BKLTECHNOLOGIESthe rimfire and airgun SCOPe mOunt SPeCialiStS

Finish off your latest rimfire or airgun & scope acquisition

with mounts from BKL designed to fit any standard 3/8 inch rimfire or 11mm airgun dovetails.

The strong one piece clamping base allows easy mounting of 1 inch and 30mm rifle or pistol scopes.

Patented Auto-Centering™ technology solves the problems created by varying mounting rail widths. Clamping legs move equally as the clamping screws are tightened keeping the scope centered on the rail.

YOur rimfire & airgun mOunt SPeCialiSt

Oversize mounting rails are no problem, the clamping screws can be switched to spreader holes to evenly push the clamping legs apart and allow the mount base to slide onto the dovetail.

Airgunners and Rimfire shooters can now also benefit from the multitude of Picatinny rail mounted optics and accessories with our Weaver/Picatinny to dovetail adaptor mounts.

BKL mounts are manufactured from aircraft grade aluminum alloy on state of the art machinery in Texas. They can be purchased at your local retailer and online at www.bkltech.com.

BKLTECHNOLOGIES

200 SERIES1” SCOPE

RINGS

100 SERIESDOVETAILRISERS

300 SERIES30MM SCOPE

RINGS

400 SERIES14MM RAIL

RINGS

500 SERIESPICATINNYADAPTORS

600 SERIESBUBBLELEVELSwww.bklteCh.COm

Weaver is a registered trademark of Blount and is used for reference only.Photographs, descriptions and other information are purely indicative. BKL reserves the right to change, modify or discontinue products or features at any time.

