrimmed*
216 mm untrimmed**
210 trimmed
2 pages
306
mm
unt
rim
med
297
mm
tri
mm
ed
3 mm grind off**
6 mm
620 mm untrimmed**
614 mm untrimmed*
206 untrimmed
Fold with 3 + 3 mm**/without* grind off
195 mm
3 mm
6 mm
Fold
297
mm
tri
mm
ed
306
mm
unt
rim
med
6 pages parallel fold
* wire stitching only ** adhesive binding only
Media Kit Journal16
2020
F
Formats and Technical Information
Type Area:170 × 248 mmBleed:210 × 297 mm
Type Area:53 × 248 mm
Bleed:78 × 297 mm
1/2 page
vertical
Type Area:82 × 248 mm
Bleed:107 × 297 mm
Type Area:170 × 78 mm
Bleed:210 × 103 mm
Type Area:170 × 121 mm
Bleed:210 × 148 mm
Type Area:38 × 248 mm
Bleed:52 × 297 mm
Juniorpage
Type Area:125 × 186 mm
Bleed:150 × 210 mm
Type Area:82 × 121 mm
Bleed:107 × 146 mm
Type Area:82 × 57 mm
Bleed:107 × 82 mm
Type Area:170 × 57 mm
Bleed:210 × 82 mm
Bleed:420 × 297 mm
Spread A4 1/1 page A4
1/2 pagehorizontal
1/3 pagever-tical
1/3 pagehorizontal
1/4 page ver-tical
1/4 page 1/4 page
horizontal1/8
page
Media Kit Journal19
2020
1 Circulation Monitoring:
2 Circulation Analysis: Average number of copies (July 1st, 2018 – June 30th, 2019
(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019
Copies Printed: 24,000
Actual Distributed Circulation (ADC): 23,816 thereof abroad: 498 thereof late entries
from previous reporting periods: 0
Sold Copies*: 1,296 thereof abroad: 112 – by subscription*: 1 227 – other sales*: 173 thereof member-copies: 159 – individual copies sold: –
Free Copies*: 22,501
Surplus, Archive, and Specimen Copies*: 184
3 Geographical Distribution Analysis:
Economic Area Percentage of actual distribution
% Copies
Federal Republic of Germany 97.91 23,318 Foreign countries (mainly Austria and Switzerland) 2.09 498
Actual Distributed Circulation (ADC) 100 23,816
Circulation and Geographical AnalysisAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/20192
* Source: IVW quarterly reports 2nd Quarter 2019
Media Kit Journal18
2020 Formats and Technical Specifi cations Loose Inserts, Affi xed Advertising Media
F
Loose Inserts: Prior to the fi nal acceptance we need a sample (or at least a dummy with the expected weight and dimensions) of the planned inserts. Loose inserts are only allowed if they promote the sales program of one company only. According to postal regulations they must be designed in such a way, that they cannot be misinterpreted as editorial pages. The placement of loose inserts is constrained to the technical possibilities.
Insertion Note: A free note is included in the table of contents.
Copies Required: 24,200 copies.
Delivery Date: Up to 10 days after the deadline for advertisements, see schedule and editorial calendar.
Format: Maximum 205 mm wide × 292 mm high
Delivery Address:Delivery of the inserts by trucks with tail-lift only, freight paid and ready for insertion, with delivery note “For ‘etz’ Edition … (No.)” to::
Scholz | Direct · Kundenmanagement · Richard Scholz GmbHBessemerstr. 38 – 42 · 12103 Berlin ∙ Germany
Technical Specifi cations: Loose inserts have to be composed of one piece and must be ready for insertion without further treatment. If any additional work (e. g. folding) is necessary, it will be charged seperately. Inserts printed on a non-paper material are only accepted after presentation of a fi nal sample and if the publisher has the consent of the printing shop and the postal authorities. If the insert consists of several pages, it has to be folded in such a way, that it is closed in the direction of the fold (direction of insertion).
Affi xed Advertising Media: Affi xed Reply Postcards are charged as inserts: We charge up to 25 g € 102.50 ‰(heigher weights on request) Charge for gluing € 91.50 ‰
Other advertising material (samples, CD/DVD, etc.) is charged as loose insert.
Copies Required: 24,200 copies
Delivery Address for Affi xed Advertising Media:Prepaid delivery and ready for insertion, with delivery note “For ‘etz‘ Edition … (No.)” to:
Druckerei Heenemann GmbH & Co. KGBessemerstr. 83 – 91 · 12103 Berlin ∙ Germany
Glu
ed E
dge
Direction of Insertion
70 mm
Media Kit Journal21
2020
3-E
Structural Analysis of RecipientsAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019
1 Economic Branches
WZ 2008 Code Branches Percentage
35, 36 Energy Supply, Water Supply, Mining 4.20 %
20, 21 Chemical and Pharmaceutical Industry 2.70 %
24, 25 Metal Production and Processing 3.10 %
26, 26.1, 27, 27.1, 27.3 Electrical Engineering, Electronics 17.60 %
26.5 Measurement and Control Technology, Automation Technology 23.30 %
28 Mechanical and Plant Engineering 21.30 %
29 Automotive Industry 2.80 %
62, 71 Engineering Consultants, Software Companies, Systems Houses, Systems Integrators 7.20 %
10, 11 Food and Beverage Industry 2.00 %
85, Sonstige (Others) Other, Education and Training, Universities 5.50 %
99999 Branches according to EDA not collected 2.20 %
Other Branches e. g. Self-Employed Persons 8.00 %
Rounding-off Difference 0.10 %
Actually Distributed Circulation 100.00 %
Media Kit Journal20
2020 Circulation and Geographical AnalysisAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/20192
Classifi cation of the Copies per Region:
Federal States Percentage ofactual distribution
Percentage Copies
Baden-Württemberg 21.50 % 5,124
Bavaria 14.40 % 3,429
Berlin 2.20 % 525
Brandenburg 1.40 % 335
Bremen 0.60 % 146
Hamburg 1.20 % 292
Hesse 10.00 % 2,373
Mecklenburg-Western Pomerania 0.70 % 162
Lower Saxony 6.80 % 1,622
North-Rhine Westphalia 19.20 % 4,567
Rhineland-Palatinate 4.70 % 1,109
Saarland 1.40 % 335
Saxony 3.50 % 839
Saxony-Anhalt 1.20 % 294
Schleswig-Holstein 2.20 % 530
Thuringia 1.80 % 439
Abroad 2.10 % 498
Others*) 5.00 % 1,196
Rounding Difference 0.10 % 1
ADC (annual average) 100.00 % 23,816
Nielsen Area Percentage ofactual distribution
Percentage Copies
Nielsen Area 1 11.00 % 2,610
Nielsen Area 2 19.10 % 4,548
Nielsen Area 3 A 16.00 % 3,816
Nielsen Area 3 B 21.50 % 5,121
Nielsen Area 4 14.40 % 3,433
Nielsen Area 5 2.20 % 523
Nielsen Area 6 3.30 % 797
Nielsen Area 7 5.30 % 1,272
Abroad 2.10 % 498
Others *) 5.00 % 1,196
Rounding Difference 0.10 % 2
ADC (annual average) 100.00 % 23,816
*) Others = not analysed copies (e. g.: copies for fairs and events. book stores. individual copies sold. Postbox ZIP code in conjunction with federal states. etc.)
