tc-yellow 46-47 total chaos... · 2015. 2. 9. · 3,&.83 5811(5 3,&.83 /dqgfuxlvhu 7xqgud...

CHAOSFAB.COM 951-737-9682

Volume 1_ACCESSORIESSection 1

FORD NISSAN INTERNATIONAL UNIVERSALTOYOTA || | |

http://www.chaosfab.com/

TOYOTA

7

15

17

19

28

29

31

40

41

43

46

47

49

53

54

56

60

Rear Accessories

Replacement / Tools

2001 - 2007 TOYOTA SEQUOIA Front Accessories

Replacement / Tools

2007 + TOYOTA TUNDRA 2WD / 4WD Front Accessories

Rear Accessories

Replacement / Tools

2000 - 2006 TOYOTA TUNDRA Front Accessories

Replacement / Tools

2007 + TOYOTA FJ CRUISER Front Accessories

TABLE OF CONTENTS: CLICK THE LINKS BELOW

2005 + TOYOTA TACOMA 6 LUG PRERUNNER & 4WD Front Accessories

Rear Accessories

Replacement / Tools

Rear Accessories

Replacement / Tools

2003 + TOYOTA 4RUNNER 2WD / 4WD - 6 LUG Front Accessories

Rear Accessories

2

62

63

64

65

70

72

74

79

80

82

87

88

93

94

97

FORD

100

101

102

Rear Accessories

Replacement / Tools

Replacement / Tools

1984 - 1995 TOYOTA 2WD PICKUP Front Accessories

Replacement / Tools

2010 + FORD RAPTOR Front Accessories

Replacement / Tools

1986 - 1995 TOYOTA 4WD PICKUP Front Accessories

Replacement / Tools

1986 - 1995 TOYOTA 4RUNNER Front Accessories

Rear Accessories

Replacement / Tools

1996 - 2002 TOYOTA 4RUNNER Front Accessories

Rear Accessories

2008 + TOYOTA LANDCRUISER 200 SERIES Front Accessories

Rear Accessories

Replacement / Tools

1996 - 2004 TOYOTA TACOMA Front Accessories

3

NISSAN

104

105

106

109

111

114

INTERNATIONAL TOYOTA

117

118

119

128

129

131

140

141

143

148

149

Replacement / Tools

TOYOTA PRADO 90 - SERIES Front Accessories

Rear Accessories

Replacement / Tools

Rear Accessories

Replacement / Tools


Rear Accessories

Replacement / Tools

2005 + TOYOTA HILUX VIGO Front Accessories

Replacement / Tools


98-04 NISSAN FRONTIER 2WD / 4WD Front Accessories

Replacement / Tools

98-04 NISSAN XTERRA 2WD / 4WD Front Accessories

2004 + NISSAN TITAN 2WD / 4WD Rear Accessories

Replacement / Tools

4

INTERNATIONAL NISSAN

152

155

REAR SUSPENSION

158

170

171

172

FORD COMPONENTS

NISSAN COMPONENTS

UNIVERSAL COMPONENTS

NISSAN NAVARA D22 Front Accessories

Replacement / Tools

TOYOTA COMPONENTS

5

https://www.facebook.com/pages/Total-Chaos-Fabrication-Inc/202032656503957

http://instagram.com/totalchaosfabrication

https://www.youtube.com/user/ChaosFabrication

84-95 PICKUP

86-95 4RUNNER

86-95 PICKUP

08+ Landcruiser

07-14 Tundra

01-07 Sequoia

00-06 Tundra

96-02 4Runner

96-04 Tacoma

07+ FJ Cruiser

03+ 4Runner

05+Tacoma

6

Kit Includes: WELD-ON SPINDLE GUSSET (PR)

Features / Benefits: • Must have reinforcement for anyone who wants to run hard in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets. • Eliminates the factory sway bar. • Welding and grinding are required to install. • Note: Gussets only, spindle not included.


Features / Benefits: • Must have reinforcement for anyone who wants to run hard in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets. • Retains the factory sway bar and includes an additional steering arm gusset. • Welding and grinding are required to install. • Trucks running factory back spacing wheels must run wheel spacers.• Note: Gussets only, spindle not included.

Click Here: Images & Additional Product Info

MSRP: $45.16


Part # 59698-SB SPINDLE GUSSETS WITH SWAYBAR MOUNTS

WELD-ON

MSRP: $63.02

WELD-ON

2005+ TACOMA 6 LUG PRERUNNER & 4WDFRONT ACCESSORIES

Part # 59698 SPINDLE GUSSETS

7


http://www.chaosfab.com/2005-2014-Tacoma-Off-Road-Suspension-Accessories.html


Kit Includes: (2) PLATED STEEL SPACERS

GRADE 8 HARDWARE

Features / Benefits: • Reduces inner CV angle by 3 degrees. • Reduces friction wear and tear on stock length axle inner CV boots with auto locking hubs. • 1" thick zinc plated steel spacers and grade 8 hardware are included.• Some vehicles may require additional washers to reinstall the factory skid plate.

Kit Includes: WELD ON TABS FOR FRONT & REAR

Features / Benefits: • Reinforces weak factory alignment cam tab plates that bend during bottom outs or hard front impacts. • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower cam alignment tabs will not bend like factory tabs.• Welding and grinding are required for installation.


MSRP: $36.76


Part # 59870 LOWER CONTROL ARM CAM TAB GUSSETS

WELD-ON

MSRP: $94.00

BOLT-ON


Part # 87200 1" DIFF. DROP SPACER

8




Kit Includes: WELD-ON COIL BUCKET GUSSETS (SET)

Features / Benefits: • Reduces upper coil bucket flex and double shears factory upper control arm bolt.• Compatible only with TC UCA's or L/T kits, not intended for use with factory control arms. • Welding and grinding are required to install.

Kit Includes: (2)CHROMOLY HOOPSSHOCK TABSGRADE 8 HARDWARE

Features / Benefits: • Reinforces the factory coil bucket and helps reduce flex. • Includes grade 8 hardware. • Lower shock mounting clevis is included. • 4130 prebent chromoly shock hoops are designed to install secondary

2.5" piggy back or bypass shocks for maximum IFS dampening control. • Installation of this system requires TC 86500 boxed lower control arms.• Upper shock tabs are tacked in place to aid in secondary shock location set up. • Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • Does NOT work with stock lower control arms.


MSRP: $94.53


Part # 86602 DUAL SHOCK HOOPS - STOCK LENGTH CONTROL ARMS

WELD-ON

MSRP: $420.00

WELD-ON


Part # 59653 UPPER COIL BUCKET TOWER GUSSETS

9





Features / Benefits: • Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" smooth body

or bypass shocks for maximum IFS dampening control. • Reinforces the factory coil bucket and helps reduce flex. • Upper shock tabs are tacked in place to aid in secondary shock location set up. • Includes grade 8 hardware.

Kit Includes: (2) BOLT-ON STEEL SKID PLATESMOUNTING HARDWARE

Features / Benefits: • Reduce hang ups on the trail with factory lower control arms. • Mounting hardware is included. • Bolt-on steel skid plates can be welded to factory lower arm for maximum strength.


MSRP: $389.00


Part # 86006 STOCK LOWER CONTROL ARM SKID PLATES

BOLT-ON

MSRP: $131.30

WELD-ON


Part # 86600 DUAL SHOCK HOOPS - LONG TRAVEL CONTROL ARMS

10




Kit Includes: (2) BOLT-ON STEEL SKID PLATESGRADE 8 HARDWARE

Features / Benefits: • Slide over rocks with an angled approach front lip. • Bolt-on aluminum lower skid plates are designed to fit

TC 3.5" long travel system lower control arms.• Grade 8 Mounting hardware is included.



TC 2" long travel system lower control arms.• Grade 8 Mounting hardware is included.


MSRP: $117.64


Part # 86007 LONG TRAVEL LOWER ARM SKID PLATES +2"

BOLT-ON

MSRP: $117.64

BOLT-ON


Part # 86005 LONG TRAVEL LOWER ARM SKID PLATES +3.5"

11




Kit Includes: (2) 3.5" LIFT SPINDLES (2) STAINLESS STEEL BRAIDED BRAKELINES

Features / Benefits: • Increases cross member ground clearance and adds 3.5" of lift.• Designed to strengthen and reinforce known weak areas. • Fully custom fabricated lift spindle uses CNC machined bearing

housings and caliper tabs with custom CNC laser cut parts. • Rugged boxed design for race or play applications.• Includes semi gloss black power coat. • Extended D.O.T. stainless braided brake lines are included. • These will only fit Prerunner & 6-lug 2WD vehicles.

Kit Includes: (2) LOWER CONTROL ARMS w/ BUSHINGSLOWER UNIBALL ADAPTERS w/ HARDWARE

Features / Benefits: • Racer inspired and constructed from 100% laser cut 4130 chromoly. • The lightest weight bolt on lower arm @ 16.5 pounds. • Maximizes vehicle ground clearance with integrated lower uniball cup.• Dual 2.5 shock capability provides maximum dampening control. • 1" 100% stainless steel uniball replaces factory lower ball joints. • Replaceable polyurethane pivot bushings include zerk fittings for easy maintenance. • 1.25" wheel spacers are required. • These arms will not fit the 05+ Hilux Vigo

MSRP: $1889.67


BOLT-ON

MSRP: $1469.51


Part # 86500R RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS

BOLT-ON

Part # 86350-LT 3.5" LIFT SPINDLES FOR TC UNIBALL LOWER CONTROL ARMS


Part # 86350 3.5" LIFT SPINDLES FOR FACTORY BALLJOINT LOWER CONTROL ARMS

12




Kit Includes: (2) LOWER CONTROL ARMS w/ BUSHINGLOWER UNIBALL ADAPTERS w/ HARDWARE

Features / Benefits: • 3/16" main body stock length fully boxed lower control arms are CNC laser cut and include internal gussets. • Boxed arms feature replaceable urethane pivot bushings. • Features a billet machined uniball adapter. • Lower ball joints are upgraded to a 1" stainless steel uniball

for maximum wheel travel and added component strength. • Pivots include zerk fitting to maintain the equipment while bolted on the vehicle. • 1/4" thick steel skid plate is integrated into the control arm for rock crawling protection. • Dual shock capable or Jounce Shock compatible. • Weld-on bump stop spacers are included. • These arms will not fit the 05+ Hilux Vigo

Kit Includes: (2) 4340 EXTENDED AXLE SHAFTS

Features / Benefits: • Designed for use with TC +3.5" long travel systems. • 4340 heat treated 3.5" extended axle shafts and clamps are included.• Re-uses factory Toyota inner and outer CV joints and boots.


MSRP: $1679.59


Part # 86301 LONG TRAVEL 4WD 4340 AXLES + 3.5" EXTENDED

BOLT-ON

MSRP: $603.98

BOLT-ON


Part # 86500 STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY

13





Features / Benefits: • Designed for use with TC +2" long travel systems. • 4340 heat treated 2" extended axle shafts and clamps are included.• Re-uses factory Toyota inner and outer CV joints and boots.