right Centering ClamP

mOunt/rail CenterlinemOunting rail

left Centering ClamP

left relief Cut

SCrew axiS

right relief Cut

autO-Centering™ Standard On all SerieS

ClamP SPreading CaPabilitYStandard On all SerieS

ClamP SCrew in SPreader POSitiOn

ClamPing hOleS

frOnt View Side View

100 SerieS dOVetail tO dOVetail riSer mOuntS fOr 3/8” and 11mm dOVetailS

bkl-167S 1” lOng dOVetail tri-mOunt riSer mOunt - matte SilVer bkl-169mb

4” lOng dOVetail tri-mOuntriSer mOunt - matte blaCk

bkl-167mb1” lOng dOVetail tri-mOunt riSer mOunt - matte blaCk

bkl-169S 4” lOng dOVetail tri-mOuntriSer mOunt - matte SilVer

bkl-173S 1-5/8” lOng dOVetail tri-mOunt

riSer mOunt - matte SilVer

bkl-173mb 1-5/8” lOng dOVetail tri-mOunt

riSer mOunt - matte blaCk

bkl-181S 0.6” lOng dOVetail tri-mOunt

riSer mOunt - matte SilVer

bkl-181mb 0.6” lOng dOVetail tri-mOunt

riSer mOunt - matte blaCk

w w w . b k l t e C h . C O mBKLTECHNOLOGIES

right Centering ClamP

SCrew axiS

right relief Cut

200 SerieS 1 inCh ring mOuntS fOr 3/8” and 11mm dOVetailS

bkl-254S4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte SilVer

bkl-257hmb .06” lOng dOVetail ringS

high - matte blaCk

bkl-254hmb 4” lOng CantileVer mOunt with 1-5/8” ClamPing length -high

matte blaCk

bkl-257mb 0.6” lOng dOVetail ringS

matte blaCk

bkl-253S 3” lOng CantileVer mOunt with

1- 5/8” ClamPing lengthmatte SilVer

bkl-257S 0.6” lOng dOVetail ringS

matte SilVer

bkl-254mb4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte blaCk

bkl-254d7mb 4” lOng drOP COmPenSated

CantileVer mOunt with 1-5/8” ClamPing length - matte blaCk

bkl-260S4” lOng unitized dOVetail mOunt

matte SilVer

bkl-260d7mb4” lOng drOP COmPenSated

dOVetail mOunt - matte blaCk

bkl-260mb4” lOng unitized dOVetail mOunt

matte blaCk

bkl-260hmb4” lOng unitized dOVetail mOunt

high - matte blaCk

bkl-253mb 3” lOng CantileVer mOunt with

1- 5/8” ClamPing lengthmatte blaCk

m a d e i n t h e u S a

200 SerieS adJuStableSCOPe mOuntS

1 inCh ring mOuntS fOr 3/8” and 11mm dOVetailS

bkl-261mb4” lOng rimfire unitized

dOVetail mOunt - matte blaCk

bkl-288mb4” lOng adJuStable dOVetail mOunt 1 inCh - matte blaCk

bkl-388mb4” lOng adJuStable dOVetail

mOunt 30mm - matte blaCk

bkl-278S1” lOng dOuble StraP OffSet dOVetail ringS - matte SilVer

bkl-261S4” lOng rimfire unitized

dOVetail mOunt - matte SilVer

bkl-263mb1” lOng dOuble StraP

dOVetail ringS - matte blaCk

bkl-274mb 0.6” lOng OffSet dOVetail ringS

matte blaCk

bkl-278mb1” lOng dOuble StraP OffSet dOVetail ringS - matte blaCk

bkl-263S1” lOng dOuble StraP

dOVetail ringS - matte SilVer

bkl-263hmb1” lOng dOuble StraP dOVetail ringS - high

matte blaCk

bkl-274S 0.6” lOng OffSet dOVetail ringS

matte SilVer

w w w . b k l t e C h . C O mBKLTECHNOLOGIES

the bkl adjustable mount system is a significant improvement over the traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a much lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws. available in 1 inCh or 30mm.

VertiCal adjustment knob

300 SerieS 30mm ring mOuntS fOr 3/8” and 11mm dOVetailS

bkl-300mb0.6” lOng dOVetail ringS

matte blaCk

bkl-301S1” lOng dOuble StraP

dOVetail ringS - matte SilVer

bkl-300S0.6” lOng dOVetail ringS

matte SilVer

bkl-301mb1” lOng dOuble StraP

dOVetail ringS - matte blaCk

bkl-302mb1” lOng dOuble StraP OffSet dOVetail ringS - matte blaCk

bkl-303S0.6” lOng dOVetail

ringS - lOw - matte SilVer

bkl-354S4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte SilVer

bkl-302S1” lOng dOuble StraP OffSet dOVetail ringS - matte SilVer

bkl-303mb0.6” lOng dOVetail

ringS - lOw - matte blaCk

bkl-354mb4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte blaCk

bkl-360S4” lOng unitized

dOVetail mOunt - matte SilVer

bkl-374mb0.6” lOng OffSet

dOVetail ringS - matte blaCk

bkl-360mb4” lOng unitized

dOVetail mOunt - matte blaCk

bkl-374S0.6” lOng OffSet

dOVetail ringS - matte SilVer

m a d e i n t h e u S a

400 SerieS1 inCh ringS, mOuntS &

adaPtOrS fOr 14mm dOVetailS

500 SerieSdOVetail t0 weaVer/PiCatinnY

adaPtOr mOuntS

600 SerieSSCOPe leVel SYStemS

bkl-460mb4” lOng unitized

dOVetail mOunt - matte blaCk

bkl-463mb1” lOng dOuble StraP

dOVetail ringS - matte blaCk

bkl-456mb1” lOng

weaVer/PiCatinnYadaPtOr-matte blaCk

bkl-466mb1” lOng tri-mOunt

mOunt - matte blaCk

bkl-454mb4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte blaCk

bkl-600mb12 waY fOlding SCOPe leVel

fOr 1” SCOPeSmatte blaCk

bkl-610mb12 waY fOlding SCOPe leVel

fOr 30mm SCOPeSmatte blaCk

bkl-620mbring mOunt leVel

(alSO fitS bkl riSerS and adaPtOrS)matte blaCk

bkl-568mb4” lOng adaPtOr mOunt

matte blaCk

bkl-558mb4” lOng rimfire adaPtOr mOunt

matte blaCk

bkl-566mb1” lOng adaPtOr mOunt

matte blaCk

w w w . b k l t e C h . C O mBKLTECHNOLOGIES

bkl-620 ring mount level attaches easily

bkl-554mb4” lOng CantileVer mOunt with

1-5/8” ClamPing lengthmatte blaCk

P.O. bOx 2478 | fOrt wOrth, tx 76113 | 877.255.2001 | fax 817.451.1613 | www.bklteCh.COm

BKLTECHNOLOGIES