Smooth-Air

Due to a policy of continuous development, prices and specifications are subject to change without notice.

136

2 September 2019 Technical Catalogue See www.smooth-air.co.nz for most recent pricing

Christchurch264 Annex Road Riccarton 03 343 6184

Wellington15 Te Puni StreetPetone 04 566 7969

Auckland6 Stanway PlacePenrose 09 579 3257

0800 SMOOTH (0800 766 684)www.smooth-air.co.nzsales@smooth-air.co.nz

Tape & Sealants

Tape TR Reinforced Aluminium Foil Tape (type 2211F, from 2019)

Technical Data PRODUCT DESCRIPTION 2211F is a premium aluminum foil, laminated with an improved polyethylene mesh and coated with a high strength VTACK™ solvent based aggressive acrylic adhesive and protected by an easy peel release liner. Designed for use as a permanent vapor seal for reinforced aluminium faced fiberglass or mineral wool thermal insulation, fibrous and sheet metal ducts as well as FSK systems. Superior performance over a wide range of demanding temperatures and environments.

FEATURES • High performance tape designed for use as a vapor seal on aluminium faced

insulation products and sealing in HVAC ductwork application. • Foil-PE Mesh backing provides excellent reflection of both heat and light. • High quality adhesive with super strong adhesion and holding power. • Conforms well to irregular surfaces. • Low moisture vapor transmission rate makes 2211F an excellent vapor barrier. • Service Temperature range from -30C +120 C (-22F ~ +248 F).

TYPICAL PHYSICAL PROPERTIES PROPERTIES 1. METRIC 2. ENGLISH TEST METHOD

Backing Thickness 125 Micron 5.0 Mil PSTC-133 / ASTM D 3652

Total Thickness (without paper liner) 175 Micron 7.0 Mil PSTC-133 / ASTM D 3652

Adhesion to Steel 20 N/25mm 72 Oz./In. PSTC-101 / ASTM D 3330

Tack Rolling Ball 15 cm 5.0 In. PSTC-106 / ASTM D 3121

Tensile Strength 100 N/25mm 22.7 Lb/In PSTC-131 / ASTM D 3759

Elongation %. 25.0 PSTC-131 / ASTM D 3759

Service Temperature -30 +120 C -22 ~ +248 F ------------

Applying Temperature +10 ~ 40 C +50 ~ +105 F ------------

Early Fire Hazard Test - 0 - - 0 - AS/NZS 1530 part 3-1999

Volatile Organic Compound (VOC) < 1% of the weight of the product supplied

Ozone Depletion – ODP ODP Free (will not cause ozone depletion) PRODUCT FORM & SIZE AVAILABLE Cut Roll: 48mm, 72mm, 96mm Log Roll: 1200mm x 50m (contact AFC for other custom sizes)

STORAGE & SHELF LIFE: 12 months when stored at 21C (70F) / 50% relative humidity out of direct sunlight.

SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

The information supplied herein is presented in good faith and believed to be accurate to the best knowledge of the supplier. The technical information, recommendations and other statements contained in this document are based upon tests or experience that AFC believes are reliable, but the accuracy or completeness of such information is not guaranteed. It is also predicated on normal use of the product. However, since conditions of use are beyond our control, we make no warranties, expressed or implied as to the use of this information or to the suitability of product for a particular purpose. It is essential that the user test and evaluate the AFC Industries Pty Ltd (AFC) product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on AFC product between +10 ~ +40°C (+50 ~ +105 F). It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

Limited Warranty: For a period of 12 months from the date of sale, AFC Industries Pty Ltd warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion providing defective, or at our option, refund the purchase price thereof. The user assumes all other risk, if any, including injury, loss or damage, direct or consequential, arising out of the use, misuse, or the inability to use this product. This warranty is in lieu of the warranties of merchantability, fitness for purpose, and all other warranties, expressed or implied. No deviation is authorised. E&OE.

3M Authorised Distributor Venture Tapes ISO9001 Certified

2211F Reinforced Aluminium Foil Tape

The statements in this information sheet are based upon our knowledge and practical experience. The data is intended only as a source of information, is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.

Hea

tpum

p Su

pplie

s

Smooth-Air

2 September 2019 Technical Catalogue

Due to a policy of continuous development, prices and specifications are subject to change without notice.

