the company - paintline ltdpaintlineltd.com/pdf/product/hb.pdf · the company has invested more...

THE COMPANY HB BODY S.A. was established in 1982 with the aim to produce and distribute high quality products for the automotive refinishing industry. We are based inThessaloniki Greece in self owned establishments. Ninety percent of our products are exported to sixty seven countries all over the world, whilst still holding the lead position within the Greek market place. HB BODY S.A. has three subsidiaries in the United Kingdom, Bulgaria, Spain and marketing - promotion centers inSerbia - Russia. Within Greece we also have a distribution centre in Athenscovering southern Greece and the islands.

PERSONNEL We currently employ 250 people within Greece a number which is increasingevery year. For every 5 employees there is one with a university degree. Amongst these are Chemists, Mechanical Engineers, Economists and Computer experts.

ESTABLISHMENTS – INVESTMENTS We are situated in Thessaloniki and Athens Greece on 120.000m2 of land. We have warehousing and production covering 80.000m2. Product research, design and development, administrative offices, training center and the auditorium cover further 10.000m2. The auditorium seats 120 people with the ability for 3 language translations simultaneously. The company has invested more than € 21 million over the last three year period. Further to this there is another € 3 million investment which includes a brand new plant of 1.700m2 for the production of metal printing for the cans. The company is really very proud of its technologically advanced logistic warehouse of empty tins where 7.000 pallets can be stored through a computerized system, the only one existing in Greece and among few in Europe.

ISO 9001In 1998 HB BODY S.A. obtained the ISO 9001 certificate by TUV (German Association for the Certificate of Quality Systems). This is an official guarantee for quality assurance in design development, production, installation and servicing. Here at HB BODY S.A. we are ready for every challenge. The ultimate challenge is for us is to conquer your heart and gain your belief in our products.

HB BODY S.A. THESSALONIKI GREECE

1. ROAD STONE CHIPPING PROTECTION 05 / 07

2. SEAM SEALERS 07 / 08

3. FILLERS (PUTTIES) 09 / 13

4. 1K - 2K PRIMERS 14 / 20

5. CLEAR COATS 21 / 24

6. SINGLE STAGE - BASE COAT PAINTS 24 / 25

7. HARDENERS - THINNERS (REDUCERS) 26 / 29

8. VARIOUS 29 / 31

Part Number Colour Size



auto refinishing products


550.00.1000.1

V.O.C. COMPLIANT

V.O.C. COMPLIANT

V.O.C. COMPLIANT

V.O.C. COMPLIANT

A waterborne based resin stonechip coating with sounddeadening properties. Excellent adhesion and flexibility.Suitable for the external and internal parts of the carbody.Ready for use, it is applied with a special spray gun (BODY UBS) at a pressure of 5 - 6 bar. (A shortened nozzle results in a fine finish whereas a long one in a course finish) After drying it can be easily overpainted with all paint systems. Fast drying(2-6 hours). The spray gun can be easily cleaned with water.

Rubber material with sound deadening / sealing properties and optimum covering ability. Suitable for the external underneath and internal parts of the car body with excellent adhesion properties. Ready for use, it is applied with a special spray gun (BODY UBS) at a pressure of 5-6 bar. (A shortened nozzle results in a fine finish whereas a long one in a course finish). Fast drying textured coating, remains elastic. Can easily be overpainted with single coat/base coat after drying. Adhesion promoter PLASTOFIX (#340) it is recommended to be used before any topcoat application.

Rubber material with sound deadening / sealing properties and optimum covering ability. Suitable for the external underneath and internal parts of the car body with excellent adhesion properties. Ready for use, it is applied with a special spray gun (BODY UBS) at a pressure of 5-6 bar.(A shortened nozzle results in a fine finish whereas a long one in a course finish). Fast drying textured coating, remains elastic. Can easily be overpainted with a single coat/base coat after drying. Adhesion promoter PLASTOFIX (#340) it is recommended to be used before any topcoat application.

A rubber based Sound deadening / sealing compound. Suitablefor application to the internal or external parts of theunderbody, with high ageing stability. Ready for use, it isapplied with a special spray gun (BODY UBS) at a pressure of5-6 bar (A shortened nozzle results in a fine finish where as along one in a course finish). Permanently elastic, fast drying,very good adhesion and it can be overpainted “wet on wet” with synthetic paints or with single coat/base coat.





6

6

6


930.02.0001.0 Black 1 L 6

513.00.0000.1

Transparent

932.02.0000.4

V.O.C. COMPLIANT

V.O.C. COMPLIANT

V.O.C. COMPLIANT

5L and 20L packaging is produced under special order

V.O.C. COMPLIANT

Underbody coating made of Wax, Rubber, Synthetic Resinand Bitumen, specially formulated against salinity (moisture).It is applied only on the underbody parts. It produces aperfect pinhole free finish, dries fast and remains elastic in temperatures of -20οC (- 4οF) and + 60οC (140οF). It has very good adhesion both on clean surfaces as well as on top of old coats. It is ready for use and it is applied by a special gun (BODY UBS) at a pressure of 5-6 bar (if a finer structure, is required then add nitro thinner (reducer) at 5-10%). Since it contains bitumen and wax, it is NOT overcoatable.

A special anticorrosive cavity Wax oil treatment with sound deadening properties. Can be applied to all closed parts (doors, bonnet, and running boards (chassis) and the external underbody of the vehicle. Penetrates easily and is resistant to high temperatures. Suitable for application after the paint procedure. It dries fast and it is applied by a special spray gun at a pressure of 5-6 bar.