MSRP: $603.98



Part # 86305T LONG TRAVEL 4WD 4340 AXLES +2" EXTENDED

BOLT-ON

14



Kit Includes: BOLT-ON FOX AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWARE

Features / Benefits: • 100% bolt on bump stop bracket mount to the factory bolt holes

and replaces the factory bump stop.• Utilizes 2.5" travel FOX 2.0" diameter bump stops. • Increases handling and performance on and off road when

weight has been added to the bed of the truck. • Cushions harsh bottom outs. • Includes lower strike pad that bolts to the factory U bolt location. • Grade 8 hardware is included. • Note: Wheel spacers required.

Kit Includes: BOLT-ON KING AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWARE

Features / Benefits: • 100% bolt on bump stop bracket mount to the factory bolt holes

and replaces the factory bump stop.• Utilizes 2" travel KING 2.0" diameter bump stops. • Increases handling and performance on and off road when

weight has been added to the bed of the truck. • Cushions harsh bottom outs. • Includes lower strike pad that bolts to the factory U bolt location. • Grade 8 hardware is included. • Note: Wheel spacers are required.


MSRP: $420.16


Part # 48623K 2.0" REAR BUMP STOP KIT [KING]

BOLT-ON

MSRP: $472.68

BOLT-ON

2005+ TACOMA 6 LUG PRERUNNER & 4WDREAR ACCESSORIES

Part # 48623F 2.0" REAR BUMP STOP KIT [FOX]

15




Kit Includes: SHACKLES WITH BUSHINGS & INNER SLEEVES.GUSSETED U-BOLT PLATES.WELD ON SPRING PERCHES.BUMP STOP RELOCATION MOUNTS

Features / Benefits: • Increase suspension up travel for a smoother ride quality, and maximize articulation and comfort while off road. • TOTAL CHAOS designed this kit to offer a light duty or heavy duty specific spring pack from Deaver Leaf Spring. • Welding is required for this installation. • Wheel travel with custom shock mounts- Capable of 12" • Wheel travel specs: Wheel travel with stock mounting location shocks- 9.5" • Light weight springs are intended for trucks that will not regularly have added bed weight. • Heavy duty springs are designed for trucks with regular heavy loads such as camper shells,

motorcycles, bed racks and equipment. • Eliminate driver side bed sag on your Tacoma. Deaver now offers a driver & passenger side specific rear leaf spring. Driver side spring has additional arch to level the truck.• Retain factory rear shock mounts. Custom shock mounts can be installed to maximize wheel travel.• Prerunner model Tacoma's will require drive line modifications. Adding a slip yoke on the front end is necessary.• Designed to work with factory rubber bump stops or the TOTAL CHAOS 2.0 bump stop system for FOX & KING.• Wheel spacers must be installed to use stock wheels with the TC air bump or custom rear shock mounts built off the outer frame rail.

Kit Includes: LEAF SPRINGSBUSHINGSINNER SLEEVESU-BOLTS

WELD-ON

MSRP: $984.50


MSRP: $575.00


Part # DVR- 05TACOMIDHD DEAVER SPRINGS - HEAVY DUTYPart # DVR- 05TACOMIDLD DEAVER SPRINGS - LIGHT DUTY

WELD-ON

2005+ TACOMA 6 LUG PRERUNNER & 4WDREAR ACCESSORIES

Part # 86450 MID TRAVEL REAR- TACOMA SPRING UNDER CONVERSION

16




Kit Includes: (8) POLYURETHANE BUSHING HALVES

Features / Benefits: • Complete TC upper control arm urethane replacement bushing kit. • TC stocks all replacement parts necessary to maintain your performance equipment:

Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.• Contact our facility direct to order these items.• Performance parts will require periodic maintenance based on your driving habits & local conditions.

Kit Includes:

Features / Benefits: • Aids in the removal and reinstallation of a 1" uniball from any uniball cup during vehicle prep. • Designed to be used with any hydraulic press, shop press or a hammer.• Prevents damage to new uniball during reassembly.


MSRP: $54.62


Part # 96006 UNIBALL REMOVAL & RE-INSTALLATION TOOL

UNIBALL REMOVAL/REINSTALL TOOL

MSRP: $42.01

BOLT-ON

2005+ TACOMA 6 LUG PRERUNNER & 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS

Part # 69000 UPPER CONTROL ARM URETHANE BUSHING KIT

17





Features / Benefits: • Complete TC long travel suspension system replacement urethane bushing kit. • TC stocks all replacement parts necessary to maintain your performance equipment:


Kit Includes: (16) NYLATRON BUSHING HALVES

Features / Benefits: • Complete TC long travel suspension system replacement nylatron bushing kit.• Performance parts will require periodic maintenance based on your

driving habits & local conditions.• Recommended ONLY for race applications.• Nylatron bushings do not deflect road vibration like urethane bushings will.

These bushings require regular prep and maintenance. • TC stocks all replacement parts necessary to maintain your performance equipment:

Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms. • Contact our facility direct to order these items.


MSRP: $115.54


Part # 69700-NYL LONG TRAVEL NYLATRON BUSHING KIT

BOLT-ON

MSRP: $269.95

BOLT-ON

2005+ TACOMA 6 LUG PRERUNNER & 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS

Part # 69700 LONG TRAVEL URETHANE BUSHING KIT

18









MSRP: $45.16



WELD-ON

MSRP: $63.02

WELD-ON

2007 + FJ CRUISERFRONT ACCESSORIES


19


http://www.chaosfab.com/2007-2014-FJ-Cruiser-4Runner-Off-Road-Suspension-Accessories.html



GRADE 8 HARDWARE




WELD-ON

MSRP: $94.00


MSRP: $36.76


Part # 59870 LOWER CONTROL ARM CAM TAB GUSSETS (07-09)Part # 59870-10FJ LOWER CONTROL ARM CAM TAB GUSSETS (2010+)

BOLT-ON



20





Features / Benefits: • Reduces upper coil bucket flex and double shears factory upper control arm bolt.• Compatible only with TC UCA's or L/T kits, not intended for use with factory control arms. • Welding and grinding are required to install.• Not compatible with vehicles equipped with K.D.S.S.





MSRP: $94.53



WELD-ON

MSRP: $420.00

WELD-ON


Part # 59651 UPPER COIL BUCKET TOWER GUSSETS (07-09)

21








Features / Benefits: • Increases cross member ground clearance and adds 3.5" of lift.• Designed to strengthen and reinforce known weak areas. • Fully custom fabricated lift spindle uses CNC machined bearing housings

and caliper tabs with custom CNC laser cut parts. • Rugged boxed design for race or play applications.• Includes semi gloss black power coat. • Extended D.O.T. stainless braided brake lines are included. • These will only fit Prerunner & 6-lug 2WD vehicles.

BOLT-ON

MSRP: $1469.51


MSRP: $389.00


Part # 86350 3.5" LIFT SPINDLES FOR FACTORY BALLJOINT LOWER CONTROL ARMSPart # 86350-LT 3.5" LIFT SPINDLES FOR TC UNIBALL LOWER CONTROL ARMS

WELD-ON



22





Features / Benefits: • 3/16" main body stock length fully boxed lower control arms

are CNC laser cut and include internal gussets. • Boxed arms feature replaceable urethane pivot bushings.• Features a billet machined uniball adapter. • Lower ball joints are upgraded to a 1" stainless steel uniball


BOLT-ON

MSRP: $1679.59



Part # 86500 STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (07-09)Part # 86500-10FJ STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (2010+)

23





BOLT-ON

MSRP: $1889.67



Part # 86500R RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (07-09)Part # 86500R-FJ RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (2010+)

24









MSRP: $131.30



BOLT-ON

MSRP: $117.64

BOLT-ON



25










MSRP: $117.64



BOLT-ON

MSRP: $603.98

BOLT-ON



26






MSRP: $603.98



Part # 86305 LONG TRAVEL 4WD 4340 AXLES +2" EXTENDED

BOLT-ON

27


Kit Includes: (PR) LOWER LINK MOUNT SKIDS & HARDWARE

Features / Benefits: • 100% Bolt on. • Grade 8 - 9/16" mounting hardware is included.• Laser cut pre bent 3/16" mild steel brackets. • Compatible only with TC or stock links. • Can be welded on for maximum protection.

Kit Includes: (2) UPPER LINKS W/ BUSHINGS& GREASE ZERK FITTINGS & 7/8" HEIM JOINTS(2) LOWER LINKS W/ BUSHINGS& GREASE ZERK FITTINGS & 7/8" HEIM JOINTSPAN-HARD BAR W/ 3/4" HEIM'SMIS-ALINGMENT SPACERS

Features / Benefits: • 100% Bolt on. • Includes urethane pivot bushings.• Constructed from 1 1/4" .375 wall 4130 chromoly tubing for maximum strength. • Offers 1.5" more droop travel over stock when longer shocks are installed. • Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.• Hi-misalignment spacers are included.


MSRP: $105.03


Part # 86400 CHROMOLY ADJUSTABLE REAR LINKS

BOLT-ON

MSRP: $1353.97

BOLT-ON

2007 + FJ CRUISERREAR ACCESSORIES

Part # 48650 LOWER LINK SKIDS

28



Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62


2007 + FJ CRUISERTOTAL CHAOS REPLACEMENT PARTS & TOOLS


29













MSRP: $115.54



BOLT-ON

MSRP: $269.95

BOLT-ON

2007 + FJ CRUISERTOTAL CHAOS REPLACEMENT PARTS & TOOLS


30









MSRP: $45.16



WELD-ON

MSRP: $63.02

WELD-ON

2003+ 4RUNNER 2WD / 4WD - 6 LUGFRONT ACCESSORIES


31





GRADE 8 HARDWARE

Features / Benefits: • Reduces inner CV angle by 3 degrees. • Reduces friction wear and tear on stock length axle inner CV boots with auto locking hubs. • 1" thick zinc plated steel spacers and grade 8 hardware are included• Some vehicles may require additional washers to reinstall the factory skid plate.



WELD-ON

MSRP: $94.00


MSRP: $36.76


Part # 59870 LOWER CONTROL ARM CAM TAB GUSSETS (03-09)Part # 59870-10FJ LOWER CONTROL ARM CAM TAB GUSSETS (2010+)

BOLT-ON



32










MSRP: $94.53



WELD-ON

MSRP: $420.00

WELD-ON



33










BOLT-ON

MSRP: $1469.51


MSRP: $389.00



WELD-ON



34








BOLT-ON

MSRP: $1679.59



Part # 86500 STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (03-09)Part # 86500-10FJ STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (2010+)

35





BOLT-ON

MSRP: $1889.67



Part # 86500R RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (03-09)Part # 86500R-FJ RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (2010+)

36









MSRP: $131.30



BOLT-ON

MSRP: $117.64

BOLT-ON



37










MSRP: $117.64



BOLT-ON

MSRP: $603.98

BOLT-ON



38






MSRP: $603.98




BOLT-ON

39








MSRP: $105.03



BOLT-ON

MSRP: $1353.97

BOLT-ON

2003+ 4RUNNER 2WD / 4WD - 6 LUGREAR ACCESSORIES


40




Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62


2003+ 4RUNNER 2WD / 4WD - 6 LUGTOTAL CHAOS REPLACEMENT PARTS & TOOLS


41













MSRP: $115.54



BOLT-ON

MSRP: $269.95

BOLT-ON

2003+ 4RUNNER 2WD / 4WD - 6 LUGTOTAL CHAOS REPLACEMENT PARTS & TOOLS


42




Kit Includes: (2) PLATED STEEL SPACERSGRADE 8 HARDWARE

Features / Benefits: • Reduces inner CV angle by 3 degrees.• Reduces friction wear and tear on stock length axle inner CV boots with auto locking hubs.• 1" thick zinc plated steel spacers and grade 8 hardware are included• Some vehicles may require additional washers to reinstall the factory skid plate.


