supplement to iso focus+ · pdf filefrom 1 to 29 february 2012 committee drafts ... supplement...

ISO Update

Supplement to ISO Focus+

March 2012

People and places

ISO Members 2

International Standards in processfrom 1 to 29 February 2012

Committee Drafts (CD) registered 3

Draft International Standards (DIS) circulated 5

Final draft International Standards (FDIS) circulated 8

Standards published 11

Standards confirmed 14

Standards withdrawn 14

Meeting calendar 15

People and places

2 ISO Update, Supplement to ISO Focus+– March 2012

ISO Members

Since the February 2012 issue of ISO Update Supplement to ISO Focus+, the following changes affecting ISO members have occurred:

Membership changes

Correspondent members

The membership status of the Eritrean Standards Institution (ESI) has been upgraded from subscriber member to correspondent member with retroactive effect as from 1 January 2012. Their contact details read as follows:

ERITREA (ESI)

Eritrean Standards Institution ASMARA

Postal address:

171-1 House No. 9 P.O. Box 245 ASMARA

General Manager: Mr. Beyene Mesghenna

Tel. +291 1 12 20 05 Fax +291 1 12 02 45 E-mail [email protected]

The standards body for Niger has been re-admitted, as a correspondent member, with retroactive effect as of 1 January 2012. Their contact details read as follows:

NIGER (DNPQM)

Direction de la Normalisation, de la Promotion de la Qualité et de la Métrologie 3ème étage Immeuble ex-BDRN BP : 11700 NIAMEY

Directeur: M. Issa Boubacar

Tel. +227 20 73 69 50 Fax +227 20 73 27 59 E-mail [email protected]

New CEOs :

Member bodies

EGYPT (EOS)

Acting Chairman: Dr. Hassan Abd El-Magied

JORDAN (JSMO)

Director General: Dr. Haydar Al-Zeben

PANAMA (COPANIT)

Chief Executive Officer: (Vacant)

Address change

Member bodies

GHANA (GSA)

Ghana Standards Authority Near Tetteh Quarshie Interchange ACCRA

Postal address:

P.O.BOX MB 245 ACCRA

Tel. +233 30 25 00 65 Fax +233 30 25 00 092 E-mail [email protected] Web www.gsa.gov.gh

SINGAPORE (SPRING SG)

E-mail [email protected]

ISO Update, Supplement to ISO Focus -- March 2012 3

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 February to 29 February 2012

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 6 Paper, board and pulps

ISO/CD 14778 Paper and board — Determination of contact angle

TC 8 Ships and marine technology

ISO/CD 14886 Ships and marine technology - Large Yachts - Structural fire protection for FRP yachts

ISO/CD 16556 Large Yachts — Deck equipment — Anchoring equipments

TC 17 Steel

ISO/CD 13933 Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emisson spectrometric method

ISO/CD 19272 Alloyed steel — Determination of fifteen ele-ments — Glow discharge optical emission spectrometry

ISO/CD 683-17 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels

TC 20 Aircraft and space vehicles

ISO/CD 16290 Definition of the Technology Readiness Levels (TRL) and their criteria of assessment

TC 22 Road vehicles

ISO/DTR 12353-3

Road vehicles — Traffic accident analysis — Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity

ISO/CD 12617 Liquefied natural gas vehicles — Connector for reflueling vehicles

TC 28 Petroleum products and lubricants

ISO/CD 8311 Refrigerated light hydrocarbon fluids — Cali-bration of membrane tanks and independ-ent prismatic tanks in ships — Physical measurement

TC 29 Small tools

ISO/CD 1711-1 Assembly tools for screws and nuts — Techni-cal specifications — Part 1: Hand-operated wrenches and sockets

ISO/CD 1711-2 Assembly tools for screws and nuts — Techni-cal specifications — Part 2: Machine-operated sockets ("impact")

TC 34 Food products

ISO/CD 3657 Animal and vegetable fats and oils — Determi-nation of saponification value

ISO/DTS 21569-2

Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Qualitative nucleic acid based methods — Part 2: Construct-specific real-time PCR method for detection of a genetic modification in linseed and linseed products

TC 35 Paints and varnishes

ISO/CD 16926 Paints and varnishes — Natural weathering of coatings — Determination of corrosion protec-tion performance

TC 43 Acoustics

ISO/CD 12913-1

Acoustics — Soundscape — Part 1: Definition and conceptual framework

TC 44 Welding and allied processes

ISO/CD 9453 Soft solder alloys — Chemical compositions and forms

TC 45 Rubber and rubber products

ISO/CD 1629 Rubber and latices — Nomenclature

ISO/DTR 16098

Reclaimed rubbers and reclaimed crumb rubbers — Evaluation of dispersion in rubber mixes

ISO/CD 5999 Flexible cellular polymeric materials — Polyu-rethane foam for load-bearing applications excluding carpet underlay — Specification

TC 46 Information and documentation

ISO/DTR 18128

Information and documentation — Risk identifi-cation and assessment for records systems

TC 94 Personal safety -- Protective clothing and equipment

ISO/CD 11613-4

Protective clothing for firefighters — Laboratory test methods and performance requirements — Part 4: Gloves

ISO/DTS 16975-2

Respiratory protective devices — Part 2: Guid-ance for selection, use and maintenance

TC 96 Cranes

ISO/CD 17096 Cranes — Safety — Load lifting attachments

TC 121 Anaesthetic and respiratory equipment

ISO/CD 8836 Suction catheters for use in the respiratory tract

ISO/CD 17256 Anaesthetic and respiratory equipment — Res-piratory therapy tubing and connectors

TC 126 Tobacco and tobacco products

ISO/CD 3550-3 Cigarettes — Determination of loss of tobacco from the ends — Part 3: Method using a vibro-bench

TC 131 Fluid power systems

ISO/CD 11943 Hydraulic fluid power — On-line automatic particle-counting systems for liquids — Meth-ods of calibration and validation

ISO/DTR 16386

Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards

4 ISO Update, Supplement to ISO Focus -- March 2012

ISO/CD 18413 Hydraulic fluid power — Cleanliness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting

TC 146 Air quality

ISO/CD 16000-27

Indoor air — Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)

TC 147 Water quality

ISO/CD 16780 Water Quality — Determination of polychlorin-ated naphthalenes (PCN) — Method using gas chromatography (GC) and mass spectrometry (MS)

ISO/CD 13165-2

Water quality — Radium 226 — Part 2: Test method using emanometry

ISO/CD 5667-6 Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams

ISO/CD 5667-14

Water quality — Sampling — Part 14: Guidance on quality assurance of environmental water sampling and handling

TC 149 Cycles

ISO/CD 4210-1 Cycles — Safety requirements for bicycles — Part 1: Terms and definitions

ISO/CD 4210-2 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles

ISO/CD 4210-3 Cycles — Safety requirements for bicycles — Part 3: Common test methods

ISO/CD 4210-4 Cycles — Safety requirements for bicycles — Part 4: Braking test methods

ISO/CD 4210-5 Cycles — Safety requirements for bicycles — Part 5: Steering test methods

ISO/CD 4210-6 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods

ISO/CD 4210-7 Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods

ISO/CD 4210-8 Cycles — Safety requirements for bicycles — Part 8: Pedals and crank test methods

ISO/CD 4210-9 Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods

ISO/CD 6742-3 Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of devices

ISO/CD 6742-4 Cycles — Lighting and retro-reflective devices — Part 4: Lighting powered by cycle movement

ISO/CD 6742-5 Cycles — Lighting and retro-reflective devices — Part 5: Lighting not powered by cycle movement

TC 150 Implants for surgery

ISO/CD 16376 Implants for surgery — Evaluation method of endurance performance of metallic artificial hip stem using numerical simulation with finite element analysis

TC 156 Corrosion of metals and alloys

ISO/CD 17093 Corrosion of Metals and Alloys — Guidelines for corrosion test by electrochemical noise measurements

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO/CD 23551-5

Safety and control devices for gas burners and gas-burning appliances — Particular require-ments — Part 5: Manual gas valves

TC 165 Timber structures

ISO/CD 12122-1

Timber structures — Determination of Charac-teristic values — Part 1: Basic requirements

ISO/CD 12122-2

Timber structures — Determination of Char-acteristic values — Part 2: Requirements for Sawn timber

TC 173 Assistive products for persons with disability

ISO 7176-19:2008/CD Amd 1

Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles — Amendment 1: .

