the new class of materials - pure dental laboratory€¦ · - the new class of materials system in...
TRANSCRIPT
Flexible and elastic like bone
- the new class of materials
S Y S T E M
in prosthetics
S Y S T E MThe material
BioHPP is sealed againsthumidity and comesin a transparent tube.The required quantitycan be dosed by the gram,looked up from the waxto BioHPP conversion chart.Only that amount of materialis used.
BioHPP10 g, REF 540F2PB1 10 g, REF 540F2PB1 20 g, REF 540F2PB220 g, REF 540F2PB2
Sprueing base and silicone ringSize 3 REF 360F2P16
Size 9 REF 360F2P20
Sprueing base singleSize 3 REF 360F2PT1
Silicone ringSize 3 REF 360F2PR3
Sprueing base singleSize 9 REF 360F2PT2
Silicone ringSize 9 REF 360F2PR9
Sprueing bases
Micro grain special investmentfor the for 2 press System.for 2 press System.for
Appropriate for speed orconventional burn out processes.
Easy devesting
Bresol for 2 pressfor 2 pressfor1000 ml REF 520F2PL1
Brevest for 2 Pressfor 2 PressforBox of approx. 7,35 kgincl. 1000 ml Bresol for 2 pressfor 2 pressforREF 570F2PV1
Investment liquidBrevest for 2 press for 2 press for
Disposable plungers for pressing the high performance polymer into the mould.Rounded at one end for smooth forwardmovement. Syncronized cooling processbetween plunger and investment material,no risk of chipping or cracks of polymer.Pressure resistant.Use once only.
for 2 press Basic Setfor 2 press Basic SetforThis Kit contains the basic equipmentfor immediate kick off. Ausgehend von der Größe der Modellation ist das BioHPP ausreichend für 5–7 Pressungen und enthält alle notwendigen Materialien.
for 2 press Basic Setfor 2 press Basic SetforREF 14000601
Disposable plunger25 pieces 20 mm REF 570F2P20
Content
1 x for 2 press pneumatic vacuum pressure unitfor 2 press pneumatic vacuum pressure unitfor1 x for 2 press mould (Mould system includes sprueing base size 3/16mmfor 2 press mould (Mould system includes sprueing base size 3/16mmforand silicone ring)35 x 210 g Brevest for 2 press investment powder incl. 1000 ml Bresol for 2 press investment powder incl. 1000 ml Bresol for for 2 press for 2 press forinvestment liquid)25 x for 2 press fi ller (disposable plunger size 16 mm for pressing of high for 2 press fi ller (disposable plunger size 16 mm for pressing of high forperformance polymer into the mould)20 g BioHPP, thermoplastic high performance polymer
Disposable plunger25 pieces 16 mm REF 570F2P16
bredent GmbH & Co.KG Weissenhorner Str. 2 · 89250 Senden · Germany
Tel. (+49) 0 73 09 / 8 72-4 40 Fax (+49) 0 73 09 / 8 72-4 44
www.bredent.com · e-mail [email protected]
Subject to changes 04/12 600 GB 2,5
The system componentsThe system components
Investment - brevest for 2 press 2 pressfor 2 pressforDisposable plunger Disposable plunger for 2 press fi ller 2 press fi ller for 2 press fi ller forfor safe pressing results
Silicone ringsSilicone ringsSilicone ring suitablefor the for 2 press mould.for 2 press mould.for
Easy and quick demoldingof set investment. Checkered inside, enlarged surface for effective evaporation during pre-heat process.
Mould system - Mould system - for 2 press mould 2 press mouldfor 2 press mouldforConsisting of sprueing baseand silicone ring.Available in 2 different sizes:3 and 9.
Tel. (+49) 0 73 09 / 8 72-4 40 · Fax (+49) 0 73 09 / 8 72-4 44 · www.bredent.com · e-mail [email protected]
What is ?What is ?