Features / Benefits: • Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets.• Welding and grinding are required to install.• Note: Gussets only, spindle not included.


MSRP: $36.76



WELD-ON

MSRP: $52.51

2007 + TUNDRA 2WD / 4WDFRONT ACCESSORIES

Part # 87200 07 + 4WD TOYOTA TUNDRA 1" DIFF. DROP SPACER

BOLT-ON

43


http://www.chaosfab.com/2007-2013-Tundra-Off-Road-Suspension-Accessories.html



Features / Benefits: • Reinforces weak factory alignment cam tab plates that bend

during bottom outs or hard front impacts.• CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower alignment cam tabs will not bend like factory tabs.• Welding and grinding are required for installation.

Kit Includes: (2) CHROMOLY HOOPSSHOCK TABSGRADE 8 HARDWARE

Features / Benefits: •Maximize vehicle dampening control when you install a dual shock hoop system.• 4130 prebent chromoly shock hoops are designed to install secondary 2.5"

shocks while retaining stock lower control arms.• Upper shock tabs are pre welded in place to aid in secondary shock set up.• Weld-on CNC laser cut lower shock tabs are included.• Includes grade 8 hardware.• Fiberglass fender NOT required to install this kit.• 1.25" wheel spacers are necessary or aftermarket wheels with 4.50" back spacing.


MSRP: $99.00



WELD-ON

MSRP: $555.66



WELD-ON

44




Kit Includes: (2) CHROMOLY HOOPSSHOCK TABSGRADE 8 HARDWARE

Features / Benefits: •Maximize vehicle dampening control when you install a dual

2.5" shock hoop system.• 4130 prebent chromoly shock hoops are designed to install secondary

2.5" smooth body or bypass shocks to maximize dampening control. • Reinforces the factory coil bucket and helps reduce flex. • Upper shock tabs are pre welded in place to

aid in secondary shock set up and installation. • Includes grade 8 hardware.


Features / Benefits: • Designed for use with TC 87000 long travel systems. • 4340 heat treated 2.5" extended axle shafts and clamps included. • Re-uses factory Toyota inner and outer CV joints and boots.


MSRP: $503.14


Part # 87300 LONG TRAVEL 4WD 4340 AXLES

BOLT-ON

MSRP: $630.24



WELD-ON

45




Kit Includes: (4) 3/8" THICK STEEL SHACKLES 14MM HARDWARE

Features / Benefits: • 100% Bolt on.• Hardware included.• Compatible with factory or aftermarket Deaver leaf springs.• Laser cut 3/8" steel shackles lift the rear of the Tundra 3/4" over stock.

Kit Includes: SHACKLES & HARDWAREWELD-ON UPPER & LOWER SHOCK MOUNTSGUSSETED U-BOLT PLATESBOLT-ON UPPER JOUNCE SHOCK MOUNTSWELD-ON BUMP STOP STRIKE PADEXTENDED STAINLESS STEEL BRAKE LINES

Features / Benefits: • Leaf springs bolt to factory front spring hanger location.• Weld on upper shock mount brackets mount under the bed. • Cutting, welding and grinding is required to install.• Maximizes rear suspension wheel travel without drilling holes in the bed. • Under the axle Deaver leaf spring conversion is designed to use 2.5" 2-tube bypass shocks. • TC bolt on Jounce bump stop frame bracket replaces factory rubber bump stop mounts. Weld on Lower strike pad is included. • TC extended shackles, weld on upper shock mounts, weld on lower shock mounts, u-bolt plates, extended brake line,

weld on strike pad for Jounce bump stops, TC bolt on Jounce bump stop mount, & hardware is included. Not Included: Deaver leaf springs, bushings, inner sleeves, u-bolts, shocks, Jounce bump stops, shocks or wheel spacers.


MSRP: $131.30


Part # 87400 07+ TUNDRA REAR SHOCK MOUNT KIT & LEAF SPRING CONVERSION

WELD-ON

MSRP: $1784.63

2007 + TUNDRA 2WD / 4WDREAR ACCESSORIES

Part # 49704 3/4" LIFT SHACKLES

BOLT-ON

46







Kit Includes: POLYURETHANE BUSHING HALVES




MSRP: $54.62



BOLT-ON

MSRP: $133.40

2007 + TUNDRA 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

47




Kit Includes:


MSRP: $42.01


2007 + TUNDRA 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS



48




Features / Benefits: • Must have reinforcement for anyone who wants to play in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets. • Welding and grinding are required to install.• Note: Gussets only, spindle not included.


Features / Benefits: • Eliminates the rack movement caused by worn out rubber bushings. • 100% bolt on.• Replaces all 3 factory rubber bushings.• Includes inner sleeves.


MSRP: $37.80


Part # 97701 URETHANE STEERING RACK BUSHING KIT

BOLT-ON

MSRP: $36.24

00-06 TUNDRAFRONT ACCESSORIES


WELD-ON

49





Features / Benefits: • Reduces upper coil bucket flex and double shears factory upper control arm bolt.• Welding and grinding are required to install.• Compatible only with TC UCA's or L/T kits, not intended for use with factory control arms.


Features / Benefits: • Tired of tearing inner CV boots when aftermarket lift kits have been installed? • 1" drop down spacer lowers the front differential and restores the factory inner CV angles.• Inexpensive upgrade to add extra life to rubber CV boots. Relax the angle on the inner CV joints by 2-3 degrees.• Some vehicles may require additional washers to reinstall the factory skid plate.


MSRP: $94.53



BOLT-ON

MSRP: $37.80



WELD-ON

50





Features / Benefits: • Reinforces the factory coil bucket and helps reduce flex. • Includes grade 8 hardware. • Upper shock tabs are tacked in place to aid in secondary shock location set up. • Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" or 2.0" FOX/KING smooth body

or bypass shocks for maximum IFS dampening control.


Features / Benefits: • Weld-on CNC laser cut lower shock tabs are included.• Includes grade 8 hardware. • 1.25" wheel spacers are necessary.• Upper shock tabs are tacked in place to aid in secondary shock location set up. • Fiberglass fenders NOT required to install this kit. Sway bar removal is necessary.• Maximize vehicle dampening control when you install a dual shock hoop system.• 4130 prebent chromoly shock hoops are designed to install secondary 2.5 or 2.0 shock while retaining stock lower control arms.


MSRP: $375.00



WELD-ON

MSRP: $410.00



WELD-ON

51




Kit Includes: (2) 4340 EXTENDED AXLE SHAFTS(2) HIGH ANGLE INNER CV BOOTS

Features / Benefits: • Designed for use with TC 97000 & 97004 long travel systems. • 4340 heat treated 3.5" extended axle shafts and high angle inner CV boots and clamps are included.

Kit Includes: (2) 7/8" CHROMOLY HEIMS W/ JAM NUTS(2) CHROMOLY TIE RODSDOUBLE SHEAR TAB (WELDING REQUIRED)(4) 7/8" - 5/8"HI-MISALIGNMENT SPACERSGRADE 8 HARDWARE

Features / Benefits: • Outer factory tie rods are replaced with 7/8" chromoly heim joints & heat treated 17-4 stainless steel hi-misalignment spacers.• 4130 chromoly tie-rod extensions are designed to work with long travel systems that are 3.5" extended.• Weld-on double shear tabs are included for added strength to the outer tie-rod mounting location. • Grade 8 hardware is supplied. • Drilling, welding, and grinding are required for installation.• Lower ball joint not included.


MSRP: $630.24


Part # 97099 LONG TRAVEL HEIM JOINT STEERING UPGRADE

WELD-ON

MSRP: $513.65



BOLT-ON

52




Kit Includes: (2) SHACKLES(4) BUSHINGS(2) INNER SLEEVES

Features / Benefits: • 100% bolt on.• Lowers rear suspension 3/4" & improves handling.• Reuses factory hardware.• Includes urethane bushings and inner sleeves.• For use with stock or after market leaf springs.• Required when doing an under axle leaf spring conversion.

MSRP: $198.53


00-06 TUNDRAREAR ACCESSORIES

Part # 49702 TUNDRA REAR LOWERING SHACKLES

BOLT-ON

53



Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62

00-06 TUNDRATOTAL CHAOS REPLACEMENT PARTS & TOOLS



54





Features / Benefits: • Complete TC long travel suspension system replacement urethane replacement bushing kit. • TC stocks all replacement parts necessary to maintain your performance equipment:


Kit Includes: BALL JOINT REMOVAL/SLUG ADAPTER TOOL

Features / Benefits: • Aids in the removal of the factory ball joint from the spindle. • Also designed to assist in the TC slug adapter installation. • Requires a large C clamp tool or ball joint press.

MSRP: $115.54


Part # 96005 BALL JOINT REMOVAL- SLUG ADAPTER INSTALL TOOLS

MSRP: $33.99


00-06 TUNDRATOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

55





Features / Benefits: • Must have reinforcement for anyone who wants to play in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets. • Welding and grinding are required to install.• Note: Gussets only, spindle not included.




MSRP: $37.80



BOLT-ON

MSRP: $36.24

01-07 SEQUOIAFRONT ACCESSORIES


WELD-ON

56









MSRP: $94.53



BOLT-ON

MSRP: $37.80



WELD-ON

57





Features / Benefits: • Reinforces the factory coil bucket and helps reduce flex. • Includes grade 8 hardware. • Upper shock tabs are tacked in place to aid in secondary shock location set up. • Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" or 2.0" FOX/KING smooth body

or bypass shocks for maximum IFS dampening control.


Features / Benefits: • Weld-on CNC laser cut lower shock tabs are included.• Includes grade 8 hardware. • 1.25" wheel spacers are necessary.• Upper shock tabs are tacked in place to aid in secondary shock location set up. • Fiberglass fenders NOT required to install this kit. Sway bar removal is necessary.• Maximize vehicle dampening control when you install a dual shock hoop system.• 4130 prebent chromoly shock hoops are designed to install secondary 2.5 or 2.0 shock while retaining stock lower control arms.


MSRP: $375.00



WELD-ON

MSRP: $410.00



WELD-ON

58




Kit Includes: (2) 4340 EXTENDED AXLE SHAFTS(2) HIGH ANGLE INNER CV BOOTS

Features / Benefits: • Designed for use with TC 97000 & 97004 long travel systems. • 4340 heat treated 3.5" extended axle shafts and high angle inner CV boots and clamps are included.

Kit Includes: (2) 7/8" CHROMOLY HEIMS W/ JAM NUTS(2) CHROMOLY TIE RODSDOUBLE SHEAR TAB (WELDING REQUIRED)(4) 7/8" - 5/8"HI-MISALIGNMENT SPACERSGRADE 8 HARDWARE

Features / Benefits: • Outer factory tie rods are replaced with 7/8" chromoly heim joints & heat treated 17-4 stainless steel hi-misalignment spacers.• 4130 chromoly tie-rod extensions are designed to work with long travel systems that are 3.5" extended.• Weld-on double shear tabs are included for added strength to the outer tie-rod mounting location. • Grade 8 hardware is supplied. • Drilling, welding, and grinding are required for installation.• Lower ball joint not included.


