WALKER® FLOOR

BOXES

STILLLOOKINGAT FLOORBOXESIN THE

SAME OLDWAY?

www.wiremold.com

Wiremold/Legrand60 Woodlawn StreetWest Hartford, CT 06110Telephone: 1-800-621-0049Fax: 1-860-232-2062

In Canada570 Applewood CrescentVaughan, Ontario L4K 4B4Telephone: 1-800-723-5175Fax: 1-905-760-1733

Infloor Open Space

Overhead In-Wall

Power & Data QualityFirestopping

Perimeter

©2007 Wiremold/Legrand All Rights Reserved ED933R3 1207

Walker Floor BoxSystems are part of ourcomplete end-to-endwire and cablemanagement solutions.

Then you’re missing the big picture.

UPDATED FLOORPORT™ COVER DESIGN

LARGER CAPACITY A/V FLOOR BOXESNEWALUMINUMCOVERS

800 Series Floor Box

Omnibox™ Floor Box

Wood Floor Box

Omnibox™ Floor Box

Modulink™ Nonmetallic Rectangular Floor Box

Omnibox™ Floor Box

880 Series Floor Box

Think a floor box is a floor box is a floor box? Think again. And again. And again. Wiremold/Legrand offers a diverseline of Walker floor boxes that combine capability, durability, flexibility, ease of installation and infloor elegance.Whatever your floor, whatever your application, there’s a Walker floor box to fit it. And only Wiremold® designengineers could come up with unique features that make Walker floor boxes easy to level, easy to trim, easy to“gang” together and easy to adapt to virtually any future wiring scenario.

And now, Walker floor boxes feature TopGuard™ protection that exceeds the 2003 UL scrub waterstandards. The TopGuard barrier secures both the electrical outlets and the communications connectorsfrom water, dust and other debris.

Start looking at infloor wire management in a whole new light – with Walker floor boxes from Wiremold/Legrand.

Wood Floor Box

Modulink™ Nonmetallic Rectangular Floor Box

880 Series Floor Box

Modulink™ Nonmetallic RectangularFloor Box

Omnibox™ Floor Box880 Series Floor Box

RFB9 A/V Floor Box

Ratchet-Pro™ Round PVC Floor Box

861 Wood Floor Box Series

RFB11 A/V Floor Box

Shallow Resource RFB® Floor BoxCast Iron Resource RFB® Floor Box

Ratchet-Pro™ Round PVC Floor Box

Gang up on your toughest applications with the new ModulinkNonmetallic Rectangular Floor Box – a flexible, cost-effectivesolution for bringing high-capacity power and communicationsto your job. Just one box can be used for a variety of job siterequirements, so there’s no need to stock multiple floor boxes.Simply slide boxes together and connect by using the uniquedovetail slots to create one-, two-, or three-gang applications.The unique one-piece design makes it easy to install andcompletely watertight. And a one-of-a-kind ratcheting feature

lets you quickly level and attach the activation without usingglue or other mechanical fasteners. All these features add upto 20% to 34% labor savings versus competing floor boxes in atwo-gang application.

Additional Modulink floor box features include:• Interior cubic inch/volume capacity marks for any trim height.• Can be used down to 31/2" of concrete depth and acceptsconduit from 1/2" to 11/4" – the largest range of capacity cablingfeeds in the industry.

• Datacom connectivity options. Accepts industry standard andproprietary devices from a wide range of manufacturers toprovide a seamless and aesthetically pleasing interface forvoice, data, audio and video applications at the point-of-use.

• Unique fiber optic storage loop provides bend radius control.• Compatible with all Walker “B” Series brass and brushedaluminum fittings, as well as rectangular polycarbonatefittings, which provide a common appearance with WalkerOmnibox™ floor boxes as well as ®Walkerduct Pro Seriesunderfloor duct.

Modulink

Nonm

etallicRectangular

FloorBox

Can be configured in single-,double-, or triple-gang.

