the bestselection of qualitytwist-on wire connectors under...

1

History since 1914 2

THE BEST SELECTION OF QUALITY TWIST-ONWIRE CONNECTORS UNDER ONE BRAND

Packaging Choices 3

833 Wide Range / Ergonomic Compact Design 4

Marrette XTP 6

Marrette Type II Winged 8

Marrette Black High Temperature — 150°C (302°F) 10

Porcelain Extreme-High Temperature — 645°C (1200°F) 12

Marrette ACS Aluminum Wiring 14

Marrette Vibration Proof with Set Screw 16

Marrette Green for grounding 18

Wire Combination Reference Guide 20

Alphanumerical Index 26

NE W

2

Company Background

At the turn of the twentieth century, a young Scotsman named Bill P. Marr immigrated to Ontario, Canada. After settling in the Toronto area, Marr was soon employed by the T. Eaton Company as a contractor for Ontario Hydro, where he worked as an electrician converting gas lit homes toelectrical incandescent lighting.

As part of this conversion, the accepted practice back then was a process called “solder and tape”. Typically, a mechanicwould first run the wires required, then an electrician wouldpolish the exposed conductors and twist them together. Next,the ends of the wires would be firmly joined by dipping them ina pot of molten solder, and after they cooled, the wires wouldthen be wrapped with an insulating tape.

Over time, this process proved to be both time consuming anddangerous, as Bill Marr discovered first-hand when heinadvertently spilled a scorching solder pot while working in acustomer’s home. Convinced that there had to be a safer andmore efficient way of joining two electrical conductors, Marrworked tirelessly in his basement shop until he finally inventedthe first pressure type wire connector (a set screw version whichwas the forerunner to the modern day wire connector).

Since that day in 1914, the Marr® company has become aleading manufacturer of twist-on wire connectors in NorthAmerica. The Marrette® brand has so revolutionized the waybranch circuits were connected that the term “marrette” hasbecome synonymous with “wire connector” in the electrician’svocabulary.

And since being acquired by T&B in 1997, this highly respectedMarrette® brand name has become an integral part of the vastThomas & Betts product offering to the construction market.

3

Small Formats

Bag Formats

Wire Connector Packaging Choices

Model Format Description


NOTE: Models C and B to be ordered by blistercard or small box.

KP Keg Pak Resealable bag of 500

C Card Blistercard of 3, 6, 15 or 20B Window Box Small box of 25 to 50P Propak Box of 50 or 100

Bulk Pack Formats


Q Flip-Pak Container of 200 or 250D Flip-Pak Container of 500M Flip-Pak Container of 1000BK Flip-Pak Bulk keg of 8000 or 10000

BAR Barrel Barrel of 20000, 25000 or 45000

NEW

4

Ordering Information

833

Note: Refer to page 24 for related Wire Combination Reference Guide.

External Cap• Ergonomic wing design gives you a comfortable grip

and more torque than the competition. The ergonomicshape reduces finger fatigue from repetitive installations.

• The ergonomic wing shape allows excellent torque gripfor your fingers as well as the option to use a standard 1/2"or 13mm hex driver to help twist the Marrette.

• Made of durable polypropylene and 105°C rated towithstand high installation pressures.

• Deep wide throat ensures full insulation coverage.• Highly visible yellow colour: indicative of a secure

connection for residential applications.Inner Spring• Exclusive Live Action variable volume spring expands to

accommodate even more wires with less twisting effortcompared to other wide range wire connectors.

• Range: #22 to #8, with no pretwisting.• The square wire spring construction and funnel design gives a

positive pressure conductor grip for solid or stranded wires• Dichromate Finished Spring provides more than 10 times the

protection against corrosion compared to standard zinc platedsprings. The 833 corrosion resistant spring has been subjectedto salt spray tests conducted according to ASTM specificationB-117.

• CSA (LR6591), UL (424H) approved for circuits up to 600V andlighting fixtures and signs up to 1000V.

• For Copper wire only.• Convenient packaging - sized right and job-site ready!

The ResiMarr® 833 is the residential Marrette. The 833ergonomic wing design can take a wide range ofcombinations from #22 to #8.

AWG Wire RangeModel Colour 22 20 18 16 14 12 10 8

833 yellow

Drivers

TOOL-WING Driver for winged Marrettes.

Can also be used with1/2” or 13mm nut driver.

POSI-GRIP TM SURFACE

ERGONOMICWING DESIGN

WIDER WING SPANOFFERS MORE TORQUE

LIVE ACTION TM

VARIABLE VOLUME

833

5

Packaging Optionsresimarr® 833

Catalogue Packaging Quantity Std. Pkg. Number Format per Package (Min./Mult.)