Media Kit Journal23
2020
3-E
Structural Analysis of RecipientsAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019
Field of Acitivity
2.1 %
33.4 %
1.1 %
17.1 %
38.8 %
2.4 %
5.0 %
No Personal Data
Senior Management
Management of Branches, Plants, etc.
Department Head, Divisional Head
Professionals
Department (w/o Personal Address)
Others**)
Media Kit Journal22
2020
3-E
Structural Analysis of RecipientsAverage number of copies July 1st, 2018 – June 30th, 2019(according to directive (“Richtlinien”) § III, 1)corresponding to IVW quarterly reports III/2018 – II/2019
2 Position of the Recipients
WZ 2008 Code Function of the Personal Recipients Percentage
11 Senior Management 33.8 %
161, 33, 34 Planning, Consulting, Development 34.7 %
44, 51, 54, 56 Production & Quality Control 6.6 %
6, 72 Purchase, Sales 3.6 %
111 Technical Management 2.4 %
53 Automation, Process Measuring and Control Technology 0.4 %
97 Private Persons/Self-Employed Persons 1.4 %
99 Functions according to EDA not collected 5.0 %
Other Functions 7.2 %
Others 5.0 %
Rounding-off Difference – 0.1 %
Actually Distributed Circulation 100.0 %
25
2020
Media Kit Website
1 Advertising Sizes and Prices
Format Width × Height Pricein Pixel per month
Ad Layer (run of Site) as per agreement € 4,615.–
Billboard Banner (run of Site) 960 × 250 € 3,025.–
Wallpaper (Super Banner + Wide Skyscraper) (run of Site)
728 × 90 +160 × 600
€ 2,490.–
Page Peel (run of Site) 500 × 500 € 1,365.–
Wide Skyscraper (run of Site) 160 × 600 € 1,365.–Skyscraper (run of Site) 120 × 600 € 1,130.–
Super Banner (run of Site) 728 × 90 € 1,190.–
Full Banner Premium (run of Site)
468 × 60€ 915.–
Full Banner Top (on Homepage) € 620.–Full Banner Base (on Homepage) € 520.–
Medium Rectangle I(on Homepage)
300 × 250
€ 965.–
Medium Rectangle II (run of Site) € 1,130.–
Webcast/Whitepaper 3 months 6 months12 months
€ 830.– € 1,335.–€ 1,865.–
Advertorial – € 1,880.–
All banners are placed exclusively without rotation! On www.etz.de you can place, besides common ad formats, all ad formats of the “Universal Ad Package,” which is adopted by the Interactive Advertising Bureau (IAB) and the European Interactive Advertising Associa-tion (EIAA) for Europe.Ad Layers are designed in consent with the publisher. By appropriate click buttons they dont‘t interfere with the user experience when reading the web site.
2 Discounts: –
3 Sections: News Web-StoreProducts Market Surveys
Technical Articles Media Branches Newsletter etz@tour Glossary
4 Special Topics: Wind Energy, Photovoltaic, Shipbuilding,Smart Energy, E-Mobility, Packaging
5 Terms of Payment/Bank Accounts: Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039, BIC 101 201 00,
IBAN DE36 1012 0100 6123 5490 39, SWIFT/BIC WELADED1WBB
UniCredit Bank AG, Berlin, Acc. No. 2 668 386, BIC 100 208 90, IBAN DE 78 1002 0890 0002 6683 86, SWIFT/BIC HYVEDEMM488
Payments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.
Metrics
1 Control: –
2 Metrics: 174,454 Visitors; 232,881 Page impressions per yearSource: Google Analytics (October 2018 – September 2019)
Advertising Rates/Metrics
P - N
24
2020
1 Web Address: www.etz.de
2 Short Summary: The technology and practice based orientation of the journal etz is refl ected in its
website. On a daily basis the newest products in the fi elds of industrial electrical engineering, automation and drive industry as well as test and inspection techniques are published in a contemporary way. The information portal is replenished with business news related to electrical engineering, energy and automation industry as well as a calendar with important events and market surveys. In the section “Branchen” (branches) all branch-specifi c product news and in-depth articles are found related to photovoltaics, wind energy, shipbuilding, smart grids and packaging.
3 Target Group: www.etz.de provides engineers and technicians in the fi eld of discrete manufacturing &
machine automation, electrotechnical and supply industry valued information as a basis for the decision making process in their professional fi eld.
4 Publishing House: VDE VERLAG GMBHKaiserleistraße 8 A · 63067 Offenbach · Germanywww.vde-verlag.de
Editors: Dipl.-Ing. Ronald Heinze, Editor-in-ChiefDipl.-Ing. Frank Nolte, Deputy Editor-in-ChiefPhone +49-69-84 00 06-13 31, Fax -13 98Email [email protected]
Online Advertising: Ronny Schumann, Advertising ManagerPhone +49-69-84 00 06-13 40, Fax -13 98Email [email protected]
Media Kit Website
Profi leSubhead
1Super Banner728 × 90 Pixel
Page Peel500 × 500 Pixel
Wide Skyscraper160 × 600 Pixelor Skyscraper120 × 600 Pixel
Medium Rectangle II300 × 250 Pixel
Full Banner Premium468 × 60 Pixel
Billboard Banner960 × 250 Pixel
Full Banner Top468 × 60 Pixel
Medium Rectangle I300 × 250 Pixel
Full Banner Base468 × 60 Pixel
Media Kit Newsletter27
2020
1 Name: etz Newsletter
2 Short Summary:
The PDF Newsletter gives its readers short informations on brand-new products, technical articles, news and events in the industry sectors Electrical Engineering, Automation and drive technology, Process and Electric Power Industry as well as Test and Inspection Techniques. Each information is linked to more detailed information on our website giving a fast in-depth approach to the subject.
3 Target group:
The etz Newsletter provides engineers and technicians in the fi eld of discrete manufacturing & machine automation, electrotechnical and supply industry valued information as a basis for the decision making process.
