step by step installation instructions solar & roller …

Solar & Roller ShadesSTEP BY STEP INSTALLATION INSTRUCTIONS

Motivia™

MotorizationWand Control

1 2smithandnoble.com 800.248.8888

Table of Contents

Step 1 - Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Overview - Motorization with No Headrail . . . . . . . . . . . . . . . . . . . . 4Step 2 - Mounting the Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Step 3 - Attaching the Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Step 4 - Hanging the Shade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview - Motorization with Cassette/2 on 1 Headrail . . . . . . . . . . . . 9 Step 2 - Mounting the Brackets . . . . . . . . . . . . . . . . . . . . . . . 10-11Step 3 - Hanging the Shade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Overview - Motorization with Metal Valance . . . . . . . . . . . . . . . . . 13 Step 2 - Mounting the Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . 14Step 3 - Attaching the Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 4 - Hanging the Shade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Step 5 - Attaching the Valance . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Operating the Wand Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Adjusting Shade Limits . . . . . . . . . . . . . . . . . . . . . . . . . . 19Optional — Hold down brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Skew Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Charging the Shade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Care & Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back CoverSafety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back CoverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

A Smooth Set-UpWe want you to love your new window coverings and that

includes having a smooth installation experience . If you

encounter any difficulties or questions, please reach out to us

for help . It’s why we’re here . Call us at 800 .248 .8888 or visit

www .smithandnoble .com/knowhow for more info on installation .

We recommend you hold on to all packaging until your window

coverings are fully installed . Should something go wrong

(we strongly doubt it), we want any potential returns to be as

painless as possible .

Customer Service Hours Monday — Friday: 6am — 7pm PT Saturday — Sunday: 7am — 4pm PT

smithandnoble .com

EverythingYou Need


First, make sure you have all the parts and tools required to install your shades.

ALL THE HARDWARE YOU’LL NEED: Pencil, screw-driver, ¼” nut driver, level, and a drill with a 1⁄16” drill bit.

Then find wooden studs where you’ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws.

It’s important when selecting a fastener to make sure it’s designed to support the weight of the shade . Follow the fastener manufacturer’s instruction from there on out .

Getting Started

Step 1 — Parts & Tools Overview

Motorization with No Headrail - Wand Control

Roller Shade

Bracket

Bracket

Wand

Bottom Bar

BRACKETS FOR SHADES WITH METAL VALANCE

HOLD DOWN BRACKET (OPTIONAL)

EXTENSION & SIDE BRACKET

(OPTIONAL)SCREWS 1/2" SCREWS

PENCIL & SCREWDRIVER (NOT INCLUDED)

POWER DRILL & LEVEL(NOT INCLUDED)

CASSETTEMOUNTING

BRACKET

BRACKET FOR SHADES WITHOUT HEADRAIL

METAL VALANCE BRACKET COVER

(OUTSIDE MOUNT ONLY)

NO HEADRAIL BRACKET COVERS OUTSIDE MOUNT

(OPTIONAL FOR INSIDE MT)

CABLE TIES

CABLE TIEMOUNTING

BASE

SPACER BLOCK

(OPTIONAL)

METAL VALANCE CLIP

CHARGERMOTOR ADAPTER


Inside Mount

The installation brackets are always mounted so that the short legs face in . Brackets must be in line and level . Shim brackets on inside mounts if necessary . The roller must be level for the shade to operate properly .

Attach each bracket using two screws either up through the top (A) or through the side (B) .

Inside Mount No Headrail with Bracket Covers

Place the brackets 1/16" from the window casing . This will create a gap for the bracket cover .

Attach each bracket using two through the top holes . Do not use side holes.

Outside Mount

The installation brackets are always mounted so that the short legs face in . Brackets must be in line and level . The roller must be level for the shade to operate properly .

First, hold the shade above the window so that it's perfectly centered over the window opening at the desired height . Mark the position of the brackets on the wall . Mount the brackets to the wall . Make sure the mounting brackets are level .

Attaching the Wand

While holding wires in the channel of the wand holder, use a #2 Philips head screwdriver to attach the motor adaptor and the wand holder to the end of the motor with the 1/2" screws provided . Be sure that the wires are not twisted or pinched .

Plug the control wire into the wand wire. The plugs will only fit together one way .