833P Propak 100 1000833KP Resealable Bag 500 5000833D Flip-Pak 500 500833M Flip-Pak 1000 1000833BK Flip-Pak Keg 10000 10000833BAR Barrel 25000 25000

6

Marrette® XTP®


Note: Refer to pages 21, 22 and 23 for related Wire Combination Reference Guides.

* Not UL Listed

External Cap• Made of tough, durable polypropylene and 105°C-rated

to withstand high installation pressures.• Posi-GripTM surface combines a matte finish with

closely-spaced, deep grooves for superior twisting power,even when hands are greasy or damp.

• Deep, wide throat ensures full insulation coverage.• Threaded entry helps guide large wire bundles

into the spring chamber.• Colour-coded for quick and easy size selection.Inner Spring• Exclusive Live ActionTM variable volume spring expands

to accommodate more wires with less twisting effort,compared to other connectors with a “fixed spring” design.

• Models nos. 329 & 330 have a round spring, while 331, 333 & 335 have a square wire spring construction that gives apositive conductor bite to solid or stranded wires.

• Unique copper-coated spring helps resist corrosion.• CSA (LR6591), UL (424H) — Models nos. 329 & 330 are

approved for circuits up to 300V only. — Models nos. 331, 333,335 and 822 are approved for circuits up to 600V, and lighting fixtures and signs up to 1000V.

• For copper wire only.• Convenient packaging - sized right and job-site ready!

POSI-GRIP TM SURFACE

LIVE ACTION TM

VARIABLE VOLUME SPRING

THREADED ENTRY

DEEP WIDETHROAT

The Marrette® XTP® is a high quality, twist-on wireconnector with a unique spring and cap grip design thatsets it apart from the competition.


329 grey

330 blue

331 orange

333 yellow

335 red

822* blue

Drivers

TOOL 331 Plastic driver to install Model 331

TOOL 333 Plastic driver to install Model 333 and 822

TOOL 335 Plastic driver to install Model 335

7

Packaging OptionsMarrette® XTP®

329

330

331

333

335

822


329P Propak 100 1000 Units329BP Bulk Box 1000 1000 Units

330P Propak 100 1000 Units330BP Bulk Box 1000 1000 Units330BK Bulk Keg Box 10000 10000 Units

331C Card 20/Card 20 Cards331B Window Box 50/Box 10 Boxes331P Propak 100 1000 Units331D Flip-Pak 500 2000 Units331KP Resealable bag 500 5000 Units331M Flip-Pak 1000 1000 Units331BK Flip-Pak Keg 10000 10000 Units331BAR Barrel 45000 45000 Units

333C Card 15/Card 20 Cards333B Window Box 50/Box 10 Boxes333P Propak 100 1000 Units333KP Resealable bag 500 5000 Units333D Flip-Pak 500 500 Units333M Flip-Pak 1000 1000 Units333BK Flip-Pak Keg 10000 10000 Units333BAR Barrel 25000 25000 Units

335C Card 6/Card 20 Cards335B Window Box 25/Box 10 Boxes335P Propak 100 1000 Units335Q Flip-Pak 200 800 Units335D Flip-Pak 500 500 Units335BK Flip-Pak Keg 8000 8000 Units

822Q Flip-Pak 200 800 Units822D Flip-Pak 500 500 Units822BK Flip-Pak Keg 8000 8000 Units822BAR Barrel 20000 20000 Units

IMPORTANT: C/B/Flip-Pak = Order by number of cards or boxes.

8

Marrette® Type II® Winged

External Cap• Made of tough, durable polypropylene and 105°C-rated

to withstand high installation pressures.• Long-WingTM design for smooth hand application. The long,

off-set wings with raised edges offer a full-length, “finger-friendly”gripping surface.Torque can be selectively applied exactlywhere you want it:

• Top - for tight finger locations• Bottom - for large wire bundles

• Ribbed body surface gives additional grip,even when hands are greasy or damp.

• Deep, wide throat ensures full insulation coverage.• Threaded entry helps guide large wire bundles

into the spring chamber.• Colour-coded for quick and easy size selection.

Inner Spring• Live ActionTM variable volume spring expands to

accommodate a wide range of wire combinations.• Square wire construction gives a positive conductor bite

to solid or stranded wires. • Unique copper-coated spring helps resist corrosion.• CSA (LR6591), UL (424H) - approved for circuits up to

600V, and lighting fixtures and signs up to 1000V.• For copper conductors only.• Convenient packaging-sized right and job-site ready!