TC 178 Lifts, escalators and moving walks

ISO/DTS 22201-3

Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Maintenance repair and retrofit activities (PESSRAL & PESSRAE)

TC 181 Safety of toys

ISO 8124-1:2009/CD Amd 4

Safety of toys — Part 1: Safety aspects related to mechanical and physical proper-ties — Amendment 4: Projectiles, rotors and propellers

TC 188 Small craft

ISO/CD 16315 Small craft — Electric propulsion systems

TC 193 Natural gas

ISO/DTR 16922

Natural gas — Odorization

ISO/CD 16960 Natural gas — Determination of sulfur com-pounds — Determination of total sulfur by oxidative microcoulometry method

TC 204 Intelligent transport systems

ISO/DTS 18234-8

Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 8: Congestion and travel-time applica-tion (TPEG1-CTT)

TC 207 Environmental management

ISO/CD 14046 Life cycle assessment — Water footprint — Requirements and guidelines

TC 223 Societal security

ISO/CD 22397 Societal security — Public Private Partnership — Guidelines to set up partnership agreements

TC 229 Nanotechnologies

ISO/DTS 14101

Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method

ISO/DTS 16195

Nanotechnologies - Generic requirements for reference materials for development of meth-ods for characteristic testing, performance testing and safety testing of nanoparticle and nanofibre powders

ISO/DTS 17200

Nanotechnology — Nanoparticles in powder form — Characteristics and measurements

JTC 1 Information technology

ISO/IEC PDTR 20000-5

Information technology — Service manage-ment — Part 5: Exemplar implementation plan for ISO/IEC 20000-1

ISO/IEC PDTR 20000-10

Information technology — Service manage-ment — Part 10: Concepts and terminology

ISO/IEC PDTR 30103

Title missing

ISO/IEC PDTR 30126

Software engineering — Lifecycle profiles for Very Small Entities (VSEs)

ISO/IEC CD 90006

Information Technology — Guidelines for the application of ISO 9001:2000 to IT service management.

ISO 9660:1988/PDAM 1

Information processing — Volume and file structure of CD-ROM for information inter-change — Amendment 1


ISO/IEC 19775-2:2004/PDAM 1

Information technology — Computer graph-ics and image processing — Extensible 3D (X3D) — Part 2: Scene Access Interface (SAI) — Amendment 1

ISO/IEC CD 27033-5

Information technology — Security tech-niques — Network security — Part 5: Securing communications across networks using Virtual Private Network (VPNs)

ISO/IEC CD 11160-2

Information technology — Office equipment — Minimum information to be included in specification sheets — Printers — Part 2: Class 3 and Class 4 printers

ISO/IEC CD 11179-5

Information technology — Metadata registries (MDR) — Part 5: Naming and identification principles

ISO/IEC CD 19763-10

Information technology — Metamodel frame-work for interoperability (MFI) — Part 10: MFI Core model and basic mapping

ISO/IEC CD 19763-12

Information technology — Metamodel frame-work for interoperability (MFI) — Part 12: Metamodel for information model registration

ISO/IEC 19794-5:2011/PDAM 1

Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 1: Conformance testing methodology

ISO/IEC 19794-8:2011/PDAM 1

Information technology — Biometric data interchange formats — Part 8: Finger pattern skeletal data — Amendment 1: Conformance testing methodology

ISO/IEC PDTR 29198

Boimetrics - Characterization and measure-ment of difficulty for fingerprint databases for tehcnology evaluation

ISO/IEC CD 29794-6

Biometric Sample Quality Standard — Part 6: Iris Image

ISO/IEC CD 30106-3

Information Technology — Object orientated BioAPI — Part 3: Orientation

ISO/IEC CD 30108

Biometric identity assurance service (BIAS)

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 2 Fasteners

ISO/DIS 14581 * Fasteners — Hexalobular socket countersunk flat head screws 2012-07-03

ISO/DIS 14582 * Hexalobular socket countersunk head screws, high head 2012-07-03

ISO/DIS 1891-2

* Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings

2012-08-10


ISO/DIS 8791-2

* Paper and board — Determina-tion of roughness/smoothness (air leak methods) — Part 2: Bendtsen method

2012-07-04

(Revision of ISO 8791-2:1990)


ISO/DIS 13073-2

* Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 2: Marine environmental risk as-sessment method for anti-fouling systems on ships using biocid-ally active substances

2012-07-25

TC 17 Steel

ISO/DIS 7452.2

* Hot-rolled steel plates — Toler-ances on dimensions and shape 2012-04-08

(Revision of ISO 7452:2002)

ISO/DIS 16160 * Hot-rolled steel sheet prod-ucts — Dimensional and shape tolerances

2012-07-08


ISO/DIS 404 Steel and steel products — General technical delivery requirements

2012-07-15


ISO/DIS 10474 Metallic products — Inspection documents 2012-07-15



ISO/DIS 11233 Space Systems — Orbit determi-nation and estimation — Process for describing techniques

2012-07-28

TC 21 Equipment for fire protec-tion and fire fighting

ISO/DIS 7240-14

* Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm sys-tems in and around buildings

2012-07-04

(Revision of ISO/TR 7240-14:2003)

TC 22 Road vehicles

ISO/DIS 6623 * Internal combustion engines — Piston rings — Scraper rings made of cast iron

2012-07-16


ISO/DIS 6626-2

* Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron

2012-07-22


ISO/DIS 8820-2

Road vehicles — Fuse-links — Part 2: User's guide 2012-07-28


ISO/DIS 11992-4

* Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostic communication

2012-07-22

(Revision of ISO 11992-4:2005, ISO 11992-4:2005/Cor 1:2006)

ISO/DIS 18541-1.2

* Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition

2012-04-13


ISO/DIS 22241-5.2

* Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars

2012-04-16

ISO/DIS 13044-2

Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface

2012-07-29

TC 23 Tractors and machinery for agriculture and forestry

ISO/DIS 13693-1

Irrigation equipment — Safety devices for chemigation — Part 1: Small plastics valves for chemigation

2012-07-24

TC 24 Particle characterization including sieving

ISO/DIS 26824 * Particle characterization of par-ticulate systems — Vocabulary 2012-07-07

TC 29 Small toolsISO/DIS 1832 * Indexable inserts for cutting

tools — Designation 2012-07-03


ISO/DIS 5609-1

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 1: Designa-tion, styles, dimensions and calculation for corrections

2012-07-03

(Revision of ISO 5609:1998, ISO 6261:2011)

ISO/DIS 5609-2

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 2: Style F

2012-07-03


ISO/DIS 5609-3

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 3: Style K

2012-07-03


ISO/DIS 5609-4

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 4: Style L

2012-07-03


ISO/DIS 5609-5

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 5: Style U

2012-07-03


ISO/DIS 5609-6

* Tool holders for internal turning with cylindrical shank for index-able inserts — Part 6: Style Q

2012-07-03


TC 34 Food productsISO/DIS 4833-1

* Microbiology of food and animal feed — Horizontal method for the enumeration of microorgan-isms — Part 1: Colony count at 30 degrees C by the pour plate technique