Walker floor boxes are ideal for both low- and high-densityapplications, and for providing cost-effective wire and cablemanagement in open space areas. While traditional floor boxesdon’t allow for much job-specific selection, Walker floor boxesare designed to fit almost any project, and any decor. To determinewhich floor boxes are best for your job, consider the following:

Workstation RequirementsStart by determining which services are required at the workstation.If the workstation requires power but not communications, then asingle-gang box is needed. If multiple services are required, multi-gang boxes must be used, and it’s also necessary to determine howmany communications jacks are needed, and whether they will bemounted flush or recessed.

AestheticsAfter determining your workstation requirements, choose floorbox covers that support those needs – and the aesthetics of the job.Walker floor boxes accommodate a wide array of covers, enablingyou to easily fit any application to any decor, while providing auniform appearance throughout the entire job. Both round andrectangular covers are available.

Round covers are available in:• solid brass• painted zinc die-cast in gray, black and ivory• nonmetallic in black, gray, ivory, bronze and aluminum

Rectangular covers are available in:• solid brass and brushed aluminum• nonmetallic in black and brown

Job Specific Conditions:When choosing the right floor box, it’s also important to considerthe specific job requirements. If the application is on-grade, a castiron floor box or an approved on-grade stamped steel floor boxmay be needed. If the application is above-grade, a stamped steelbox may be appropriate. Nonmetallic floor boxes can be used as acost-effective alternative to stamped steel or cast iron when budgetconstraints are an issue. And for various depth concrete pours, floorboxes are available in both shallow and deep versions. Also, makesure the floor box has the required space or depth to accommodatepower and communications requirements and can support coversthat match the project’s aesthetics.

All these factors must be considered when choosing a floor box.The next sections of this brochure will guide you through each ofthe Walker floor box systems and their individual capabilities.

Beforechoosing afloor box,know yourneeds.

Modulink™ Floor Box

3-gang brass cover features powerand communications.

Datacom options.

Ratchet designprovides quickleveling.

Fiber storage loopmaintains bendradius capability.

Gang up on your toughest applications with the new ModulinkNonmetallic Rectangular Floor Box – a flexible, cost-effectivesolution for bringing high-capacity power and communicationsto your job. Just one box can be used for a variety of job siterequirements, so there’s no need to stock multiple floor boxes.Simply slide boxes together and connect by using the uniquedovetail slots to create one-, two-, or three-gang applications.The unique one-piece design makes it easy to install andcompletely watertight. And a one-of-a-kind ratcheting feature

lets you quickly level and attach the activation without usingglue or other mechanical fasteners. All these features add upto 20% to 34% labor savings versus competing floor boxes in atwo-gang application.

Additional Modulink floor box features include:• Interior cubic inch/volume capacity marks for any trim height.• Can be used down to 31/2" of concrete depth and acceptsconduit from 1/2" to 11/4" – the largest range of capacity cablingfeeds in the industry.

• Datacom connectivity options. Accepts industry standard andproprietary devices from a wide range of manufacturers toprovide a seamless and aesthetically pleasing interface forvoice, data, audio and video applications at the point-of-use.

• Unique fiber optic storage loop provides bend radius control.• Compatible with all Walker “B” Series brass and brushedaluminum fittings, as well as rectangular polycarbonatefittings, which provide a common appearance with WalkerOmnibox™ floor boxes as well as ®Walkerduct Pro Seriesunderfloor duct.

Modulink

Nonm

etallicRectangular

FloorBox

Can be configured in single-,double-, or triple-gang.

Walker floor boxes are ideal for both low- and high-densityapplications, and for providing cost-effective wire and cablemanagement in open space areas. While traditional floor boxesdon’t allow for much job-specific selection, Walker floor boxesare designed to fit almost any project, and any decor. To determinewhich floor boxes are best for your job, consider the following:

Workstation RequirementsStart by determining which services are required at the workstation.If the workstation requires power but not communications, then asingle-gang box is needed. If multiple services are required, multi-gang boxes must be used, and it’s also necessary to determine howmany communications jacks are needed, and whether they will bemounted flush or recessed.

AestheticsAfter determining your workstation requirements, choose floorbox covers that support those needs – and the aesthetics of the job.Walker floor boxes accommodate a wide array of covers, enablingyou to easily fit any application to any decor, while providing auniform appearance throughout the entire job. Both round andrectangular covers are available.