LONG-WING TM DESIGN

LIVE ACTION TM

VARIABLE VOLUME SPRING

THREADED ENTRY

DEEP WIDETHROAT

The Marrette® Type II® Winged wire connector is designengineered for additional twisting power to meet the highquality expectations of the electrical professional.


Note: Refer to pages 22 and 23 for related Wire Combination Reference Guides.

AWG Wire RangeModel Colour 22 20 18 16 14 12 10 8 6

733 yellow

735 red

739 blue

622 MAXX tan

Drivers

TOOL-WING Plastic driver to install modes #733, 735, 739 and 622

735

733

739

622MAXX

9

Packaging OptionsMarrette® Type II® Winged


733C Card 15/Card 20 Cards733P Propak 100 1000 Units733KP Bag 500 5000 Units733M Masterpak 1000 3000 Units

735C Card 15/Card 20 Cards735P Propak 100 1000 Units735KP Bag 500 5000 Units735M Masterpak 500 1500 Units

739C Card 3/Card 20 Cards739P Propak 50 500 Units739Q Flip-Pak 250 250 Units

622P Propak 100 1000 Units622KP Bag 500 5000 Units

10

Marrette® Black™ High Temperature

External Cap• Made of rugged, phenolic material - 150°C rated.• Large, finely ribbed, “barrel-shaped” cap - makes it easier

to grip even when hands are greasy or damp.• Deep, wide throat ensures full insulation coverage.• Threaded entry helps guide large wire bundles right into the spring.

Inner Spring • Internal round spring design multiplies the “twist-on” torque

applied by the leverage and wedge action, to firmly crushwires into a solid joint.

• Model # 37 BlackTM - uses a square wire expansionspring for additional grippingpower on large conductorcombinations.

• Unique copper-coated spring helps resist corrosion.• CSA (LR6591), UL (424H) - Model nos. 29 & 30 BlackTM are

approved for circuit and fixture typeconnections up to 300V only.

• Model nos. 31, 33, 35 & 37 BlackTM are approved for circuits up to 600V, and lighting fixtures and signs up to 1000V.

• For copper conductors only.• Convenient packaging - sized right and job-site ready!

The Marrette® Black™’s High Temperature rating makes itthe best solution for high wattage lighting fixtures and signs.

HIGH TEMPERATUREPHENOLIC CAP

CONICAL SPRINGDESIGN

THREADED ENTRY

DEEP WIDETHROAT


Note: Refer to pages 20 and 21 for related Wire Combination Reference Guides.


29 black

30 black

31 black

33 black

35 black

37 black

29

31

30

37

33

35

11

Packaging OptionsMarrette® Black™ High Temperature


29P Propak 100 100029BP Bulk Box 1000 100029BK Flip-Pak 5000 5000

30P Propak 100 100030BP Bulk Box 1000 100030BK Flip-Pak 5000 5000

31P Propak 100 100031KPS Bag 500 500031BP Bulk Box 1000 100031BK Flip-Pak 10000 1000031D Flip-Pak 500 500

33P Propak 100 100033BP Bulk Box 1000 100033BK Flip-Pak 5000 500033D Flip-Pak 500 500

35P Propak 100 100035BK Flip-Pak 5000 500035D Flip-Pak 500 50035Q Flip-Pak 200 800

37P Propak 50 50037Q Flip-Pak 250 250

12

Porcelain Extreme High Temperature

Cap• Made of porcelain - rated up to 645°C (1200°F)• Closely space groves for excellent twisting power• Deep wide throat ensures full insulation coverage• Funneled entry helps wires into threaded compression

compartment• Springless - Inner surface of cap threaded to secure

conductors with the same efficiency as a spring.• 300 Volt rated• CSA, UL 486C for stranded wire only

The porcelain extreme high temperature wire connector isthe solution for high temperature furnace/oven or otherintense heat applications up to 645°C (1200°F).




Hi-1 white

Hi-5 white

Hi-7 white

HARDENEDPORCELAIN THREADS

EXCELLENT GRIP

DEEP WIDE THROAT

13

Packaging OptionsMarrette® Porcelain

Hi-1

Hi-7

Hi-5


10-401 Box 100 10010-411 Box 1000 100010-421 Box 10000 10000

10-405 Box 100 10010-415 Box 1000 100010-425 Box 5000 5000

10-407 Box 100 10010-417 Box 1000 100010-427 Box 5000 5000

14

Marrette® ACS™ Aluminum Wiring

External Cap• Made of sturdy, dark brown, phenolic material

- rated at 150°C.• Large, finely ribbed, “barrel-shaped” cap - makes it easier

to grip even when hands are greasy or damp.• Deep, wide throat ensures full insulation coverage.• Threaded entry helps guide large wire bundles

right into the spring.

