supplement to iso focus+
TRANSCRIPT
ISO Update
Supplement to ISO Focus+
June 2013
ISO Update, Supplement to ISO Focus -- June 2013 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 271 Compliance programs
ISO/CD 18386 Compliance programs
TC 4 Rolling bearings
ISO/CD 21107 Rolling bearings and spherical plain bear-ings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary
TC 21 Equipment for fire protection and fire fighting
ISO/CD 16852 Flame arresters — Performance requirements, test methods and limits for use
ISO/CD 14520-12
Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant
ISO/CD 14520-13
Gaseous fire-extinguishing systems — Physi-cal properties and system design — Part 13: IG-100 extinguishant
ISO/CD 14520-14
Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant
ISO/CD 14520-15
Gaseous fire-extinguishing systems — Physi-cal properties and system design — Part 15: IG-541 extinguishant
TC 22 Road vehicles
ISO/CD 6519 Diesel engines — Fuel injection pumps — Ta-pers for shaft ends and hubs
ISO/CD 12103-1
Road vehicles — Test dust for filter evaluation — Part 1: Arizona test dust
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 13693-2
Irrigation equipment — Safety devices for chemigation — Part 2: Chemigation valve as-semblies from DN 75 to DN 350
TC 27 Solid mineral fuels
ISO/CD 13909-1
Hard coal and coke — Mechanical sampling — Part 1: General introduction
ISO/CD 13909-2
Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from moving streams
ISO/CD 13909-3
Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from stationary lots
ISO/CD 13909-4
Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
ISO/CD 13909-5
Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams
ISO/CD 13909-6
Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples
ISO/CD 13909-7
Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO/CD 13909-8
Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
ISO/CD 18806 Solid mineral fuels — Determination of Chlorine content
TC 34 Food products
ISO/CD 18301 Animal and vegetable fats and oils — Determi-nation of conventional mass per volume (litre weight in air) — Oscillating U-tube method
ISO/CD 18363 Animal and vegetables fats and oils — De-termination of fatty-acid-bound 3-chloro-propane-1,2-diol (3-MCPD) and 2,3-epoxi-propane-1-ol (glycidol) — Differential method using GC/MS
ISO/DTS 22003
Food safety management systems — Require-ments for bodies providing audit and certifica-tion of food safety management systems
TC 38 Textiles
ISO/CD 18080-1
Textiles — Test methods for evaluating the electrostatic propensity of fabrics- — Part 1: Test method using corona charging
ISO/CD 18080-2
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
ISO/CD 18080-3
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method using manual friction
ISO/CD 18080-4
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method using horizontal mechanical friction
TC 39 Machine tools
ISO/CD 16090-1
Machines tools — Safety — Machining centres — Part 1: Safety
TC 43 Acoustics
ISO 17497-1:2004/CD Amd 1
Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room — Amendment 1
TC 48 Laboratory equipment
ISO/CD 4797 Laboratory glassware — Boiling flasks with conical ground joints
TC 61 Plastics
ISO/CD 6721-10
Plastics — Determination of dynamic me-chanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/CD 18247 Plastics — Determination of the shear viscosity of polymer melts using screw-type rheometers
2 ISO Update, Supplement to ISO Focus -- June 2013
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 11665-11
Measurement of radioactivity in the environ-ment — Air: radon-222 — Part 11: Test method for soil gaz
TC 106 Dentistry
ISO/CD 17509 Dentistry — Torque transmitter for handpieces
ISO/CD 10650 Dentistry — Powered polymerization activators — Quartz tungsten halogen lamps and light emitting diode (LED) lamps
TC 107 Metallic and other inorganic coatings
ISO/CD 18555 Determination of thermal conductivity of ther-mal barrier coatings
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO/CD 7626-2 Vibration and shock — Experimental deter-mination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
TC 122 Packaging
ISO/CD 780 Packaging — Pictorial marking for handling of goods
TC 130 Graphic technology
ISO/CD 16763 Graphic technology — Requirements for post-press — Bound products
ISO/CD 17972-1
Graphic technology — Colour data exchange using CxF — Part 1: Relationship to CxF3
TC 131 Fluid power systems
ISO/CD 6020-2 Hydraulic fluid power — Mounting dimen-sions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
ISO/CD 6020-3 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) se-ries — Part 3: Compact series with bores from 250 mm to 500 mm
ISO/CD 12829 Hydraulic fluid power — Spin-on filters with finite lives — Method for verifying the fatigue life rating and the burst pressure rating of the pressure containing envelope
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 18851 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
TC 146 Air quality
ISO/CD 16000-20
Indoor air — Part 20: Detection and enumera-tion of moulds — Determination of total spore count
TC 147 Water quality
ISO/CD 18635 Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
TC 150 Implants for surgery
ISO/CD 13356 Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
TC 154 Processes, data elements and docu-ments in commerce, industry and administration
ISO/CD 15000-5
Electronic Business Extensible Markup Language (ebXML) — Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
TC 164 Mechanical testing of metals
ISO/CD 18338 Metallic materials — Torsion test at ambient temperature
TC 171 Document management applications
ISO/CD 32000-2
Document management — Portable document format — Part 2: PDF 2.0
TC 172 Optics and photonics
ISO 8624:2011/CD Amd 1
Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amend-ment 1
ISO/CD 10322-1
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks
ISO/CD 10322-2
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for pro-gressive power lens blanks
ISO/CD 13694 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution
TC 188 Small craft
ISO/CD 18854 Small craft — Test bed measurement of gase-ous and particulate exhaust emissions from reciprocating internal combustion engines
TC 190 Soil quality
ISO/CD 18311 Soil quality — Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms — Bait-lamina test
TC 198 Sterilization of health care products
ISO/CD 18362 Processing of cell-based health care products
TC 204 Intelligent transport systems
ISO/DTS 17426
Intelligent transport systems — Co-operative systems — Contextual speeds
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/CD 16782 Clinical laboratory testing - Criteria for accept-able lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing
TC 215 Health informatics
ISO/DTR 28380-3
Health informatics — Messages and Com-munication — IHE Global Standards Adoption Process — Part 3: Deployment
TC 219 Floor coverings
ISO/CD 18168 Textile floor coverings — Colour fastness to shampooing
TC 228 Tourism and related services
ISO/CD 13687 "Yachting clubs": The standardization of tourist services in yachting clubs and marinas
JTC 1 Information technology
ISO/IEC CD 29182-6
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 6: Applications
ISO/IEC CD 30120
Information technology — Software Engineer-ing - IT Audit — Auditguidelines that support the evaluation of the governance of IT
ISO/IEC PDTS 18661
Information Technology — Floating Point Extensions for C
ISO/IEC CD 29190
Proposal on Privacy capability assessment model
ISO Update, Supplement to ISO Focus -- June 2013 3
ISO/IEC CD 23008-8
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: HEVC Conformance Testing
ISO/IEC CD 23008-10
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 10:
ISO/IEC CD 18000-4
Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz Mode 3
ISO/IEC CD 19762
Information technology — Automatic identifi-cation and data capture techniques — Harmo-nized vocabulary
ISO/IEC CD 29167-14
Information technology — Automatic identifica-tion and data capture techniques — Part 14: Air Interface for security services crypto suite - AES OFB-like
ISO/IEC PDTR 15440
Information technology — Future keyboards and other input devices and entry methods
ISO/IEC CD 19788-8
Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data elements for MLR records
ISO/IEC CD 19788-9
Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data elements for Persons
ISO/IEC CD 36001
Quality for learning, education and training — Management systems — Requirements
ISO/IEC CD 17789
Information Technology — Cloud Computing — Reference Architecture
DIS circulated
Period from 01 May to 31 May 2013
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology
ISO/IEC DIS 13273-1
* Energy efficiency and renew-able energy sources — Common international terminology — Part 1: Energy Efficiency
2013-09-07
ISO/IEC DIS 13273-2
* Energy efficiency and renew-able energy sources — Common international terminology — Part 2: Renewable Energy Sources
2013-09-07
TC 8 Ships and marine technology
ISO/DIS 28004-3
* Security management systems for the supply chain - Guide-lines for the implementation of ISO 28000 — Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports)
2013-08-08
(Revision of ISO/PAS 28004-3:2012)
ISO/DIS 16145-5
* Ships and marine technol-ogy - Protective coatings and inspection method — Part 5: Assessment method for coating damages
2013-08-31
ISO/DIS 14884 * Large Yachts - Weathertight Doors - Strength and weather-tightness requirements
2013-08-14
TC 10 Technical product documentation
ISO/DIS 14084-1
* Process diagrams for power plants — Part 1: Specification for diagrams
2013-08-11
ISO/DIS 14084-2
* Process diagrams for power plants — Part 2: Graphical symbols
2013-08-07
TC 20 Aircraft and space vehicles
