technical specification of the mobile sampling unit

2
Sampling pressure 6-7 bar Total volume of sample 1-16 m 3 Max productivity 32 m 3 /day Sampling time 1 h up to continuous sampling (12 h samples) Maximum weight of a module in sampling unit 62 kg Total weight of sampling unit About 350 kg Dimensions of sampling unit (width × depth ×height) 165 ×73× 130 cm Manual interaction Transport of sample columns to Base Camp. Change of carrier gas bottles (He). Start and stop of samplings and base camp measurements. Power consumption of sampling unit 2 kW mean, 4.5 kW peak Carrier gas consumption of sampling unit 0.25 m 3 per day Sample transfer columns (in mobile sampling unit) Four Set up time of the mobile sampling unit About 20 min Technical specification of the Mobile sampling unit

Upload: ilana

Post on 20-Feb-2016

30 views

Category:

Documents


2 download

DESCRIPTION

Technical specification of the Mobile sampling unit. Technical specification of the Mobile Sampling Unit in combination with processing and analysis in base camp . * System characteristic of base camp marked in red. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Technical specification of the Mobile sampling unit

Sampling pressure 6-7 bar

Total volume of sample 1-16 m3

Max productivity 32 m3/day

Sampling time 1 h up to continuous sampling (12 h samples)

Maximum weight of a module in sampling unit

62 kg

Total weight of sampling unit About 350 kg

Dimensions of sampling unit (width × depth ×height)

165 ×73× 130 cm

Manual interaction Transport of sample columns to Base Camp. Change of carrier gas bottles (He). Start and stop of samplings and base camp measurements.

Power consumption of sampling unit 2 kW mean, 4.5 kW peak

Carrier gas consumption of sampling unit 0.25 m3 per day

Sample transfer columns (in mobile sampling unit)

Four

Set up time of the mobile sampling unit About 20 min

Technical specification of the Mobile sampling unit

Page 2: Technical specification of the Mobile sampling unit

Sampling pressure 6-7 bar

Total volume of sample 1-16 m3

Max productivity 32 m3/day

Sampling time 1 h up to continuous sampling (12 h samples)

Concentration/separation time* 6 h

Measurement time* Variable. Produces IMS 2.0 data files

Maximum weight of a module in sampling unit

62 kg

Total weight of sampling unit About 350 kg

Total weight of processing unit* About 200 kg

Total weight of detector units (2 lead shields+ detectors)*

900 kg

Dimensions of sampling unit (width × depth ×height)

165 ×73× 130 cm

Dimensions of processing/measurement units unit (width × depth ×height)*

220 × 120 × 210 cm

Manual interaction Transport of sample columns to Base Camp. Change of carrier gas bottles (He). Start and stop of samplings and base camp measurements.

Isotopes measured* 131mXe, 133mXe, 133Xe,135Xe

Counting system* Beta-gamma coincidence

MDC* Nominal value 0.3 mBq/m3 for 133Xe, based on 16m3 atmospheric sample and 11 h measurement time.

Power consumption of sampling unit 2 kW mean, 4.5 kW peak

Carrier gas consumption of sampling unit 0.25 m3 per day

Carrier gas consumption of processing unit* 0.1 m3/day

Sample transfer columns (in mobile sampling unit)

Four

Archive bottles (in base camp)* Three, one used at a time

Set up time of the mobile sampling unit About 20 min

Technical specification of the Mobile Sampling Unit in combinationwith processing and analysis in base camp.

* System characteristic of base camp marked in red.