Special coating made of Rubber, artificial Resin, Bitumenand Wax. Perfect protection from moisture and rust withpermanent elasticity in temperatures from -20οC (- 4οF) and+ 60οC (140οF). Very good adhesion to clean surfaces as wellas on top of earlier bituminous coatings. Can be diluted with thinner (reducer) at 20-30%. Applied with brush or spraygun at a pressure of 5-6 bar. Since it contains wax it is not overcoatable.

A bituminous / rubber thixotropic coating that provides excellent anticorrosive and stone chip protection. Perfect adhesion with permanent elasticity. Applied on theunderneath parts of the car body only. Can be diluted with thinner (reducer) at 10-20%. Applied by brush or spray gun at a 5-6 bar air pressure. Cannot beoverpainted.


6

12



6

3

1




6

12

999.03.0001.0 Light Beige

Light Beige

Light Beige

120gr20 Rubber based seamsealer, ideal for bonding metallic surfaces

and for joint filling of the car body. It is also suitable for the inner automobile parts that are not directly exposed to UV rays. Applied easily with a manual or pneumatic gun or brush. Dries fast, depending on the thickness, remains elastic and dimensionally stable. After it dries it can be overcoated by any type of paint.

V.O.C. COMPLIANT

A bitumen based thixotropic material with excellent rust and stonechip protection. Suitable for application onto running boards (Chassis), wheel arches and the vehicle underbody. Perfect adhesion, dries quickly and can be painted over with all paint systems. Applied with a brush or spray gun at a 5-6 bar air pressure. Can be diluted with 10-20% nitro thinner (reducer).

Black adhesive, ideal for the bonding of rubber to metal, also suitable for bonding of window and door fittings, tight sealing of headlamps and windscreens. It is also suitable for making car mats adhere to the automobile floor.

A refined rubber based sealer specifically developed to bond metal surfaces and joint fillings. Suitable for sealing the internal parts of the car body that are not directly exposed to UV rays. Easily applied with manual or pneumatic gun or brush. Depending on the thickness, dries quickly, remains elastic without losing its shape. Can be overcoated with all paint systems.



6

12


20

12

12


Transparent

Transparent 100mltube

Waterborne seamsealer for high quality bonding and sealing in the internal and external parts of the car body. Alsosuitable for wood and for marine uses. Dries quickly and remains permanently elastic. It is also suitable for exterior surfaces (Quarter panels, wing edges, door skins etc) that are directly exposed to UV rays. Retains its shape, and is overcoatable with all paint systems.

An excellent material suitable for bonding, filling andsealing of concrete, metal, ceramics, glass and plastic.Excellent adhesive ability, permanently elastic and resistant to weather extremes. Care should always be taken to ensure that all surfaces are de-greased and dust free beforeapplication.

Windscreen sealant featuring exceptional resistance against weather extremes. Also provides efficient sealing between welds in a panel assembly and for sticking metal to cement surfaces. It never dries and cannot be painted over. It iseasily applied by a manual or pneumatic gun.

ATTENTION: FOR COSMETIC SEALING ONLY, NOT TO BE USED AS A BONDING SEALER


24

24

12

6

3

3



12

6

3

3


12

6


12

6

216.03.0005.0 250g 24

Body 290 is a two component ultra light polyester filling product providing excellent adhesion andelasticity over all metallic, wood and polyester surfaces. A fine particle filler that spreads smoothly giving a pinhole free finish. It dries quicklyproviding excellent sanding properties for a perfect finish. Extremely easy to sand with P180-P400.

BODY 290 - ULTRA LIGHT MULTIFILLER

BODY 5112K POLYESTER FILLER (PUTTY)

BODY 205 L.P. PLUS-SOFT 2K POLYESTER FILLER (PUTTY)

BODYSOFT 2112K POLYESTER FILLER (PUTTY)

HB BODY PRO F216 SOFTPLUS2K POLYESTER FILLER (PUTTY)


290.07.0000.1

290.07.0000.3

Light grey

Light grey

1L

3L

6

3

A two component polyester fillingcompound, suitable for metallic, wooden and polyester surfaces. A fine particlefiller, but with good filling properties. Dries quickly and sands easily withP80-P120 grit paper for a perfect pinhole free finish.

A two component polyester fillingcompound, suitable for metallic, wooden and polyester surfaces. A fine particlefiller, but with good filling properties. Dries quickly and sands easily withP80-P120 grit paper for a perfect pinhole free finish.

A two component polyester filling compound, suitable for all metallic surfaces, wooden and polyester surfaces. A fine particle filler, but with good filling properties and has a smooth finish. Dries quickly and sands easily with P120-P240 grit paper for a perfect pinhole free finish.

A two component polyester filler for metal, wood and polyester surfaces. A fine particle filler with good filling properties. Easy to sand even days after application. Fast drying and can be sanded with P80-P150 grit paper for a perfect pinhole free finish.



6

6

3

6




12

6

3

6

230.01.0000.1 White 1L 6

209.01.0000.0

209.01.0000.1

209.01.0000.2

209.01.0000.3

White

White

White

White

500 ml

1L

1,65L

12

6

3

6

Universal two component polyester filler, suitable for application on all metals(aluminium, stainless steel, galvanised steel, bare steel). Also suitable for wood andpolyester surfaces. Dries quickly (20-30 min) and can be sanded easily with P80-P120 grit paper for a perfect pinhole free finish.

A two component light polyester filler for metal, wood and polyester surfaces. A fine particle filler with excellent filling properties. Fast drying and can be sanded with P80-P180 grit paper for a perfect pinhole free finish without clogging the sanding paper.

Universal two component polyester filler, suitable for application on all metals (aluminium, stainless steel, galvanised steel, bare steel). Also suitable for wood and polyester surfaces. Dries quickly (20-30 min) and can be sanded easily with P80-P120 grit paper for a perfect pinhole free finish.