2012-07-24


ISO/DIS 4833-2

* Microbiology of food and animal feed — Horizontal method for the enumeration of microorgan-isms — Part 2: Colony count at 30 degrees C by the surface plating technique

2012-07-24

ISO 21569:2005/DAmd 1

* Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Qualita-tive nucleic acid based methods — Amendment 1

2012-07-10

TC 35 Paints and varnishes

ISO/DIS 16474-1

* Paints and varnishes — Meth-ods of exposure to laboratory light sources — Part 1: General guidance

2012-07-17


ISO/DIS 16474-2

* Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

2012-07-17


ISO/DIS 16474-3

* Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

2012-07-17


ISO/DIS 16474-4

* Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Carbon-arc lamps

2012-07-17

TC 39 Machine tools

ISO/DIS 10791-1

* Test conditions for machining centres — Part 1: Geometric tests for machines with horizon-tal spindle (horizontal Z-axis)

2012-07-15


ISO/DIS 10791-6

* Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations

2012-07-24

(Revision of ISO 10791-6:1998, ISO 10791-6:1998/Cor 1:2004)

ISO/DIS 10791-7

* Test conditions for machining centres — Part 7: Accuracy of a finished test piece

2012-07-15



ISO/DIS 1432.2

* Rubber, vulcanized or thermo-plastic — Determination of low-temperature stiffening (Gehman test)

2012-04-29

(Revision of ISO 1432:1988, ISO 1432:1988/Cor 1:2003)

ISO/DIS 3303-1

Rubber- or plastics-coated fab-rics — Determination of bursting strength — Part 1: Steel-ball method

2012-05-09


ISO/DIS 3303-2

Rubber- or plastics-coated fab-rics — Determination of bursting strength — Part 2: Hydraulic method

2012-05-09


TC 58 Gas cylinders

ISO/DIS 12209 * Gas cylinders — Outlet connec-tions for gas cylinder valves for compressed breathable air

2012-07-24

(Revision of ISO 12209-1:2000, ISO 12209-2:2000, ISO 12209-3:2000)

TC 59 Buildings and civil engi-neering works

ISO/DIS 16354 Guidelines for Knowledge Librar-ies and Object Libraries 2012-07-29

TC 61 Plastics

ISO 899-1:2003/DAmd 1

* Plastics — Determination of creep behaviour — Part 1: Ten-sile creep — Amendment 1

2012-07-10


ISO 899-2:2003/DAmd 1

* Plastics — Determination of creep behaviour — Part 2: Flex-ural creep by three-point loading — Amendment 1

2012-07-10

ISO/DIS 11357-5

* Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

2012-07-17


ISO/DIS 4892-2.2

* Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

2012-04-10

(Revision of ISO 4892-2:2006, ISO 4892-2:2006/Amd 1:2009)

TC 68 Financial services

ISO/DIS 1004-1

* Information processing — Mag-netic ink character recognition — Part 1: Print specifications for E13B

2012-07-02


ISO/DIS 1004-2

* Information processing — Mag-netic ink character recognition — Part 2: Print specifications for CMC7

2012-07-02

TC 69 Applications of statistical methods

ISO/DIS 3951-1

* Sampling procedures for inspec-tion by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

2012-07-15


ISO/DIS 3951-2

* Sampling procedures for inspec-tion by variables — Part 2: General specification for single sampling plans indexed by ac-ceptance quality limit (AQL) for lot-by-lot inspection of inde-pendent quality characteristics

2012-07-15


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/DIS 1920-11

* Testing of concrete — Part 11: Determination of the chloride resistance of concrete, unidirec-tional diffusion

2012-07-30

ISO/DIS 1920-12

* Testing of concrete — Part 12: Determination of the carbonation resistance of concrete — Accel-erated carbonation method

2012-07-30

TC 79 Light metals and their alloys

ISO/DIS 7583 Anodizing of aluminium and its alloys — Terms and definitions 2012-07-28


TC 83 Sports and recreational equipment

ISO/DIS 20957-1

* Stationary training equipment — Part 1: General safety require-ments and test methods

2012-07-10


TC 108 Mechanical vibration, shock and condition monitoring

ISO/DIS 20958-1

* Condition monitoring and diag-nostics of machines — Electrical signature analysis — Part 1: Three-phase induction motors

2012-07-04


ISO/DIS 5367 * Anaesthetic and respiratory equipment — Breathing sets and connectors

2012-07-24


ISO/DIS 10079-2

* Medical suction equipment — Part 2: Manually powered suc-tion equipment

2012-07-24


TC 127 Earth-moving machinery

ISO/DIS 7130 * Earth-moving machinery — Guide to procedure for operator training

2012-07-04


ISO/DIS 6747 * Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications

2012-07-02

(Revision of ISO 6747:1998, ISO 6747:1998/Amd 1:2003)

TC 135 Non-destructive testing

ISO/DIS 5579 * Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules

2012-07-03


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 18225 * Plastics piping systems — Multi-layer piping systems for outdoor gas installations — Specifica-tions for systems

2012-07-15



ISO/DIS 16087 * Implants for surgery - Roent-gen stereophotogrammetry for assessment of micromotion of orthopaedic implants

2012-07-04


ISO/DIS 15158 * Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiokinetic control in sodium chloride solution

2012-07-24

TC 171 Document management applications

ISO/DIS 14739-1.2

Document management — 3D use of Product Representation Compact (PRC) format — Part 1: PRC 10001

2012-04-30

TC 172 Optics and photonics

ISO/DIS 8039.2

* Microscopes — Values, toleranc-es and symbols for magnification 2012-04-04


TC 173 Assistive products for per-sons with disability

ISO/DIS 7176-25

* Wheelchairs — Part 25: Batter-ies and chargers for powered wheelchairs - Requirements and test methods

2012-07-04


TC 184 Automation systems and integration

IEC/DIS 62264-1

Enterprise-control system integration — Part 1: Models and terminology

2012-07-18

(Revision of IEC 62264-1:2003)

IEC/DIS 62264-2

Enterprise-control system inte-gration — Part 2: Object model attributes

2012-07-18

(Revision of IEC 62264-2:2004)

TC 193 Natural gasISO/DIS 13734 * Natural gas — Organic com-

ponents used as odorants — Re-quirements and test methods

2012-07-24

(Revision of ISO 13734:1998, ISO 13734:1998/Cor 1:1999)


ISO/DIS 15623 * Intelligent Transport Systems — Forward vehicle collision warning systems — Performance require-ments and test procedures

2012-07-24


TC 213 Dimensional and geometri-cal product specifications and verification

ISO/DIS 2538-1

* Geometrical product specifica-tions (GPS) — Wedges — Part 1: Series of angles and slopes

2012-07-17


ISO/DIS 2538-2

* Geometrical product specifica-tions (GPS) — Wedges — Part 2: Dimensioning and tolerancing

2012-07-17


ISO 14253-1:1998/DAmd 1

* Geometrical Product Specifica-tions (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving con-formance or non-conformance with specifications — Amend-ment 1

2012-07-03

TC 227 SpringsISO/DIS 16249 Springs — Symbols

2012-07-29

JTC 1 Information technologyISO/IEC DIS 15504-6

Information technology — Pro-cess assessment — Part 6: An exemplar system life cycle process assessment model

2012-07-25

(Revision of ISO/IEC TR 15504-6:2008, ISO/IEC TR 15504-6:2008/DAM 1)

ISO/IEC DIS 20000-3

* Information technology — Ser-vice management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1

2012-05-04

(Revision of ISO/IEC TR 20000-3:2009)

ISO/IEC DIS 14776-261

Information technology — Small Computer System Interface (SCSI) — Part 261: SAS Protocol Layer (SPL)

2012-07-04

ISO/IEC DIS 18046-3

* Information technology — Radio frequency identification device performance test methods — Part 3: Test methods for tag performance