Step 2 — Mounting Brackets Step 3 — Attaching the Wand

1/16"Gap

No Headrail

A

B

No Headrail

No Headrail with Bracket Cover

No Headrail

Motor adapter

Wand holder

Wiring


Step 4 — Hanging the Shade Step 4 — Bracket Cover

Hanging Shades without Headrail

Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the shade .

Be sure the motor and roller end plug are inserted into the roller .

Hold the shade with the bottom of the motor facing the floor . Be sure the shade is fully rolled on the tube .

Insert the spring loaded pin end into the round hole of the bracket .

Push the motor end toward the pin end to compress the spring . The pin should compress half way in for best fit . Line up the hooks on the motor with the two slots in the bracket . Allow the spring to release and let the hooks go into the slots .

Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket .

Bracket Cover

Bracket covers come standard for outside mount shades and if requested for non-flush inside mounted shades. If your shade came with bracket covers, slide the bracket covers over the bracket until they snap into place .


Motorization with Cassette - 2 on 1 Headrail, with Wand Control

Overview

Shade with Wand Control

Inside Mount

Center the shade in the window frame . Mark the position of the brackets . End brackets should be located 2" in from each end . Mount the brackets to the top of the window frame . Make sure the brackets are aligned . Space additional brackets evenly between two end brackets .

2"

Side Mount (optional)

Measure from window sill up to desired mounting position . Mount Side Mount Brackets on each side of window frame as shown . Make sure to confirm that headrail will sit perfectly level . Once Side Mount Brackets are installed and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided .

Step 2 — Mounting Brackets

2 on 1 Headrail with Wand Control



Outside Mount

First, hold the shade above the window so that it’s perfectly centered over the window opening at the desired height . Mark the position of the bracket on the wall . End brackets should be located 2" from each end. Mount the brackets to the wall . Make sure the mounting brackets are level . If needed, space additional brackets evenly between two end brackets .

Extension Brackets (optional)

Optional Extension Brackets are used to project the back of the shade up to 21⁄2" from the mounting surface . Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided .

Spacer Blocks (Optional) Each spacer block projects brackets 3/8" away from mounting surface . Position spacer block behind mounting bracket, make sure the brackets are level and aligned . Attach each bracket using two screws . Screws should be long enough to secure the bracket to the mounting surface .

Extension Bracket

Headrail

Mounting Brackets

2"

Step 3 — Hanging the Shade

Hanging the Shade

Insert the rail into the opening of the bracket . Push the rail back until it is fully engaged .

Removing the Shade

To remove the shade, partially lower the shade and insert a flat head screwdriver as shown . Twist the screwdriver until the headrail disengages from the bracket .

Push the rail back until it is fully engaged




Overview

Inside Mount The installation brackets are always mounted so that the rounded edge faces down . Brackets must be in line and level . Shim brackets on inside mounts if necessary . The roller must be level for the shade to operate properly .

Attach each bracket using two screws either up through the top (A) or through the side (B) .

Outside Mount The installation brackets are always mounted so that the rounded edge faces down . Brackets must be in line and level . The roller must be level for the shade to operate properly .

The brackets can be mounted to wall or window frame . Make sure the mounting brackets are level . The brackets are always mounted so that the inner surfaces face each other . Brackets are mounted with the open end down .


A

B

Inside Mount

Metal Valance

Outside Mount

Motorized with Metal Valance - Wand Control


Step 3 — Attaching the Wand Step 4 — Hanging the Shade

Hanging the Shade Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the fabric .

Be sure the motor and roller end plug are inserted into the roller .

Hold the shade with the bottom of the motor facing the floor . Be sure the shade is fully rolled on the tube .

Insert the spring loaded pin end into the round hole of the bracket .

Push the motor end toward the pin end to compress the spring . The pin should compress half way in for best fit. Line up the hooks on the motor with the two slots in the bracket . Allow the spring to release and let the hooks go into the slots .

Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket .

Attaching the Wand

While holding wires in the channel of the wand holder, use a #2 Philips head screwdriver to attach the motor adaptor and the wand holder to the end of the motor with the 1/2" screws provided . Be sure that the wires are not twisted or pinched .

Plug the control wire into the wand wire. The plugs will only fit together one way .

Motor adapter

Wand holder

Wiring


Step 5 — Attaching the Valance Operating the Wand Control

Attaching the Valance

Insert a valance clip into the bottom front keyhole slot of each bracket .

Press the bottom firmly to lock into place .

