Easy-to-use software

connecting to Unisystem’s marine scales

Log Each individual weighing is stored in the computer just by pressing a button on the scale or by clicking a button in eSeaIndicator.

Report eSeaIndicator will display reports of the catch. Different reports can be chosen where the catch can be viewed as totals for each haul or for each weighing/box. There is also possible to “go back in time” and get historical catch reports.

Specifications Connection: RS232

Platform: Windows (XP SP3 or later)

License:

Check eSeaIndicator works as a remote control and remote display, and makes it possible to monitor the weighing and also remotely control the push buttons on the scale.

Activation by computer ID

T.A.Elektronikk AST.A.Elektronikk ASVekter - Etiketter - Etikettskrivere

T.A. Elektronikk

T.A.Elektronikk AST.A.Elektronikk ASVekter - Etiketter - EtikettskrivereGravarsveien 18, 4306 Sandnes

Tlf: 51 66 65 17Fax: 51 67 10 07

post@taelektronikk.nowww.taelektronikk.no

On the computer a visual representation of the “real-world” weight indicator is displayed. This makes the use of the software really simple. The computer indicator buttons works as if you pressed the button on the real indicator.

The computer indicator can be set to either Slave-display mode or Remote-control mode.

In Slave-display mode you can view the last weight that has been registered on the scale.

In Remote-control mode you register the weighing that should be stored by handling the Print-button from the computer.

It is easy to configure the program, you just click one button and change the settings.

Here, in the eSea Backstage window, you can also set a new haul, which later will make it possible to see the sub totals for each haul in the report.

You can also set the catch area to be displayed on the report.

It is also possible to set the species and grade, but then you need to be aware that you only can change the species and size/grade from within the program. You cannot change the species on the scale.1

From the eSea Backstage window you can click the report button to move to the report window of the program.

On this screen it is possible to choose to view the catch by each individual weighing – the Sample report, or by totals and sub totals for each haul – the Catch report.

By default the report window will show a daily report of the current day, but it is possible to set any start and stop date for the report, and thus making it possible to show, for instance, the catch last week.

1 To make it possible to change the species and the size/grade you can upgrade your Unisystem marine scale to the eSeaSystem. Then a Controller unit is added to the scale, making it possible to select species on the scale.

T.A. Elektronikk