Inner Spring• Made of a special copper alloy and then plated with a thick

coating of tin to satisfy the rigorous standards establishedfor aluminum wire connections.

• Round wire construction ensures that aluminum conductorsand highly stranded copper wires are not scored or severed when joined.

• CSA (LR6591) - approved for circuits up to 600V, and lighting fixtures and signs up to 1000V.

• Approved for aluminum - to - aluminum, copper - to - copper,aluminum - to - copper (or highly stranded copper) connection.

• Convenient packaging - sized right and job-site ready!

150°C RATEDPHENOLIC CAP

SPRING APPROVED FOR ALUMINUMWIRE CONNECTIONS

THREADED ENTRYDEEP WIDE

THROAT

The Marrette® ACS™ Aluminum Wiring wire connector is afixed spring, twist-on connector made of special springwire materials and coatings, to meet the rigorousstandards for aluminum wire connections.




63 brown

65 brown

63

65

15

Packaging OptionsMarrette® ACS™ Aluminum Wiring


63P Propak 100 100063D Flip-Pak 500 50063C Card 6/Card 20 Cards63B Window Box 25/Box 10 Boxes

65P Propak 100 100065D Flip-Pak 500 50065C Card 6/Card 20 Cards

16


Marrette® Set-Screw Vibration Proof /Visible Connection

External Cap• Made of rugged, phenolic material and 150°C-rated.• Insulator cap locks securely in place to safeguard against

accidental loosening in high vibration applications.

Brass Insert• Choice of Slot or Robertson Set Screw. When tightened into

the insert, provides a solid pressure type connection on allapproved wire combinations.

• No need to “re-strip” wires when rewiring.Simply loosen set screw to remove non-twisted wires.

• Special copper-coated spring helps resist corrosion.• CSA (LR6591), UL (424H) - approved for circuits up to 600V,

and lighting fixtures and signs up to 1000V.• For copper wire only.• Convenient packaging - sized right and job-site ready!

The Marrette® Set-Screw is a two-piece, pressure typeconnector, featuring a solid brass insert with a screw-oninsulating cap. It’s the perfect choice when changing amotor, adding a circuit, conducting instrument testing orsimply lashing-up temporary wiring.

SEPARATE BRASSINSERT

150°C RATEDPHENOLIC CAP


AWG Wire RangeModel Screw Head 16 14 12 10 8

11i

1SH1SHI

22i

2SH2SHi

Small slot-head.Insert screw & brass barrel only.

Small Robertson.Insert screw & brass barrel only.

Large slot-head.Insert screw & brass barrel only.

Large Robertson.Insert screw & brass barrel only.

1

1SH

2

2SH

1

1SH

2

2SH

17

Packaging OptionsMarrette® Set-Screw Vibration Proof / Visible Connection


1P Propak 100 10001D Flip-Pak 500 500

1SHP Propak 100 10001SHD Flip-Pak 500 500

2P Propak 50 5002D Flip-Pak 500 500

2SHP Propak 50 5002SHD Flip-Pak 500 500

1i Carton 100 1000

1SHi Carton 1000 1000

2i Carton 50 1000

2SHi Carton 1000 1000

INSERT SCREWS AND BRASS BARRELS ONLY.

18

Marrette® GreenGrounding Wire Connectors


External Cap• Made of tough durable polyproplene and rated

105°C rated to withstand high installation pressure.• Long-Wingtm design affords installer good

levevage to make ground connections.• Swept back wing creates less box fill.• Top exit hole to allow one main grounding conductor

to attach to grounding screw, from a large groundingwire bundle.

Inner Spring• Square wire construction gives a positive conductor bite to

grounding wire.• Unique copper coated spring helps resist corrosion.• CSA (File LR-6591 class 6223-02)

UL listed (File E-19851)• For copper wire only• Convenient packaging - sized right and job-site ready!

The Marrette Green grounding connector accomodates 14to 10 AWG ground wires.