Two component light polyester filler. The only filler you will ever need in the Body & Paint shop. Suitable for repairing jobs on all metal surfaces including aluminium,galvanized steel, stainless steel, chrome and bare steel. Also suitable on wood andpolyester surfaces. It is sanded easily with P100-P180 grit paper and it gives a perfect pinhole free finish.

BODY UNISOFT 210 2K UNIVERSAL POLYESTER FILLER (PUTTY)

BODY LITE 230 2K LIGHT POLYESTER FILLER (PUTTY)

HB BODY PRO F213 UNIPLUS2K ZINC POLYESTER FILLER (PUTTY)

BODY UNILITE 209 2K UNIVERSAL LIGHT POLYESTER FILLER (PUTTY)



24

6

3

6



24

12


Two component polyester filler (putty) with excellent adhesion to plastic bumpers excluding PE (Polyethylene). Simply degrease usingANTISIL 770 (NORMAL) or ANTISIL 771 (FAST) and a non woven pad prior to application.Extremely easy to sand with P120-P240 grit paper for a perfect pinhole free finish without clogging the sand paper. Excellent mechanical resistance due to its high elasticity.

Two component fine polyester filler/stopper, suitable for application over all metal surfaces (galvanized steel, aluminium, stainless steel, bare steel, chrome). Also suitable for plastic bumpers (excluding PE), polyester substrates and existing painted surfaces. Easily applied and extremely easy to sand with P150–P400 grit paper. Produces a perfect pinhole free surface without clogging the sanding paper.

Extra fine stopper/filler for minor imperfections on metallic surfaces. Ensures a smooth surface and a perfect feather edge. Easy to sand with P150-P400 grit paper to obtain a perfect pinhole free finish. Also suitable for plastic bumper repairs.

Two component polyester filler (putty) with aluminium added to provideincreased thickness and resistance to vibration. Suitable for both metal and wood surfaces. Dries quickly 20-30 min@ 23οC (73οF). Easy to sand with P80-P120 grit paper to obtain a perfect pinhole free finish.

BODY UNI-FINE 225 2K UNIVERSAL POLYESTER FILLER – STOPPER (PUTTY)

BUMPERSOFT 222 2K BUMPER POLYESTER FILLER (PUTTY)

BODYALU 255 2K ALUMINIUM POLYESTER FILLER (PUTTY)

BODYFINE 220 2K FINEPOLYESTER STOPPER



6

1


24

12

6


6

Two component light polyester filler reinforced with fibre glass for bridging and filling of cavities. Also suitable for filling over corroded surfaces. Easy to apply, dries quickly and is extremely easy to sand with P80-P120 grit paper. Resulting in a high resistant and elastic surface.

HB BODY PRO FIBERLIGHT F217 2K POLYESTER FIBERGLASS

BODYFILLER 260POLYESTER SPRAY FILLER

BODYFIBER 250 FIBERGLASS 2K POLYESTER FILLER


217.05.0000.0

217.05.0000.1

217.05.0000.2

LightgreenLightgreenLightgreen

500 ml

1L

2L

12

6

3

250.06.0004.0 Green 380g 24Fiberglass 2K polyester filler for bridging and filling of cavities. Also suitable for filling over corroded surfaces. Easy to apply, dries quickly and is easy to sand with P80-P120 grit paper. Resulting in a high resistant and elastic surface.

Two component polyester spray filler. Applied with a 2,50-3,00 mm spray gun nozzle. Due to its high thixotropic consistency the hardener should be stirred in thoroughly. Easy to sand (dry), for a smooth pinhole free finish. Allow 2-3h to dry @ 23oC (73oF). Can be diluted with polyester thinner (reducer) BODY POLY (#780.00.0000.1).

Two component polyester spray filler. Applied with a 2,50–3,00 mm spray gun nozzle. Easy to sand (dry), for a smooth pinhole free finish. No thinner (reducer) is required. Allow 2-3h to dry @ 23οC (73οF).





980.06.0000.0

218.06.0000.1 1Kg 6

Green

Light green P218 is a glaze putty which is self levelling

and due to its fine formula spreads smoothly with excellent adhesion over all metals. It fills pinholes and uneven surfaces and can be blend in with all HB BODY putties in order to improve their workability and sandability. P218 is easy for sanding with P180 and it is pinhole free.

BODY GLAZE P2182K POLYESTER FINISHING PUTTY

One component fine filler, ideal for finishing of small uneven surfaces. Apply 2-3 light coats allowing 30 minutes for thorough drying and subsequently sand with fine sandpaperP600-P1000. It can be overcoated with all type of primers or paints.

One component nitrocellulose filler, ideal for finishing of small uneven surfaces. Suitable for application over polyester fillers, nitrocellulose - high build primers and can be painted over with all paint systems. Apply 3-4 light layers allowing 15 minutes between coats and can be sanded with dry or wet papers for a pinhole free finish.

BODY NITROSOFT 2411K FINE NITRO FILLER

241.06.0000.2 Green 2Kg 6


6

6

6

6

6


3

3

6

3

6

3



Consists of five tinters (yellow, red, black, green and blue). To form a primer mix system used in combination with BODYFILL 360 (2:1) or BODYFILL 307 (4:1) in white or transparent. Using computer generated formula forty-eight different shades can be achieved and even more. It is cured with an isocyanate based BODY 720 NORMAL (#720) / BODY 725(#725). No thinner (reducer) is required if used as a standard two component primer, 50% BODY 740 ACRYL THINNER (REDUCER)NORMAL (#740) can be added for “wet on wet” application .

WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THIS REASON THE MATERIAL MUST BE APPLIED IMMEDIATELY.

