teclab - .: modulabo / mobiliario y equipamiento para ... ® the new generation of modularised and...

teclab®

Labo ra to ry Fu rn i t u reLabo ra to ry Fu rn i t u re

teclab®

2modulabomodulabo

TECLAB® is the new generation of modularised laboratory furnitureTECLAB® is the new generation of modularised laboratory furniture

■■ UNE-EN-ISO 9001:2000.

Our Quality Management System has obtained an essential qualification, Certification according to the standard DIN EN ISO 9001:2000 byIAC, which constitutes a guarantee of continuity in our Quality Policy with the aim of achieving the satisfaction of our clients.

■■ R, D+I.

Dedicating between 6 and 8% of our annual turnover to R, D&I, our technical department designs and develops the models in CAD and 3D,adapting them to new laboratory technologies. However our commitment to being at the forefront of world technology is not new: we havebeen registering and patenting laboratory tables and cabinets since 1993, which has allowed us to accumulate vital and highly specializedprofessional know-how.

■■ Guarantee.

All our laboratory furniture facilities are guaranteed against any defect in manufacturing. For our clients' satisfaction and assurance, ourcompany has obtained the DIN EN ISO 9001:2000 Quality Management Certificate by IAC.

■■ Respect for the environment.

Complying with the EN-14001 standard and as a wood-based industry, our maximum concern is to care for and respect the environment. Woodis a noble non-polluting material, and it has been declared by the Association of North American Contractors as the building supply of the twenty-first century for being the only raw material that reproduces itself and whose preparation and fabrication process is non-polluting. We haveinvested in new technologies to avoid environmental impact in its preparation, treatment and recycling.

■■ Expansion Projects.

In the last decade we have invested in a new, modern factory, with a surface area of 2200 m2 between the factory and warehouse, followinga production policy directed at product storage and always having a substantial stock ready for immediate dispatch.

■■ Efficient management of the foremost software and hardware tools.

A knowledge of all the tools available, whether software (Autocad, 3DStudio) or hardware, and development of the most up-to-date designprograms, has endowed us with the most advanced and creative technology, able to meet any requirement our clients may have.

■■ Highly qualified workforce.

All our staff, as well as our collaborators, are highly qualified, and hold official qualifications in accordance with the task they carry out, as wellas demonstrable experience in the commercial, engineering, production or installation sectors. Our track record as manufacturers and installersof laboratory furniture is endorsed by more than 5000 facilities.

■■ One person is the interface and responsible to the client.

Our Sales Managers will be responsible for receiving, overseeing and delivering each project, thereby establishing a duality (Client-Modulabo)with a direct line of communication, saving time for the client.

■■ Guarantee of continuity, through upgrades and innovations in the Projects carried out.

Our commitment doesn't end with delivery of the project, and each job is followed up (at the client’s request or on Modulabo’s own initiative)to check product effectiveness and its possible revision and improvement, turning each project into an ongoing innovation.

■■ Alter-Sales Technical-Commercial Assistance.

Our engineering/sales department takes charge of surveying client satisfaction, offering our service at any time in the event of whatevercontingency occurring, without stinting in the time dedicated to after-sales service.

■■ Our Range Includes.

Work Benches with various surfaces, furniture of all types, gas cabinets and miscellaneous fittings.

WHAT CAN Modulabo PROVIDE?

3 teclab®teclab®

Work BenchesWork Benches

Installation: Autonomous University of Madrid - Faculty of Science. - TROX Integral Extraction System -

4modulabomodulabo

Work BenchesWork Benches The new generation of modularised and evolutionary laboratory furnitureThe new generation of modularised and evolutionary laboratory furniture

■■ Complying with the EN 13150 standard.

■■ Estructure formed by legs in C-shaped design ®, built in cold-rolled steel profiles of 80x40x2 mm which provide enhanced strength andopenness. The structure is self-supporting and very rigid, allowing independence in the placement of modules under the bench top.