MSRP: $630.24



WELD-ON

MSRP: $513.65



BOLT-ON

59




Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62

01-07 SEQUOIATOTAL CHAOS REPLACEMENT PARTS & TOOLS



60









MSRP: $115.54



MSRP: $33.99


01-07 SEQUOIATOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

61




Kit Includes: BOXED LOWER ARMS1" STAINLESS STEEL UNIBALLSPOLYURETHANE PIVOT BUSHINGS17-4 STAINLESS HI-MISALIGNMENT SPACERSGRADE 8 HARDWARE4130 CHROMOLY LOWER ARM SKIDPLATESMODIFIED BALLJOINT CRADLES

Features / Benefits: • Fully boxed and internally gusseted bolt on lower control arms. • Chromoly & mild steel plated construction. • Upgrades factory lower ball joint with 1" stainless steel uniballs. • Pivots on replaceable urethane bushings. • Includes lower arm bolt on skid plates. • Sway bar compatible.

MSRP: $2699.00


2008+ LANDCRUISER 200 SERIESFRONT ACCESSORIES

Part # 87505 LC 200 SERIES LOWER CONTROL ARM W/ UNIBALL

BOLT-ON

62


http://www.chaosfab.com/2008-2013-Landcruiser-Off-Road-Suspension-Accessories.html

Kit Includes: 4130 CHROMOLY UPPER & LOWER LINKS4130 CHROMOLY PANHARD BAR1.250" & 7/8" CHROMOLY HEIM JOINTSPOLYURETHANE BUSHINGS

Features / Benefits: • 100% Bolt on. • Upper and lower links are constructed from 1 1/2" .188 wall 4130 chromoly tubing for maximum strength and feature massive 1.250" chromoly heim joints. • Panhard bar is constructed from 1 1/4" .250 wall 4130 chromoly tubing for maximum strength and uses 7/8" chromoly heims. • Includes greasable urethane pivot bushings. • Capable of more wheel travel with custom shocks and mounts.• Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.• Hi-misalignment spacers are included. Reuses factory hardware.

MSRP: $1889.67


2008+ LANDCRUISER 200 SERIESREAR ACCESSORIES

Part # 87450 LC 200 SERIES CHROMOLY ADJUSTABLE REAR LINKS

BOLT-ON

63






Kit Includes:



MSRP: $54.62




MSRP: $42.01

2008+ LANDCRUISER 200 SERIESTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

64





Features / Benefits: • Must have reinforcement for anyone who wants to run hard in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets. • Welding and grinding are required to install. • Note: Gussets only, spindle not included.


Features / Benefits: • Tired of tearing inner CV boots when aftermarket lift kits have been installed? • 1" drop down spacer lowers the front differential and restores the factory inner CV angles.• Inexpensive upgrade to add extra life to rubber CV boots. Relax the angle on the inner CV joints by 2-3 degrees.• Some vehicles may require additional washers to reinstall the factory skid plate.• Note: Gussets only, spindle not included.


MSRP: $37.80



BOLT-ON

MSRP: $37.80

96-04 TACOMA 6 LUGFRONT ACCESSORIES


WELD-ON

65







Features / Benefits: • Reinforces the factory coil bucket and helps reduce flex. • Includes grade 8 hardware. • Weld-on lower shock mounts are included.• 1.25" wheel spacers must be installed.• Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" piggy back

or bypass shocks for maximum IFS dampening control. • Upper shock tabs are tacked in place to aid in secondary shock location set up. • Sway bar removal is necessary.


MSRP: $26.26



WELD-ON

MSRP: $410.00



BOLT-ON

66





Features / Benefits: • Reinforces the factory coil bucket and helps reduce flex. • Includes grade 8 hardware. • Maximize vehicle dampening control when you install a dual 2.5" shock mount system. • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" or 2.0"

FOX/KING smooth body or bypass shocks for maximum IFS dampening control. • Upper shock tabs are tacked in place to aid in secondary shock location set up.

Kit Includes: WELD-ON TABS FOR FRONT & REAR

Features / Benefits: • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower alignment cam tabs will not bend like factory tabs.• Welding and grinding are required for installation.• Reinforces weak factory cam alignment tab plates that bend during bottom outs or hard front impacts.


MSRP: $375.00



WELD-ON

MSRP: $94.00



WELD-ON

67






Kit Includes: (2) TUNDRA MODIFIED AXLES W/ CV'S & BOOTS

Features / Benefits: • Required to be installed with all TC long travel 4wd systems. • Includes remanufactured Tundra axles and CV joints that are custom modified by TC• High angle inner CV boots and clamps are installed. • Fits Auto hub trucks only.


MSRP: $94.53


Part # 96300 LONG TRAVEL 4WD MODIFIED AXLES

BOLT-ON

MSRP: $933.81


Part # 59650 WELD-ON UPPER COIL BUCKET TOWER GUSSETS

WELD-ON

68




Kit Includes: (2) CHROMOLY HEIMS W/ JAM NUTS(2) CHROMOLY TIE RODSDOUBLE SHEAR TAB (WELDING REQUIRED)(4) 7/8" - 5/8"HI-MISALIGNMENT SPACERSGRADE 8 HARDWARE

Features / Benefits: • Maximize wheel travel and component strength while eliminating sloppy steering. • 4130 zinc plated extended chromoly tie-rods.• 3/4" 4130 chromoly heim joints replace factory outer tie rod ends. • Laser cut weld-on double shear steering arm gussets are included. • Grade 8 hardware and tapered steering arm adapters are supplied. • Designed to fit TC long travel systems ONLY. • NOTE: Lower ball joint not included.

MSRP: $513.65




WELD-ON

69



Kit Includes: WELD-ON FOX AIRBUMP MOUNTSLOWER STRIKE PAD

Features / Benefits: • Utilizes 2.5" travel FOX 2.0" diameter bump stops. • Cushions harsh bottom outs. • Grinding and welding are required for installation. • 1.25" wheel spacers must be installed. • Weld on bump stop bracket indexes above and below the frame for maximum strength. • Same equipment that is being used in military applications with 8000lb armored vehicles. • Increases handling and performance on and off road when weight has been added to the bed of the truck. • Includes lower strike pad that bolts to the factory U bolt location.

Kit Includes: WELD-ON KING AIRBUMP MOUNTSLOWER STRIKE PAD

Features / Benefits: • Utilizes 2.5" travel KING 2.0" diameter bump stops. • Cushions harsh bottom outs. • Grinding and welding are required for installation. • 1.25" wheel spacers must be installed. • Weld on bump stop bracket indexes above and below the frame for maximum strength. • Same equipment that is being used in military applications with 8000lb armored vehicles. • Increases handling and performance on and off road when weight has been added to the bed of the truck. • Includes lower strike pad that bolts to the factory U bolt location.


MSRP: $341.38


Part # 49623K 2.0" REAR BUMP STOP KIT [KING]

WELD-ON

MSRP: $393.75

96-04 TACOMA 6 LUGREAR ACCESSORIES

Part # 49623F 2.0" REAR BUMP STOP KIT [FOX]

WELD-ON

70




Kit Includes: WELD-ON UPPER & LOWER SHOCK MOUNTSINCLUDES HARDWARE

Features / Benefits: • Provides +3" of additional droop wheel travel and better ride quality. • Maximizes articulation while navigating over obstacles.• Outboard shock mounting location provides additional dampening control. • Utilizes a 2.0" emulsion, reservoir or bypass shock from FOX or KING. • 1.25" wheel spacers must be installed. • Grade 8 hardware included.• Compatible with the TOTAL CHAOS rear 2.0" bump stop kit. PT# 49623F/49623K• 3/16" mild steel upper and lower laser cut shock mounts are included. Welding is required for installation.

MSRP: $404.40


96-04 TACOMA 6 LUGREAR ACCESSORIES

Part # 49625 1996-2004 TACOMA REAR 2.0 SHOCK MOUNT KIT

WELD-ON

71



Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62

96-04 TACOMA 6 LUGTOTAL CHAOS REPLACEMENT PARTS & TOOLS



72









MSRP: $122.90



MSRP: $33.99


96-04 TACOMA 6 LUGTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

73









MSRP: $37.80



BOLT-ON

MSRP: $37.80

96-02 4RUNNERFRONT ACCESSORIES


WELD-ON

74


http://www.chaosfab.com/96-02-4Runner-Off-Road-Suspension-Accessories.html








MSRP: $26.26



WELD-ON

MSRP: $410.00



BOLT-ON

75








Features / Benefits: • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower alignment cam tabs will not bend like factory tabs.• Welding and grinding are required for installation.• Reinforces weak factory alignment cam tab plates that bend during bottom outs or hard front impacts.


MSRP: $375.00



WELD-ON

MSRP: $94.00



WELD-ON

76









MSRP: $94.53



BOLT-ON

MSRP: $933.81



WELD-ON

77





Features / Benefits: • Maximize wheel travel and component strength while eliminating sloppy steering.• 4130 zinc plated extended chromoly tie-rods.• 3/4" 4130 chromoly heim joints replace factory outer tie rod ends.• Laser cut weld-on double shear steering arm gussets are included.• Grade 8 hardware and tapered steering arm adapters are supplied.• Designed to fit TC long travel systems ONLY.• NOTE: Lower ball joint not included.

MSRP: $513.65




WELD-ON

78



Kit Includes: (2) UPPER LINKS W/ BUSHINGS& GREASE ZERK FITTINGS & 7/8" HEIM JOINTS(2) LOWER LINKS W/ BUSHINGS& GREASE ZERK FITTINGS & 7/8" HEIM JOINTSPAN-HARD BAR W/ 3/4" HEIM'SMIS-ALIGNMENT SPACERS

Features / Benefits: • 100% Bolt on. • Constructed from 1 1/4" .375 wall 4130 chromoly tubing for maximum strength. • Includes urethane pivot bushings.• Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.• Hi-misalignment spacers are included. Reuses factory hardware.

MSRP: $1353.97


96-02 4RUNNERREAR ACCESSORIES


BOLT-ON

79



Kit Includes:






MSRP: $42.01



BOLT-ON

MSRP: $54.62

96-02 4RUNNERTOTAL CHAOS REPLACEMENT PARTS & TOOLS



80









MSRP: $122.90



MSRP: $33.99


96-02 4RUNNERTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

81




Kit Includes: IDLER ARMIDLER ARM MOUNTGRADE 8 HARDWARE

Features / Benefits: • Custom 100% bolt on idler arm eliminates sloopy steering and provides

better steering response when larger tires are installed.• Designed to handle extreme elements & perform under race conditions.• Laser cut brackets bolt to the factory idler arm mounting location. • Fully rebuild able idler arm features double stacked sealed roller bearings.• 3/4" Grade 8 hardware includes an inner sleeve to prevent over tightening during maintenance. • Idler arm comes pre assembled.