Ideal adhesion to unsanded (E-COAT) panels. Two component high build acrylic primer. Suitable for any paint system. It is cured with an isocyanate based BODY 720 NORMAL (#720) / BODY 725(#725) @ 4:1. No thinner (reducer) is required. It accepts all paints systems. For “wet on wet” applications you must use BODY 720 HARDENER NORMAL and 50% BODY 740 ACRYL THINNER (REDUCER) NORMAL.


WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THISREASON THE MATERIAL MUST BE APPLIED IMMEDIATELY.

Ideal adhesion to unsanded OEM panels and to plastic parts except P.E.. High quality acrylic primer for partial and full passenger car refinishes. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding or “wet-on-wet application”. The goodabsorption of overspray and excellent levelling guarantee outstanding results. It is cured with anisocyanate based BODY 720 NORMAL (#720) / BODY 725(#725) @ 2:1. For “wet on wet” applications you must use BODY 720 HARDENER NORMAL and 50% BODY 740 ACRYL THINNER (REDUCER)NORMAL.

Transparent

Transparent

360.02.0000.1

360.02.0000.4

Black

Black

1L

4L 3



333.01.0000.1 White 1L 6

333.01.0000.3 White 33L

333.02.0000.1 Black 1L 6

333.02.0000.3 Black 33L



HB BODY PRO P333 is a high quality acrylic – filling sealing primer for partial and fullautomotive refinishes. Suitable for original or old paint work and ideal for unsanded O.E.M. (E-COAT) panels. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding. Due to its high filling power and vertical stability, higher film thickness ispossible. The fast drying and excellentlevelling of this primer guarantee efficient application and fast sanding. It is cured with an isocyanate based BODY HARDENER 725 FOR PRIMERS (# 725) BODY / BODY 720 HARDENER NORMAL (#720). One of its greatest advantages is that it is ready for sanding after 2h air dry @ 23oC (73oF).


HB BODY PRO P334 is a high quality acrylic – filling sealing primer for partial and full automotive refinishes. Suitable for original or old paint work and ideal for unsanded O.E.M. (E-COAT) panels. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding or “wet on wet” application. Due to its high filling power and vertical stability, higher film thickness is possible. The fast drying and excellent levelling of this primer guarantee efficient application and fast sanding. It is cured with an isocyanate based BODY HARDENER 725 FOR PRIMERS (# 725). One of its greatest advantages is that it is ready for sanding after 2h air dry @ 23oC (73oF). For “wet on wet” applications you must use BODY 720 HARDENER NORMAL and 50% BODY 740 ACRYL THINNER (REDUCER)NORMAL.


HB BODY PRO P335 is a high quality acrylic – filling sealing prime for partial and full automotive refinishes. Suitable for original or old paint work and ideal forunsanded O.E.M. (E-COAT) panels. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding. Due to its high filling power and vertical stability, higher film thickness is possible. The fast drying and excellent levelling of this primer guarantee efficient application and fast sanding. It is cured with an isocyanate based BODY HARDENER 725 FOR PRIMERS (# 725) BODY / BODY 720 HARDENER NORMAL (#720). One of its greatest advantages is that it is ready for sanding after 2h air dry @ 23oC (73oF).






Two component high build primer suitable for all paint systems (synthetics - single coat or base coat). Can be applied over filled and well prepared old paint surfaces. Suitable for application over ABC and hard PVC plastic surfaces. It is cured with an isocyanate based BODY HARDENER (# 722 FAST - # 720 NORMAL - #721 SLOW) or BODY 725(#725) @ 3:1 ratio. It is diluted 10-15% with thinner (reducer) BODY ACRYL (#740 NORMAL - #741 SLOW). Applied by a spray gun of 1,5-1,8 mm nozzle diameter. Allow 20-30 min to dry@ 60οC (140οF ) panel temperature or 3 hoursair dry @ 23οC (73οF).

WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THIS REASON THE MATERIAL MUST ΒE APPLIED IMMEDIATELY

Excellent high build 2K primer with outstanding filling power for all types of paints(synthetics - single coat or base coat). It is cured with an isocyanate based BODY HARDENER (# 722 FAST - # 720 NORMAL - #721 SLOW) or BODY 725(#725) @ 4:1 ratio . It can be diluted 10-15 % with thinner (reducer) BODY ACRYL (#740 NORMAL - #741 SLOW). Quick drying and easy to sand.


Two component high build primer with outstanding filling properties, suitable for all paint systems. It is cured with an isocyanate based BODY 720 NORMAL (#720) / BODY 725(#725) @ 5:1 ratio.It can be used either as a sealing primer or as a high build filling primer. It can be diluted with 20-30% thinner BODY ACRYL (#740 NORMAL - #741 SLOW) and applied by spraygun of 1,5–1,8 mm nozzle diameter.




6

6



6

6

6

6

6

Two component high build primer suitable for all paint systems (synthetics - single coat or base coat). Can be applied over filled and well prepared old paint surfaces. Suitable for application over ABC and hard PVC plastic surfaces. It is cured with an isocyanate based BODY HARDENER (# 722 FAST - # 720 NORMAL - #721 SLOW) or BODY 725(#725) @ 3:1 ratio. It is diluted 10-15% with thinner (reducer) BODY ACRYL (#740 NORMAL - #741 SLOW). Applied by a spray gun of 1,5-1,8 mm nozzle diameter. Allow 20-30 min to dry @ 60οC (140οF ) panel temperature or 3 hours air dry @ 23οC (73οF).

WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THIS REASON THE MATERIAL MUST BE APPLIED IMMEDIATELY

Specially formulated 2K, adhesion promoting,anticorrosion primer. Suitable for all metal types (aluminium, galvanized steel, stainless steel, common metal). It dries fast and it can be re-coated within 30-60 min - no sanding is necessary. Can be painted over by all types of paint. It can be sanded with a P1000 grit sandpaper.

Excellent transparent acrylic 2K primer, suitable for the followingapplications: As a transparent adhesion promoter over non sanded areas. As a filler over treated surfaces. As a first layer (ground coat) for paints with inferior covering abilities(transparent or pigmented). No sanding required within12 hours of application, if left over 12 hours thefillsealer must be sanded prior to any paint application.It is cured with an isocyanate based BODY HARDENER(# 722 FAST - # 720 NORMAL - #721 SLOW) @ 2:1.

Beige

Transparent




6

6

6


6961.07.0000.1

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Grey

Grey

Grey

961.07.0000.4

510.07.0004.0

3

6

989.07.0000.8

One component acid cured, adhesion promoter and anticorrosive primer. Suitable for application over all metal surfaces (galvanized, aluminium, stainless steel, bare metal, chrome). Dilute with thinner(reducer) BODY ACRYL (#740 NORMAL - #741 SLOW) @ 2:1 ratio. Fast drying 45 min @ 23οC(73οF ) / 20 min @ 60οC (140οF). Suitable for“wet-on-wet: application over brand new panels where filler has not been applied. When using over old paint BODYFILL 961 can be used as a filling primer which must be sanded before painting. Adheres nicely to non sanded surfaces and can be painted over with all paint systems.

Excellent 2K yellow primer suitable primarily to be applied over aluminium, galvanised, stainless steel and zinc coated surfaces. Mix with an oxide based hardener BODY 960 ACT (#731). Applied in one layer of 10μm (0,4mil) . Dries within 10min approx, does not require sanding and is overcoatable by any primer paint system, (except those that are polyester based, polyester materials can not be hardened).

2K high performance Epoxy Primer withanticorrosive properties. Excellent sealing,adhesion and filling abilities. Resistant toextreme weather conditions. Suitable forapplication over old paints, non sanded bare metal, aluminium, stainless steel and zincsurfaces. It cures with BODY 989 EPOXYHARDENER (# 732) @ 4:1. It can be diluted with BODY EPOXY THINNER (REDUCER) (#775) @ 20-30% and applied by a spray gunof 1,5-1,8mm nozzle diameter.

BODY 989 4:1 EPOXY PRIMER -SURFACER - HARDENER




968.07.0000.1 Grey 61Kg

968.07.0000.5 Grey 35Kg

968.03.0000.1 Beige 61Kg


980.07.0000.1 Grey 1L 6

980.07.0000.4

980.02.0000.1

Grey

Black

3

6

4L

1L

980.03.0000.1 Beige 1L 6

980.03.0000.4 Beige 34L


6

3

6

Fast drying 1K filling primer suitable for all kinds of paints (synthetic - single coat or base coat). Must be applied in thin layers (1,3 – 1,8mm) over sanded areas only.Can be sanded within 30min. Must be diluted 50-100% with BODY ACRYL THINNER (REDUCER) (#740 NORMAL - #741 SLOW).

Fast drying nitrocellulose primer suitable for application under nitro, synthetic or single coat acrylic paints. Applied in thin layers over sanded surfaces. Dries very fast 30 min and can be sanded easily with water and P600-P1000 grit paper.

Fast drying anticorrosive primer which can be applied over metal and wooden surfaces. Great resistance to moisture, salinity, mechanical, chemical and other severeenvironmental conditions. Applied with a brush, roller or spray gun (1,8 mm nozzle diameter) and can be diluted10-30% with nitro thinner (reducer) BODY ECO THINN (#767). ZINC CHROMATE FREE.


6

3

6

3

6

20L packaging is produced under special order

6

6

6




6

6

340.00.0000.0 500ml 6


6

6

BODY P 962 1K ISOLATOR

BODY P 962 ISOLATOR is a 1K ready for use quick drying primer. Prevents from lifting and bleeding of old paint which is sensitive to strong solvents. It can be overcoated with primer / surfacer or polyester spray filler after 1 hour. Does not require any sanding. There is also a special gun wash cleaner 769 in order to avoid any product remains in the spay gun.


962.06.0000.1

520.00.0000.3

769.00.0000.1

1L

400ml aerosol

1L

khaki

khaki

6

6

6

High quality, 1K fast drying anticorrosive primer suitable for application over metallic and wooden surfaces.Excellent resistance to salinity, moisture and to severe weather conditions. Can be applied with a brush, roller or spray gun (1,8 mm nozzle diameter). It can be diluted 10-30% with nitro thinner (reducer) BODY ECO THINN (#767). ZINC AND LEAD CHROMATE FREE.

High quality, 1K fast drying anticorrosive primer suitable for application over metallic and wooden surfaces.Excellent resistance to salinity, moisture and to severe weather conditions. Can be applied with a brush, roller or spray gun (1,8 mm nozzle diameter). It can be diluted 10-30% with nitro thinner (reducer) BODY ECO THINN (#767). ZINC AND LEAD CHROMATE FREE.

Special adhesion promoter primer suitable forapplication on all plastic parts of the car bodyexcluding Polyethylene (PE). Ready for use, it is applied by a spray gun of 1,5 mm nozzle diameter. Suitable for plastic bumpers, spoilers and other structured surfaces that have been coated with BODY 950 (#950) or BODY 550 (#550) or AUTOFLEX or AUTOFLEX SPECIAL (#951). It dries within 10min and can be painted over with all paint systems.