■■ Levelling system capable of supporting heavy weights and overcome floor irregularities of up to 15 mm.

■■ The legs are manufactured in two heights: 855 mm for benches 900 mm high, and 692 mm for benches 750 mm high. The bottom frontpart of the legs is protected by means of a plastic ferrule. This piece avoids scraping and is easily interchangeable.

All the metallic structures that form the table will be galvanized electrolytically and coated in epoxy resin paint.

■ The chasis is formed basically by a frame, built with rectangular tube of cross-section 40x20x2 mm. The upper crosspiece of the chassisframe allows us in turn to support the bench work tops, while the lower one holds the sliding modules.

■■ The bracing is built with rectangular tube of cross-section 40x20x2 mm and is the member that allows the connection of the legs throughthe front part. The bracing also performs the function of supporting and anchoring the bench tops, with screws, and in turn serves to guidethe sliding modules.

■■ Engineering columns are pillars employed as structural members and serve for different uses. They are made of extruded aluminium of40x40 mm in single or double section. The aluminium of which they are made is best quality and assures excellent mechanical properties andhigh resistance to chemical attack while providing an attractive finish. Coated in normally light grey epoxy resin, colour RAL 7035, whichprovides high chemical resistance.

■ Colour card:

RAL 3011 - Brown redRAL 5010 - Gentian blueRAL 5015 - Sky blueRAL 5021 - Water blueRAL 7012 - Basalt greyRAL 7035 - Light greyRAL 9006 - Metallic grey

5 teclab®teclab®

The new generation of modularised and evolutionary laboratory furnitureThe new generation of modularised and evolutionary laboratory furniture

■ Complying with the EN 13150 standard.

■ Estructure formed by legs in C-shaped design ®, built in cold-rolled steel profiles of 80x40x2 mm which provide enhanced strength andopenness. The structure is self-supporting and very rigid, allowing independence in the placement of modules under the bench top.

■ Levelling system capable of supporting heavy weights and overcome floor irregularities of up to 15 mm.

■ The legs are manufactured in two heights: 855 mm for benches 900 mm high, and 692 mm for benches 750 mm high. The bottom frontpart of the legs is protected by means of a plastic ferrule. This piece avoids scraping and is easily interchangeable.

All the metallic structures that form the table will be galvanized electrolytically and coated in epoxy resin paint.

■ The chasis is formed basically by a frame, built with rectangular tube of cross-section 40x20x2 mm. The upper crosspiece of the chassisframe allows us in turn to support the bench work tops, while the lower one holds the sliding modules.

■ The bracing is built with rectangular tube of cross-section 40x20x2 mm and is the member that allows the connection of the legs throughthe front part. The bracing also performs the function of supporting and anchoring the bench tops, with screws, and in turn serves to guidethe sliding modules.

■ Engineering columns are pillars employed as structural members and serve for different uses. They are made of extruded aluminium of40x40 mm in single or double section. The aluminium of which they are made is best quality and assures excellent mechanical properties andhigh resistance to chemical attack while providing an attractive finish. Coated in normally light grey epoxy resin, colour RAL 7035, whichprovides high chemical resistance.

2. Gas and ElectricityServices Column.

3. Lighting and electricalsupply below shelf.

4. Composition of central benchplus a washing module.

1

2

3

4

1. Teclab furniture installations.Natural history studies.

Installation: Sika S.A.

6modulabomodulabo


■■ Consisting of two confronting wall-mounted benches with aservices gallery of 300 mm in the centre.

■■ Versions with shelves at one or more heights.

■■ Multiple combinations:

- With sink-unit fitting at the bench head.

- With back-to-back wall-mounted benches, etc.

Considering that a stand-alone bench can be composed of twowall-mounted units, the same material is used as that utilized forthe production of the bench top, or 40x40 mm aluminium tubes.

Stand-alone Benches

Standard types of Stand-Alone Benches

DCL DCF DCR1 DCR2

Installation: Synlab Iberia S.A.

