tennis court lighting
DESCRIPTION
Advanced Lighting Technologies Tennis Court Lighting Brochure. Low pole lighting solutions for Recreational and Residential, Club Competition and Commercial tennis court lighting. Featuring information on: • Lighting Designs for typical single court and multi court layouts. • The Aerodome® AVV Series • The Cut-off Flood CF Series • The Area Cut-off AC Series • Steel Poles • Deltaguard Colourfast Finishing • HID Lamps by Venture Lighting • Order informationTRANSCRIPT
Low Pole Lighting Solutions
Advanced LightingTechnologies
Tennis Court Lighting Low Pole Lighting Solutions
Advanced LightingTechnologies
Tennis Court Lighting
Advanced Lighting Technologies (ADLT) is a high quality manufacturer and supplier of light fittings and lamps specialising in: » Flood, Area, Sports and Street Lighting
» Industrial and Commercial Lighting
» Canopy and Parking Lighting
» Security and Amenity Lighting
» LED lighting from BetaLED®, by RUUD Lighting, a CREE company
» Industrial, Food Industry, and Infrastructure Lighting
ADLT and RUUD Luminaires are assembled and tested in our Melbourne production facility. ADLT is the distributor for VENTURE® metal halide lamps.
Advanced LightingTechnologies
Low Pole System AdvantagesLow pole tennis court lighting systems have many advantages over high pole alternatives. These include:
» Reduced glare
» Superior spill light control
» Substantially longer lamp life, meaning greatly reduced maintenance costs
» Ability to illuminate individual courts when the entire complex is not in use
» Lower visual impact on the surrounding neighbourhood
» Easier to access so no need for “long reach” cherry pickers to carry out lamp replacement and general maintenance
By reducing glare and spill light, playing times may be extended as there is less impact on the surrounding community.
Spill light restrictions are enforced by most local bodies and these aspects should be addressed at the commencement of the design process. Spill light is light shining beyond the sports facility that may annoy occupants of adjoining properties. RUUD Luminaires have sharp cut-off to overcome this problem.
Our qualified team is available to assist with your resource consent process.
High Performance
Optimum Uniformity
Precise Distribution
Design Excellence
Successful tennis court lighting begins with good design. The main factors to be considered in the design process are:
» Quantity of light
» Quality of light
The quantity of light is expressed as an average lux level and is usually determined by the level of tennis to be played. General guidelines recommend lower levels for recreational play, medium levels for club standard and high levels for international or professional grade.
Australian and New Zealand standards recommend the following average maintained lux levels for the various levels of play.
» Recreational and Residential – 250 lux
» Club Competition and Commercial – 350 lux
» International and National – 1000 lux
The quality of light is evaluated by the degree of light uniformity and lack of glare. Optimum uniformity is achieved by using light fittings that provide the correct light distribution and that are positioned appropriately around the perimeter of the court.
Glare is kept to a minimum by utilising light fittings with precise cut-off distribution.
For optimum design, a product has to offer more than reliability, performance and value. It must also become part of the environment, deliver minimal environmental impact and be energy efficient.
Our range of products can be tailored to meet your budget and application constraints.
With our qualified staff we are able to assist with your total lighting solution.
Cost effective single court lighting solutions for recreational or competition level.
Two ways to effectively light your twin court layout for club level tennis.
Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage
Area Cut-off AC1499 Recreational and Residential 4 6m 4 1000W MH
Aerodome® AVV406875 Club Competition and Commercial 4 7.6m 4 875W PSMH
Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage
Cut-off Flood CF3499 Club Competition and Commercial 4 7.6m 8 1000W MH
Aerodome® AVV406875 Club Competition and Commercial 6 7.6m 8 875W PSMH
Typical Layouts
Single Courts
Twin Courts
Area Cut-off AC
Cut-off Flood CF
Aerodome® AVV4
The following lighting layouts are of a typical nature. Please contact our customer services team for an optimised design to meet your specific lighting and location requirements.
Aerodome® AVV4
Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage
Aerodome® AVV406875 Club Competition and Commercial 6 7.6m 6 875W PSMH
Aerodome® AVV306875 Club Competition and Commercial 6 7.6m 8 875W PSMH
Description Level of Play No. of Poles Pole Height No. of Fittings Lamp Wattage
Aerodome® AVV406875 Club Competition and Commercial 6 7.6m 6 875W PSMH
Aerodome® AVV306875 Club Competition and Commercial 9 7.6m 12 875W PSMH
Triple Courts
Quad Courts
Aerodome® AVV4
Aerodome® AVV4
Aerodome® AVV3
Aerodome® AVV3
AC SERIES
CF SERIES
The Area Cut-off AC Series is an ideal cost effective solution for stand alone tennis courts.