4 Frequency: monthly
Publication Dates:• 1/2020: 29.01.2020• 2/2020: 26.02.2020• 3/2020: 25.03.2020• 4/2020: 29.04.2020• 5/2020: 27.05.2020• 6/2020: 24.06.2020• 7/2020: 29.07.2020• 8/2020: 26.08.2020• 9/2020: 30.09.2020• 10/2020: 28.10.2020• 11/2020: 18.11.2020• 12/2020: 16.12.2020
5 Publishing House: VDE VERLAG GMBHKaiserleistraße 8 A · 63067 Offenbach · Germanywww.vde-verlag.de
Editors: Dipl.-Ing. Ronald Heinze, Editor-in-Chief Dipl.-Ing. Frank Nolte, Deputy Editor-in-Chief Phone +49-69-84 00 06-13 31, Fax -13 98 Email [email protected]
Online-Advertising: Ronny Schumann, Advertising Manager Phone +49-69-84 00 06-13 40, Fax -13 98 Email [email protected]
newsletter 8/2019
Anzeige
Liebe newsletter-Leserinnen und -Leser,
die Zeit ist reif für einen Wandel. Das
scheinen sich jedenfalls einige Unter
nehmen in den letzten Monaten ge
dacht zu haben und sind dabei sich
zu ändern, beispielhaft sei hier nur
die neue Unternehmensstruktur von
Turck oder die neue Zentrale von RS
Components genannt.
Mehr darüber und zu dem was sich
sonst noch in der Welt der Automa
tion und Elektrotechnik im vergange
nen Monat ereignet hat sowie anste
henden Veranstaltungen, erfahren
Sie wieder in diesem etznewsletter.
Bei der Lektüre wünschen wir Ihnen
wieder viel Vergnügen, Ihr etzTeam Anzeige
Anzeige
IoT Analytics, Spezialist für Studien
und Marktübersichten rund um die
Themen Internet of Things (IoT),
M2M und Industry 4.0, hat Endan
wender nach ihren Erfahrungen mit
IoTPlattformen gefragt. Die Ergebnis
se wurden jetzt in dem 184Seiten
umfassenden IoT Platforms End User
Satisfaction Report 2019 veröffent
licht. Der Report will die Transparenz
in dem Markt für IoTPlattformen ver
bessern und ranked die Plattformen
(sowohl für die Telekommunikation
als auch für die Industrie) nach der
Kundenzufriedenheit basierend auf
über 800 Datenpunkten. mehr ...
Ranking der 25 besten IoT-Plattformen
Der globale Multi
ChannelAnbieter
von Produkten und
Lösungen aus dem
Bereich Industrie
und Elektronik, RS
Components (RS)
verlässt nach über
20 Jahren Mörfelden und zieht vom
Frankfurter Stadtrand in das pulsie
rende Herz der Mainmetropole. Ab
dem 1. September 2019 findet man
den Distributor im
„Atrium Plaza“
(Bild) in der Mainzer
Landstraße 180.
Als Schrittmacher
des B2B eCommer
ce findet RS Compo
nents in Frankfurt
am Main nicht nur das Umfeld für
zukünftiges Wachstum, der Umzug
steht auch im Zeichen einer geistig
kreativen Erneuerung. mehr ...
RS Components zieht nach Frankfurt/Main
Der AMA Verband für Sensorik und
Messtechnik (AMA) hat seinen Bran
chenführer 2019/20 veröffentlicht.
Die Broschüre (Bild) informiert auf
135 Seiten in mehr als 1.000 ver
schiedenen Kategorien über die Sen
soren, Messtechnik und Dienstleitun
gen der 450 Mitglieder aus Industrie
und Wissenschaft. Das Verbandsver
zeichnis ermöglicht In
teressierten die Suche
nach Messgrößen,
nach Schlagwörtern
oder die gezielte Suche
nach AMAMitgliedern,
die in alphabetischer Reihenfolge mit
Kontaktdaten und Sortiment abgebil
det werden. mehr ...
AMA veröffentlicht Anbieterübersicht
Im September 1969
gründeten Jörg R.
Martens und Fried
rich Hamacher die
ElektroVer triebs
Gesellschaft als In
dustrievertretung.
Kurz darauf stiegen
sie in das Distributionsgeschäft mit
Steckverbindern und elektromechani
schen Bauelementen ein. In diesem
Jahr blickt der ElektromechanikDis
tributor evg mit Stammsitz in Mön
chengladbach (Bild) auf eine 50jäh
rige Erfolgsge
schichte zurück.
Aktuell beliefert evg
rund 5.000 Kunden
mit einem Sorti
ment von über
60.000 Produkten
mar k t f üh rende r
Hersteller. Zu den Meilensteinen seit
der Jahrtausendwende zählen der
Neubau eines Logistikzentrums so
wie die Inbetriebnahme eigener
Spritzgießanlagen nebst Werkzeug
bau.mehr ...
50 Jahre evg
Title Ad (Head): 190 mm × 30 mm
1/8 page: 93 mm × 60 mm
Deadline for Ads: 7 days prior to publication date
1
Profi le
26
2020
Media Kit Website
1 File Formats: GIF, JPG, Flash (.swf), incl. fallback-GIF, max. 40 kB per fi le
2 Delivery Address: Please send your advertising material/fi les for your campaign to the following address: [email protected]
3 Delivery Deadline: 7 days before start of campaign
With this lead, we have enough time to test your fi les and to ensure a correct delivery of your campaign. Delays are otherwise not at our expense.
On delivering your fi les we need the following data:– customer name– campaign name– contact for questions/check back– Target-URL/Click-URL (not embedded in the .swf fi le)– Alt-Text/Title-Text (optional)
For Flash versions, we also need a GIF or JPG fi le as fallback of your advertising for users, who have no Flash installed.
Reporting: You can request an evaluation of ad impressions and ad clicks.
4 Contact: Leonie Ströver, Order ManagementPhone +49-69-84 00 06-13 42Email [email protected]
F
Formats and Technical Specifi cations
Super Banner728 × 90 Pixel
Page Peel500 × 500 Pixel
Wide Skyscraper160 × 600 Pixelor Skyscraper120 × 600 Pixel
Medium Rectangle II300 × 250 Pixel
Full Banner Premium468 × 60 Pixel
Billboard Banner960 × 250 Pixel
Full Banner Top468 × 60 Pixel
Medium Rectangle I300 × 250 Pixel
Full Banner Base468 × 60 Pixel
Media Kit Newsletter29
2020
1 File Formats: – Advertising for PDF newsletter: PDF fi les (Acrobat 8, all fonts
included, with at least 150 dpi CMYK pictures, no password protection) – Advertising for HTML Email: JPG, GIF (not animated),
max. 40 kB (72 dpi RGB picture fi les)
Please specifi y your target URL/link on delivery (e. g. your website)!
2 Format of the Newsletter: HTML, Text or PDF
3 Delivery Address: Please send your advertising material/fi les for your campaign to the following address: [email protected]
4 Delivery Deadline: 7 days before start of campaign
With this lead, we have enough time to test your fi les and to ensure a correct delivery of your campaign. Delays are otherwise not at our expense.