Installation: Alcalá Natura

7 teclab®teclab®


Installation: CSIC, Salamanca

Installation: Complutense University of Madrid – Faculty of Chemistry

8modulabomodulabo


■■ The services gallery:

- This is the space that is left between the leg and the column. Itis 150 mm in the wall-mounted benches and 300 mm in thestand-alone benches. This length is increased by 40/80 mmdepending on whether one or two columns are mounted in thebench shelves. The main function of these galleries is to allow thepassage of the different fluids, electrical conduits, signal lines,etc.

■■ The shelf trays in the benches can be at one or more heights,which are adjustable in all cases. There are two types of shelf:

- Shelves for storing chemicals, which have a depth of 150 mmas per the EN 13150 standard.

- Shelves for other uses. Depth 300 mm.

■■ Rear Covers:

- They are easily fitted along the entire services gallery and aremounted and removed without using any type of tool.

- To simplify extraction, each panel has two slot-type pullingpoints, located on its ends.

■■ End or side covers:

- They are built with compact resin 10 mm thick and they areused to finish the sides of the stand-alone and wall-mountedbenches. The sides are held to the metallic structure with screws,the latter being finished with decorative caps on their heads.

■■ The high-low bench spacers are used to cover the gaps leftbetween the union of a low bench cover with one which is high.

These spacers are manufactured to be adapted to the wall-mounted or stand-alone benches. The material employed for theproduction of these items is the same material as that employedin the bench top.

Standard types of Wall-Mounted Benches

DML DMF DMR1 DMR2

Installation: Synlab Iberia S.A.

Installation: Castilla la Mancha University

Wall-Mounted Benches

9 teclab®teclab®


Installation: Castilla la Mancha University

Installation: Rey Juan Carlos University

10modulabomodulabo

Wide selection of materials with different application-specific characteristics Wide selection of materials with different application-specific characteristics

Our engineering department can develop the most appropriatesolution for any type of laboratory or facility.

■ Chemistry benches.

■ Physics benches.

■ Chromatography benches.

■ Sampling room benches. (1)

■ Electronics laboratory benches. (4)

■ Bus-bar benches. (3)

■ Column benches. (2)

■ Reference furniture. (5)

Special Benches

2 3

4 5Installation: Autonomous University of Madrid Installation: Health Centre Miguel de Cervantes

Installation: Rey Juan Carlos University Installation: Rey Juan Carlos University

Special Work Benches Special Work Benches

1Installation: Autonomous University of Madrid

11 teclab®teclab®

Wide selection of materials with different application-specific characteristics Wide selection of materials with different application-specific characteristics Work TopsWork Tops

■■ Post-formed laminate Tops

The support is a panel of water-repellent particles 30 mm thick.

The cladding of this material is laminated, highly resistant tochemicals and 0.8 mm thick.

- Post-formedfront with singleor double curve.

- Various colours.

■■ Compact Resin Tops

Solid slab based on thermostable synthetic resins, homogeneously reinforcedwith cellulose fibre, perfectly polymerised throughout its thickness. This materialis unaffected by moisture, resistant to absorption, acids, bases and solvents.

Two different qualities are offered in this material type: acid-resistant and finishedin acrylic polyurethane.

- Its thickness can be18 mm in normalcompacted resin or 20mm in compacted resinwith high chemicalresistance.

- Chamfered front orwith peripheral edging.

■■ Terra cotta tile Tops

Terra cotta tiles of 20 and 32 mm thickness with peripheral edging inglazed tiles enamelled at 1200° C and with Mohs-8 hardness, with atolerance of 1% in flatness over the length of the top (DIN 180155) andlength and width dimensional tolerance of ± 2 mm per tile.

- Enamelled flatfront.

- Front withperipheral edging ofthe same piece.

- Adjoining edgingin ABS in the 20mm tops.

- Various colours,normally white.