MSRP: $389.17


Part # 95130-RHD CADDY IDLER ARM - RIGHT HAND DRIVE

BOLT-ON

MSRP: $456.92

86-95 TOYOTA 4WD PICKUPFRONT ACCESSORIES

Part # 95130 CADDY IDLER ARM

BOLT-ON

82


http://www.chaosfab.com/86-95-4WD-Pickup-Off-Road-Suspension-Accessories.html


Kit Includes: (2) 1" UNIBALLS(2) CUSTOM 3/4" GRADE 8 BOLTS(4) HI-MISALIGNMENT SPACERS(2) 4130 BILLET UNIBALL CUPS

Features / Benefits: • Designed to add strength and replace factory lower ball joints that become worn or damaged during off road use.• 4130 CNC billet machined lower uniball adapters bolt to the factory spindle.• Fits aftermarket suspension systems that retain factory ball joints & spindle.• 1" uniballs feature a stainless steel ball and race for added corrosion resistance. • TC heat treated custom 17-4 stainless steel hi-misalignment spacers are included. • Custom tapered head grade 8 hardware allows for maximum articulation and travel. • Must drill lower control arm tapered hole to 3/4" for installation.

Kit Includes: PRE-BENT CHROMOLY HOOPSSHOCK TABS FOR DUAL SHOCKSRESERVOIR MOUNTSCHROMOLY SUPPORT TUBES

Features / Benefits: • Pre-bent 4130 chromoly shock hoops are designed to install 8" 2.5 coilover shocks from FOX/KING/Sway A Way.• CNC laser cut cross shaft bolt on plates are used to construct the coil over shock mount tower that ties into main shock hoop.• Extended cross shaft hardware is supplied.• Included pre cut 4130 chromoly support tubes to maximize upper shock mount strength. • Secondary shock tabs, weld on remote reservoir mounts and grade 8 hardware is included.


MSRP: $441.17


Part # 95602 GEN 2 "CADDY" KIT SHOCK HOOPS

WELD-ON

MSRP: $325.00


Part # 95140 LOWER UNIBALL CONVERSION

BOLT-ON

83




Kit Includes: (4) 3/4" CHROMOLY HEIMS(2) 12.5" CHROMOLY TIE RODS

GRADE 8 HARDWARE

Features / Benefits: • Maximize wheel travel and component strength while eliminating sloppy steering.• 4130 zinc plated extended chromoly tie-rods.• 3/4" 4130 chromoly heim joints replace factory inner and outer tie rod ends.• Laser cut weld-on double shear steering arm gussets are included. • Grade 8 hardware and tapered steering arm adapters supplied.• Designed to fit TC long travel systems ONLY.

Kit Includes: FRAME TRUSS

Features / Benefits: • 4130 Chromoly frame truss mounts between rear lower a-arm pivots to prevent frame spread from the weight of the motor during harsh bottom outs.• Welding is required for installation.

MSRP: $70.00


WELD-ON

MSRP: $513.65


Part # 95286 TRUSS (FITS 1986-1988 MODELS)

WELD-ON


Part # 95099 HEIM-STEERING UPGRADE

(2) DOUBLE-SHEAR STEERING GUSSE

84






Kit Includes: GUSSETED FACTORY CENTERLINKGUSSET FACTORY PITMAN ARMPITMAN ARM CORE CHARGE $125

Features / Benefits: • Increase steering response and upgrade component durability with this race proven steering system. • TC gusseted factory centerlink bolts to the stock location.• TC gusseted 4130 chromoly pitman arm features a 3/4" ID stainless steel uniball. (core is required)• Grade 8 hardware is supplied.• Fully rebuild-able system. • Vehicle must have "Caddy" Idler arm and heim tie-rods to install.


MSRP: $70.00


Part # 95695 4WD KING KONG STEERING SYSTEM

BOLT-ON

MSRP: $709.02



WELD-ON

85




Kit Includes: (2) SOLID ENGINE MOUNTS W/ BUSHINGS(1) SOLID TRANSMISSION MOUNT W/ BUSHINGS(1) TRANSMISSION CROSSMEMBERGRADE 8 HARDWARE

Features / Benefits: • Grade 8 hardware is supplied. • Designed and intended for fully caged vehicles. • Parts not sold individually.• Fits 86-95 4wd 22RE 4cyl with manual transmission ONLY. • This bolt on system is designed to eliminate the flex caused by factory rubber mounts.• Solid engine mounts feature polyurethane bushings to eliminate deflection.• Manual transmission mount bolts to the factory location and include polyurethane bushings to eliminate deflection.• 1 3/4" 4130 chromoly transmission cross member bolts to factory location.

MSRP: $971.62



Part # 95400 22R/22RE 86-95 4WD SOLID MOTOR AND MANUAL TRANS MOUNT KIT

BOLT-ON

86



Kit Includes: (12) URETHANE BUSHINGS

Features / Benefits: • TC stocks all replacement parts necessary to maintain your performance equipment:

Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.• Complete TC long travel suspension system replacement urethane replacement bushing kit. • Contact our facility direct to order these items.• Performance parts will require periodic maintenance based on your driving habits & local conditions.

Kit Includes:



MSRP: $78.78




MSRP: $42.01

86-95 TOYOTA 4WD PICKUPTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

87











MSRP: $389.17


Part # 95130-RHD CADDY IDLER ARM - RIGHT HAND DRIVE

BOLT-ON

MSRP: $456.92

86-95 TOYOTA 4RUNNERFRONT ACCESSORIES

Part # 95130 CADDY IDLER ARM

BOLT-ON

88




Kit Includes: (2) 1" UNIBALLS(2) CUSTOM 3/4" GRADE 8 BOLTS(4) HI-MISALIGNMENT SPACERS(2) 4130 BILLET UNIBALL CUPS

Features / Benefits: • Designed to add strength and replace factory lower ball joints that become worn or damaged during off road use.• 4130 CNC billet machined lower uniball adapters bolt to the factory spindle.• Fits aftermarket suspension systems that retain factory ball joints & spindle.• 1" uniballs feature a stainless steel ball and race for added corrosion resistance. • TC heat treated custom 17-4 stainless steel hi-misalignment spacers are included. • Custom tapered head grade 8 hardware allows for maximum articulation and travel. • Must drill lower control arm tapered hole to 3/4" for installation.

Kit Includes: PRE-BENT CHROMOLY HOOPSSHOCK TABS FOR DUAL SHOCKSRESERVOIR MOUNTSCHROMOLY SUPPORT TUBES

Features / Benefits: • Pre-bent 4130 chromoly shock hoops are designed to install 8" 2.5 coilover shocks from FOX/KING/Sway A Way.• CNC laser cut cross shaft bolt on plates are used to construct the coil over shock mount tower that ties into main shock hoop.• Extended cross shaft hardware is supplied.• Included pre cut 4130 chromoly support tubes to maximize upper shock mount strength. • Secondary shock tabs, weld on remote reservoir mounts and grade 8 hardware is included.


MSRP: $441.17


Part # 95602 GEN 2 "CADDY" KIT SHOCK HOOPS

WELD-ON

MSRP: $325.00


Part # 95140 LOWER UNIBALL CONVERSION

BOLT-ON

89





GRADE 8 HARDWARE

Features / Benefits: • Maximize wheel travel and component strength while eliminating sloppy steering.• 4130 zinc plated extended chromoly tie-rods.• 3/4" 4130 chromoly heim joints replace factory inner and outer tie rod ends.• Laser cut weld-on double shear steering arm gussets are included. • Grade 8 hardware and tapered steering arm adapters supplied.• Designed to fit TC long travel systems ONLY.



MSRP: $70.00


WELD-ON

MSRP: $513.65



WELD-ON



(2) DOUBLE-SHEAR STEERING GUSSE

90






Kit Includes: GUSSETED FACTORY CENTERLINKGUSSET FACTORY PITMAN ARMPITMAN ARM CORE CHARGE $125

Features / Benefits: • Increase steering response and upgrade component durability with this race proven steering system. • TC gusseted factory centerlink bolts to the stock location.• TC gusseted 4130 chromoly pitman arm features a 3/4" ID stainless steel uniball. (core is required)• Grade 8 hardware is supplied.• Fully rebuild-able system. • Vehicle must have "Caddy" Idler arm and heim tie-rods to install.


MSRP: $70.00


Part # 95695 4WD KING KONG STEERING SYSTEM

BOLT-ON

MSRP: $709.02



WELD-ON

91




Kit Includes: (2) SOLID ENGINE MOUNTS W/ BUSHINGS(1) SOLID TRANSMISSION MOUNT W/ BUSHINGS(1) TRANSMISSION CROSSMEMBERGRADE 8 HARDWARE

Features / Benefits: • Grade 8 hardware is supplied. • Designed and intended for fully caged vehicles. • Parts not sold individually.• Fits 86-95 4wd 22RE 4cyl with manual transmission ONLY. • This bolt on system is designed to eliminate the flex caused by factory rubber mounts.• Solid engine mounts feature polyurethane bushings to eliminate deflection.• Manual transmission mount bolts to the factory location and include polyurethane bushings to eliminate deflection.• 1 3/4" 4130 chromoly transmission cross member bolts to factory location.

MSRP: $971.62



Part # 95400 22R/22RE 86-95 4WD SOLID MOTOR AND MANUAL TRANS MOUNT KIT

BOLT-ON

92






Kit Includes:



MSRP: $78.78




MSRP: $42.01

86-95 TOYOTA 4RUNNERTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

93




Kit Includes: (2) 4130 BILLET CROSS SHAFTS(4) PLATED END WASHERS(4) GREASE FITTINGSGRADE 8 HARDWARE

Features / Benefits: • Grade 8 hardware is gun drilled for zerk fittings. • 100% Bolt on billet cross shafts solve the 2wd 5 lug weak link when larger tires are installed.• Zinc plated 4130 heat treated chromoly billet cross shafts bolt to factory location

and are designed to be used with TC suspension systems ONLY. • Custom keyed locking end washers lock into position. This is designed to prevent over tightening or having the bolt back out. • Zerk fitting allow you to lubricate bushings while control arms are bolted on the vehicle.


GRADE 8 HARDWARE

Features / Benefits: • 4130 zinc plated extended chromoly tie-rods.• Designed to fit TC long travel systems ONLY.• Maximize wheel travel and component strength while eliminating sloppy steering.• 3/4" 4130 chromoly heim joints replace factory inner and outer tie rod ends.• Laser cut weld-on double shear steering arm gussets are included. • Grade 8 hardware and tapered steering arm adapters supplied.

MSRP: $513.65


MSRP: $372.89



(2) STEERING ARM GUSSETS

WELD-ON


Part # 92420 84-95 2WD TOYOTA BILLET CROSS SHAFTS 5 LUG

BOLT-ON

94




Kit Includes: CHROMOLY IDLER ARM & BRACKETCHROMOLY CENTER LINK W/ 3/4" HEIMCHROMOLY PITMAN ARMGRADE 8 HARDWARE

Features / Benefits: • Preassembled ready for installation. • Idler arm is 100% re-buildable.• Grade 8 hardware is included.• Increase steering response and upgrade component durability with this race proven steering system.• Laser cut idler arm bracket bolts to the factory mounting location. • Custom 4130 chromoly centerlink includes a 3/4" chromoly heim joint.• Gusseted 4130 chromoly pitman arm is included. Specify power steering or non power steering models. (core is required)




MSRP: $1119.62


Part # 92695 2WD TOYOTA KING KONG STEERING SYSTEM (FITS ALL 1989-1995 w/o Power Steering)

BOLT-ON

MSRP: $1119.62


Part # 92688 2WD TOYOTA KING KONG STEERING SYSTEM (FITS ALL 1984-1988)

BOLT-ON

95






Kit Includes: (2) SOLID ENGINE MOUNTS W/ BUSHINGS(1) SOLID TRANSMISSION MOUNT W/ BUSHINGSGRADE 8 HARDWARE

Features / Benefits: • Grade 8 hardware is supplied. • Parts not sold individually.• Designed and intended for fully caged vehicles. • This bolt on motor and transmission mount kit is designed to eliminate flex caused by factory rubber bushing mounts.• Engine mounts bolt to the factory location and include polyurethane bushings to eliminate deflection.• Manual transmission mount bolts to the factory location and include polyurethane bushings to eliminate deflection.• Fits 84-95 2wd 22RE 4cyl with manual transmission ONLY.