1410 green


LONG-WING TM DESIGN

THREADED ENTRY

DEEP WIDE THROAT

LIVE ACTION TM

VARIABLE VOLUMESPRING

19

Packaging OptionsMarrette® Green

1410


1410P Propak 100 10001410KP Bag 250 2500

20

29

No. of with No. of or No. ofWires / Gauge Wires / Gauge Wires / Gauge

3-5 #222-4 #20

3 #20 1-2 #222 #20 1-3 #221 #20 1-4 #22

2-3 #182 #18 1 #202 #18 1-2 #221 #18 1-2 #20 or 1-4 #221 #18 1 #20 + 1 #222 #161 #16 1 #20 or 1 #181 #16 1-3 #22 or 1 #20 + 1 #22

30


3-5 #204 #20 1 #223 #20 1-2 #222 #20 2-3 #221 #20 4 #22

2-4 #184 #18 1 #223 #18 1-2 #20 or 1-2 #221 #18 1-4 #20 or 1-5 #22

2-3 #162 #16 1 #18 or 1-2 #202 #16 1-3 #221 #16 1-2 #18 or 1-4 #201 #16 1-4 #221 #14 1 #16 or 1 #181 #14 1-3 #20 or 1-4 #22

31


2-5 #18

1-3 #18 1-2 #16

1-3 #18 1 #14

2-4 #16

1-3 #16 1 #18

1-2 #16 1 #14

2 #14

2 #14 1 #18

33


5-6 #182-4 #18 1-2 #16

2 #18 2-4 #161-4 #18 1 #143-5 #161-4 #16 1 #142-4 #14

3 #14 1 #16 or 1 #182 #14 1-3 #18 or 1-3 #162 #121 #12 1-2 #14 or 1-3 #161 #12 1-4 #18

Wire Combination Reference Guide

1No. of with No. of or No. of

Wires / Gauge Wires / Gauge Wires / Gauge

2-8 #181-3 #18 1 #141-2 #18 2 #142-6 #161-2 #16 1 #142-4 #14

3 #14 1 #182 #122 #12 1 #18

2

No. of with No. ofWires / Gauge Wires / Gauge

2-3 #16 1 #141-2 #16 2 #142-6 #141-4 #14 1 #121-2 #14 2 #122-4 #12

2 #12 1 #101-2 #12 1 #14

2 #102 #10 1 #14

1-2 #10 1 #12

21


329


3-5 #222-4 #20

3 #20 1-2 #222 #20 1-3 #221 #20 1-4 #22

2-3 #182 #18 1 #202 #18 1-2 #221 #18 1-2 #20 or 1-4 #221 #18 1 #20 + 1 #222 #161 #16 1 #20 or 1 #181 #16 1-3 #22 or 1 #20 + 1 #22

330


3-5 #204 #20 1 #223 #20 1-2 #222 #20 2-3 #221 #20 4 #22

2-4 #184 #18 1 #223 #18 1-2 #20 or 1-2 #221 #18 1-4 #20 or 1-5 #22

2-3 #162 #16 1 #18 or 1-2 #202 #16 1-3 #221 #16 1-2 #18 or 1-4 #201 #16 1-4 #221 #14 1 #16 or 1 #181 #14 1-3 #20 or 1-4 #22


Wires / Gauge Wires / Gauge Wires / Gauge5-8 #16

4 #16 2 #182-6 #14

6 #14 1-2 #18 or 1-2 #165 #14 1 #18 or 1 #164 #14 1-3 #18 or 1-3 #16

2-4 #123 #12 1-3 #18 or 1-3 #163 #12 1-2 #142 #12 1-3 #14 or 1-5 #182 #12 1-5 #161 #12 1-5 #143 #10 1 #183 #102 #10 1 #122 #10 1-2 #14 or 1-3 #162 #10 1-4 #181 #10 1-2 #12 or 1-3 #141 #10 1-6 #18 or 1-6 #16



3-5 #12

4 #12 1 #14

3 #12 1-2 #14

2 #12 1-3 #14

2-3 #10

3 #10 1 #12 or 1 #14

2 #10 1-2 #12 or 2-3 #14

1 #10 2-4 #12 or 4 #14

2 #8

1 #8 1-2 #10 or 1-3 #12

1 #8 1-3 #14

63


5-6 #182-4 #18 1-2 #16

2 #18 1-3 #161-4 #18 1 #143-5 #161-3 #16 1 #142-4 #14

3 #14 1 #16 or 1-2 #182 #14 1-3 #18 or 1-2 #162 #122 #12 1 #18 or 1 #161 #12 1-2 #14 or 1-3 #161 #12 1-3 #18



5-7 #164 #16 2 #18

2-6 #146 #14 1 #18 or 1 #165 #14 1 #18 or 1 #164 #14 1-3 #18 or 1-3 #16

2-4 #123 #12 1-3 #18 or 1-3 #163 #12 1 #142 #12 1-3 #142 #12 1-5 #18 or 1-5 #161 #12 1-5 #142 #10 1 #14 or 1-2 #162 #10 1-4 #181 #10 1-2 #12 or 1-3 #141 #10 1-6 #18 or 1-6 #16