Zinc chromate-lead FREE anticorrosive primer with a high zinc content. Suitable for Spot and Mig Welding with excellent metal protection. Can be applied with a brush, roller or spray gun (1,4–1,8 mm nozzle diameter). Applied at a maximum thickness of 10-20μm (0,4-0,8 mils) . It can be diluted 25-30% with nitro thinner (reducer) BODY ECO THINN (#767).

Transparent

Transparent

Transparent

Transparent



6

4

6

6

41,7L

728.00.0001.0 Slow

Slow728.0000.00.1

1,7L

6

6

6

6

4


6

4

6

6

4


6

4

6

6

41,7L

728.00.0001.0 Slow

Slow728.0000.00.1

492.00.0000.1

492.00.0000.5

1,7L

6

6

6

6

4

2K, high solids, acrylic clear coat. Mix with BODY HS STANDARD hardener (#730) @ 2:1. It can be diluted with thinner (reducer) BODY ACRYL SLOW (#741) or EXTRA SLOW (#742). Sprayboothtemperature is always required.

The very well know AUTOCLEAR 492 HS (3:1) is now available with SCRATCH RESISTANT properties. Mix with HARDENER HS 724STANDARD (#724) or HS 723 FAST (#723) or 727 POLAR or 728 SLOW @ 3:1. Due to its high build, excellent levelling, fasthardening and high gloss, this product is suitable for all top quality, full and partial (spot panel) refinishes. Using 727 POLAR or HS 723 FAST (#723) hardener will reduce the curing time to 15 - 20 min @ 60°C (140°F). Ready for assembly work, minor repairs and polishing 30 min after baking.

AUTOCLEAR 492 HS is a crystal clear, high gloss clear coat from our “2K - Acryl - system”. Mix with HARDENER HS 724 STANDARD (#724) or HS 723 FAST (#723) or 727 POLAR or 728 SLOW @ 3:1. Due to its high build, excellent levelling, fast hardening and high gloss, this product is suitable for all top quality, full and partial (spot panel) refinishes. A more economic product than traditional medium solid clears that results in both a financial gain and more environmentally friendly product. Using 727 Polar or HS 723 FAST (#723) hardener will reduce the curing time to 15-20 min @ 60οC (140οF). Ready for assembly work, minor repairs and polishing 30 min after baking.

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

AUTOCLEAR 492 SR (3:1) HSSCRATCH RESISTANT CLEAR COAT

AUTOCLEAR 491 HSCLEAR COAT

AUTOCLEAR 492 (3:1) HSCLEAR COAT




Extremely fast drying Scratch Resistant clear coat suitable for high volume shops. Ensures durable gloss and offers excellent resistance to extreme weather conditions. Mix with HARDENER 720 NORMAL (#720) @ 4:1. Dries rapidly, 3-4 hours air dry and 15min @ 60°C (140°F). Due to the rapid dry-ing it is recommended for spot and panel repairs up to half a car. For even faster air drying, mix with Hardener 727 POLAR and 20 ml TURBO AX 715 for every 250 ml of ready for use product.

- 5 min dust free @ 23°C- 40 min ready for assembly @ 23°C- 60 min ready for polishing @ 23°C- Scratch resistant- Crystal clear

AUTOCLEAR 495 SREXPRESS (4:1) RAPID Part Number Colour Size

500ml 495SR & 125ml

727(set)495.91.0000.0

- 5 min dust free @ 23°C- 40 min ready for assembly @ 23°C- 60 min ready for polishing @ 23°C- Scratch resistant- Crystal clear

Extremely fast drying clear coat suitable for high volume shops. Ensures durable gloss and offers excellent resistance to extreme weather conditions. Mix with HARDENER720 NORMAL (#720) @ 4:1. Dries rapidly, 3-4 hours air dry and 15min @ 60oC (140oF). Due to the rapid drying it is recommended for spot and panel repairs up to half a car. For even faster air drying, mix with Hardener 727 POLAR and 20 ml TURBO AX 715 for every 250 ml of ready

HB BODY PRO C494 ULTRA HS is a crystal clear, high gloss fully compliant clear coat from our “2K - Acryl - system”. Due to its high build, excellent levelling, fast hardening and high gloss this product is suitable for all top quality, full and partial (spot panel) refinishes. Due to its high solid content HB BODY PRO C494 CLEAR COAT ULTRA HS is a more environmental friendly product. Due to its superior coverage it is a far more economical product than conventional clears. Using H735 FAST HARDENER, the curing time is reduced to 20 min @ 60οC (140οF).

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

for use product.


493.02.0000.1 MAT 1L

Body 493 is a high quality clear coat designed to give a perfect mat finish for full and partial refinishes. It gives an excellent smooth surface and it is easy to handle. 493 has very good properties in weather and chemicals resistance and it is fast drying. Mix at a ratio of 2:1 with Hardener 720 NORMAL for the first coat and add 10% 742 ACRYL EXTRA SLOW for the second coat.

AUTOCLEAR 493 2:1 MAT

Transparent


6

4

6


6

4



497.01.0000.1

497.01.0000.5

496 HS Clear Coat is a crystal clear, high gloss coat from our 2K - Acryl - system. Due to its high build, excellent levelling and high gloss this product is suitable for all top quality, full and partial (spot panel) refinishes. Mix at a ratio of 2:1 with HARDENER 720 NORMAL (#720), 722 FAST (#722) or 727 POLAR (#727). Using BODY HARDENER 727 or 722 POLAR the curing time can be reduced to 10-20 min @ 60oC (140oF). Assembly work and polishing can be carried out only 30 minutes after baking.