MSRP: $1119.62


Part # 92400 22R/22RE SOLID MOTOR & MANUAL TRANS MOUNTS

BOLT-ON

MSRP: $455.03


Part # 92695P 2WD TOYOTA KING KONG STEERING SYSTEM (FITS ALL 1989-1995 w/ Power Steering)

BOLT-ON

96




Kit Includes: NYLATRON BUSHING HALVES

Features / Benefits: • Recommended ONLY for race applications.• Contact our facility direct to order these items.• Complete TC long travel suspension system replacement nylatron bushing kit.• TC stocks all replacement parts necessary to maintain your performance equipment:

Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.• Performance parts will require periodic maintenance based on your driving habits & local conditions.• Nylatron bushings do not deflect road vibration like urethane bushings will. These bushings require regular prep and maintenance.



Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.• Complete TC long travel suspension system replacement urethane replacement bushing kit.• Contact our facility direct to order these items.• Performance parts will require periodic maintenance based on your driving habits & local conditions.


MSRP: $199.58



BOLT-ON

MSRP: $57.77



BOLT-ON

97




Kit Includes:


MSRP: $42.01





98



2010+ Raptor

99

Kit Includes: 4130 BOXED LOWER CONTROL ARMS1" STAINLESS STEEL UNIBALLS17-4 STAINLESS HI-MISALIGNMENT SPACERSPOLYURETHANE PIVOT BUSHINGSWELD-ON ECCENTRIC CAM TABS & BOLTSWELD-ON HEIM SWAYBAR ENDLINKS

Features / Benefits: • Tired of constantly realigning your Raptor after you off road? TOTAL CHAOS lower control arms

include a chromoly weld-on lower alignment cam tab designed to reinforce the factory alignment bracket and securely retain your alignment settings after installation. Larger 3/4" 12pt grade 8 hardware is also supplied.

• TOTAL CHAOS 4130 chromoly boxed plate and internally gusseted lower control arms feature steering stops and incorporate 1" uniballs that upgrade and replace factory lower ball joints.

• Tapered lower misalignment adapters require no drilling to the spindle for installation and heat treated 17-4 stainless hi-misalignment spacers are included.

• 100% stainless steel uniballs that feature a military grade woven PTFE liner provide maximum wheel travel, rust prevention and added component strength.

• Massive polyurethane pivot bushings are used to absorb road vibration and reduce the daily driving harsh feelcompared to solid mounted uniball lower pivot systems that wear out more frequently. TC pivots include zerk fittings for easy greasing.

• Retain the factory sway bar system, TC's kit includes heim-joint lower end links & hardware.• Designed to work with stock coil over shock or any aftermarket manufacturer's 3.0 extended travel upgrade.• Durable 3-stage powder coat with a clear coat supplies long lasting protection.• Made 100% in the U.S.A.

MSRP: $2699.00

2010+ FORD RAPTORFRONT ACCESSORIES

Part # 80515 STOCK LENGTH BOLT-ON UNIBALL LOWER CONTROL ARMS

BOLT-ON

100



http://www.chaosfab.com/2010-2013-Ford-Raptor-Off-Road-Suspension-Accessories.html

Kit Includes: LOWERING SHACKLESURETHANE BUSHINGS & INNER SLEEVES

Features / Benefits: • 100% bolt on.• Lowers rear suspension 3/4" & improves handling.• Reuses factory hardware.• Includes urethane bushings and inner sleeves.• For use with stock or after market leaf springs.

MSRP: $209.03


2010+ FORD RAPTORREAR ACCESSORIES

Part # 48502 3/4" FORD RAPTOR LOWERING SHACKLE

BOLT-ON

101



Kit Includes:

Features / Benefits: • Aids in the removal and reinstallation of a 1" uniball from any uniball cup during vehicle prep.• Designed to be used with any hydraulic press, shop press or a hammer.• Prevents damage to new uniball during reassembly.

MSRP: $42.01


2010+ FORD RAPTORTOTAL CHAOS REPLACEMENT PARTS & TOOLS



102



98-04 Xterra

98-04 Frontier

04+ Titan

103



MSRP: $194.32


2004+ NISSAN TITAN 2WD / 4WDREAR ACCESSORIES

Part # 49504 TITAN REAR LOWERING SHACKLES

BOLT-ON

104


http://www.chaosfab.com/2004-2013-Nissan-Titan-Off-Road-Rear-Suspension-Accessories.html


Features / Benefits: • Complete TC upper control arm urethane replacement bushing kit.• TC stocks all replacement parts necessary to maintain your performance equipment:


Kit Includes:

Features / Benefits: • Aids in the removal and reinstallation of a 1" uniball from any uniball cup during vehicle prep.• Designed to be used with any hydraulic press, shop press or a hammer.• Prevents damage to new uniball during reassembly.

BOLT-ON

2004+ NISSAN TITAN 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS



MSRP: $54.62




MSRP: $42.01

105




Kit Includes: IDLER ARM BRACE

Features / Benefits: • Reinforces factory idler arm mount.

Kit Includes: (4) 3/4" CHROMOLY HEIMS(2) 11.5" CHROMOLY TIE RODSGRADE 8 HARDWARE

Features / Benefits: • 4130 Chromoly tie rods.• Grade 8 hardware included.• Teflon lined heim joints & heat treated mis-alignment spacers are included.• For use with TC long travel system only.

BOLT-ON

98-04 NISSAN FRONTIER 2WD / 4WDFRONT ACCESSORIES

Part # 91131 NISSAN IDLER ARM GUSSET


MSRP: $50.13


Part # 91099 HEIM-JOINT TIE-ROD UPGRADE (LONG TRAVEL ARMS)

WELD-ON

MSRP: $561.99

106


http://www.chaosfab.com/98-04-Nissan-Frontier-Off-Road-Rear-Suspension-Accessories.html



Features / Benefits: • 4130 Chromoly tie rods.• Grade 8 hardware included.• Teflon lined heim joints & heat treated mis-alignment spacers are included.• For use with stock length arms only.


Features / Benefits: • Designed for use with TC 91440 long travel systems.• 4340 heat treated 3" extended axle shafts and clamps included.• Re-uses factory Nissan inner and outer CV joints and boots.• Note: 98-01 Vehicles require 25 spline outer CV's from a 01-04 Nissan 4wd vehicle.

WELD-ON


Part # 91099S HEIM-JOINT TIE-ROD UPGRADE (STOCK LENGTH ARMS)


MSRP: $561.99



BOLT-ON

MSRP: $603.98

107




Kit Includes: CHROMOLY HOOPS & SUPPORT TUBESSHOCK TABSRESERVOIR MOUNTSGRADE 8 HARDWARE

Features / Benefits: • Pre-bent 4130 chromoly shock hoops are designed to install 8" 2.5 coil over shocks from FOX / KING / Sway A Way.• Included pre cut 4130 chromoly support tubes to maximize upper shock mount strength.• Secondary shock tabs, weld on remote reservoir mounts and grade 8 hardware is included.

Kit Includes: CHROMOLY IDLER ARMIDLER ARM BRACECHROMOLY CENTERLINKGUSSETED PITMAN ARMGRADE 8 HARDWARE

Features / Benefits: • Increase steering response and upgrade component durability with this race proven steering system.• Preassembled ready for installation.• Laser cut idler arm bracket bolds to the factory mounting location.• Idler arm is 100% re-buildable.• Custom 4130 chromoly centerlink.• Gusseted 4130 chromoly pitman arm is included.• Grade 8 hardware is included.• Note: Core charge on pitman arm of $75.00 is required. Installation of TC Part # 91099 is required to install steering kit.

WELD-ON


Part # 91600 SHOCK HOOP


MSRP: $299.00


Part # 91698 NISSAN 4X2 / 4X4 / DESERT RUNNER KING KONG STEERING KIT

BOLT-ON

MSRP: $730.03

108







Kit Includes: UNIBALL REMOVAL/REINSTALL TOOL



98-04 NISSAN FRONTIER 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

MSRP: $122.90



MSRP: $42.01

109







MSRP: $54.62


98-04 NISSAN FRONTIER 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

110






Features / Benefits: • 4130 Chromoly tie rods. • Grade 8 hardware included. • Teflon lined heim joints & heat treated mis-alignment spacers are included. • For use with TC long travel system only.

BOLT-ON

98-04 NISSAN XTERRA 2WD / 4WDFRONT ACCESSORIES



MSRP: $50.13



WELD-ON

MSRP: $561.99

111


http://www.chaosfab.com/98-04-Nissan-Xterra-Off-Road-Rear-Suspension-Accessories.html



Features / Benefits: • 4130 Chromoly tie rods. • Grade 8 hardware included. • Teflon lined heim joints & heat treated mis-alignment spacers are included. • For use with stock length arms only.


Features / Benefits: • Designed for use with TC 91440 long travel systems. • 4340 heat treated 3" extended axle shafts and clamps included.• Re-uses factory Nissan inner and outer CV joints and boots. • Note: 98-01 Vehicles require 25 spline outer CV's from a 01-04 Nissan 4wd vehicle.

WELD-ON




MSRP: $561.99



BOLT-ON

MSRP: $603.98

112







Features / Benefits: • Increase steering response and upgrade component durability with this race proven steering system.• Preassembled ready for installation.• Laser cut idler arm bracket bolds to the factory mounting location.• Idler arm is 100% re-buildable.• Custom 4130 chromoly centerlink.• Gusseted 4130 chromoly pitman arm is included.• Grade 8 hardware is included.• Note: Core charge on pitman arm of $75.00 is required. Installation of TC Part # 91099 is required to install steering kit.

WELD-ON




MSRP: $299.00



BOLT-ON

MSRP: $730.03

113










98-04 NISSAN XTERRA 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

MSRP: $122.90



MSRP: $42.01

114







MSRP: $54.62


98-04 NISSAN XTERRA 2WD / 4WDTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

115



PRADO 90 - SERIES

INTERNATIONAL

PRADO 150 - SERIES

PRADO 120 - SERIES

05+ HILUX VIGO

116



MSRP: $63.02


05+ TOYOTA HILUX VIGOFRONT ACCESSORIES

Part # 59698-V SPINDLE GUSSETS WITH SWAYBAR MOUNTS

WELD-ON

117


http://www.chaosfab.com/Toyota-Prado-Hilux-Off-Road-Suspension-Accessories.html







05+ TOYOTA HILUX VIGOTOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

MSRP: $54.62



MSRP: $42.01

118





Features / Benefits: • Must have reinforcement for anyone who wants to run hard in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets.• Eliminates the factory sway bar.• Welding and grinding are required to install.• Note: Gussets only, spindle not included.