2012-05-04

(Revision of ISO/IEC 18046-3:2007)

ISO/IEC DIS 18047-6

* Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz

2012-05-04

(Revision of ISO/IEC TR 18047-6:2011)


Information technology — Real-time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

2012-07-21


Information technology — Real-time locating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface

2012-07-21

ISO/IEC DIS 24769-5

Information technology — Real-time locating system (RTLS) device conformance test meth-ods — Part 5: : Test methods for Chirp spread spectrum (CSS) air interface communication at 2,4 GHz

2012-07-21

ISO/IEC DIS 24770

Information technology — Real-time locating system (RTLS) de-vice performance test methods — Test methods for air interface communication at 2,4 GHz

2012-07-21

(Revision of ISO/IEC TR 24770:2008)

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 4 Rolling bearings

ISO 10285:2007/FDAmd 1

* Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances — Amendment 1

2012-04-29


ISO/FDIS 1974 * Paper — Determination of tear-ing resistance — Elmendorf method

2012-04-10


TC 10 Technical product documentation

ISO/FDIS 6433 * Technical product documenta-tion — Part references 2012-04-10


TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 7240-10

* Fire detection and alarm systems — Part 10: Point-type flame detectors

2012-04-21



ISO/FDIS 7076-1

* Fire protection - Foam fire extinguishing systems — Part 1: Foam proportioning equipment

2012-04-28

ISO/FDIS 7076-2

* Fire protection - Foam fire extin-guishing systems — Part 2: Low expansion foam equipment

2012-04-28

TC 22 Road vehicles

ISO/FDIS 11446-2

* Road vehicles — Connectors for the electrical connection of tow-ing and towed vehicles — Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords

2012-04-08


TC 34 Food products

ISO/FDIS 15163

* Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatog-raphy of chymosin and bovine pepsin contents

2012-04-02

TC 41 Pulleys and belts (including veebelts)

ISO/FDIS 5296 * Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions

2012-04-11

(Revision of ISO 5296-1:1989, ISO 5296-2:1989)

TC 42 Photography

ISO/FDIS 18933

* Imaging materials — Magnetic tape — Care and handling prac-tices for extended usage

2012-04-29


TC 44 Welding and allied processes

ISO/FDIS 13585

* Brazing — Qualification test of brazers and brazing operators 2012-04-24

ISO/FDIS 22825

* Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

2012-04-03


ISO/FDIS 9606-1

* Qualification testing of weld-ers — Fusion welding — Part 1: Steels

2012-04-25


TC 46 Information and documentation

ISO/FDIS 27730.2

* Information and documentation — International standard collec-tion identifier (ISCI)

2012-04-04

TC 61 Plastics

ISO/FDIS 9352 * Plastics — Determination of resistance to wear by abrasive wheels

2012-04-04


TC 92 Fire safety

ISO/FDIS 14934-3

* Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

2012-04-28


TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 4007 * Personal protective equip-ment — Eye and face protection — Vocabulary

2012-04-10


TC 115 Pumps

ISO/FDIS 17769-1

* Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps

2012-04-10


ISO/FDIS 17769-2

* Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system

2012-04-10


ISO/FDIS 12846

* Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment

2012-04-03



ISO/FDIS 11658

* Cardiovascular implants and ex-tracorporeal systems — Blood/tissue contact surface modifica-tions for extracorporeal perfusion systems

2012-04-24


ISO/FDIS 9227 * Corrosion tests in artificial at-mospheres — Salt spray tests 2012-04-10


TC 190 Soil quality

ISO/FDIS 10930

* Soil quality — Measurement of the stability of soil aggregates subjected to the action of water

2012-04-11

TC 193 Natural gas

ISO/FDIS 6974-1

* Natural gas — Determination of composition and associated un-certainty by gas chromatography — Part 1: General guidelines and calculation of composition

2012-04-17


ISO/FDIS 6974-2

* Natural gas — Determination of composition and associated uncertainty by gas chromatog-raphy — Part 2: Uncertainty calculations

2012-04-17



ISO/FDIS 14045

* Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines

2012-04-03

TC 210 Quality management and corresponding general as-pects for medical devices

ISO/FDIS 15223-1

* Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements

2012-04-24


TC 215 Health informatics

ISO/FDIS 11238

* Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and exchange of regulated informa-tion on substances

2012-04-24


ISO/FDIS 11239

* Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and ex-change of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging

2012-04-24

ISO/FDIS 11240

* Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and ex-change of units of measurement

2012-04-24

ISO/FDIS 11615

* Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and exchange of regulated medicinal product information

2012-04-24

ISO/FDIS 11616

* Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and exchange of regulated pharma-ceutical product information

2012-04-24

TC 217 Cosmetics

ISO/FDIS 24443

* Determination of sunscreen UVA photoprotection in vitro 2012-04-24


ISO/FDIS 22300

* Societal security — Terminology2012-04-02

ISO/FDIS 22301

* Societal security — Business continuity management systems --- Requirements

2012-04-02


ISO/IEC FDIS 10646

* Information technology — Uni-versal Coded Character Set (UCS)

2012-04-14

(Revision of ISO/IEC 10646:2011)

ISO/IEC 10373-6:2011/FDAmd 3

* Identification cards — Test meth-ods — Part 6: Proximity cards — Amendment 3: Exchange of additional parameters, block numbering, unmatched AFI and TR2

2012-03-31

ISO/IEC 14443-4:2008/FDAmd 2

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 2: Bit rates of fc/8, fc/4 and fc/2, protocol activation of PICC Type A and frame size from 512 bytes to 4 096 bytes

2012-04-17

ISO/IEC FDIS 30170

* Information technology — Pro-gramming languages — Ruby 2012-04-01

ISO/IEC 18023-1:2006/FDAmd 1

* Information technology — SE-DRIS — Part 1: Functional speci-fication — Amendment 1

2012-04-16

ISO/IEC 18023-3:2006/FDAmd 1

* Information technology — SE-DRIS — Part 3: Transmittal for-mat binary encoding — Amend-ment 1

2012-04-16

ISO/IEC 18024-4:2006/FDAmd 1

* Information technology — SE-DRIS language bindings — Part 4: C — Amendment 1

2012-04-16

ISO/IEC 14888-3:2006/FDAmd 2

* Information technology — Se-curity techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms — Amendment 2: Optimizing hash inputs

2012-04-14

ISO/IEC FDIS 27033-2

* Information technology — Se-curity techniques — Network security — Part 2: Guidelines for the design and implementation of network security

2012-04-17

(Revision of ISO/IEC 18028-2:2006)


* Information technology — Se-curity techniques — Lightweight cryptography — Part 3: Stream ciphers

2012-04-17

ISO/IEC 14496-12:2008/FDAmd 2

* Information technology — Cod-ing of audio-visual objects — Part 12: ISO base media file format — Amendment 2

2012-04-24

ISO/IEC 15444-12:2008/FDAmd 2

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 2

2012-04-24

ISO/IEC 15938-9:2005/FDAmd 1

* Information technology — Mul-timedia content description inter-face — Part 9: Profiles and levels — Amendment 1: Extensions to profiles and levels

2012-04-24


* Information technology — Meta-data Registries Interoperability and Bindings (MDR-IB) — Part 1: Framework, common vocabu-lary, and common provisions for conformance

2012-04-10


* Information technology — Meta-data Registries Interoperability and Bindings (MDR-IB) — Part 2: Coding bindings

2012-04-10


* Information technology — Meta-data Registries Interoperability and Bindings (MDR-IB) — Part 3: API bindings

2012-04-10


* Information technology — Meta-data Registries Interoperability and Bindings (MDR-IB) — Part 4: Protocol bindings