ISO/DIS 27027 * Aerospace — Solid-state remote power controllers — General performance requirements
2013-08-18
(Revision of ISO 27027:2008)
ISO/DIS 15845 * Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Function-al and safety requirements
2013-08-29
ISO/DIS 21100 * Air cargo unit load devices — Performance requirements and test parameters
2013-08-03
ISO/DIS 16694 * Space systems — The meas-ured parameters at firing bench and flight tests of liquid rocket engines
2013-08-03
ISO/DIS 16699 * Space systems — Disposal of orbital launch stages
2013-08-03
ISO/DIS 16781 * Space systems — Simulation requirements for control system
2013-08-13
TC 21 Equipment for fire protec-tion and fire fighting
ISO/DIS 7076-5
* Fire protection — Foam fire extinguishing systems — Part 5: Compressed air foam equipment
2013-08-16
TC 22 Road vehicles
ISO/DIS 16505 * Road vehicles — Ergonomic and performance aspects of Camera-Monitor Systems — Require-ments and test procedures
2013-08-30
TC 23 Tractors and machinery for agriculture and forestry
4 ISO Update, Supplement to ISO Focus -- June 2013
ISO/DIS 11783-7
* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 7: Imple-ment messages application layer
2013-08-21
(Revision of ISO 11783-7:2009)
TC 28 Petroleum products and lubricants
ISO/DIS 16861 * Petroleum products — Fuels (class F) — Specifications of Dimethylether (DME)
2013-08-11
ISO/DIS 17306 * Petroleum products — Biodiesel — Determination of free and totalglycerin and mono-, di- and tracylglycerols by gas chromatography
2013-08-08
ISO/DIS 17307 * Petroleum products — Biodiesel — Determination of total esters content by gas chromatography
2013-08-08
ISO/DIS 17315 * Ethanol — Determination of total acidity by potenciometric titration
2013-08-04
TC 29 Small tools
ISO/DIS 603-17.2
* Bonded abrasive products — Dimensions — Part 17: Spindle mounted wheels
2013-07-16
ISO/DIS 11901-3
* Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact build height
2013-08-28
ISO/DIS 11901-4
* Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same build height
2013-08-28
TC 31 Tyres, rims and valves
ISO/DIS 4251-1
* Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours
2013-08-18
(Revision of ISO 4251-1:2005, ISO 4251-1:2005/Amd 1:2012)
ISO/DIS 4251-2
* Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings
2013-08-18
(Revision of ISO 4251-2:2005, ISO 4251-2:2005/Amd 1:2011)
TC 35 Paints and varnishes
ISO/DIS 17463 * Paints and varnishes — Guide-lines for the determination of an-ticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
2013-10-03
TC 38 Textiles
ISO/DIS 17299-1
* Textiles — Determination of deodorant property — Part 1: General principle
2013-08-21
ISO/DIS 17299-2
* Textiles — Determination of deodorant property — Part 2: Detector tube method
2013-08-21
ISO/DIS 17299-3
* Textiles — Determination of deo-dorant property — Part 3: Gas chromatography method
2013-08-21
TC 46 Information and documentation
ISO/DIS 11620 * Information and documenta-tion — Library performance indicators
2013-08-07
(Revision of ISO 11620:2008)
TC 58 Gas cylinders
ISO 13341:2010/DAmd 1
* Gas cylinders — Fitting of valves to gas cylinders — Amendment 1
2013-10-03
ISO/DIS 16148 * Gas cylinders - Refillable seam-less steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
2013-10-10
(Revision of ISO 16148:2006)
TC 61 Plastics
ISO/DIS 11358-3.3
Plastics — Thermogravimetry (TG) of polymers — Part 3: De-termination of the activation en-ergy using the Ozawa-Friedman plot and analysis of the reaction kinetics
2013-07-25
ISO/DIS 13106.2
* Plastics — Blow-moulded poly-propylene containers for packag-ing of liquid foodstuffs
2013-07-16
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 17945 * Materials resistant to sulfide stress cracking in corrosive pe-troleum refining environments
2013-10-17
TC 68 Financial services
ISO/DIS 9362 * Banking — Banking telecommu-nication messages — Business identifier code (BIC)
2013-08-24
(Revision of ISO 9362:2009)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 13315-2
* Environmental management for concrete and concrete structures — Part 2: System boundary and inventory data
2013-08-18
TC 72 Textile machinery and accessories
ISO/DIS 11676 * Textile machinery and acces-sories — Pattern disks and pattern chains for warp knitting machines — Vocabulary and symbols
2013-08-13
(Revision of ISO 11676:1994)
ISO/DIS 12912 * Circular knitting machines — Vocabulary
2013-08-13
TC 81 Common names for pesticides and other agrochemicals
ISO/DIS 765 * Pesticides considered not to require common names
2013-08-25
ISO Update, Supplement to ISO Focus -- June 2013 5
(Revision of ISO 765:1976)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 21613 * (U, Pu)O2 Powders and sintered pellets — Determination of chlo-rine and fluorine
2013-08-29
TC 87 Cork
ISO/DIS 9986 * Composition cork for shoe outsoles
2013-08-25
(Revision of ISO 9986:1990)
TC 92 Fire safety
ISO/DIS 5660-1
* Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
2013-08-25
(Revision of ISO 5660-1:2002)
ISO/DIS 17554 * Reaction to fire tests — Mass loss measurement
2013-08-28
(Revision of ISO 17554:2005)
TC 106 Dentistry
ISO/DIS 13116 * Dentistry — Test Method for Determining Radio-Opacity of Materials
2013-10-24
ISO/DIS 15841 * Dentistry — Wires for use in orthodontics
2013-10-17
(Revision of ISO 15841:2006)
ISO/DIS 9680 * Dentistry — Operating lights
2013-10-17
(Revision of ISO 9680:2007)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 16063-22:2005/DAmd 1
* Methods for the calibration of vibration and shock transduc-ers — Part 22: Shock calibration by comparison to a reference transducer — Amendment 1
2013-08-17
ISO/DIS 16063-42
* Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seis-mometers with high accuracy using acceleration of gravity
2013-08-21
ISO 5349-2:2001/DAmd 1
* Mechanical vibration — Meas-urement and evaluation of hu-man exposure to hand-transmit-ted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1
2013-10-10
TC 113 Hydrometry
ISO/DIS 4375 * Hydrometric determinations — Cableway systems for stream gauging
2013-10-10
(Revision of ISO 4375:2000)
TC 115 Pumps
ISO/DIS 14414 * Pump system energy assessment
2013-10-17
TC 120 Leather
ISO/DIS 14931 * Leather — Guide to the selection of leather for apparel (excluding furs)
2013-10-17
(Revision of ISO 14931:2004)
TC 121 Anaesthetic and respiratory equipment
ISO/DIS 7396-1
* Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
2013-10-24
(Revision of ISO 7396-1:2007, ISO 7396-1:2007/Amd 1:2010, ISO 7396-1:2007/Amd 2:2010)
TC 131 Fluid power systems
ISO/DIS 7241-1
* Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
2013-08-14
(Revision of ISO 7241-1:1987)
ISO/DIS 6953-1
* Pneumatic fluid power — Com-pressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from sup-pliers and product-marking requirements
2013-08-11
(Revision of ISO 6953-1:2000, ISO 6953-1:2000/Cor 1:2006)
ISO/DIS 6953-2
* Pneumatic fluid power — Com-pressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
2013-08-11
(Revision of ISO 6953-2:2000)
ISO/DIS 10767-1
* Hydraulic fluid power — Deter-mination of pressure ripple levels generated in systems and com-ponents — Part 1: Method for determining source flow ripple and source impedance of pumps
2013-08-17
(Revision of ISO 10767-1:1996)
TC 135 Non-destructive testing
ISO/DIS 9934-1
* Non-destructive testing — Mag-netic particle testing — Part 1: General principles
2013-10-24
(Revision of ISO 9934-1:2001)
ISO/DIS 9934-2
* Non-destructive testing — Mag-netic particle testing — Part 2: Detection media
2013-10-24
(Revision of ISO 9934-2:2002)
ISO/DIS 9934-3
* Non-destructive testing — Mag-netic particle testing — Part 3: Equipment
2013-10-24
(Revision of ISO 9934-3:2002)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 9967 * Thermoplastics pipes — Deter-mination of creep ratio
2013-10-03
6 ISO Update, Supplement to ISO Focus -- June 2013
(Revision of ISO 9967:2007)
ISO/DIS 9969 * Thermoplastics pipes — Deter-mination of ring stiffness
2013-10-03
(Revision of ISO 9969:2007)
TC 147 Water quality
ISO/DIS 5667-14
* Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
2013-08-18
(Revision of ISO 5667-14:1998)
TC 150 Implants for surgery
ISO/DIS 14243-3
* Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displace-ment parameters for wear-testing machines with displace-ment control and corresponding environmental conditions for test
2013-08-13
(Revision of ISO 14243-3:2004, ISO 14243-3:2004/Cor 1:2006)
TC 172 Optics and photonics
ISO/DIS 9022-23
* Optics and photonics — Envi-ronmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat
2013-08-04
(Revision of ISO 9022-5:1994, ISO 9022-18:1994, ISO 9022-21:1998)
ISO/DIS 10109 * Optics and photonics — Guid-ance for the selection of environ-mental tests
2013-08-04
(Revision of ISO 10109-7:2001, ISO 10109-11:2001, ISO 10109-12:2004, ISO 10109-1:2005, ISO 10109-6:2005, ISO 10109-8:2005)
ISO/DIS 10110-5
* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 5: Surface form tolerances
2013-08-28
(Revision of ISO 10110-5:2007)
ISO/DIS 10110-6
* Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
2013-08-28
(Revision of ISO 10110-6:1996, ISO 10110-6:1996/Cor 1:1999)
ISO/DIS 10110-19
* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 19: Optical freeform surfaces
2013-08-28
ISO/DIS 14999-4
* Optics and photonics — Interfer-ometric measurement of optical elements and optical systems — Part 4: Interpretation and evalu-ation of tolerances specified in ISO 10110
2013-08-28
(Revision of ISO 14999-4:2007)
ISO/DIS 17328 * Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials
2013-08-04
ISO/DIS 9849 * Optics and optical instruments — Geodetic and surveying instruments — Vocabulary
2013-08-30
(Revision of ISO 9849:2000)
ISO 11979-9:2006/DAmd 1
* Ophthalmic implants — Intraocu-lar lenses — Part 9: Multifocal intraocular lenses — Amend-ment 1
2013-10-10
ISO 11979-10:2006/DAmd 1
