test report number: szhh01425805

Test Report Number: SZHH01425805

*ZHJ1425805* of 19

Intertek Testing Services Shenzhen Ltd. 深圳天祥质量技术服务有限公司

West Side of 1/F and 3,4,5/F of Bldg. 1, 1-5/F of Bldg. 3, Yuanzheng Science and Technology Industrial Park, No.4012, Wuhe Ave. North, Bantian Street, Longgang District, Shenzhen 深圳市龙岗区坂田街道五和大道北 4012 号元征科技工业园

1 号楼 3、4、5 层及 1 楼西侧半层和 3 号楼整栋 1-5 层

Tel:+86755 26020111 Fax:+86755 35377118\9 www.intertek.com.cn www.intertek.com

Applicant: LEISURE TIME PRODUCTS Date: Dec 23, 2019 LEISURE TIME PRODUCTS 3305 AIRPORT

DRIVE PITTSBURG, KS 66762

Attn: DANIEL WHYMAN/RUDY/TABATHA BAUER

Sample Description: One (1) set of submitted sample said to be : Item Name : 10x12 Arlington Gazebo. Item No. : 2001510. Sam’s Cat No. : 12. Brand Name : Backyard Discovery. Country of Destination : US. Country of Origin : China. Date Sample Received : Dec 16, 2019. Testing Period : Dec 16, 2019 ~ Dec 23,2019

Tests conducted:

As requested by the applicant, refer to attached page(s) for details. Conclusion:

Tested Sample Tested Item Result Submitted samples sets Performance Test

- As per the client’s requirement Pass

Remark:

1 Following document(s) should be submitted for verification in production stage. - C.O.C. of toxic in packaging.

Authorized by: For Intertek Testing Services Shenzhen Ltd.

Rachel L. Guo General Manager


Tests Conducted

*ZHJ1425805* of 19





Client Test Protocol for All Products - US dated Dec 10, 2019

Evaluation Citation Criteria Result

Scope Applies to all products Standards Not Applicable Regulations Not Applicable Physical and Mechanical Requirements Age Grading Client USA

Product Safety and Compliance Standard based on CPSC Age Determination Guidelines and

ASTM F963 Annex A1 Age

Grading Guidelines

All products shall be tested according to either the appropriate age grade or the labeled age grade if it is more stringent. In the event the sample is not age labeled, the test lab shall determine the appropriate age grade and test accordingly.

Label age grade:

Not specified

Appropriate age grade:

Adult

This is a general

purpose item.

Packaging and Labeling *Claim Verification Federal Trade

Commission (FTC) and

Various State Laws

Product shall meet all label claims, both factual and objective. Any claim not addressed by the Product Safety and Compliance Team should be managed by the Client Technical and Quality teams. Testing shall be performed to substantiate label claims. In lieu of testing, a passing test report may be submitted. See Document Acceptance list for document parameters. Client’s Comments: For BPA-free claims, the maximum allowed limit is 2 ppm.

P (See appendix)

*Material Claims (wood, metal, plastic, etc.)

Client USA Product Safety

and Compliance Standard

All material claims must be substantiated using an industry accepted method. In lieu of testing, a passing test report may be submitted. See Document Acceptance list for document parameters. For wood claims only, in lieu of testing, a passing test report or Letter of Guarantee may be submitted. All material claims must also meet any applicable Client Technical and Quality requirements.

P (See appendix)


Tests Conducted

*ZHJ1425805* of 19






Country of Origin Marking

19 USC 1304 Every article imported into the United States shall be marked in a way to indicate to the ultimate purchaser in the United States the English name of the country of origin of the article. The article shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or container) will permit.

P

Declaration of Identity, Responsibility, and Quantity for Packaged Products (Not Regulated by FPLA) EXCEPT Size, Placement and Readability of Labeling


and Compliance Standard based on Various State

Laws

Packaging and Labeling content must meet the requirements outlined below. Declaration of Identity – The identity of the product shall appear on the package label and shall not be misleading or deceptive. The identity shall be: • the name specified in, or required by, any federal or state regulation, or • the common or usual name, or • the generic name or other appropriate description, including a statement of function. NOTE: If a product is clearly recognizable, a declaration of identity is not required (i.e. open stock dinnerware). NOTE: Brand names/ logos may appear on product as part of the identity. Declaration of Responsibility - The name and location (street address, city, state and zip code) of the manufacturer, packer, or distributor shall appear on the package if that package is sold, kept, offered, or exposed for sale at a location other than the premises where it was packed. • The street address and zip code may be omitted if the company is located in a readily accessible, widely published, and publicly available resource including but not limited to a printed directory, electronic database or website. Declaration of Quantity - A declaration of net quantity shall be accurate and shall appear on the package unless the item is measured by count and contains six or fewer pieces that are clearly visible. • Quantity statements should include US customary units and SI metric units when applicable NOTE: Where there is a firmly established general usage and trade custom with respect to the terms used in expressing a declaration of quantity such declaration of quantity may be expressed in traditional terms, example 15 in steering wheel cover. NOTE: Dimensions are not required for irregularly shaped products unless dimensions are commonly used for the item to make a buying decision.