Material properties• Medical device class II a• white color suitable for fully anatomical use• can be veneered with conventional veneering composites (e.g. visio.lign) high esthetic appearance and individualization• n o abrasive effect on the remaining teeth enamel of opposing teeth is protected
• metal-free no ion exchange in the mouth, no discoloration• partially crystalline thermoplastic resin reinforced with ceramic particles to withstand extreme stress material is suitable as a substructure material
• has been used as implant material in human medicine for more 20 years long-term experience is ensured
C
O
O
n***
***
O
Using a tension-compression testing machine, the fully anatomical bridges and the bridges veneered with visio.lign were loaded until fracture occurred. The metal ball transmits the masticatory force!
What are the advantages and benefi ts of the use of ?
biocompatible Advantage: no metals in the oral environmentAdvantage: no metals in the oral environmentAdvantage:Benefi t: Especially suited for allergic persons, no interaction with other materials, no discoloration of gingivaBenefi t: Especially suited for allergic persons, no interaction with other materials, no discoloration of gingivaBenefi t:
tooth-colored Advantage: Fabrication of fully anatomical crowns and bridgesAdvantage: Fabrication of fully anatomical crowns and bridgesAdvantage:Benefi t: Natural esthetic appearanceBenefi t: Natural esthetic appearanceBenefi t:
abrasion-resistant Advantage: No signs of wear and tear of fully anatomical structuresAdvantage: No signs of wear and tear of fully anatomical structuresAdvantage:Benefi t: Extended durabilityBenefi t: Extended durabilityBenefi t:
torsional stability Advantage: Flexible like boneAdvantage: Flexible like boneAdvantage:Benefi t: Reduction of stress to the implant, long-term success
shock absorbing Advantage: Masticatory behavior similar to natural enamelBenefi t: Especially suited for implant wearers since the masticatory forces acting on the implant are absorbedBenefi t: Especially suited for implant wearers since the masticatory forces acting on the implant are absorbedBenefi t:
can be veneered Advantage: Can be used as substructure materialAdvantage: Can be used as substructure materialAdvantage:Benefi t: High esthetic appearance by individualizing with conventional veneering composites. Possibility of direct repair! Benefi t: High esthetic appearance by individualizing with conventional veneering composites. Possibility of direct repair! Benefi t:
Low investment costsFabrication process of metal-free and lightweight substructuresis familiar to dental technicians and dentists Precise fi t and individually adjustable Coverage of a comprehensive indication range Can be veneered with the visio.lign veneering system (composites)Perfectly matched system
Added value in the laboratory
Fast learning Quality, fl exibility Wide application range System concept Reliability within the process chain
Indications
• Fully anatomical restorations• Substructures for composite veneering (max. span is 2 pontics)
Future indications
with novo.lign veneers (visio.lign system) in situ
stands for stands for HHighigh P Performance erformance PPolymerolymer
Unlike framework materials used so far, BioHPP features elasticity adapted to the bone. Ceramic and NPM are about 20 times, gold and tita-nium about 10 times more rigid than bone material. This simila-rity with bone offers particular advantages especially for large-span substructures.
After masticatory simulation,
all bridges revealed slight traces of
abrasion at the contacts toward
the human antagonist but no damage
or decementing.
nDecrease in load without
visible damage
Basal crack formation
Fracture of sub-
structure
1 1,158 N 1,567 N -2 997 N 1,475 N -3 979 N 1,433 N -4 871 N 1,325 N -5 - 1,327 N -6 980 N 1,583 N -7 1,149 N 1,407 N -8 - 1,361 N -
Source: PD Dr. C. Kolbeck, PD Dr. M. Rosentritt, Dept. for Prosthetics, University of Regensburg
Comparison of elasticity of bone - substructure materials Logarithmic diagram
1,000,000
100,000
10,000
1,000
log
(e-m
odul
us)
[MPa
]
Bone Zirconium Gold NPM Titanium BioHPP
Spongiosa
Compact bone
Zirconium
Gold
NPMTitanium
Photo: Dental-Labor Harald Schwindt, Landau/Pfalz, Germany
Scientifi c studyScientifi c study
The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system?