On delivering your fi les we need the following data:– customer name,– campaign name,– contact for questions/check back,– Target-URL/Click-URL,– Alt text/Title text (optional, only for the html email)
5 Contact: Leonie Ströver, Order Management Phone +49-69-84 00 06-13 42Email [email protected]
F
Formats and Technical Specifi cations
Title Ad (Head): 190 mm × 30 mm
Anzeige
Anzeige
Seit dem 1. August 2019 zeichnet der Ge-schäftsführer in der VDE-Gruppe, Wolfgang Niedziella (57) auch für das neu geschaffene Kompetenzcenter „Digitale Sicher-heit“ im VDE verantwortlich. In sei-ner Position führt der Elektroingeni-eur die in der VDE-Gruppe verteilten Kernkompetenzen – CERT@VDE von VDE/DKE, Smart Technologies vom VDE-Institut sowie Corporate Securi-ty vom VDE – zu einem organisa-tionsübergreifenden Geschäftsfeld zusammen. mehr ...
Neuer VDE-Leiter „Digitale Sicherheit“
Mit einer stärkeren Trennung der Gruppe in die Sparten Automati-sierungstechnik sowie Entwicklungs- und Pro-duktionsdienstleistun-gen will Turck sein Wachstum nach-haltig stärken. So sollen die Entwick-lungs- und Produktionskapazitäten mit der Fokussierung auf Technolo-gie-Schwerpunkte an bestimmten Standorten international ausgebaut werden. Christian Wolf (Bild), Ge-schäftsführer der Turck-Holding: „Wir wollen in Europa, Asien und Amerika optimale Strukturen für Produktion, Logistik und Vertrieb schaffen, um die lokalen Kundenbedürfnisse ideal abdecken zu können.” mehr ...
Neue Struktur bei Turck
Auf der Fachmesse Husum Wind ver-anstaltet der VDE VERLAG am 11. September 2019 in Halle 1 (1E16) das Forum „Innovative Steuerungs-technik und Predictive Maintenance für Windkraftanlagen“. Hier berich-ten hochkarätige Referenten aus Wirtschaft und Wissenschaft über die Themen Digitalisierung, Big Data und Cloudlösungen für Windkraftan-lagen. Das Themenfeld spannt den Bogen von intelligenter Rotorblatt-überwachung über steuerungsinte-griertes Condition Monitoring bis zu digitalen Services und datengestütz-ten Wartungskonzepten. mehr ...
Forum auf der Husum Wind
Vom 7. bis 10. Okto-ber 2019 zeigt die Section Factory Au-tomation von Yama-ha Motor Europe auf der Motek in Stuttgart Technologien zur Beschleunigung von Robotik-Pro-zessen, einschließlich der visuellen On-the-Fly-Inspektion und -Ausrich-tung. Auf dem Stand 7328 in Halle 7 können sich die Besucher u.a. über die Linear-, Mehrachs- und Scara-Roboter sowie die kartesischen Ro-
boter informieren, die es in vielen Grö-ßen und Konfigura-tionen gibt. Die auf der Messe ausge-
stellte Demonstration (Bild) läuft auf dem preisgünstigen Scara-Roboter YK-400XR und zeigt die Unterschiede des Hochgeschwindigkeitssystems gegenüber konventioneller Bildverar-beitung auf, durch die Zeiteinsparun-gen und Produktivitätsvorteile reali-siert werden. mehr ...
Yamaha zeigt Visionsystem auf der Motek
Die Harmonic Drive AG in Limburg hat mit den Hohlwellenservoantrieben der Baureihe Canis Drive den Spagat zwischen Kompaktheit und Perfor-mance erfolgreich gemeistert. Auf der etz@Tour erfuhr Frank Nolte von Ekrem Sirman Präsident und CEO der
Harmonic Drive AG was den Spezia-listen für Wellgetriebe auszeichnet sowie mehr über die Eigenschaften dieser besonderen Getriebe und über den Wandel vom Komponentenliefe-ranten zum Lösungsanbieter für hoch-präzise Antriebstechnik. mehr ...
etz@Tour bei Harmonic Drive in Limburg
Der Verwaltungsrat von ABB hat Björn Rosen-gren (Bild) einstimmig zum Chief Executive Officer ernannt. Er wird am 1. Februar 2020 bei ABB eintreten und CEO Peter Voser in dieser Funktion am 1. März 2020 ablösen. P. Voser wird ab die-sem Zeitpunkt bei ABB wieder aus-schließlich das Amt des Verwaltungs-ratspräsidenten ausüben. B. Rosen-gren: „Ich fühle mich sehr geehrt, bei ABB als einem echten globalen Tech-nologieführer diese faszinierende Aufgabe übernehmen zu dürfen. In einer für die Fertigungsindustrie so entscheidenden Zeit muss ABB auch künftig die Bedürfnisse globaler Kun-den bedienen.“ mehr ...
Neuer CEO bei ABB
Die Eltefa findet ab 2021 in der Ta-gesfolge von Dienstag bis Donners-tag statt. Auf Wunsch von Ausstellern und Besuchern rückt der Veranstalter den Branchentreff für das baden-württembergische Elektrohandwerk vom Freitag in die Wochenmitte. Zu-dem findet die Eltefa 2021 vom 20.
bis 22. April und damit vier Wochen später als bisher statt. Grund ist die komplette Auslastung des Stuttgar-ter Messegeländes im Jahr 2021 in den messestarken Monaten Februar und März. Ab 2023 ist der gewohnte Termin in der zweiten Märzhälfte ga-rantiert. mehr ...
Eltefa wechselt ab 2021 die TagesfolgeAnzeige
1/8 page horizontal: 190 mm × 30 mm
1/8 page:93 mm × 60 mm
1/4 page:93 mm × 120 mm
Mit einer stärkeren Trennung der Gruppe in die Sparten Automatisierungstechnik sowie Entwicklungs- und Produktionsdienstleistungen will Turck sein Wachstum nachhaltig stärken. So sollen die Entwicklungs- und Produktionskapazitäten mit der Fokussierung auf Technologie-Schwerpunkte an bestimmten Standorten international ausgebaut werden. Christian Wolf (schäftsführer der Turck-Holding: „Wir wollen in Europa, Asien und Amerika optimale Strukturen für Produktion, Logistik und Vertrieb schaffen, um die lokalen Kundenbedürfnisse ideal abdecken zu können.”