497 HS SCRATCH RESISTANT Clear Coat is a crystal clear, high gloss coat from our 2K - Acryl - system. Due to its high build, excellent levelling and high gloss this product is suitable for all top quality, full and partial (spot panel) refinishes. Mix at a ratio of 2:1 with HARDENER 720 NORMAL (#720), 722 FAST (#722) or 727 POLAR (#727). Using BODY HARDENER 722 or 727 POLAR the curing can be reduced to 10 - 20 min @ 60°C (140oF).Assembly work and polishing can be carried out only 30 minutes after baking.

Transparent

Transparent

Transparent

Transparent

Transparent

The very well know AUTOCLEAR 496 HS with SCRATCH RESISTANT properties. Mix at a ratio of 2:1 with HARDENER 720 NORMAL (#720), 722 FAST (#722) or 727 POLAR (#727). Using BODY HARDENER 727 POLAR and 20ml TURBO AX 715 for every 250ml ready for use product the curing time can be reduced to 10 - 15 min @ 60°C (140°F). Assembly work and polishing can be carried out only 30 minutes after baking.


Transparent

Transparent

499 HS Clear Coat is a crystal clear, high gloss coat from our 2K - Acryl - system. Due to its high build, excellent levelling and high gloss this product is suitable for all top quality, full and partial (spot panel) refinishes. Mix at a ratio of 2:1 with HARDENER 720 NORMAL (#720), 722 FAST (#722) or 727 POLAR (#727) and up to 20% thinner NORMAL (#740) or SLOW (#741). Curing time is 10-30 minutes at 60°C depending the hardener.


6

4

499.00.0000.0 500ml 6Transparent

Transparent

Transparent





6

6

3



250ml


Synthetic air drying alkyd resin paint with reliable drying time, high level and permanent gloss. Excellent coverage and excellent resistance to severe weather conditions. It is especially suitable for high quality automotive repairs. Available in various standard shades and can be manufactured to any shade if required. It can be diluted 20-25% with BODY SYNT (#750) or with BODY 20:80 (#710) as an isocyanate based cure accelerator. It can be applied over old paint and on primer treated surfaces that have previously been sanded (sanding paper P400-P600).

A two component quick drying acrylic resin based paint that has high durable glossas well as chemical, severe weather and mechanical durability. The widevariety of shades covers almost all car manufacturers. It is cured with anisocyanate based hardener BODY HARDENER NORMAL(# 720) or 722 @ 2:1.Available in various standard shades. Can be manufactured to any shade it is required.

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

498 SR HS Clear Coat is a crystal clear, high gloss coat from our 2K – Acryl – system. Due to its high build, excellent levelling and high gloss this product is suitable for all top quality, full and partial (spot panel) refinishes. Mix at a ratio of 4:1 with HARDENER 720 NORMAL (#720) or 722 FAST (#722) or 727 POLAR (#727). Curing time is 10-15 min @ 60oC (140oF). No thinner (reducer) is required.

AUTOCLEAR 498 SR (4:1) HS SCRATCH RESISTANT CLEAR COAT Part Number Colour Size

6

4

498.01.0000.1

498.01.0000.5

Transparent

Transparent



6

6

3


6

3

6

6

6

6

6

6

6

6

A one component high quality acrylic resin based waterborne basecoat mix-system. Reduce 10-15% with AQUA-BODY773 SPRAYING SOLVENT. Clean surface and spraying equipment with AQUA-BODY 772 DEGREASER. Comprises basic tintersmetallic, solid colours, pearls and Xirallic pearls. Suppled with a especially designed heated cabinet, manually sprayed colourchip cupboard and software for shade recipes covering all car manufactures.

Part Number Colour SizeAQUA-BODY WATERBORNE

BASECOAT MIX-SYSTEM

480.--.----.- - 500ml 2

480.--.----.- - 1L 2

Fast drying metallic base coat, mixed @ 2:1 with acrylic thinner (reducer) BODY ACRYL NORMAL (#740). Apply in three coats for a smooth surface. It can be applied either on earlier layers of paint or on primer treated surfaces that have subsequently been sanded (sanding paper P600-P1200). After 10–15 min drying HB BODY Clear coats can be applied. Available in various standard shades.

Fast drying 1K paint for restoring OEM look of plastic bumpers. Easy to apply with excellent mechanical resistance due to its high elasticity. It is also available in a texture form.



Fast isocyanate hardener for 2K PRIMERS ONLY. Available also in SLOW version for hot temperatures.


6

6

6

6

6725.10.0000.1

Fast

Fast

Fast

Fast

Slow


495.91.0000.0500ml

495SR & 125ml

727(set)

250ml

500ml

1L

1,25L

1,7L

2,5L 4

4

4

6

6

6

6

727.00.0002.0

727.00.0000.0

727.00.0000.1

727.00.0001.1

727.00.0000.2

727.00.0000.3

Isocyanate hardeners for 2K Primers, 2K Acrylic paints and 2K Clear coats. Available in NORMAL (#720), SLOW (#721), FAST (#722).

VERY FAST Isocyanate hardener for 2K Primers as well as for Acrylic clear coats (492, 495, 496, 497, 499).

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

Transparent

BODY 720-721-722HARDENER

27



6

4

1



715.00.0000.0An outstanding accelerator compatible with 2K PUsystems, including LOW VOC clear coats. It improves drying time by producing excellent results. Use 4 caps in 1 Liter of the ready for use product.

Special thinner (reducer) suitable for the dilution of polyester spray fillers (#260). It can also be used for the cleaning of equipment used in the application of polyester materials.

Thinner (reducer) suitable for nitrocellulosepaints - lacquers (clears) as well as for nitrocellulose surfacers and 1K filling primers. Recommended forcleaning of spray guns and paint tools. DOES NOTcontain Recycled Solvents.

