Notifikovana osoba č. 1301

TECHNICKY A SKUŠOBNY USTAV STAVEBNY, n. o. BUILDING TESTING AND RESEARCH INSTITUTE Studena 3, 821 04 Bratislava, Slovenska republika

Certificate of conformity of the factory production control

1301 - CPR - 0694

ln compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product

Chimney elements- single layer, DOK UNO & DOK OMEGA Chimney elements- double layer, DOK DUO

are used to convey the products of combustion from appliances to the outside atmosphere.

Produced by manufacturer

DURO DAKOVIC KOMPENZA TORI d.o.o. Dr. Mile Buda ka 1, 35000 Slavonski Brod

Croatia

and produced in the manufacturing plant

DURO DAKOVIC KOMPENZATORI d.o.o. Dr. Mile Buda ka 1, 35000 Slavonski Brod

Croatia

This certificate attests that all provisions concerning the assessment and verification of constancy of performance and the performances described in Annex ZA of the standards

EN 1856-1: 2009, EN 1856-2: 2009

under system 2+ are applied and that

the factory production control fulfils all the prescribed requirements set out above.

This certificate was first issued on 7 June 2011 (under the CPD) and will remain val id as long as the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.

Bratislava, 15 July 2014

© PROMPt, tlačiareii cenin, a.s., Bratislava

Dipl. Ing. Daša Koza ova Head of Notified Body 1301