stc_2013_14

8/22/2019 stc_2013_14

1/2

CIPETANNUAL CALENDAR

forSHORT TERM COURSES

2013 2014

CIPET PROFILE

Central Institute of Plastics Engineering & Technology

(CIPET) is a premier National Institution devoted to

Academic, Technology Support & Research (ATR) for the

Plastics & Allied industries in India. First CIPET campus

was established by Government of India in 1968 at

Chennai and subsequently 14 CIPET Campuses have been

established by Government of India in the country.

Today 15 CIPET Institutes Ahmedabad, Amritsar,

Aurangabad, Bhopal, Bhubaneswar, Chennai, Guwahati,

Hyderabad, Hajiput, Haldia, Jaipur, Imphal, Lucknow,

Mysore and Panipat are contributing through ATR

services to the industries in India and abroad.

All the centres have adequate infrastructural facilities in

the areas of Design, CAD/CAM/CAE, Tooling & Mould

Manufacturing, Plastics Processing, Testing and Quality

Control.

The courses are designed to produce technically trained

manpower for ready absorption in plastics industry. The

infrastructure facilities in terms of machinery and

equipment are continuously upgraded / modernized to

match with the technological development and needs of

the industry globally.

To keep the industries abreast with the new

technological developments and update the skill levels

of the personnel working in the industry, short-term

programmes, tailor-made programmes, modular training

programmes, technical seminars are conducted on

Design, Tooling, Plastics Processing, Plastics Testing and

Quality Assurance.

4 PLASTICS MATERIALS AND COMPOUNDING

(Code: T-2)

Period/Duration:12.12.2013 & 13.12.2013 / Two Days

Course Fee: Rs.4,000/- Target: 20

Course Co-ordinator: Dr. S SOUNDARARAJAN

Mobile No: : 98840 51606

Contents:

Thermoplastics Materials - Commodity Plastics,

Engineering Plastics, Speciality Plastics Thermoset

Plastics Introduction to Compounding need for

compounding plastics various additives and their

functions Antioxidants, Uv stabilizers, lubricants,

plasticizers, toughening agents, etc.

5. TESTING AND QUALITY CONTROL OF

PLASTIC MATERIALS & PRODUCTS (code :T-3)

Period/Duration: 24.10.2013 & 25.10.2013 / Two Days

Course Fee: Rs.4,000/- Target : 20

Course Co-ordinator: Mr. D. BASKAR AN

Mobile No: 98409 25720

Contents:

Introduction to Plastics Materials - various standards

and specifications Testing for mechanical, thermal,

Electrical and permanence properties Plastic product

testing Practical on Testing of Plastics Materials and

Products.

6. IDENTIFICATION OF PLASTICS MATERIALS

AND SELECTION CRITERIA FOR END USE

APPLICATIONS (Code: T-4)


Course Fee : Rs.4,000/- Target : 20

Course Co-ordinator: Mr. N MOHAN KUMAR

Mobile No: 9677123891

Contents:

Introduction to Plastics Materials, Identification of

Plastics by simple methods Application of instrumental

methods for identification of plastics chemical

methods for identification and confirmation of plastics

Plastics selection criteria for end use applications.

7. POLYMER ALLOYS & BLENDS AND

COMPOSITES (Code: T-5)Period/Duration: 25.07.2013 to 26.07.2013 / Two Days

Course Fee: Rs. 4,000/- Target: 20

Course Co-ordinator: Dr. M.ABDUL KADER

Mobile No 9677123883

Contents:

Polymer Alloys & Blends -Composite structure

properties and applications o

PC/ABS,PVC/ABS,PET/PBT, Nylon/PE,PP/EPDM, etc

Fibre Reinforcements & Coupling agents for Composites

Properties & advantages of Composites.-Applications

Compounding, Testing & Characterization of Composite

Commercial Trade names of alloys &blends an

Composites.

8. WOTKSHOP ON EFFECT OF ENVIRONMENTS

ON PLASTIC MATERIALS AND PRODUCTS

(Code: T-6)Period/Duration: 19.12.2013 & 20.12.2013 / Two Days

Course Fee: Rs. 6,000/- Target: 20

Course Co-ordinator: Dr. K P BHUVANA

Mobile No. 9894398623

Contents:

Effect of Weathering Natural & Accelerated Effect o

heat & cold cycle, Heat shock and Humidity Corrosio

resistance (effect of salt spray) Chemical resistance

Effect of Sterlization Environmental stress Crac

resistance (ESCR) Bio-degradability Phot

Degradability

DESIGN

8. INJECTION MOULD TECHNIQUES (Code:D-1)


Course Fee: Rs.4,000/- Target :20

Course Co - ordinator: Mr. S.LAKSHMANAN

Mobile No: 93801 20757

Contents:

Plastics Conversion Process Plastics Materials Moul

Making Technology Injection Moulding Design (Fee

System Cooling System Ejection and Clampin

System).