136a

See www.smooth-air.co.nz for most recent pricing

Christchurch264 Annex Road Riccarton 03 343 6184

Wellington15 Te Puni StreetPetone 04 566 7969

Auckland6 Stanway PlacePenrose 09 579 3257

0800 SMOOTH (0800 766 684)www.smooth-air.co.nzsales@smooth-air.co.nz

Hea

tpum

p Su

pplie

s

Tape TR Reinforced Aluminium Foil Tape (type 1529CW from 2017-2019)

Venture Tape™ Reinforced Aluminum Foil Tape 1529CW

Technical Data September 2017

Product Description 3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW is an aluminum foil/expanded polyethylene laminate with a special cold weather acrylic pressure sensitive adhesive.

Product Construction Backing Adhesive Color Liner Standard Roll Length

Aluminum Foil / expanded PE

Acrylic Natural Aluminum / Black

Release Liner

55 yds (50 m)

Features • Bonds and seals at temperatures as low as -10°F • Excels in demanding temperatures

• Superior resistance to moisture and recommended for use in high humidity conditions

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Test

Typical Value

Typical Value (Metric)

Test Method

Total Tape Thickness

5.7 mils

0.15 mm

ASTM-D3652

Backing Thickness 4.7 mils 0.12 mm ASTM-D3652

Peal Adhesion

56 oz/in 16 N/25 mm ASTM-D3330

Tensile Strength 13 lb/in 58 N/25 mm ASTM-D3759

Elongation Service Temperature

15% -40° to 150°F

15% -40° to 66°C

ASTM-D3759

Application Ideas • High performance tape designed for use as a vapor seal on reinforced fiberglass and mineral wool thermal insulation

Classifications • UL723 Classified (0/0 Flame/Smoke Rating) [UL file #R10984]

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

Venture Tape™ Reinforced Aluminum Foil Tape 1529CW

Technical Data September 2017

Product Description 3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW is an aluminum foil/expanded polyethylene laminate with a special cold weather acrylic pressure sensitive adhesive.

Product Construction Backing Adhesive Color Liner Standard Roll Length

Aluminum Foil / expanded PE

Acrylic Natural Aluminum / Black

Release Liner

55 yds (50 m)

Features • Bonds and seals at temperatures as low as -10°F • Excels in demanding temperatures

• Superior resistance to moisture and recommended for use in high humidity conditions

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Test

Typical Value

Typical Value (Metric)

Test Method

Total Tape Thickness

5.7 mils

0.15 mm

ASTM-D3652

Backing Thickness 4.7 mils 0.12 mm ASTM-D3652

Peal Adhesion

56 oz/in 16 N/25 mm ASTM-D3330

Tensile Strength 13 lb/in 58 N/25 mm ASTM-D3759

Elongation Service Temperature

15% -40° to 150°F

15% -40° to 66°C

ASTM-D3759

Application Ideas • High performance tape designed for use as a vapor seal on reinforced fiberglass and mineral wool thermal insulation

Classifications • UL723 Classified (0/0 Flame/Smoke Rating) [UL file #R10984]

Venture Tape™ Reinforced Aluminum Foil Tape 1529CW

Technical Data September 2017

Product Description 3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW is an aluminum foil/expanded polyethylene laminate with a special cold weather acrylic pressure sensitive adhesive.

Product Construction Backing Adhesive Color Liner Standard Roll Length

Aluminum Foil / expanded PE

Acrylic Natural Aluminum / Black

Release Liner

55 yds (50 m)

Features • Bonds and seals at temperatures as low as -10°F • Excels in demanding temperatures

• Superior resistance to moisture and recommended for use in high humidity conditions

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Test

Typical Value

Typical Value (Metric)

Test Method

Total Tape Thickness

5.7 mils

0.15 mm

ASTM-D3652

Backing Thickness 4.7 mils 0.12 mm ASTM-D3652

Peal Adhesion

56 oz/in 16 N/25 mm ASTM-D3330

Tensile Strength 13 lb/in 58 N/25 mm ASTM-D3759

Elongation Service Temperature

15% -40° to 150°F

15% -40° to 66°C

ASTM-D3759

Application Ideas • High performance tape designed for use as a vapor seal on reinforced fiberglass and mineral wool thermal insulation

Classifications • UL723 Classified (0/0 Flame/Smoke Rating) [UL file #R10984]

Venture Tape™ Reinforced Aluminum Foil Tape 1529CW

Technical Data September 2017

Product Description 3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW is an aluminum foil/expanded polyethylene laminate with a special cold weather acrylic pressure sensitive adhesive.