P


Tests Conducted

*ZHJ1425805* of 19






Declaration of Identity, Responsibility, and Quantity for Packaged Products (Not Regulated by FPLA) Size, Placement and Readability of Labeling ONLY


and Compliance Standard based on Various State

Laws

Packaging and Labeling size, placement and readability must meet the requirements outlined below related to the Declaration of Identity, Declaration of Responsibility and Declaration of Quantity. All information is required to appear on a consumer package and shall be prominently displayed in the English language. Prominently displayed shall be defined as follows: •Type size large enough to be read; •Good contrast in color between font and background; •Conspicuous and legible type without obscuring design or vignettes. Client’s Comments: Size = Stated font size requirements. Placement = Stated placement of information (i.e. "prominent" or "Principal Display Panel") Readability = Spelling and grammar, abbreviations (i.e. "in" versus "inches")

P

Instruction Language


and Compliance Standard

Use and care instructions should be clear and understandable, without errors or spelling mistakes, and provided in English.

P

*Toxics in Packaging

Toxics in Packaging Act

Intentional introduction of any amount of lead, mercury, cadmium or hexavalent chromium in any packaging is prohibited. Incidental presence of these metals is limited to 100 ppm total concentration of lead, mercury, cadmium and hexavalent chromium in any packaging. In lieu of testing, a passing test report may be submitted. See Document Acceptance list for document parameters. Client’s Comments: For additional information: www.toxicsinpackaging.org

See remark 1


Tests Conducted

*ZHJ1425805* of 19






Other Requirements (record as data only for small quantity Client.com exclusive products) UPC Codes Actual Use

Client Requirement

Using a commercial available bar code reader to read the UPC code printed on the package / artwork. The code readout shall match with the number underneath. Record the reading displayed on the reader.

C: 752113001510

R:

752113001510 Parts Inventory Visual Check Shall meet label claims. P

*Corrosion Resistance (Sam’s Club private brand products that require corrosion testing of metal components)

Client’s Requirement / ASTM B117 (Modified)

Indoor products shall withstand 1 % salt fog spray at 95 �F for 24 h with no signs of corrosion. Grade 10 rating referencing ASTM D610 or ASTM B537. Outdoor products shall withstand 5 % salt fog spray at 95 �F for 24 h without any signs of corrosion. Grade 9 rating or better referencing ASTM D610 or ASTM B537. Photos of BOTH pass / fail results before and after corrosion testing are to be included in the test report.

P .

Other test requirement according to test protocol NA

Sam’s Club Protocol SMC-HD134 for Gazebo / Pavilion (Version 7 dated Sep 24, 2019)

Test Items Citation Requirement / Limit Result

Labeling & Packaging Hardware Visual Check Packaging shall include all hardware required for

proper assembly, which shall be listed. P

Tool (if unassembled)

Visual Check Package shall list tools required for proper assembly. P

Assembly Instructions (if unassembled)

Visual Check Instructions shall be clear & concise and include diagrams or illustrations.

P

Physical Characteristic Overall Dimensions Standard

Measurement Report overall dimensions (length, width, height). P

(C: 12 ft 1 in x 11 ft 2-3/16 in x 10 ft 1-5/8 in /

3.7 m x 3.4 m x 3.1 m

R: 146 in W x 134 in D x 121”

H) Overall Weight Standard

Measurement Report weight. Record:685 lbs


Tests Conducted

*ZHJ1425805* of 19






Construction & Workmanship Defects Visual Check Components shall not be misaligned, missing,

malformed, and / or fractured. Shall not have any discernible surface degradation including crazing, shivering, denting, bubbles, blisters, cracks, stains / dirt, discoloration, chips, heavy lines, waves, shear marks, scratches, scuff marks, or indentations.

P

Metal Surfaces Visual Check All metal surfaces are plated, coated, or equivalent to inhibit corrosion.

P

Head and Neck Entrapment

ASTM F1148-12 Section 6.1 (Modified)

Shall be designed and constructed so that when assembled any accessible opening shall meet the requirements specified in this section to reduce the risk of accidental head or neck entrapment by either a head first or feet first entry into the opening. Openings between the ground and the bottom edge of the equipment are exempted from this requirement.