Round covers are available in:• solid brass• painted zinc die-cast in gray, black and ivory• nonmetallic in black, gray, ivory, bronze and aluminum

Rectangular covers are available in:• solid brass and brushed aluminum• nonmetallic in black and brown

Job Specific Conditions:When choosing the right floor box, it’s also important to considerthe specific job requirements. If the application is on-grade, a castiron floor box or an approved on-grade stamped steel floor boxmay be needed. If the application is above-grade, a stamped steelbox may be appropriate. Nonmetallic floor boxes can be used as acost-effective alternative to stamped steel or cast iron when budgetconstraints are an issue. And for various depth concrete pours, floorboxes are available in both shallow and deep versions. Also, makesure the floor box has the required space or depth to accommodatepower and communications requirements and can support coversthat match the project’s aesthetics.

All these factors must be considered when choosing a floor box.The next sections of this brochure will guide you through each ofthe Walker floor box systems and their individual capabilities.

Beforechoosing afloor box,know yourneeds.

Modulink™ Floor Box

3-gang brass cover features powerand communications.

Datacom options.

Ratchet designprovides quickleveling.

Fiber storage loopmaintains bendradius capability.

Ratchet-Pro

Nonmetallic

Round

FloorBox

Yesterday, an exhibit room. Today, a banquet hall.Tomorrow, twenty different conference rooms. Whenyour building changes fast, you need a floor box thatchanges faster. Such as the Resource RFB floor box –a versatile activation solution ideal for areas withdifferent needs at different times. The RFB Seriesprovides independent wiring compartments for power,communications and audio/video services to open spaceareas or directly to workstations. RFB floor boxes offerunsurpassed flexibility and a wide range of configurations,thanks to independent wiring compartments and feed-through wiring capability.

Four different versions available:• Stamped steel for above-grade applications where theminimum concrete pour is at least 31/2" [89mm].

• Shallow stamped steel for reduced depth, above-gradepours where the minimum concrete depth is at least21/2" [64mm].

• Cast iron for on-grade applications where the minimumconcrete pour is 31/2" [89mm].

• High-capacity stamped steel for applications wherehigher load requirements and high-density devicerequirements provide up to 11 gangs.

Additional RFB Series features include:• FloorPort activation covers that provide TopGuardprotection against water, dirt and other debris. Exceedsthe 2003 UL scrub water standards by protecting boththe power and communications connectors from theentrance of scrub water.*

• All four versions fully adjustable before and after theconcrete pour to reduce labor time and costs to meetthe most demanding capacity requirements.

• Available with a wide range of conduit knock-out sizesto meet various project requirements.

• Wide variety of mounting brackets available to adapt tomost power, communications and audio/video needs.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a wide range ofmanufacturers to provide a seamless and aestheticallypleasing interface for voice, data, audio and videoapplications at the point-of-use.

* UL Listed for tile, terrazzo, carpet and wood floor finishes.

Resource

RFB

FloorBox

Clever. Smart. Ingenious. Just a fewwords that might spring to mindwhen you work with the Ratchet-ProNonmetallic round floor box. With aremovable divider that allows fordual service, a unique ratchetingsystem that makes post-pourleveling a breeze, and interiorcubic inch markings that eliminateguesswork and time-consumingcalculations, there’s no easier wayof providing both power and low-voltage to open space areas. Infact, ease of installation makesthe Ratchet-Pro 44% to 57%faster to install on dual-serviceapplications than the competition.Flush covers ensure low-profile,aesthetic installations, and since theRatchet-Pro also accepts poke-thrustyle covers, a common appearancecan be achieved for both floor boxesand poke-thru devices.

Additional Ratchet-Pro features include:• “Dead-front” protection provided with poke-thrustyle covers that have power receptacle covers thatsnap back into place when not in use to keep dirtand debris out of device.

• Ratchet adjusting ring that allows for quick andeasy installation without gluing.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a widerange of manufacturers to provide a seamlessand aesthetically pleasing interface for voice, data,audio and video applications at the point-of-use.

• 881CTC & 897CTC Series covers provide slide coversto protect communications jacks when not in use.

