buckley reservoir airgun
TRANSCRIPT
![Page 1: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/1.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 1/109
Buckley Reservoir Airgun
The plan is to build three working rifles based on Buckley's reservoir design.
The build of this airgun will be presented on this page with updates as I can make
them.
Changes have been made from the books design and I have incorporated someideas
of my own.Get your own copy of the book - Buckley Reservoir Airgun Book
March 9 - 2009
I added a few CAD pictures of the concept4 rifle. I tried to make the barrel a dark
blue, but by the time it was converted appears medium blue. Included some
pictures
of the barrels and airtank. I had ordered four feet of 5/8" aluminum. A to much as
I laid out how I can cut the parts and will be able to get six gun bodies from the piece if required. I have aluminum for the action blocks, just need to cut it to size.
Hoping to get going one some of the parts this week and may have to wait till next
week
when I will have more time??.
I have changed the screws from socket head cap screws to slotted stainless
machine screws.
![Page 2: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/2.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 2/109
13cu inch, 3000PSI, air tank and 1400 PSI regulator.
![Page 3: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/3.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 3/109
German made barrels. Very wide grooves and narrow lands.
![Page 4: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/4.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 4/109
The aluminum gun body material.
March 7 - 2009 After weeks of designing and reviewing Mr. Buckley's design, I took the time to
create a CAD version of the rifle. I then changed the design to improve the
cosmetics
of the rifle. Taking design cues from other rifles and the CP Sport pistol. The
airgunSchaefer built has also played a role in my design. Link below the pistol picture.
![Page 5: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/5.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 5/109
Schaefer - Modern Stock Reservoir Airgun Page
I have ordered most of the materials to build this rifle. Aluminum, wood and
receivedthe air tank and regulator this past week. It allowed me to get the design more
complete.
Still deciding on what material to use on some parts. Thinking stainless, but it is
very
hard to machine. I have the barrels and enough to build one complete rifle. The two
others
will be completed without air tank at this time as cashflow is tight. Enjoy reading
about
the build!
The reason I call this Concept 4 is due to this being the 4rth design I haveconsidered. Here are a few CAD images of the proposed airgun. The butt stock
will see some changes, probably look more like one Scaeffer has on his. He
informed
me that the stock in teh book is to high and would require adjustment for each
individual to find the most comfortable spot on the shoulder. Compare the design
with Buckley's orginal and you will see how much can be done with this design.
![Page 6: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/6.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 6/109
Will be posting pictures of the build as I go along. I have been corresponding
with H.M. Buckley and for now will not be posting any detailed pictures, only the
overall construction.Some design and performance notes on my build:
* FPS = under 500 (for now)
* Length = 38.06" - Pending stock and barrel length changes* Construction materials - mostly aluminum, wood - walnut grips and forend stock
* Barrel Type & Caliber = .22 cal x 24 inch, made in Germany (from Mac1
Airguns) Blued and Crowned* Air Supply - 13 cubic inch, 3000 PSI tank and 1400 PSI regulator
* Color = Still researching, possibly anodized or black oxide finish
Concept4, Page 2 - "Buckley" Airgun
Details & Pictures Making the Airgun On this page will be showcasing the making of the airgun I designed using
Buckley's
reservoir design as a base. There are still a few things to be worked out in the
design
![Page 7: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/7.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 7/109
as I make the airgun. I was going to build three, but decided on two. The reason
being
I have enough material to make an additional two rifles and can finalize the design
and make
the others using all the improvements from the first two airguns.March 21 - 2009
Last night I worked till 9:30 pm. I had a chance to work on the actions for thetwo rifles I am making. Unfortunately I could not finish the 1.0 inch bore. We
have boring bars but do not work well in the mill. I would like to do it on the
lathe we have, but my dad isn't keen on switching chucks on a big lathe because ofaccuracy. So I may outsource the bore. I did finish the barrel bore. Got a good snug
fit between bore and barrel. Will be using three set screws and possibly some lock
tightwhen complete. Also, if I do get the aluminum parts anodized, I am sure that will
add
some material for a tighter fit?Action block for the airgun was placed in a vise. Proceeded to drilled through
under
size. I used a CNC mill so I could circle interpolate the holes. Basically make a
CAM program for the CNC machine to read and move the tool in a circular path.
![Page 8: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/8.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 8/109
![Page 9: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/9.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 9/109
Here I was checking the fit of the barrel. A few more thousands of an inch and
the barrel started to slide in. If I had taken one more thousands of an inch (0.001")
![Page 10: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/10.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 10/109
the barrel would have been to loose. Aluminum machines easily so really watch
your
increments when machining.