Hold the valance on the top of the bracket first, and rotate downward.

Press until the bottom hook feature on the valance engages and is locked to the valance clip .

Bracket Covers - Outside Mount OnlyPress the covers onto the brackets as shown .

Pres

sPull

Locked"L" portion of valance

Wand ControlsPress the DOWN or UP button to lower or raise the shade . Press the STOP button to stop the shade at the desired position .

To fully raise or lower the shade, simply press the UP or DOWN button and then release . The shade will automatically stop when it reaches the upper or lower limit . (If the upper or lower limits are not set at the desired positions, see the Adjust Motor Limits section on the next page)

Note: Upper and lower limits stops are set at the factory. An intermediate, or "favorite" position is not set at the factory .

See page 19 for more information.

Up

Down

Stop/Favorite


Adjusting Shade Limits Optional

Hold Down Bracket Optional Hold Down Brackets are mounted with the supplied screws . With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned . Raise the shade, then screw the Hold Down Bracket into the mounting surface .

Skew Adjustment If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other .

If the shade is level and it still skews . use the Skew Adjustment Kit included with your shade to adjust the skewing .

If these suggestions don’t work, then please give us a call or visit our website.

Adjust Motor Limits (If Desired)The upper and lower limits stops have been set at the factory . If you need to make adjustments to the limits, follow the instructions below .

Press the SETTING button on the back of the wand and hold it in until the motor stops beeping . This will clear both the upper and lower factory limits and the favorite if one was set .

Set Upper Limit - Press the UP button to get the shade close to the desired upper limit and then press STOP button to stop the shade . Tap the UP or DOWN button to move the shade to the desired position. To save the location, press the SETTING button until the motor beeps .

Set Lower Limit - Press the DOWN button to get the shade close to the desired lower limit and then press the STOP button to stop the shade . Tap the UP or DOWN button to move the shade to the desired position . To save the location, press the SETTING button until the motor beeps .

Favorite PositionSetting and Using a Favorite Position - Use the UP or DOWN buttons to position the shade at the desired "favorite" position . First press and hold the SETTING button the back of the wand . While holding the SETTING button, press and hold the UP button. Release both buttons when the shade beeps .

With the shade at either the upper or lower limit, simply press the STOP/FAVORITE button to bring the shade to

Up

Down

SettingButton

Stop/Favorite

Hold Down Bracket

the "favorite" position . To go to the "favorite" position from any other location, make sure the shade has been stopped for at least three seconds before pressing the STOP/FAVORITE button .

Changing a Favorite Position - Use the UP or DOWN buttons to position the shade at the new desired "favorite" position . First press and hold the SETTING button on the back of the wand . While holding the SETTING button, press and hold the UP button. Release both buttons when the shade beeps . This establishes a new "favorite" position and erase the old .


Troubleshooting

If these suggestions don’t work, then please give us a call or visit our website.

PROBLEM SOLUTION

The shade does not work or runs slowly . Recharge the motor .

The shade only goes in one direction (up or down) .

The limit setting was unsuccessful and needs to be reset . See Adjusting Shade Limits pgs . 18-19 .

Shade goes up when the down button is pushed and goes down when the up button is pushed .

Press the SETTING button and STOP button at the same time . Hold until the shade jogs once . The shade should now move in the correct direction .

The motor beeps when operated Recharge the motor .

Charging the Shade

Charging Port

When the shade begins to operate slower than normal, or only beeps when you attempt to operate, it is time to charge the battery .

Plug the 8 .4v charger into the port on the wand . Plug the charger into an electrical outlet . A red light on the charger indicates that the battery is charging . To fully charge the batteries, allow the batteries to charge for at least 1 hour after the light on the charger turns green .

A typical charge cycle can take between 4-6 hours .

Warranty Service

The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty . The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship . Shades or blinds must have been properly installed . We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at 800.248.8888 and we’ll arrange for a repair or replacement ASAP .

© 2017 Smith & Noble Home, Inc. All Rights Reserved SN2046 SN_RS_M_W_2017_2

Care & Cleaning /Safety

Care & Cleaning Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat.

Safety First . Style Second To None™ Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today’s safety standards, including permanent tie-down devices and built-in cord stops. To protect young children and pets, there’s no better way to eliminate risk than to use one of our cordless products .

Child Safety

step by step installation instructions solar & roller …

Documents