• Parallel conduit hubs which allow for parallel powerand communications cable feeds, and reduce laborand material costs by eliminating the need for90 degree bends.

• Four 1" conduit hubs for greater capacity.• Individual conduit reducers and conduit plugs.

Dual service available withbrass covers.

Ratchet adjusting ring. Interior cubic inch capacitymarkings.

Ratchet-Pro installed in concrete.

Available with poke-thrustyle cover assemblies.

RFB11 Series Large Capacity Floor Box

Ratchet-Pro™ Floor Box

RFB4-SS Floor Box

RFB9 Series Large Capacity Floor Box

RFB4-CI-1 Floor Box

Ratchet-Pro

Nonmetallic

Round

FloorBox

Yesterday, an exhibit room. Today, a banquet hall.Tomorrow, twenty different conference rooms. Whenyour building changes fast, you need a floor box thatchanges faster. Such as the Resource RFB floor box –a versatile activation solution ideal for areas withdifferent needs at different times. The RFB Seriesprovides independent wiring compartments for power,communications and audio/video services to open spaceareas or directly to workstations. RFB floor boxes offerunsurpassed flexibility and a wide range of configurations,thanks to independent wiring compartments and feed-through wiring capability.

Four different versions available:• Stamped steel for above-grade applications where theminimum concrete pour is at least 31/2" [89mm].

• Shallow stamped steel for reduced depth, above-gradepours where the minimum concrete depth is at least21/2" [64mm].

• Cast iron for on-grade applications where the minimumconcrete pour is 31/2" [89mm].

• High-capacity stamped steel for applications wherehigher load requirements and high-density devicerequirements provide up to 11 gangs.

Additional RFB Series features include:• FloorPort activation covers that provide TopGuardprotection against water, dirt and other debris. Exceedsthe 2003 UL scrub water standards by protecting boththe power and communications connectors from theentrance of scrub water.*

• All four versions fully adjustable before and after theconcrete pour to reduce labor time and costs to meetthe most demanding capacity requirements.

• Available with a wide range of conduit knock-out sizesto meet various project requirements.

• Wide variety of mounting brackets available to adapt tomost power, communications and audio/video needs.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a wide range ofmanufacturers to provide a seamless and aestheticallypleasing interface for voice, data, audio and videoapplications at the point-of-use.

* UL Listed for tile, terrazzo, carpet and wood floor finishes.

Resource

RFB

FloorBox

Clever. Smart. Ingenious. Just a fewwords that might spring to mindwhen you work with the Ratchet-ProNonmetallic round floor box. With aremovable divider that allows fordual service, a unique ratchetingsystem that makes post-pourleveling a breeze, and interiorcubic inch markings that eliminateguesswork and time-consumingcalculations, there’s no easier wayof providing both power and low-voltage to open space areas. Infact, ease of installation makesthe Ratchet-Pro 44% to 57%faster to install on dual-serviceapplications than the competition.Flush covers ensure low-profile,aesthetic installations, and since theRatchet-Pro also accepts poke-thrustyle covers, a common appearancecan be achieved for both floor boxesand poke-thru devices.

Additional Ratchet-Pro features include:• “Dead-front” protection provided with poke-thrustyle covers that have power receptacle covers thatsnap back into place when not in use to keep dirtand debris out of device.

• Ratchet adjusting ring that allows for quick andeasy installation without gluing.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a widerange of manufacturers to provide a seamlessand aesthetically pleasing interface for voice, data,audio and video applications at the point-of-use.

• 881CTC & 897CTC Series covers provide slide coversto protect communications jacks when not in use.

• Parallel conduit hubs which allow for parallel powerand communications cable feeds, and reduce laborand material costs by eliminating the need for90 degree bends.

• Four 1" conduit hubs for greater capacity.• Individual conduit reducers and conduit plugs.

Dual service available withbrass covers.

Ratchet adjusting ring. Interior cubic inch capacitymarkings.

Ratchet-Pro installed in concrete.

Available with poke-thrustyle cover assemblies.