Neue Struktur bei Turck
1/8 page horizontal: 190 mm × 30 mm
93 mm × 60 mm
newsletter 8/2019
Anzeige
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Mehr darüber und zu dem was sich sonst noch in der Welt der Automation und Elektrotechnik im vergangenen Monat ereignet hat sowie anstehenden Veranstaltungen, erfahren Sie wieder in diesem etznewsletter. Bei der Lektüre wünschen wir Ihnen wieder viel Vergnügen, Ihr etzTeam
Anzeige
Anzeige
IoT Analytics, Spezialist für Studien und Marktübersichten rund um die Themen Internet of Things (IoT), M2M und Industry 4.0, hat Endanwender nach ihren Erfahrungen mit IoTPlattformen gefragt. Die Ergebnisse wurden jetzt in dem 184Seiten umfassenden IoT Platforms End User Satisfaction Report 2019 veröffentlicht. Der Report will die Transparenz in dem Markt für IoTPlattformen verbessern und ranked die Plattformen
(sowohl für die Telekommunikation als auch für die Industrie) nach der Kundenzufriedenheit basierend auf über 800 Datenpunkten. mehr ...
Ranking der 25 besten IoT-Plattformen
Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
den Distributor im „Atrium Plaza“ (Bild) in der Mainzer Landstraße 180. Als Schrittmacher des B2B eCommerce findet RS Components in Frankfurt
am Main nicht nur das Umfeld für zukünftiges Wachstum, der Umzug steht auch im Zeichen einer geistigkreativen Erneuerung. mehr ...
RS Components zieht nach Frankfurt/Main
Der AMA Verband für Sensorik und Messtechnik (AMA) hat seinen Branchenführer 2019/20 veröffentlicht. Die Broschüre (Bild) informiert auf 135 Seiten in mehr als 1.000 verschiedenen Kategorien über die Sensoren, Messtechnik und Dienstleitungen der 450 Mitglieder aus Industrie und Wissenschaft. Das Verbandsver
zeichnis ermöglicht Interessierten die Suche nach Messgrößen, nach Schlagwörtern oder die gezielte Suche nach AMAMitgliedern, die in alphabetischer Reihenfolge mit Kontaktdaten und Sortiment abgebildet werden. mehr ...
AMA veröffentlicht Anbieterübersicht
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der ElektromechanikDistributor evg mit Stammsitz in Mönchengladbach (Bild) auf eine 50jäh
rige Erfolgsgeschichte zurück. Aktuell beliefert evg rund 5.000 Kunden mit einem Sortiment von über 60.000 Produkten mar k t f üh rende r
Hersteller. Zu den Meilensteinen seit der Jahrtausendwende zählen der Neubau eines Logistikzentrums sowie die Inbetriebnahme eigener Spritzgießanlagen nebst Werkzeugbau. mehr ...
50 Jahre evg
1/8 page horizontal: 190 mm × 30 mm
1/8 page:93 mm × 60 mm
Liebe newsletter-Leserinnen und -Leser,die Zeit ist reif für einen Wandel. Das scheinen sich jedenfalls einige Unternehmen in den letzten Monaten gedacht zu haben und sind dabei sich zu ändern, beispielhaft sei hier nur die neue Unternehmensstruktur von Turck oder die neue Zentrale von RS Components genannt.
Der globale MultiChannelAnbieter von Produkten und Lösungen aus dem Bereich Industrie und Elektronik, RS Components (RS) verlässt nach über 20 Jahren Mörfelden und zieht vom Frankfurter Stadtrand in das pulsierende Herz der Mainmetropole. Ab dem 1. September 2019 findet man
RS Components zieht nach Frankfurt/Main
Im September 1969 gründeten Jörg R. Martens und Friedrich Hamacher die ElektroVer triebsGesellschaft als Industrievertretung. Kurz darauf stiegen sie in das Distributionsgeschäft mit Steckverbindern und elektromechanischen Bauelementen ein. In diesem Jahr blickt der Elektromechaniktributor evg mit Stammsitz in Mönchengladbach (
50 Jahre evg
1/8 page horizontal: 190 mm × 30 mm
468 × 60 Pixel or Advertorial
468 × 250 Pixelor
468 × 60 Pixel
468 × 60 Pixel
468 × 60 Pixel
Media Kit Newsletter28
2020
1 Advertising Sizes and Prices
Newsletter Announcement (HTML email)
Format Width × Height in pixel
Price
Premium Banner 468 × 250 € 2,950.–
Full Banner 468 × 60 € 1,125.–
Advertorial* max. 250 char. + picture + link € 1,340.–
Title Page of the PDF Newsletter
Format Width × Height in pixel
Price
Title Ad (Head) 190 × 30 € 790.–
1/8 page (center) 93 × 60 € 710.–
1/8 page (bottom) 190 × 30 € 710.–
Metrics
1 Subscribers: users, planers and suppliers of innovative solutions for the industry automation and persons responsible in the Management of industrial IT and industrial production.
2 Distribution: 11,882 recipients (as of September 2019)
On the Following Pages of the PDF Newsletter
Format Breite × Höhe in mm
Preis
1/4 page 93 × 120 € 680.–
1/8 page 93 × 60 € 460.–
1/8 page horizontal 190 × 30 € 460.–
Advertorial*
1/8 page (max. 630 char. + picture)
1/4 page (max. 1.350 char. + picture)
1/2 page (max. 2.200 char. + picture)
1/1 page (max. 5.700 char. + 2 pictures)
€ 520,–€ 925,–€ 1,630.–€ 2,715.–
* We only need your text, the picture(s), and the web link. We will then take care of the layout of the advertorial. A detailed information sheet is available upon request.
2 Discounts: –
3 Terms of Payment Weberbank Actiengesellschaft, Berlin, Acc. No. 6 123 549 039,
BIC 101 201 00, IBAN DE 36 1012 0100 6123 5490 39,SWIFT/BIC WELADED1WBB
UniCredit Bank AG, Berlin, Acc. No. 2 668 386, BIC 100 208 90, IBAN DE 78 1002 0890 0002 6683 86, SWIFT/BIC HYVEDEMM488
Payments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.
P - N
Advertising Rates/ Metrics
Professional Journals
139 years of media expertise at your service
We know your company, your products and the target market. That makes the real difference in successful marketing. We provide a fi rst-class editorial environments for your advertisements (print & online) and achieve effective positioning for you in the market.