■■ Stainless steel Tops

Formed from a sheet of AISI 304 stainless steel of 1 mm in thickness andmounted on a water-repellent panel of 30 mm.

- The rear part of the top can have a continuous fold as decorative coping,of 60 mm in height.

- Smooth front over-sized to 40 mm.

- Front with peripheraledging of the samematerial.

Work Tops Characteristics

■■ Tempered glass Tops

Cover of tempered glass 6 mm thick, light blue in colour, on apanel of water-repellent particles of 25 mm. Joints of acid-resistant white-coloured mastic.

- Flat front with polypropylene profile of 3 mm in thickness.

- Front withperipheral edgingof epoxy resin.

■■ Granite Tops

Natural stone of high mechanical strength and chemicalresistance (inorganic products) in a veined white colour,polished finish and rounded edges. Mounted on water-repellent conglomerate board of 16 mm.

- 20 mm thickwith frontthickened to 40mm.

- Flat front.

12modulabomodulabo

Under-Top Modules

FurnitureFurniture

■■ Built in:

- Medium-density melamine board of 19 mm, with rims in rigid PVCof 2 mm thickness.

- Cladding of 1 mm thickness and epoxy-painted.

■■ Displacement System:

- Full run under bench top.

- Removable with synthetic resin wheels of 80 mm in diameter withdual support design. Front wheels with brake.

■■ Drawers, interior built in folded steel sheet with coating of epoxypaint. They support a weight of 30 kg with 100,000 openingoperations.

- In melamine board of 19 mm thickness and edges covered withPVC of 2 mm.

- Metallic side frames for total extraction with nylon wheels, self-locking.

- Bottom in melamine board of 16 mm in thickness.

■■ Doors, built in melamine board in a manner similar to thatindicated above.

- Hinges opening to 270° with recovery.

- Impact damper.

■■ Handle:

- Of extruded aluminium coated with epoxy or high-strengthpolypropylene paint, incorporated on the front of drawers and doorsextending over the full length.

■■ Shelves:

- Manufactured in medium-density melamine wood, adjustable inheight.

■■ Doors:

- Built in melamine board in a manner similar to that indicated above.

Extensive range of modular solutions to cover any requirement in any space Extensive range of modular solutions to cover any requirement in any space

Under Top Modules, hanging and sliding Under Top Modules, movable on wheels

D4C DCP DP D2P

Installation: Autonomous University of Madrid – Food TechnologyInstallation: Rey Juan Carlos University

D4C DCP DP

Widths: 450-600-900-1.200 mm. | Height: 650 mm. | Depth: 470 mm.

13 teclab®teclab®

Extensive range of modular solutions to cover any requirement in any space Extensive range of modular solutions to cover any requirement in any space

■■ Formed by:

- Two independent bodies, both of metallic structure, the outsideis lined with melamine board of 16 mm and the inside containsthe anti-vibration mass and dampers.

■■Working surface:

- Made in epoxy resin board with base for scales in polishedgranite.

- Dimensions:

Width: 900-1.200 mm.

Depth: 750 mm.

Height: 750-900 mm.

Benches for Scales

■■ Estructure of similar construction to the work benches andbody built in high-density melamine board 19 mm deep, withedges in rigid PVC of 2 mm in thickness.

Bottom in water-repellent resin.

■■ Single or double module:

- To couple to wall-mounted benches with independent structure,one or two hinged doors.

- Dimensions: 900x750 - 1200x750 mm.

■■ Frontal module:

- To couple to stand-alone benches with independent structureand double hinged door.

- Dimensions: 1500x600 mm.

■ Hinged doors opening to 270°.

■ Polypropylene, ceramic tile or stainless steel sink units.

■ Siphon in polypropylene.

■Water mixer tap.

■ Concealed wastebasket, side-mounted. Also in wall-mountedbenches.