Product Construction Backing Adhesive Color Liner Standard Roll Length

Aluminum Foil / expanded PE

Acrylic Natural Aluminum / Black

Release Liner

55 yds (50 m)

Features • Bonds and seals at temperatures as low as -10°F • Excels in demanding temperatures

• Superior resistance to moisture and recommended for use in high humidity conditions

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Test

Typical Value

Typical Value (Metric)

Test Method

Total Tape Thickness

5.7 mils

0.15 mm

ASTM-D3652

Backing Thickness 4.7 mils 0.12 mm ASTM-D3652

Peal Adhesion

56 oz/in 16 N/25 mm ASTM-D3330

Tensile Strength 13 lb/in 58 N/25 mm ASTM-D3759

Elongation Service Temperature

15% -40° to 150°F

15% -40° to 66°C

ASTM-D3759

Application Ideas • High performance tape designed for use as a vapor seal on reinforced fiberglass and mineral wool thermal insulation

Classifications • UL723 Classified (0/0 Flame/Smoke Rating) [UL file #R10984]

Venture Tape™ Reinforced Aluminum Foil Tape 1529CW

Technical Data September 2017

Product Description 3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW is an aluminum foil/expanded polyethylene laminate with a special cold weather acrylic pressure sensitive adhesive.

Product Construction Backing Adhesive Color Liner Standard Roll Length

Aluminum Foil / expanded PE

Acrylic Natural Aluminum / Black

Release Liner

55 yds (50 m)

Features • Bonds and seals at temperatures as low as -10°F • Excels in demanding temperatures

• Superior resistance to moisture and recommended for use in high humidity conditions

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Test

Typical Value

Typical Value (Metric)

Test Method

Total Tape Thickness

5.7 mils

0.15 mm

ASTM-D3652

Backing Thickness 4.7 mils 0.12 mm ASTM-D3652

Peal Adhesion

56 oz/in 16 N/25 mm ASTM-D3330

Tensile Strength 13 lb/in 58 N/25 mm ASTM-D3759

Elongation Service Temperature

15% -40° to 150°F

15% -40° to 66°C

ASTM-D3759

Application Ideas • High performance tape designed for use as a vapor seal on reinforced fiberglass and mineral wool thermal insulation

Classifications • UL723 Classified (0/0 Flame/Smoke Rating) [UL file #R10984]

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

3M™ Venture Tape™ Reinforced Aluminum Foil Tape 1529CW Storage Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50%

relative humidity are recommended.

Shelf Life To obtain best performance, use this product within 24 months from date of manufacture.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be

liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/construction

3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2017 All rights reserved.

Smooth-Air

Due to a policy of continuous development, prices and specifications are subject to change without notice.

136b

2 September 2019 Technical Catalogue See www.smooth-air.co.nz for most recent pricing

Christchurch264 Annex Road Riccarton 03 343 6184

Wellington15 Te Puni StreetPetone 04 566 7969

Auckland6 Stanway PlacePenrose 09 579 3257

0800 SMOOTH (0800 766 684)www.smooth-air.co.nzsales@smooth-air.co.nz

Hea

tpum

p Su

pplie

s

TR Tape

VentureTape® 1529CW is an aluminum foil/expanded polyethylene laminate tape coated with a special cold weather acrylic pressure sensitive adhesive that combines superior quick stick at normal temperatures with superior low temperature performance. Designed for use as a vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulation, VentureTape 1529CW has superior resistance to moisture and is recommended for use in high humidity conditions.