The ReportCorporate Publishing
Tell your clients about your products and solutions with the report
Advantages:
• independent title• medium in a neutral design creates confi dence• high-quality editorial staff• complete project development through the VDE VERLAG• image transfer• new: digital valorization• plus extensive promotion package
1
E4BR01Zap Titel Seite 1
etz-Report 39 www.etz.de
A810
0
STRATEGIEINTERVIEW
Immer ein bisschen Mehr bieten
DAS M1-SYSTEM
Hoch integriert, robust und
leistungsfähig
APPLIKATIONEN
Rund um Wind, Industry, Maritime
und Erneuerbare Energien
etz-Report 39www.etz.de
Eine Publikation in Zusammenarbeit mit Bachmann electronic
Engineeringzeiten
reduzieren
PartnerSpecialCorporate Publishing
Show editorial strength with the partner special
Advantages:
• your own editorial spread• inside title page• layout handled by the VDE VERLAG• no advertisement/no competition• interview appointment• high reach through additional e-paper
App Design
Additional media channel via content app
• content: e. g. etz report • additional benefi t: rich media content like videos
picture galleries, web links• We develop the entire project for you• promotion package
Advantages:
• additional channel for the report• increased distribution• reaching further user groups• ideal medium for sales support
Note: Your clients can get the app free of charge for iPad, iPhone, iPod touch and Android.
Distribution:
– as bound-in insert in a professional journal
– offprint for your company (500 issues)
– e-paper on our online platforms
– editorial notice for the e-paper
in our newsletters
Social Media
Your news and information in social media
As professional partners, we create the right content, and place news and up-to-date information on social media channels. Thus, you and your products generate more attention.
Advantages:
• outsourcing the topic of social media maintenance
• professional partner• more attention
SPECIAL: SMART ENERGY
Special Smart Energy
ENERGIEMESSGERÄTEWerkzeuge des Instandhalters NAHTLOSE INTEGRATIONElektrische Energieverteilung im Internet der Dinge
MODULARES SYSTEMIntelligenz in das Verteilnetz bringen
Bild
: PQ-
Plus
FERTIGUNGS- & MASCHINENAUTOMATION
24
www.etz.de 6/2018
Weltweite Bereitstellung der relevanten Daten
Ein cleveres Motormanagement setzten die Geräte der
EMM-Serie um. Sie bieten alle Vorteile einer modernen
Wirkleistungsüberwachung, schützen angeschlossene Lasten
wie Pumpen oder Stell- und Regelantriebe zuverlässig vor
Über- oder Unterlast und kontrollieren den Zustand konti-
nuierlich. Das eigentliche Schalten der Last führen die
Hybrid-Motorstarter aus, die bis zu vier Funktionen in
einem Gerät vereinen: Motorstart- und Wendefunktion bis
3 kW, Motorschutz gegen Überlast sowie einen Not-Halt bis
Performance Level PL e (Bild 6). Neben den Standardkom-
ponenten für die Parallelverdrahtung sind vernetzbare Vari-
anten erhältlich, die sich in Feldbusumgebun-
gen integrieren lassen. Die Vernetzung erfolgt
entweder über das sogenannte Interface-System
(IFS), das die jeweiligen Geräte über den Trag-
schienenbusverbinder (T-Bus) koppelt, oder
direkt über eine eingebaute IO-Link-Schnitt-
stelle. Beim Interface-System werden die Motor-
starter über ein Gateway, das beispielsweise für
Profinet, Profibus, Modbus/TCP, Ethernet/IP
und CANopen verfügbar ist, an die Steuerung
angeschlossen. Dabei lassen sich mehrere Mo-
torstarter über den T-Bus an das entsprechende
Gateway anbinden. Die Ansteuerung der Mo-
torstarter geschieht direkt über die Busleitung,
sodass digitale Ausgänge sowie die aufwendige
Parallelverdrahtung eingespart werden. Bei Be-
darf erhält der Anwender außerdem eindeutige
Zustandsmeldungen der Motorstarter, zum
Beispiel hinsichtlich des Ausfalls einer oder
mehrerer Phasen, einer Überlastwarnung und
-meldung, Unterlastmeldung, der Schaltspiel-
zahl oder des ak-tuell fließenden Motorstroms.
Eine Vernetzung über IO-Link beinhaltet die
gleichen Funktionen. In Zeiten von Industrie
4.0 werden so relevante Daten bereitgestellt und
Informationen über die in vernetzten Anlagen
eingesetzten Motoren weltweit zugänglich ge-
macht. Daraus ergeben sich Vorteile für die
Wartung, zumal die platzraubende Messtechnik
entfällt.
FazitSignale zwischen Steuerung und Feld entkop-
peln, Motoren, Pumpen und Ventile schalten,
Beleuchtungen aktivieren und deaktivieren,
Sensorsignale an die Steuerungen weiterleiten,
Sollwerte überwachen: Die Arbeitsfelder elektri-
scher Schaltgeräte sind vielfältig. Technologische
Entwicklungen in diesem Bereich, die Phoenix
Contact vorantreibt, werden dem Anwender
auch zukünftig einen Mehrwert bieten und den
Übergang in das digitale Zeitalter unterstützen.
Schon heute ist es möglich, die Schaltzustände
der weltweit verbauten einfachen Koppelrelais
über PLC Logic und die IoT-Plattform Profi-
cloud von Phoenix Contact zu erfassen. (mh)
Literatur[1] Phoenix Contact Electronics GmbH, Bad Pyrmont:
www.phoenixcontact.de/schaltenAutor
Dipl.-Ing. Udo Haumersen ist als Produkt-manager im Bereich Interface Components
für die Phoenix Contact Electronics GmbH
in Bad Pyrmont tä[email protected]
05 Mit seinem umfangreichen Zubehör erweist sich die Relais-Familie Rifline
Complete als passende Lösung für den industriellen Anwendungsbereich
06 Die Hybrid-Motorstarter Contactron vereinen bis zu vier Funktionen in
einem Gerät
Sour
ce: F
otol
ia
For Your Leadership in Communication: Content MarketingEstablished Brands and Media Modules
Tailored Information for Potential Clients
The Report
PartnerSpecial
Research
ProfessionalJournals
Corporate Publishing
App Design
Social Media
Business Talks /Webinars
Online Advisor
Microsite
Stand-Alone Newsletter
E-Paper
Digital Publishing
DIGITALFACTORYJOURNALopen
automationDas Fachmagazin für das Management
DAS FACHMEDIUM FÜR DEN ELEKTRO-PROFI
SPECIAL SECTION FOR RENEWABLE ENERGIESincluding
Your Contact:Ronny SchumannAdvertising Manager
Phone +49-69-84 00 06-13 40Fax +49-69-84 00 06-13 [email protected]
Content Marketing
Research
Customized Survey
• a customized survey developed in cooperation with your company
• execution of the survey with a renowned market research organization
• data is gathered in telephone interviews with etz readers (CATI interviews)
• evaluated and transmitted results
For example: level of product and brand awareness, competitive environment
Examples:– Do you know this company?
– Do you know this product?
– Which product do you associate with
this company?
Short Survey
Getting attention and gathering feedback, that is what you get out of our short surveys. You can ask our readers/users up to fi ve questions via our online platforms and newsletters.