2012-04-10


* Information technology — Meta-data Registries Interoperability and Bindings (MDR-IB) — Part 5: Profiles

2012-04-10

ISO/IEC FDIS 9541-1

* Information technology — Font information interchange — Part 1: Architecture

2012-04-01

(Revision of ISO/IEC 9541-1:1991, ISO/IEC 9541-1:1991/Cor 1:1992, ISO/IEC 9541-1:1991/Cor 2:1994, ISO/IEC 9541-1:1991/Amd 1:2001, ISO/IEC 9541-1:1991/Amd 2:1998, ISO/IEC 9541-1:1991/Cor 3:1995, ISO/IEC 9541-1:1991/Amd 3:2000, ISO/IEC 9541-1:1991/Amd 4:2009)

ISO/IEC FDIS 9541-2

* Information technology — Font information interchange — Part 2: Interchange format

2012-04-01

(Revision of ISO/IEC 9541-2:1991, ISO/IEC 9541-2:1991/Cor 1:1993, ISO/IEC 9541-2:1991/Cor 2:1995, ISO/IEC 9541-2:1991/Amd 1:2000, ISO/IEC 9541-2:1991/Amd 2:2009)


ISO/IEC FDIS 9541-3

* Information technology — Font information interchange — Part 3: Glyph shape representation

2012-04-01

(Revision of ISO/IEC 9541-3:1994, ISO/IEC 9541-3:1994/Amd 1:2005, ISO/IEC 9541-3:1994/Amd 2:2009)


* Information technology — Learn-ing, education and training — Metadata for learning resources — Part 5: Educational elements

2012-04-14

Standards published

New International Standards published between 01 February and 29 February 2012


** French version of standard previously published in English only

Price group


ISO 16363:2012

* Space data and information transfer systems — Audit and certification of trustworthy digital repositories

V

ISO 15388:2012

* Space systems — Contamination and cleanliness control K

TC 21 Equipment for fire protection and fire fighting

ISO 21927-9:2012

* Smoke and heat control systems — Part 9: Specification for control equipment

V

TC 22 Road vehicles

ISO 13207-1:2012

* Road vehicles — LED lamp charac-teristics for bulb compatible failure detection — Part 1: LED lamps used as direction indicators

C

ISO/TS 19072-3:2012

* Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 3: Pyro-technic device and harness connector assembly - type 1

D

TC 23 Tractors and machinery for agri-culture and forestry

ISO/TS 11356:2011

Crop protection equipment — Trace-ability — Spray parameter recording J

ISO 15886-1:2012

* Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification

H

ISO 11783-2:2012

Tractors and machinery for agriculture and forestry — Serial control and com-munications data network — Part 2: Physical layer

T

TC 29 Small tools

ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions

L

ISO 3316:2012 Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests

C

TC 31 Tyres, rims and valvesISO 9413:2012 * Tyre valves — Dimensions and

designation XA

TC 35 Paints and varnishesISO 8503-1:2012

Preparation of steel substrates before application of paints and related prod-ucts — Surface roughness character-istics of blast-cleaned steel substrates — Part 1: Specifications and defini-tions for ISO surface profile compara-tors for the assessment of abrasive blast-cleaned surfaces

D

ISO 8503-2:2012

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure

B

ISO 8503-3:2012

Preparation of steel substrates before application of paints and related prod-ucts — Surface roughness character-istics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure

F

ISO 8503-4:2012

Preparation of steel substrates before application of paints and related prod-ucts — Surface roughness character-istics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure

E

TC 39 Machine toolsISO 230-1:2012

Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions

XC

TC 43 AcousticsISO 3743-1:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pres-sure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room

R

ISO/PAS 17208-1:2012

* Acoustics — Quantities and proce-dures for description and measurement of underwater sound from ships — Part 1: General requirements for measure-ments in deep water

L

TC 44 Welding and allied processesISO 14174:2012

Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification

H

ISO 15614-1:2004/Amd 2:2012

Specification and qualification of weld-ing procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 2

XZ

TC 61 PlasticsISO 527-1:2012

Plastics — Determination of tensile properties — Part 1: General principles L


ISO 527-2:2012

Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

F

ISO 1133-1:2011

Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method

M

ISO 1622-1:2012

Plastics — Polystyrene (PS) mould-ing and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 17212:2012

* Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

M

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 14224:2006

Petroleum, petrochemical and natural gas industries — Collection and ex-change of reliability and maintenance data for equipment

XC

ISO 10414-2:2011

Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids

XC

ISO 13628-4:2010

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment

XC

ISO 19901-3:2010

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure

XA


ISO 7870-3:2012

* Control charts — Part 3: Acceptance control charts K

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 13315-1:2012

* Environmental management for con-crete and concrete structures — Part 1: General principles

G

TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use

ISO 1135-4:2012

* Transfusion equipment for medical use — Part 4: Transfusion sets for single use

H

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 2919:2012 Radiological protection — Sealed radioactive sources — General require-ments and classification

K

TC 92 Fire safety

ISO 5658-2:2006/Amd 1:2011

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in ver-tical configuration — Amendment 1

XZ

ISO 16732-1:2012

Fire safety engineering — Fire risk as-sessment — Part 1: General K

TC 96 Cranes

ISO 11660-4:2012

* Cranes — Access, guards and re-straints — Part 4: Jib cranes C

TC 106 Dentistry

ISO 9693-1:2012

Dentistry — Compatibility testing — Part 1: Metal-ceramic systems C

IEC 80601-2-60:2012

* Medical electrical equipment — Part 2-60: Particular requirements for basic safety and essential performance of dental equipment

V

TC 108 Mechanical vibration, shock and condition monitoring

ISO 13374-3:2012

* Condition monitoring and diagnostics of machines — Data processing, com-munication and presentation — Part 3: Communication

L

TC 110 Industrial trucks

ISO 22915-13:2012

Industrial trucks — Verification of sta-bility — Part 13: Rough-terrain trucks with mast

C


ISO 81060-2:2009

Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type

Q

TC 123 Plain bearings

ISO/TR 4378-6:2012

Plain bearings — Terms, definitions, classification and symbols — Part 6: Abbreviated terms

C

TC 130 Graphic technology

ISO 16684-1:2012

* Graphic technology — Extensible metadata platform (XMP) specification — Part 1: Data model, serialization and core properties

S


ISO 3601-1:2012

Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes

R

TC 145 Graphical symbols

ISO 3864-3:2012

Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs

N

TC 146 Air quality

ISO 13138:2012

Air quality — Sampling conventions for airborne particle deposition in the human respiratory system

J


ISO/TS 28581:2012

Water quality — Determination of selected non-polar substances — Method using gas chromatography with mass spectrometric detection (GC-MS)

M

ISO 8692:2012 Water quality — Fresh water algal growth inhibition test with unicellular green algae

L


ISO 7199:2009/Amd 1:2012

* Cardiovascular implants and artificial organs — Blood-gas exchangers (oxy-genators) — Amendment 1: Clarifica-tions for test methodologies, labelling, and sampling schedule

XZ

ISO 27185:2012

* Cardiac rhythm management devices — Symbols to be used with cardiac rhythm management device labels, and information to be supplied — General requirements

P


TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO 8009:2004/Amd 1:2012

* Mechanical contraceptives — Reus-able natural and silicone rubber contra-ceptive diaphragms — Requirements and tests — Amendment 1

XZ

TC 159 Ergonomics

ISO 9241-143:2012

Ergonomics of human-system interac-tion — Part 143: Forms X

TC 163 Thermal performance and en-ergy use in the built environment

ISO 10077-2:2012

* Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Nu-merical method for frames

R

TC 184 Automation systems and integration

ISO 8373:2012 * Robots and robotic devices — Vocabulary R

TC 190 Soil quality

ISO 11063:2012

Soil quality — Method to directly ex-tract DNA from soil samples L

ISO 11269-1:2012

Soil quality — Determination of the ef-fects of pollutants on soil flora — Part 1: Method for the measurement of inhibition of root growth