Washing Modules

14modulabomodulabo

FurnitureFurniture Extensive range of modular solutions to cover any requirement in any spaceExtensive range of modular solutions to cover any requirement in any space

Hanging cupboards

■■ Fixed on wall or adjustable in height on engineering columns. Built in high-density melamine board of 19 mm, with edges in rigid PVC of2 mm in thickness.

Models

DE9 / 12 Shelving

DEL9 / 12 With glass doors

DP9 / 12 With glass doors

Hanging Cupboard Modules

DE12 DEL12 DP12

Dimensions

Width: 900 - 1.200 mm.

Depth: 350 mm.

Height: 700 mm.

■■ Built in:

- Melamine board of 19 mm, with edges in rigid PVC of 3 mm inthickness.

■■ Shelving adjustable in height.

■■ Doors blind hinged or sliding glass.

- Dimensions: 900x420x2.000 mm.

High Cupboards

■■ Cupboards, ventilated with or without filter.

■■ Silent turbine, molecular filtration, alarm, ...

- Dimensions:

Width: 900 mm.

Depth: 420 mm.

Height: 2.000 mm.

Safety Storage

DEE DEP DEPC DEC D2P

15 teclab®teclab®

Extensive range of modular solutions to cover any requirement in any spaceExtensive range of modular solutions to cover any requirement in any space

Gas Cabinets

■■ Interior Structure built in steel pipe with coating of epoxy paint specially resistant to acids,bases and alkalis.

■■Working surfaces: (according to applications)

- Continuous acid-resisting tiling of 30 mm in thickness, with peripheral rim to protect against spillsof acids and bases.

- Stainless steel.

- Polypropylene.

- Compacted resin.

- PVDF.

■■ Low piece constituted by two cupboards with interior panel, easily removable for possibleinspections.

- Optionally special piece for acids and bases with possibility of gas extraction.

Installation: Castilla la Mancha University - ICAM Toledo

Gas Cabinets maxximaGas Cabinets maxxima

16modulabomodulabo

Design and production specially developed for your safety when handling critical elementsGas Cabinets maxxima Design and production specially developed for your safety when handling critical elementsGas Cabinets maxxima

■■ Front windowl sliding vertically, mounted on aluminium frame and sliding in guide rails.

- Safety glass of 6 mm, slides transversely to allow lateral opening of the area for protection of the operator.

- System of counterweights and pulleys with rollers for maximum opening of the window or in two stages, the latter being adjustable in height.

- System for protection against the window falling in the event of the cable breaking.

- Base of the frame, formed by an aerodynamic rail in polypropylene that allows air to enter at the bottom while protecting against splashingat the same time.

- Obstacle detector in the closing area.

■■ Uniform distribution of air along the whole cabinet with free evacuation of turbulence, with vertical - lateral inlets, at top and bottom.

■■ Interior baffle of 6 mm in thickness formed by two horizontal panels for suction of heavy gases.

■■ Extractor motor with IP55 protection.

- Power appropriate for the cabinet type and characteristics of the building.

- Possibility of fitting in the cabinet or in the roof.

Installation: Castilla la Mancha University - ICAM Toledo

17 teclab®teclab®

Design and production specially developed for your safety when handling critical elementsDesign and production specially developed for your safety when handling critical elements

Gas Cabinets

■■ Accesories:

- Exhaust diffuser in PPs.

- Base in compacted resin with anti-vibration mechanisms.

- Structure for adjustable base in galvanized steel.

- Protective casing in PE.

■■Water service:

- Formed by tap with remote control and tiled basin with drainageand siphon, piping for supply of cold water.

■■ Gas service:

- Formed by tap with remote control, copper pipe for gas supply.

■■ Lighting service:

- Fluorescent tube of 40 W with reflective body in steel plateprotected with acrylic glass of prismatic structure, serving in turnas a safety ceiling in the event of explosion inside the cabinet.Secured against falling.

■■ Electrical service and controls:

- Located in the left column of the cabinet, incorporating:

• 4 electric sockets 230V., 16A.

• 1 switch for fluorecent tube 230V., 16A.