Features & Benefits• UL723 Classified (0/0 Flame/Smoke Rating),

UL file # R10984• High performance tape designed for use as a

Product Construction

Release Liner

Aluminum foil/expanded polyethyleneAcrylic Pressure Sensitive Adhesive

Typical Value Test

0714

• High performance tape designed for use as a vapor seal on aluminum faced insulation products

• Bonds and seals extremely well at temperatures as low as 10°F

• High performance solvent acrylic adhesiveperforms well over a wide temperature range

• In stock product available for immediate delivery

Product Configurations

Typical values are not intended to be used for specification development. Technical data is believed to be true and accurate; Venture Tape recommends that the purchaser test for fitness of use in all applications.

• Standard roll widths: 2”, 3”• Standard length: 50Y

Contact Venture Tape today for a complete list of products or a free sampleToll Free North America 800-343-1076From United Kingdom 0-800-962-957From Australia 1-800-122-797www.venturetape.com

Test Typical ValueTypical Value

(Metric)Test

MethodProduct Thickness 6.5 mils 0.17 mm PSTC-133Peel Adhesion ∆ 35 oz/in 9.7 N/25 mm PSTC-101Shear Adhesion >24 hrs @ 2.2 psi >24 hrs @ 15.2 kPa PSTC-107Tensile Strength 12 lb/in 54.2 N/25 mm PSTC-131Elongation 20 % 20 % PSTC-131Service Temperature -40 to 240 °F -40 to 116 °C

- excluding liner ∆ - 20 minute dwell

TR Venture 1529CW is an aluminium foil/expanded polyethylene laminate tape coated with a special cold weather acrylic pressure adhesive that combines superior quick stick at normal temperatures with superior low temperature performance.Designed for use as a vapour seal for reinforced aluminium faced fibreglass or mineral wool insulation, TR 1529CW has superior resistance to moisture and is recommended for use in high humidity conditions.Features and Benefits● UL723 Classified (0/0 Flame/Smoke Rating), UL file # R10984● High performance tape designed for use as a vapour seal on aluminium faced

insulation products● Bonds and seals extremely well at temperatures as low as -12°C● High performance solvent acrylic adhesive performs well over a wide temperature

range

Test Typical Value Test Method

Product Thickness (excluding liner) 0.17mm PSTC-133

Peel Adhesion (20 minute dwell) 9.7N/25mm PSTC-101

Shear Adhesion >24hrs@15.2kPa PSTC-107

Tensile Strength 54.2N/25mm PSTC-131

Elongation 20% PSTC-131

Service Temperature -40° to 116°C

Typical values are not intended for use for product specification development. Technical data is believed to be true and accurate.

Technical details for ACUKF4-120 are on p96h

This information is repeated on p27

Tape TR (to 2014)

Smooth-Air

2 September 2019 Technical Catalogue

Due to a policy of continuous development, prices and specifications are subject to change without notice.

136c

See www.smooth-air.co.nz for most recent pricing

Christchurch264 Annex Road Riccarton 03 343 6184

Wellington15 Te Puni StreetPetone 04 566 7969

Auckland6 Stanway PlacePenrose 09 579 3257

0800 SMOOTH (0800 766 684)www.smooth-air.co.nzsales@smooth-air.co.nz

Hea

tpum

p Su

pplie

s

Technical Data*Roll size 48mm x 50metre

Colour Silver

Thickness without liner 205 micron

Tensile Strength 100N / 25mm

Adhesion 180 25N/ 25mm

Elongation at break 25%

Temperature -15°C to + 70°C

Tested to Australian Standard 1530 Part 3 - 1976: Test for early fire hazard properties of materials.

Complies with requirements of Australian Standards 4254 - 2002

Ductwork for air - handling systems in buildings.

WVP - 0

Tape TR-4493

TR Tape

TR Tape

Code TR -4493DescriptionReinforced Aluminium Foil Tape #4493 48mm x 50mAluminium foil / Polyethylene mesh / film laminated backing, coated one side with a high tack and bonding synthetic adhesive (with flame resistant additives).Release Liner: Silicone coated paperAreas of useThe nature of the backing gives this product a rare combination of high strength, flexibility and conformability. Used for joining and securing flexible barrier duct wrap and acoustic products. The #4493 offers excellent moisture vapour protection on joints in insulation materials.Reinforced Pipe Lagging Tape

Surface PreparationThe surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. Therecommended application temperature is between 15°C and 25°C.

*The statements in this information sheet are based upon our knowledge and practical experience. The data is intended only as a source of information, is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.

This information is repeated on p27