Features / Benefits: • Must have reinforcement for anyone who wants to run hard in the dirt!• Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.• 1/8" prebent laser cut mild steel brackets.• Retains the factory sway bar and includes an additional steering arm gusset.• Welding and grinding are required to install.• Trucks running factory back spacing wheels must run wheel spacers.• Note: Gussets only, spindle not included.

WELD-ON

TOYOTA PRADO 150 - SERIESFRONT ACCESSORIES



MSRP: $45.16



WELD-ON

MSRP: $63.02

119





GRADE 8 HARDWARE




BOLT-ON


Part # 87200 DIFF. DROP SPACER


MSRP: $36.76


Part # 59870-10FJ LOWER CONTROL ARM CAM TAB GUSSETS

WELD-ON

MSRP: $94.00

120










WELD-ON




MSRP: $420.00



WELD-ON

MSRP: $389.00

121







BOLT-ON

MSRP: $1469.51




122







MSRP: $1679.59



Part # 86500-10FJ STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (2010+)

BOLT-ON

123





MSRP: $1889.67



Part # 86500R-FJ RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (2010+)

BOLT-ON

124








BOLT-ON




MSRP: $131.30



BOLT-ON

MSRP: $117.64

125









BOLT-ON




MSRP: $117.64



BOLT-ON

MSRP: $603.98

126






MSRP: $603.98




BOLT-ON

127







BOLT-ON

TOYOTA PRADO 150 - SERIESREAR ACCESSORIES



MSRP: $105.03



BOLT-ON

MSRP: $1353.97

128




Kit Includes:






TOYOTA PRADO 150 - SERIESTOTAL CHAOS REPLACEMENT PARTS & TOOLS



MSRP: $42.01



BOLT-ON

MSRP: $54.62

129












BOLT-ON




MSRP: $115.54



BOLT-ON

MSRP: $269.95

130








WELD-ON




MSRP: $45.16



WELD-ON

MSRP: $63.02

131





GRADE 8 HARDWARE



Features / Benefits: • Reinforces weak factory alignment cam tab plates that bend during bottom outs or hard front impacts. • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower alignment cam tabs will not bend like factory tabs.• Welding and grinding are required for installation.

BOLT-ON




MSRP: $36.76


Part # 59870 LOWER CONTROL ARM CAM TAB GUSSETS (03-09)

WELD-ON

MSRP: $94.00

132







Features / Benefits: • Includes grade 8 hardware. • Reinforces the factory coil bucket and helps reduce flex. • Lower shock mounting clevis is included. • 4130 prebent chromoly shock hoops are designed to install secondary


WELD-ON




MSRP: $94.53



WELD-ON

MSRP: $420.00

133










WELD-ON



BOLT-ON

MSRP: $1469.51


MSRP: $389.00



134








MSRP: $1679.59



Part # 86500 STOCK UNIBALL LOWER CONTROL ARMS WITH DUAL SHOCK CAPABILITY (03-09)

BOLT-ON

135





MSRP: $1889.67



Part # 86500R RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS (03-09)

BOLT-ON

136








BOLT-ON




MSRP: $131.30



BOLT-ON

MSRP: $117.64

137









BOLT-ON




MSRP: $117.64



BOLT-ON

MSRP: $603.98

138






MSRP: $603.98




BOLT-ON

139







BOLT-ON




MSRP: $105.03



BOLT-ON

MSRP: $1353.97

140




Kit Includes:









MSRP: $42.01



BOLT-ON

MSRP: $54.62

141












BOLT-ON




MSRP: $115.54



BOLT-ON

MSRP: $269.95

142








WELD-ON




MSRP: $37.80



BOLT-ON

MSRP: $37.80

143









BOLT-ON




MSRP: $26.26



WELD-ON

MSRP: $410.00

144








Features / Benefits: • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.• 1/4" thick lower alignment cam tabs will not bend like factory tabs.• Welding and grinding are required for installation.• Reinforces weak factory alignment cam tab plates that bend during bottom outs or hard front impacts.

WELD-ON




MSRP: $375.00



WELD-ON

MSRP: $94.00

145








WELD-ON




MSRP: $94.53



BOLT-ON

MSRP: $933.81

146





Features / Benefits: • Maximize wheel travel and component strength while eliminating sloppy steering. • 4130 zinc plated extended chromoly tie-rods.• 3/4" 4130 chromoly heim joints replace factory outer tie rod ends. • Laser cut weld-on double shear steering arm gussets are included. • Grade 8 hardware and tapered steering arm adapters are supplied. • Designed to fit TC long travel systems ONLY. • NOTE: Lower ball joint not included.

MSRP: $513.65




WELD-ON

147





MSRP: $1353.97




BOLT-ON

148



Kit Includes:









MSRP: $42.01



BOLT-ON

MSRP: $54.62

149












BOLT-ON

MSRP: $122.90



MSRP: $33.99

150




NAVARA D22

INTERNATIONAL

151




Features / Benefits: • 4130 Chromoly tie rods. • Grade 8 hardware included. • Teflon lined heim joints & heat treated mis-alignment spacers are included. • For use with TC long travel system only.

BOLT-ON

NISSAN NAVARA D22FRONT ACCESSORIES



MSRP: $50.13



WELD-ON

MSRP: $561.99

152


http://www.chaosfab.com/accessories.php?id=91420



Features / Benefits: • 4130 Chromoly tie rods. • Grade 8 hardware included. • Teflon lined heim joints & heat treated mis-alignment spacers are included. • For use with stock length arms only.


Features / Benefits: • Designed for use with TC 91440 long travel systems. • 4340 heat treated 3" extended axle shafts and clamps included.• Re-uses factory Nissan inner and outer CV joints and boots. • Note: 98-01 Vehicles require 25 spline outer CV's from a 01-04 Nissan 4wd vehicle.

WELD-ON




MSRP: $561.99



BOLT-ON

MSRP: $603.98

153







Features / Benefits: • Increase steering response and upgrade component durability with this race proven steering system. • Preassembled ready for installation. • Laser cut idler arm bracket bolds to the factory mounting location.• Idler arm is 100% re-buildable.• Custom 4130 chromoly centerlink.• Gusseted 4130 chromoly pitman arm is included.• Grade 8 hardware is included. • Note: Core charge on pitman arm of $75.00 is required. Installation of TC Part # 91099 is required to install steering kit

WELD-ON




MSRP: $299.00



BOLT-ON

MSRP: $730.03

154










NISSAN NAVARA D22TOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

MSRP: $122.90



MSRP: $42.01

155







MSRP: $54.62


NISSAN NAVARA D22TOTAL CHAOS REPLACEMENT PARTS & TOOLS


BOLT-ON

156



UNIVERSAL

NISSAN

FORD

TOYOTA

REAR SUSPENSION157

Kit Includes: (2) U-BOLT PLATES

Features / Benefits: • Intended to be installed with 2.5" wide after market leaf springs mounted under the rear axle. • Recesses leaf spring pin into plate to prevent shifting.• Designed to protect u-bolt nuts.

Kit Includes: (2) WELD-ON HANGERSGRADE 8 HARDWARE

Features / Benefits: • Laser cut brackets weld to frame and include grade 8 hardware. • Developed to relocate front spring hangers for leaf spring conversions.• Designed to use 2.5" aftermarket leaf springs.• Grinding and welding are necessary to install.


MSRP: $84.03


Part # 40060 FRONT SPRING HANGERS (96-04 TACOMA)

WELD-ON

MSRP: $131.83

REAR SUSPENSION TOYOTA ACCESSORIES

Part # 40020 U-BOLT RELOCATION PLATES (TOYOTA PICKUP / TACOMA 84-04)

BOLT-ON

158


http://www.chaosfab.com/Toyota-Off-Road-Rear-Suspension-Accessories.html


Kit Includes: LASER CUT BRACKETS (PR)GRADE 8 HARDWARE

Features / Benefits: • Laser cut brackets weld to frame and include grade 8 hardware.• Designed to use 2.5" aftermarket leaf springs.• Grinding and welding are necessary to install.• Developed to relocate front spring hangers for leaf spring conversions.

Kit Includes: LASER CUT BRACKETS (PR)GRADE 8 HARDWARE

Features / Benefits: • Laser cut brackets weld to frame and include grade 8 hardware.• Designed to use 2.5" aftermarket leaf springs.• Grinding and welding are necessary to install.• Developed to relocate front spring hangers for leaf spring conversions.


MSRP: $131.83


Part # 40062 FRONT SPRING HANGERS (84-95 TOYOTA PICKUP)

WELD-ON

MSRP: $131.83


Part # 40060 FRONT SPRING HANGERS (96-02 4RUNNER)

WELD-ON

159




Kit Includes: (2) WELD-ON HANGERSGRADE 8 HARDWARE

Features / Benefits: • Laser cut brackets weld to frame and include grade 8 hardware. • Developed to relocate front spring hangers for leaf spring conversions.• Designed to use 2.5" aftermarket leaf springs.• Grinding and welding are necessary to install.

Kit Includes: BOLT-ON FOX AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWAREGRADE 8 HARDWARE

Features / Benefits: • 100% bolt on bump stop bracket mount to the factory bolt holes and replaces the factory bump stop.• Utilizes 2.5" travel FOX 2.0" diameter bump stops. • Increases handling and performance on and off road when weight has been added to the bed of the truck. • Cushions harsh bottom outs. • Includes lower strike pad that bolts to the factory U bolt location. • Note: Wheel spacers required.


MSRP: $131.83


Part # 48623F 2.0" REAR BUMP STOP KIT [FOX] (05+ TACOMA PRERUNNER/ 4WD)

BOLT-ON

MSRP: $420.16


Part # 40062 FRONT SPRING HANGERS (84-95 4RUNNER)

WELD-ON

160




Kit Includes: BOLT-ON KING AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWAREGRADE 8 HARDWARE

Features / Benefits: • 100% bolt on bump stop bracket mount to the factory bolt holes and replaces the factory bump stop.• Utilizes 2" travel KING 2.0" diameter bump stops. • Increases handling and performance on and off road when weight has been added to the bed of the truck. • Cushions harsh bottom outs. • Includes lower strike pad that bolts to the factory U bolt location. • Note: Wheel spacers required.

Kit Includes: 3/16" MILD STEEL SKIDPLATESGRADE 8 HARDWARE

Features / Benefits: • 100% Bolt on.• Grade 8 - 9/16" mounting hardware is included.• Laser cut pre bent 3/16" mild steel brackets.• Compatible only with TC or stock links.• Can be welded on for maximum protection.


MSRP: $472.68


Part # 48650 LOWER LINK SKIDS (03-09 4RUNNER)

BOLT-ON

MSRP: $105.03


Part # 48623K 2.0" REAR BUMP STOP KIT [KING] (05+ TACOMA PRERUNNER/ 4WD)

BOLT-ON

161




Kit Includes: WELD-ON KING AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWAREGRADE 8 HARDWARE

Features / Benefits: • Cushions harsh bottom outs. • Utilizes 2.5" travel KING 2.0" diameter bump stops. • Same equipment that is being used in military applications with 8000lb armored vehicles. • Increases handling and performance on and off road. when weight has been added to the bed of the truck. • 1.25" wheel spacers must be installed. • Grinding and welding are required for installation. • Includes lower strike pad that bolts to the factory U bolt location. • Weld on bump stop bracket indexes above and below the frame for maximum strength.