H

TC 198 Sterilization of health care products

ISO 20857:2010

Sterilization of health care products — Dry heat — Requirements for the development, validation and routine control of a sterilization process for medical devices

U


ISO 12855:2012

* Electronic fee collection — Information exchange between service provision and toll charging

W

ISO/TS 13140-2:2012

* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 — Part 2: Abstract test suite

H

ISO 14814:2006

Road transport and traffic telematics — Automatic vehicle and equipment identification — Reference architecture and terminology

F

ISO/TS 16401-1:2012

* Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 1: Test suite structure and test purposes

XC

ISO/TS 16401-2:2012

* Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 2: Abstract test suite

E

ISO/TS 16403-1:2012

* Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-4 — Part 1: Test suite structure and test purposes

T

ISO/TS 16403-2:2012


F

ISO/TS 16407-2:2012


F

ISO/TS 16410-2:2012


F

TC 211 Geographic information/Geomatics

ISO 19144-1:2009

Geographic information — Classifica-tion systems — Part 1: Classification system structure

P

ISO 19148:2012

* Geographic information — Linear referencing X

CASCO Committee on conformity assessment

ISO/IEC 17020:2012

Conformity assessment — Require-ments for the operation of various types of bodies performing inspection

J


ISO/IEC 14908-2:2012

* Information technology — Control net-work protocol — Part 2: Twisted pair communication

H

ISO/IEC 14908-3:2012

* Information technology — Control network protocol — Part 3: Power line channel specification

G

ISO/IEC 14908-4:2012

* Information technology — Con-trol network protocol — Part 4: IP communication

U

ISO/IEC 20000-2:2012

* Information technology — Service management — Part 2: Guidance on the application of service management systems

X

ISO/IEC 23271:2012

* Information technology — Common Language Infrastructure (CLI) XC

ISO/IEC 14543-5-3:2012

* Information technology — Home electronic system (HES) architecture — Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Basic application

H

ISO/IEC 14543-5-5:2012

* Information technology — Home electronic system (HES) architecture — Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Device type

G

ISO/IEC 14543-5-6:2012

* Information technology — Home electronic system (HES) architecture — Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Part 5-6: Service type

XC

ISO/IEC 14543-5-21:2012

* Information technology — Home electronic system (HES) architecture — Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Application profile — AV profile

T

ISO/IEC 14763-2:2012

* Information technology — Imple-mentation and operation of customer premises cabling — Part 2: Planning and installation

XB

ISO/IEC 28360:2012

* Information technology — Office equipment — Determination of chemi-cal emission rates from electronic equipment

S


Standards confirmed

The following International Standards are confimred for a five year period:


ISO 3902:1990 (reconfirmed)


TC 23 Tractors and machinery for agriculture and forestry

ISO 4254-5:2008


TC 33 Refractories

ISO 21068-1:2008

ISO 21068-2:2008

ISO 21068-3:2008

TC 34 Food products

ISO 14501:2007

TC 38 Textiles

ISO 105-A06:1995 (reconfirmed)

ISO 105-A08:2001 (reconfirmed)

ISO 105-B08:1995 (reconfirmed)

ISO 105-F01:2001 (reconfirmed)





ISO 105-Z04:1995 (reconfirmed)




TC 41 Pulleys and belts (including veebelts)




TC 58 Gas cylinders

ISO 10692-1:2001 (reconfirmed)

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries




TC 70 Internal combustion engines


TC 72 Textile machinery and accessories



TC 85 Nuclear energy, nuclear technologies, and radiological protection








ISO 6020-1:2007

ISO 13726:2008

TC 133 Sizing systems and designations for clothes


TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food

ISO 6486-1:1999

ISO 6486-2:1999

ISO 7086-1:2000

ISO 7086-2:2000

ISO 8391-1:1986

ISO 8391-2:1986

TC 219 Floor coverings






ISO 24337:2006


ISO/IEC 2382-7:2000

(reconfirmed)



Standards withdrawn



ISO 7966:1993 (replaced by ISO 7870-3:2012)

TC 92 Fire safety

ISO/TS 16732:2005

(replaced by ISO 16732-1:2012)

TC 159 Ergonomics

ISO 9241-17:1998 (replaced by ISO 9241-143:2012)


ISO/IEC 6592:2000 (replaced by ISO/IEC 26514:2008)

IEC 559:1989 (replaced by ISO/IEC/IEEE 60559:2011)

ISO/IEC TR 14763-2:2000

(replaced by ISO/IEC 14763-2:2012)


Meeting calendar

(update at 01 February 2012)

Meetings called for the month of January are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

April 2012

16 Durban (South Africa)

TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

16-17 Graz (Austria) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

16-20 La Plaine St-Denis (France)

TC 198 Sterilization of health care products

16-20 Melbourne (Australia)

** TC 204 Intelligent transport systems

16-20 Chicago (USA) TC 248 Project committee: Sustainability criteria for bioenergy

17 Senlis (France) TC 117 Fans


TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing


TC 135/SC 5 Non-destructive testing/Radiation methods

17-19 Montreal (Canada)

TC 232 Learning services for non-formal education and training

18 Milan (Italy) TC 44/SC 9 Welding and allied processes/Health and safety


TC 135/SC 2 Non-destructive test-ing/Surface methods


TC 135/SC 6 Non-destructive test-ing/Leak detection methods


TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing

18 Glasgow, Scotland (United Kingdom)

TC 161 Control and protec-tive devices for gas and/or oil burners and appliances


TC 135/SC 7 Non-destructive testing/Personnel qualification

19-20 Toulouse (France)

TC 34/SC 12 Food products/Sen-sory analysis

20 Deerfield (USA) TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters


TC 135 Non-destructive testing

23-26 Prague (Czech Republic)

TC 83/SC 5 Sports and recrea-tional equipment/Ice hockey equipment and facilities

23-26 Cape Town (South Africa)

** TC 102 Iron ore and direct reduced iron

23-27 Oslo (Norway) ** TC 59/SC 14 Buildings and civil engineering works/Design life

23-27 Winterthur (Switzerland)

TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures

25 Yokohama (Japan)

TC 4/SC 4 Rolling bearings/Tolerances, tolerance definitions and sym-bols (including GPS)

26-27 Nairobi (Kenya) TC 34 Food products

26-27 Moscow (Rus-sian Federation)

TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

26-27 Vienna (Austria) TC 159 Ergonomics

27 Yokohama (Japan)

TC 4/SC 12 Rolling bearings/Ball bearings

27 Thessalonik (Greece)

TC 92/SC 3 Fire safety/Fire threat to people and environment

27 Thessalonik (Greece)

TC 92/SC 4 Fire safety/Fire safety engineering

May 2012

1-4 Jeju (Korea, Republic of)

* TC 28 Petroleum products and lubricants

2 Jeju (Korea, Republic of)

* TC 28/SC 5 Petroleum products and lubricants/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

3 Dublin (Ireland) ** TC 242 Energy Management

6-9 Vancouver (Canada)

TC 215 Health informatics

7 Ittigen (Switzerland)

TC 113/SC 1 Hydrometry/Velocity area methods

7-10 Berlin (Germany) TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles

7-11 Berlin (Germany) ** TC 46 Information and documentation

7-11 Berlin (Germany) TC 46/SC 4 Information and documentation/Tech-nical interoperability

7-11 Berlin (Germany) * TC 46/SC 11 Information and doc-umentation/Archives/records management

7-11 Ittigen (Switzerland)

TC 113 Hydrometry


TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management


8-10 Sydney (Australia)

