The allotmenthouseJekaterina BulgarinaNara MovsisyanJonas HornehojVladislav Nedelev1 J class

Location:

The Assignment Placement and localisation of the lot (300-400m2) The building can be max. 30 m2 excl. possible tool room

and roof over the terrace The building is going to be made if timber and its cladding

should be of wood The roof should be covered with asphalt felt or with grass The building cant be higher than 5,5 m from the ground External surfaces should be in the colours white, black or

earthen colours. For doors and windows and minor parts other colours can be used

Situation plan of the lot inclusive the building in scale 1:100 Plan-, section, and elevations in scale 1:50 A model is going to be made in scale 1:50

Idea:

Challenges: Agreeing as a group on the design\ Building a model Managing the roof and agreeing on a

design for it Getting started on Revit Complex windows – hard on Revit Working as a group and agreeing on

ideas and concepts Time management

Our

plan

2D

Our plan 3D

Materials: Foundation –combined concrete and

light weight thermo block Main material – Wood Windows – glazing windows (curtain wall

exterior) Roof – timber and tile Chimney – Black Iron

Why Wood? Comfortable and cozy Attractive looking Good aromat Passes through a third of the air Contributes to vent the room In wet weather absorbs excess moisture Dries out at elevated temperatures Tannins contained in the tree has antiseptic

properties

Foundation

Walls Width (360 mm)

and what materials we used Wood siding / light weight concrete / gypsum board

Roof Width (400 mm)

and what materials we used (tile and timber)

Plan from the inside Furniture and main colours (modern

contemporary and dark shade)

Fire protection gypsum board structural

wood members from the effects of heat. When exposed to fire, the gypsum absorbs large amounts of heat as its water content is released.

Fire retardant treatment Smoke alarms

Thank you! We wait for your critics and

comments not to make the same mistakes next time