the flowchart of choosing an frustration (the old way) esd .../media/electronics/... · the...
TRANSCRIPT
START
END
Wait
Determine system settings (req. ESD rating, maximum
DC operating voltage, etc.
Specify device settings
(application, lines protected, max.
capacitance, max. leakage current)
Make the
intern do it
Submit part specs to component engineer for
approval
Finalize PCB for mass production
Test prototype
Select part that is best match to
design
Buildprototype PCB
Sort through data sheets manually to
find ones that match predefined
criteria
Eliminate parts too large for available
PCB space
Collect dozens of parts data sheets
from multiple vendors
Partaccepted
?
No
Yes
No
Yes
Passestests
?
www.littelfuse.com/iDesign
If you’re ready to stop wasting time when choosing an ESD protection device for your
projects, register for FREE access to the iDesign online tool today!
Select and Compare Your Devices3
Analyze Your Selections4
Tired of shuffling through catalogs and datasheets to find the right ESD protection devices, followed by weeks or months of testing, approvals, and prototype building, only to discover you have to start the whole process all over again?
The iDesign™ online design and selection platform from Littelfuse can help. This robust, web-based tool lets you identify the Littelfuse TVS Diode Array best suited to your application in four easy steps – just enter your system and device parameters, then compare up to three devices. A built-in simulation tool lets you do a “dry run” on a device’s ESD performance without the need to build a test board first. You can even find parts documentation and order samples for prototyping, all in the same convenient tool.
The Confident Solution
The Flowchart of Frustration (The Old Way)
Register Now
Enter System Settings1
Enter Device Settings2
Choosing an
ESD ProtectionDevice