Note : Aluminum to Highly Stranded Copper

1 no. 12 with 1 no. 14 (41 strands) Note : Aluminum to Highly Stranded Copper

1 no. 12 with 1 no. 14 (41 strands)1 no. 12 with 1 no. 12 (65 strands)2 no. 12 with 1 no. 14 (41 strands)1 no. 10 with 1 no. 12 (65 strands)2 no. 10 with 1 no. 12 (65 strands)

22


331


2-5 #18

1-3 #18 1-2 #16

1-3 #18 1 #14

2-4 #16

1-3 #16 1 #18

2 #16 1 #14

1 #16 1 #14

2-3 #14

2 #14 1-2 #18 or 1 #16

333


5-6 #182-4 #18 2 #16 or 1 #141-3 #18 2 #14 or 1 #123-5 #162-4 #16 2 #18 or 1 #141-3 #16 2 #14 or 1 #121-2 #16 2 #122-4 #14

4 #14 1 #183 #14 1 #18 or 1 #16

1-2 #14 1 #12 or 1 #102 #122 #12 1 #18 or 1 #141 #10 1 #12

335


1-5 #18 2 #122-4 #18 2 #161-3 #18 3 #16 or 3 #141-3 #18 3 #124-6 #161-5 #16 2 #12

5 #16 1 #184 #16 1-2 #18

1-3 #16 3 #14 or 3 #125 #14 1 #184 #14 1-2 #18 or 1 #16

1-5 #14 1 #121-4 #14 2 #12 or 1 #10

2 #124 #12 1 #143 #12 1-2 #14

1-3 #12 1 #102-3 #10

2 #10 1-2 #14 or 1 #121 #8 1-2 #12 or 1 #10



2-4 #181-3 #18 1 #16 or 1 #141-3 #18 1 #12 or 2 #142-3 #161-3 #16 1 #14 or 1 #122-4 #14

3 #14 1 #182-3 #14 1 #161-3 #14 1 #122-3 #12

1 #10 1-2 #16 or 1-2 #141 #10 1 #12

622


4-5 #222 #20*

2-5 #201 #20 2-4 #222 #20 1-3 #223 #20 1-2 #224 #20 1 #22

2-6 #181 #18 2-4 #20 or 222 #18 1-3 #20 or 223 #18 1-2 #20 or 224 #18 1 #20 or 22

2-5 #161 #16 2-4 #18, 20 or 222 #16 1-4 #183 #16 1-3 #18 or 2 #20 or 224 #16 1-2 #185 #16 1 #18

2-4 #141 #14 2-3 #18 or 2-4 #182 #14 1-3 #16 or 1-2 #183 #14 1-2 #164 #14 1 #16

2-5 #121 #12 2-4 #14 or 16 or 1-5 #182 #12 1-3 #14 or 16 or 1-2 #183 #12 1-2 #14, 16 or 184 #12 1 #14 or 16

2-3 #101 #10 2 or 3 #12 or 2-5 #141 #10 2 #162 #10 1 #12 or 1-2 #14 or 161 #8** 2 #12 or 2-3 #141 #8** 2-4 #16

2 #81 #6** 1 #10 or 1 or 2#12

* Solid only** Stranded only

23


822No. of Wires / Gauge with No. of Wires / Gauge or No. of Wires / Gauge or No. of Wires / Gauge or No. of Wires / Gauge

4-5#224#22 1#20 1#18 1#163#22 1-2#20 1-2#18 1#162#22 1-3#20 1-3#18 1-3#161#22 2-4#20 2-4#18

3-5#204#20 1#18 1#163#20 1-2#18 1#162#20 1-3#18 1-3#161#20 2-4#18

2-6#185#18 1#124#18 1-2#16 1#123#18 1-3#16 1#14 1#122#18 1-4#16 1-2#14 1-3#121#18 1-5#16 2#14 1-3#12

2-5#164#16 1#14 1#12 1#83#16 1-2#14 1-2#12 1#82#16 1-3#14 1-3#12 1-2#10 1#81#16 2-4#14 2-4#12 2#10

2-4#145#14 1#104#14 1#12 1#103#14 1-2#12 1#10 1#82#14 1-3#12 1-2#101#14 2-4#12 2#10

2-5#123#12 1#102#12 1#10 1#81#12 2#10

2-3#102#8 (stranded only)

