te® accessories holder diy - s3.amazonaws.com · hang it on your bathroom mirror for your...
TRANSCRIPT
COLGATE® ACCESSORIES HOLDER DIY
A cool holder for your stuff!COLGATE® ACCESSORIES HOLDER DIY
• Toothpaste tube• Suction cup
MATERIALS:
• Hole punch• Scissors
TOOLS:
STEP 1 Cut your toothpaste tube 5 inches from where the cap meets the tube, and clean out the inside.
INSTRUCTIONS:
STEP 2
STEP 3
Fold over the top edge about 3/8ths of an inch inwards, then use your fingers to
smooth out any wrinkles in the tube.
Use your 1/4 inch hole punch to make a hole 3/4 inches down from the folded top.
Hang it on your bathroom mirror for your toothbrushes, or put some pens it and stick it next to your computer screen! The
possibilities are endless!
STEP 5
Carefully push your suction cup through the hole, making sure to not tear it.
STEP 4
TerraCycle®, the TerraCycle Logo® and Brigade® are all property of TerraCycle, Inc. used under license. ©2014
Colgate Pen Holder DIYA cool holder for your stuff!
Instructions:1. Cut your toothpaste tube 5 inches from where the cap meets the tube, and clean out the inside.2. Foldoverthetopedgeabout3/8thsofaninchinwards,thenuseyourfingerstosmoothoutanywrinkles in the tube.3. Use your 1/4 inch hole punch to make a hole 3/4 inches down from the folded top.4. Carefully push your suction cup through the hole, making sure to not tear it.5. Put some pens in it and stick it next to your computer screen, or maybe hang it on your bathroom mirror for your toothbrushes! The possibilities are endless!
Cool ending line:Help TerraCycle eliminate the idea of waste by taking a second look at materials you usually throw away!
HELP TERRACYCLE ELIMINATE THE IDEA OF WASTE BY TAKING A SECOND
LOOK AT MATERIALS YOU USUALLY THROW AWAY!