![Page 11: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/11.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 11/109
I need to make some changes on the grib-trigger mount. A little to wide for
comfort.
Will make those changes soon. I have added the copyright to all pictures. Mainly
to support Mr. Buckley's design, as well as the changes I have made. I am taking
more
pictures then I show and may use them to create my own book in the future with
complete
plans. Send me an email if that would be of interest. Thanks for reading.
March 14 - 2009 Got to the shop at 11:00 am. Worked on a customer job till 1:00 pm and then setup
to cut and square the aluminum blocks that will will be used for the actions of the
airguns. I had 1.5 X 4" alumium on hand, and only needed 1.5 X 3" so cut off an
inch
to save on machining and perhaps use the cutoffs for something else?
![Page 12: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/12.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 12/109
Action blocks for the air rifle squared up and milled to size.
Created a layout of the two trigger guard - grip frame. Helped in figuring out how
to mill the grip bodies. Most of our clamps for work holding were used up on our
big mill so I improvised using a vise.
![Page 13: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/13.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 13/109
Milling the trigger guard-grip frame profiles.
One trigger guard-grip frame profile complete. The other needs a little milling.
I ran out of time. Still need to create a recess for wood grips, screw holes, mill
slots etc.
![Page 14: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/14.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 14/109
Hoping I can get more done during the next week as time allows. Will try to
update this page weekly to show progress on the airgun making.
Concept4, Page 3 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 2. Showcasing the making of the airgun I designed using
Buckley's
reservoir design as a base.
March 28 - 2009
![Page 15: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/15.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 15/109
This past week I outsourced the 1.0" and 5/8 bore to a local machine shop. It
set me back a few dollars, but it is okay. If/when I build more airguns I will
invest in my own tooling. I am only showing one rifle in the pictures, but there
are duplicate parts.
I didn't have the time or means to bore 6" deep. The handles have been milled
to 0.625". Received the female quick coupler for the bottle, had to buy a set.
Ordered 5/8 brass rod for the probes. I bought all the stainless set screws and
screws
for these two rifles.
I have been thinking about the bottle adaptor. Think a steel part for prototyping
will be the way I go. To be followed with brass or stainless once the design is
sound and everything fits properly. More to come!
![Page 16: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/16.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 16/109
![Page 17: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/17.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 17/109
Concept4, Page 4 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 3. Showcasing the making of the airgun I
designed using Buckley's reservoir design as a base.
January 2010
During the Christmas holidays I had some parts made. The air tank thread is the
sameas a paintball gun and meets no commercial tap size. The company that lathed the
parts for me used stainless and glad they did as I was thinking of going brass. I
have
to finish the parts, but will hopefully get to it before the month is over. I will add
more
on these pages when I am able to do more work.
![Page 18: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/18.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 18/109
![Page 19: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/19.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 19/109
July 3, 2010
![Page 20: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/20.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 20/109
I had started the action block myself but had to source out the boring as I didn't
have the tooling necessary. Unfortunately the job shop messed up and I had them
redo
the bore for the bolt as it was 0.025" off center. It is now a perfect fit but doesn't
look as good as solid block. This was last year when this was done.
I finally did a little more work to the "Concept 4" project. I milled the slot for the
trigger in the trigger guard/handle. The screw holes also are now in place and needchamfering. I also machined the action block to fit the handle using a slot to keep
![Page 21: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/21.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 21/109
the
assembled gun tighter together rather then relying on screws alone. Spent about 7
hours
do the work and will be a few weeks before I can continue.
![Page 22: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/22.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 22/109
![Page 23: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/23.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 23/109
![Page 24: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/24.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 24/109
Concept4, Page 5 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 4. Showcasing the making of the airgun I
designed using Buckley's reservoir design as a base.
October 9, 2010
It is the thanksgiving long weekend in Canada and the wife is working nights. I
so I spent today and hopefully Monday working on this project. Setup and drilled
the remaining holes for mounting the valve, trigger and sear, and the spring
retainer.
![Page 25: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/25.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 25/109
I setup the action block and used one corner as my reference as you can see in the
CNC screen using an edge finder. I used the CNC mill as it is faster to move to
location
and have more tooling for then a manual. I used the CNC in manual mode and
drilled all theholes for mounting the valve body, the spring end holder, and trigger and sear
holes.
![Page 26: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/26.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 26/109
Drilling the holes for mounting the spring retainer. I drilled through to get both
sides
at the same time. Since the drill was sharp and using a high speed, I managed to get
the
hole straight and accurate. I checked with a caliper and was about 0.001" out. Can't beat
that when things go well machining.