• Secondary structures (telescopes, bars) and the fabrication of individual abutments are about to be approved.
Tel. (+49) 0 73 09 / 8 72-4 40 · Fax (+49) 0 73 09 / 8 72-4 44 · www.bredent.com · e-mail [email protected]
What is ?What is ?
Material properties• Medical device class II a• white color suitable for fully anatomical use• can be veneered with conventional veneering composites (e.g. visio.lign) high esthetic appearance and individualization• n o abrasive effect on the remaining teeth enamel of opposing teeth is protected
• metal-free no ion exchange in the mouth, no discoloration• partially crystalline thermoplastic resin reinforced with ceramic particles to withstand extreme stress material is suitable as a substructure material
• has been used as implant material in human medicine for more 20 years long-term experience is ensured
C
O
O
n***
***
O
Using a tension-compression testing machine, the fully anatomical bridges and the bridges veneered with visio.lign were loaded until fracture occurred. The metal ball transmits the masticatory force!
What are the advantages and benefi ts of the use of ?
biocompatible Advantage: no metals in the oral environmentAdvantage: no metals in the oral environmentAdvantage:Benefi t: Especially suited for allergic persons, no interaction with other materials, no discoloration of gingivaBenefi t: Especially suited for allergic persons, no interaction with other materials, no discoloration of gingivaBenefi t:
tooth-colored Advantage: Fabrication of fully anatomical crowns and bridgesAdvantage: Fabrication of fully anatomical crowns and bridgesAdvantage:Benefi t: Natural esthetic appearanceBenefi t: Natural esthetic appearanceBenefi t:
abrasion-resistant Advantage: No signs of wear and tear of fully anatomical structuresAdvantage: No signs of wear and tear of fully anatomical structuresAdvantage:Benefi t: Extended durabilityBenefi t: Extended durabilityBenefi t:
torsional stability Advantage: Flexible like boneAdvantage: Flexible like boneAdvantage:Benefi t: Reduction of stress to the implant, long-term success
shock absorbing Advantage: Masticatory behavior similar to natural enamelBenefi t: Especially suited for implant wearers since the masticatory forces acting on the implant are absorbedBenefi t: Especially suited for implant wearers since the masticatory forces acting on the implant are absorbedBenefi t:
can be veneered Advantage: Can be used as substructure materialAdvantage: Can be used as substructure materialAdvantage:Benefi t: High esthetic appearance by individualizing with conventional veneering composites. Possibility of direct repair! Benefi t: High esthetic appearance by individualizing with conventional veneering composites. Possibility of direct repair! Benefi t:
Low investment costsFabrication process of metal-free and lightweight substructuresis familiar to dental technicians and dentists Precise fi t and individually adjustable Coverage of a comprehensive indication range Can be veneered with the visio.lign veneering system (composites)Perfectly matched system
Added value in the laboratory
Fast learning Quality, fl exibility Wide application range System concept Reliability within the process chain
Indications
• Fully anatomical restorations• Substructures for composite veneering (max. span is 2 pontics)
Future indications
with novo.lign veneers (visio.lign system) in situ
stands for stands for HHighigh P Performance erformance PPolymerolymer
Unlike framework materials used so far, BioHPP features elasticity adapted to the bone. Ceramic and NPM are about 20 times, gold and tita-nium about 10 times more rigid than bone material. This simila-rity with bone offers particular advantages especially for large-span substructures.
After masticatory simulation,
all bridges revealed slight traces of
abrasion at the contacts toward
the human antagonist but no damage
or decementing.
nDecrease in load without
visible damage
Basal crack formation
Fracture of sub-
structure
1 1,158 N 1,567 N -2 997 N 1,475 N -3 979 N 1,433 N -4 871 N 1,325 N -5 - 1,327 N -6 980 N 1,583 N -7 1,149 N 1,407 N -8 - 1,361 N -
Source: PD Dr. C. Kolbeck, PD Dr. M. Rosentritt, Dept. for Prosthetics, University of Regensburg
Comparison of elasticity of bone - substructure materials Logarithmic diagram
1,000,000
100,000
10,000
1,000
log
(e-m
odul
us)
[MPa
]
Bone Zirconium Gold NPM Titanium BioHPP
Spongiosa
Compact bone
Zirconium
Gold
NPMTitanium
Photo: Dental-Labor Harald Schwindt, Landau/Pfalz, Germany
Scientifi c studyScientifi c study
The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system? The following are the advantages of the system?
