supercontinuum sources sc-5-fc instruction manual...fiber sensing, oct and other areas. the system...

E-mail：[email protected]

Tel：027-87204039

Supercontinuum Sources

SC-5-FC

Instruction Manual

Read this instruction manual carefully

before operating the equipment

- 1 -


Tel：027-87204039

Content

Content ..................................................................................................-1-

Product Overview ............................................................................. - 2 -

A. Introduction ................................................................................................................ - 2 -

B. Basic configuration .................................................................................................... - 2 -

C. Dimension (L*W*H) ................................................................................................. - 3 -

Product Operation ........................................................................... - 3 -

A. Unpacking and packing demonstration ...................................................................... - 3 -

B. Front panel’s function ................................................................................................ - 3 -

Remote Control ................................................................................ - 4 -

A. Software setting ......................................................................................................... - 4 -

B. Switch on the Laser .................................................................................................... - 5 -

C. Switch off the Laser ................................................................................................... - 6 -

Bluetooth Control ............................................................................ - 6 -

A. Software setting ......................................................................................................... - 6 -

B. Bluetooth Connect ..................................................................................................... - 7 -

C. Switch on the Laser .................................................................................................... - 8 -

D. Switch off the Laser ................................................................................................... - 8 -

Daily Maintenance and Storage ....................................................... - 9 -

Safety considerations ..................................................................... - 10 -

Contact Address ............................................................................. - 11 -

- 2 -


Tel：027-87204039

It is recommended to use more than 50% of the power，if

you need low power, you can via external attenuation.

The higher the power, the more stable the spectrum.

Product Overview

A. Introduction

Supercontinuum source SC-5-FC is a cost effective supercontinuum

laser with single mode FC connector output. With a total output power of

more than 800mW covering a broad spectral range of 470nm to 2200nm,

the system is an ideal light source for fiber component characterization,

fiber sensing, OCT and other areas. The system is based on self-designed

highly reliable seed laser offering unique reliability and performance. SC-

5-FC can replace the traditional ASE, SLD and Lamp systems in many

applications.

B. Basic configuration

1 SC-5-FC （1）

2 Power adapter （1）

3 Power wire （1）

4 Interlock plug （1）

5 Flanges （1）

6 Fiber Optic Patch Cables （1）

7 USB cable （1）

- 3 -


Tel：027-87204039

8 USB disc （1）

9 Bluetooth （1）

10 Instruction manual （1）

11 Test report （1）

C. Dimension (L*W*H)

300*245*70 mm

Product Operation

A. Unpacking and packing demonstration

B. Front panel’s function

Cables

Machine Output Fiber Interlock

- 4 -


Tel：027-87204039

a) Interlock : Connect the Interlock (as following) when use the Laser;

b) USB: Connect the computer to control the Laser;

c) Bluetooth: To connect the Mobile equipment to control the Laser;

d) Power Interface: Connect the Power Adapter;

e) Output: the Laser output.

Cautions:

Please increase or decrease the power gradually to the

maximum or minimum.

Remote Control

A. Software setting

Before the operation, you should install the Laser USB driver, connect

Interlock Bluetooth USB Power Interface Output

- 5 -


Tel：027-87204039

the Power Adapter and the Interlock and make sure the USB cable

communicated well.

a) Open the software as follow;

b) You could see the operational window.

B. Switch on the Laser

a) Take off the protection cap of output fiber;

b) Click the “Laser On”, Replied “Laser on”;

c) Input Power from 0% →30%→50% →80%→100%

gradually, and click the “Setting” every time, Replied

“Power set”;

- 6 -


Tel：027-87204039

C. Switch off the Laser

a) Decrease the power from 100%→80%→50%→30%→0%

gradually, and click the “Setting” every time; Replied

“Power set”;

b) Click the “Laser off”;

c) Take on the protection cap of output fiber;

d) Please disconnect the Power Adapter and Interlock while it’s

in idle state for a long time.