Advantages:
• short-term survey • quick feedback• potential decision-making tool
Research ResearchCorporatePublishing
App Design Webinars Digital Publishing
Content media modules
Analysis of the current status
Performancemeasurement
Sample Campaign
Step 1 Step 2 Step 3
Complete Coverage of Automation and Electrical Engineering
Benefi t from Our Effective Media Modules
SONDERTEIL FÜR ERNEUERBARE ENERGIENinklusive
Elektroingenieure in der Projektierung, Planung,
Konstruktion und Entwicklung
Elektro-Handwerk
Planung undLeitung in der
Industrie
Produktions-leiter und
IT-Management
Technisches Managementund Unternehmensführung
Fertigungs-und Prozess-automation
Energie-verteilung
Gebäudeauto-mation
Electricalengineering
Electrical engineers in project development, planning, and construction
Technical management and corporate management
Assembly and process auto-
mation
Energy distribution
Buildingautomation
Production and IT Management
Planning and controlling
in industrial production
Online Advisor
The way important leads are generated
• continued development of market overviews in interactive online advisors (Pilot: IP20 IO Modules)
• guided navigation within product segments• guidance solutions according to changing needs• registration with request for contacting
Advantages:
• generating leads all throughout the year• reduced time and labor costs• ideal benefi t-cost-ratio (CPL)
Online advising for your own products
With an customized, qualifi ed online product guidance, you will generate a real added value for your clients. As experienced content producers for the automation industry, we know the market, your company and your products. We will take over content management for you, and, together with our strong partners, recognize to the technical implementation. That way, we will create an ideal guidance solution for your clients’ needs and open up new potentials for your sales and distribution.
Stand-AloneNewsletterDigital Publishing
irect information transfer to the key target group
• onely editorial news about your company• brief and concise overview:
new components, systems and solutions • special newsletter design (HTML)
of the respective professional journal
Advantages:
• editorial processing by our team• ideal for fast and direct marketing messages
MicrositeDigital Publishing
All information in one place on the microsite
• interviews• professional articles• editorial news• product videos• whitepapers• sample requests
Availability: up to 12 months online.
E-PaperDigital Publishing
We move your content into the spotlight
Apart from publishing your article in one of our professional journals, we will turn it into an optimized e-paper and we will also distribute your article via our newsletters and online platforms.
Business Talks / Webinars
We professionally organize your business talks
• professional production• presentation by independent editorial staff• live feed into the studio for the Q&A session• participation only after registration• view directly in the browser• no additional software required• extensive promotion package
General Terms of Business of VDE VERLAG GMBH for advertisements and third party inserts in magazines and books and for online advertising1. Area of ApplicationInsofar as nothing else is expressly confi rmed in writing by VDE VERLAG GMBH (“the Publisher”) all contractual relationships of each of the Publisher’s customers with the Publisher are governed solely by the following General Terms of Business. They are also solely binding when confl icting general terms of business of the Customer’s have not been explicitly rejected by the Publisher.
2. Defi nitions2.1. An advertisement is any promotional publication in printed materials or online offers of the Publisher.
2.2. An advertising order is a contract for publication of one or more advertisements of an advertiser or other person placing them on an online offer or in printed materials of the Publisher for the purpose of distribution. To become effective, such a contract must be confi rmed in writing by the Publisher.
2.3. A standard advertising contract is one with a term of 12 months.
2.4. Online advertising is, for example, advertising banners, pop-ups, white papers, webcasts, microsites, webinars, special interest and/or keyword placements on the Publisher’s online offers and in its electronic newsletters.
3. RebatesRebates on contracts with term of 12 months are based on the actual published scope of the advertisements during the 12 month period, insofar as the Publisher is not responsible for deviations from the agreed scope. In such a case the Customer shall pay the difference between the rebate granted in advance and the rebate as based on the actual scope of advertising.
4. Placement4.1. The Customer shall notify the Publisher in good time before the closing time for advertisements in the event that advertisements, inserts and other supplements are to be published in particular numbers, particular editions or in particular places of printed matter.
4.2. Such a notifi cation is made in good time if, assuming a normal course of business, the Customer can still be notifi ed in writing in the event that the Customer’s request cannot be carried out.
4.3. Placement requests for which a separate surcharge is not agreed are honoured solely at the Publisher’s free discretion.
4.4. If the Customer decides that contrary to the original order an advertisement is not to appear in a preferred location, then the Customer must notify the Publisher of this in writing at least 6 weeks before closing time for advertisements.
4.5. Online advertising is placed by the Publisher at its equitable discretion with due consideration given to the interests of the Customer. Insofar as nothing else is agreed, the Customer does not have a right to a particular placement within the Publisher’s online offers or newsletters.
5. Contents and Arrangement5.1. The Publisher is entitled to refuse to publish advertisements, inserts or other supplements, as well as online advertising, because of its contents, its origin or its technical form, insofar as its contents violate applicable law or public morals or publication would be unreasonable for the Publisher. A publication is unreasonable for the Publisher if, for example, inserts or other supplements can give readers the impression, through their form or design, that these are parts of the printed matter for which the Publisher is responsible, or, if they contain advertising from any third party. The Customer will be notifi ed of any such refusal to publish.
5.2. The publication of inserts and other supplements presupposes in principle that a sample has been submitted in advance.
5.3. Online advertising must be delivered by the Customer in accordance with the technical requirements of the Publisher no later than the deadline agreed in the order. The Publisher does not check whether or to what extent the advertising materials provided by the Customer are suitable for the Customer’s advertising purpose and are in keeping with the Customer’s needs. In the case of online advertising which due to its technical design allows collection and storage of usage data, the Customer assures that all such collection and storage of data is done in accordance with the statutory requirements (particularly those of the EU’s General Data Protection Regulation (GDPR)).
5.4. Advertisements and online advertising which due to their editorial design cannot be recognized as such can be made recogniz-able as such by a clear notice such as “Advertisement” that is added by the Publisher.
5.5. The Customer warrants that the advertising materials supplied by the Customer as well as any linked target sites do not violate applicable law, and do not compromise or violate any rights of any type of any third party. In particular, the Customer warrants that the advertising materials are designed so that (a) the impression of a system message cannot arise and (b) all functional elements (e. g. search screens, pop-up menus, selection boxes) can actually be activated.
5.6. The Customer is responsible for timely delivery of printing materials. The Publisher’s obligation to keep printing materials expires three months after the advertisement was published.
5.7. If the Customer does not notify the publisher of any dimensions for the advertisement, the Publisher will execute it in the smallest format that is possible.
5.8. The Customer assures that it is the holder of all required usage and exploitation rights to the advertisements and grants the Publisher a usage right to the advertising materials that is simple, non-exclusive, non-transferable, worldwide, and limited in time to the period and in contents to the purpose of the contract. The Customer agrees to indemnify the Publisher upon fi rst demand of all claims of third parties that assert a violation of rights and to render the Publisher compensation for all disadvantages and damages the Publisher sustains in this connection.