Kit Includes: (2) SHACKLES(4) BUSHINGS(2) INNER SLEEVES

Features / Benefits: • 100% bolt on.• Lowers rear suspension 3/4" & improves handling.• Reuses factory hardware.• Includes urethane bushings and inner sleeves.• For use with stock or after market leaf springs.• Required when doing an under axle leaf spring conversion.


MSRP: $393.75


Part # 49702 TUNDRA REAR LOWERING SHACKLES (00-06 TUNDRA)

BOLT-ON

MSRP: $198.53


Part # 49623K 2.0" REAR BUMP STOP KIT [KING] (96-04 TACOMA)

WELD-ON

162




Kit Includes: (4) 3/8" THICK STEEL SHACKLES 14MM HARDWARE

Features / Benefits: • 100% Bolt on.• Hardware included.• Compatible with factory or aftermarket Deaver leaf springs.• Laser cut 3/8" steel shackles lift the rear of the Tundra 3/4" over stock.


Features / Benefits: • 100% Bolt on. • Includes urethane pivot bushings.• Hi-misalignment spacers are included.• Constructed from 1 1/4" .375 wall 4130 chromoly tubing for maximum strength. • Offers 1.5" more droop travel over stock when longer shocks are installed. • Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.


MSRP: $131.30


Part # 86400 CHROMOLY ADJUSTABLE REAR LINKS (03+ 4RUNNER)

BOLT-ON

MSRP: $1353.97


Part # 49704 2007 + TOYOTA TUNDRA 3/4" LIFT SHACKLES

BOLT-ON

163




Kit Includes: SHACKLES WITH BUSHINGS & INNER SLEEVES.GUSSETED U-BOLT PLATES.WELD ON SPRING PERCHES.BUMP STOP RELOCATION MOUNTS

Features / Benefits: • Increase suspension up travel for a smoother ride quality, and maximize articulation and comfort while off road. • TOTAL CHAOS designed this kit to offer a light duty or heavy duty specific spring pack from Deaver Leaf Spring. • Welding is required for this installation. • Wheel travel with custom shock mounts- Capable of 12" • Wheel travel specs: Wheel travel with stock mounting location shocks- 9.5" • Light weight springs are intended for trucks that will not regularly have added bed weight. • Heavy duty springs are designed for trucks with regular heavy loads such as camper shells,

motorcycles, bed racks and equipment. • Eliminate driver side bed sag on your Tacoma. Deaver now offers a driver & passenger side specific rear leaf spring. Driver side spring has additional arch to level the truck.• Retain factory rear shock mounts. Custom shock mounts can be installed to maximize wheel travel.• Prerunner model Tacoma's will require drive line modifications. Adding a slip yoke on the front end is necessary.• Designed to work with factory rubber bump stops or the TOTAL CHAOS 2.0 bump stop system for FOX & KING.• Wheel spacers must be installed to use stock wheels with the TC air bump or custom rear shock mounts built off the outer frame rail.

Kit Includes: LEAF SPRINGSBUSHINGSINNER SLEEVESU-BOLTS

WELD-ON

MSRP: $984.50


MSRP: $575.00


Part # DVR- 05TACOMIDHD DEAVER SPRINGS - HEAVY DUTYPart # DVR- 05TACOMIDLD DEAVER SPRINGS - LIGHT DUTY


Part # 86450 MID TRAVEL REAR- TACOMA SPRING UNDER CONVERSION

WELD-ON

164




Kit Includes: SHACKLES & HARDWAREWELD-ON UPPER & LOWER SHOCK MOUNTSGUSSETED U-BOLT PLATESBOLT-ON UPPER JOUNCE SHOCK MOUNTSWELD-ON BUMP STOP STRIKE PADEXTENDED STAINLESS STEEL BRAKE LINES

Features / Benefits: • Weld on upper shock mount brackets mount under the bed. • Leaf springs bolt to factory front spring hanger location.• Cutting, welding and grinding is required to install.• Maximizes rear suspension wheel travel without drilling holes in the bed. • Under the axle Deaver leaf spring conversion is designed to use 2.5" 2-tube bypass shocks. • TC bolt on Jounce bump stop frame bracket replaces factory rubber bump stop mounts. Weld on Lower strike pad is included. • TC extended shackles, weld on upper shock mounts, weld on lower shock mounts, u-bolt plates, extended brake line,

weld on strike pad for Jounce bump stops, TC bolt on Jounce bump stop mount, & hardware is included. Not Included: Deaver leaf springs, bushings, inner sleeves, u-bolts, shocks, Jounce bump stops, shocks or wheel spacers.

MSRP: $1784.63



Part # 87400 07+ TUNDRA REAR SHOCK MOUNT KIT & LEAF SPRING CONVERSION

WELD-ON

165



Kit Includes: WELD-ON FOX AIRBUMP MOUNTSLOWER STRIKE PAD & HARDWAREGRADE 8 HARDWARE

Features / Benefits: • Cushions harsh bottom outs. • 1.25" wheel spacers must be installed. • Utilizes 2.5" travel FOX 2.0" diameter bump stops. • Same equipment that is being used in military applications with 8000lb armored vehicles. • Increases handling and performance on and off road when weight has been added to the bed of the truck. • Includes lower strike pad that bolts to the factory U bolt location. • Grinding and welding are required for installation. • Weld on bump stop bracket indexes above and below the frame for maximum strength.

MSRP: $341.38



Part # 49623F 2.0" REAR BUMP STOP KIT [FOX] (96-04 TACOMA)

WELD-ON

166








MSRP: $1353.97


Part # 40020 U-BOLT RELOCATION PLATES (NISSAN HARDBODY / FRONTIER/ XTERRA 84-04)

BOLT-ON

MSRP: $84.03


Part # 96450 CHROMOLY ADJUSTABLE REAR LINKS (96-02 4RUNNER)

BOLT-ON

167









MSRP: $105.03


Part # 86400 CHROMOLY ADJUSTABLE REAR LINKS (2007 + FJ CRUISER)

BOLT-ON

MSRP: $1353.97


Part # 48650 LOWER LINK SKIDS (2007 + FJ CRUISER)

BOLT-ON

168




Kit Includes: WELD-ON UPPER & LOWER SHOCK MOUNTSINCLUDES HARDWARE

Features / Benefits: • Provides +3" of additional droop wheel travel and better ride quality. • Maximizes articulation while navigating over obstacles.• Outboard shock mounting location provides additional dampening control. • Utilizes a 2.0" emulsion, reservoir or bypass shock from FOX or KING. • 1.25" wheel spacers must be installed. • Grade 8 hardware included.• Compatible with the TOTAL CHAOS rear 2.0" bump stop kit. PT# 49623F/49623K• 3/16" mild steel upper and lower laser cut shock mounts are included. Welding is required for installation.

MSRP: $404.40



Part # 49625 1996-2004 TACOMA REAR 2.0 SHOCK MOUNT KIT

WELD-ON

169








MSRP: $209.03


Part # 48502 3/4" 2010+ FORD RAPTOR LOWERING SHACKLE

BOLT-ON

MSRP: $209.03

REAR SUSPENSION FORD ACCESSORIES

Part # 48502 3/4" 2004+ FORD F-150 LOWERING SHACKLE

BOLT-ON

170









MSRP: $194.32


Part # 40020 U-BOLT RELOCATION PLATES NISSAN HARDBODY / FRONTIER / XTERRA 84-04)

BOLT-ON

MSRP: $84.03

REAR SUSPENSION NISSAN ACCESSORIES

Part # 49504 TITAN REAR LOWERING SHACKLES

BOLT-ON

171




Kit Includes: (2) SHOCK MOUNTS(4) SPACERSGRADE 8 HARDWARE

Features / Benefits: • Places lower shock eyelet 7" off of housing. • Intended for 3" axle housings, can be ground to fit larger applications.• Welding is required to install. • Grade 8 hardware included.• Laser cut 1/4" thick plates are pre welded with gussets that are designed to protect lower shock rod ends.

Kit Includes: CHROMOLY TRAILING ARMS (PR) NYLATRON BUSHINGS

Features / Benefits: • 49.5" in length.• Constructed out of 1/8" thick 4130 chromoly interlocking internal brackets.• TC uses an 1 3/4" .120 bottom tube to connect the interlocking internal reinforcement plates.• Lower shock mounts are intended to mount 2.5" coil over and 3.0" bypass shocks.• Designed using 2.25" O.D. front pivots. Nylatron bushings are included for the front pivots.• Rear mount features an 1 1/4" double pinch bolt threaded bung. • Custom trailing arm mounts and upper links must be fabricated to install.

MSRP: $2100.00


WELD-ON

MSRP: $131.83


Part # 49500 CHROMOLY TRAILING ARMS

WELD-ON

REAR SUSPENSION UNIVERSAL ACCESSORIES

Part # 40080F WELD-ON REAR AXLE SHOCK MOUNTS (SPACING 1.5")Part # 40080S WELD-ON REAR AXLE SHOCK MOUNTS (SPACING 1.25")

172




Kit Includes: (4) PIVOT GUSSETSGRADE 8 HARDWARE

Features / Benefits: • Designed to reinforce and strengthen the mounting location on top or below

the frame rail where TC 9" or 12" shackles have been mounted. • Laser cut 10 gauge gussets are pre bent and notched ready to weld. • Grinding and welding are necessary for installation.• Note: Pivot not included.

Kit Includes: (2) SHACKLES W/ WELD ON SLEEVE & BUSHINGSGRADE 8 HARDWARE

Features / Benefits: • 4130 Chromoly tubing 9" long shackles. • Custom fabrication is required for installation. • Grade 8 hardware & urethane bushings are included. • Designed to be installed with 2.5" wide leaf spring applications.


MSRP: $47.79


Part # 40900 9" CHROMOLY SHACKLES (TOYOTA UNIVERSAL)

WELD-ON

MSRP: $314.07

REAR SUSPENSION UNIVERSAL ACCESSORIES (TOYOTA)

Part # 40450 SHACKLE PIVOT GUSSETS (TOYOTA UNIVERSAL)

WELD-ON

173




Kit Includes: (2) SHACKLES W/ WELD ON SLEEVE & BUSHINGSGRADE 8 HARDWARE

Features / Benefits: • 4130 Chromoly tubing 12" long shackles. • Custom fabrication is required for installation. • Grade 8 hardware & urethane bushings are included. • Designed to be installed with 2.5" wide leaf spring applications.

Kit Includes: ALUMINUM JACK SKIDPLATE

Features / Benefits: • Designed to assist mounting a jack to a truck bed or roll cage.• Designed to fit a Craftsman aluminum racing jack only.• CNC laser cut aluminum is prebent for ease of installation.


MSRP: $314.07


Part # 44110 BOLT-ON CRAFTSMAN ALUMINUM JACK SKIDPLATE

BOLT-ON

MSRP: $120.80

REAR SUSPENSION UNIVERSAL ACCESSORIES (TOYOTA)

Part # 41200 12" CHROMOLY SHACKLES (TOYOTA UNIVERSAL)

WELD-ON

174




tc-yellow 46-47 total chaos... · 2015. 2. 9. · 3,&.83 5811(5 3,&.83 /dqgfuxlvhu 7xqgud...

Documents