This forward throw reflector has a main beam 60 degrees from vertical providing wide lateral distribution and excellent uniformities. The fitting is mounted horizontally (flat glass) for glare control and an internal backlight shield is available as an accessory to provide sharp cut-off behind the pole.
Area Cut-off
Cut-off FloodThe Cut-off Flood CF Series is an ideal cost effective solution for multi-court applications.
The CF Series is a forward throw light fitting with an optical system specifically designed to assure maximum main beam projection while minimising spill light. It is generally tilted to a maximum of 20 degrees above horizontal to reduce glare and obtain optimum performance.
The Aerodome® AVV Series is a stylish fitting suitable for single and multi-court applications. The vertical mounted lamp delivers a significantly longer life and higher output.
Aerodome ®
AVV SERIES
Sourcing your light fixture and poles from Advanced Lighting Technologies means your club or client need only deal with the one supplier for your tennis court lighting requirements.
Advanced Lighting Technologies recommends RUUD Lighting poles for their Area Cut-off and Aerodome® light fixtures. The identification of the right pole is a necessary step in the choice of RUUD Lighting products.
Advanced Lighting Technologies supply RUUD square section premium base plate poles complete with in-ground reinforcing cages and anchor bolts. Our square poles are available with a series of cross-arms and mounting brackets for complete mounting flexibility.
The DeltaGuard® process offers outstanding performance, endurability and colour retention.
Benefits For Premium Poles Exclusive Colourfast DeltaGuard® Finish
DeltaGuard® is our exclusive on-site total finishing system that ensures pole and fixture colour are an exact match while providing unmatched protection against the elements. The DeltaGuard® process offers outstanding performance endurability and colour retention in addition to:
» Ultraviolet Light Resistance
» Abrasion Resistance
» Superior Adhesion
» Corrosion Resistance
» Chemical Resistance
High-Quality Materials
Our poles are manufactured using the highest quality of steel so you never have to worry about the integrity of your project.
Steel Poles
Premium square steel poles offer the ultimate in strength and reliability. These non-tapered poles are available in 6 metre lengths for private residential use, or 7.6 metre for club level competition. RUUD poles feature our Crown-Weld pole base combined with steel pole base cover and pole cap, with matching DeltaGuard® finish to match the fixture.
Our reinforced premium square steel poles fill the need for a strength in tough wind conditions. Consult your Advanced Lighting Technologies representative for advice on pole requirements in your particular location.
Premium steel poles include a Crown-Weld® pole base that is much stronger than traditional designs. Crown-Weld® has four formed triangle sections and increased weld surface area that provides a dramatic improvement in pole fatigue resistance and yield strength and features a 50% higher EPA* value.
Premium Pole Features » Crown-Weld® pole base featuring 50% higher EPA value
» Colourfast DeltaGuard® finish with 7-year warranty
» EXACT pole to fixture finish colour match
» Steel pole base cover and pole cap with matching Colourfast DeltaGuard® finish
» Poles ship with fixtures
» Masonite bolt template
» Comes complete with hand hole cover, pole base cover and anchor bolt cage
* EPA (Effective Projected Area) is a rating assigned to pole-mounted lighting fixtures based on the fixture or pole’s surface area and shape.
The EPA is used to calculate wind loading to determine the proper pole size needed to support a fixture in outdoor applications. EPA maps indicate approximate maximum wind zones. Consult your Advanced Lighting Technologies representative for further advice.
COLOURFAST DELTAGUARD®
Our Exclusive Finishing System
Quality products deserve a quality finish with the only 7-year warranty in the industry. Colourfast DeltaGuard® guaranties a finish that will be free from material cracking, peeling, excessive fading or corrosion defects under normal use and service for seven years.
Colourfast DeltaGuard® Topcoat
The baked-on, ultra-durable powder top coat is key to a durable and colourfast finish.
The DeltaGuard® process offers unmatched performance in durability and colour retention and delivers:
» Ultraviolet light resistance
» Corrosion resistance
» Hard surfacing
» Chemical resistance
» Superior adhesion
» Excellent colour retention
Available Finishes
BRONZE BLACK* WHITE SILVER
* Standard finish
nb* non-standard finishes have extended production
and shipment time of 16 weeks or more.
