sutphen - s3.us-west-2.amazonaws.com
TRANSCRIPT
Family OwnedSince 1890Sutphen
Apparatus Body CONSTRUCTION: Heavy duty, corrosion resistant, #304 Stainless Steel body, Huck-bolted to the frame
DOORS: ROM roll up doors in painted or brushed finish, hinged doors optional
HOSEBED: Capacity for up to 1000’ of 5” LDH
LADDERS: Can accommodate NFPA pumper or Quint compliment of ladders
TANK: Up to 500 gallons
AIR BOTTLE Capacity for (7) air bottles storedSTORAGE: in the fender wells
COMPARTMENT Up to 280 cu. ft. of useable SPACE: compartment space
pump features:
Hale or Waterous pumps available
Up to 2000 GPMSTANDARD DISCHARGES: (2) 2.5” left, (1) 2.5” right, (1) 3” right, (1) 2.5” crosslay, (2) 2” crosslayPLATFORM EQUIPMENT: Twin monitors mounted outboard, up high; allow the front of the platform to remain open allowing better access to the face of the platform for rescue or ventilation. Manual or remote monitors are available.
Aerial/Platform Features: • Mid-mount design allows for a lower center of gravity, resulting in a more stable and better handling apparatus.• Huck-bolted, 4-sided box design boom provides superior strength and rigidity, and results in a 3:1 safety factor.• The Sutphen waterway, electrical cables, and breathing air hoses are completely enclosed inside the box boom, providing excellent protection for those systems.
• The Sutphen aerial tower may be rested against a roof cornice or building, if necessary, without causing costly repairs to the waterway unlike most other designs.• Aerial is constructed of #6061-T6 aluminum that will withstand extreme climate and intense heat situations. The aerial is left unpainted for ease of maintenance and lower repair cost.• All Sutphen aerial apparatus are rated for 50 MPH winds; a direct testament to the box boom’s strength.• The aerial device is rated with a 1000# tip load when dry, and 500# wet.• Fastest set-up time in the industry. Only one out and down jack each side. All control stations are located within 12 feet of each other. After setting the parking brake at the scene, the Sutphen platform can be deployed in 40 seconds or less.• Sutphen aerials have full capability for over the cab operation.• Low, open hose bed for easy deployment and loading of hose.
Shown with Optional Equipment
The Sutphen original mid-mount aerial platform design provides unsurpassed safety, performance, reliability, and maneuverability. The mid-mount design allows for lower center of gravity and low profile. The need for only one out and down stabilizing jack on each side provides the industry’s quickest and most compact set up.
SP 95/SP 100 Aerial Platform
SUTPHEN CORPORATION P.O. Box 0158, Amlin, OH 43002
Tel: 614.889.1005 • Toll Free: 800.848.5860 • Fax: 614.889.0874 Web: www.sutphen.com • E-mail: [email protected] SP 95/SP 100 Aerial Platform 2012
Sutphen SP 95/SP 100 Aerial Platform
LEFT SIDEDOOR OPENINGS
COMP’T HEIGHT WIDTHL1 31 19¾L2 45 16½
L3 & L4 16 52½L5 45 32 L6 45 39
LEFT SIDECOMP’T DIMENSIONS
HEIGHT WIDTH DEPTH34 26 26½48½ 22 26½19 57¾ 26½48½ 37¾ 26½48½ 45¾ 26½
RIGHT SIDEDOOR OPENINGS
COMP’T HEIGHT WIDTHR1 31 36¾R2 45½ 16½R5 24¾ 32 R6 24¾ 39
RIGHT SIDECOMP’T DIMENSIONS
HEIGHT WIDTH DEPTH34 42½ 26½48½ 22 26½28 37¾ 26½28 45¾ 26½
REAR COMPARTMENTDOOR OPENINGS
COMP’T HEIGHT WIDTHA1 15¾ 27
REAR COMPARTMENTCOMP’T DIMENSIONS
HEIGHT WIDTH DEPTH14¼ 25½ 88¾