The trigger and sear holes , I used a center drill to get the holes marked andspotted. Using
a caliper I scribed a line at the location for the holes. Works great for aluminum
and eventually
the action block will be milled to reduce the weight and scribed lines will be
machined away.
![Page 27: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/27.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 27/109
![Page 28: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/28.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 28/109
On the hand grip frame all the mounting holes where chamfered.
![Page 29: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/29.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 29/109
The bolt has a slot milled into it and requires a set screw that guides it. The screw
is stainless steel and harder to lathe but works. Once lathed I had to grind and retap
the end so that it would thread into the hole. I still may have to lathe it down a little
more when I go to finish the action block to its correct width.
![Page 30: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/30.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 30/109
I assembled the grip frame and action and made the spring retainer cap. Monday Iwill try to
finish off a few more parts. Like to get the airguns firing soon and then finish them
off.
![Page 31: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/31.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 31/109
October 11, 2010
On the Thanksgiving Monday I was able to work on the barrels and mounted the
valveon the action block. Here I show the lathing of the groove of the barrel and some
milled
flats that the set screws will hold the barrel in place.
![Page 32: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/32.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 32/109
![Page 33: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/33.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 33/109
![Page 34: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/34.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 34/109
Here the valve is tapped. I did one hole at a time to ensure that the holes would line
after. The tapped holes are shallow as I did not want to break through to the valve
and
have the possibility of loosing air or creating a danger.
I chamfered the holes to mount the valve and the spring holder on the front.
![Page 35: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/35.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 35/109
Here I show the air rifles as far as I with the build.
![Page 36: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/36.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 36/109
A couple of pictures the brass breech and the barrel with an O-ring seal.
![Page 37: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/37.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 37/109
Concept4, Page 6 - "Buckley" Airgun
Details & Pictures Making the Airgun
Continued from Page 5. Showcasing the making of the airgun Idesigned using Buckley's reservoir design as a base.
![Page 38: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/38.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 38/109
October 31, 2010
Here are pictures of some of the machining I did on October. I am far behind with
posting
pictures as I was to busy with machining and excited about how close I was to
being ableto fire the rifle.
First picture shows the drilling the port in both the action block and valve.
Valve body with screws in place and valve. Valve body is CNC machine andstainless. I had to polish
the inside against where the valve seats. One valve sealed on first attempt, still
hacing trouble
with second valve. I will have to make another plastic valve and see if that was theissue.
![Page 39: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/39.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 39/109
Here the slot for the hammer/striker handle is machined.I test fitted all the parts
and
seemed to fit well at that time.
Here is a close up of the hammer and spring end cover in the background. Buckleyuses a
very simple sear and trigger, with a groove in the hammer to set the sear into.
![Page 40: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/40.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 40/109
November 3, 2010
Here is a close up of both the valves. Spring end nut in place and plastic seal. Two
1/8 holes
transfer air from the bottle to the valve body. I am thinking of machining the inside
of the valve
to store a higher volume of air but not sure it is required. Perhaps later after I get
the rifle registeredI will rework the valve to push more volume to get a high FPS.
![Page 41: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/41.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 41/109
I made a very quick tool to be ablet o screw the nut into the valve body. At first I
was going to drill
four holes into the nut, but settled for two. If it needs more later I will add themthen. That is the reason
for the spot drill on the nut.
![Page 42: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/42.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 42/109
The valve body, valve, spring and spring retention nut layed out.
![Page 43: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/43.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 43/109
November 6, 2010
I began work on the trigger and sear. I used CAD/CAM software to create a program to mill
the outline of each.
![Page 44: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/44.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 44/109
Here is the semi finished look at the trigger and sear. From here I cut them out on a
band
saw and then used bench grinder to remove excess material. I also predrilled the
1/8 holes and drilled
them after.
I test fitted the sear and trigger using 1/8 drill bits. The extra trigger and sear are
laying
beside.
![Page 45: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/45.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 45/109
Charged the tank to 2100 PSI, thats all I have left in my scuba tank currently. I
used a
shoulder bolt for the handle and test fired the action with no barrel. After a
successful
test and ensureing the seal was working on the valve I continued.
![Page 46: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/46.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 46/109
The barrel installed and loading the first pellet.
![Page 47: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/47.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 47/109
Here is the result of the very first shot. There wasn't enough tension on spring to
get any
penetration. Made a small alteration and next two shots penetrated well.
![Page 48: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/48.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 48/109
Concept4, Page 7 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 6. Showcasing the making of the airgun I
designed using Buckley's reservoir design as a base.