Consult ADLT for availability.
DeltaGuard® Exposure Comparison
The same 3mm thickness of powder was applied to each of these two pole section samples. Each was scored and exposed to a salt-fog test for 2,500 hours.
RUUD Pole with DeltaGuard® finish Standard Pole
Our Total Finishing System Includes: » Meticulous cleaning that removes all surface contaminants
» Pretreatment that chemically etches the metal surface for superior paint adhesion
» Electro-deposited epoxy primer that provides unmatched corrosion resistance
» Baked-on, ultra-durable topcoat that offers superior protection against UV radiation
» Computerized control and quality assurance system
» ISO 9001-2000 Quality Standard registration
» Use of environmentally safe materials throughout the finishing process
The RUUD range of tennis court lighting distributed by Advanced Lighting Technologies use only quality Venture lamps.
As we are ever more reminded of the need to conserve energy worldwide to protect our planet for future generations, Venture Lighting are striving to manufacture more energy efficient lighting systems.
Venture Lighting is leading the way in developing lighting energy efficient products to reduce overall energy usage costs throughout the world but without compromising on lighting quality. Our metal halide lighting systems are widely regarded as the most advanced available offering more light than conventional systems, excellent colour uniformity, longer life and significant energy savings. Making the most of Venture’s highly efficient lighting technology can result in significant benefits in terms of restoring our overall environment to a greener and cleaner world for us to enjoy.
RUUD® HID Lighting FixturesPowered by Venture.
Venture Lamps & Control Gear
Fixture Product Code Product Description Optical System Lamp Manufacturer Lamp Code
AC1499 - * # AC Series, Area Cut-off, Close Pole Mount, 1000W MH Area Cut-off Venture 15332
CF3499 - * # CF Series, Cut-off Flood, Adjustable Fitter, 1000W MH Cut-off Venture 72051
AVV406875 - * # Aerodome®, Vertical Forward Throw, Close Pole Mount, 875W MH PS Type IV - Area Cut-off Venture 22619
AVV306875 - * # Aerodome®, Vertical Parking Roadway, Close Pole Mount, 875W MH PS Type III - Parking Roadway Venture 22619
Pole Product Code Product Description
PS4S20CT - # PS Series, 6.0m, 100 x 100 Square, 3mm Wall, Base Plate Pole
PS4S25CT - # PS Series, 7.6m, 100 x 100 Square, 3mm Wall, Base Plate Pole
PS4S25ST - # PS Series, 7.6m, 100 x 100 Square, 5mm Wall, Base Plate Pole
Suffix * #
50Hz, 230V 53
50Hz, 240V 54
Colour – Black BK
Colour – Silver SV
Colour – Platinum Bronze PB
Colour – White WH
Ordering Information
T = Consult ADLT for Tenon and Mount options
Advanced LightingTechnologies
Advanced Lighting Technologies Asia Pte Ltd
Block 4008, Ang Mo Kio Avenue 10
#04-06, Techplace I
SINGAPORE 569625
T : +65 6844 2338
F: +65 6844 2339
www.adlt.com.sg
www.venturelighting.com.sg
Advanced Lighting Technologies Australia Inc
110 Lewis Road
Wantirna South, Victoria
AUSTRALIA 3152
T : +61 03 9800 5600
F: +61 03 9800 5533
www.adlt.com.au
www.venturelighting.com.au
Advanced Lighting Technologies New Zealand Ltd
Unit 8, 25 Airborne Road
Albany, Auckland
NEW ZEALAND 0632
T : +64 09 415 6332
F: +64 09 415 6255
www.adlt.co.nz
www.venturelighting.co.nz
Advanced Lighting Technologies Asia Pte Ltd
Block 4008, Ang Mo Kio Avenue 10
#04-06, Techplace I
SINGAPORE 569625
T : +65 6844 2338
F: +65 6844 2339
www.adlt.com.sg
www.venturelighting.com.sg
Advanced Lighting Technologies Australia Inc
110 Lewis Road
Wantirna South, Victoria
AUSTRALIA 3152
T : +61 03 9800 5600
F: +61 03 9800 5533
www.adlt.com.au
www.venturelighting.com.au
Advanced Lighting Technologies New Zealand Ltd
Unit 8, 25 Airborne Road
Albany, Auckland
NEW ZEALAND 0632
T : +64 09 415 6332
F: +64 09 415 6255
www.adlt.co.nz
www.venturelighting.co.nz