Bluetooth Control

A. Software setting

Bluetooth Control APP：

a) Find the “YSL-APP.apk” in the UBS disk, install in your

mobile or pad;

b) Download APP in this website：

http://www.yslphotonics.com/info.asp?classid=40

c) Or scan the two-dimensional code to download the APP:

http://www.yslphotonics.com/info.asp?classid=40

http://cn.bing.com/dict/clientsearch?mkt=zh-CN&setLang=zh&form=BDVEHC&ClientVer=BDDTV3.5.0.4311&q=%E4%BA%8C%E7%BB%B4%E7%A0%81



http://pan.baidu.com/s/1c1v38J2

- 7 -


Tel：027-87204039

B. Bluetooth Connect

a) Connect the Bluetooth, enter the password:1234, the Open the

software as follow;

- 8 -


Tel：027-87204039

You could see the operational window.

C. Switch on the Laser

a) Take off the protection cap of output fiber;

b) Click the “On/OFF”, Replied “Laser on”;

c) Input Power from 0% →30%→50% →80%→100%

gradually;

D. Switch off the Laser

a) Decrease the power from 100% →80% →50%

→30% →0% gradually;

b) Click the “On/OFF”;

c) Take on the protection cap of output fiber;

d) Please disconnect the Power Adapter and Interlock

while it’s in idle state for a long time.

- 9 -


Tel：027-87204039

Failure Alarm

Alarm description:

Error 1-5: circuit module alarm

Error 6: frequency alarm

Error 7: temperature alarm

Error 8: InterLock alarm

Contact us immediately when the following happens:

Product Parameters

A. Electrical characteristics

INPUT：100～240VAC 50/60Hz 2A

Power dissipation：100～130W

B. Optical characteristics

Please see the test report for details.

Daily Maintenance and Storage

A. Clean and maintenance

Please cover the output head with the dust-cap while it’s in idle to avoid

dust pollution;

Keep the laser body clean, don’t let the body and power adapter touch

water.

B. Storage conditions

- 10 -


Tel：027-87204039

Temperature: 25 ℃ (± 20 ℃), humidity: 60% or less.

C. Operation condition

Temperature: 25 ℃ (± 5 ℃), humidity: 60% or less.

Safety considerations

a) Strong reflected laser beam back into the SC output may

damage the SC;

b) Don’t look at the emission port at any time in any case;

c) Don’t put things in the air passage in case it’s clogged;

d) Don’t place heavy objects on the laser;

e) Don’t put the output toward people or any other reflective

surface in case causing any personal injury;

f) Don’t check the laser directly with your eyes unless you sure the

device is in power-down state while the laser may lunch infrared

and ultraviolet light invisible but harmful to your eyes;

g) Be sure that the laser is out of power before checking the device;

h) Don’t stare at the emission port directly even you wear the laser

protective glasses;

i) Don’t put any low ignition substance on the laser such as the

flammable, explosive materials etc;

j) Be sure that the laser is placed in non-professionals can’t touch;

k) Don’t shoot the laser light to the glass since the normal glass

with about 4% reflectivity and reflect light back to your eyes to

- 11 -


Tel：027-87204039

cause harm;

l) Please take off your watch when you use the laser in case the

watch surface reflecting light into your eyes;

m) Please use a detector or conversion film to locate the laser light

since the light beyond 800nm is totally invisible;

n) We strongly recommend that you should wear a pair of laser

goggles corresponding to laser in specific wavelength to protect

your eyes when you using the laser for working;

o) We recommend that you wear a long suit of white clothes. For it

will not burn your clothes then cause a fire even the laser irradiate

to your body.

Contact Address

Wuhan Yangtze Soton Laser Co., Ltd.

80# Fifth Hi-tech Avenue, East Lake Hi-tech Development Zone,

Wuhan, P.R. China

Tel: +86 27 87204039 Fax: +86 27 87179217


Web: http://www.yslphotonics.com

mailto:[email protected]

http://www.yslphotonics.com/

supercontinuum sources sc-5-fc instruction manual...fiber sensing, oct and other areas. the system...

Documents