* Ophthalmic implants — Intraocu-lar lenses — Part 10: Phakic intraocular lenses — Amend-ment 1
2013-10-10
TC 181 Safety of toys
ISO 8124-1:2012/DAmd 1
* Safety of toys — Part 1: Safety aspects related to mechani-cal and physical properties — Amendment 1: Projectiles, rotors and propellers
2013-08-07
ISO/DIS 8124-2
* Safety of toys — Part 2: Flammability
2013-08-14
(Revision of ISO 8124-2:2007)
TC 189 Ceramic tile
ISO/DIS 13007-1
* Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
2013-08-13
(Revision of ISO 13007-1:2010)
TC 190 Soil quality
ISO/DIS 16558-1
* Soil quality — Risk based petroleum hydrocarbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
2013-10-31
ISO/DIS 16558-2
* Soil quality — Risk-based petroleum hydrocarbons — Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID)
2013-10-31
ISO/DIS 11268-3
* Soil quality — Effects of pollut-ants on earthworms — Part 3: Guidance on the determination of effects in field situations
2013-08-25
(Revision of ISO 11268-3:1999)
TC 204 Intelligent transport systems
ISO/DIS 24534-3
* Intelligent transport systems — Automatic vehicle and equip-ment identification — Electronic registration identification (ERI) for vehicles — Part 3: Vehicle data
2013-10-03
(Revision of ISO 24534-3:2010)
TC 206 Fine ceramics
ISO/DIS 18560-1
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocata-lytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde
2013-08-22
TC 244 Industrial furnaces and associated processing equipment
ISO/DIS 13577-4
* Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
2013-08-28
ISO Update, Supplement to ISO Focus -- June 2013 7
TC 247 Fraud countermeasures and controls
ISO/DIS 16678 * GuideIines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade
2013-08-26
TC 268 Sustainable development in communities
ISO/DIS 37120 * Sustainable development and resilience of communities — Indicators for city services and quality of life
2013-08-28
JTC 1 Information technology
ISO/IEC DIS 7811-1
* Identification cards — Recording technique — Part 1: Embossing
2013-08-28
(Revision of ISO/IEC 7811-1:2002)
ISO/IEC DIS 7811-2
* Identification cards — Recording technique — Part 2: Magnetic stripe
2013-08-28
(Revision of ISO/IEC 7811-2:2001)
ISO/IEC DIS 7811-6
* Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity
2013-08-28
(Revision of ISO/IEC 7811-6:2008, ISO/IEC 7811-6:2008/Cor 1:2010)
ISO/IEC DIS 7811-7
* Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density
2013-08-28
(Revision of ISO/IEC 7811-7:2004)
ISO/IEC DIS 7811-8
* Identification cards — Recording technique — Part 8: Magnetic stripe — Coercivity of 51,7 kA/m (650 Oe)
2013-08-28
(Revision of ISO/IEC 7811-8:2008)
ISO/IEC DIS 10373-2
* Identification cards — Test methods — Part 2: Cards with magnetic stripes
2013-08-28
(Revision of ISO/IEC 10373-2:2006, ISO/IEC 10373-2:2006/Cor 1:2010)
ISO/IEC DIS 11694-5
* Identification cards — Optical memory cards — Linear record-ing method — Part 5: Data for-mat for information interchange for applications using ISO/IEC 11694-4
2013-08-18
(Revision of ISO/IEC 11694-5:2006)
ISO/IEC DIS 11694-6
* Identification cards — Optical memory cards — Linear record-ing method — Part 6: Use of biometrics on an optical memory card
2013-08-18
(Revision of ISO/IEC 11694-6:2006)
ISO/IEC DIS 20006-1
* Information Technology for Learning, Education and Train-ing — Information Model for Competency — Part 1: Compe-tency General Framework and Information Model
2013-08-18
FDIS circulated
Period from 01 May to 31 May 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 1 Screw threads
ISO/FDIS 965-1
* ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
2013-07-29
(Revision of ISO 965-1:1998, ISO 965-1:1998/Cor 1:2009)
TC 2 Fasteners
ISO/FDIS 14581
* Fasteners — Hexalobular socket countersunk flat head screws
2013-07-24
ISO/FDIS 14582
* Hexalobular socket countersunk head screws, high head
2013-07-24
TC 4 Rolling bearings
ISO 1206:2001/FDAmd 1
* Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimen-sions and tolerances — Amend-ment 1: Tolerances for shaft raceway
2013-07-11
TC 23 Tractors and machinery for agriculture and forestry
ISO 10517:2009/FDAmd 1
* Powered hand-held hedge trim-mers — Safety — Amendment 1
2013-07-03
ISO/FDIS 11783-14.2
* Tractors and machinery for agriculture and forestry — Se-rial control and communica-tions data network — Part 14: Sequence control
2013-07-24
TC 24 Particle characterization including sieving
ISO/FDIS 20998-2
* Measurement and characteri-zation of particles by acoustic methods — Part 2: Guidelines for linear theory
2013-07-07
ISO/FDIS 3310-2
* Test sieves — Technical require-ments and testing — Part 2: Test sieves of perforated metal plate
2013-07-21
(Revision of ISO 3310-2:1999)
TC 27 Solid mineral fuels
ISO/FDIS 334 * Solid mineral fuels — Determi-nation of total sulfur — Eschka method
2013-07-09
(Revision of ISO 334:1992)
8 ISO Update, Supplement to ISO Focus -- June 2013
ISO/FDIS 23380
* Selection of methods for the determination of trace elements in coal
2013-07-07
(Revision of ISO 23380:2008)
TC 28 Petroleum products and lubricants
ISO/FDIS 5163 * Petroleum products — Determi-nation of knock characteristics of motor and aviation fuels — Mo-tor method
2013-07-17
(Revision of ISO 5163:2005, ISO 5163:2005/Cor 1:2008)
ISO/FDIS 5164 * Petroleum products — Determi-nation of knock characteristics of motor fuels — Research method
2013-07-17
(Revision of ISO 5164:2005)
TC 29 Small tools
ISO/FDIS 3338-2
* Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindri-cal shanks
2013-07-07
(Revision of ISO 3338-2:2007)
ISO/FDIS 10649-1
* Cutter arbors with parallel key and tenon drive — Part 1: Gen-eral dimensions
2013-07-17
(Revision of ISO 10649-1:2010)
ISO/FDIS 10649-2
* Cutter arbors with parallel key and tenon drive — Part 2: Di-mensions and designation of tool holders with taper interface with flange contact surface
2013-07-17
(Revision of ISO 10649-2:2010)
ISO/FDIS 10649-3
* Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
2013-07-17
(Revision of ISO 10649-3:2010)
ISO/FDIS 10649-4
* Cutter arbors with parallel key and tenon drive — Part 4: Di-mensions and designation of tool holders with 7/24 taper without automatic tool changer
2013-07-17
(Revision of ISO 10649-4:2010)
TC 33 Refractories
ISO/FDIS 16334
* Monolithic refractory products — Determination of resistance to explosive spalling
2013-07-08
TC 34 Food products
ISO/FDIS 9622 * Milk and liquid milk products — Guidelines for the application of mid-infrared spectrometry
2013-07-17
(Revision of ISO 9622:1999)
ISO/FDIS 13495
* Foodstuffs — Principles of selec-tion and criteria of validation for varietal identification methods using specific nucleic acid
2013-07-18
TC 35 Paints and varnishes
ISO/FDIS 11997-2
* Paints and varnishes — Determi-nation of resistance to cyclic cor-rosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
2013-07-17
(Revision of ISO 11997-2:2000)
ISO/FDIS 15528
* Paints, varnishes and raw ma-terials for paints and varnishes — Sampling
2013-07-17
(Revision of ISO 15528:2000)
TC 39 Machine tools
ISO 230-10:2011/FDAmd 1
* Test code for machine tools — Part 10: Determination of the measuring performance of prob-ing systems of numerically con-trolled machine tools — Amend-ment 1: Measuring performance with scanning probes
2013-07-30
TC 44 Welding and allied processes
ISO/FDIS 14113
* Gas welding equipment — Rub-ber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
2013-08-03
(Revision of ISO 14113:2007)
TC 45 Rubber and rubber products
ISO/FDIS 17278
* Rubber, raw natural — Determi-nation of the gel content of tech-nically specified rubber (TSR)
2013-07-07
TC 58 Gas cylinders
ISO/FDIS 3807 * Gas cylinders — Acetylene cylin-ders — Basic requirements and type testing
2013-07-03
(Revision of ISO 3807-1:2000, ISO 3807-2:2000, ISO/NP 3807-1, ISO/NP 3807-2)
ISO/FDIS 12209
* Gas cylinders — Outlet connec-tions for gas cylinder valves for compressed breathable air
2013-07-17
(Revision of ISO 12209-1:2000, ISO 12209-2:2000, ISO 12209-3:2000)
TC 61 Plastics
ISO/FDIS 4892-3
* Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
2013-07-24
(Revision of ISO 4892-3:2006)
TC 69 Applications of statistical methods
ISO/FDIS 22514-2
* Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
2013-07-08
(Revision of ISO 21747:2006)
TC 70 Internal combustion engines
ISO/FDIS 4548-13
* Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite filter housings
2013-07-08
TC 83 Sports and other rec-reational facilities and equipment
ISO/FDIS 20957-1
* Stationary training equipment — Part 1: General safety require-ments and test methods
2013-07-17
(Revision of ISO 20957-1:2005)
ISO Update, Supplement to ISO Focus -- June 2013 9
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/FDIS 12749-2
* Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection
2013-07-22
TC 92 Fire safety
ISO/FDIS 29904
* Fire chemistry — Generation and measurement of aerosols
2013-07-07
TC 93 Starch (including deriva-tives and by-products)
ISO/FDIS 5379 * Starches and derived prod-ucts — Determination of sulfur dioxide content — Acidimetric method and nephelometric method
2013-07-17
(Revision of ISO 5379:1983)
ISO/FDIS 10504
* Starch derivatives — Determina-tion of the composition of glu-cose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography
2013-07-17
(Revision of ISO 10504:1998)
TC 106 Dentistry
ISO/FDIS 28888
* Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues
2013-07-31
TC 110 Industrial trucks
ISO/FDIS 3691-6
* Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers
2013-07-03
(Revision of ISO 3691:1980)
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-30:2009/FDAmd 1
Medical electrical equip-ment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphyg-momanometers — Amendment 1
2013-07-06
TC 123 Plain bearings
ISO/FDIS 12130-2
* Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings
(Revision of ISO 12130-2:2001)
TC 126 Tobacco and tobacco products
