Oven Take-off Conveyor Salt/Sugar Reclaimer Conveyor Oil Drain Conveyor Feed on Conveyor

Transfer Row Aligner Conveyor Transfer Side Row Aligner Scrap Intralox - 12" belt Z-type Scrap Conveyor-Intralox

Modular drive-Sew loop Take-Up Air Cylinder Take-Up Band Brush - Oven belt cleaning C-frame for Salt/Sugar depositor

Tandem Conveyor-Ultrasonic cutter Icing Conveyor/Applicator/Belt washer

Noser Retraction System Roller - ER Bearing

Nosebar -S.S. or nylon Rollers Transfer Knife 0ven to Take-off Conv.

ENR General Machining serves bakery/ food

and beverage industry in both processing and packaging. Our design engineering department can offer turn key systems as well as component systems, solving complex processing and packaging needs.

Our full service machine shop, offering medium to heavy machining, compliments our ability to be well diversified.

3725 W. 49th. St., Chicago, IL 60632 Phone: 773-523-2944, Fax: 773-523-4483

Toll free Phone: 866-523-2944 e-mail: enrmach@ameritech.net

Bakery Production Line Equipment

Custom Conveyors, design and manufacture:

Oven Take-off – belt/wire mesh conveyors Oven Feed-on conveyors Salt/sugar reclaimer conveyors Oil drain conveyors Transfer conveyors Scrap conveyors & Z-type Scrap conveyors Icing conveyors and applicators Belt washers Oven band brush cleaners Product/Row aligner Rollers – Drive, Teflon sleeved, stainless steel Modular conveyor, components

3725 W. 49th. St., Chicago, IL 60632 Phone: 773-523-2944, Fax: 773-523-4483

Toll free phone: 866-523-2944 e-mail: enrmach@ameritech.net

3

Tandem Conveyor - Ultrasonic cutting Icing Conveyor, Applicator, Belt Washer

Oven Take-off Conveyor - Oven - Feed-On Conveyor

Sugar/ Salt -Reclaimer Conveyor - Oil Drain Conveyor -

4

Incline Transfer conveyor - Row aligner one side

assembled Row aligner in working position

Transfer conveyor - Row guides

Reversible Transfer conveyor with attached roll breaker- 174" lg., belt width 24" - wire mesh;

Cutting apron conveyor - modification Z-type Scrap conveyor - metal detector controlled

5

Z-type Scrap conveyor - 12" flight; 147" lg Transfer from Thru- track formed bed Scrap conveyor to

Z-type Scrap conveyor

Scrap conveyor - Thru-track. Length - 84". Belt width -

11-1/2"; In feed &discharge height - 20" Transfer from Thru- track formed bed Scrap Conveyor

6" width belt to Z-type Scrap Conveyor

Scrap Conveyor- roller bed for sticky product - 131" lg. Belt width 12"; flight 1-1/2"x12" on 12"

Scrap conveyor- formed bed . Belt width 12" Modular drive-Van der Graaf Motor; belt tracker

6

Belt washer for Icing Conveyor Modular drive with Van-der Graaf motor; screw take-up

Air cylinder take-up Gage roll Conveyor

Band brush for oven belt cleaning Teflon & Stainless Steel Rollers

7

Oven discharge Oven take-off Oil spray Oil drain To Cooling tunnel

Rabbit-Ear conveyor - 20 ft. to 100 ft. ceiling mounted

Flat bed conveyor, modular drive - ceiling mounted

Gauge Roll & Cutting Apron modification