submit tal for chair
TRANSCRIPT
-
7/25/2019 Submit Tal for chair
1/7
AL BALAGH TRADING AND CONTRACTING CO WLL
PO 5777-DOHA-QATAR
PH 44667714
MATERIAL SUBMITTAL
Smoke and Acoustic Sealant
AUDITORIUM SEATING
-
7/25/2019 Submit Tal for chair
2/7
1. Basis of Submittal, Specification & Scope, BOQ and Drawing
1. For Auditorium Seating system. Layout was previously
submitted and was approved. This submittal for new type
seating system as the specified one was not approved due to
the metal parts that are visible. Site visit was made for thistype of seat and tentatively this type was approved and
addition informations was requested.
2. BOQ - S24 - Page 3 Item J
3. IFC Drawing A101 & A102
2. Material Proposed
1. Product : EURO SEATING ARGENTINA SEATS2. Manufacture r : EURO SEATING
3. Origin : From Europe Spain
4. Fixation : By Al Balagh
5. Fabric : FIDIVI Italy
6. Fabric Selection : Brown Color As per Sample which
was selected and as instructed to us to follow
-
7/25/2019 Submit Tal for chair
3/7
3. Reply to Comments
KEO Comment
-
7/25/2019 Submit Tal for chair
4/7
Our Reply
Sl No Comment Our Response Compliance
1Submit CompleteCatalogue and PQDof Local Agent
We had submitted PQD ofAl Balagh Trading Divisionalong with the previousSubmittal and wereapproved. No change inthe Supplier,
Complies
2Full TechnicalComparison of theSpecified andProposed Seating
Included Complies
3Comply with fabricPreviously approved
We have given same colorand Material for the fabric.Please refer to Sample -1.Fabric from FIDIVI Italy
compiles
4Confirm the numberof seat
Provided detailed layout of
Auditorium. This layoutwas submitted previouslyand was approved by KEO
Complies
-
7/25/2019 Submit Tal for chair
5/7
4. Technical Comparison b/w the specified and proposed seats
DescriptionFor Euro seating
ArgentinaProposed Type
For Seating ConceptMeridian
Specified Type
Seat Centre 52 cm Varies.
Overall Height 95 cm Up to 101 cm
BackUni-Block II UpholsterySystem. TexturedPolypropylene Outer Back
High Impact Polypropylene
Seat
Fixed with Double Spring.Uni-Block II UpholsterySystem. TexturedPolypropylene withperforations for Acoustic
Seats fixed with Steel partsfinished with powdercoating.Textured Polypropylene withfabric
StandardStrengthened andTextured Polypropylene
Upholstery System withfabric
Arm RestInjected and TexturedPolypropylene
Wood veneer
PolyurethaneForm
Seat density : 65 Kg/ CumBack density : 54 Kg/ Cum
NA
Polypropylene PPR 1042 California TB 117
Resistance toTethering
DIN 53455 NA
Resistance toImpact
DIN 53455 NA
Resistance toBending
DIN 53455 NA
Volume0.13 CuM whendismantled
NA
Weight 16.8 Kg NA
Data sheetOriginal catalogueincluded. Test reports forthe material also included
WarrantyAs per ProjectRequirements
As per ProjectRequirements
Note: These Data has been taken from the Original Catalogues
-
7/25/2019 Submit Tal for chair
6/7
5. Photo of Selected Seat ( Physical Sample included)
-
7/25/2019 Submit Tal for chair
7/7
6. Enclosures
1. Sample of Seat back rest Module with the selected fabric and
pattern as proposed
2. Standard Detail and seat dimension
3. Compliance Statement from the manufacturer4. Catalogues. Original catalogue one copy also included
5. Letter from Manufacturer Authorizing Al Balagh
6. Test Reports and PQD of Manufacturer
7. Unpriced BOQ
8. Seating Layout in Auditorium