SUMMIT™ SELECT ALL-IN-ONE HARDWOOD ADHESIVETHE SUMMIT SELECT ADVANTAGESummit™ Select from Armstrong® Flooring is a premium adhesive designed to withstand the highest levels of moisture. Installations over concrete require no subfloor moisture testing. In addition, Summit Select aids with sound transmission reduction and subfloor crack isolation.

• Install hardwood with confidence over high moisture substrates • No concrete moisture testing required - No RH limit • An All-in-One hardwood adhesive solution - Strong bonding – early grab strength plus adhesion builds over time - Sound diminishing – exceeds IIC & STC requirements - Moisture barrier – limits moisture vapor transmission - Crack membrane – up to 1/8” • Quick & easy application and clean up • Clip-on trowel included in each pail • No open time required and longer working time allowed for installation • Non-urethane formula contains no solvents, water, isocyanates or hazardous ingredients • Cradle-to-Cradle™ Silver certified • FloorScore® certified for low VOC emissions

Artesian Hand-Tooled- Artesian Harvest

F-10105-118 Armstrong and the Armstrong logo are trademarks of AWI Licensing LLC. All other trademarks are owned by Armstrong Flooring, Inc. or its subsidiaries. © 2017 AFI Licensing LLC.NOTE: Due to printing limitations, colors pictured cannot be guaranteed to match actual flooring material.

PRODUCT INFORMATION

ITEM NUMBER SUMTS418

SIZE 4 gallon pail

SPREAD RATE50-60 sq. ft/gal (standard application)30-35 sq. ft./gal. (All-in-One application using included trowel blade)

SUBFLOORS

On, above, or below grade concrete; suspended wood and wood underlayments; existing well-bonded resilient flooring; properly mixed and applied powder cementitious underlayments; radiant-heated subfloors where surface temperature does not exceed 85° F (29° C) and more. (visit floorexpert.com for complete installation instructions)

OPEN TIME None – install wood flooring immediately after adhesive is spread

WORKING TIME Approximately 50-75 minutes

RH LIMIT No RH limit (no concrete moisture testing required)

USE WITHEngineered hardwood, solid parquet hardwood, laminate and more. (visit floorexpert.com for complete installation instructions)

SUMMIT™ SELECT ALL-IN-ONE HARDWOOD ADHESIVENO RELATIVE HUMIDITY (RH) TESTING REQUIRED.