ISO/FDIS 20773
* Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in side-stream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
2013-07-03
(Revision of ISO 20773:2007)
ISO/FDIS 20774
* Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
2013-07-03
(Revision of ISO 20774:2007)
TC 147 Water quality
ISO/FDIS 17378-1
* Water quality — Determination of arsenic and antimony — Part 1: Method using hydride generation atomic fluorescence spectrom-etry (HG-AFS)
2013-07-17
ISO/FDIS 17378-2
* Water quality — Determination of arsenic and antimony — Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
2013-07-17
(Revision of ISO 11969:1996)
ISO/FDIS 13164-1
* Water quality — Radon-222 — Part 1: General principles
2013-07-07
ISO/FDIS 13164-2
* Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry
2013-07-07
ISO/FDIS 13164-3
* Water quality — Radon-222 — Part 3: Test method using emanometry
2013-07-07
TC 150 Implants for surgery
ISO/FDIS 16087
* Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
2013-07-31
TC 159 Ergonomics
ISO/FDIS 11064-4
* Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
2013-07-24
(Revision of ISO 11064-4:2004)
TC 164 Mechanical testing of metals
ISO/FDIS 18265
* Metallic materials — Conversion of hardness values
2013-07-03
(Revision of ISO 18265:2003)
TC 172 Optics and photonics
ISO/FDIS 8255-2
* Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging
2013-07-22
(Revision of ISO 8255-2:1997)
TC 190 Soil quality
ISO/FDIS 28258
* Soil quality — Digital exchange of soil-related data
2013-07-24
ISO/FDIS 29200
* Soil quality — Assessment of ge-notoxic effects on higher plants — Vicia faba micronucleus test
2013-07-23
TC 199 Safety of machinery
ISO/FDIS 14119
* Safety of machinery — Inter-locking devices associated with guards — Principles for design and selection
2013-07-24
(Revision of ISO 14119:1998, ISO 14119:1998/Amd 1:2007)
TC 218 Timber
ISO/FDIS 8965 * Logging industry — Technology — Terms and definitions
2013-07-29
(Revision of ISO 8965:1987)
10 ISO Update, Supplement to ISO Focus -- June 2013
TC 223 Societal security
ISO/FDIS 22398
* Societal security — Guidelines for exercises
2013-07-18
JTC 1 Information technology
ISO/IEC/IEEE FDIS 8802-1X
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control
2013-10-17
ISO/IEC/IEEE FDIS 8802-1AE
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Part 1AE: Media ac-cess control (MAC) security
2013-10-17
ISO/IEC 14443-4:2008/FDAmd 3
* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
2013-07-22
ISO/IEC 14496-10:2012/FDAmd 2
* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2: MVC exten-sions for inclusion of depth maps
2013-07-30
ISO/IEC 14496-12:2012/FDAmd 1
* Information technology — Cod-ing of audio-visual objects — Part 12: ISO base media file format — Amendment 1: Various enhancements including support for large metadata
2013-07-25
(Revision of ISO/IEC 14496-12:2008/DAmd 4)
ISO/IEC 15444-12:2012/FDAmd 1
* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 1: Various enhancements including support for large metadata
2013-07-25
(Revision of ISO/IEC 15444-12:2008/DAmd 4)
ISO/IEC FDIS 23008-2
* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding
2013-07-15
ISO/IEC FDIS 24730-62
Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repeti-tion frequency Ultra Wide Band (UWB) air interface
2013-07-11
Standards published
New International Standards published between 01 May and 31 May 2013
* Available in English only
** French version of standard previously published in English only
Price
group
TC 8 Ships and marine technology
ISO 13073-2:2013
* Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 2: Marine environmental risk assessment method for anti-foul-ing systems on ships using biocidally active substances
E
ISO 8277:2013 * Ships and marine technology — Pipe-work and machinery — Information transfer
D
ISO 17682:2013
* Ships and marine technology — Meth-odology for ship launching utilizing air bags
F
TC 17 Steel
ISO 5951:2013 * Hot-rolled steel sheet of higher yield strength with improved formability
E
TC 20 Aircraft and space vehicles
ISO 16049-2:2013
* Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing calculations
G
ISO 15887:2013
* Space data and information transfer systems — Lossless data compression
S
ISO 17807:2013
* Space data and information transfer systems - Asynchronous message service
XB
ISO 17854:2013
* Space data and information transfer systems — Flexible advanced coding and modulation scheme for high rate telemetry applications
W
ISO 18201:2013
* Space data and information transfer systems — Mission operations refer-ence model
W
ISO 18202:2013
* Space data and information transfer systems — Mission operations mes-sage abstraction layer
XC
ISO 18381:2013
* Space data and information transfer systems — Lossless multispectral and hyperspectral image compression
U
ISO 18382:2013
* Space data and information transfer systems — Spacecraft onboard inter-face services — RFID-based inventory management systems
T
ISO 18423:2013
* Space data and information transfer systems — Pseudo-Noise (PN) Rang-ing Systems
R
ISO 18424:2013
* Space data and information transfer systems — XML Telemetric and Com-mand Exchange (XTCE)
X
ISO Update, Supplement to ISO Focus -- June 2013 11
ISO 18425:2013
* Space data and information transfer systems — Spacecraft Onboard Inter-face Services — Subnetwork Packet Service
N
ISO 18426:2013
* Space data and information transfer systems — Spacecraft Onboard Inter-face Services — Subnetwork Memory Access Service
N
ISO 18427:2013
* Space data and information transfer systems — Spacecraft Onboard Inter-face Services — Subnetwork Synchro-nization Service
L
ISO 18428:2013
* Space data and information transfer systems — Spacecraft Onboard Inter-face Services — Subnetwork Device Discovery Service
L
ISO 18438:2013
* Space data and information trans-fer systems — Spacecraft Onboard Interface Services — Subnetwork Test Service
L
ISO 18439:2013
* Space data and information transfer systems — Space Communication Cross Support — Service Management — Service Specification
XC
ISO 18440:2013
* Space data and information transfer systems — Space Link Extension — Internet Protocol for Transfer Services
W
ISO 18441:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for Transfer Services — Core Specification
XC
ISO 18442:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for Return All Frames Service
V
ISO 18443:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for Return Channel Frames Service
V
ISO 18444:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for Re-turn Operational Control Fields Service
W
ISO 18445:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for the Forward CLTU Service
X
ISO 18446:2013
* Space data and information transfer systems — Space Link Extension — Application Program Interface for the Forward Space Packet Service
XC
ISO 22664:2013
* Space data and information transfer systems — TC (telecommand) space data link protocol
XA
ISO 22667:2013
* Space data and information transfer systems — Communications operation procedure-1
X
ISO 22669:2013
* Space data and information transfer systems — Space link extension (SLE) — Return-all-frames service
XB
ISO 22670:2013
* Space data and information transfer systems — Space link extension (SLE) — Return-channel-frames service
XB
ISO 26143:2013
* Space data and information transfer systems — Space link extension (SLE) — Return operational control fields service
XC
ISO 16698:2013
* Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity
L
TC 22 Road vehicles
ISO 2698:2013 * Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
C
ISO 17949:2013
* Impact test procedures for road vehi-cles — Seating and positioning proce-dures for anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
C
ISO 15830-1:2013
* Road vehicles — Design and perfor-mance specifications for the WorldSID 50th percentile male side-impact dummy — Part 1: Terminology and rationale
XB
ISO 15830-2:2013
* Road vehicles — Design and perfor-mance specifications for the WorldSID 50th percentile male side-impact dum-my — Part 2: Mechanical subsystems
R
ISO 15830-3:2013
* Road vehicles — Design and perfor-mance specifications for the WorldSID 50th percentile male side-impact dum-my — Part 3: Electronic subsystems
S
ISO 15830-4:2013
* Road vehicles — Design and perfor-mance specifications for the World-SID 50th percentile male side impact dummy — Part 4: User's manual
XA
TC 23 Tractors and machinery for agri-culture and forestry
ISO 3776-2:2013
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
D
ISO 5700:2013 * Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
R
ISO 16236:2013
Crop protection equipment — Test method for the determination of drain-able volume and its concentration
C
ISO 19932-1:2013
Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements
J
ISO 19932-2:2013
Equipment for crop protection — Knapsack sprayers — Part 2: Test methods
L
TC 24 Particle characterization includ-ing sieving
ISO/TR 13097:2013
* Guidelines for the characterization of dispersion stability
H
TC 27 Solid mineral fuels
ISO 579:2013 Coke — Determination of total moisture
B
ISO 975:2013 Brown coals and lignites — Determina-tion of yield of benzene-soluble extract — Semi-automatic method
B
12 ISO Update, Supplement to ISO Focus -- June 2013
ISO 5071-1:2013
Brown coals and lignites — Deter-mination of the volatile matter in the analysis sample — Part 1: Two-furnace method
D
ISO 5072:2013 Brown coals and lignites — Determina-tion of true relative density and appar-ent relative density
C
ISO 5073:2013 Brown coals and lignites — Determina-tion of humic acids
D
TC 29 Small tools
ISO 236-2:2013
Reamers — Part 2: Long fluted ma-chine reamers with Morse taper shanks
C
ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads
C
ISO 6344-3:2013
Coated abrasives — Grain size analy-sis — Part 3: Determination of grain size distribution of microgrits P240 to P2500