6. Publisher’s Warranty and Liability6.1. The Publisher warrants the print quality customary for orders of the type in question, in the context of the possibilities prescribed by the printing materials. If the printed advertisement is entirely or partially illegible, incorrect or incomplete, and if the Publisher is responsible for this, then the Customer shall have a right, as the Customer may choose, to a reduction in the price of the adver-tisement or to a replacement advertisement unless a replacement advertisement would be possible only at disproportionate costs.
6.2. The Publisher shall place online advertisements during the agreed period of time and keep the relevant websites available. The Publisher warrants that the website(s) on which online advertisements appear are available at least 161 hours per week. If, during the period of the contract, this availability stays behind what is contractually agreed, then the Customer shall be entitled to a reasonable reduction of the price. This does not apply if the inferiority of performance is insignifi cant.
6.3. The liability of the Publisher for compensation for damages is limited to intention and gross negligence, insofar as there is no loss of human life, bodily injury or damage to health and insofar as there is no violation of essential contractual obligations. In cases of slightly negligence violations of essential contractual obligations, the Publisher is liable only for the amount of damages that are typical of this type of contract and that could be foreseen when the contract was concluded. Liability of the Publisher for slightly negligent violations of non-essential obligations is barred.
6.4. The Publisher is liable for damages which arise from malfunctions of internet lines, servers or other facilities only to the extent that such malfunctions lie within the Publisher’s sphere of responsibility.
7. ProofsProofs are delivered only at the express request of the Customer. The Customer bears the risk that proofs are not delivered in time and that returned corrected proofs are not correct. If the corrected proofs are not received by the Publisher within the period of time specifi ed by the Publisher, then permission to print will be deemed to have been granted when this period of time for receiving corrected proofs has expired.
8. Specimen CopiesAfter publication, the Customer shall receive a complete copy as documentary evidence. With job and occasional advertisements, the page on which the advertisement appeared will be sent as documentary evidence. If it is no longer to procure a specimen copy, the Publisher will certify in writing that the advertisement was published.
9. Prices9.1. All prices are stated as net prices in addition to which the applicable statutory value added tax is to be paid.
9.2. Price changes that occur during the period of a 12 month contract with a company go into effect immediately, insofar as nothing else was already agreed.
9.3. The preparation of drawings, printing materials and signifi cant changes in submitted printing materials are charged at cost.
9.4. Insofar as nothing else is agreed, online advertising is offered at monthly fi xed prices. The Publisher does not guarantee parti-cular levels of click rates, ad impressions, leads or other access statistics.
10. Review of Online AdvertisingWhen online advertising is broadcast for the fi rst time, the Customer will review it without delay for proper placement and report any errors to the provider within three working days. Online advertising to which no objections are raised within this period is deemed to have been accepted.
11. Cancellation of Online Advertising11.1. Online advertising which has been ordered can be cancelled before the agreed date of fi rst broadcast. Cancellation must be made in writing.
11.2. Cancellations received more than 8 weeks before the date of fi rst broadcast are free of charge. Otherwise, the Publisher is entitled to invoice cancellation fees as follows:
– cancellation between 8 weeks and 4 weeks plus 1 day before fi rst broadcast: 50 % of the net order value,
– cancellation between 4 weeks and 1 week plus 1 day before fi rst broadcast: 75 % of the net order value,
– cancellation 1 week or less before fi rst broadcast: 100 % of the net order value.
12. Reduced Print RunsA reduced print run constitutes a defect that justifi es a price reduction only if the shortfall is 20 % or more with a print run of up to 50,000 copies. Then the price reduction is proportional to the shortfall.
13. Payment ConditionsPayments are due in full within 30 days. The Publisher reserves the right to demand advances from new customers.
14. Payment Default14.1. If payment is not received within 30 days after the date of fi rst appearance, then the Customer enters payment default even if there is no reminder. In a case of payment default by a customer which is an entrepreneur, the Publisher is entitled to charge a standard fee in the amount of 40 euros. This amount will be credited to compensation for damages in the event that the damages are based on the costs of collection. During the period of payment default, customers which are entrepreneurs are also charged default interest in the amount of 9 % above the base interest rate.
14.2. If the Customer is in payment default, the Publisher reserves the right to make further appearances of advertisements depen-dent on payment of advances even during an ongoing standard advertising contract.
15. Applicable Law and Place of Jurisdiction15.1. This contract is governed by the law of the Federal Republic of Germany.
15.2. The place of fulfi lment and jurisdiction for business with merchants, legal entities of public law and public law special funds is the legal domicile of the Publisher. If the place of residence or usual abode of the Customer is not known when litigation is fi led or if the Customer has moved his, her or its residence or place of usual abode to a location outside the area of applicability of the ZPO (German Code of Civil Procedure), then it is agreed that the place of jurisdiction is the legal domicile of the publisher.
16. Data ProcessingDuring the course of its business activity the Publisher uses a data processing system to process customer data in the framework prescribed by the EU’s General Data Protection Regulation (GDPR) as permissible. A data protection offi cer has been appointed by the Publisher.
17. Other RegulationsThe publisher does not take part in alternative dispute resolutions in front of consumer concilation boards.
AGB
34
2020
Media Kit
Your Contacts
Frank Nolte
Deputy Editor-in-Chief
Phone +49-69-84 00 06-13 20
Fax +49-69-84 00 06-13 98
Markus Hohl
Editor
Phone +49-69-84 00 06-13 22
Fax +49-69-84 00 06-13 98
Ronald Heinze
Editor-in-Chief
Phone +49-69-4 00 06-13 00
Fax +49-69-4 00 06-13 98
Inge Hübner
Editor
Phone +49-69-84 00 06-13 21
Fax +49-69-84 00 06-13 98
Ronny Schumann
Head of Advertising Department
Phone +49-69-84 00 06-13 40
Fax +49-69-84 00 06-13 98
Susanne Ney
Key-Account Manager
Phone +49-69-84 00 06-13 44
Fax +49-69-4 00 06-13 98
Kristina Lippmann
Order Management
Phone +49-69-84 00 06-13 43
Fax +49-69-84 00 06-13 98
Leonie Ströver
Order Management
Phone +49-69-84 00 06-13 42
Fax +49-69-84 00 06-13 98
Katja Hanel
Media Consulting
Phone +49-69-84 00 06-13 41
Fax +49-69-84 00 06-13 98
www.vde-verlag.de
VDE VERLAG GMBHKaiserleistraße 8 A63067 Offenbach · Germany
Phone +49 -69-84 00 06 -13 40, -13 41 or -13 42Fax +49 - 69-84 00 06 -13 98Email [email protected]
Subject to changes of prices and errors.The General Terms of Business of VDE VERLAG GMBH apply.
V1/
2020