PROCESSING

1. INJECTION MOULDING PROCESS (Code:P-1)

Period/Duration: 26.06.2013 to 28.06.2013 / Three Days

Course Fee: Rs.6,000/- Target: 25

Course Co-ordinator : Mr. P. VIJAYAKUMAR

Mobile No: 9677123887

Contents:

Processing overview - Plastics Materials & its

Application - Injection Moulding Process - Advanced

Injection Moulding - Effect of Polymer Property on

Process Techniques - Process variables & its effects,Trouble Shooting - Mould and Product Design -

Processing Practical on Injection Moulding.

2. INJECTION MOULDING & BLOW MOLDING

PROCESS (Code : P-2)

Period/Duration: 12.02.2014 to 14.02.2014 / Three Days


Course Co-ordinator : Mr. R T. NAGARALLI

Mobile No: 96771 23882

Contents:

Processing Overview Plastic Materials & its application

Injection Moulding Process - Advanced Injection

Moulding - Blow Moulding Process Types - Effect of

Polymer Property on Process Techniques - Process

variables & its effects in Injection Molding & Blow

Moulding - Trouble Shooting - Mould & Product Design -

Processing Practical on Injection Moulding & Blow

Molding.

TESTING

3. BIOPLASTICS AND BIODEGRADABLE

POLYMERS (Code:T-1)

Period/Duration: 21.11.2013 & 22.11.2013- Two Days


Course Co-ordinator: Dr. SYED AMANULLA

Mobile No: 96771 23885

Introduction to bioplastics Biopolymers from

renewable Resources - synthesis and characterization

of biopolymers Compostable plastics Testing for

biodegradability of plastics as per ASTM, ISO and Indian

standards.

COURSE CODE - - TR-1 P1 T-5 D-1 D-2 D-3 T-3 T-1 T-4 T-2 T-6 P2

MONTH &

YEAR

APRIL, 2013 MAY, 2013 JUNE, 2013 JULY , 2013 AUG., 2013 SEPT., 2013 OCT., 2013 NOV., 2013 DEC., 2013 JAN ., 2014 FEB., 2014 MARCH,2014

8/22/2019 stc_2013_14

2/2

9. PRODUCT & MOULD DESIGN FOR

ENGINEERING PLASTICS IN AUTOMOBILE

APPLICATIONS (Code:D-2)

Period/Duration: 29. 08.2013 & 30.08.2013Two Days

Course Fee: Rs.8000/- Target : 20

Course Co-ordinator: Mr. A G S NEELGANNDAN

Mobile No: 9360098600

Contents:

Standard parts and its advantages ;Fundamentals of

Plastics Product Design; Developing a Functional

Injection Mould; Advanced Injection Mould Design / Hot

Runner / Unscrewing/ Collapsible core system;

Fundamentals of Engineering Plastics Material and its

Selection; Manufacturing and processing considerationson engineering Plastics; Rapid Prototyping / Stress

analysis and CAD/CAM/CAE, Mould Flow in Advanced

Design Concepts; Before assembly and after assembly

methods such as Insert, Over moulding, Gears, Plastics

threading, Mechanical fastening, welding, bonding and

Ultrasonic assembling process, press and snap fits,

painting etc.

Standardization/Design patenting and registration

10. Modern Concepts in Plastic Product Design

(Code:D-3)



Course Co-ordinator: Ms. S BARATHI

Phone No: 044-22254701-06(6 Lines) extn: 580

Contents:

Product design principles Role of CAD/CAM in product

design product design features conceptual product

design process analysis of product design methodical

approach in plastics product design-defects in molding

CAE &shared design information

TOOL ROOM

11. MODERN MOULD MANUFACTURING

TECHNIQUES (Code: TR1)



Course Co-ordinator: Mr. C H SHEKER

Mobile No:9677123890

Contents :

Mould Material and heat treatment Technology

Development in CNC Machine Tools, Cutting Tools and

CAD / CAM / CAE.

For whom / beneficiary

All the above courses are for Supervisors / Managers /

Proprietors from Plastics & Allied Industries.

6. PROGRAMMING & MACHINING CASE STUDI

ON CNC MILLING

Duration: 40 Hrs. Fee:Rs.6,000/-

7. PROGRAMMING & MACHINING CASE

STUDIES ON CNC LATHE


8. FAMILIARIZATION AND OPERATION PRACTICE

ON CMM

Duration: 40 Hrs. Fee: Rs.6,000/-

Eligibility : ITI/Diploma/B.E

Course Commencement :

First & Third week of every month

Special discount (10%) for group of candidates mor

than 10 in a batch

Course Co - ordinator: Mr. C. H. SHEKER

Mobile No: 96771 23890

TAILOR MADE COURSES

CIPET, Chennai can also conduct Tailor Ma

Courses exclusively for the participants from a

company either at companys premises or at CIPE

Chennai.

The contents of the course can be framed by t

customer or by CIPET as per company

requirements.

The duration of the course can be 2 to 5 days .

The course fee is Rs. 3000/- per person per day.

Minimum no. of participants is 20.