M
TC 34 Food products
ISO 17715:2013
Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement
G
ISO 17718:2013
Wholemeal and flour from wheat (Triti-cum aestivum L.) — Determination of rheological behaviour as a function of mixing and temperature increase
R
ISO 16297:2013
Milk — Bacterial count — Protocol for the evaluation of alternative methods
G
TC 38 Textiles
ISO 105-B02:2013
Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
Q
TC 39 Machine tools
ISO 29262:2011
Production equipment for microsys-tems — Interface between end effector and handling system
J
TC 42 Photography
ISO 18947:2013
* Imaging materials — Photographic reflection prints — Determination of abrasion resistance of photographic images
F
TC 43 Acoustics
ISO 10848-4:2010
Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 4: Application to junc-tions with at least one heavy element
E
TC 44 Welding and allied processes
ISO 24394:2008/Amd 1:2012
* Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components — Amendment 1
XZ
TC 45 Rubber and rubber products
ISO 16565:2013
* Rubber — Determination of 5-ethylide-nenorbornene (ENB) or dicyclopenta-diene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
G
TC 58 Gas cylinders
ISO 11439:2013
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
W
TC 61 Plastics
ISO 26842-1:2013
* Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
D
ISO 26842-2:2013
* Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
C
TC 63 Glass containers
ISO 12818:2013
* Glass packaging — Standard toler-ances for flaconnage
E
TC 68 Financial services
ISO 20022-1:2013
* Financial services — Universal financial industry message scheme — Part 1: Metamodel
XC
ISO 20022-2:2013
* Financial services — Universal financial industry message scheme — Part 2: UML profile
W
ISO 20022-3:2013
* Financial services — Universal financial industry message scheme — Part 3: Modelling
M
ISO 20022-4:2013
* Financial services — Universal financial industry message scheme — Part 4: XML Schema generation
L
ISO 20022-5:2013
* Financial services — Universal financial industry message scheme — Part 5: Reverse engineering
R
ISO 20022-6:2013
* Financial services — Universal financial industry message scheme — Part 6: Message transport characteristics
D
ISO 20022-7:2013
* Financial services — Universal financial industry message scheme — Part 7: Registration
C
ISO 20022-8:2013
* Financial services — Universal financial industry message scheme — Part 8: ASN.1 generation
M
ISO 1004-1:2013
* Information processing — Magnetic ink character recognition — Part 1: Print specifications for E13B
S
ISO 1004-2:2013
* Information processing — Magnetic ink character recognition — Part 2: Print specifications for CMC7
P
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-11:2013
* Testing of concrete — Part 11: Deter-mination of the chloride resistance of concrete, unidirectional diffusion
K
ISO Update, Supplement to ISO Focus -- June 2013 13
ISO 28841:2013
* Guidelines for simplified seismic as-sessment and rehabilitation of concrete buildings
W
TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use
ISO 3826-1:2013
Plastics collapsible containers for hu-man blood and blood components — Part 1: Conventional containers
M
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO/ASTM 51275:2013
* Practice for use of a radiochromic film dosimetry system
C
ISO/ASTM 51607:2013
* Practice for use of the alanine-EPR dosimetry system
D
ISO/ASTM 51650:2013
* Practice for use of a cellulose triacetate dosimetry system
C
ISO/ASTM 51818:2013
* Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
G
TC 94 Personal safety -- Protective clothing and equipment
ISO 20471:2013
High visibility clothing — Test methods and requirements
L
ISO/TS 16976-8:2013
Respiratory protective devices — Human factors — Part 8: Ergonomic factors
K
TC 104 Freight containers
ISO 17712:2013
* Freight containers — Mechanical seals
P
TC 106 Dentistry
ISO 29022:2013
Dentistry — Adhesion — Notched-edge shear bond strength test
F
TC 108 Mechanical vibration, shock and condition monitoring
ISO/TR 19201:2013
* Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
N
ISO 18436-8:2013
Condition monitoring and diagnostics of machines — Requirements for quali-fication and assessment of personnel — Part 8: Ultrasound
E
TC 110 Industrial trucks
ISO 22915-15:2013
Industrial trucks — Verification of stability — Part 15: Counterbalanced trucks with articulated steering
C
TC 112 Vacuum technology
ISO 2861:2013 Vacuum technology — Dimensions of clamped-type quick-release couplings
C
TC 119 Powder metallurgy
ISO 4491-4:2013
Metallic powders — Determina-tion of oxygen content by reduction methods — Part 4: Total oxygen by reduction-extraction
C
ISO 13517:2013
Metallic powders — Determination of flowrate by means of a calibrated fun-nel (Gustavsson flowmeter)
C
TC 126 Tobacco and tobacco products
ISO 16632:2013
Tobacco and tobacco products — De-termination of water content — Gas-chromatographic method
E
TC 127 Earth-moving machinery
ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
C
TC 131 Fluid power systems
ISO 6358-1:2013
Pneumatic fluid power — Determi-nation of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
V
ISO 6358-2:2013
Pneumatic fluid power — Determina-tion of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
S
TC 135 Non-destructive testing
ISO 3452-1:2013
Non-destructive testing — Penetrant testing — Part 1: General principles
L
TC 136 Furniture
ISO 4211-2:2013
Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
C
ISO 4211-3:2013
Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat
C
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewer-age networks under pressure — Part 1: General
H
TC 145 Graphical symbols
ISO 7001:2007/Amd 1:2013
Graphical symbols — Public informa-tion symbols — Amendment 1
S
TC 146 Air quality
ISO/TR 17737:2012
Workplace atmospheres — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
E
TC 147 Water quality
ISO 11206:2011
Water quality — Determination of dis-solved bromate — Method using ion chromatography (IC) and post column reaction (PCR)
H
14 ISO Update, Supplement to ISO Focus -- June 2013
TC 159 Ergonomics
ISO/TR 12296:2012
Ergonomics — Manual handling of people in the healthcare sector
X
TC 163 Thermal performance and en-ergy use in the built environment
ISO 12567-1:2010
Thermal performance of windows and doors — Determination of thermal transmittance by the hot-box method — Part 1: Complete windows and doors
U
ISO 12569:2012
Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method
U
ISO 12570:2000/Amd 1:2013
Hygrothermal performance of building materials and products — Determina-tion of moisture content by drying at elevated temperature — Amendment 1
XZ
ISO 14683:2007
Thermal bridges in building construc-tion — Linear thermal transmittance — Simplified methods and default values
L
TC 164 Mechanical testing of metals
ISO 9513:2012/Cor 1:2013
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
free
TC 172 Optics and photonics
ISO 19012-1:2013
* Microscopes — Designation of micro-scope objectives — Part 1: Flatness of field/Plan
D
TC 176 Quality management and quality assurance
ISO 10008:2013
Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions
N
TC 184 Automation systems and integration
IEC 62264-1:2013
* Enterprise-control system integration — Part 1: Models and terminology
XC
TC 198 Sterilization of health care products
ISO 11137-2:2013
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose
V
ISO/TS 13004:2013
* Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD
U
TC 201 Surface chemical analysis
ISO 16531:2013
* Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated meas-urement of current or current density for depth profiling in AES and XPS
J
TC 204 Intelligent transport systems
ISO 22839:2013
* Intelligent transport systems — For-ward vehicle collision mitigation sys-tems — Operation, performance, and verification requirements
Q
ISO 24531:2013
* Intelligent transport systems — System architecture, taxonomy and terminol-ogy — Using XML in ITS standards, data registries and data dictionaries
XB
ISO/TS 25110:2013
* Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)
Q
TC 207 Environmental management
ISO/TS 14067:2013
* Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication
U
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15197:2013
In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
T
TC 215 Health informatics
ISO 17090-1:2013
* Health informatics — Public key infra-structure — Part 1: Overview of digital certificate services
R
TC 219 Floor coverings
ISO 10581:2011
Resilient floor coverings — Homogene-ous poly(vinyl chloride) floor covering — Specifications
D
TC 229 Nanotechnologies
ISO/TS 16195:2013
Nanotechnologies — Guidance for developing representative test materi-als consisting of nano-objects in dry powder form
D
ISO/TS 17200:2013
Nanotechnology — Nanoparticles in powder form — Characteristics and measurements
D
TC 261 Additive manufacturing
ISO/ASTM 52915:2013
Standard specification for additive manufacturing file format (AMF) Version 1.1
H
ISO/ASTM 52921:2013
Standard terminology for additive manufacturing — Coordinate systems and test methodologies
H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17502:2013
Leather — Determination of surface reflectance
C
CASCO Committee on conformity assessment
ISO/IEC TS 17021-3:2013
* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 3: Competence requirements for auditing and certification of quality management systems
C
JTC 1 Information technology
ISO/IEC 29182-1:2013
* Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 1: General overview and requirements
D
ISO Update, Supplement to ISO Focus -- June 2013 15
ISO/IEC 29182-2:2013
* Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 2: Vocabu-lary and terminology
E
ISO/IEC 9594-6:2008/Cor 3:2013