P

Performance Functionality Client’s

Requirement Shall function as intended as received. Report details of evaluation (features tested / methods used / materials tested etc.) if not already covered by other tests. Additional charge and samples may be required for special features.

P

*Ease of Assembly Actual Use Follow the instructions to assemble; comment on the method of the installation. Parts shall not easy to break during normal assembly.

P

Assembled Product Visual Check Products requiring assembly have to be inspected after proper assembly for any aesthetic deficiencies including but not limited to pieces that do not align, are not level or straight. All non-conformance shall result in clause failure with photo(s) attached in the report.

P


Tests Conducted

*ZHJ1425805* of 19






Stability As per Criteria - Set up the gazebo as per instructions; - Measure the area of the projected side S (ft2), refer to chart below using the claimed wind speed the product can withstand (50 mph if no claim) and load a pushing force F = S x L in the frame center and hold for 5 minutes; - The gazebo shall remain stable, no swaying or moving.

Wind Speed (mph) 40 45 50 55 60 65 Static Pressure (lb / ft2)

3.993

5.054

6.240

7.550

8.985

10.545

Wind Speed (mph) 70 75 80 85 90 95 Static Pressure (lb / ft2)

12.230

14.040

15.974

18.033

20.217

22.526

Wind Speed (mph)

100

105

110

115

120

125

Static Pressure (lb / ft2)

24.960

27.510

30.201

33.009

35.942

39.000

S: Area of the side (ft2) L: Static Pressure (lb / ft2) F = S x L (Force pulling onto the side of the gazebo)

P

Roof Snow Load As per Criteria Place a distributed load of the claimed snow loading (use 10 lb / ft2 if no claims) on the roof for 8 h. There shall be no damage to the roof top or permanent deformation of the frame. NOTE: does not apply to products that provide clear instructions of not leaving the structure erected during winter when snow is expected. If exempted from Roof Snow Load assessment, record the instructions on the report.

P


Tests Conducted

*ZHJ1425805* of 19






Cycle Testing of Moveable Components

Actual Use Components intended to be moveable shall withstand 100 cycles with no failure. All components must maintain a smooth and uniform movement throughout each cycle.

P

Effect of Extreme Temperatures

As per Criteria There shall be no evidence or discoloration or loss of serviceability after the product is exposed to 140 °F for 4 hours and 0 °F for 4 hours.

P

*Wood Moisture (solid wood)

Standard Measurement

Shall not exceed 12 % but no lower than 6 %. P Solid

wood:9.8% *Corrosion Resistance (accessible metal component)

ASTM B117 Shall withstand 24 h of 5 % salt fog spray without any signs of corrosion. Grade 9 rating or better referencing ASTM D610 or ASTM B537.

P

Key *: Additional Charge Items

Results Key - For Information Only P Pass NA Not Applicable R Recorded C Claimed

Appendix

Claim Verification

Claim Classification Result

- Footprint dimensions: 10 ft 9-1/8 in x 9 ft 9-3/16 in x 10 ft 1-5/8 in ( 3.3 m x 3.0 m x 3.1 m) - 1 gazebo = 5 boxes; - Box 1 contents: Assembly instructions, plastic accessories, metal accessories & premium lumber; - Box 2 contents: Plastic accessories, metal accessories & premium lumber; - Box 3 contents: Metal accessories & premium lumber; - Box 4 contents: Metal accessories & premium lumber; - Box 5 contents: Metal roof;

Actual test: Visual, Measurement & Normal use

As Claimed

- Cedar Letter of guarantee was provided As claimed


Tests Conducted

*ZHJ1425805* of 19





Photos for reference

Original sample

Labeling on the product


Tests Conducted

*ZHJ1425805* of 19






Tests Conducted

*ZHJ1425805* of 19





labeling on the packaging


Tests Conducted

*ZHJ1425805* of 19





Labeling on the plastic bag

Before Corrosion Resistance After Corrosion Resistance


Tests Conducted

*ZHJ1425805* of 19








Tests Conducted

*ZHJ1425805* of 19






**************************************************************************************************************************************End of report

The statements of conformity reported have considered the decision rule agreed, namely that Intertek have taken account of measurement uncertainty as calculated by Intertek, and applied according to ILAC-G8/09:2019 (APPENDIX B – Example 2) except designation from the customer, regulation or test specification. This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. This report shall not be reproduced unless with prior written approval from Intertek Testing Services Shenzhen Ltd.

test report number: szhh01425805

Documents