735


4-6 #162-6 #142-5 #12

1 #12 2-5 #18 or 1-5 #161 #12 1-5 #142 #12 1-5 #16 or 1-4 #143 #12 1-3 #18 or 1-2 #163 #12 1-2 #144 #12 1 #14

2-3 #101 #10 1-6 #16 or 1-5 #141 #10 1-3 #122 #10 1-5 #16 or 1-3 #142 #10 1-2 #12

2 #81 #8 1-2 #12 or 1 #10



5-6 #143-6 #12

2 #12 2-4 #143 #12 1-3 #14

2-5 #101 #10 3-5 #14 or 2-4 #122 #10 1-4 #14 or 1-3 #123 #10 1-3 #144 #10 1 #12

2-3 #81 #8 1-3 #102 #8 1-4 #14 or 1-3 #122 #8 1-2 #102 #61 #6 1-3 #12 or 1-2 #101 #6 1-2 #8

24




2-5 #14

2-5 #12

1 #12 1-4 #14

2 #12 1-3 #14

3 #12 1-2 #14

4 #12 1 #14

1 #10 1 #12 & 1-3 #14 or 1-2 #12 & 1-2 #14

1 #10 1-3 #12 & 1 #14 or 1-4 #14

1 #10 1-3 #12

2 #10 1-3 #14 or 1 #12 & 1 #14

2-3 #10

833No. of Wires / Gauge with No. of Wires / Gauge or No. of Wires / Gauge or No. of Wires / Gauge or No. of Wires / Gauge

3-5#224#22 1#20 1#18 1#163#22 1-2#20 1-2#18 1#162#22 1-3#20 1-3#18 1-3#161#22 2-4#20 2-4#18

2-5#204#20 1#18 1#163#20 1-2#18 1#162#20 1-3#18 1-3#161#20 2-4#18

2-6#185#18 1#124#18 1-2#16 1#123#18 1-3#16 1#14 1#122#18 1-4#16 1-2#14 1-3#121#18 1-5#16 2#14 1-3#12

2-5#164#16 1#14 1#12 1#83#16 1-2#14 1-2#12 1#82#16 1-3#14 1-3#12 1-2#10 1#81#16 2-4#14 2-4#12 2#10

2-5#144#14 1#123#14 1-2#12 1#10 1#82#14 1-3#12 1-2#101#14 2-4#12 2#10

2-4#123#12 1#102#12 1#10 1#81#12 2#10

2-3#10

25


Hi-7 Stranded wire onlyNo. of with No. of or No. of


2-5 #181-3 #18 1 #16 or 1 #14

1 #18 2-3 #16 or 2 #142-4 #161-2 #16 1 #14

2 #141 #12 1 #18 or 1 #16



2-4 #18

2 #18 1 #16

1 #18 2 #16 or 1 #14

2 #16



2-4 #18

1-3 #18 1 #16

1-2 #18 1 #16 or 1 #14

2-3 #16

1 #16 1 #14

26

Cat. No. Page Cat. No. Page Cat. No. Page

10-401 . . . . . . . . . . . . . .12-1310-405 . . . . . . . . . . . . . .12-1310-407 . . . . . . . . . . . . . .12-1310-411 . . . . . . . . . . . . . .12-1310-415 . . . . . . . . . . . . . .12-1310-417 . . . . . . . . . . . . . .12-1310-421 . . . . . . . . . . . . . .12-1310-425 . . . . . . . . . . . . . .12-1310-427 . . . . . . . . . . . . . .12-131410KP . . . . . . . . . . . . .18-191410P . . . . . . . . . . . . . . .18-191D . . . . . . . . . . . . . . . . . .16-171i . . . . . . . . . . . . . . . . . .16-171P . . . . . . . . . . . . . . . . . .16-171SHD . . . . . . . . . . . . . . .16-171SHi . . . . . . . . . . . . . . . .16-171SHP . . . . . . . . . . . . . . .16-1729BK . . . . . . . . . . . . . . .10-1129BP . . . . . . . . . . . . . . .10-1129P . . . . . . . . . . . . . . . . .10-112D . . . . . . . . . . . . . . . . . .16-172i . . . . . . . . . . . . . . . . . .16-172P . . . . . . . . . . . . . . . . . .16-172SHD . . . . . . . . . . . . . . .16-172SHi . . . . . . . . . . . . . . . .16-172SHP . . . . . . . . . . . . . . .16-1730BK . . . . . . . . . . . . . . .10-1130BP . . . . . . . . . . . . . . .10-1130P . . . . . . . . . . . . . . . . .10-1131BK . . . . . . . . . . . . . . .10-1131BP . . . . . . . . . . . . . . .10-1131D . . . . . . . . . . . . . . . . .10-1131KPS . . . . . . . . . . . . . .10-1131P . . . . . . . . . . . . . . . . .10-11329BP . . . . . . . . . . . . . . . .6-7329P . . . . . . . . . . . . . . . . . .6-7330BK . . . . . . . . . . . . . . . .6-7330BP . . . . . . . . . . . . . . . .6-7330P . . . . . . . . . . . . . . . . . .6-7331B . . . . . . . . . . . . . . . . . .6-7