* Information technology — Open Sys-tems Interconnection — The Directory: Selected attribute types — Part 6: — Technical Corrigendum 3
free
ISO/IEC 9594-8:2008/Cor 3:2013
* Information technology — Open Sys-tems Interconnection — The Directory: Public-key and attribute certificate frameworks — Part 8: — Technical Corrigendum 3
free
ISO/IEC 1539-1:2010/Cor 2:2013
* Information technology — Program-ming languages — Fortran — Part 1: Base language — Technical Corrigen-dum 2
free
ISO/IEC 29192-4:2013
* Information technology — Security techniques — Lightweight cryptog-raphy — Part 4: Mechanisms using asymmetric techniques
M
ISO/IEC 10918-4:1999/Amd 1:2013
* Information technology — Digital com-pression and coding of continuous-tone still images: Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Regis-tration Authorities (REGAUT) — Part 4: — Amendment 1: Application specific marker list
XZ
ISO/IEC 13818-1:2013
* Information technology — Generic coding of moving pictures and as-sociated audio information: Systems — Part 1:
XC
ISO/IEC 15444-1:2004/Amd 6:2013
* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 6: Updated ICC profile support and reso-lution clarification
XZ
ISO/IEC 23002-1:2006/Amd 1:2008/Cor 1:2013
* Information technology — MPEG video technologies — Part 1: Accuracy requirements for implementation of integer-output 8x8 inverse discrete cosine transform — Amendment 1: Software for integer IDCT accuracy testing — Technical Corrigendum 1
free
ISO/IEC 23005-5:2013
* Information technology — Media con-text and control — Part 5: Data formats for interaction devices
XC
ISO/IEC 23009-1:2012/Cor 1:2013
* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation descrip-tion and segment formats — Technical Corrigendum 1
free
ISO/IEC 12785-1:2009/Cor 1:2013
* Information technology — Learning, education, and training — Content packaging — Part 1: Information model — Technical Corrigendum 1
free
Standards confirmed
The following International Standards are confimred for a five year period:
TC 8 Ships and marine technology
ISO 1964:1987 (reconfirmed)
ISO 5572:1987 (reconfirmed)
ISO 6050:1987 (reconfirmed)
TC 17 Steel
ISO 2605-3:1985 (reconfirmed)
ISO 4978:1983 (reconfirmed)
ISO 6303:1981 (reconfirmed)
ISO 9327-1:1999 (reconfirmed)
ISO 9327-2:1999 (reconfirmed)
ISO 9327-3:1999 (reconfirmed)
ISO 9327-4:1999 (reconfirmed)
ISO 9327-5:1999 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 12:1987 (reconfirmed)
TC 22 Road vehicles
ISO 12097-2:1996 (reconfirmed)
ISO/TS 22240:2008
ISO 27956:2009
TC 30 Measurement of fluid flow in closed conduits
ISO 2975-2:1975 (reconfirmed)
ISO 2975-3:1976 (reconfirmed)
ISO 2975-6:1977 (reconfirmed)
ISO 2975-7:1977 (reconfirmed)
ISO 9104:1991 (reconfirmed)
TC 61 Plastics
ISO 4578:1997 (reconfirmed)
ISO 10354:1992 (reconfirmed)
ISO 10363:1992 (reconfirmed)
ISO 10365:1992 (reconfirmed)
ISO 14615:1997 (reconfirmed)
ISO 14676:1997 (reconfirmed)
ISO 14679:1997 (reconfirmed)
TC 105 Steel wire ropes
ISO 12076:2002 (reconfirmed)
TC 114 Horology
ISO 764:2002 (reconfirmed)
TC 134 Fertilizers and soil conditioners
ISO 3944:1992 (reconfirmed)
ISO 5311:1992 (reconfirmed)
ISO 5313:1986 (reconfirmed)
ISO 7409:1984 (reconfirmed)
ISO 8397:1988 (reconfirmed)
ISO 8398:1989 (reconfirmed)
ISO 10248:1996 (reconfirmed)
TC 172 Optics and photonics
ISO 11146-1:2005
ISO 11146-2:2005
ISO/TR 11552:1997
ISO 12005:2003
ISO 13695:2004 (reconfirmed)
ISO 13696:2002 (reconfirmed)
TC 178 Lifts, escalators and moving walks
16 ISO Update, Supplement to ISO Focus -- June 2013
ISO 4190-2:2001 (reconfirmed)
ISO 4190-3:1982 (reconfirmed)
ISO 9386-1:2000 (reconfirmed)
ISO 9386-2:2000 (reconfirmed)
ISO 9589:1994 (reconfirmed)
ISO/TR 16764:2003
TC 215 Health informatics
ISO/IEEE 11073-20601:2010
Standards withdrawn
Period from 01 May to 31 May 2013
TC 29 Small tools
ISO 3439:2003 (replaced by ISO 3438:2013)
TC 68 Financial services
ISO/TS 20022-3:2004
(replaced by ISO 20022-3:2013)
ISO/TS 20022-4:2004
(replaced by ISO 20022-4:2013)
ISO/TS 20022-5:2004
(replaced by ISO 20022-5:2013)
ISO 1004:1995 (replaced by ISO 1004-1:2013)
Meeting calendar
(update at 01 May 2013)
Meetings called for the month of April are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
June 2013
3-5 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables
3-6 Paris (France) TC 46/SC 11 Information and doc-umentation/Archives/records management
3-7 Rotterdam (Netherlands)
TC 34/SC 5 Food products/Milk and milk products
3-7 McLean, Virginia (USA)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
3-7 Copenhagen (Denmark)
TC 42 Photography
3-7 Milwaukee (USA) TC 69 Applications of statis-tical methods
3-7 San Francisco (USA)
TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
3-8 Warsaw (Poland) TC 96 Cranes
3-8 Paris (France) TC 184/SC 4 Automation systems and integration/Indus-trial data
4-5 Amsterdam (Netherlands)
TC 259 Project committee: Outsourcing
4-6 Copenhagen (Denmark)
TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
5 Berlin (Germany) TC 29/SC 5 Small tools/Grinding wheels and abrasives
5 Paris (France) TC 46/SC 9 Information and documentation/Identification and description
5 Prague (Czech Republic)
TC 115 Pumps
6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection
6 Milan (Italy) TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles
6 Paris (France) TC 46/SC 4 Information and documentation/Tech-nical interoperability
6 Paris (France) TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation
6-7 Milan (Italy) TC 22/SC 17 Road vehicles/Visibility
6-7 Paris (France) TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
7 Paris (France) TC 46 Information and documentation
7 Osaka (Japan) TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
10-13 London (United Kingdom)
TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
10-14 Tel Aviv (Israel) TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
11 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
11 Chantilly (USA) TC 220 Cryogenic vessels
11-12 Brugge (Belgium) TC 17/SC 17 Steel/Steel wire rod and wire products
11-12 Burr Ridge (USA) TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
ISO Update, Supplement to ISO Focus -- June 2013 17
11-13 Gothenburg (Sweden)
TC 22 Road vehicles
11-14 Sydney (Australia)
REMCO Committee on refer-ence materials
12 Munich (Germany)
TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
12-13 Burr Ridge (USA) TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors
12-13 Geneva (Switzerland)
TMB Technical Manage-ment Board
13 Atlanta (USA) TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle
13 Berlin (Germany) TC 156 Corrosion of metals and alloys
13-14 Burr Ridge (USA) TC 23 Tractors and machin-ery for agriculture and forestry
13-14 Barcelona (Spain)
TC 91 Surface active agents
14 Groenkloof (South Africa)
TC 37 Terminology and other language and content resources
14 Pretoria (South Africa)
TC 37/SC 1 Terminology and other language and content resources/Principles and methods
14 Pretoria (South Africa)
TC 37/SC 2 Terminology and other language and content resources/Terminographical and lexicographical work-ing methods
14 Pretoria (South Africa)
TC 37/SC 3 Terminology and other language and content resources/Systems to manage terminology, knowl-edge and content
14 Pretoria (South Africa)
TC 37/SC 4 Terminology and other language and content resources/Language resource management
14 Pretoria (South Africa)
TC 37/SC 5 Terminology and other language and content resources/Translation, inter-preting and related technology
14 Paris (France) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
14-15 Atlanta (USA) TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology
17-19 Delft (Netherlands)
TC 252 Project committee: Natural gas fuelling stations for vehicles
17-21 Seoul (Korea, Republic of)
JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
17-21 Bellevue (USA) JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
17-21 Shanghai (China) TC 121 Anaesthetic and res-piratory equipment
17-21 Berlin (Germany) TC 149 Cycles
18-19 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
18-19 Louvain-la-Neuve (Belgium)
TC 17/SC 11 Steel/Steel castings
18-19 Courbevoie, Paris (France)
TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
18-19 Elda (Alicante) (Spain)
TC 137 Footwear sizing des-ignations and marking systems
19 Porto de Galin-has (Brazil)
TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
19-20 Prague (Czech Republic)
TC 17/SC 12 Steel/Continuous mill flat rolled products
19-20 London (United Kingdom)
TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment
19-25 Vienna (Austria) JTC 1/SC 28 Information technol-ogy/Office equipment
21 Annweiler-Bindersbach (Germany)
TC 43/SC 2 Acoustics/Building acoustics
23-25 Calgary (Canada) TC 253 Project committee: Treated wastewater re-use for irrigation
24-26 Berlin (Germany) TC 34/SC 9 Food products/Microbiology
24-27 London (United Kingdom)
PC 278 Anti-bribery man-agement system - Requirements
24-27 Istanbul (Turkey) TC 189 Ceramic tile
24-28 Montreal (Canada)
TC 35 Paints and varnishes
24-28 Gaborone (Botswana)
TC 207 Environmental management
25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate
25-28 Delft (Netherlands)
TC 193 Natural gas
26 Montreal (Canada)
TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures
26-27 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
27 Montreal (Canada)
TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes
18 ISO Update, Supplement to ISO Focus -- June 2013
27-28 Tokyo (Japan) TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems
28 Stockholm (Sweden)
TC 51 Pallets for unit load method of materials handling
28 Espoo (Helsinki) (Finland)
TC 188 Small craft
Washington, D.C (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
July 2013
1-5 Bornholm (Denmark)
TC 268 Sustainable develop-ment in communities
2 Berlin (Germany) TC 274 Light and lighting