• 1 magneto-thermal breaker.

• 1 motor guard for extractor.

• 1 controller of the air extraction flow.

■■ Air flow controller:

- Electronic system for control of the extractor operation incompliance with the DIN 12924 standard.

- Alarms, both acoustic and optical.

- Accumulator for operation with power cut during 24 hours, forsystem failure warning.

- Ventilation of bottom cupboard.

- Temperature control with alarms.

Installation: Synlab - Alcobendas

18modulabomodulabo

Optionally

- Regulation of air flow to constant speed.

- Power-operated window closing actuated on detectingpresence.

- Scrubbing of gases by irrigation.

- Automatic extinguishing of fires.

- Safety panel with 2 openings for interior manipulation.

- Lower safety cupboard for acids and bases.

Special Cabinets

- Cabinets for radio isotopes.

- Cabinets with water irrigation system for scrubbing gases(perchloric acid).

- Cabinets for hydrofluoric acid.

- Cabinets for concentrated acids.

Widths: 1.200 - 1.500 - 1.800 mm.Heights: 2.100 - 2.400 - 2.740 mm.

Design and production specially developed for your safety when handling critical elements Gas Cabinets maxxima Design and production specially developed for your safety when handling critical elementsGas Cabinets maxxima

19 teclab®teclab®

Design and production specially developed for your safety when handling critical elements Design and production specially developed for your safety when handling critical elements FitmentsFitments

Sinks

■■ For sink units of wall-mounted and stand-alone benches:

- Polypropylene in welded sheet on injected basin, with bottomdrainage and overflow.

- Terra cotta in a single “monobloc” slab of 460x460 mm for wall-mounted benches and of 1500 x 600 mm for stand-alonebenches.

- Steel, built into bench top or monobloc.

Built-in sinks and basins

■■ For wall-mounted and stand-alone benches:

- Mounted at bench level, flush with the top or under the benchtop.

- Monobloc in injected polypropylene.

- Terra cotta: monobloc basins.

Basins

■■ Latest quality in anticorrosive plastic cladding, with metallicor ceramic seals in models for water and gas, with safetyappliance for gas.

- Wall taps: single, with double outlet, elbowed at 15, 90 and 180°

- Vertical columns with one, two or three outlets

- Operated by crank, pedal, etc.

Tap Fixtures

Sinks for washing units

20modulabomodulabo

A broad selection of special fitments and complementary fittings for any installationFitments A broad selection of special fitments and complementary fittings for any installationFitments

■■ Electrical lines and mechanisms:

- Are incorporated in the benches by means of conduits withremovable covers for inspection, which allow separation ofdifferent cable types: electricity, data, telephone, etc.

- Electric turrets with one or two sides, with two or four plug bases,watertight cover and protection in the connecting holes (IP55).

- Plug bases in different colours according to type of current.

- Protection by differential magnetothermal circuit breaker.

- Optional pilot lamps.

Electricity

Emergency Showers and Eyewashes

■■ Emergency Showers:

- Standing, wall-mounted, ceiling or door.

- Tubular steel structure, brass connections, base and pedal inaluminium, epoxy-clad.

■■ Technical details:

- Connection depends on model G1, G3/4, G1/2 for connecting tomains supply.

- Outlet: G1.

- Minimum water pressure: 2 Bar.

- Water flow: 30 l/m. for showers according to standards.

12 l/m. for eyewashes according to standards.

- Weight and dimensions according to standards.

■■ Eyewashes:

- Bench-top or wall-mounted. Straight or at 45°

- Single or double.

- Structure in sturdy plastic material, body of epoxy-coated brass.Lever operated.

- Connection: G3/8 for joining to water mains.

- Minimum water pressure: 2 Bar.

- Water flow: 6 l/m. for showers according to standards.

12 l/m. for eyewashes according to standards.

- All the showers are supplied with internal emergency signal.

- Flexible connection in stainless steel, 1.5 m long and support forsecuring.