• Secondary structures (telescopes, bars) and the fabrication of individual abutments are about to be approved.
Flexible and elastic like bone
- the new class of materials
S Y S T E M
in prosthetics
S Y S T E MThe material
BioHPP is sealed againsthumidity and comesin a transparent tube.The required quantitycan be dosed by the gram,looked up from the waxto BioHPP conversion chart.Only that amount of materialis used.
BioHPP10 g, REF 540F2PB1 10 g, REF 540F2PB1 20 g, REF 540F2PB220 g, REF 540F2PB2
Sprueing base and silicone ringSize 3 REF 360F2P16
Size 9 REF 360F2P20
Sprueing base singleSize 3 REF 360F2PT1
Silicone ringSize 3 REF 360F2PR3
Sprueing base singleSize 9 REF 360F2PT2
Silicone ringSize 9 REF 360F2PR9
Sprueing bases
Micro grain special investmentfor the for 2 press System.for 2 press System.for
Appropriate for speed orconventional burn out processes.
Easy devesting
Bresol for 2 pressfor 2 pressfor1000 ml REF 520F2PL1
Brevest for 2 Pressfor 2 PressforBox of approx. 7,35 kgincl. 1000 ml Bresol for 2 pressfor 2 pressforREF 570F2PV1
Investment liquidBrevest for 2 press for 2 press for
Disposable plungers for pressing the high performance polymer into the mould.Rounded at one end for smooth forwardmovement. Syncronized cooling processbetween plunger and investment material,no risk of chipping or cracks of polymer.Pressure resistant.Use once only.
for 2 press Basic Setfor 2 press Basic SetforThis Kit contains the basic equipmentfor immediate kick off.
for 2 press Basic Setfor 2 press Basic SetforREF 14000601
Disposable plunger25 pieces 20 mm REF 570F2P20
Content
1 x for 2 press pneumatic vacuum pressure unitfor 2 press pneumatic vacuum pressure unitfor1 x for 2 press mould (Mould system includes sprueing base size 3/16mmfor 2 press mould (Mould system includes sprueing base size 3/16mmforand silicone ring)35 x 210 g Brevest for 2 press investment powder incl. 1000 ml Bresol for 2 press investment powder incl. 1000 ml Bresol for for 2 press for 2 press forinvestment liquid)25 x for 2 press fi ller (disposable plunger size 16 mm for pressing of high for 2 press fi ller (disposable plunger size 16 mm for pressing of high forperformance polymer into the mould)20 g BioHPP, thermoplastic high performance polymer
Disposable plunger25 pieces 16 mm REF 570F2P16
bredent GmbH & Co.KG Weissenhorner Str. 2 · 89250 Senden · Germany
Tel. (+49) 0 73 09 / 8 72-4 40 Fax (+49) 0 73 09 / 8 72-4 44
www.bredent.com · e-mail [email protected]
Subject to changes 04/12 600 GB 2,5
The system componentsThe system components
Investment - brevest for 2 press 2 pressfor 2 pressforDisposable plunger Disposable plunger for 2 press fi ller 2 press fi ller for 2 press fi ller forfor safe pressing results
Silicone ringsSilicone ringsSilicone ring suitablefor the for 2 press mould.for 2 press mould.for
Easy and quick demoldingof set investment. Checkered inside, enlarged surface for effective evaporation during pre-heat process.
Mould system - Mould system - for 2 press mould 2 press mouldfor 2 press mouldforConsisting of sprueing baseand silicone ring.Available in 2 different sizes:3 and 9.