2-4 Bornholm (Denmark)
TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
12 Notting-ham (United Kingdom)
TC 261 Additive manufacturing
15-17 Vienna (Austria) PC 273 Customer contact centres
August 2013
5-8 Washington, D.C (USA)
TC 134 Fertilizers and soil conditioners
18 Pretoria (South Africa)
TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance
18-23 Centurion (South Africa)
TC 27 Solid mineral fuels
18-23 Centurion (South Africa)
TC 27/SC 3 Solid mineral fuels/Coke
18-23 Centurion (South Africa)
TC 27/SC 4 Solid mineral fuels/Sampling
19-23 Pretoria (South Africa)
TC 27/SC 5 Solid mineral fuels/Methods of analysis
26-30 (Canada) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2013
1-4 Moscow (Rus-sian Federation)
TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components
3-6 Hangzhou (China)
TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
4 Geneva (Switzerland)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
7-13 Moscow (Rus-sian Federation)
JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
8-13 Suzhou (China) TC 61 Plastics
9 Victoria (Canada) TC 33 Refractories
9-10 London (United Kingdom)
TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10 Paris (France) TC 26 Copper and copper alloys
9-11 Gaithersburg (USA)
TC 172/SC 9 Optics and photon-ics/Electro-optical systems
9-13 Delft (Netherlands)
* JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
9-13 Montreal (Canada)
TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
9-13 Tallberg (Sweden)
TC 258 Project, programme and portfolio management
10 London (United Kingdom)
TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
10 Paris (France) * TC 79/SC 11 Light metals and their alloys/Titanium
10-13 Stockholm (Sweden)
TC 205 Building environment design
11 London (United Kingdom)
TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
11 London (United Kingdom)
TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11 Suzhou (China) TC 61/SC 1 Plastics/Terminology
11 Suzhou (China) TC 61/SC 2 Plastics/Mechanical properties
11 Suzhou (China) TC 61/SC 5 Plastics/Physical-chemical properties
11 Suzhou (China) * TC 61/SC 10 Plastics/Cellular plastics
11 Suzhou (China) * TC 61/SC 11 Plastics/Products
11 Suzhou (China) * TC 61/SC 12 Plastics/Thermoset-ting materials
11 Paris (France) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11 Stockholm (Sweden)
TC 163/SC 2 Thermal performance and energy use in the built environment/Cal-culation methods
11 Stockholm (Sweden)
* TC 163/SC 3 Thermal performance and energy use in the built environment/Thermal insulation products
11-12 Stockholm (Sweden)
TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)
ISO Update, Supplement to ISO Focus -- June 2013 19
12 London (United Kingdom)
* TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers
12 Suzhou (China) TC 61/SC 4 Plastics/Burning behaviour
12 Suzhou (China) TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance
12 Suzhou (China) * TC 61/SC 9 Plastics/Thermoplas-tic materials
12 Suzhou (China) * TC 61/SC 13 Plastics/Composites and reinforcement fibres
12 Paris (France) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
12 Paris (France) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
12 Stockholm (Sweden)
TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
12 Stockholm (Sweden)
TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals
12 Vienna (Austria) TC 146/SC 3 Air quality/Ambient atmospheres
12 Stockholm (Sweden)
* TC 163/SC 1 Thermal performance and energy use in the built environment/Test and measurement methods
12-13 Stockholm (Sweden)
TC 163 Thermal performance and energy use in the built environment
13 London (United Kingdom)
* TC 21 Equipment for fire protection and fire fighting
13 Paris (France) TC 79 Light metals and their alloys
13 Stockholm (Sweden)
TC 119 Powder metallurgy
13 Stockholm (Sweden)
* TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)
13 Vienna (Austria) * TC 146/SC 5 Air quality/Meteorology
13 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air
13 (Germany) ** TC 244 Industrial furnaces and associated pro-cessing equipment
15-19 Paris (France) * JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology
15-20 Velsen (Netherlands)
TC 164 Mechanical testing of metals
16 Sydney (Australia)
* PC 271 Compliance programs
16-17 St. Peters-burg (Russian Federation)
* DEVCO Committee on developing countries matters
16-17 St. Peters-burg (Russian Federation)
* TMB Technical Manage-ment Board
16-20 Copenhagen (Denmark)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
16-20 London (United Kingdom)
TC 150 Implants for surgery
17 Fukuoka (Japan) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
17 Paris (France) TC 254 Safety of amusement rides and amusement devices
17-18 Jiangyin (China) TC 105 Steel wire ropes
17-18 Belo Horizonte (Brazil)
TC 155 Nickel and nickel alloys
17-19 Tokyo (Japan) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
17-19 Chengdu (China) TC 256 Pigments, dyestuffs and extenders
18 St. Peters-burg (Russian Federation)
** CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
18-20 St. Peters-burg (Russian Federation)
* GA General Assembly
19 Atlanta (USA) TC 142 Cleaning equipment for air and other gases
19 Fukuoka (Japan) * TC 190/SC 4 Soil quality/Biological methods
19-20 Graz (Austria) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
20 Fukuoka (Japan) TC 190 Soil quality
20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling
20 Fukuoka (Japan) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
20 Fukuoka (Japan) * TC 190/SC 7 Soil quality/Soil and site assessment
21 St. Peters-burg (Russian Federation)
* COUNCIL Council
23-24 Paris (France) * PC 277 Sustainable purchasing
23-27 Kobe (Japan) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
23-27 Milan (Italy) * TC 120 Leather
23-27 Milan (Italy) * TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts
23-27 Milan (Italy) * TC 120/SC 2 Leather/Tanned leather
23-27 Milan (Italy) * TC 120/SC 3 Leather/Leather products
20 ISO Update, Supplement to ISO Focus -- June 2013
23-27 Vienna (Austria) * TC 218 Timber
23-27 Chicago (USA) TC 262 Risk management
24-25 Beijing (China) TC 265 Carbon dioxide capture, transporta-tion, and geological storage
24-26 Gaithersburg (USA)
TC 172/SC 1 Optics and photon-ics/Fundamental standards
25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
25-27 Tokyo (Japan) * TC 267 Facilities management
26-27 Rotterdam (Netherlands)
TC 260 Human resource management
26-27 Toulouse (France)
* TC 264 Fireworks
27 Seoul (Korea, Republic of)
** TC 44/SC 12 Welding and allied processes/Soldering materials
27 Bromont (Québec) (Canada)
TC 153/SC 1 Valves/Design, manu-facture, marking and testing
27 Helsinki (Finland) * TC 213 Dimensional and geometrical product specifications and verification
29 Jeju (Korea, Republic of)
TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry
London (United Kingdom)
** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
(Germany) ** TC 180 Solar energy
September-October 2013
30-4 (Sweden) ** JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment
30-1 Tampere (Finland)
** TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery
30-2 Berlin (Germany) TC 34/SC 15 Food products/Coffee
October 2013
2-3 Tampere (Finland)
TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry
2-3 St. John, Newfoundland (Canada)
TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations
3-4 Chantilly (USA) * TC 58/SC 2 Gas cylinders/Cylin-der fittings
5 Incheon (Korea, Republic of)
* TC 106 Dentistry
7 Istanbul (Turkey) TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
7-8 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
7-8 Sparks, Nevada (USA)
TC 209 Cleanrooms and as-sociated controlled environments
7-9 Tokyo (Japan) * TC 70 Internal combustion engines
7-9 Tokyo (Japan) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products
7-11 Beijing (China) * CASCO Committee on con-formity assessment
7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids
7-11 Colorado Springs (USA)
TC 247 Fraud countermeas-ures and controls
8 Istanbul (Turkey) TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
8-10 Berlin (Germany) TC 59/SC 8 Buildings and civil engineering works/Sealants
9 London (United Kingdom)
* TC 8/SC 7 Ships and marine technology/Inland navigation vessels
9 Istanbul (Turkey) TC 38/SC 23 Textiles/Fibres and yarns
9-10 Seogwipo-si (Korea, Repub-lic of)
** TC 159 Ergonomics
10 Istanbul (Turkey) TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
11 Istanbul (Turkey) TC 38 Textiles
11 Garching (Germany)
** TC 60 Gears
11 Garching (Germany)
** TC 60/SC 1 Gears/Nomenclature and wormgearing
11 Garching (Germany)
** TC 60/SC 2 Gears/Gear capacity calculation
11 Venice (Italy) * TC 146/SC 2 Air quality/Workplace atmospheres
14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables
14-17 Stuttgart (Germany)
TC 165 Timber structures
14-18 Paris (France) PC 271 Compliance programs
14-18 Paris (France) * TC 2 Fasteners
14-18 Seoul (Korea, Republic of)
* TC 108 Mechanical vibration, shock and condition monitoring
15 Halifax (Canada) TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
15 La Plaine St-Denis (France)
** TC 44/SC 5 Welding and allied processes/Testing and inspection of welds
ISO Update, Supplement to ISO Focus -- June 2013 21
16 La Plaine St-Denis (France)
** TC 44/SC 9 Welding and allied processes/Health and safety
16-18 Munich (Germany)
* TC 58/SC 3 Gas cylinders/Cylin-der design
16-18 (Korea, Repub-lic of)
** TC 123 Plain bearings
16-18 (Korea, Repub-lic of)
** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
16-18 (Korea, Repub-lic of)
** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
16-18 (Korea, Repub-lic of)
** TC 123/SC 5 Plain bearings/Quality analysis and assurance
16-18 (Korea, Repub-lic of)