November 13, 2010
Here are pictures of some of the machining I did on November. Rifles are almost
complete asmachining is concerned. I have to make the stock and add the wood. Then polish
all the aluminum
and do a final fit on all parts.
First picture I am taken off extra material and milling the action closer to final size.
Milling the 45 degree angle, before and after.
![Page 49: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/49.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 49/109
Here the grip area is milled to finished dimension.
![Page 50: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/50.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 50/109
Here I am milling the action block top area and the scope mount groove. Before
and after.
![Page 51: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/51.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 51/109
Test fitting a scope mount afer machining the grooves. Next picture the two actions
machined.
![Page 52: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/52.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 52/109
Setting up to mill a groove that will mount the aluminum stock arm. Before and
after pictures.
![Page 53: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/53.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 53/109
A final fitting with pins to guide the grip to action. You may notice an extra pin
along with
the brass pins for the sear and trigger. I had to add one to keep the trigger fromrotating
to far forward.
Machined the bolt and tapped a hole on the end. Then assembled with o-rings. I did
another
test fire and now waiting for time to finish the rifles.
![Page 54: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/54.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 54/109
I plan on adding one more page after this one to show the final completion of these
rifles. I may add more pages to detail how I make out with registering my rifle an
show thegroup shots I get. Thanks for viewing the pages.
Concept4, Page 8 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 7. Showcasing the making of the airgun I
designed using Buckley's reservoir design as inspiration.
Posted July, 2012
![Page 55: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/55.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 55/109
The following pages show a little more testing. Then after almost one year, I got
back into finishing
these rifles. First pictures are from November 27, 2010. No pictures in 2011 as I
did no work on airguns.
Did some shooting in my basement to see how the gun would work.
![Page 56: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/56.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 56/109
![Page 57: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/57.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 57/109
![Page 58: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/58.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 58/109
Target wasn't for maybe 30 feet.
Next series of pictures are taken this year. I finally started with the wood parts.
Starting in March 26, 2012.
![Page 59: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/59.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 59/109
![Page 60: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/60.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 60/109
![Page 61: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/61.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 61/109
A lot have hand filling the wood grips. I am not really a wood worker and own
very little toolingrelated to woodworking. I used basic files and a copy saw to trim the wood. Spent
![Page 62: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/62.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 62/109
a lot of hours trimming
filing to get the correct feel. Theast picture, had a thought about making a screw
adaptor to mount a
Airforce airtank inplace. But seems it might be rather long to accomidate.
Next group of pictures if from April 7, 2012During this day I reworked my valves. They simply did not seal well so I decided
to try the tapered plug
style that is common. Leaks were gone and seems to fire well. PIC 126B shows the
hand grib setup. I milledoff about 1/4" as the hand grip was just to wide. Made for a much more
comfortable feel afterwards.
Since the rifles were disassembled I decided to polish the aluminum. A good polishis hard to capture with
a camera but looks great! Remaining pictures are from more wood work. A neat
little trick, if you want anidea what the wood will look like finished use some mineral spirits or turpentine to
bring out the grain.
![Page 63: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/63.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 63/109
![Page 64: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/64.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 64/109
![Page 65: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/65.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 65/109
![Page 66: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/66.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 66/109
![Page 67: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/67.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 67/109
![Page 68: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/68.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 68/109
![Page 69: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/69.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 69/109
![Page 70: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/70.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 70/109
I did a little velocity testing on the airguns. First shot was very dissappointing as
you can seefrom the Chronograph, 39 FPS! Turns out that when I had put the rifles together I
had switched thevalve bodies and a slight mismatch blocked the airway.
Pictures taken April 9, 2012.
![Page 71: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/71.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 71/109
![Page 72: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/72.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 72/109
Concept4, Page 9 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 8. Showcasing the making of the airgun Idesigned using Buckley's reservoir design as inspiration.
Posted July, 2012
In May I got down to sanding the wood pieces after spending a lot of time filing
the hand grips. Getting
a smooth finish requires hours of sanding. I started with 150 grit, then 220, 400,and finished with 600.
I know another builder who will go to 800 grit paper and will sand a few times
between coats of linseed oil.
I found oiled linseed oil at a local retailer and having never used it to finish wood before, I had to basically jump
right into it. First coat applied looked great.
These pictures are from May 10, 2012.
![Page 73: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/73.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 73/109
![Page 74: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/74.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 74/109
![Page 75: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/75.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 75/109
![Page 76: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/76.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 76/109
I do not show every coating on the pictures. May 15 I was at the 5th or 6th coating.
Having sanded the wood
between each coating and rereading the instructions I found, I left more oil on the
wood and wiped off the excess.