21 teclab®teclab®

A broad selection of special fitments and complementary fittings for any installationA broad selection of special fitments and complementary fittings for any installation

Extractors and Complements

■■ Extractors for gas cabinets or exterior.

■■ Suction hoods with filter, with extendible arm and heightadjustment.

■■ Safety recipients for harmful, toxic and poisonous chemicals.

■■ Fireproof ashtrays and wastebaskets.

■■ Fire-protection blankets.

■■ Active carbon filters.

■■ Estructure:

- Metallic with five legs, painted in white epoxy, chrome-platedhoop. Seat and back in wood, upholstered or black, yellow orbrown injected polypropylene.

- Height adjustment by gas or screw:

530 a 700 mm.

450 a 550 mm.

Stools

5GRM 5GRT 5GRTr

5HR (M-T) 5H (M-T-P)

VSB Extractor in Polypropylene.

22modulabomodulabo

A broad selection of special fitments and complementary fittings for any installationSafety Closets A broad selection of special fitments and complementary fittings for any installationSafety Closets

Safety Closets

■■ Closets for Chemicals:

- Safety closets, with suction and filter for the storage ofchemicals, acids and bases according to the standard EN61010/IEC66-5.

- Built entirely in pickled and electro-galvanized steel with acid-resistant epoxy paint applied electrostatically through a thermaltunnel at 200°

- Three-point safety lock with new bolt according to EC safetystandard, of the same type as that used in fireproof doors.

- Equipped with active carbon filter and suction.

- New base with removable cover.

■■ Closets for Inflammable products:

- Safety closets for the storage of liquid and solid inflammableproducts according to standard DIN 12925-1.

- Built entirely in pickled and electro-galvanized steel with acid-resistant epoxy paint applied electrostatically through a thermaltunnel at 200°

- New double faced construction method (internal and external)totally insulated by means of expandable material.

- Interior insulation fabricated with highly fire-resistant material.

- New base with removable cover.

- 2 fire-inhibiting valves for the new air circuit that closesautomatically on reaching 72°

• The first valve is situated in the top front part of the closet

• The second valve in the rear bottom right part of the closet.

AB 900/50 AB 600AA 120 NEW BC 700 GS BC 1000 GS

Closets for Chemicals

Closets for Inflammable Products

23 teclab®teclab®

A broad selection of special fitments and complementary fittings for any installationA broad selection of special fitments and complementary fittings for any installation

gas

cold water

hot w

ater

compressed air

misc

ellane

ous

draina

ge

Installations

Services Installation in Work Bench.

2D Layout with Distribution of Teclab Laboratory Furniture.

■ The benches are equipped with their own network of pre-installed conduits in the services gallery, easily accessible fromthe exterior.

■ The supply pipes are generally made of copper and have theappropriate section for the type and flow of the fluid transported.

■ The specifications of certain fluids like treated water, acetylene,etc., imply the use of other materials (PVC, stainless steel, PVDF,etc.).

■ Drainage is carried out with PVC or polypropylene tubes of theappropriate section, which is usually 40 mm in diameter.

■ The electric lines are incorporated through channelling withremovable cover that allows separation of the different types ofcables for electricity, computer data, telephony, etc.

Projects

InstallationsInstallations

OFFICES:

Doctor Velázquez, nº 328224 - Pozuelo de Alarcón

(Madrid)Telephone: (+34) 91 611 00 01 / Fax: (+34) 91 619 06 13

Web: [email protected]

FACTORY:

Polígono Industrial Monte BoyalAvda. de Las Retamas, nº 15645950 - Casarrubios del Monte

(Toledo)Telephone: (+34) 91 818 81 16

Fax: (+34) 91 818 83 09

DISTRIBUTOR:

Labo ra to ry Fu rn i t u reLabo ra to ry Fu rn i t u re

teclab - .: modulabo / mobiliario y equipamiento para ... ® the new generation of modularised and...

Documents