331BAR . . . . . . . . . . . . . . .6-7331BK . . . . . . . . . . . . . . . .6-7331C . . . . . . . . . . . . . . . . . .6-7331D . . . . . . . . . . . . . . . . . .6-7331KP . . . . . . . . . . . . . . . .6-7331M . . . . . . . . . . . . . . . . .6-7331P . . . . . . . . . . . . . . . . . .6-7333B . . . . . . . . . . . . . . . . . .6-7333BAR . . . . . . . . . . . . . . .6-7333BK . . . . . . . . . . . . . . . .6-7333C . . . . . . . . . . . . . . . . . .6-7333D . . . . . . . . . . . . . . . . . .6-7333KP . . . . . . . . . . . . . . . .6-7333M . . . . . . . . . . . . . . . . .6-7333P . . . . . . . . . . . . . . . . . .6-7335B . . . . . . . . . . . . . . . . . .6-7335BK . . . . . . . . . . . . . . . .6-7335C . . . . . . . . . . . . . . . . . .6-7335D . . . . . . . . . . . . . . . . . .6-7335P . . . . . . . . . . . . . . . . . .6-7335Q . . . . . . . . . . . . . . . . .6-733BK . . . . . . . . . . . . . . .10-1133BP . . . . . . . . . . . . . . .10-1133D . . . . . . . . . . . . . . . . .10-1133P . . . . . . . . . . . . . . . . .10-1135BK . . . . . . . . . . . . . . .10-1135D . . . . . . . . . . . . . . . . .10-1135P . . . . . . . . . . . . . . . . .10-1135Q . . . . . . . . . . . . . . . .10-1137P . . . . . . . . . . . . . . . . .10-1137Q . . . . . . . . . . . . . . . .10-11622KP . . . . . . . . . . . . . . . .8-9622P . . . . . . . . . . . . . . . . . .8-963B . . . . . . . . . . . . . . . . .14-1563C . . . . . . . . . . . . . . . . .14-1563D . . . . . . . . . . . . . . . . .14-1563P . . . . . . . . . . . . . . . . .14-1565C . . . . . . . . . . . . . . . . .14-1565D . . . . . . . . . . . . . . . . .14-1565P . . . . . . . . . . . . . . . . .14-15

733C . . . . . . . . . . . . . . . . . .8-9733KP . . . . . . . . . . . . . . . .8-9733M . . . . . . . . . . . . . . . . .8-9733P . . . . . . . . . . . . . . . . . .8-9735C . . . . . . . . . . . . . . . . . .8-9735KP . . . . . . . . . . . . . . . .8-9735M . . . . . . . . . . . . . . . . .8-9735P . . . . . . . . . . . . . . . . . .8-9739C . . . . . . . . . . . . . . . . . .8-9739P . . . . . . . . . . . . . . . . . .8-9739Q . . . . . . . . . . . . . . . . .8-9822BAR . . . . . . . . . . . . . . .6-7822BK . . . . . . . . . . . . . . . .6-7822D . . . . . . . . . . . . . . . . . .6-7822Q . . . . . . . . . . . . . . . . .6-7833BAR . . . . . . . . . . . . . . .4-5833BK . . . . . . . . . . . . . . . .4-5833D . . . . . . . . . . . . . . . . . .4-5833KP . . . . . . . . . . . . . . . .4-5833M . . . . . . . . . . . . . . . . .4-5833P . . . . . . . . . . . . . . . . . .4-5Hi-1 Model . . . . . . . . . . .12-13Hi-5 Model . . . . . . . . . . .12-13Hi-7 Model . . . . . . . . . . .12-13TOOL 331 . . . . . . . . . . . . . . .6TOOL 333 . . . . . . . . . . . . . . .6TOOL 335 . . . . . . . . . . . . . . .6TOOL-WING . . . . . . . . . . . .4-8

Alphanumerical Index

the bestselection of qualitytwist-on wire connectors under...

Documents