Course Co-ordinator: Mr. N.DURAI

Mobile No: 9677123895

FOR DETAILS CONTACT :

THE DEPUTY DIRECTOR,

CENTRAL INSTITUTE OF PLASTICS

ENGINEERING & TECHNOLOGY (CIPET)

GUINDY,CHENNAI 600 032.Tel No. : +91-44-22254701-6 lines

Fax : + 91-44-22254707

Email: [email protected]

Website: www.cipet.gov.in

Mobile Nos.: 9677123881 / 9677123895

CAD/CAM/CAE COURSES

1. Integrated Engineering Software Programme on

Automobile & Aerospace Product Development

with CAD/CAM/CAE

(IES-PAAP-CAD) (7 Softwares + Project)

Fee : Rs.1,00,000/- Duration : 6 months

Monthly Stipend : Rs.5,000/-

2 Advanced Masters programme in CAD/CAM/CAE

(any 4 Softwares + Project)

Fee : Rs.90,000/- Duration : 4 months

Monthly Stipend : Rs.5,000/-

3 Masters Programme in Product Development

with CAD/CAM/CAE(any 4 softwares + Project)Fee : Rs.75,000/- Duration : 4 months

4 Mechanical CAD with CAM Programming and

CAE Analysis (any 2 CAD/CAM

Softwares and one Analysis software + Project)

Fee: Rs.50,000/- Duration: 3 months

5. CAD using Pro-Engineer (or) Unigraphics (or) CATIA

Fee: Rs.10,000/- Duration : 100 hrs.

6. CAD/CAM Pro-Engineer (or) Unigraphics (or) CATIA


7. CAE using ANSYS (or) HYPERWORKS


8. CAE using MOLDFLOW

Fee: Rs.15,000/- Duration : 120 hrs.9. CAE using LS-Dyna

Fee : Rs.15,000/- Duration : 100 hrs.

10. Unig raphics Mold Wizard

Fee: Rs 10,000/- Duration: 80 hrs

11. CAD using Unigraphics with Mold Wizard


12. CAD/CAM using Unigraphics with Mold Wizard


13. Pro/Mold


14. CAD USING PRO/E WITH PRO/MOLD


15. CAD/CAM using Pro-Engineer with Pro/Mold


16. CAD/CAM using CATIA with Reverse Engineering

Fee: Rs 24000 /- Duration: 260 hrs

Eligibility : SL. No.1 & 2 Engineering Degree (Minimum)

or equivalent in Mechanical stream

Sl.No. 3 to 16 Diploma (Minimum) or equivalent

Fee concession available for

Sl.No. 5 to 16 - Conditions apply

Course Co-ordinator : MR. P. ESWARAN,

Mobile No. 9677123886

DESIGN COURSES

1 . PRODUCT AND MOULD DESIGN FOR INJECTION

MOULDED PLASTICS COMPONENTS USING

UNIGRAPHICS

Duration: 3 Months Target : 20

Batch A - 9.00 a.m to 1.00 p.m

Batch B 1.30 pm to 05.30 p.m

Date of Commencement :

06.05.2013, 01.08..2013, 04.11.2013, 20.01.2014

Fee: Rs.25,000/-

Pre - requisite: Knowledge in Unigraphics

Course Co-ordinator :Mr. A G S NEELAGAANTAN, Mobile No: 9360098600

2. AUTOCAD WITH MOULD DESIGN PRACTICE

FULL/ PART TIMEDuration: 120 Hrs (effective) Target: 20

Fee:Rs.4,000/-

Pre -requisite: Knowledge in Engineering Drawing.

Date of Commencement :

15.04.2013, 03.06.2013, , 19.08.2013, 17.02.2014

Course Co - ordinator :

Mr. S.LAKSHMANAN, Mobile No: 93801 20757

Eligibility:

Design Engineers, Mould & Tool Designers / Tool Makers

/Production Supervisors and also Candidates with Degree /

Diploma in Mech./Prodn./Chem./Tool Engg. / ITI aspiring to

become Design / Tool / CAD Engineers. Final year students

can also join.

CAM & CNC COURSES (Full Time/Part Time)

1. PROGRAMMING & MACHINING CASE STUDIES ON

CNC EDM,CNC WIRE CUT, CNC MILLING & CNC

LATHE

Duration: 160 Hrs Fee:Rs.22,000/-

2. PROGRAMMING USING CAD & MACHINING CASE

STUDIES ON CNC EDM & CNC WIRE CUTDuration: 100 Hrs. Fee:Rs.15,000/-

3. PROGRAMMING & MACHINING CASE STUDIES

ON CNC MILLING & LATHE


4. PROGRAMMING USING CAD & MACHINING CASE

STUDIES ON CNC WIRE CUT


5. PROGRAMMING & MACHINING CASE STUDIES ON

CNC EDM


NOTE :

COURSE FEE INCLUDES SERVICE TAX
mailto:[email protected]://www.cipet.gov.in/http://www.cipet.gov.in/mailto:[email protected]

stc_2013_14

Documents