Sure looks great when wet, to bad it doesn't stay that way when dry.
These pictures are from May 15, 2012.
![Page 77: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/77.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 77/109
![Page 78: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/78.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 78/109
![Page 79: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/79.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 79/109
![Page 80: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/80.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 80/109
![Page 81: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/81.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 81/109
Concept4, Page 10 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 9. Showcasing the making of the airgun I
designed using Buckley's reservoir design as inspiration.
Posted July 10, 2012
These pictures represent work I did on May 24 & 26, 2012. I modified the spring
cap that holds a 1/2" diameter
spring to be able to hold a 1" stiffer spring. I wanted to get the FPS (feet persecond) higher with minimal
effort. Turns out it actually got worse. My FPS went down to about 600 and when I
put in the original spring
was back up to 720. I will do a shoot string sometime to see just how consistant therifle is.
![Page 82: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/82.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 82/109
![Page 83: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/83.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 83/109
![Page 84: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/84.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 84/109
![Page 85: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/85.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 85/109
May turned out to be really cold this year. I took the rifle to my dad's shop to do
some indoor shooting. Wantedto determine the accuracy of this rifle. I set up to site in the scope in the picture
below. Since I hadn't
fired this gun awhile and removed the scope a few times I started at 36 feet. Not
bad for a first shot! I took
four more shots and moved to 72 feet.
![Page 86: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/86.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 86/109
![Page 87: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/87.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 87/109
![Page 88: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/88.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 88/109
Then moving the target out to 84 feet. I actually shot better at the further distance
as I settle down
some and relaxed. I am using Crosman Premiere HP 14.3, 22 Cal pellets. Accuracy
is not to bad.
![Page 89: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/89.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 89/109
![Page 90: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/90.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 90/109
![Page 91: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/91.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 91/109
One thing I noticed was the skirts were dinged on a lot of pellets. I had to weed
through to ones that looked
usuable and shot with them. Eventually will have to try JSB or better brand of
pellets in the future.
Concept4, Page 11 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 10. Showcasing the making of the airgun I
designed using Buckley's reservoir design as inspiration.
Posted July 10, 2012
Here are some pictures from the first real outdoor shooting I did with this rifle.Photo taken on June 30, 2012.
Target is out about 75 feet and let my nephews have a go at it.
![Page 92: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/92.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 92/109
![Page 93: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/93.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 93/109
Here are some pictures to show off the completed rifle! Three years is a long time
to build this rifle.
![Page 94: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/94.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 94/109
![Page 95: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/95.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 95/109
![Page 96: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/96.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 96/109
![Page 97: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/97.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 97/109
![Page 98: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/98.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 98/109
![Page 99: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/99.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 99/109
![Page 100: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/100.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 100/109
After nephews had paper punched a few holes I tried my gun vise, steady rest for 5shots. Lower right-hand target shows the results of 5 shots.
![Page 101: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/101.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 101/109
![Page 102: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/102.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 102/109
![Page 103: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/103.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 103/109
Concept4, Page 11 - "Buckley" Airgun
Details & Pictures Making the Airgun Continued from Page 11. Showcasing the making of the airgun I
designed using Buckley's reservoir design as inspiration.
Posted July 10, 2012 Here are some pictures from the first real outdoor shooting I did with this rifle.
Photo taken on July 9, 2012.
Target is out at 100 feet.
![Page 104: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/104.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 104/109
![Page 105: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/105.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 105/109
![Page 106: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/106.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 106/109
I shot the first three lower targets and then went on to shoot both upper corners. Imanaged to do a lot
better on them. With the first target and this one, I counted 50 shots. I started with
pumping my 13CU tank
to 3000 PSI. After 50 shots I was down to 2000 PSI. Will be a great gun to plinkwith!
![Page 107: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/107.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 107/109
![Page 108: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/108.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 108/109
I wanted to try a little further so moved the target out to 130 feet. Just over 40
yards. The center
target was shot at 130 feet and the four corners back at 75 feet. As you can see bythe quarter I placed
by the group, not to bad for not having real steady rest. Used the yellow measuring
tape to support the forend.
![Page 109: Buckley Reservoir Airgun](https://reader030.vdocuments.site/reader030/viewer/2022021323/577cc2121a28aba711942044/html5/thumbnails/109.jpg)
8/10/2019 Buckley Reservoir Airgun
http://slidepdf.com/reader/full/buckley-reservoir-airgun 109/109
This concludes the pictures or this build. Feel free to commentabout anything you have seen or would
like to know. Email is below. Thank you for following this
build. ~ Pedro