RFB11 Series Large Capacity Floor Box

Ratchet-Pro™ Floor Box

RFB4-SS Floor Box

RFB9 Series Large Capacity Floor Box

RFB4-CI-1 Floor Box

OmniboxMultiserviceFloorBox

Multiple services. Open spaces. It takes a versatilefloor box to bring them together. A floor box like theOmnibox Series – a flexible, large-capacity floor boxoffering one-, two-, or three-gang multiservicecapability that meets the workstation needs of eventhe most advanced applications. The easy-to-installOmnibox Series provides solutions for on-grade andabove-grade applications with a cast iron box, andprovides an above-grade solution with a stampedsteel version.

Two versions available for different depth and wiringcapacity requirements:• Shallow for minimum concrete depth of 21/2" [64mm].• Deep for a minimum concrete depth of 31/2" [89mm].

Additional Omnibox Series features and benefitsinclude:• Fully adjustable before and after the concrete pourto reduce labor time and costs.

• Flush brass, brushed aluminum or nonmetallicactivation covers match Modulink NonmetallicFloor Box, Rectangular Wood Floor Box Series andWalkerduct Pro Series underfloor duct activations,for a uniform and aesthetic appearance.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a widerange of manufacturers to provide a seamless andaesthetically pleasing interface for voice, data,audio and video applications at the point-of-use.

The Omnibox Series floor box is ideal for multiple service openspace applications, such as schools, financial institutions, retailenvironments and commercial office buildings.

880Series

FloorBox

Modular connectivity inserts installed using new 829PFLindividual flip lid cover.

Omnibox™ Series

Bring power or communications directly to the workstationwith the 880 Series – a full line of versatile, single-servicefloor boxes available with flush, low-profile brass ornonmetallic activation covers.

Other features include:• Activation covers which accommodate single or duplexreceptacles to meet exact customer power requirements.

• Pre- and post-pour adjustability and leveling to reducelabor time and cost.

• Available in stamped steel for above-grade applicationsand cast-iron construction for on-grade applications.

• Supported by a complete line of covers that accommodatesvarious receptacles, communications options and finishes.

Two versions available for different depth and wiringcapacity requirements:• Shallow for minimum concrete depth of 21/2" [64mm].• Deep for a minimum concrete depth of 31/2" [89mm].

880 Series

OmniboxMultiserviceFloorBox

Multiple services. Open spaces. It takes a versatilefloor box to bring them together. A floor box like theOmnibox Series – a flexible, large-capacity floor boxoffering one-, two-, or three-gang multiservicecapability that meets the workstation needs of eventhe most advanced applications. The easy-to-installOmnibox Series provides solutions for on-grade andabove-grade applications with a cast iron box, andprovides an above-grade solution with a stampedsteel version.

Two versions available for different depth and wiringcapacity requirements:• Shallow for minimum concrete depth of 21/2" [64mm].• Deep for a minimum concrete depth of 31/2" [89mm].

Additional Omnibox Series features and benefitsinclude:• Fully adjustable before and after the concrete pourto reduce labor time and costs.

• Flush brass, brushed aluminum or nonmetallicactivation covers match Modulink NonmetallicFloor Box, Rectangular Wood Floor Box Series andWalkerduct Pro Series underfloor duct activations,for a uniform and aesthetic appearance.

• Datacom connectivity options. Accepts industrystandard and proprietary devices from a widerange of manufacturers to provide a seamless andaesthetically pleasing interface for voice, data,audio and video applications at the point-of-use.

The Omnibox Series floor box is ideal for multiple service openspace applications, such as schools, financial institutions, retailenvironments and commercial office buildings.

880Series

FloorBox

Modular connectivity inserts installed using new 829PFLindividual flip lid cover.

Omnibox™ Series

Bring power or communications directly to the workstationwith the 880 Series – a full line of versatile, single-servicefloor boxes available with flush, low-profile brass ornonmetallic activation covers.

Other features include:• Activation covers which accommodate single or duplexreceptacles to meet exact customer power requirements.

• Pre- and post-pour adjustability and leveling to reducelabor time and cost.

• Available in stamped steel for above-grade applicationsand cast-iron construction for on-grade applications.

• Supported by a complete line of covers that accommodatesvarious receptacles, communications options and finishes.