TC 145/SC 1 Graphical symbols/Public information symbols

9 Berlin (Germany) ** TC 44/SC 9 Welding and allied processes/Health and safety

9 Sydney (Australia)

TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours

9-10 Haifa (Israel) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

10 Berlin (Germany) TC 24/SC 8 Particle characteriza-tion including sieving/Test sieves, sieving and industrial screens

10 Chicago (USA) ** TC 68 Financial services

10 Chicago (USA) * TC 68 Financial services


TC 113/SC 6 Hydrometry/Sediment transport


TC 113/SC 8 Hydrometry/Ground water


TC 145 Graphical symbols

10 Stockholm (Sweden)

TC 238 Solid biofuels

11 Berlin (Germany) TC 24 Particle characteriza-tion including sieving

14-15 Stockholm (Sweden)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

14-15 Rio de Janeiro (Brazil)

** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

14-17 Nadi (Fiji) * COPOLCO Committee on con-sumer policy

14-18 Campos do Jordão (Brazil)

TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

14-18 Hangzhou (China)

* TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

15-16 Luzern (Switzerland)

TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort

15-16 Paris (France) TC 259 Project committee: Outsourcing

15-17 Buenos Aires (Argentina)

TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

16 Milan (Italy) * TC 136 Furniture

17 Orlando (USA) TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

18 Orlando (USA) TC 10 Technical product documentation


* JTC 1/SC 7 Information technol-ogy/Software and systems engineering

21 Mississauga (Canada)

TC 171/SC 2 Document manage-ment applications/Application issues

21-23 Shanghai (China) TC 131/SC 6 Fluid power systems/Contamination control

21-24 Daejon (Korea, Republic of)

* TC 249 Traditional chinese medicine

21-25 Berlin (Germany) ** JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

21-25 Mississauga (Canada)

TC 171 Document manage-ment applications

22 Delft (Netherlands)

** TC 195 Building construc-tion machinery and equipment


TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work

23 Tokyo (Japan) TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design

23-24 Düsseldorf (Germany)

TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

23-24 Pau (France) * TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

23-25 Mississauga (Canada)

* TC 171/SC 1 Document manage-ment applications/Quality

24 Seoul (Korea, Republic of)

TC 122/SC 4 Packaging/Packaging and Environment

24 Tokyo (Japan) ** TC 173 Assistive products for persons with disability

24 Tokyo (Japan) * TC 268/SC 1 Sustainable develop-ment in communities/Smart urban infra-structure metrics

24-25 Paris (France) * TC 17/SC 3 Steel/Steels for struc-tural purposes

24-25 Toronto (Canada) TC 171/SC 3 Document manage-ment applications/General issues


TC 44/SC 12 Welding and allied processes/Soldering materials


* TC 195 Building construc-tion machinery and equipment


** TC 228 Tourism and related services

May-June 2012

28-1 Helsinki (Finland) ** TC 35 Paints and varnishes

28-1 Helsinki (Finland) ** TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes


28-1 Helsinki (Finland) ** TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before ap-plication of paints and related products

28-1 Helsinki (Finland) ** TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures

28-1 Milan (Italy) TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

28-1 Bogota (Colombia)


31-1 Paris (France) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

31-1 London (United Kingdom)

TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems

June 2012

4-5 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables

4-7 Paris (France) * TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle

4-7 Paris (France) * TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

5-6 Paris (France) TC 265 Carbon capture and storage (CCS)

7 Berlin (Germany) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

7 Paris (France) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection

7-8 Toulouse (France)

TC 211 Geographic in-formation/Geomatics

8 Paris (France) TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

9 Berlin (Germany) TC 96 Cranes


TC 184/SC 4 Automation systems and integration/Indus-trial data

11-13 Woods Hole (USA)

TC 43/SC 3 Acoustics/Underwa-ter acoustics

11-13 Dresden (Germany)

* TC 126 Tobacco and tobacco products

11-15 Kyoto (Japan) TC 121 Anaesthetic and res-piratory equipment

11-15 Kyoto (Japan) TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines

11-15 Kyoto (Japan) TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

11-15 Stresa (Italy) TC 229 Nanotechnologies

11-15 Prague (Czech Republic)

TC 251 Project committee: Asset management



12-13 (France) ** TC 17/SC 17 Steel/Steel wire rod and wire products

13 Brugge (Belgium) * TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

13 La Plaine St-Denis (France)

TC 147/SC 3 Water quality/Radio-logical methods

13-14 Geneva (Switzerland)

* TMB Technical Manage-ment Board

14 Westminster, Colorado (USA)

** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

14-15 (Europe) ** TC 91 Surface active agents

16-22 Tokyo (Japan) ** TC 69 Applications of statis-tical methods

19-22 Vienna (Austria) * REMCO Committee on refer-ence materials

19-22 San José (Costa Rica)

* TC 71 Concrete, reinforced concrete and pre-stressed concrete


* TC 71/SC 1 Concrete, reinforced concrete and pre-stressed concrete/Test methods for concrete


* TC 71/SC 4 Concrete, reinforced concrete and pre-stressed concrete/Performance require-ments for structural concrete


* TC 71/SC 5 Concrete, reinforced concrete and pre-stressed concrete/Simplified design standard for concrete structures


* TC 71/SC 6 Concrete, reinforced concrete and pre-stressed concrete/Non-traditional rein-forcing materials for concrete structures


* TC 71/SC 8 Concrete, reinforced concrete and pre-stressed concrete/En-vironmental manage-ment for concrete and concrete structures


20 Yangzhou (China)

TC 100 Chains and chain sprockets for power transmission and conveyors

20-21 Paris (France) TC 17/SC 11 Steel/Steel castings

20-21 Milan (Italy) ** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

21-22 Paris (France) TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

22 Porto (Portugal) * TC 87 Cork

22 Kruger Park (South Africa)

TC 110/SC 4 Industrial trucks/Rough-terrain trucks

24-29 Madrid (Spain) * TC 37 Terminology and other language and content resources

24-30 Bangkok (Thailand)


25-29 Brussels (Belgium)

* TC 34/SC 9 Food products/Microbiology

25-29 Madrid (Spain) * TC 37/SC 2 Terminology and other language and content resources/Terminographical and lexicographical work-ing methods

25-29 St Paul, Min-nesota (USA)

* TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection

25-29 Buffalo (USA) TC 108 Mechanical vibration, shock and condition monitoring

25-29 Buffalo (USA) TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments

26-27 Düsseldorf (Germany)

* TC 17/SC 9 Steel/Tinplate and blackplate

26-27 Berlin (Germany) TC 153/SC 2 Valves/Valve actuator attachment

26-27 Beijing (China) TC 263 Coalbed methane (CBM)

26-29 Beijing (China) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

28 Buffalo (USA) TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems

29 Paris (France) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

29 Madison (USA) TC 149/SC 1 Cycles/Cycles and major sub-assemblies

29 Oranjewoud (Netherlands)

TC 188 Small craft

July 2012

16 Denver (USA) * TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

18 Denver (USA) ** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

19 Berlin (Germany) TC 261 Additive manufacturing

19-20 Denver (USA) ** TC 44 Welding and allied processes

20 Lancaster (USA) ** TC 43/SC 2 Acoustics/Building acoustics

21 Stockholm (Sweden)

** JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

August 2012

22-24 Berlin (Germany) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems


** JTC 1/SC 35 Information technol-ogy/User interfaces

September 2012

3-7 La Rochelle (France)

** TC 163 Thermal performance and energy use in the built environment

3-7 La Rochelle (France)

** TC 205 Building environment design

7 Zurich (Switzerland)

** TC 142 Cleaning equipment for air and other gases

8-16 Busan (Korea, Republic of)

* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

10 Milan (Italy) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers

10-11 Geneva (Switzerland)

* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

10-12 Shandong (China)

* TC 206 Fine ceramics

10-14 Nancy (France) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock


* TC 153/SC 1 Valves/Design, manu-facture, marking and testing

10-14 Helsinki (Finland) * TC 190 Soil quality

14 Beijing (China) * TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


** TC 165 Timber structures

18-20 Berlin (Germany) * TC 122 Packaging


* TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries


19-21 San Diego (USA) ** GA General Assembly

22 San Diego (USA) ** COUNCIL Council


** TC 164/SC 3 Mechanical testing of metals/Hardness testing

24-25 Ottawa (Canada) * TAG 8 Building


** TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

24-26 Sydney (Australia)

* TC 54 Essential oils


** JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

24-28 Vienna (Austria) ** TC 215 Health informatics


** TC 164/SC 2 Mechanical testing of metals/Ductility testing


** TC 164/SC 5 Mechanical testing of metals/Fatigue testing

27 Rio de Janeiro (Brazil)

** TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

28 Rio de Janeiro (Brazil)

** TC 164 Mechanical testing of metals

Milan (Italy) ** TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

Milan (Italy) ** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

Milan (Italy) ** TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

(Korea, Repub-lic of)

** TC 133 Sizing systems and designations for clothes

Cadiz (Spain) ** TC 213 Dimensional and geometrical product specifications and verification

Rotorua (New Zealand)

** TC 218 Timber

September-October 2012

30-6 Paris (France) TC 106 Dentistry

3rd Quarter 2012

Frankfurt (Germany)

** TC 184/SC 1 Automation systems and integration/Physi-cal device control

Berlin (Germany) ** TC 254 Safety of amusement rides and amusement devices

October 2012

1-2 Ottawa (Canada) * TC 34/SC 11 Food products/Animal and vegetable fats and oils

3 Ottawa (Canada) * TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

4-5 Montana-Verma-la (Switzerland)

TC 226 Materials for the production of primary aluminium

5 Berlin (Germany) * TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

6 Chicago (USA) * TC 130 Graphic technology

8-12 (USA) ** TC 154 Processes, data elements and documents in com-merce, industry and administration


* TC 199 Safety of machinery

10-11 Berlin (Germany) * TC 167 Steel and aluminium structures

10-12 Munich (Germany)

* TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

11-12 Bogota (Colombia)

* CASCO Committee on con-formity assessment

11-12 Tokyo (Japan) * TC 119 Powder metallurgy

14-18 Tokyo (Japan) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

14-19 Tokyo (Japan) TC 59 Buildings and civil engineering works

14-19 Praia do Forte (Brazil)

TC 127 Earth-moving machinery


TC 2/SC 7 Fasteners/Reference standards


* TC 6 Paper, board and pulps

15-19 Riccione (Italy) * TC 45 Rubber and rubber products

15-19 Riccione (Italy) * TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)

15-19 Riccione (Italy) ** TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

15-19 Amsterdam (Netherlands)

* TC 146 Air quality


TC 2/SC 11 Fasteners/Fasteners with metric external thread


TC 2/SC 14 Fasteners/Surface coatings

17 (Korea, Repub-lic of)

** TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

17 Berlin (Germany) * TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability

17-19 Guilin (China) * TC 202 Microbeam analysis


TC 2/SC 12 Fasteners/Fasteners with metric internal thread

18 Riccione (Italy) * TC 45/SC 2 Rubber and rubber products/Testing and analysis


18 Berlin (Germany) ** TC 83 Sports and recrea-tional equipment

18-19 (Korea, Repub-lic of)

** TC 17 Steel


TC 2 Fasteners

19 Riccione (Italy) * TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry

21-26 Sapporo (Japan) * TC 92 Fire safety

21-26 Sapporo (Japan) * TC 92/SC 1 Fire safety/Fire initia-tion and growth

21-26 Sapporo (Japan) ** TC 92/SC 2 Fire safety/Fire containment

22-26 (Japan) ** TC 181 Safety of toys


TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices


** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)


** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies


** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels


** TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


** TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


** TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications


** TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials

25-26 Tampa, Florida (USA)

** TC 112 Vacuum technology

25-27 Florida (USA) ** TC 201 Surface chemical analysis


** TC 138 Plastics pipes, fittings and valves for the transport of fluids

Messina (Italy) ** TC 8 Ships and marine technology

(USA) ** TC 36 Cinematography

(France) ** TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

Yokohama (Japan)

** TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)

October-November 2012

29-1 Saitama (Japan) TC 34/SC 17 Food products/Man-agement systems for food safety

31-7 Orlando (USA) * TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

November 2012

5 Berlin (Germany) * TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

5-8 Warsaw (Poland) * TC 98 Bases for design of structures


** JTC 1 Information technology

6-8 Tokyo (Japan) * TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

6-8 Reykjavik (Iceland)

TC 234 Fisheries and aquaculture

12 (Japan) ** TC 244 Industrial furnaces and associated pro-cessing equipment

15-16 Xian (China) * TC 227 Springs

26-27 London (United Kingdom)

* TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

26-30 Florianopolis (Brazil)

* TC 43 Acoustics

26-30 Florianopolis (Brazil)

* TC 43/SC 1 Acoustics/Noise

27-29 Washington, D.C (USA)

* TC 20 Aircraft and space vehicles


** TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation

Wiesbaden (Germany)



(USA) ** TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems

Kyoto (Japan) ** TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction

(Mexico) ** TC 229 Nanotechnologies

4th Quarter 2012

(Saudi Arabia) ** TC 211 Geographic in-formation/Geomatics

Month unknown 2012

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(Europe) ** TC 146/SC 6 Air quality/Indoor air

January 2013

(Unknown) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

February 2013

4-8 (Unknown) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

February-March 2013

25-1 (South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces

April 2013

10-11 Helsinki (Finland) ** TC 117 Fans

Paris (France) ** TC 29/SC 5 Small tools/Grinding wheels and abrasives

Shenzen (China) ** TC 130 Graphic technology

(USA) ** TC 178 Lifts, escalators and moving walks

May 2013

13-16 Chicago (USA) ** TC 195 Building construc-tion machinery and equipment

13-17 (Italy) ** TC 29 Small tools

13-17 (Italy) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

13-17 Guangzhou (China)

* TC 68 Financial services

13-17 Guangzhou (China)

* TC 68/SC 2 Financial services/Financial Services, security

27-31 Shanghai (China) * TC 4 Rolling bearings

Ottawa (Canada) ** JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

(China) ** TC 10 Technical product documentation

Paris (France) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(Unknown) ** TC 158 Analysis of gases

June 2013

Washington, D.C (USA)


2nd Quarter 2013

(Canada) ** TC 34/SC 4 Food products/Cere-als and pulses

August 2013

26-30 (South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces

September 2013


** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

(Unknown) ** TC 21 Equipment for fire protection and fire fighting

Victoria (Canada) ** TC 33 Refractories


** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions


** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details


** TC 123/SC 5 Plain bearings/Quality analysis and assurance


** TC 123/SC 6 Plain bearings/Terms and common items


** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings

Tokyo (Japan) ** TC 142 Cleaning equipment for air and other gases

October 2013

7 Istanbul (Turkey) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-11 Istanbul (Turkey) ** TC 38 Textiles

8 Istanbul (Turkey) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

9 Istanbul (Turkey) ** TC 38/SC 23 Textiles/Fibres and yarns

10 Istanbul (Turkey) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

11 Garching (Germany)

** TC 60 Gears


** TC 60/SC 1 Gears/Nomenclature and wormgearing


** TC 60/SC 2 Gears/Gear capacity calculation

supplement to iso focus+ · pdf filefrom 1 to 29 february 2012 committee drafts ... supplement...

Documents