Battpac® Battery Powered Compression and Cutting Tools

Tools for Industrial Electrical Applications

Battpac® Tools

Put some power in your grip and pick up a Battpac® tool from Thomas & Betts. Lightweight,including the battery, Battpac® tools put the powerin your hand, when and where you need it most.You’re also left with a hand free to control the operation. Best of all, Battpac® tools are affordably priced.

•Singled-handed operation for maximum ease and comfort.

•Well-balanced tool for greater control during operation.

•Rotating crimping head for easy access in confined spaces.

•Maximum pressure relief valve insures correctcrimping.

•Quiet, vibration-free crimping cycle for smoothinstallation.

•Integral battery gauge insures that you’re alertedto power conditions.

•Utilizes Ni-Cd 14.4V battery.•Unique die design to optimize the number of crimps between recharges.

•Sturdy molded body to last a lifetime of crimping in most conditions.

28

TBM54BSCT Cutting Tool•Lightweight and fast cycle tool that cuts copper,aluminum and ACSR*.

•Maximum diameter cut of 2-1/8 in. with 750 KCMILcopper and 636 KCMIL ACSR.

•Includes carrying case, charger, two batteries andcarry strap.

* Add suffix “S” (TBM54BSCTS) for use with steel cable.

TBM58BSCT and TBM40BSCTBattery Powered Cutters

Tools for Industrial Electrical Applications

Battpac® Tools

•Designed for one-hand operation.•Ideally suited for aerial bucket work and trench operations.

•Insulated, forged steel head rotates 180° for quickaccess in confined spaces.

•TBM58BSCT cuts ACSR, aluminum and coppercables up to 1-1/2 in., and regular guy wires andground rods up to 5/8 in.*.

•TBM40BSCT cuts aluminum and copper strands upto 1-1/2 in., ACSR cables up to 3/4 in., and regularguy wires and ground rods up to 1/2 in.

•Built-in by-pass pops off if material is beyond thecutters capacity. It is not recommended to cut hardened steel as it may damage blades.

TBM6BSCR 6-Ton Compression Tool•Dies are interchangeable with TBM6H RemoteHydraulic Tool.

•Installs #8 AWG through 500 KCMIL copper connectorsand to 400 KCMIL aluminum.

•Insulated open forged steel head rotates 180º.•Rated for 10,000 PSI.•C-tap and H-tap type connector crimping.•Includes carrying case, charger, two batteries andcarry strap.

29

Cutting Capacities TBM58BSCT TBM40BSCTin. mm in. mm

Soft steel bolts 5/8 16 11/16 17Rebar and ground rod 5/8 16 1/2 13ACSR 1-1/2 40 3/4 20CU and AL strands 1-1/2 40 1-1/2 20Standard guy wire 5/8 16 5/8 14Wire rope 3/4 20 3/4 20EHS guy wire do not cut

Tools for Industrial Electrical Applications

Battpac® Tools

•Installs #8 AWG through 900 KCMIL copper connectors and 750 KCMIL aluminum.

•Insulated open forged steel head rotates 180º.•Rated for 10,000 PSI.•Includes carrying case, charger, two batteries andcarry strap.

30

•Dies are interchangeable with TBM15i RemoteHydraulic Tool.

•Installs #8 AWG through 1500 KCMIL copper connectorsand 1000 KCMIL aluminum.

•Insulated easy latched forged steel head rotates 180º.•Rated for 10,000 PSI.•Includes carrying case, charger, two batteries and carry strap.

TBM15BSCR 15-Ton Compression Tool

TBM14BSCR 14-Ton Compression Tool

TBM62BSCR 6-Ton Compression Tool•Installs #8 AWG through 500 KCMIL copper connectors.•180º rotating head.•Rated for 10,000 PSI.•Includes carrying case, charger, two batteries andcarry strap.

•TBM6240BSCR — includes dies up to 4/0 AWG.•TBM62500BSCR — includes dies up to 500 MCM.

BPLT54BSCT 6-Ton Fast Cycle Cutting Tool

Tools for Industrial Electrical Applications

Battpac® Tools

•Cuts copper and aluminum with a maximum cutdiameter of 2-1/8 in. and 750 KCMIL copper.

•Lightweight — weighs only 4.8 lb.•Includes carrying case, charger, two batteries andcarry strap.

BPLT40BSCT 6-Ton Cutting Tool•Forged steel head and cutter blades; head can berotated 180°.

•Cuts copper, aluminum, steel, rebar, ACSR and wirerope with a maximum cut diameter of .75 in.

•Lightweight — weighs only 9.5 lb with battery.•Includes carrying case, charger, two batteries and carry strap.

BPLT58BSCT 8-Ton Cutting Tool•Two forward speeds.•Forged steel head and cutter blades; head can berotated 90°.

•Cuts copper, aluminum, steel, rebar, ACSR and wire rope with a maximum cut diameter of 1.5 in.

•Lightweight — weighs only 17.2 lb with battery.•Includes carrying case, charger, two batteries and carry strap.

31

Tools for Industrial Electrical Applications

Battpac® Tools

TBM8-750BSCR 12-Ton Compression Tool•Dieless crimping.•Range Taking Smart ® tool (Connector DiameterSensing) crimping #8 AWG through 750 KCMILcopper and aluminum connectors.

•The only additional die sets required are for H-and C-type compression taps:

- TBM8-750CL die for C-taps 54755 to 54775- TBM8-750HG die for H-taps 63110 to 63118

and 63125- TBM8-750HB die for H-taps 63140 to 63148- TBM8-750G gauge for tool calibration

•Open forged steel head rotates 180º.•Rated for 10,000 PSI.•Includes carrying case, charger, two batteries and carry strap.

32

BPLT14BSCR 14-Ton Compression Tool•Dies are interchangeable with TBM14M MechanicalHydraulic Tool.

•Installs #8 AWG through 900 KCMIL copper connectors and 750 KCMIL aluminum.

•180º rotating head.•Rated for 10,000 PSI.•Includes carrying case, charger, two batteries and carry strap.

•Lightweight — weighs only 15.4 lb with battery.