** TC 123/SC 6 Plain bearings/Terms and common items
16-18 (Korea, Repub-lic of)
** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
17-18 La Plaine St-Denis (France)
** TC 44 Welding and allied processes
18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles
19-20 Jacksonville (USA)
TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
21-25 Singapore (Singapore)
TC 8 Ships and marine technology
21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
21-25 Sao Paulo (Brazil)
* TC 181 Safety of toys
21-25 Sydney (Australia)
TC 215 Health informatics
21-26 Berlin (Germany) * TC 147 Water quality
22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions
23 Paris (France) * TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
23 Berlin (Germany) * TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
23 Tokyo (Japan) ** TC 206 Fine ceramics
24-25 Sarajevo (Bosnia and Herzegovina)
** TC 34/SC 12 Food products/Sen-sory analysis
24-25 Berlin (Germany) TC 173 Assistive products for persons with disability
28-29 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
28-31 Bali (Indonesia) TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)
30 Prague (Czech Republic)
* TC 266 Biomimetics
31 Bali (Indonesia) TC 45/SC 2 Rubber and rubber products/Testing and analysis
31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
(France) ** TC 111 Round steel link chains, chain slings, components and accessories
(France) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
Berlin (Germany) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
Beijing (China) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
Boulder (USA) ** TC 202 Microbeam analysis
Berlin (Germany) ** TC 263 Coalbed methane (CBM)
October-December 2013
7-11 Oslo (Norway) * TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
October-November 2013
28-1 Bali (Indonesia) TC 45 Rubber and rubber products
28-3 Berlin (Germany) * TC 130 Graphic technology
November 2013
1 Bali (Indonesia) * TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
2-9 Porto (Portugal) * TC 176 Quality management and quality assurance
4-8 Sydney (Australia)
* TC 34/SC 17 Food products/Man-agement systems for food safety
4-9 Perros-Guirec (France)
** JTC 1 Information technology
6-8 Paris (France) ** TC 275 Sludge recovery, recycling, treatment and disposal
6-9 Washington, D.C (USA)
* TC 227 Springs
7 Okinawa (Japan) * TC 201 Surface chemical analysis
7 Okinawa (Japan) * TC 201/SC 1 Surface chemical analysis/Terminology
7 Okinawa (Japan) * TC 201/SC 2 Surface chemical analysis/General procedures
7 Okinawa (Japan) * TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy
8 Delft (Netherlands)
* TC 92/SC 1 Fire safety/Fire initia-tion and growth
8 Shenzen (China) TC 160 Glass in building
22 ISO Update, Supplement to ISO Focus -- June 2013
8 Shenzen (China) * TC 160/SC 1 Glass in build-ing/Product considerations
8 Shenzen (China) * TC 160/SC 2 Glass in building/Use considerations
8 Okinawa (Japan) * TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment
8 Okinawa (Japan) * TC 201/SC 4 Surface chemi-cal analysis/Depth profiling
8 Okinawa (Japan) * TC 201/SC 7 Surface chemical analysis/Electron spectroscopies
9 Okinawa (Japan) * TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy
10-15 Mexico (Mexico) * TC 113 Hydrometry
11-15 Mexico (Mexico) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
11-15 Tokyo (Japan) * TC 98 Bases for design of structures
13 Tokyo (Japan) ** TC 110/SC 1 Industrial trucks/Gen-eral terminology
14 Tokyo (Japan) ** TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
14-15 Redlands (USA) * TC 211 Geographic in-formation/Geomatics
15 Tokyo (Japan) ** TC 110 Industrial trucks
18-20 Berlin (Germany) * TC 20 Aircraft and space vehicles
19-21 Singapore (Singapore)
* TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
20-22 Tokyo (Japan) * TC 269 Railway applications
27 Milan (Italy) ** TC 221 Geosynthetics
30 Berlin (Germany) ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts)
December 2013
12-13 Berlin (Germany) * TC 276 Biotechnology
4th Quarter 2013
New Delhi (India) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
London (United Kingdom)
** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
Month unknown 2013
Bratislava (Slovakia)
** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
January 2014
Paris (France) ** TC 17/SC 3 Steel/Steels for struc-tural purposes
February 2014
10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
(Sweden) ** TC 213 Dimensional and geometrical product specifications and verification
March 2014
11-14 London (United Kingdom)
TC 118 Compressors and pneumatic tools, ma-chines and equipment
11-14 London (United Kingdom)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
11-14 London (United Kingdom)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
13 London (United Kingdom)
* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors
13 London (United Kingdom)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings
23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
27-28 Geneva (Switzerland)
* COUNCIL Council
March-April 2014
31-4 Vienna (Austria) ** PC 271 Compliance programs
April 2014
7-11 Delft (Netherlands)
* TC 6 Paper, board and pulps
7-11 Delft (Netherlands)
* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
ISO Update, Supplement to ISO Focus -- June 2013 23
7-11 Vitoria (Brazil) * TC 102 Iron ore and direct reduced iron
7-11 Vitoria (Brazil) * TC 102/SC 1 Iron ore and direct re-duced iron/Sampling
7-11 Vitoria (Brazil) * TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis
7-11 Vitoria (Brazil) * TC 102/SC 3 Iron ore and direct reduced iron/Physical testing
7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks
7-11 Amsterdam (Netherlands)
* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
8-9 (Japan) ** TC 199 Safety of machinery
8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
14-15 Hong Kong (Hong Kong, China)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
23-24 (Europe) ** TC 167 Steel and aluminium structures
Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
May 2014
9-16 London (United Kingdom)
* TC 10 Technical product documentation
9-16 London (United Kingdom)
* TC 10/SC 1 Technical product documentation/Basic conventions
9-16 London (United Kingdom)
* TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
12-16 London (United Kingdom)
** TC 68/SC 4 Financial services/Securities and related financial instruments
14-16 Rosslyn (USA) ** TC 145 Graphical symbols
14-16 Rosslyn (USA) ** TC 145/SC 1 Graphical symbols/Public information symbols
14-16 Rosslyn (USA) ** TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
14-16 Rosslyn (USA) ** TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
15 London (United Kingdom)
* TC 68 Financial services
19-23 Berlin (Germany) ** TC 43 Acoustics
19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise
19-24 Karuizawa (Japan)
** TC 215 Health informatics
Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
Washington, D.C (USA)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
June 2014
1-6 (Sweden) ** TC 127 Earth-moving machinery
5-6 Berlin (Germany) * TC 211 Geographic in-formation/Geomatics
16-20 Incheon (Korea, Republic of)
* TC 121 Anaesthetic and res-piratory equipment
September 2014
8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
10-12 Rio de Janeiro (Brazil)
* GA General Assembly
13 Rio de Janeiro (Brazil)
* COUNCIL Council
(USA) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
Montreal (Canada)
** TC 213 Dimensional and geometrical product specifications and verification
3rd Quarter 2014
London (United Kingdom)
** TC 48 Laboratory equipment
October 2014
5-10 Berlin (Germany) ** TC 215 Health informatics
23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks
Prague (Czech Republic)
** TC 135 Non-destructive testing
November 2014
3-7 Cape Town (South Africa)
** TC 45 Rubber and rubber products
4th Quarter 2014
(Portugal) ** TC 34/SC 4 Food products/Cere-als and pulses
(South Africa) ** TC 146 Air quality
2nd Semester 2014
Madrid (Spain) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
Month unknown 2014
(USA) ** REMCO Committee on refer-ence materials
(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
(Brazil) ** TC 28 Petroleum products and lubricants
Beijing (China) ** TC 36 Cinematography
24 ISO Update, Supplement to ISO Focus -- June 2013
(Germany) ** TC 37 Terminology and other language and content resources
(Japan) ** TC 44 Welding and allied processes
(United Kingdom)
** TC 142 Cleaning equipment for air and other gases
Suzhou (China) ** TC 164 Mechanical testing of metals
(Germany) ** TC 190 Soil quality
February 2015
London (United Kingdom)
** TC 213 Dimensional and geometrical product specifications and verification
1st Quarter 2015
Foshan (China) ** TC 107 Metallic and other inorganic coatings
Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
April 2015
Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Europe) ** TC 215 Health informatics
2nd Quarter 2015
(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
3rd Quarter 2015
Sao Paulo (Brazil)
** TC 215 Health informatics
October 2015
21-25 Berlin (Germany) * TC 154 Processes, data elements and documents in com-merce, industry and administration
November 2015
(China) ** JTC 1 Information technology
Month unknown 2015
(South Africa) ** REMCO Committee on refer-ence materials
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom)
** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
April 2016
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Australia) ** TC 178 Lifts, escalators and moving walks
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Russian Federation)
** REMCO Committee on refer-ence materials
Beijing (China) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
(Australia) ** TC 44 Welding and allied processes