Two versions available for different depth and wiringcapacity requirements:• Shallow for minimum concrete depth of 21/2" [64mm].• Deep for a minimum concrete depth of 31/2" [89mm].

880 Series

800Series

FloorBox

The Walker Wood Floor Box Series is ideal for bringingpower and communications to wood floor applications –even in the largest areas. Available in round die-castaluminum or rectangular steel versions, Walker Woodfloor boxes accommodate multiple services with easeand can be used in any wood frame construction. Therectangular version offers the flexibility and capacity ofone-, two-, or three-gang configurations.

Additional Wood Floor Box Series features include:• Rectangular version accepts industry standard andproprietary devices from a wide range of manufacturersto provide a seamless and aesthetically pleasinginterface for voice, data, audio and video applicationsat the point-of-use.

• Rectangular steel version features flush activationassembly and a variety of activation covers to providean aesthetic appearance.

• Round die-cast aluminum version features flushcover plates in brass, polycarbonate and zinc die-castmaterials, to match any decor.

Conquer wide open spaces with the 800Series floor box – an ideal, economicalsolution for bringing low density power orcommunications to even the largest areas.Suitable for both on- or above-gradeapplications, the 800 Series provides anaesthetic, low-profile appearance thatallows you to activate your wiring withoutobstructions.

Features also include:• Compatible with datacom connectivityinserts when used with the 505 Seriesservice fitting.

• Interchangeable activation coversavailable for both cast iron and stampedsteel, to match any decor.

• Covers available in flush or pedestal types.• Available in stamped steel for above-gradeapplications and cast-iron construction foron-grade applications.

Rectangular

&Round

Wood

FloorBox

800 series with carpet flange cover.

800 series with standard cover.

Two-gang brass cover installed in wood floor.

800 Series Wood Floor Series

800Series

FloorBox

The Walker Wood Floor Box Series is ideal for bringingpower and communications to wood floor applications –even in the largest areas. Available in round die-castaluminum or rectangular steel versions, Walker Woodfloor boxes accommodate multiple services with easeand can be used in any wood frame construction. Therectangular version offers the flexibility and capacity ofone-, two-, or three-gang configurations.

Additional Wood Floor Box Series features include:• Rectangular version accepts industry standard andproprietary devices from a wide range of manufacturersto provide a seamless and aesthetically pleasinginterface for voice, data, audio and video applicationsat the point-of-use.

• Rectangular steel version features flush activationassembly and a variety of activation covers to providean aesthetic appearance.

• Round die-cast aluminum version features flushcover plates in brass, polycarbonate and zinc die-castmaterials, to match any decor.

Conquer wide open spaces with the 800Series floor box – an ideal, economicalsolution for bringing low density power orcommunications to even the largest areas.Suitable for both on- or above-gradeapplications, the 800 Series provides anaesthetic, low-profile appearance thatallows you to activate your wiring withoutobstructions.

Features also include:• Compatible with datacom connectivityinserts when used with the 505 Seriesservice fitting.

• Interchangeable activation coversavailable for both cast iron and stampedsteel, to match any decor.

• Covers available in flush or pedestal types.• Available in stamped steel for above-gradeapplications and cast-iron construction foron-grade applications.

Rectangular

&Round

Wood

FloorBox

800 series with carpet flange cover.

800 series with standard cover.

Two-gang brass cover installed in wood floor.

800 Series Wood Floor Series

WALKER® FLOOR

BOXES

STILLLOOKINGAT FLOORBOXESIN THE

SAME OLDWAY?

www.wiremold.com

Wiremold/Legrand60 Woodlawn StreetWest Hartford, CT 06110Telephone: 1-800-621-0049Fax: 1-860-232-2062

In Canada570 Applewood CrescentVaughan, Ontario L4K 4B4Telephone: 1-800-723-5175Fax: 1-905-760-1733

Infloor Open Space

Overhead In-Wall

Power & Data QualityFirestopping

Perimeter

©2007 Wiremold/Legrand All Rights Reserved ED933R3 1207

Walker Floor BoxSystems are part of ourcomplete end-to-endwire and cablemanagement solutions.