Transparent

Transparent

Transparent

BODY POLY 780 POLYESTER THINNER (REDUCER)

HB BODY PRO A715 TURBO AXACCELERATOR

Transparent

Transparent

28

Isocyanate hardener especially designed for giving AQUA-BODY basecoat paint excellent weathering and chemical resistance. It is mixed by 5% within the ready to spray AQUA-BODY basecoat paint. For use ONLY on inner metallic parts on which no clear coat is applied, e.g. under hood. Has to be stored in metallic cans.

AQUA-BODY 774HARDENER Part Number Colour Size

774.00.0000.0 500 ml 6

Special Blend-in Thinner for AQUA-BODY basecoat paint. Suitable for all AQUA-BODY MIX SYSTEM shades either metallic or non-metallic, whenever blending (fade-out) on spot repairs is necessarry.

AQUA-BODY 776BLEND-IN THINNER Part Number Colour Size

776.00.0000.1 1L 6


Special thinner (reducer) used for the dilution of polyurethane resin i.e. acrylic high build primers, 2K acrylic topcoats and solvent basecoat. Dilutes perfectly and provides a perfect surface without any elongation of the drying time. It can also be used for the cleaning of equipment used in the application of acrylic material. DOES NOT contain Recycled Solvents. Available in NORMAL, SLOW and EXTRA SLOW.


6500ml

1L

1L

1L

5L

5L

20L

20L

500ml

6

4

1

6

6

4

1

6

740.00.0000.0

740.00.0000.1

740.00.0000.5

740.00.0000.7

741.00.0000.0

741.00.0000.1

741.00.0000.5

741.00.0000.7

742.00.0000.1

Normal

Normal

Normal

Normal

Slow

Slow

Slow

Slow

Extra Slow

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

BODY 740-741-742 ACRYL 2K THINNER REDUCER

29



6

4

6

6520.00.0000.2 400ml Aerosol

4


6

6

6


6

6


8. VARIOUS

Special thinner (reducer) for blending of top coats(also known as fade out thinner).

A transparent coating suitable for the removal of paint, clear coats and latex materials from all metal surfaces. Also suitable for cleaning of paint tools (e.g. spray guns, spatulas, etc). Applied with a brush or spatula. It stays active for (30-60 min). Will not effect the metal surfaces underneath the paint that is to be removed.

Special degreaser for the removal of anycontamination from surfaces prior to painting.

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

Τransparent

30




Special waterborne degreaser for the removal of any contamination from surfaces prior to painting. Also to be used as cleaning solvent for any spraying equip-ment of waterbased paint. It is absolutely necessary to wash out the spraying gun with AQUA-BODY 772 DEGREASER just before pouring into the gun’s pot the AQUA-BODY paint. Contains high purity deminer-alised water and additives for proper cleaning.

AQUA-BODY 772DEGREASER Part Number Colour Size

772.01.0000.1 1L 6

Special thinner (reducer) for waterborne basecoat paint. Contains high purity demineralised water and special additives for proper surface wetting and levelling. Add 10-15% of AQUA-BODY 773 SPRAYING SOLVENT to adjust the AQUA-BODY basecoat paint viscosity to the desired level.

AQUA-BODY 773SPRAYING SOLVENT Part Number Colour Size

773.00.0000.1 1L 6

8. VARIOUS

Special agent developed for reducing the gloss of 1K or 2K paints. Add 20-50% depending on the type of finish required. After adding the matting agent, less thinner (reducer) is required.

A waterborne paste used for lightly sanding old paintwork prior topainting, providing adhesion for the new coat of paint. Silicone andammonia free. It can be used in place of the usual wet or dry sanding paper. It is applied with wet sponge or non woven pad.

Τransparent

Τransparent

Τransparent

Τransparent




A high quality coarse machine polishing compound suitable for the removal sanding scratches from P1500 and anything finer. Also Suitable for the removal of car wash scratches and for the removal of orange peel giving a deep and lasting shine. Silicone free and suitable for all paint finishes including new and aged cured.

A high quality medium – fine machine polishing compound. HB BODY 806 (Power polish) is the final polish required in the process and compliments the 805 (Super cut). 806 (Power polish) removes and cleans any imperfections and fine sanding lines without leaving any compound swirl. Silicone free and suitable for all paint finishes including new and aged cured. This leaves a permanent finish where the swirls will not re appear.

805 POLISHING COMPOUND COARSE (SUPER CUT)

806 POLISHING COMPOUND MEDIUM (POWER POLISH)


805.01.0000.1 White 1Kg 6


806.03.0000.1 White 1L 6

8. VARIOUS

31

Special additive for flexing of 2K products i.e. 2K Primers, 2K Paints or 2K Clear coats. Flexing all the above is absolutely necessary for painting elastic parts of the car (bumpers, spoilers etc). BODY 803 FLEX AGENT is added 5% by volume to the 2K Primers and 10-15% by volume to 2K Paints and Clear coats, after the hardener is added according to the instructions of the 2K product.

Additive suitable for the prevention and confrontation of silicon craters. 10ml of 804 FISH EYE KILLER (one cap approx.) is added to 500ml (one gravity spray gun vase) of mixed paint. The mix then must be applied in light coats over the craters until they disappear. After adding Anti silicone 804 to the paint mix ensure that it is mixed well.

Τransparent

Τransparent

H13

0205

1 -

GB

ver

sio

n D

’FE

B 2

013

auto refinishing productsHB BODY S.A.GR 570 22 SINDOS INDUSTRIAL AREATHESSALONIKI GREECETel.: +30 2310 790000, Fax: +30 2310 790010http://www.hbbody.com, e-mail: [email protected]

the company - paintline ltdpaintlineltd.com/pdf/product/hb.pdf · the company has invested more...

Documents